MULTI PURPOSE WINTER PU FOAM Description
Attention
AKFIX 807 is a single-component, moisture-curing and self-expanding PU foam especially developed for applications at temperatures of as low as -10 °C.
Storage above +30 °C and below -5 °C shortens the shelf life. Should be stored and transported in vertical position. For better performance,the can should be kept at room temperature for at least 12 hours before the application.
Properties
High yield&stability and adequate pressure at frost temperatures. Excellent adhesion on most materials. Very good filling capacity. High thermal&acoustical insulation value. Resistant to moisture, heat, water and many chemicals.
Applications Mounting and insulating of door and window frames. Filling and sealing of gaps, joints and cavities. Filling of penetrations in walls. Improving thermal isolation in cooling systems.
Safety Contains: Diphenylmethane-4,4'-Diisocyanate. Harmful by inhalation. Irritating to eyes, respiratory system and skin. Do not breathe spray/vapour. Wear suitable protective clothing and gloves. Use only in well-ventilated areas. Pressurized container. Keep away from direct sunlight and do not expose temperatures over 50 °C. Do not pierce or burn, even after use. Keep away from sources of ignition, no smoking. Keep out of the reach of children
PRODUCT
Instructions Application temperature is between -10 °C and +30 °C. Shake the can vigorously at least for 15 seconds before using. Screw the adapter on the valve. Always moisten the surfaces to be adhered to before applying the foam. Always handle the cannister with the valve pointing downwards. Activate the foam by pressing the valve. Fresh foam can be cleaned by AKFIX FOAM CLEANER or acetone.
18
807
Technical Data Tack - Free time (1cm width)
Volume
Package
Stock Code
807
750 ml
12
FA111
807
500 ml
12
FA112
807
300 ml
12
FA113
:7±2 min (ASTM C 1620)
Cutting time (1cm width)
:40±5 min (ASTM C 1620)
Cure time
:24 hours
Shelf Life
Expanding volume
:1 - 1.5 times
Foam colour
:Light yellow
15 months if stored at room temperature.
Yield
:30 - 45 L (ASTM C 1536)
Temp. resistance (after cure)
:-40 °C to +100 °C
Fire class of the cured foam
:B3 (DIN 4102-1)
www.akfix.com