Learn Simplest Way to Setup the Digitus WiFi N Repeater Using myrepeater

LEARN SIMPLEST WAY TO SETUP THE DIGITUS WIFI N REPEATER USING MYREPEATER

https://netmyrepeater.net

Are you facing trouble in setting up the digitus WiFi n repeater? Struggling in accessing the myrepeater web address? Thinking about how to set up the digitus WiFi n repeater through myrepeater? If the answer to these questions is yes then you do not need to be worried as you have reached the right place. The digitus dn-70181 is a network adapter which is used for both wired or wireless network connection in the home, office or small business. Without so much hand working, you can easily create several access points. Here, in this blog we have discussed the simple guidelines for the setup of the Digitus WiFi n repeater by accessing the myrepeater web address.

GUIDELINES FOR THE SETUP THE DIGITUS WIFI N REPEATE There are two different ways through which you can set up the Digitus WiFi n repeater including wireless repeater mode and wireless AP mode. In this section, we have described the steps under both methods:

METHOD 1: WIRELESS REPEATER SETUP IN REPEATER MODE Step 1: The first step is to plug in your repeater into the wall socket which is nearer to the gateway that exists already.

Step 2: Make sure that the gateway should be able to connect with the internet through wireless connection.

Step 3: After that, connect your device to the wireless repeater open network by using the WiFi settings on your computer, laptop or smartphone.

Step 4: Open any internet browser of your choice and enter myrepeater.net web address or the IP address 192.168.10.1.

Step 5: Thereafter, login with the default username and password.

Step 6: Choose the repeater mode under the wizard option.

Step 7: Next, you need to choose the existing 2.4 GHz WiFi network of your wireless router.

Step 8: In the next step, save the settings after entering the security key of the wireless network.

METHOD 2: WIRELESS REPEATER SETUP IN AP MODE The AP mode helps in creating the wireless access point. Carry out the below steps to configure the repeater as the AP mode through Ethernet wire:

Step 1: Take an Ethernet cable and use it to connect the wireless repeater to the existing gateway LAN port.

Step 2: After that, connect the repeater to the wall socket.

Step 3: Thereafter, join the open WiFi repeater network by using the WiFi device.

Step 4: Open any internet browser of your choice and enter the http://myrepeater.net web address or the IP address 192.168.10.1.

Step 5: Tap on the login button after entering the default login credential details in the respective fields.

Step 6: In the next step, choose the AP mode from the wizard manu.

Step 7: At last, tap on the Next button to complete the configuration.

Step 8: Finally, your wireless repeater is configured in AP mode. Ensure that the Ethernet cable from the repeater is not disconnected.

BY FOLLOWING THE ABOVE MENTIONED INSTRUCTIONS, YOU CAN EASILY COMPLETE THE SETUP OF THE DIGITUS WIFI N REPEATER USING MYREPEATER.NET WEB ADDRESS WITHOUT ANY HASSLE.