Gulfport Industries - Largest selection of parts and components for the door industry!

2012

THE LARGEST SELECTION OF PARTS & COMPONENTS FOR THE DOOR INDUSTRY IN NORTH AMERICA w w w. g u l f p o r t - c o r p . c o m TAMPA FLORIDA USA tel. 1-800-263-0808

fax. 1-800-663-3800

e-mail. info@gulfport-corp.com

LOCKWOOD N1500

n INCREDIBLY EASY TO INSTALL n HIGHLY COMPETITIVE n TOP OF THE LINE QUALITY n AVAILABLE IN ALL ARCHITECTURAL FINISHES n COVERS 161 PREP

Index Products

Page

1.

Frame Anchors ............................................................................... 1

2.

Hinge Reinforcements ..................................................................... 8

3.

Reinforcements .............................................................................. 11

4.

Glazing Bead.................................................................................. 17

5.

Screws .......................................................................................... 18

6.

Lite Kits.......................................................................................... 20 Lite Kits & Accessories................................................................... 21 DR340 Snap-In Lite Kit Sizing Chart............................................... 22 DR345 Lite Kit Sizing Chart ............................................................ 24

7.

Door & Frame Templates ............................................................... 25

8.

Louvers .......................................................................................... 27

9.

Astragals ....................................................................................... 28

10. Fillers ............................................................................................. 30 11. Shims ............................................................................................ 33 12. Miscellaneous

(Gaskets, Capping Channels, Edge Guards, Strike Boxes and more)

.......... 35

13. Strikes............................................................................................ 41 Exit Device Strikes.......................................................................... 45 Specialty Strikes............................................................................. 47 14. Shop Supply .................................................................................. 50 15. Production Machinery & Progressive Dies...................................... 51 16. Locks and Exit Devices................................................................... 53 17. Hardware

(Flush Bolts, Surface Bolts, Floor & Wall Stops, Mullions, Kickplates and more) .....

55

18. Pulls & Pull Plates .......................................................................... 61 19. Door Holders.................................................................................. 62 20. Door Closers .................................................................................. 62 21. Hinges ........................................................................................... 63 22. Door Savers ................................................................................... 66 23. Latch Protectors ............................................................................ 72 24. Thermal Break Joiner .................................................................... 74 25. Thresholds, Weatherstripping, Sweeps ......................................... 75 Gulfport reserves the right to discontinue models and/or make changes in materials, design, specifications, parts, etc. at any time without notice or without incurring any obligation or liability on models built prior to change. Gulfport does not guarantee suitability of any specific product for any specific application.

FRAME ANCHORS PART NUMBER

DESCRIPTION

ILLUSTRATION

EXISTING MASONRY ANCHOR FR 100

FOR 4 3/4" - 6 3/4" FRAMES IDEAL FOR ALL EXISTING WALL APPLICATIONS LARGER SIZES AVAILABLE

~ 200 PER BOX

MASONRY TUBE ANCHOR FR 101

ONE SIZE FITS 4 3/4" - 8 3/4" IF YOU USE TUBE ANCHORS, THIS IS THE ONE FOR YOU! IT REPLACES ALL OF THE OTHERS. EVERY ANCHOR IS MARKED FOR THE DIFFERENT FRAME PROFILES....

SIMPLY BEND IT AND INSTALL IT. ”AMAZING!“ LARGER SIZES THAN 8 3/4" AVAILABLE.

~ 200 PER BOX

MASONRY TUBE ANCHOR FR 101 F

FIXED SIZE FOR 5 3/4" LARGER SIZES AVAILABLE.

~ 200 PER BOX

MASONRY ANCHOR PLATE ONE SIZE FITS 4 3/4" - 8 3/4"

FR 101 P

FR 102

FR 104

FR 105

FR 106

SAME AS FR101

(WITHOUT TUBE) EXCEPT WITH THIS ONE YOU CAN MAKE YOUR OWN ”T“ ANCHOR OR “OFFSET” ANCHOR

STUD BOLT ANCHOR 2" x 3/8" DIA. ~ 50 PER BOX

STUD BOLT ANCHOR 4" x 3/8" DIA. ~ 50 PER BOX

STUD BOLT ANCHOR 5" x 3/8" DIA. ~ 50 PER BOX

STUD BOLT ANCHOR 6" x 3/8" DIA. ~ 50 PER BOX

PAGE 1

FRAME ANCHORS PART NUMBER

FR 107

FR 107 A

FR 108

FR 109

DESCRIPTION

ILLUSTRATION

WOOD STUD ANCHOR 4" LONG ~ 50, 100 OR 200 PER BOX

WOOD STUD ANCHOR 5" LONG ~ 50, 100 OR 200 PER BOX

THRU-BOLTS 1/4" DIA. FOR DOORS 1 3/4" OR LESS. IDEAL FOR LATCH PROTECTORS, DOOR SAVERS, LOUVERS, ETC. AVAILABLE IN ALL FINISHES, SIZES, AND OTHER DESIGNS.

THRU-BOLTS 5/16" DIA. FOR DOORS 1 3/4" OR LESS. IDEAL FOR LATCH PROTECTORS, DOOR SAVERS, LOUVERS, ETC. AVAILABLE IN ALL FINISHES, SIZES, AND OTHER DESIGNS.

5 3/4" MULTI PURPOSE ANCHOR FR 310

FR 380

FOR STEEL AND WOOD STUD COMPLETE OPENING

~ 160 PER BOX

HEAVY DUTY ADJUSTABLE DRYWALL ANCHOR 18 GA., FITS FRAME SIZES 5 3/4" TO 8 3/4" ANCHORS STAMPED WITH FRAME SIZES FOR FAST INSTALLATION. 2 PIECES PER SET. IDEAL SOLUTION FOR ANCHORING LARGER SIZE FRAMES.

~ 200 PCS (100 SETS) PER BOX

5 3/4" MULTI-PURPOSE ADJUSTABLE ANCHOR FR 380 A

MAY BE USED AS A SINGLE 5 3/4" WOOD/METAL STUD OR COMPLETE OPENING ANCHOR. THIS ANCHOR GIVES YOU THE ADDED FLEXIBILITY TO PAIR WITH A SECOND ANCHOR FOR USE IN LARGER JAMB DEPTHS UP TO 9".

SIMPLY AMAZING! THIS ONE ANCHOR DOES IT ALL...

REDUCES YOUR INVENTORY & COVERS MOST APPLICATIONS ALL IN ONE ANCHOR.

~ 125 PER BOX

FR 380 B

LARGE ADJUSTABLE DRYWALL ANCHOR 18 GA., FITS FRAME SIZES 7" TO 12" ANCHORS STAMPED WITH FRAME SIZES FOR FAST INSTALLATION. 2 PIECES PER SET. IDEAL SOLUTION FOR ANCHORING LARGER SIZE FRAMES.

~ 200 PCS (100 SETS) PER BOX

PAGE 2

FRAME ANCHORS PART NUMBER

DESCRIPTION

ILLUSTRATION

ADJUSTABLE DRYWALL ANCHORS

FR 110

FOR 4 3/4" TO 6 3/4" FRAMES (2 PIECES PER SET) HUGE TIME COST & INVENTORY SAVER (MOST POPULAR ITEM IN THIS BOOK). THIS ANCHOR HAS LOCK IN TABS...

SIMPLY PRESS FIT AND LOCK INTO POSITION. ALSO MARKED FOR DIFFERENT FRAME PROFILES.

~ 400 PCS (200 SETS) PER BOX

SNAP-IN PREPARED OPENING ANCHOR FR 111

FOR 5 3/4" J.D. SPECIFY SIZE WHEN ORDERING.

~ 200 PER BOX

SIDELITE FLOOR ANCHOR FR 112

FITS FRAME SIZES FROM 4 3/4" TO 8 3/4" SPECIFY SIZE WHEN ORDERING.

REMOVABLE MULLION CLIP COME IN TWO PARTS (PART A AND PART B).

FR 114

A

B

5 3/4" METAL STUD ANCHOR FR 116

~ 250 PER BOX

ADJUSTABLE MULLION BASE ANCHOR

FR 640

FITS FRAMES FROM 4 3/4" TO 8 3/4" THIS ANCHOR GREATLY REDUCES YOUR INVENTORY REQUIREMENTS. YOU’LL NEVER HAVE TO WORRY ABOUT WHAT TO STOCK. YOUR SHOP PERSONNEL WILL LOVE THIS ANCHOR.

~ 200 PCS (100 SETS) OR 400 PCS (200 SETS) PER BOX

PAGE 3

FRAME ANCHORS PART NUMBER

DESCRIPTION

ILLUSTRATION

FLOOR ANCHOR — LARGE FR 140 A

18 GA.

~ 600 PER BOX

FLOOR ANCHOR — SMALL FR 140 B

18 GA.

~ 50, 100, 200 OR 400 PER BOX

HEAVY DUTY FLOOR ANCHOR FR 140 D

4", 5", 6", 7" AND 8" (wide) AVAILABLE. SPECIFY SIZE WHEN ORDERING. 4", 5" ~ 100 OR 200 PER BOX 6", 7" ~ 100 OR 150 PER BOX 8" ~ 50 OR 100 PER BOX

UNIVERSAL MASONRY “T” ANCHOR

FR 675

90° FITS UP TO 8 3/4" J.D. THIS ANCHOR HELPS REDUCE YOUR INVENTORY SUBSTANTIALLY. JAMB DEPTHS ARE PUNCHED RIGHT ON ANCHOR TO SAVE YOU TIME IN MEASURING. THIS IS THE ONLY ANCHOR WHICH YOU REALLY NEED TO CARRY IN YOUR INVENTORY.

~ 200 PER BOX

5 3/4" MASONRY “T” ANCHOR FIXED SIZE FOR 5 3/4" J.D.

FR 675 F

~ 200 PER BOX

45° OFFSET MASONRY “T” ANCHOR FITS UP TO 8 3/4" J.D. THIS ANCHOR HELPS REDUCE YOUR INVENTORY SUBSTANTIALLY. JAMB DEPTHS ARE PUNCHED RIGHT ON ANCHOR TO SAVE YOU TIME IN MEASURING.

FR 673

~ 200 PER BOX

PAGE 4

FRAME ANCHORS PART NUMBER

DESCRIPTION

ILLUSTRATION

BASE STRAP ANCHOR FR 677

18 GA.

TO BE WELDED INTO BASE OF FRAME.

USED AS BOTTOM ANCHOR FOR KNOCK-DOWN DRYWALL FRAMES. NOTE: YOU NEED TWO PER JAMB.

~ 1000 (500 SETS), 200 (100 SETS) OR 100 (50 SETS) PER BOX

SNAP-IN BASE STRAP ANCHOR FR 677 A

NO WELDING REQUIRED!

USED AS BOTTOM ANCHOR FOR KNOCK-DOWN DRYWALL FRAMES. NOTE: YOU NEED TWO PER JAMB.

~ 450 OR 125 PER BOX

FR 680

FR 682

FR 684

MULTI-PURPOSE STUD ANCHOR FOR DOUBLE EGRESS FRAMES SPECIFY JAMB DEPTH.

~ 100 PER BOX

STEEL STUD ANCHOR FOR DOUBLE EGRESS FRAMES SPECIFY JAMB DEPTH.

“T” ANCHOR FOR DOUBLE EGRESS FRAMES SPECIFY JAMB DEPTH. FOR BLOCK OR CONCRETE.

MASONRY STRAP ANCHOR MUST BE WELDED INTO FRAME.

FR 686

ADJUSTABLE FLOOR ANCHOR FR 688 A

ADJUSTABLE BOTH VERTICALLY & HORIZONTALLY. WILL FIT FRAMES UP TO 8" J.D. LARGER SIZES AVAILABLE ON REQUEST. USED FOR UNEVEN FLOOR CONDITIONS.

ADJUSTABLE FLOOR ANCHOR FR 688 F

ADJUSTABLE VERTICALLY & FIXED HORIZONTAL. FOR 5 3/4 J.D. FRAME USED FOR UNEVEN FLOOR CONDITIONS.

PAGE 5

FRAME ANCHORS PART NUMBER

DESCRIPTION

ILLUSTRATION

WIRE ANCHOR FOR MASONRY FRAMES.

FR 180

~ 400 PER BOX

MASONRY WIRE ANCHOR FOR MASONRY FRAME.

FR 180 A

~ 250 PER BOX

WIRE ANCHOR FOR MASONRY FRAMES.

FR 180 C

~ 400 PER BOX

WELD-IN STEEL STUD ANCHOR FR 290

FOR FRAMES WITH 2" FACE. AVAILABLE FOR 5 3/4", 6 3/4", 7 3/4" AND 8 3/4" FRAMES. SPECIFY SIZE WHEN ORDERING. OTHER SIZES AND PROFILES AVAILABLE.

~ 100 OR 250 PER BOX

WELD-IN STEEL STUD ANCHOR FR 290 A

FR 690

FR 691

FOR FRAMES WITH LESS THAN 2" FACE. AVAILABLE FOR 5 3/4", 6 3/4", 7 3/4" AND 8 3/4" FRAMES. SPECIFY OFFSET & SIZE WHEN ORDERING.

~ 100 OR 250 PER BOX

EXPANSION BOLT ANCHOR 1" DIA. HOLE ~ 300 PER BOX

EXPANSION BOLT ANCHOR 5/8" DIA. HOLE ~ 300 PER BOX

PAGE 6

FRAME ANCHORS PART NUMBER

DESCRIPTION

FOR THERMALLY BROKEN STEEL FRAME JOINER SEE PAGE 74.

ILLUSTRATION

WOOD STUD ANCHOR FOR 5 3/4" J.D.

FR 98

PRESSURE CLAMP ASSEMBLY FR 120

1/4" - 20 X 1" MACHINE SCREW SPECIFY WITH WELDING DIMPLES (WD) OR NO WELDING DIMPLES (ND)

~ 200 OR 500 PER BOX

CORNER BRACKET FOR FRAMES FR 121

FR 220 A

FR 220 B

FR 220 C

~ 400 OR 100 PER BOX

RUBBER BUMPER RESIDENTIAL FRAMES ~ 1000 PER BAG

RUBBER BUMPER ASA FRAMES ~ 1000 PER BAG

RUBBER BUMPER ADHESIVE BACKING

PLUG BUTTON FR 6305/8"

PLASTIC 5/8" BLACK

PLUG BUTTON FR 6303/4"

PLASTIC 3/4" BLACK

PAGE 7

HINGE REINFORCEMENTS PART NUMBER

FR 170

DESCRIPTION

ILLUSTRATION

FRAME HINGE REINFORCEMENT PLATE COVER TO BE SPOT WELDED.

