







Designed and developed for the nursing and residential care environment, providing safety features for both residents and carers. The Casa Elite is available as a standard or a low model; both bed variants allow the bed to be raised/lowered. The Casa Elite offers multiple profiling and positioning benefits which can reduce other potential complications of immobility.
• Standard sized electric profiling bed
• Bed can be raised or lowered to a comfortable height for the carer to perform any moving or handling of the patient
• Adjustable head, foot and knee sections
• Designed for single person installation
• Complaint to EN 60601-1-11*, EN 60601-1 and EN60601-2-52
Profiling Bed with side rails
The Casa Elite Low Profiling Bed, equipped with four sections and electric features, can be lowered significantly closer to the ground compared to a typical profiling bed.
Casa Elite Low
Width: 102.5cm (40”)
Length: 214cm (70”)
Platform Height (min): 19.2cm (7”)
Platform Height (max): 61.2cm (24”)
Profiling Bed without side rails and enclosed actuators
The Casa Elite Low Profiling Bed, equipped with four sections and electric features, can be lowered significantly closer to the ground compared to a typical profiling bed.
Casa Elite Low
Width: 102.5cm (40”)
Length: 214cm (70”)
Platform Height (min): 19.2cm (7”)
Platform Height (max): 61.2cm (24”)
Profiling Bed without side rails and exposed actuators
The Casa Elite Home Beech Low Profiling Bed, equipped with four sections and electric features, can be lowered significantly closer to the ground compared to a typical profiling bed.
Casa Elite Low
Width:
102.5cm (40”)
Length: 214cm (70”)
Platform Height (min): 19.2cm (7”)
Platform Height (max): 61.2cm (24”)
Standard Profiling Bed with side rails
The four-section electric Casa Elite Home Beech Profiling Bed allows patient repositioning for comfort and health, while enabling carers to enhance safety and access during handling and transfers.
Casa Elite Standard
Width:
102.5cm (40”)
Length: 214cm (70”)
Platform Height (min): 38.6cm
Platform Height (max): 80.6cm
Standard Profiling Bed With Side Rails + Dynamic Air Mattress system
A high specification, castellated nursing care pressure relief foam mattress with a multi-stretch vapour permeable, water resistant PU coated fabric cover.
• Support surface is castellated foam with a zonal area
• Includes a 270° zip with protective flap
• Top cover has a white inner substrate
• 2-way turn and X-ray translucent cover
Length: 199cm
A high specification, castellated nursing care pressure relief foam mattress with a multi-stretch vapour permeable, water resistant PU coated fabric cover.
• Includes a 270° zip with protective flap
• Top cover has a white inner substrate to assist in identifying signs of cover damage and strike-through
• 2-way turn and X-ray translucent cover
Topped with a high resilience foam with a large open cell structure which provides enhanced durability and airflow.
• Support surface is high resilience, high density, open cell foam with a zonal area to provide support to heels
• The cover is PU multi-stretch, water resistant and vapour permeable with stitched seams
Length:
Combines all the features of a high risk static mattress, with those of an airflow mattress system.
• Compatible with all the Harvest pumps
• Quiet operation
• Complete with fully welded cover
• 10 alternating cells powered by the low noise level pump
Combines the pressure redistributing properties of high specification foam, with dynamic therapy.
• Max inflate, Alternating mode & Static mode (remove pump)
• Auto-lock function
• Audible & visual alerts
• 1-in-2 alternating therapy on foam
• Pump dimensions: 31 x 21 x 12.5cm
• Turning pillow & 14 alternating cells on a foam base
The world’s first 4 in 1 hybrid mattress with foam-filled air cells, SensaGel adaptive foot cells and an in-use height of 6" for effective prevention and treatment of users up to very high risk.
• 90cm wide (120cm wide also available)
• Self adjusting foam filled air cells
• Adaptable heel zone with removable gel-foam pads
• Built in Evacuation System with straps and handles
• Independently removable cells
• Multi-stretch PU cover – welded seams
Auto-adjusting pressure redistribution system. Designed to effectively prevent and manage pressure ulcers in patients, while also reducing the risk of injuries for caregivers.
Quick Connector with Cap
Mattress can be transformed from a powered support surface to a sealed static air mattress for transportation need.
4-Way Stretch Top Cover
Offering low shear, low friction, vapor permeability, and moisture protection, coupled with optimal immersion and envelopment.
