Engine - Engine air compressor
Air compressor - Remove CX6.90 FPT CURSOR 9 STAGE IV CX6.90 FPT CURSOR 9 TIER 3 CX6.90 Laterale FPT CURSOR 9 TIER 4B (FINAL) AND STAGE IV
---
1. Bleed the air from the system by opening the drain (2) at the bottom of the air reservoir (1).
ZEIL06CS0207A0B
1
ZEIL11CX0671A0B
2
ZEIL11CX0671A0C
3
2. Remove the hose (3) from the fitting in the compressor. NOTE: Protect the air inlet and outlet ports from dirt ingress. 3. Disconnect the small tube (4) from the fitting in the compressor. 4. Loosen the clamp (5) and remove the elbow (6) from the fitting in the compressor.
5. Drain sufficient coolant from the engine cooling system to allow removal of the coolant lines. 6. Remove the coolant lines (7) and (8). 7. Remove the air compressor pump (10) from the engine by removing the three Allen screws (9). Make sure to capture the seals as the pump (10) is pulled away from the engine.
51431545 08/02/2018
10.3 [10.450] / 13