FRAME HINGE REINFORCEMENT FR 230

FOR 4 1/2" HINGES, 1 5/8" X 8 3/4", 10 GA 4 WELDING DIMPLES ON EACH SIDE. SPECIFY WITH WELDING DIMPLES (WD) OR NO WELDING DIMPLES (ND)

~ 100 OR 500 PER BOX

UNIVERSAL HINGE REINFORCEMENT

FR 230 U

FOR BOTH DOORS AND FRAMES FOR 4 1/2" HINGES, 1 1/4" X 8 3/4", 10 GA 4 WELDING DIMPLES ON EACH SIDE. SPECIFY WITH WELDING DIMPLES (WD) OR NO WELDING DIMPLES (ND)

~ 100 OR 500 PER BOX

HINGE REINFORCEMENT FR 231

FR 232

FOR 6" HINGES 1 1/4" X 12", 7 GA SPECIFY WITH WELDING DIMPLES (WD) OR NO WELDING DIMPLES (ND)

HEAVY DUTY HINGE REINFORCEMENT FOR 5" HINGES 1 1/4" X 10", 7 GA SPECIFY WITH WELDING DIMPLES (WD) OR NO WELDING DIMPLES (ND)

~ 100 OR 500 PER BOX

CONVERTIBLE HINGE

FR 232 W

REINFORCEMENT FOR 5" HINGES 1 1/4" X 10", 7 GA DIMPLES MAY BE GROUND OFF OR DRILLED OUT TO CONVERT FROM STANDARD TO HEAVY WEIGHT HINGES. SPECIFY WITH WELDING DIMPLES (WD) OR NO WELDING DIMPLES (ND)

~ 100 OR 450 PER BOX

HINGE REINFORCEMENT FR 233

FR 234

FOR 5" HINGES 1 1/4" X 10", 7 GA SPECIFY WITH WELDING DIMPLES (WD) OR NO WELDING DIMPLES (ND)

~ 100 OR 500 PER BOX

FULL WIDTH FRAME HINGE REINFORCEMENT 10GA SPECIFY JAMB DEPTH AND OFFSET WHEN ORDERING.

PAGE 8

HINGE REINFORCEMENTS PART NUMBER

FR 235

DESCRIPTION

ILLUSTRATION

HEAVY WEIGHT HINGE REINFORCEMENT FOR 4 1/2" HINGES, 1 1/4" X 10", 7 GA SPECIFY WITH WELDING DIMPLES (WD) OR NO WELDING DIMPLES (ND)

~ 100 OR 500 PER BOX

HINGE REINFORCEMENT FR 235 A

FOR 4 1/2" HINGES, 1 1/4" X 10", 7 GA ALSO AVAILABLE IN 304 STAINLESS STEEL. SPECIFY WITH WELDING DIMPLES (WD) OR NO WELDING DIMPLES (ND)

~ 100 OR 500 PER BOX

CONVERTIBLE HINGE REINFORCEMENT

FR 235 W

FOR 4 1/2" HINGES, 1 1/4" X 10", 7 GA FOR BOTH DOORS AND FRAMES DIMPLES MAY BE GROUND OFF OR DRILLED OUT TO CONVERT FROM STANDARD TO HEAVY WEIGHT HINGES. SPECIFY WITH WELDING DIMPLES (WD) OR NO WELDING DIMPLES (ND)

~ 100 OR 450 PER BOX

HINGE REINFORCEMENT FR 236

FOR 3 1/2" HINGES, 7/8" X 7", 12 GA 10-24 Th’d NO WELDING DIMPLES (ND) ONLY

BLANK HINGE REINFORCEMENT 1 1/4" X 8 5/8", 10 GA

FR 237

FR 238 U

SPECIFY WITH WELDING DIMPLES (WD) OR NO WELDING DIMPLES (ND)

UNIVERSAL HEAVY DUTY HINGE REINFORCEMENT FOR BOTH DOORS AND FRAMES FOR 4 1/2" HINGES, 1 1/4" X 8 5/8", 10 GA 4 WELDING DIMPLES ON EACH SIDE. SPECIFY WITH WELDING DIMPLES (WD) OR NO WELDING DIMPLES (ND)

HINGE REINFORCEMENT FOR 4" HINGES, 1 1/4" X 8 5/8", 12 GA

FR 239

SPECIFY WITH WELDING DIMPLES (WD) OR NO WELDING DIMPLES (ND)

~ 100 OR 500 PER BOX

DUST MORTAR BOX FR 240

FOR 4 1/2" HINGE REINFORCEMENTS

~ 100, 300 OR 800 PER BOX

PAGE 9

HINGE REINFORCEMENTS PART NUMBER

DESCRIPTION

ILLUSTRATION

STANLEY HINGE REINFORCEMENT FR 241

FOR 4" HINGES, 1 1/4" X 8 3/4", 12 GA SPECIFY WITH WELDING DIMPLES (WD) OR NO WELDING DIMPLES (ND)

~ 100 OR 500 PER BOX

HINGE REINFORCEMENT FR 242

FOR 3" HINGES, 1 1/4" X 8 5/8", 12 GA SPECIFY WITH WELDING DIMPLES (WD) OR NO WELDING DIMPLES (ND)

~ 100 OR 300 PER BOX

REVERSIBLE HINGE REINFORCEMENT

DR 110

FOR BOTH DOORS AND FRAMES FOR 4 1/2" HINGES, 1 1/4" X 8 1/8", 10 GA SPECIFY WITH WELDING DIMPLES (WD) OR NO WELDING DIMPLES (ND)

~ 100 OR 800 PER BOX

HINGE REINFORCEMENT FOR ALUMINUM DOORS (ZINC PLATED) DR 222

FOR 4 1/2" HINGES, 1 1/4" X 8", 7 GA

~ 100 OR 700 PER BOX

CONVERTIBLE HI-FREQUENCY HINGE REINFORCEMENT DR 370 B

FOR BOTH DOORS AND FRAMES. FOR 4 1/2" HINGES, 1 1/4" X 8 3/4", 10 GA DIMPLES MAY BE GROUND OFF OR DRILLED OUT TO CONVERT FROM STANDARD TO HEAVY WEIGHT HINGES. SPECIFY WITH WELDING DIMPLES (WD) OR NO WELDING DIMPLES (ND)

~ 100 OR 450 PER BOX

ELECTRICAL HINGE REINFORCEMENT WITH THREE 3/4" DIA. HOLES

DR EHP

FOR BOTH DOORS AND FRAMES. FOR 4 1/2" HINGES, 1 1/4" X 10", 7 GA OTHER GA, SIZES & OFFSETS AVAILABLE, SPECIFY WITH WELDING DIMPLES (WD) OR NO WELDING DIMPLES (ND)

~ 100 OR 500 PER BOX

PAGE 10

REINFORCEMENTS PART NUMBER

DESCRIPTION

ILLUSTRATION

CORNER BRACKET FOR FRAMES FR 121

~ 400 OR 100 PER BOX

ESCUTCHEON SET TO COVER 2 1/8" HOLE UNDER RIM PANIC DEVICE

FR 122

~ 25, 50 OR 100 PER BOX

WELD-IN CORNER TAB FR 131

5/8" X 7/16" (lip) X 1 13/16" (wide) FOR STANDARD 2" FACE FRAMES.

~ 50, 100 OR 200 PER BOX

WELD-IN CORNER TAB FR 132

5/8" X 7/16" (lip) X 3 13/16" (wide) FOR 4" PROFILE FRAMES.

~ 50, 100 OR 200 PER BOX

continued

<<<

GBB SERIES HINGES ARCHITECTURAL AND COMMERCIAL GRADE AVAILABLE IN A VARIETY OF SIZES AND FINISHES

PAGE 11

REINFORCEMENTS PART NUMBER

FR 161

FR 181

DESCRIPTION FLUSH BOLT STRIKE REINFORCEMENT

ILLUSTRATION FR160 (SEE PAGE 41)

WORKS IN CONJUNCTION WITH FR160 (SEE PAGE 41) 2 HOLES - 8-32 Thâ&#x20AC;&#x2122;d

~ 50, 100 OR 200 PER BOX

CASED OPEN SPAT REINFORCES BOTTOM OF FRAME STAINLESS STEEL, ALSO AVAILABLE IN OTHER FINISHES. SPAT SHOWN WITH 1/2" RETURNS. SPECIFY JAMB DEPTH, HEIGHT, FINISH, WITH OR WITHOUT RETURNS WHEN ORDERING. (SHOWN WITH RETURNS)

FRAME SPAT FR 182

FR 270 A

REINFORCES BOTTOM OF FRAME STAINLESS STEEL, ALSO AVAILABLE IN OTHER FINISHES. SPECIFY JAMB DEPTH, HEIGHT, FINISH, WITH OR WITHOUT RETURNS WHEN ORDERING.

CLOSER REINFORCEMENT STRIP TYPE (12" X 1 3/4" X 16GA) OTHER SIZES ALSO AVAILABLE, CONTACT US FOR DETAILS.

~ 100 OR 500 PER BOX

FR 27O B

CLOSER REINFORCEMENT HEAVY DUTY STRIP TYPE (12" X 1 3/4" X 1/8") OTHER SIZES ALSO AVAILABLE, CONTACT US FOR DETAILS.

~ 100 OR 500 PER BOX

FR 27O C

CLOSER REINFORCEMENT HEAVY DUTY STRIP TYPE (14" X 1 3/4" X 1/8") OTHER SIZES ALSO AVAILABLE, CONTACT US FOR DETAILS.

~ 100 OR 500 PER BOX

FR 27O N

CLOSER REINFORCEMENT HEAVY DUTY STRIP TYPE (14" X 1 1/2" X 10GA) OTHER SIZES ALSO AVAILABLE, CONTACT US FOR DETAILS.

~ 100 OR 750 PER BOX

CLOSER REINFORCEMENT FULL PROFILE, 14" LONG FR 272

VIRTUALLY ALL JAMB DEPTHS AND LENGTHS AVAILABLE, SPECIFY WHEN ORDERING.

~ 40 PER BOX

CLOSER REINFORCEMENT HALF PROFILE, 14" LONG FR 273

VIRTUALLY ALL SIZES AVAILABLE. SPECIFY RABBET AND SOFFIT WIDTH AND LENGTH REQUIREMENTS. CONTACT US FOR DETAILS AND PRICING.

~ 50 PER BOX

FR 590

REINFORCING CLIP HIGH FREQUENCY CLIP

PAGE 12

REINFORCEMENTS PART NUMBER

DESCRIPTION

ILLUSTRATION

MOUNTING CLIP FR 620

FR 621

FOR TRANSOM PANEL

~ 50 OR 100 PER BOX

DEAD LOCK STRIKE REINFORCING PLATE SPECIFY WITH WELDING DIMPLES (WD) OR NO WELDING DIMPLES (ND)

~ 50, 100 OR 200 PER BOX

ASA STRIKE REINFORCING PLATE FR 623

SPECIFY WITH WELDING DIMPLES (WD) OR NO WELDING DIMPLES (ND)

~ 50, 100 OR 200 PER BOX

DOOR JAMB REINFORCEMENT FR 692

MAY BE USED TO REPAIR DAMAGED FRAMES DUE TO VANDALISM OR FATIGUE. THIS UNIT CAN ALSO BE USED AS AN ADDED REINFORCEMENT TO A WOOD FRAME. STANDARD LENGTHS: 24", 36" AND 72". AVAILABLE IN STEEL, STAINLESS STEEL, BRASS AND BRONZE.

MORTISE LOCK CENTERING CLIP DR 115

~ 50, 100 OR 400 PER BOX

FLUSH BOLT REINFORCEMENT DR 120

2 HOLES - 8-32 Th’d SPECIFY WITH WELDING DIMPLES (WD) OR NO WELDING DIMPLES (ND)

~ 50, 100 OR 400 PER BOX

DEADBOLT REINFORCEMENT DR 130

1 HOLE - 8-32 Th’d 7/8" (wide) X 2 17/32" (length) SPECIFY WITH WELDING DIMPLES (WD) OR NO WELDING DIMPLES (ND)

~ 50, 100 OR 400 PER BOX

DEADBOLT REINFORCEMENT DR 130A

1 HOLE - 8-32 Th’d 7/8" (wide) X 1 3/4" (length) WITH NOTCH FOR CENTER SEAM DOOR SPECIFY WITH WELDING DIMPLES (WD) OR NO WELDING DIMPLES (ND)

~ 50, 100 OR 400 PER BOX

PAGE 13

REINFORCEMENTS PART NUMBER

DESCRIPTION

ILLUSTRATION

ASA STRIKE REINFORCEMENT DR 130 C

1 HOLE - 12-24 Th’d 7/8" (w) X 2 17/32" (l) SPECIFY WITH WELDING DIMPLES (WD) OR NO WELDING DIMPLES (ND)

~ 50, 100, 200 OR 400 PER BOX

DEADBOLT REINFORCEMENT DR 130 D

1 HOLE - 8-32 Th’d 1 1/4" (w) X 3 1/4" (l) SPECIFY WITH WELDING DIMPLES (WD) OR NO WELDING DIMPLES (ND)

~ 50, 100, 200 OR 400 PER BOX

ASA STRIKE REINFORCEMENT DR 130 E

1 HOLE - 12-24 Th’d 1 1/4" (w) X 3 1/4" (l) SPECIFY WITH WELDING DIMPLES (WD) OR NO WELDING DIMPLES (ND)

~ 50, 100, 200 OR 400 PER BOX

DEADBOLT REINFORCEMENT FLAT FR 130 PW

1 HOLE - 8-32 Th’d 1 1/4" (w) X 3 1/4" (l) SPECIFY WITH WELDING DIMPLES (WD) OR NO WELDING DIMPLES (ND)

~ 50, 100, 200 OR 400 PER BOX

ASA STRIKE REINFORCEMENT FLAT FR 130 C PW

1 HOLE - 12-24 Th’d 1 1/4" (w) X 3 1/4" (l) SPECIFY WITH WELDING DIMPLES (WD) OR NO WELDING DIMPLES (ND)

~ 50, 100, 200 OR 400 PER BOX

MORTISE LOCK REINFORCEMENT DR 140

1 HOLE - 12-24 Th’d SPECIFY WITH WELDING DIMPLES (WD) OR NO WELDING DIMPLES (ND)

~ 50, 100, 200 OR 400 PER BOX

MORTISE LOCK REINFORCEMENT DR 140 A

1 HOLE - 12-24 Th’d WITH NOTCH FOR CENTER SEAM DOOR, HOLES FOR RIVETTING. SPECIFY WITH WELDING DIMPLES (WD) OR NO WELDING DIMPLES (ND)

~ 50, 100, 200 OR 400 PER BOX

POWER TRANSFER REINFORCEMENT DR 142

3 HOLES - 10-24 OR 10-32 Th’d 1 1/4" (w) X 2 1/2" (l), 14 GA WITH 1/8 OFFSET OTHER OFFSET AVAILABLE, SPECIFY WHEN ORDERING. SPECIFY THREAD WHEN ORDERING.