Auto-adjusting pressure redistribution system
CPR Knob
Quickly deflate the mattress for emergencies.
Special Design of Air Cells
Cell-on-cell design for continuous pressure support, even during power failures.
Prevent Bottoming Out while Sitting
Seat inflate mode manually manages the inflation of the air cells to improve stability and comfort during sitting.
Storage Strap
Side buckle under the base cover can be used to store rolled mattress very easily.
Domus Auto dynamic mattress system automatically calibrates in accordance with the patient's weight and position in the bed, eliminating the risk of injury due to the caregiver incorrectly entering the patient's weight.
• PlugnPlay system
• Heel Relief Function
• Multiple pressure care therapies
• Lock/Audible Alarm settings
What kind of patients are suitable for Domus Auto?
Bedridden, Patients requiring high level of pressure care.
What makes Domus Auto a great choice for care homes?
• CPR Knob (Not pullout tabs)
• Seat Inflate Mode
• It automatically adjusts pressure according to the weight and position of the user.
• Changing from one user to another does not require any changes in setting, it automatically calibrates according to the user weight.
• Auto panel lock means carers cant change any settings by mistake.
• 2 options available Domus Auto (250KG) and Domus Auto Bariatric (350KG).
Length: 200cm
Width: 90cm
Height: 20.3cm
Suitable for individuals who are at high risk of skin breakdown and require an immersive support surface as part of an overall plan of care.
• Top covers are multi-stretch, water resistant and vapour permeable.
• Includes a transport mode for up to 8 hours
• 2 CPR pull tags are available at the foot end
• Base contains 20 static cells
• Top contains 3 static head cells and 17 alternating body cells
• Cell Cycle Time, Theia Pump: 10 mins
• Cell Cycle Type: 1 in 2 (AB Pattern)
Length: 203cm
Width: 90cm
Depth: 20cm
Theia Digital Pump
• 2:1 alternating therapy
• Static mode
• Comfort controls
• Audible and visual alarms
• Fully EN60601-1, EN60601-1-2, and EN60601-1-11 compliant
Offers pressure redistribution and is suitable for use with profiling beds as part of an overall plan of care.
• Top covers are multi-stretch, water resistant and vapour permeable.
• The cover includes a white inner substrate to assist with identifying strike-through and cover damage
• Includes a transport mode for up to 8 hours
• 17 cells (cell on foam) 3 static head cells & 14 alternating cells
Length: 203cm
Width: 90cm
Height: 17.7cm
The Permapad cushion range is made from castellated foam that provides pressure redistribution for users whilst seated.
• Support surface is castellated foam
• Includes a 270° zip with protective flap
• 2-way turn
• Fabric covers are PU coated, multi stretch and vapour permeable
The repose cushion comes in a pump that inflates it in seconds, ensuring the correct pressure automatically.
• Repose can be cleaned and reused
• Contents: 1 x Cushion & 1 x Small Pump
• Inflated Dimensions L 450mm x W 450mm
• Max Patient Weight 139kg
• Repose is supplied with a 3 year warranty as standard.
Ensures that pressure on the foot is relieved totally.
• Low air technology distributes weight evenly
• Lightweight for easier transport
• Repose can be cleaned and reused
• Can be used with other dynamic or static support surfaces
Protect users by offloading heel pressure, reducing the risk of ulcers and foot injury for high-risk individuals.
• Supplied in pairs
• Wipe clean using lukewarm water and soap only
• Do not dry clean, tumble dry or iron
Our range of PolyCotton Linen have been designed to allow easy processing whilst remaining durable, long lasting with minimal ironing.
• 50% polyester / 50% cotton
• Wrinkle resistant when machine washed
Available in:
Pillow Covers (pair)
LN-BL200* Fitted Sheets (single)
LN-BL300* Flat Sheets (single) £10.20
LN-BL500* Duvet Covers (single) £15.50
*Prices and offer for Cream/White Only Visit our website/contact our office for all other colours
A Knitted Sheet with multi-directional stretch which, unlike conventional woven sheets, means that this one sheet will fit the vast majority of healthcare mattresses.
• Multi-directional stretch: fits the majority of mattresses
• Money saving: can save up to 30% on total laundry costs
• Time-saving: Requires no ironing and 1 person to make the bed
• Flame Retardant to EN12952
Available in:
• Trusted: Used in over 100,000 healthcare beds within the UK *Buy 4 Get 1 Free Offer valid on cream sheets in FR and NON-FR
Supports elderly or disabled people with limited mobility. Ideal for those extra support when standing or sitting in a chair, can also be used to transfer patients.
• Powder-coated steel construction, offering durability and stability.
• Includes a soft, adjustable knee pad.
• A Linak® control system is used as standard. The system includes intuitive hand controls making it easy to raise/lower the lifting arm.
• Includes emergency lowering, manual lowering and an emergency stop button.
• Lightweight frame, large swivel castors, ergonomic handle, and manually operated leg opening and closing
Crafted to ensure secure and user-friendly performance during moving and handling activities, including standing, transferring, and toileting.
• A choice of user hand grips
• Emergency stop button
• Height adjustable leg support
• Easy roll 100mm rear castors with brakes
• Four sling attachment hooks
• Easy to use handset
• Includes removable, rechargeable battery
For users who are weight bearing, but need assistance from a seated to a standing position. Made from polyester
Small
Fully padded with an adjustable body belt, also supporting the user under the legs. Made from polyester
• Lightweight frame is easy to manoeuvre
• Fully electric - lifting and leg opening
• Four 75mm 360° castors, rear castors include brakes
• Compact for easy access through standard doorways
• Four point spreader bar as standard with secure hooks
• Has been designed to fold easily,
• Can be stored and transported vertically
• Battery can be charged on or off the hoist
• Emergency stop and manual lowering function A
Designed to encourage a forward knee movement during raising and lowering of the individual.
• Compact design providing stable assistance in standing, transferring and toileting
• Padded leg support with tool free, single-handed adjustment
• Easy to clean surfaces
• Single Action Braking System
• Main bar angle - 75°
Compatible Slings
Deluxe Feeder Sling available in S,M, L Patient Turner Belt available in XS, S,M, L
Enables users to participate in transfers, maintaining patient independence, also ideal for transferring patients from room to room.
• Very manoeuvrable and light to use
• Easy to wipe-clean surfaces
• Narrow width enables the carer to manoeuvre easily through standard doorways
• Substantial footplate provides stability
Suitable for hospital laundering using standard hospital laundry guidelines HSG(95)18.
• Can be laundered for use with different individuals
Designed to slide into position then lock, preventing patient from slipping within chair/bed.
• Quilted tubular design
• Wash Temp 71°C/159°F
• Tumble dry low heat max 50°C
• Anti-slip lining to uphold patient security
• Shaped handles designed for all hand sizes
• Washable at 71°C
Made from a Transtex, a specially developed fabric that is silicone coated on both sides to provide a slick, low friction finish.
Assist the user with rotating and repositioning when getting in and out of bed.
• Smooth satin material enables ease of movement
• Washable at 30–74°C
affordable washable, bed repositioning system
Offers a ‘FastFit’ application with padded leg support for additional comfort during transfers.
A multipurpose sling which is suitable for individuals with good neck stability and maintains an upright sitting position during transfers.
A strong yet comfortable sling specifically designed to allow access for toileting, dressing and personal hygiene care.
This sling has an integral head and trunk support panel, for individuals who require additional neck support, and maintains an upright sitting position during transfers.
This construction has naturally ventilating properties giving a breathable and cushioned finish.
• Designed to remain under the user, reducing the regular application and removal of slings
• Seamless bottom edge and is complimented with a thinner padded pommel for support
Size
Small
?
Do you have residents who are bed bound or immobilised, spending over 12 hours in bed everyday?
? Are your staff manually turning the residents in bed?
?
Do you have to document turning each resident in bed every 2 hours to comply with the care plan?
Simplify CAREPLAN management by automating up to 30 degrees turning in bed
Reduce staffing cost by eliminating the need to have carers turn resident in bed every 2-3 hours
High level of pressure relief and comfort settings
Reducing patient handling complexity and patient discomfort
Turning patients at a 30° lateral position (lowest max pressure in lateral position) every 4 hours on an alternating pressure mattress significantly reduces pressure ulcer incidences by 85% and labor-intensity for caregivers and improves patient comfort and overall effort- and cost-efficiency. *1.*2.