~ 50, 100, 200 OR 400 PER BOX

PAGE 14

REINFORCEMENTS PART NUMBER

DESCRIPTION

ILLUSTRATION

ESCUTCHEON SET DR 150

TO COVER 2 1/8" 161 HOLE

ESCUTCHEON SET DR 152

TO COVER 1 1/2" DEADBOLT HOLE

LOCK PUNCHOUT

(FOR 161 LOCK)

2 1/8" DIA.

DR 160

DEADBOLT PUNCHOUT DR 161

(FOR DEADBOLT)

1 1/2" DIA.

DEADBOLT PUNCHOUT

(FOR DEADBOLT)

2 1/8" DIA.

DR 161 A

CONVERSION FILLER PLATE CONVERTS 86 EDGE TO 161 LATCH EDGE

DR 180

~ 10, 25, 50 OR 100 PER BOX

CONVERSION FILLER PLATE CONVERTS 86 EDGE TO ASA STRIKE REINFORCEMENT

DR 190

~ 10, 25, 100 OR 150 PER BOX

PAGE 15

REINFORCEMENTS PART NUMBER

DESCRIPTION

ILLUSTRATION

FLUSH BOLT DOOR GUIDE DR 200

~ 50, 100 OR 400 PER BOX

FLUSH BOLT DOOR GUIDE DR 201

(REVERSIBLE) 4 HOLES - 8-32 Th’d

~ 100, 300 OR 400 PER BOX

LH/RH FLUSH BOLT DOOR GUIDE DR 201 H

(HANDED) 4 HOLES - 8-32 Th’d FORMERLY BT48 SPECIFY HANDING WHEN ORDERING.

LH

~ 100 OR 200 PER BOX

RH

CYLINDRICAL LOCK REINFORCING UNIT COMES WITH BARREL SUPPORT, LOCK AND REINFORCEMENT. YOU CAN ORDER THEM SEPARATELY. SPECIFY PARTS WHEN ORDERING.

DR 210

~ LOCK ONLY: 50, 100, 300 OR 800 PER BOX ~ BARREL SUPPORT ONLY: 150 OR 1000 PER BOX

BARREL SUPPORT ONLY LOCK ONLY

REINFORCEMENT

MORTISE LOCK FILLER PLATE DR 350

DR 320

86 EDGE FILLER 1 1/4" X 8"

~ 50 OR 100 PER BOX

TOP & BOTTOM CHANNEL / U CHANNEL 3/4" X 1 3/4" FOR REINFORCING STEEL DOORS. SOLD 10' LENGTHS AND CUT-TO-SIZE. FOR OEM ACCOUNTS: AVAILABLE WITH WELDING DIMPLES. SPECIFY WHEN ORDERING.

~ 10 PER BUNDLE

SUPPORT CLIP FOR VISION LITE GLASS KITS.

DR 346

REINFORCES CUT OUT IN DOOR WHEN INSTALLING LITE KITS.

PAGE 16

GLAZING BEAD PART NUMBER

FR 320

DESCRIPTION

ILLUSTRATION

GLAZING BEAD WITH HOLES 10' X 5/8" X 1/2" WITH HOLES AT 7" CENTERS

~ 100 PER BUNDLE

FR 320 A

FR 320 B

GLAZING BEAD WITHOUT HOLES 10' X 5/8" X 1/2"

~ 100 PER BUNDLE

GLAZING BEAD WITH HOLES 10' X 5/8" X 5/8" WITH HOLES AT 7" CENTERS

~ 100 PER BUNDLE

FR 320 C

GLAZING BEAD WITHOUT HOLES 10' X 5/8" X 5/8"

~ 100 PER BUNDLE

GLAZING BEAD FR

10' X 3/4" X 3/4" WITH HOLES AT 7" CENTERS OR WITHOUT HOLES SPECIFY WHEN ORDERING.

320 D

FR 320 E

GLAZING BEAD 8' X 5/8" X 1" WITH HOLES AT 7" CENTERS OR WITHOUT HOLES SPECIFY WHEN ORDERING.

WE ALSO MANUFACTURE GLAZING BEAD 5/8" X 3/8" WITH OR WITHOUT HOLES

FR320G CUSTOM GLAZING BEAD WE MANUFACTURE OTHER TYPES AND PROFILES OF GLAZING BEAD IN STEEL, STAINLESS STEEL, BRASS, AND BRONZE. CONTACT US FOR DETAILS.

PAGE 17

SCREWS PART NUMBER

DESCRIPTION

ILLUSTRATION

#6 TEK SCREWS DR 170

1" LONG PHILLIPS, OVAL HEAD SELF-DRILLING, SELF-TAPPING.

~ 1000 PER BAG, 5000 OR 10,000 PER BOX

#8 TEK SCREWS DR 170 A

1 1/4" LONG PHILLIPS, OVAL HEAD SELF-DRILLING, SELF-TAPPING.

~ 1000 PER BAG OR 5000 PER BOX

#6 TEK SCREWS DR 170 B

1/2" LONG PHILLIPS, OVAL HEAD SELF-DRILLING, SELF-TAPPING. IDEAL FOR WEATHERSTRIPPING, KICKPLATES, OR OTHER FLAT GOODS.

~ 1000 PER BAG OR 15,000 PER BOX

8/32 MACHINE SCREWS DR 171

8-32 Th’d PHILLIPS, UNDERCUT - FLAT HEAD AVAILABLE IN A VARIETY OF FINISHES.

~ 100, 1000 PER BAG OR 10,000 PER BOX

12/24 MACHINE SCREWS DR 172

12-24 Th’d PHILLIPS, UNDERCUT - FLAT HEAD AVAILABLE IN A VARIETY OF FINISHES.

~ 100, 1000 PER BAG OR 8000 PER BOX

12/24 TEK SCREWS DR 172 T

12-24 Th’d PHILLIPS, UNDERCUT - FLAT HEAD SELF-DRILLING, SELF-TAPPING.

~ 100, 1000 PER BAG OR 8000 PER BOX

COMBINATION SCREWS DR 173

12-24 Th’d FOR WOOD AND STEEL APPLICATION

~ 100, 1000 PER BAG

MACHINE SCREWS DR 174

1/4 Th’d X 2" LONG FLAT HEAD

~ 100, 1000 PER BAG

FOR OTHER SIZES, AND PROFILES OF SCREWS; PLEASE CONTACT US.

PAGE 18

SCREWS PART NUMBER

DESCRIPTION

ILLUSTRATION

KICKPLATE SCREWS

DR 175

PHILLIPS, OVAL HEAD IDEAL FOR KICKPLATES, DOOR SAVERS, FLAT GOODS, CORNER GUARDS, ETC. AVAILABLE IN ALL FINISHES INCLUDING SOLID STAINLESS STEEL (304).

~ 100, 1000 PER BAG

12-24 MACHINE SECURITY SCREWS

DS 176

1" LONG OTHER SIZES AND COMBINATIONS AVAILABLE

~ 100, 1000 PER BAG

#14 WOOD SECURITY SCREWS

DS 177

1" LONG OTHER SIZES AND COMBINATIONS AVAILABLE

~ 100, 1000 PER BAG

8-32 MACHINE SECURITY SCREWS

DS 178

1" LONG OTHER SIZES AND COMBINATIONS AVAILABLE

~ 100, 1000 PER BAG

#10 WOOD SECURITY SCREWS

DS 179

1" LONG OTHER SIZES AND COMBINATIONS AVAILABLE

~ 100, 1000 PER BAG

PLEASE CONTACT US FOR OTHER SIZES, AND PROFILES OF SCREWS.

NOTES

PAGE 19

LITE KITS PART NUMBER

DESCRIPTION

ILLUSTRATION

SNAP-IN LITE KIT FIRE RATED STEEL GLAZING TRIM WITH SNAP-IN STOP

“THE ONE AND ONLY”

DR 340

THIS FAMOUS LITE KIT HAS REVOLUTIONIZED THE INDUSTRY. IT ELIMINATES ALL OF YOUR “LITE-KIT HEADACHES,” SAVES ON INSTALLATION TIME, SAVES MONEY AND REDUCES INVENTORY.

10' LENGTHS AVAILABLE IN: ~ 20 OR 50 PER BUNDLE (TRIM & STOP) ALSO AVAILABLE IN RANDOM LENGTHS GREAT SAVINGS! CONTACT FACTORY FOR AVAILABILITY

SNAP-IN LITE KIT - COMPLETE SET DR 340 KIT FORM

PRE-CUT, PRE-NOTCHED, AND READY TO INSTALL. NO SCREWS AND REINFORCING CHANNEL REQUIRED. INSTALLS FASTER THAN ANY OTHER LITE KIT ON THE MARKET TODAY. SPECIFY H & V WHEN ORDERING.

SEE PAGE 22 AND 23 FOR DETAILS

STEEL GLAZING TRIM DR 310

FIRE RATED, AVAILABLE IN 10' LENGTHS AND COMPLETE LITE KIT SET. FOR USE ON WOOD AND STEEL DOORS. ALSO AVAILABLE IN BRASS, BRONZE AND STAINLESS STEEL. TRIM TO BE USED IN CONJUNCTION WITH FR320 GLASS STOP.

~ 10 PER BUNDLE (TRIM ONLY)

THERMAL LITE KIT DR 300

STEEL GLAZING TRIM, AVAILABLE IN 10' LENGTHS. FOR DOUBLE GLAZING APPLICATIONS, DESIGNED TO ACCEPT UP TO 1" THICK GLASS. TRIM TO BE USED IN CONJUNCTION WITH FR320 GLASS STOP. ALSO AVAILABLE IN PRE-CUT KIT FORM. AVAILABLE IN STEEL, STAINLESS STEEL, BRASS & BRONZE.

~ 10 PER BUNDLE (TRIM ONLY)

VISION LITE FIRE RATED SANDWICH-TYPE LITE KIT SLIM & ELEGANT DESIGN QUICK AND EASY TO INSTALL ALWAYS STOCK - READY TO SHIP AVAILABLE IN A HUGE VARIETY OF SIZES.

DR 345

IDEAL FOR ALL DOOR TYPES (WOOD, STEEL, COMPOSITE, KALAMEIN...)

NOW AVAILABLE IN: - POWDER COATED GREY OR BRONZE - STAINLESS STEEL - CHROME - BRASS - BRONZE

SEE PAGE 24 FOR DETAILS

PAGE 20

LITE KITS & ACCESSORIES PART NUMBER

DESCRIPTION

ILLUSTRATION

ROUND VISION LITE KITS AVAILABLE IN 12", 18" and 24"

DR 347

GLASS 1/4" THICK WIRE GLASS FOR FIRE AND NON-FIRE RATED LITE KITS. VARIETY OF SIZES AVAILABLE.

DR 312

ALSO AVAILABLE (CUT TO SIZE): - CLEAR TEMPERED GLASS - IMPACT SAFETY-RATED WIRE GLASS - CERAMIC GLASS - FIRE RATED WIRE GLASS

TEMPLATES FOR LITE KITS DR 313

MARK THE DOOR IN SECONDS - ACCURATELY, AND PRECISELY. YOU WOULD BE SURPRISED HOW MUCH TIME IT REALLY TAKES YOUR SHOP PERSON TO MARK THE DOOR FOR A LITE KIT CUT- OUT. THIS OPERATION IS GROSSLY UNDER ESTIMATED BY MANY. WITH THIS STEEL TEMPLATE, YOU WILL BE ASTONISHED HOW MUCH TIME AND MONEY YOU WILL SAVE. ANOTHER GREAT WAY TO IMPROVE YOUR EFFICIENCY!

NOTES

PAGE 21

THE AMAZING SNAP-IN BENEFITS OF THE SNAP-IN VISION LITE: • FIRE RATED BY UL AND WARNOCK HERSEY • NO REINFORCING CHANNEL REQUIRED...

EVEN FOR FULL GLASS! • AVAILABLE PRE-CUT, PRE-NOTCHED READY TO INSTALL HORIZONTAL TRIM Glass Opening WIDTH

5 6 7 8 9 11 13 15 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35

"

( 127 )

"

( 152 )

"

( 178 )

"

( 203 )

3/4" ( 248 ) "

( 279 )

"

( 330 )

"

( 381 )

"

( 432 )

"

( 457 )

"

( 483 )

"

( 508 )

"

( 533 )

"

( 559 )

"

( 584 )

"

( 610 )

"

( 635 )

"

( 660 )

"

( 686 )

"

( 711 )

"

( 737 )

"

( 762 )

"

( 787 )

"

( 813 )

"

( 838 )

"

( 864 )

"

( 889 )

Actual Glass WIDTH

6 7 8 9 10 12 14 16 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36

"

( 152 )

"

( 178 )

"

( 203 )

"

( 229 )

3/4" ( 273 ) "

( 305 )

"

( 356 )

"

( 406 )

"

( 457 )

"

( 483 )

"

( 508 )

"

( 533 )

"

( 559 )

"

( 584 )

"

( 610 )

"

( 635 )

"

( 660 )

"

( 686 )

"

( 711 )

"

( 737 )

"

( 762 )

"

( 787 )

"

( 813 )

"

( 838 )

"

( 864 )

"

( 889 )

"

( 914 )

Actual Cut-Out In Door Skin WIDTH

Part No. DR340 DR340 DR340 DR340 DR340 DR340 DR340 DR340 DR340 DR340 DR340 DR340 DR340 DR340 DR340 DR340 DR340 DR340 DR340 DR340 DR340 DR340 DR340 DR340 DR340 DR340 DR340 -

5 6 8 9 10 12 14 16 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36

H H H H H H H H H H H H H H H H H H H H H H H H H H H

6 7 8 9 11 12 14 16 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36

3/8" ( 162 ) 3/8" ( 187 ) 3/8" ( 213 ) 3/8" ( 238 ) 1/8" ( 283 ) 3/8" ( 314 ) 3/8" ( 365 ) 3/8" ( 416 ) 3/8" ( 467 ) 3/8" ( 492 ) 3/8" ( 517 ) 3/8" ( 543 ) 3/8" ( 568 ) 3/8" ( 594 ) 3/8" ( 619 ) 3/8" ( 644 ) 3/8" ( 670 ) 3/8" ( 695 ) 3/8" ( 721 ) 3/8" ( 746 ) 3/8" ( 771 ) 3/8" ( 797 ) 3/8" ( 822 ) 3/8" ( 848 ) 3/8" ( 873 ) 3/8" ( 898 ) 3/8" ( 924 )