The Optima Series has been integrated into long-term post-acute care in multiple medical centres worldwide. Clinical Studies on the effectiveness of the Optima Turn have been undertaken in the UK and Germany, demonstrating significant improvements in pressure ulcer care and prevention.
Using the Optima Turn as a Comprehensive Mattress Replacement
A 30° turn angle is easier to implement and more effective in improving skin blood circulation than a 90° turn, which is usually performed. 62% of nursing staff suffer lower back injuries from handling patients, significantly increasing burnout, escalating healthcare shortages, and decreasing care quality and patient outcomes.
1. Defloor, T. “The effect of position and mattress on interface pressure.” Applied nursing research : ANR vol. 13,1 (2000): 2-11. doi:10.1016/s0897-1897(00)80013-0
2. Defloor, Tom et al. “The effect of various combinations of turning and pressure reducing devices on the incidence of pressure ulcers.” International journal of nursing studies vol. 42,1 (2005): 37-46. doi:10.1016/j.ijnurstu.2004.05.013
Optimizes caregivers' workflow and safety during repositioning regimes by automating 30° turn with different turning cycle options, reducing nursing injuries and bottlenecks.
Simply adherence to repositioning schedule
The slow and consistent turning speed provides a gradual repositioning experience, improving patient comfort and tolerance towards turning.
Duration for a complete turning cycle (left & right for each dwell time setting:
• 10 minutes = 60 minutes/cycle
• 20 minutes = 100 minutes/cycle
• 30 minutes = 140 minutes/cycle
• 60 minutes = 260 minutes/cycle
Designed to fit each rail neatly. The top and bottom pads are connected by a strong see-through net.
• Made with PU (Polyurethane Fabric)
• Impermeable
• Durable
• Antibacterial
• Length - 200cm (79") x Height - 76cm (30")
Designed to fit onto standard height wooden side rails, providing protection for users in bed.
• Made with PU (Polyurethane Fabric)
• Impermeable
• Durable
• 200cm
• Antibacterial
• Suitable for profiling beds with 2 side rails
Top and bottom pads are connected by a strong seethrough net which ‘concertinas’ to save space when the sides are lowered.
• Quilted material
• Washable at up to infection control temperatures
Made with a foldable, wipe clean breathable material, comes complete with durable carry straps.
The unique cotton rich construction has been developed to alleviate snagging and minimise shrinkage.
• Washable up to 95°C
• 90% Cotton / 10% Polyester
• 420 gsm
• Quick drying
• Can be thermally disinfected
Flannels
*Face Flannels sold in packs of 12. Hand Towels and Bath Towels sold in packs of 6. Please note these products are not sold individually
Our Tilt-in-Space Shower Chair is the perfect choice for those clients who require extra support when seated.
• Adjustable headrest, cover and footrest with rubber-moulded pad and mesh calf strap
• Full stainless steel frame
• Full electric pack including hand control
• Mesh cover
• 8” Seat Width, Horseshoe Seat & Full Footrest
Support users with limited mobility, comes in various widths to suit user needs.
• Manufactured in the UK from UK-sourced raw materials.
• Built-to-last, robot-welded steel frame and non-rust components.
• Antimicrobial powder coating prevents harmful bacteria.
• Chair reclines up to 40° for additional comfort.
Features a backrest and armrests for increased support. They are hard wearing, rust resistant and feature a polypropylene (PP) moulded seat.
• Free-standing shower chair
• Manufactured from strong tubular steel
• Coated with hard wearing, peel resistant and anti-corrosive thermoplastic
• Comfortable polypropylene moulded seat
• 5 x 6mm drainage holes in seat
• Easy e-clip height adjustment
Adjustable height, mobile shower chairs with fixed armrests.
• Adjustable height, wheeled shower chair with backrest and armrests
• Swivelling castors ensure manoeuvrability
• Coated with hard wearing, peel resistant and anti-corrosive thermoplastic
• A polypropylene moulded seat
• 5 x 6mm drainage holes in seat
Provides a convenient toileting facility when access to the toilet is not possible.
• Recess-free castors prevent water trapping
• Heat-sealed vinyl over seat cushion provides comfort
• Vinyl backrest offers a comfortable support and is removable tool-free
• Four braked castors
• Sturdy tubular steel frame with hard-wearing silver finish provides longevity
• Soft, wipe-clean polyurethane (PU) armrests
• Height adjustable plastic footrests
• Plastic injection-moulded removable seat
• Supplied with rear-loading bucket and lid with 5 litre capacity
A stationary, modular shower and commode chair, featuring a detachable backrest and armrests to facilitate user preference and side transfers.