Trim Length 6 7 8 9 11 12 14 16 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36

1/4" ( 159 ) 1/4" ( 184 ) 1/4" ( 210 ) 1/4" ( 235 ) "

( 279 )

1/4" ( 311 ) 1/4" ( 362 ) 1/4" ( 413 ) 1/4" ( 464 ) 1/4" ( 489 ) 1/4" ( 514 ) 1/4" ( 540 ) 1/4" ( 565 ) 1/4" ( 591 ) 1/4" ( 616 ) 1/4" ( 641 ) 1/4" ( 667 ) 1/4" ( 692 ) 1/4" ( 718 ) 1/4" ( 743 ) 1/4" ( 768 ) 1/4" ( 794 ) 1/4" ( 819 ) 1/4" ( 845 ) 1/4" ( 870 ) 1/4" ( 895 ) 1/4" ( 921 )

Stop Length 5 6 7 8 9 11 13 15 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35

"

( 127 )

"

( 152 )

"

( 178 )

"

( 203 )

3/4" ( 248 ) "

( 279 )

"

( 330 )

"

( 381 )

"

( 432 )

"

( 457 )

"

( 483 )

"

( 508 )

"

( 533 )

"

( 559 )

"

( 584 )

"

( 610 )

"

( 635 )

"

( 660 )

"

( 686 )

"

( 711 )

"

( 737 )

"

( 762 )

"

( 787 )

"

( 813 )

"

( 838 )

"

( 864 )

"

( 889 )

Box QTY

50 50 50 50 50 50 30 30 30 30 30 30 30 30 30 30 25 25 25 25 25 25 25 20 20 20 20

Dimensions shown in ( ) are in mm

PAGE 22

VISION LITE IN KD FORM

• CUSTOM SIZES AVAILABLE • KD INSTALLATION... NO SCREWS OR WELDING NEEDED! • 10’ LENGTHS AVAILABLE... MAKE YOUR OWN CUSTOM SIZES

THE LEAST EXPENSIVE VISION LITE! VERTICAL TRIM

9 10 15 17 18 23 24 25 28 29 30 31 32 33 34 35 36 37 47 53 63 65 67 69 79

3/4" ( 248 ) 3/4" ( 273 ) "

( 381 )

"

( 432 )

3/4" ( 476 ) "

( 584 )

"

( 610 )

"

( 635 )

"

( 711 )

"

( 737 )

"

( 762 )

"

( 787 )

"

( 813 )

"

( 838 )

"

( 864 )

"

( 889 )

"

( 914 )

"

( 940 )

"

( 1194 )

"

( 1346 )

1/2" ( 1613 ) 1/2" ( 1664 ) 1/2" ( 1715 ) 1/2" ( 1765 ) 1/2" ( 2019 )

Actual Glass HEIGHT

10 11 16 18 19 24 25 26 29 30 31 32 33 34 35 36 37 38 48 54 64 66 68 70 80

3/4" ( 273 ) 3/4" ( 298 ) "

( 406 )

"

( 457 )

3/4" ( 502 ) "

( 610 )

"

( 635 )

"

( 660 )

"

( 736 )

"

( 762 )

"

( 787 )

"

( 813 )

"

( 838 )

"

( 864 )

"

( 889 )

"

( 914 )

"

( 940 )

"

( 965 )

"

( 1219 )

"

( 1372 )

1/2" ( 1638 ) 1/2" ( 1689 ) 1/2" ( 1740 ) 1/2" ( 1791 ) 1/2" ( 2045 )

Actual Cut-Out In Door Skin HEIGHT

Part No. DR340 DR340 DR340 DR340 DR340 DR340 DR340 DR340 DR340 DR340 DR340 DR340 DR340 DR340 DR340 DR340 DR340 DR340 DR340 DR340 DR340 DR340 DR340 DR340 DR340 -

10 12 16 18 20 24 25 26 29 30 31 32 33 34 35 36 37 38 48 54 64 66 68 70 80

V V V V V V V V V V V V V V V V V V V V V V V V V

11 12 16 18 20 24 25 26 29 30 31 32 33 34 35 36 37 38 48 54 64 66 68 70 80

1/8" ( 283 ) 1/8" ( 308 ) 3/8" ( 416 ) 3/8" ( 467 ) 1/8" ( 511 ) 3/8" ( 619 ) 3/8" ( 644 ) 3/8" ( 670 ) 3/8" ( 746 ) 3/8" ( 771 ) 3/8" ( 797 ) 3/8" ( 822 ) 3/8" ( 848 ) 3/8" ( 873 ) 3/8" ( 898 ) 3/8" ( 924 ) 3/8" ( 949 ) 3/8" ( 975 ) 3/8" ( 1229 ) 3/8" ( 1381 ) 7/8" ( 1648 ) 7/8" ( 1699 ) 7/8" ( 1749 ) 7/8" ( 1800 ) 7/8" ( 2054 )

Dimensions shown in ( ) are in mm

Trim Length 12 13 17 19 21 25 26 27 30 31 32 33 34 35 36 37 38 39 49 55 65 67 69 71 81

"

( 305 )

"

( 330 )

1/4" ( 438 ) 1/4" ( 489 ) "

( 533 )

1/4" ( 641 ) 1/4" ( 667 ) 1/4" ( 692 ) 1/4" ( 768 ) 1/4" ( 794 ) 1/4" ( 819 ) 1/4" ( 845 ) 1/4" ( 870 ) 1/4" ( 895 ) 1/4" ( 921 ) 1/4" ( 946 ) 1/4" ( 971 ) 1/4" ( 997 ) 1/4" ( 1251 ) 1/4" ( 1403 ) 3/4" ( 1670 ) 3/4" ( 1721 ) 3/4" ( 1772 ) 3/4" ( 1822 ) 3/4" ( 2076 )

Stop Length 11 12 16 18 20 24 25 26 29 30 31 32 33 34 35 36 37 38 48 54 65 67 69 71 81

1/4" ( 286 ) 1/4" ( 311 ) 1/2" ( 419 ) 1/2" ( 470 ) 1/4" ( 514 ) 1/2" ( 622 ) 1/2" ( 648 ) 1/2" ( 673 ) 1/2" ( 749 ) 1/2" ( 775 ) 1/2" ( 800 ) 1/2" ( 826 ) 1/2" ( 851 ) 1/2" ( 878 ) 1/2" ( 901 ) 1/2" ( 927 ) 1/2" ( 953 ) 1/2" ( 978 ) 1/2" ( 1232 ) 1/2" ( 1384 ) "

( 1651 )

"

( 1702 )

"

( 1753 )

"

( 1803 )

"

( 2057 )

Box QTY

50 50 30 30 30 30 25 25 25 25 25 25 20 20 20 20 20 10 or 20 pcs Per Bundle

Glass Opening HEIGHT

Snap-In Lite Kit Information Rev.: June-2011

PAGE 23

Â&#x2019; CONSULT FACTORY FOR ADDITIONAL SIZES

SIZING CHART FOR DR345 VISION LITES ORDER SIZE

EXPOSED GLASS SIZE

ACTUAL GLASS SIZE

DR345 DR345 DR345 DR345 DR345 DR345 DR345 DR345 DR345 DR345 DR345 DR345 DR345 DR345 DR345 DR345 DR345 DR345 DR345 DR345 DR345 DR345 DR345 DR345 DR345 DR345 DR345 DR345 DR345 DR345 DR345 DR345 DR345 DR345 DR345 DR345 DR345 DR345 DR345 DR345 DR345 DR345 DR345 DR345 -

3 4 4 4 4 4 4 4 4 5 6 6 6 6 6 7 7 8 8 8 8 10 10 12 13 14 14 14 14 14 14 16 16 16 16 16 18 18 18 18 18 18 18 18

4 5 5 5 5 5 5 5 5 6 7 7 7 7 7 8 8 9 9 9 9 11 11 13 14 15 15 15 15 15 15 17 17 17 17 17 19 19 19 19 19 19 19 19

5 6 6 6 6 6 6 6 6 7 8 8 8 8 8 9 9 10 10 10 10 12 12 14 15 16 16 16 16 16 16 18 18 18 18 18 20 20 20 20 20 20 20 20

x 35 x8 x 16 x 27 x 28 x 30 x 34 x 36 x 48 x 22 x 18 x 30 x 32 x 36 x 38 x 50 x 62 x 10 x 20 x 46 x 58 x 12 x 50 x 66 x 30 x 16 x 22 x 28 x 30 x 54 x 58 x 18 x 24 x 32 x 34 x 66 x 20 x 22 x 24 x 26 x 30 x 32 x 62 x 66

" " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " "

x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x

33 6 14 25 26 28 32 34 46 20 16 28 30 34 36 48 60 8 18 44 56 10 48 64 28 14 20 26 28 52 56 16 22 30 32 64 18 20 22 24 28 30 60 64

" " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " "

" " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " "

x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x

34 7 15 26 27 29 33 35 47 21 17 29 31 35 37 49 61 9 19 45 57 11 49 65 29 15 21 27 29 53 57 17 23 31 33 65 19 21 23 25 29 31 61 65

" " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " "

ORDER SIZE

EXPOSED GLASS SIZE

ACTUAL GLASS SIZE

DR345 DR345 DR345 DR345 DR345 DR345 DR345 DR345 DR345 DR345 DR345 DR345 DR345 DR345 DR345 DR345 DR345 DR345 DR345 DR345 DR345 DR345 DR345 DR345 DR345 DR345 DR345 DR345 DR345 DR345 DR345 DR345 DR345 DR345 DR345 DR345 DR345 -

20 20 20 20 20 20 20 20 22 22 22 22 22 22 22 22 22 22 22 22 24 24 24 24 24 24 24 24 24 24 24 24 26 28 30 30 30

21 21 21 21 21 21 21 21 23 23 23 23 23 23 23 23 23 23 23 23 25 25 25 25 25 25 25 25 25 25 25 25 27 29 31 31 31

22 22 22 22 22 22 22 22 24 24 24 24 24 24 24 24 24 24 24 24 26 26 26 26 26 26 26 26 26 26 26 26 28 30 32 32 32

x 28 x 30 x 32 x 34 x 60 x 62 x 64 x 66 x 24 x 28 x 30 x 32 x 34 x 36 x 38 x 54 x 56 x 60 x 64 x 66 x 26 x 32 x 34 x 38 x 44 x 56 x 58 x 60 x 62 x 64 x 66 x 70 x 34 x 34 x 58 x 62 x 64

" " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " "

x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x

26 28 30 32 58 60 62 64 22 26 28 30 32 34 36 52 54 58 62 64 24 30 32 36 42 54 56 58 60 62 64 68 32 32 56 60 62

" " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " "

" " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " "

x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x

27 29 31 33 59 61 63 65 23 27 29 31 33 35 37 53 55 59 63 65 25 31 33 37 43 55 57 59 61 63 65 69 33 33 57 61 63

" " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " "

Vision Lite Kit Information Rev.: June-2011

" " " " "

PAGE 24

TEMPLATES PART NUMBER

DESCRIPTION

ILLUSTRATION

161 DOOR TEMPLATE

2 1/8" BORE

MAKE A FAST AND ACCURATE 2 1/8" BORE AND DOOR LATCH PREP WITH THIS TEMPLATE.

FR 2000

TAKES SECONDS TO MARK THE DOOR!

DEADBOLT DOOR TEMPLATE 1 1/2" BORE

FR 2001

MAKE A FAST AND ACCURATE 1 1/2" BORE AND DOOR LATCH PREP WITH THIS TEMPLATE.

WITH OUR TEMPLATES THERE IS NO WASTED TIME...

NO SCRAPPED DOORS... NO WRONG PREPS...

ASA DOOR TEMPLATE MAKE A FAST AND ACCURATE 4 7/8" ASA CUT-OUT ON A DOOR WITH THIS TEMPLATE.

FR 2002

FLUSH BOLT DOOR TEMPLATE MAKE A FAST AND ACCURATE 1" X 6 3/4" FLUSH BOLT CUT-OUT ON AN INACTIVE DOOR WITH THIS TEMPLATE.

FR 2003

86 EDGE DOOR TEMPLATE MAKE A FAST AND ACCURATE 8" MORTISE LOCK CUT-OUT ON A DOOR WITH THIS TEMPLATE.

FR 2004

TEMPLATES FOR 3 1/2", 4 1/2" AND 5" HINGE CUT-OUTS, AS WELL AS TEMPLATES FOR PANIC DEVICES AND LOCK CUT-OUTS ARE AVAILABLE. CONTACT US FOR FURTHER INFORMATION.

PAGE 25

TEMPLATES PART NUMBER

DESCRIPTION

ILLUSTRATION

HINGE DOOR TEMPLATE MAKE FAST AND ACCURATE HINGE CUT-OUTS ON A DOOR WITH THIS TEMPLATE.

FR 2005

ASA FRAME TEMPLATE MAKE FAST AND ACCURATE ASA CUT-OUTS ON A FRAME WITH THIS TEMPLATE.

FR 2006

TAKES SECONDS TO MARK A FRAME!

DEADBOLT FRAME TEMPLATE MAKE FAST AND ACCURATE DEADBOLT CUT-OUTS ON A FRAME WITH THIS TEMPLATE.

FR 2007

FLUSH BOLT FRAME TEMPLATE MAKE FAST AND ACCURATE FLUSH BOLT CUT-OUTS ON A FRAME WITH THIS TEMPLATE.

FR 2008

HINGE FRAME TEMPLATE MAKE FAST AND ACCURATE HINGE CUT-OUTS ON A FRAME WITH THIS TEMPLATE.

FR 2009

TEMPLATES FOR 3 1/2", 4 1/2" AND 5" HINGE CUT-OUTS, CUSTOM TEMPLATES FOR BOTH DOORS AND FRAMES ARE AVAILABLE. CONTACT US FOR FURTHER INFORMATION.

PAGE 26

LOUVERS PART NUMBER

DESCRIPTION

ILLUSTRATION

FIRE RATED DOOR LOUVER VARIETY OF SIZES AVAILABLE STEEL LOUVER - PRIME FINISH

FR 1000

VISION PROOF STEEL LOUVER VARIETY OF SIZES AVAILABLE STANDARD GRAY PRIME FINISH

FR 1100

ANODIZED ALUMINUM LOUVER VARIETY OF SIZES AVAILABLE

FR 1200

ACCEPTABLE FOR EXTERIOR USE DUE TO ANODIZED EXTRUDED SOLID ALUMINUM MATERIAL.