• Can be used in multiple configurations; stool, stool with armrests, chair without armrests, full chair (with backrest and armrests) and also as a commode
• Manufactured from plastic and aluminium
• Features cushions for the seat and backrest
• Complete with a bucket and lid
A versatile solution for showering and toileting needs, featuring a seat moulded for comfort and tool-free adjustment options.
• 4 substantial (12.7cm (5")) braked castors
• Polyurethane seat, seat-infill, back and armrests are waterresistant
• Bright blue upholstery provides strong colour contrast for visually impaired users
• Seat is moulded for comfort
• Lightweight, rustproof aluminium frame
The Wireless Floor Sensor Mat is a robust long-life mat and is most effective when placed at the bedside or doorway; activating the alarm when a user leaves their safe zone.
Can be connected to a nurse call system through the Alerta Wall Point Receiver for centralised activation, or used on its own, independent of a nurse call system.
• Wireless connect-and-play system
• No cables, extra safe and versatile
• Genuine non-slip base
• Long lasting welded seals and strong wiring
• Hygienic, antibacterial easy-clean material
• Large size avoids chance of overstepping
• Dementia friendly
• Dimensions: 60 x 90cm (23.5 x 35.5")
Uses infrared technology to activate the alarm when body movement is detected within the range of the infrared beam.
Most effective when mounted at the door or bedside; activating the alarm when a user leaves their safe zone and breaks the infrared beam.
• Wireless connect-and-play system
• No cables, extra safe and versatile
• 95m wireless range from transmitter to receiver
Can be connected to a nurse call system and wirelessly paired with up to 5 of our wireless fall prevention products
Features:
• High, low and silent volume control
• Low battery alert
• Mains or battery powered
• Takes 2x 1.5v AA batteries
Includes: 1x Floor Alertamat, 1x Wireless Transmitter (must be used with Wall Point Receiver - sold separately, see page 11)
W-WPR Standalone Receiver
W-WPR-C Courtney Thorne
W-WPR-C4 Clear Plug, 4 Groove
W-WPR-C6 Clear Plug, 6 Groove
W-WPR-D Stereo Jack
W-WPR-Q Quantec Systems
W-WPR-S Mono Jack
W-WPR-C6 ATX4000
W-WPR-C6TSPRO ATX3000plus, Touchsafe pro and ATX5000
WPR-D-ECLIPSE Eclipse
UNSURE WHICH CONNECTION TYPE YOU NEED? CONTACT OUR OFFICE FOR ASSISTANCE
Most effective when placed at the bedside or doorway; activating the alarm when a user leaves their safe zone by stepping on the mat.
Can be connected to a nurse call system with a 3 metre cable provided for centralised activation, or used on its own.
• Genuine non-slip base
• Long lasting welded seals and strong wiring
• Hygienic, antibacterial easy-clean material
• Large size avoids chance of overstepping
• Dementia friendly
• Connect to nurse call system or stand-alone alarm monitor
• Breakaway cable to reduce trip hazard and prevent damage
Dimensions:
• W x 90cm L x 60cm
Whats included:
• 1x Floor+ Alertamat
• 1x 3 metre cable
• Connect to nurse call system or stand-alone alarm monitor
Can be connected to a nurse call system with a 3 metre cable or used on its own, independent of a nurse call system to give localised alerts through the Alerta Alarm Monitor (supplied as part of the system).
• Plug-and-play system
• Hygienic, antibacterial easy-clean material
• Dimensions: 25 x 76cm (10 x 30")
• High, low and silent volume control
• Multiple choice alarm tone
• 0, 2 or 4 second delay to reduce false alarms
• Takes 1x 9v battery
• Rails surround the edges of the table
• Easy wipe clean surfaces
• L Style over bed tables are fixed for a fast assembly
• Easy wipe clean surfaces
• Tables support objects up to 10kg (22lb)
• Height adjustable with a split leg base
• Adjustable table top angle
Fixed for a fast assembly, the tables come in two parts and simply slot together, with no need to fix in the base. Code
715BE Without Castors
With Castors
The Overbed Table features individual "U-Shaped" legs and is suitable for use with divan beds and chairs.