ULTIMATE CLASS LOUVER FR 1300

WITH SECURITY SCREWS VARIETY OF SIZES AVAILABLE AVAILABLE IN ANODIZED ALUMINUM (PVC COATED), 304 STAINLESS STEEL (PVC COATED), SOLID ARCHITECTURAL GRADE BRASS & BRONZE (POLISHED TO ANY FINISH)... ELECTROSTATICALLY POWDER COATED. MAY BE USED ON WALLS AND DOORS OF ANY THICKNESS. CONSIDERED TO BE A FLUSH LOUVER. CAN BE PUNCHED INTO A HOLLOW METAL DOOR SKIN!

DARE TO COMPARE! - OUR PRICES ARE UNBELIEVABLE. THIS IS AN INCREDIBLE PRODUCT.

ULTIMATE CLASS LOUVER WITH THRU-BOLTS VIRTUALLY ALL SIZES & FINISHES AVAILABLE

FR 1400

MAY BE USED ON WALLS AND DOORS OF ANY THICKNESS. CONSIDERED TO BE A FLUSH LOUVER. CAN BE PUNCHED INTO A HOLLOW METAL DOOR SKIN!

DARE TO COMPARE! - OUR PRICES ARE UNBELIEVABLE! SPECIFY MATERIAL, SIZE, TYPE OF CORNERS (ROUND OR SQUARE) AND NUMBER OF THRU-BOLTS WHEN ORDERING.

PAGE 27

ASTRAGALS PART NUMBER

ILLUSTRATION

DESCRIPTION

PART NUMBER

DESCRIPTION

Z-ASTRAGAL (BLANK)

Z-ASTRAGAL (ASA) ONLY

6'8", 7'0" AND 8'0"

6'8", 7'0" AND 8'0"

READY TO INSTALL.

READY TO INSTALL. TABS ARE EXTRUDED FROM METAL FOR EXTRA STRENGTH.

HOLES ARE PUNCHED AND COUNTER SUNK. SUGGESTED SCREW IS A TEK SCREW, PART NUMBER DR170B. (SEE SCREWS ON PAGE 18)

DR 280

ILLUSTRATION

~ 10 PER BUNDLE

THERE ARE NO BURN MARKS, THESE TABS WILL NEVER FALL OFF.

DR 290A

HOLES ARE PUNCHED AND COUNTER SUNK. SUGGESTED SCREW IS A TEK SCREW, PART NUMBER DR170B. (SEE SCREWS ON PAGE 18) STANDARD LOCK LOCATION FROM BOTTOM TO C/L IS 39 9/16". OTHER LOCATIONS ALSO AVAILABLE. SPECIFY WHEN ORDERING.

6'8" IS REVERSIBLE 7' & 8' ARE HANDED SPECIFY WHEN ORDERING ~ 10 PER BUNDLE

DR 290

Z-ASTRAGAL (ASA/FB)

Z-ASTRAGAL (FB) ONLY

6'8", 7'0" AND 8'0"

6'8", 7'0" AND 8'0"

READY TO INSTALL. TABS ARE EXTRUDED FROM METAL FOR EXTRA STRENGTH.

READY TO INSTALL TABS ARE EXTRUDED FROM THE METAL FOR EXTRA STRENGTH.

THERE ARE NO BURN MARKS, THESE TABS WILL NEVER FALL OFF.

THERE ARE NO BURN MARKS, THESE TABS WILL NEVER FALL OFF.

HOLES ARE PUNCHED AND COUNTER SUNK. SUGGESTED SCREW IS A TEK SCREW, PART NUMBER DR170B. (SEE SCREWS ON PAGE 18) STANDARD LOCK LOCATION FROM BOTTOM TO C/L IS 39 9/16". OTHER LOCATIONS ALSO AVAILABLE. SPECIFY WHEN ORDERING.

DR 292

HOLES ARE PUNCHED AND COUNTER SUNK. SUGGESTED SCREW IS A TEK SCREW, PART NUMBER DR170B. (SEE SCREWS ON PAGE 18)

~ 10 PER BUNDLE

6'8" IS REVERSIBLE 7' & 8' ARE HANDED SPECIFY WHEN ORDERING ~ 10 PER BUNDLE

PAGE 28

ASTRAGALS PART NUMBER

ILLUSTRATION

DESCRIPTION

U-SHAPED ASTRAGAL (BLANK)

PART NUMBER

DR 360

ILLUSTRATION

DESCRIPTION

FLAT ASTRAGAL 1/8" THICK X 1 1/2" WIDE 6'8", 7'0", AND 8'0" READY FOR INSTALLATION.

2 1/2" WIDE 6'8", 7'0", AND 8'0"

~ 10 PER BUNDLE

READY FOR INSTALLATION. 14 AND 12 GAUGE. AVAILABLE IN BRASS, BRONZE, STAINLESS STEEL OR STEEL. SPECIFY WHEN ORDERING.

DR 290U

DR 360A

ALSO AVAILABLE WITH 161 PREP AND/OR WITH SECURITY SCREWS.

FLAT ASTRAGAL 1/8" THICK X 1 1/2" WIDE 6'8", 7'0", AND 8'0" AVAILABLE IN BRASS, BRONZE, STAINLESS STEEL OR STEEL. SPECIFY WHEN ORDERING.

DR 360B

FLAT ASTRAGAL 1/8" THICK X 2" WIDE 6'8", 7'0", AND 8'0" READY FOR INSTALLATION.

~ 10 PER BUNDLE

DR 360C

FLAT ASTRAGAL 1/8" THICK X 2" WIDE 6'8", 7'0", AND 8'0" AVAILABLE IN BRASS, BRONZE, STAINLESS STEEL OR STEEL. SPECIFY WHEN ORDERING.

Z-ASTRAGAL FLUSH BOLT EXTENSION DR 297

FOR ANY EFFICIENT AND PRODUCTIVE HOLLOW METAL SHOP, THIS IS A MUST TO CARRY IN YOUR INVENTORY.

BY USING THIS EXTENSION TOGETHER WITH A BLANK Z-ASTRAGAL, YOU CAN MAKE YOUR OWN ASTRAGAL IN MINUTES.

10GA. OFFSET ASTRAGAL EXTRA HEAVY DUTY OFFSET ASTRAGAL.

DR 361

FOR ADDED STRENGTH, DURABILITY AND SECURITY.

JUST IMAGINE THE SAVINGS!

Z-ASTRAGAL ASA EXTENSION

MODEL MEA METAL EDGES 6'8", 7'0", AND 8'0"

DR 298

FOR ANY EFFICIENT AND PRODUCTIVE HOLLOW METAL SHOP, THIS IS A MUST TO CARRY IN YOUR INVENTORY.

BY USING THIS EXTENSION TOGETHER WITH A BLANK Z-ASTRAGAL, YOU CAN MAKE YOUR OWN ASTRAGAL IN MINUTES.

JUST IMAGINE THE SAVINGS!

READY FOR INSTALLATION.

DR 380

(PAIR) WITH ASTRAGAL FOR SWINGING DOORS. AVAILABLE WITH ASA AND/OR FLUSH BOLT CUT OUTS (WITH OR WITHOUT TABS) 18 GAUGE MATERIAL. AVAILABLE IN BRASS, BRONZE, STAINLESS STEEL OR STEEL. SPECIFY WHEN ORDERING.

PAGE 29

FILLERS PART NUMBER

FR 122

FR 160 A

FR 190

FR 200

SEE STRIKE SECTION STARTING ON PAGE 41 FOR FURTHER SELECTION OF STRIKE FILLERS.

DESCRIPTION

ILLUSTRATION

ESCUTCHEON SET TO COVER 2 1/8" HOLE UNDER RIM PANIC DEVICE

FLUSH BOLT STRIKE FILLER PLATE (WORKS IN CONJUNCTION WITH FR161)

~ 100 OR 200 PER BOX

T-STRIKE FILLER PLATE

(BLANK)

2 3/4" X 1 1/8" ANSI-A115-3

ASA BLANK STRIKE PLATE 4 7/8" X 1 1/4" CURVED LIP

ALSO AVAILABLE WITH STRAIGHT LIP (SEE FR350)

FR 201 FR 348

FR 350

ASA BLANK STRIKE PLATE 4 7/8" X 1 1/4" NO LIP

T-STRIKE FILLER PLATE 2 3/4" X 1 1/8" EXTENDED LIP

ASA BLANK STRIKE PLATE 4 7/8" X 1 1/4" STRAIGHT LIP

ALSO AVAILABLE WITH CURVED LIP (SEE FR200)

FR 371

FR 600 D

FR 600 F FR 601 D

FR 601 F

DEADLOCK FILLER PLATE 1 1/8" X 2 3/4" NO CUT-OUT

HINGE FILLER PLATE FOR 4 1/2" HINGES FOR DOORS (1 1/2" X 4 1/2")

~ 50 OR 100 PER BOX

HINGE FILLER PLATE FOR 4 1/2" HINGES FOR FRAMES (1 5/8" X 4 1/2")

~ 50 OR 100 PER BOX

HINGE FILLER PLATE FOR 5" HINGES FOR DOORS (1 1/2" X 5")

~ 50 OR 100 PER BOX

HINGE FILLER PLATE FOR 5" HINGES FOR FRAMES (1 5/8" X 5")

~ 50 OR 100 PER BOX

PAGE 30

FILLERS PART NUMBER

SEE STRIKE SECTION STARTING ON PAGE 41 FOR FURTHER SELECTION OF STRIKE FILLERS.

DESCRIPTION

ILLUSTRATION

FILLER PLATE LOCK EDGE DR 100

1 1/8" X 2 1/4"

ESCUTCHEON SET DR 150

TO COVER 2 1/8" 161 HOLE

ESCUTCHEON SET DR 152

TO COVER 1 1/2" DEADBOLT HOLE

LOCK PUNCHOUT DR 160

DR 161

(FOR 161 LOCK) 2 1/8" DIA. PRIMED OR STAINLESS STEEL, ALSO AVAILABLE IN OTHER FINISHES. SPECIFY WHEN ORDERING.

DEADBOLT PUNCHOUT

(FOR DEADBOLT) 1 1/2" DIA. PRIMED, ALSO AVAILABLE IN OTHER FINISHES. SPECIFY WHEN ORDERING.

DEADBOLT PUNCHOUT DR 161 A

DR 162

DR 164

(FOR DEADBOLT) 2 1/8" DIA. PRIMED, ALSO AVAILABLE IN OTHER FINISHES. SPECIFY WHEN ORDERING.

FLUSH BOLT FILLER PLATE 1" X 6 3/4" USED TO BLANK OFF FLUSH BOLT CUT OUT IN DOOR EDGE. SUPPLIED WITHOUT HOLES FOR WELDED APPLICATIONS.

FLUSH BOLT FILLER PLATE 1" X 6 3/4" USED TO BLANK OFF FLUSH BOLT CUT OUT IN DOOR EDGE. IDEAL FOR FIELD APPLICATION.

ASA BLANK FILLER PLATE DR 166

1 1/4" X 4 7/8" SUPPLIED WITHOUT HOLES AND WITH A STRAIGHT LIP. FOR WELDED APPLICATIONS.

~ 50 OR 100 PER BOX

PAGE 31

FILLERS PART NUMBER

SEE STRIKE SECTION STARTING ON PAGE 41 FOR FURTHER SELECTION OF STRIKE FILLERS.

DESCRIPTION

ILLUSTRATION

HINGE BLANK FILLER PLATE DR 168

AVAILABLE 4", 4 1/2", OR 5" LONG. SUPPLIED WITHOUT HOLES. FOR WELDED APPLICATIONS. FOR FRAMES AND DOORS.

MORTISE LOCK FILLER PLATE DR 350

(86 EDGE FILLER) 1 1/4" X 8"

~ 50 OR 100 PER BOX

LATCH EDGE FILLER PLATE DR 406

1 1/8" X 2 1/4" USED TO BLANK OFF A LATCH CUT OUT ON EDGE OF DOOR. SUPPLIED WITHOUT HOLES. FOR WELDED APPLICATIONS.

CYLINDER ADAPTER RING DR 408

REDUCES A 2 1/8" HOLE TO A 1 1/4" HOLE. FOR USE WITH CYLINDERS. AVAILABLE IN A VARIETY OF FINISHES.

ADAPTER RING DR 409

ALLOWS FOR USE OF GRADE 1 KEY-IN-LEVERS ON 1 3/8" DOORS.

BACKSET CONVERTER DR 410

CONVERTS 2 3/8" BACKSETS TO 2 3/4" FITS UNDER THE ROSE OF KEY-IN-KNOB OR DEADBOLT LOCKS. AVAILABLE IN 32D, PRIME AND OTHER FINISHES.

BACKSET CONVERTER DR 411

CONVERTS 2 3/8" BACKSETS TO 2 3/4" FITS UNDER DEADBOLT COLLARS.

PAGE 32

SHIMS PART NUMBER

DESCRIPTION

ILLUSTRATION

SHIMS FOR EXIT DEVICES VIRTUALLY ANY SHIM YOU NEED! SPECIFY PANIC DEVICE AND SHIM THICKNESS WHEN ORDERING.

FR 249

HINGE SHIMS FOR 4 1/2" TEMPLATE BUTTS.

FR 250

HINGE SHIMS FOR 4 1/2" TEMPLATE BUTTS.

FR 260

HINGE SHIMS FR 260 A

OTHER PROFILES ALSO AVAILABLE. SPECIFY WHEN ORDERING.

HINGE SHIMS FR 260 B

FOR 4" TEMPLATE BUTTS.

HINGE SHIMS FOR 5" TEMPLATE BUTTS.

FR 261

HINGE SHIMS FR 262

FOR 3 1/2" TEMPLATE BUTTS.

PAGE 33

SHIMS PART NUMBER

FR 263

FR 264

DESCRIPTION

ILLUSTRATION

HINGE SHIMS WITH DOOR SEAM FILLER 20GA. FOR 4 1/2" TEMPLATE BUTTS.

HINGE SHIMS WITH DOOR SEAM FILLER 20GA. FOR 5" TEMPLATE BUTTS.

HALF HINGE SHIMS FR 265

WITH 4 SLOTS FOR 4 1/2" TEMPLATE BUTTS.

HALF HINGE SHIMS FR 266

WITH 2 SLOTS FOR 4 1/2" TEMPLATE BUTTS.