• Height and angle can be easily adjusted
• Tabletop angle can be adjusted up to 45°
• Melamine coated top and all round lipped edging
• Tables support objects up to 15kg (33lb)
• Easy wipe clean surfaces
Features an easy lift handle to adjust the table height with minimal effort.
• Wheelchair access base
• Braking castors
• Max weight capacity: 15kg
• Height adjustment range: 80-105cm
• Table top dimensions: 80 x 40cm
Assists in improving the appearance of puree meals as well as texture modified meals, ideal for those with problems swallowing food.
• Material: Silicon
• Glossy non-stick finish
• Microwave Safe and Dishwasher Safe
• Stain Resistant and Odour Resistant
• Freezer Safe to -40°C
• Oven Safe to 230°C
CA82201 Chicken Breast
CA82202 Sausages
CA82204 Green Beans
CA82205 Pumpkin
CA82208 Pork Chops
CA82209 Sliced Meat
CA82210 Meat Cubes
CA82211 Chicken Leg
Features a vinyl waterproof backing and popper fastenings.
Perfect for catching spills and dribbles. Flame Retardant to British Standard BS 7175. Machine washable up to 40°C.
Washable popper fastening tartan clothing protectors.
Available in green and red, these bibs measure 86 x 45 cm, feature superior waterproof backing, and are washable up to 40°C.
A disposable bib with a front pocket.
Each sized 37 x 58 cm, made with highly absorbent tissue and a waterproof backing for protection against liquids. 100 bibs per pack / 8 packs per case
An MDD and Class III approved hoist weighing attachment, ideal for use in care homes, hospitals and in the community.
• Designed to fit onto your coat-hanger shaped spreader bar hoist easily
• Clear, digital display shows the weight of the patient to the nearest 100, up to a capacity of 200g
• Class III Approved
• MDD Approved
• Full numeric keypad to measure BMI in seconds
• Lightweight and portable
4 Year Warranty 4
The M-225 is a Class III Approved portable Chair Scale, perfect for weighing elderly and disabled patients. It’s designed with the user in mind and features hinged arm and footrests for easy patient transfer.
Power Supply: 6 x AA Batteries
Graduation: 100g
Capacity: 250kg 4 Year Warranty
Suitable for indoor and outdoor use, given its robust steel frame and its easy fold mechanism for transportation.
• Folds easily for storage/transportation
• Crash test compliant
• Vinyl upholstery and padded armrests
• Plastic footrests can be easily height adjusted
• Attendant or user accessible parking brakes on rear wheels ensure safety
• 32cm (12.5") rear wheels
See page 11 for our range of Hoists!
To be permanently in place under anti pressure mattress. This fixes permanently to the bottom of a flexible foam mattress by means of strong elastics.
• Features safety belts to hold the patient on the mattress and pulling straps at each end.
• The combination of slippery sheet and mattress which will flex, will pass through narrow doorways and down stairs.
• The holding strap at the head is to hold back on stairways. Two people required. No transferring of patient. There are pockets for the straps.
Used for transporting a user to safety during an evacuation.
The user is placed on the sledge, secured with the chest and leg straps and pulled to safety using the straps at each end.
• The flexible sledge and slippery underneath will allow controlled and easy access through doorways
• Supplied in a wall mountable zip bag for easy storage and immediate accessibility in emergency.
The sheet can be left permanently on the mattress by way of the large pockets to accommodate most depths of mattresses due to the discreet elasticated corners.
• The unit has large pulling straps at either end to aid negotiation of stair ways. With securing straps to hold the patient when in transit.
• Elongated foot pocket with securing webbing to steadily hold the users feet in place.
During the agitation of the washing process, the water soluble strip dissolves in hot or cold water releasing the contents of the sack for a normal washing procedure.
• Dimensions: 450 x 620 x 650mm
A conventional solution for dry soiled linen collection, designed to fit a wide range of soiled linen carts.
• 100% Polyester Bags
• Size - 70cm x 101cm
A robust range of stainless steel carts designed to ensure the optimum method of separation and collection of soiled linen.