PAGE 34

MISCELLANEOUS PART NUMBER

DESCRIPTION

ILLUSTRATION

CORNER GUARDS FR 665

FR 660

FR 661

FR 662

STANDARD SIZES: A - 2" X 2" X 48", B - 3 1/2" X 3 1/2" X 48", C - 4" X 4" X 48". THIS PRODUCT IS USED TO PROTECT WALL CORNERS IN HEAVY TRAFFIC AREAS. IT CAN BE ORDERED WITH HOLES AND SELF-TAPPING SCREWS, OR WITHOUT HOLES AND ADHESIVE TAPE. AVAILABLE IN STAINLESS STEEL, BRASS, BRONZE, AND STEEL. SPECIFY SIZE AND FINISH WHEN ORDERING.

SMOKE GASKET (340' REELS) ADHESIVE BACKING

SMOKE GASKET (17' PACKAGE) ADHESIVE BACKING

SMOKE GASKET (20' PACKAGE) ADHESIVE BACKING

DOOR EXTENDER 18 GA. OTHER GAGES AVAILABLE AVAILABLE IN 4' OR 8' LENGTHS. SPECIFY LENGTH WHEN ORDERING.

DR 319

TOP AND BOTTOM END CHANNEL DR 320

FOR 1 3/4" THICK DOOR. 16 GA. GALVANEALED MATERIAL. SOLD IN 10' LENGTHS.

~ 10 PER BUNDLE

DR 320 A

TOP AND BOTTOM END CHANNEL FOR 1 3/4" THICK DOOR. 16 GA. GALVANEALED MATERIAL. SOLD CUT-TO-SIZE. SPECIFY LENGTH WHEN ORDERING.

STEEL CAPPING CHANNEL DR 330

FOR 1 3/4" THICK DOOR. 18 GA. GALVANEALED MATERIAL. SOLD IN 10' LENGTHS.

~ 10 PER BUNDLE

DR 330 A

STEEL CAPPING CHANNEL FOR 1 3/4" THICK DOOR. 18 GA. GALVANEALED MATERIAL. SOLD CUT-TO-SIZE. SPECIFY LENGTH WHEN ORDERING.

FITS INSIDE MAIN DOOR CHANNEL (DR320)

PAGE 35

MISCELLANEOUS PART NUMBER

DR 383

DR 383 A

DR 383 S

DR 383 AS

DESCRIPTION

ILLUSTRATION

VINYL TOP CAP USED TO SEAL THE TOP OF EXTERIOR DOORS. 10' LONG. EASY TO INSTALL. NO WELDING, NO RUSTING.

~ 20 PER BOX

VINYL TOP CAP PRE-CUT SPECIFY DOOR WIDTH, PRICED PER FOOT.

~ 10 PER BUNDLE

DROP-IN STEEL TOP CAP USED TO SEAL THE TOP OF EXTERIOR DOORS. EASY TO INSTALL. A60 GALVANEALED. 10' LENGTHS

~ 10 PER BUNDLE

DROP-IN STEEL TOP CAP PRE-CUT EASY TO INSTALL. CUT AND NOTCHED FOR BEVELED DOORS. ALSO AVAILABLE STRAIGHT CUT. SPECIFY SIZE WHEN ORDERING.

~ 10 PER BUNDLE

DR 384

SCREW-IN STEEL TOP CAP TO BE SCREWED INTO THE TOP CHANNEL IN ORDER TO MAKE THE TOP OF THE DOOR FLUSH. A60 GALVANEALED. 10' LENGTHS

~ 10 PER BUNDLE

DR 384 AS

SCREW-IN STEEL TOP CAP PRE-CUT EASY TO INSTALL. CUT AND NOTCHED FOR BEVELED DOORS. SPECIFY SIZE WHEN ORDERING.

~ 10 PER BUNDLE

DROP-IN STEEL TOP CAP PRE-CUT DR 384 AT

EASY TO INSTALL. CUT AND NOTCHED FOR BEVELED DOORS.

PRESS FITS IN PLACE, NO SCREWS OR WELDING REQUIRED. SPECIFY SIZE WHEN ORDERING.

~ 10 PER BUNDLE

DOOR EDGE GUARD 6'8", 7', 8', AND 10' AVAILABLE IN 20, 18, 16 GAUGE STEEL, STAINLESS STEEL, BRASS, AND BRONZE.

DR 396

PROTECTS NEW DOORS AND COVERS IMPERFECTIONS ON OLD DOORS. ARCHITECTURAL FINISHES ADD TO THE AESTHETICS OF THE DOOR OPENING. AVAILABLE IN BLANK EDGE, 161 EDGE, 86 EDGE, ASA AND FLUSH BOLT CUT OUTS.

WALL EDGE GUARD DR 397

AVAILABLE IN 20, 18, 16 GAUGE STEEL, STAINLESS STEEL, BRASS AND BRONZE. PROTECTS CORNERS OF WALLS, PARTICULARLY NEAR DOOR OPENINGS. CAN BE ORDERED IN ANY SIZE OR PROFILE, WHEN ORDERING SPECIFY.

PAGE 36

MISCELLANEOUS PART NUMBER

DESCRIPTION

ILLUSTRATION

DOOR BOTTOM SWEEP DR 429

MANUFACTURED AS RIGID VINYL ASSEMBLY WITH FLEXIBLE VINYL FINS. FURNISHED WITH SELF-TAPPING SCREWS. AVAILABLE IN BLACK OR GREY SOLD CUT-TO-SIZE AND 12'’ LENGTHS. SPECIFY LENGTH WHEN ORDERING.

SECURITY BAR (OUTSWING) DR 430

STEEL SQUARE TUBING. ADJUSTABLE TO DIFFERENT FRAME JAMB DEPTHS (UP TO 8 3/4"). AVAILABLE IN PLATED ZINC, CHROME, OR PAINTED BROWN. SPECIFY DOOR WIDTH WHEN ORDERING.

SECURITY BAR (INSWING) DR 432

STEEL SQUARE TUBING. AVAILABLE IN PLATED ZINC, CHROME, OR PAINTED BROWN. SPECIFY DOOR WIDTH WHEN ORDERING.

CORNER BRACKET FR 130

L.H. & R.H. SPECIFY HANDING WHEN ORDERING.

~ 450 PER BOX

LH

RH

ASA STRIKE BOX REINFORCEMENT FR 150

FOR 4 7/8" STRIKE AVAILABLE WITH OR WITHOUT WELDING DIMPLES.

~ 150 OR 300 PER BOX

DEADBOLT - ”T“ STRIKE BOX FR 152

FOR 2 3/4" STRIKE AVAILABLE WITH OR WITHOUT WELDING DIMPLES.

~ 250 OR 700 PER BOX

FLUSH BOLT STRIKE BOX FR 154

~ 100 OR 200 PER BOX

MULLION BRACKET FR 210

PAGE 37

MISCELLANEOUS PART NUMBER

DESCRIPTION

ILLUSTRATION

SPREADER BAR FR 280

10' LONG 5/8" X 5/8" L - SHAPED OTHER GAUGES AND PROFILES AVAILABLE.

~ 50 PER BUNDLE

SPREADER BAR FR 280 A

CUT-TO-SIZE (WITH A TOLERANCE OF +- .010") 5/8" X 5/8" L - SHAPED (ALSO AVAILABLE IN U-SHAPED) OTHER GAUGES AND PROFILES AVAILABLE. SPECIFY LENGTH WHEN ORDERING.

~ 100 PER BUNDLE

DOOR FRAME DRIP CAP 18 GA FR 679

SUPPLIED WITH SELF-DRILLING, SELF-TAPPING SCREWS. AVAILABLE IN A60 GALVANEALED STEEL, STAINLESS STEEL (304) OR ALUMINUM.

DOOR REPAIR KITS DR 400

2" X DOOR THICKNESS X 2" FOR HOLLOW METAL OR WOOD DOORS. TO REPAIR RUSTED OR DAMAGED DOOR BOTTOMS. CAN BE SUPPLIED WITH HOLES AND SELF-DRILLING SCREWS, OR WITHOUT HOLES AND ADHESIVE TAPE. AVAILABLE IN STAINLESS STEEL (304), BRASS OR BRONZE. CUSTOM SIZES AVAILABLE. SPECIFY DOOR WIDTH WHEN ORDERING.

DOOR REPAIR KITS DR 402

2" X DOOR THICKNESS X 6" FOR HOLLOW METAL OR WOOD DOORS. TO REPAIR RUSTED OR DAMAGED DOOR BOTTOMS. CAN BE SUPPLIED WITH HOLES AND SELF-DRILLING SCREWS, OR WITHOUT HOLES AND ADHESIVE TAPE. AVAILABLE IN STAINLESS STEEL (304), BRASS OR BRONZE. CUSTOM SIZES AVAILABLE. SPECIFY DOOR WIDTH WHEN ORDERING.

DOOR REPAIR KITS DR 404

6" X DOOR THICKNESS X 6" FOR HOLLOW METAL OR WOOD DOORS. TO REPAIR RUSTED OR DAMAGED DOOR BOTTOMS. CAN BE SUPPLIED WITH HOLES AND SELF-DRILLING SCREWS, OR WITHOUT HOLES AND ADHESIVE TAPE. AVAILABLE IN STAINLESS STEEL (304), BRASS OR BRONZE. CUSTOM SIZES AVAILABLE. SPECIFY DOOR WIDTH WHEN ORDERING.

THERMAL BREAK JOINER 10' LONG

DR 542

FOR PRESSED STEEL FRAMES RIGID VINYL MATERIAL JOINER & WEDGE SUPPLIED AS ONE PIECE ASSEMBLY. AVAILABLE IN BLACK ONLY.

PAGE 38

MISCELLANEOUS PART NUMBER

DESCRIPTION

ILLUSTRATION

DUTCH DOOR SHELF GALVANEALED STEEL. STAINLESS STEEL ALSO AVAILABLE. STANDARD DEPTH 8" (OTHER DEPTHS AVAILABLE, SPECIFY WHEN ORDERING).

SPECIFY DOOR WIDTH AND THICKNESS WHEN ORDERING.

DDS 400

GREY PRIMER IDEAL FOR HOLLOW METAL TOUCH-UPS. VERY QUICK DRY TIME.

~ 6 CANS PER BOX

DR 377

O.E.M. ACCOUNTS: UNDER OUR PRIVATE LABELING PROGRAM, WE WOULD BE HAPPY TO QUOTE YOU ON ANY ADDITIONAL PRODUCT, PART, OR COMPONENT. FOR SPECIAL PRICING, CONTACT OUR O.E.M. ACCOUNT REPRESENTATIVE.

WE DESIGN, DEVELOP, AND BUILD: TOOLS AND DIES, PROGRESSIVE AND SINGLE STAGE MOULDS AS WELL AS MACHINERY SUCH AS METAL STAMPING, PUNCHING, OR ROLL FORMING MACHINES. ALSO, WE CAN BUILD YOU AN ENTIRE TURN KEY SYSTEM SHOULD YOU WISH TO PRODUCE YOUR OWN DOORS, FRAMES, OR ANY OTHER RELATED PRODUCT. IF YOU NEED ANY ASSISTANCE IN ANY OF THE ABOVE AREAS, PLEASE CONTACT OUR ENGINEERING DEPARTMENT.

PAGE 39

MISCELLANEOUS PART NUMBER

DESCRIPTION

ILLUSTRATION

OPEN BACK STRIKE AVAILABLE IN ALL ARCHITECTURAL FINISHES. SPECIFY HANDING WHEN ORDERING.

DR 18

ELECTRIC MORTAR BOX FR 624 7"

SERVES AS MORTAR SHIELD. KNOCKOUTS TOP AND BOTTOM FOR STANDARD CONDUIT FITTING. STANDARD 7" OR 12" LONG OTHER SIZES AVAILABLE. SPECIFY WHEN ORDERING. AVAILABLE IN STEEL AND STAINLESS STEEL FINISH. SPECIFY WHEN ORDERING.

FR 624 12"

~ 10, 20, 50 OR 100 PER BOX

12" LONG

ELECTRIC MORTAR BOX END CAP KNOCKOUTS FOR STANDARD CONDUIT FITTING. COMES WITH SCREW.

FR 624 A

AUTOMATIC FLUSH BOLT CAP AVAILABLE IN STEEL AND STAINLESS STEEL FINISH. SPECIFY WHEN ORDERING.

DR 626

PAGE 40

STRIKES PART NUMBER

DESCRIPTION

ILLUSTRATION

FLUSH BOLT STRIKE FR 160

ANSI-A-115.4

FLUSH BOLT STRIKE FILLER PLATE FR 160 A

FR 190

FR 200

(WORKS IN CONJUNCTION WITH FR161)

T-STRIKE FILLER PLATE

(BLANK)

2 3/4" X 1 1/8" ANSI-A115-3 AVAILABLE IN A VARIETY OF FINISHES.

ASA BLANK STRIKE PLATE 4 7/8" X 1 1/4" CURVED LIP

ALSO AVAILABLE WITH STRAIGHT LIP (SEE FR350) AVAILABLE IN A VARIETY OF FINISHES.

FR 201

FR 300

FR 300 M

ASA BLANK STRIKE PLATE 4 7/8" X 1 1/4" NO LIP AVAILABLE IN A VARIETY OF FINISHES.

ASA STRIKE 4 7/8" X 1 1/4" AVAILABLE IN A VARIETY OF FINISHES.

ASA STRIKE 4 7/8" X 1 1/4" AVAILABLE IN A VARIETY OF FINISHES.

ASA MORTISE STRIKE 4 7/8" X 1 1/4" AVAILABLE WITH CURVED LIP, STRAIGHT LIP AND NO LIP FINISHES: PRIMED, 32D, US3, 10B SPECIFY LIP AND FINISH WHEN ORDERING.

FR 330

CURVED LIP

STRAIGHT LIP

NO LIP

PAGE 41

STRIKES PART NUMBER

DESCRIPTION

ILLUSTRATION

ASA DEADBOLT STRIKE FR 340

4 7/8" X 1 1/4" NO LIP

ALSO AVAILABLE WITH CURVED LIP OR STRAIGHT LIP (SEE FR360) AVAILABLE IN A VARIETY OF FINISHES.

ASA OFFSET STRIKE FR 345

4 7/8" X 1 1/4" AVAILABLE IN A VARIETY OF FINISHES.

FULL WIDTH STRIKE FR 346

AVAILABLE IN A VARIETY OF FINISHES.

CUSTOM STRIKES VIRTUALLY ALL TYPES OF CUSTOM STRIKES AVAILABLE.

FR 347

ADVISE FINISH, QUANTITY, GAGE AND DIMENSIONS (TO BE ACCOMPANIED BY DETAILED DRAWING) WHEN ORDERING. AVAILABLE IN A VARIETY OF FINISHES.

T-STRIKE FILLER PLATE FR 348

2 3/4" X 1 1/8" EXTENDED LIP AVAILABLE IN A VARIETY OF FINISHES.

FLUSH BOLT STRIKE

(FOR WOOD DOORS)

FR 349

ASA BLANK STRIKE PLATE FR 350

4 7/8" X 1 1/4" STRAIGHT LIP

ALSO AVAILABLE WITH CURVED LIP (SEE FR200) AVAILABLE IN A VARIETY OF FINISHES.

PAGE 42

STRIKES PART NUMBER

DESCRIPTION ROLLER LATCH STRIKE

FR 351

ILLUSTRATION

(ASA)

4 7/8" X 1 1/4" AVAILABLE IN A VARIETY OF FINISHES.

EXTENDED LIP STRIKE FR 352

4 7/8" X 1 1/4" X 5" LIP AVAILABLE IN A VARIETY OF FINISHES.

EXTENDED LIP STRIKE FR 353

(T-STRIKE)

CURVED LIP AVAILABLE IN A VARIETY OF FINISHES.

T-STRIKE WITH RETURN FR 354

FR 355

2 3/4" X 1 1/8" AVAILABLE IN A VARIETY OF FINISHES.

ROLLER LATCH T-STRIKE WITH RETURN 2 3/4" X 1 1/8" AVAILABLE IN A VARIETY OF FINISHES.

WOOD DOOR STRIKE FR 356

2 1/4" X 1 1/8" AVAILABLE IN A VARIETY OF FINISHES.

ASA STRIKE

(FOR USE WITH DEADBOLTS)

4 7/8" X 1 1/4" AVAILABLE WITH CURVED LIP OR STRAIGHT LIP AVAILABLE IN A VARIETY OF FINISHES SPECIFY LIP AND FINISH WHEN ORDERING.

FR 360

ALSO AVAILABLE WITH NO LIP (SEE FR340)

PAGE 43

STRIKES PART NUMBER

DESCRIPTION

ILLUSTRATION

SHORT DEADBOLT STRIKE FR 370 A

2 3/4" X 1 1/8" WITH CUT-OUT AVAILABLE IN A VARIETY OF FINISHES.

DEADLOCK FILLER PLATE FR 371

1 1/8" X 2 3/4" NO CUT-OUT

T-STRIKE FR 375

2 3/4" X 1 1/8" WITH CUT-OUT AVAILABLE WITH CURVED LIP OR STRAIGHT LIP AVAILABLE IN A VARIETY OF FINISHES SPECIFY LIP AND FINISH WHEN ORDERING.

DRIVE-IN THIMBLE STRIKE (FOR WOOD & METAL JAMB INSTALLATION) NICKEL OR BRASS PLATED.

FR 390

MADE BY

STAINLESS STEEL MORTISE LOCKS PAGE 44

EXIT DEVICE STRIKES

AVAILABLE IN STAINLESS STEEL (32D), DURONAUTIC, OIL RUBBED BRONZE (10B), DULL BRONZE (10), BRIGHT BRASS (3) AND PRIME

No.11 Strike used only on double doors in conjunction with rim type devices

No.14

No.15

Top strike, surface mounted

Bottom strike, mortised into floor

NEW

NEW

Stainless Steel Bright Mirror Finish

Stainless Steel Matt Finish

No.18

No.19

For double doors, handed RHR shown

For double doors

Specify hand when ordering.

No.22

No.23

For single door

For single narrow stile aluminum door in conjunction with 1900 Exit Device

No.26

No.27

For single door in conjunction with 2150 Exit Device

For 1800 Exit Device

PAGE 45

EXIT DEVICE STRIKES

AVAILABLE IN STAINLESS STEEL (32D), DURONAUTIC, OIL RUBBED BRONZE (10B), DULL BRONZE (10), BRIGHT BRASS (3) AND PRIME

No.12

No.13

For single door

For single door, made of stainless steel only

No.16

No.17

Top strike

Surface Bolt

No.20

No.21

Surface Bolt Bottom strike

For single door, handed RHR shown

No.24

No.25

For single door, supplied standard with 1900 Exit Device

For use with Strike #26 on frames with 1/2â&#x20AC;? stop, not for use with Fire Rated Exit Device

Top strike

No.28 Double Door Strike For 2150 Exit Device

PAGE 46

SPECIALTY STRIKES PART NUMBER

FR 700

FR 701

FR 702

FR 703

ILLUSTRATION

DESCRIPTION

PART NUMBER

ILLUSTRATION

DESCRIPTION

18" LONG

12" LONG

MADE FOR 1 3/8" DOOR

MADE FOR 1 3/8" DOOR

DESIGNED FOR 3 5/8" AND 4" CENTERED LOCKSETS.

6" CENTERS.

FINISHES AVAILABLE: A60 GALV., ZINC PLATED, BRASS PLATED OR SOLID STAINLESS STEEL (304, POLISHED AND PVC COATED)

FR 704

FINISHES AVAILABLE: A60 GALV., ZINC PLATED, BRASS PLATED OR SOLID STAINLESS STEEL (304, POLISHED AND PVC COATED)

18" LONG

12" LONG

MADE FOR 1 3/8" DOOR

MADE FOR 1 3/8" DOOR

6" CENTERS.

WORKS WITH KEY-IN-KNOB OR DEADBOLT.

FINISHES AVAILABLE: A60 GALV., ZINC PLATED, BRASS PLATED OR SOLID STAINLESS STEEL (304, POLISHED AND PVC COATED)

FR 705

FINISHES AVAILABLE: A60 GALV., ZINC PLATED, BRASS PLATED OR SOLID STAINLESS STEEL (304, POLISHED AND PVC COATED)

18" LONG

12" LONG

MADE FOR 1 3/8" DOOR

MADE FOR 1 3/8" DOOR

MORTISE LOCK

DESIGNED FOR 3 5/8" AND 4" CENTERED LOCKSETS.

FINISHES AVAILABLE: A60 GALV., ZINC PLATED, BRASS PLATED OR SOLID STAINLESS STEEL (304, POLISHED AND PVC COATED)

FR 706

FINISHES AVAILABLE: A60 GALV., ZINC PLATED, BRASS PLATED OR SOLID STAINLESS STEEL (304, POLISHED AND PVC COATED)

18" LONG

12" LONG

MADE FOR 1 3/8" DOOR

MADE FOR 1 3/4" DOOR

WORKS WITH KEY-IN-KNOB OR DEADBOLT.

6" CENTERS.

FINISHES AVAILABLE: A60 GALV., ZINC PLATED, BRASS PLATED OR SOLID STAINLESS STEEL (304, POLISHED AND PVC COATED)

FR 707

FINISHES AVAILABLE: A60 GALV., ZINC PLATED, BRASS PLATED OR SOLID STAINLESS STEEL (304, POLISHED AND PVC COATED)

PAGE 47

SPECIALTY STRIKES PART NUMBER

FR 708

ILLUSTRATION

DESCRIPTION

PART NUMBER

DEADBOLT STRIKE

MADE FOR 1 3/4" DOOR

4 7/8" X 1 3/8" (HEAVY DUTY)

WORKS WITH KEY-IN-KNOB OR DEADBOLT.

FINISHES AVAILABLE: A60 GALV., ZINC PLATED, BRASS PLATED OR SOLID STAINLESS STEEL (304, POLISHED AND PVC COATED)

FINISHES AVAILABLE: A60 GALV., ZINC PLATED, BRASS PLATED OR SOLID STAINLESS STEEL (304, POLISHED AND PVC COATED)

FR 712

KEY-IN-KNOB STRIKE

MADE FOR 1 3/4" DOOR

4 7/8" X 1 3/8"

DESIGNED FOR MORTISE LOCK FINISHES AVAILABLE: A60 GALV., ZINC PLATED, BRASS PLATED OR SOLID STAINLESS STEEL (304, POLISHED AND PVC COATED)

FR 713

8" LONG

FOR 1 3/8" DOOR

WORKS WITH KEY-IN-KNOB OR DEADBOLT.

FR 711

FINISHES AVAILABLE: A60 GALV., ZINC PLATED, BRASS PLATED OR SOLID STAINLESS STEEL (304, POLISHED AND PVC COATED)

FINISHES AVAILABLE: A60 GALV., ZINC PLATED, BRASS PLATED OR SOLID STAINLESS STEEL (304, POLISHED AND PVC COATED)

DOOR EDGE REINFORCEMENT

MADE FOR 1 3/8" DOOR

FR 710

DESCRIPTION

12" LONG

12" LONG

FR 709

ILLUSTRATION

FR 714

FOR DEADBOLT AND KEY-IN-KNOB LOCKS. FINISHES AVAILABLE: A60 GALV., ZINC PLATED, BRASS PLATED OR SOLID STAINLESS STEEL (304, POLISHED AND PVC COATED)

SECURITY DEADBOLT STRIKE

DOOR EDGE REINFORCEMENT

8" X 1 3/8" (HEAVY DUTY)

FOR 1 3/4" DOOR

FINISHES AVAILABLE: A60 GALV., ZINC PLATED, BRASS PLATED OR SOLID STAINLESS STEEL (304, POLISHED AND PVC COATED)

FR 715

FOR DEADBOLT AND KEY-IN-KNOB LOCKS. FINISHES AVAILABLE: A60 GALV., ZINC PLATED, BRASS PLATED OR SOLID STAINLESS STEEL (304, POLISHED AND PVC COATED)

PAGE 48

SPECIALTY STRIKES PART NUMBER

ILLUSTRATION

DESCRIPTION

PART NUMBER

9" DOOR EDGE REINFORCEMENT

FR 716

FINISHES AVAILABLE: A60 GALV., ZINC PLATED, BRASS PLATED OR SOLID STAINLESS STEEL (304, POLISHED AND PVC COATED)

FOR 1 3/4" DOOR

FR 720

9" DOOR EDGE REINFORCEMENT

FR 717

FINISHES AVAILABLE: A60 GALV., ZINC PLATED, BRASS PLATED OR SOLID STAINLESS STEEL (304, POLISHED AND PVC COATED)

FR 721

FINISHES AVAILABLE: A60 GALV., ZINC PLATED, BRASS PLATED OR SOLID STAINLESS STEEL (304, POLISHED AND PVC COATED)

FOR DEADBOLT AND KEY-IN-KNOB LOCKS. FINISHES AVAILABLE: A60 GALV., ZINC PLATED, BRASS PLATED OR SOLID STAINLESS STEEL (304, POLISHED AND PVC COATED)

9" BLANK WRAP-AROUND DOOR EDGE REINFORCEMENT

FOR 1 3/8" DOOR

FR 718

FINISHES AVAILABLE: A60 GALV., ZINC PLATED, BRASS PLATED OR SOLID STAINLESS STEEL (304, POLISHED AND PVC COATED)

FOR 1 3/4" DOOR

BLANK DOOR EDGE REINFORCEMENT FOR DEADBOLT AND KEY-IN-KNOB LOCKS.

FOR DEADBOLT AND KEY-IN-KNOB LOCKS.

9" BLANK DOOR EDGE REINFORCEMENT

FOR 1 3/4" DOOR FOR DEADBOLT AND KEY-IN-KNOB LOCKS.

DESCRIPTION

9" WRAP-AROUND DOOR EDGE REINFORCEMENT

FOR 1 3/8" DOOR FOR DEADBOLT AND KEY-IN-KNOB LOCKS.

ILLUSTRATION

FR 722

FOR 1 3/4" DOOR FOR DEADBOLT AND KEY-IN-KNOB LOCKS. FINISHES AVAILABLE: A60 GALV., ZINC PLATED, BRASS PLATED OR SOLID STAINLESS STEEL (304, POLISHED AND PVC COATED)

BLANK DOOR EDGE REINFORCEMENT FOR 1 3/4" DOOR

FR 719

FOR DEADBOLT AND KEY-IN-KNOB LOCKS. FINISHES AVAILABLE: A60 GALV., ZINC PLATED, BRASS PLATED OR SOLID STAINLESS STEEL (304, POLISHED AND PVC COATED)

PAGE 49

SHOP SUPPLY PART NUMBER

DESCRIPTION

ILLUSTRATION

RESIN FIBRE DISC 80 GRIT ALU 4 1/2" X 7/8" HOLE

DR 371

RESIN FIBRE DISC 24 GRIT ALU 7" X 7/8" HOLE

DR 372

RESIN FIBRE DISC 80 GRIT ALU 7" X 7/8" HOLE

DR 373

DEPRESSED CENTRE DISC GRIT 24 5" X 1/4" X 7/8" HOLE

DR 374

DR 375

DR 376

DR 378

DR 379

JIG SAW BLADE FOR CUTTING DOORS OR FRAMES. UNIVERSAL FITTING FOR MAJOR JIGSAW MANUFACTURERS.

CUT SAW BLADE FOR CUTTING DOORS & FRAMES IN SHOP OR SITE WORK. UNIVERSAL FITTING FOR MAJOR SAW MANUFACTURERS.

WIRE FOR MIG WELDERS SPOOLS OF .023 DIA. AVAILABLE IN 1KG, 5KG, 15KG AND 20KG

ARC WELDING ELECTRODES 3/32" DIA. 5KG BOX (300LBS.)

PAGE 50

PRODUCTION MACHINERY PROGRESSIVE DIES

AND

PRODUCTION DIES WE MANUFACTURE HIGH SPEED PROGRESSIVE DIES, MOULDS, SINGLE STAGE DIES AND FIXTURES, IN-DIE TAPPING UNITS, ETC., USED IN METAL STAMPING OR FABRICATION INDUSTRIES INCLUDING ROLLFORMING MACHINES AND COMPLETE TURN KEY SYSTEMS. PLEASE CONTACT OUR ENGINEERING DEPARTMENT FOR DETAILS.

PAGE 51

PRODUCTION MACHINERY PROGRESSIVE DIES

AND

PROGRESSIVE DIES WE DESIGN AND BUILD PROGRESSIVE DIES OF ANY KIND, INCLUDING HIGH SPEED IN-DIE TAPPING UNITS.

ROLLFORMERS WE DESIGN AND BUILD ROLLFORMERS AND ROLL TOOLING.