• Each cart comes with wheel brakes and colour coded lids for ease of sorting
LC03 3-Bag Cart (White, Red & Blue Lid)
Cart (White, Red, Blue & Green Lid)
• Absorbent, re-usable, colour coded
• 50 cloths per pack
• Available in red, yellow, green or blue
• Available in all 4 hygiene colours
• Extra absorbent
• Suitable for cleaning all surfaces
• Heavy duty
• Pack of 10
3 Ply type IIR fluid resistant masks made from soft non woven material
• High bacterial filtration efficiency (BFE) ≥ 98%
• Latex & fibre glass free
• EN 14683:2019 + AC:2019
• Features a flexible nose wire clip
Face Masks
Our Hand Care Anti Bacterial Hand Gel is essential for the care environment to protect both the carer and patient.
• Added moisturiser to protect your skin and soften hands
• Contains 70% alcohol by volume
• Non-toxic; leaves no harmful residue
• Available in 100ml or 250ml
Designed to disinfect medical surfaces and non-invasive equipment quickly and easily.
Contain 200 sanitising wipes which can be used to wipe down surfaces including rubber, plastic and metal.
Our protective covers are designed to minimize crosscontamination and maintain hygiene standards.
Our range includes Mob Caps, Oversleeves and Overshoe Covers.
An anatomically-shaped pad suitable for moderate to heavy incontinence for both active people and bed-ridden people.
An all-in-one product with adhesive tabs, suitable for moderate to heavy incontinence.
Suitable for moderate to heavy incontinence. The elasticated waist means that the product is comfortable and discreet.
Made of tough durable construction, fully waterproof with 1 litre absorbency.
• Available in 5 colours
• Machine washable and dryable on low heat only
• 300 wash guarantee
Offers a great combination of comfort, performance and price. The highly absorbent soaker layer is complimented by a long life top surface and a fluid proof barrier.
• Size - 85cm x 90cm (Single)
Soft and comfortable for both men and women, great for day and night.
Our dry patient wipes are ideal for cleaning the skin, a critical task for any carer. These dry wipes are soft and offer great strength and absorbency.
• 100 wipes per pack
• 32 packs a case
Suitable for all over skin cleansing. Contains healing properties of Aloe Vera and coconut oil moisturises the skin
Disposable and manufactured from man-made synthetic rubber, Handi Blue Nitrile Gloves offer high levels of puncture and chemical resistance, providing a comfortable fit with good sensitivity and grip.
• Latex free
• Low protein AQL 1.5
• Textured finger grip
• Ambidextrous
• Single use
• Non-sterile
• Available in S, M or L
• 200 gloves per box / 10 boxes per case
High quality, cobalt blue, ultra-thin, nitrile powder free finger-textured examination gloves.
• 2.2mil thickness
• EN455 CE Class 1 medical grade
• EN 420, EN388 & EN374
• EN1186 Food Contact Approved
• AQL 1.5
• Finger-textured , Non-Sterile
• Beaded cuff for ease of donning
• 100 gloves per box
• 10 boxes per case
Code Description
EN455, EN420, EN388, EN374, EN1186
An excellent alternative to latex gloves for those who are sensitive or allergic to latex.
• Beaded cuff
• Ambidextrous
• 100 gloves per box / 10 boxes per case
proteins and chemical allergens, the drying effects of powder on the skin and irritation.
• AQL 1.5
• Single chlorinated high grip glove
• 100 gloves per box / 10 boxes per case
Developed as an aid for moving and handling residents around in nursing home environments It is an ideal transfer aid and provides the user with great comfort and support.
• Angle adjustable and removable legrest which automatically moves under the seat when the chair is tilted forwards.
• Velcro attached ergonomically designed headrest, can be easily adjusted.
• Lap belt is fitted as standard for additional safety.
• Handy storage pocket on the backrest.
• Easy to manoeuvre brake wheels (12.5cm) which rotate 360 degrees.
• Directional wheel enables the chair to be transferred in a straight line.
• Good hoist access for easy moving and handling.
• Brown leather style upholstery on the outside, together with 2 way stretch, breathable Dartex material on the inside.
Seat Width: 39, 45, 51cm (16, 18, 20”)
Seat Depth: 41, 44, 47cm (16, 17, 18.5”)
Seat Height: 45, 49, 53cm (18, 19, 21”) Depth: 89cm (35”)
67 - 72cm (26 - 28”)
Armrest Height: 23cm (9”)
Shell Angle: -3° Transfer Forward +27° Backwards
Seat Weight: from 29 kg (4.5st)
(including