PAGE 52

LOCKS AND EXIT DEVICES PART NUMBER

6000 SERIES

DESCRIPTION

ILLUSTRATION

GRADE 1 AND 2 CYLINDRICAL KEY-IN-LEVER LOCK (HEAVY DUTY) 3000 SERIES ALSO AVAILABLE

AVAILABLE IN ALL ARCHITECTURAL FINISHES

7100 SERIES

SOLID STAINLESS STEEL MORTISE LOCK (HEAVY DUTY) AVAILABLE IN ALL ANSI FUNCTIONS AND VARIETY OF FINISHES FIRE RATED FOR 3 HRS

MILD STEEL MORTISE LOCK (HEAVY DUTY)

7500 SERIES

AVAILABLE IN ALL ANSI FUNCTIONS AND VARIETY OF FINISHES FIRE RATED FOR 3 HRS

HEAVY DUTY SERIES DEADBOLT LOCK A2214

FOR DOORS 1 3/8" TO 1 3/4" THICK AVAILABLE IN ALL ARCHITECTURAL FINISHES AND VARIETY OF FUNCTIONS

HEAVY DUTY SERIES KNOB LATCH 1084

FOR DOORS 1 3/8" TO 1 3/4" THICK AVAILABLE IN ALL ARCHITECTURAL FINISHES AND VARIETY OF FUNCTIONS

FULL LINE OF PANIC DEVICES N2150

FROM ECONOMY LINE TO HEAVY DUTY DEVICES (FIRE AND NON-FIRE RATED) AVAILABLE IN ALL ARCHITECTURAL FINISHES

CYLINDRICAL LOCK CYLINDER 6 PIN

300 SERIES

807 SERIES

AVAILABLE IN 26 DIFFERENT KEYWAYS AND SCHLAGE “C” KEYWAYS

INTERCHANGEABLE CORE CYLINDER MORTISE, RIM AND ADAMS RITE CYLINDERS PLUS MUCH MORE.

PAGE 53

LOCKS AND EXIT DEVICES PART NUMBER

DESCRIPTION

ILLUSTRATION

MORTISE CYLINDER 951

1 1/8" OR 1 1/4" LENGTHS 6 OR 7 PIN AVAILABLE IN 26 DIFFERENT KEYWAYS AND SCHLAGE “C” KEYWAYS

RIM CYLINDER 6 OR 7 PIN

956

AVAILABLE IN 26 DIFFERENT KEYWAYS AND SCHLAGE “C” KEYWAYS

ADA COMPLIANCE KIT ADAPTABLE TO VIRTUALLY ALL MORTISE LOCK MANUFACTURERS IN NORTH AMERICA

ADA

AVAILABLE IN ALL ARCHITECTURAL FINISHES

KIT

ARCHITECTURAL & COMMERCIAL GRADE HINGES GBB

AVAILABLE IN VARIOUS SIZES, MODELS AND FINISHES

SERIES

UNBELIEVABLE PRICING!

EXIT DEVICES

AVAILABLE IN ALL ARCHITECTURAL FINISHES

PAGE 54

HARDWARE PART NUMBER

DESCRIPTION

ILLUSTRATION

EXTENSION FLUSH BOLT 1" X 6 3/4" FACE WITH 12" ROD

DR 1500

FOR USE IN HOLLOW METAL DOORS TO SECURE INACTIVE LEAF IN A PAIR OF DOORS. FINISHES: 26D, 10, 10B, 4, 5, 3, 26 FIRE RATED FOR 1½ HRS

FLUSH BOLT ROUNDED FACE FOR ROUTER INSTALLATION FOR USE IN WOOD DOORS TO SECURE INACTIVE LEAF IN A PAIR OF DOORS.

DR 1510

FLUSH BOLT FOR USE IN WOOD DOORS TO SECURE INACTIVE LEAF IN A PAIR OF DOORS.

DR 1520

SURFACE BOLT - LARGE FOR USE AS TOP AND/OR BOTTOM BOLT TO SECURE INACTIVE LEAF IN A PAIR OF DOORS.

DR 1530

SURFACE BOLT - SMALL FOR USE AS A TOP AND/OR BOTTOM BOLT TO SECURE INACTIVE LEAF IN A PAIR OF DOORS.

DR 1540

PAGE 55

HARDWARE PART NUMBER

DESCRIPTION

ILLUSTRATION

CONCAVE WALL STOP DR 1550

CONCEALED MOUNTING NON-MARKING RUBBER BUMPER. FOR USE WITH KNOB OR LEVER WITH TURN BUTTON.

CONVEX WALL STOP CONCEALED MOUNTING

DR 1560

NON-MARKING RUBBER BUMPER. FOR USE WITH KNOB, LEVER OR PULL HANDLES.

DOME STOP DR 1570

(RAISED HEIGHT)

FOR DOORS WITH THRESHOLD OR WITH UNDERCUT.

DOME STOP DR 1580

FOR DOORS WITHOUT THRESHOLD OR MINIMAL UNDERCUT.

WALL STOP DR 1590

(LOW HEIGHT)

(HEAVY DUTY)

NON-MARKING RUBBER BUMPER

FLOOR STOP DR 1600

FOR DOORS UNDERCUT UP TO 2 1/2" (64mm) NON-MARKING RUBBER BUMPER

FLOOR STOP DR 1610

(HEAVY DUTY)

FOR DOORS UNDERCUT UP TO 1 1/4" (38 mm) NON-MARKING RUBBER BUMPER

FLOOR STOP DR 1620

(HEAVY DUTY)

(HEAVY DUTY)

FOR DOORS UNDERCUT UP TO 2" (51 mm) NON-MARKING RUBBER BUMPER

PAGE 56

HARDWARE PART NUMBER

DESCRIPTION WALL STOP

DR 1630

ILLUSTRATION

(HEAVY DUTY)

NON-MARKING RUBBER BUMPER

KICK-DOWN DOOR STOP DR 1640

NON-MARKING RUBBER BUMPER

PEEL & STICK WALL BUMPER FR 220 D

EASY PEEL & STICK APPLICATION SUPERIOR ABRASION RESISTANCE, CRACK RESISTANT AND RESILIENT. NON STAINING AND NON MARRING. AVAILABLE IN CLEAR AND BLACK

MULLION REGULAR MULLION (NON FIRE) SIZE: 2" X 3" AVAILABLE IN 7', 8' AND 10'

MG 950

MATERIAL: ALUMINUM WITH SCREWS, TOP AND BOTTOM BRACKETS

FIRE RATED MULLION SIZE: 2" X 3" AVAILABLE IN 7' AND 8'

MG 950 F

MATERIAL: STEEL TUBING FINISH: PRIME COAT WITH SCREWS, TOP AND BOTTOM BRACKETS FIRE RATED FOR 3 HRS

MULLION (NON FIRE) SIZE: 2" X 3" AVAILABLE IN 7', 8' AND 10'

MG 950 S

MATERIAL: STEEL TUBING FINISH: PRIME COAT ALSO AVAILABLE IN STAINLESS STEEL WITH SCREWS, TOP AND BOTTOM BRACKETS

PAGE 57

HARDWARE PART NUMBER

DESCRIPTION

ILLUSTRATION

WALL BASEBOARD STOP NON-MARKING RUBBER BUMPER

DR 1800

TOP CENTER HUNG PIVOT (JAMB PORTION)

DR 1810

DOUBLE OR SINGLE ACTION ADJUSTABLE WALKING BEAM WITH COVER

BOTTOM CENTER HUNG PIVOT ARM (DOOR PORTION) DR 1820

DOUBLE OR SINGLE ACTION

8" SURFACE BOLT FIRE RATED (HEAVY DUTY)

DR 1830

COMES WITH TOP & BOTTOM STRIKES AND CONCEALED COMBINATION SCREWS. SEX BOLTS AVAILABLE UPON REQUEST. FINISHES: 32D, 26D, 26, 10B, 10, 5, 4, 3

DARE TO COMPARE... OUR PRICING TO OUR COMPETITORS. YOU WILL SEE TREMENDOUS COST SAVINGS!

12" SURFACE BOLT

(HEAVY DUTY)

COMES WITH TOP STRIKE AND CONCEALED COMBINATION SCREWS.

DR 1840

BOTTOM STRIKE AND SEX BOLTS AVAILABLE UPON REQUEST. FINISHES: 32D, 26, 10B, 10, 5, 4, 3

DARE TO COMPARE... OUR PRICING TO OUR COMPETITORS. YOU WILL SEE TREMENDOUS COST SAVINGS!

PAGE 58

HARDWARE PART NUMBER

DESCRIPTION

ILLUSTRATION

18", 24", 36" OR 60" SURFACE BOLT DR 1850

(HEAVY DUTY) SPECIFY LENGTH WHEN ORDERING. COMES WITH TOP STRIKE AND CONCEALED COMBINATION SCREWS. BOTTOM STRIKE AND SEX BOLTS AVAILABLE UPON REQUEST. FINISHES AVAILABLE: 32D, 26, 10B, 10, 5, 4, 3

DARE TO COMPARE... OUR PRICING TO OUR COMPETITORS. YOU WILL SEE TREMENDOUS COST SAVINGS!

PULL PLATE 4" X 16" WITH 5 1/2" CENTERS ON PULL 2" PROJECTION FINISHES AVAILABLE: 32D, 27, 26D, 26, 10B, 10, 5, 4, 3

DR 1860

DOOR PULL 5 1/2" CENTERS FINISHES AVAILABLE: 32D, 27, 26D, 26, 10B, 10, 5, 4, 3

DR 1870

DOOR PULL 7" CENTERS FINISHES AVAILABLE: 32D, 27, 26D, 26, 10B, 10, 5, 4, 3

DR 1880

DOOR PULL 9" CENTERS FINISHES AVAILABLE: 32D, 27, 26D, 26, 10B, 10, 5, 4, 3

DR 1890

PAGE 59

HARDWARE PART NUMBER

DESCRIPTION

ILLUSTRATION

KICKPLATE (.050) ALL SIZES AVAILABLE

DR 1900

AVAILABLE IN ANODIZED ALUMINUM (PVC COATED), 304 STAINLESS STEEL (PVC COATED), SOLID ARCHITECTURAL GRADE BRASS AND BRONZE (POLISHED TO ANY FINISH)...ELECTROSTATICALLY POWDER COATED.

PUSHPLATE (.050) ALL SIZES AVAILABLE

DR 1910

AVAILABLE IN ANODIZED ALUMINUM (PVC COATED), 304 STAINLESS STEEL (PVC COATED), SOLID ARCHITECTURAL GRADE BRASS AND BRONZE (POLISHED TO ANY FINISH)...ELECTROSTATICALLY POWDER COATED.

DECORATIVE DOOR PULL 7" CENTERS

DR 1920

AVAILABLE IN ALL ARCHITECTURAL FINISHES CRAFTED FROM SOLID BRASS OR ALUMINUM FURNISHED WITH SCREWS AND WASHERS.

PULL PLATE PLATE: 3 1/2" X 16" X 16GA PULL: 7" CENTERS

DR 1930

AVAILABLE IN ANODIZED ALUMINUM (PVC COATED), 304 STAINLESS STEEL (PVC COATED), SOLID ARCHITECTURAL GRADE BRASS AND BRONZE (POLISHED TO ANY FINISH)...ELECTROSTATICALLY POWDER COATED.

HEAVY DUTY PULL PLATE PLATE: 2 1/2" X 16" X 1/8" PULL: 7" CENTERS

DR 1940

AVAILABLE IN ANODIZED ALUMINUM (PVC COATED), 304 STAINLESS STEEL (PVC COATED), SOLID ARCHITECTURAL GRADE BRASS AND BRONZE (POLISHED TO ANY FINISH)...ELECTROSTATICALLY POWDER COATED.

PAGE 60

PULLS & PULL PLATES PART NUMBER

DR 1875

DESCRIPTION PROD NO.

PROJ. C TO C OVERALL “A” “B” LENGTH

1875-6 1876-8 1875-10

2 1/4" 2 1/4" 2 1/4"

DR 187PP

PROJ. C TO C OVERALL “A” “B” LENGTH

1885-8 2 1/2" 1886-10 2 1/2" 1885-12 2 1/2"

3, 10, 10B, 26, 26D, 27/28, 32D

8" 10" 12"

9" 11" 13"

FINISHES

3, 10, 10B, 26, 26D, 27/28, 32D

DOOR PULLS ARE MADE FROM THE FINEST ARCHITECTURAL BRASS, BRONZE, STAINLESS STEEL, AND ALUMINUM

PROD NO.

DR 1895

6 3/4" 8 3/4" 10 3/4"

FINISHES

DOOR PULLS ARE MADE FROM THE FINEST ARCHITECTURAL BRASS, BRONZE, STAINLESS STEEL, AND ALUMINUM

PROD NO.

DR 1885

6" 8" 10"

ILLUSTRATION

1895-6 1896-8 1895-10

PROJ. C TO C OVERALL “A” “B” LENGTH 2" 2" 2"

6" 8" 10"

6 1/2" 8 1/2" 10 1/2"

FINISHES

3, 10, 10B, 26, 26D, 27/28, 32D

DOOR PULLS ARE MADE FROM THE FINEST ARCHITECTURAL BRASS, BRONZE, STAINLESS STEEL, AND ALUMINUM. ALSO AVAILABLE IN 7" AND 9" C TO C.

PROD NO.

PLATE SIZE

187PP-1 187PP-2 187PP-3 187PP-4 187PP-5 187PP-6 187PP-7 187PP-8 187PP-9

3 1/2" X 15" 4" X 16" 6" X 16" 3 1/2" X 15" 4" X 16" 6 X 16" 3 1/2" X 15" 4" X 16" 6" x 16"

PULL C TO C 6" 6" 6" 8" 8" 8" 10" 10" 10"

FINISHES

3, 10, 10B, 26, 26D, 27/28, 32D

NOTE: PULLS ARE CENTERED ON PLATES UP TO 4" WIDE. HOWEVER, THEY ARE OFFSET 2" FROM THE EDGE ON PLATES WIDER THAN 4".

DR 188PP

PROD NO.

PLATE SIZE

188PP-1 188PP-2 188PP-3 188PP-4 188PP-5 188PP-6

3 1/2" X 15" 4" X 16" 6" X 16" 3 1/2" X 15" 4" X 16" 6 X 16"

PULL C TO C 8" 8" 8" 10" 10" 10"

FINISHES

3, 10, 10B, 26, 26D, 27/28, 32D

NOTE: PULLS ARE CENTERED ON PLATES UP TO 4" WIDE. HOWEVER, THEY ARE OFFSET 2" FROM THE EDGE ON PLATES WIDER THAN 4".

PAGE 61

PULLS & PULL PLATES PART NUMBER

DR 389PP

DESCRIPTION PROD NO.

PLATE SIZE

389PP-1 389PP-2 389PP-3 389PP-4 389PP-5 389PP-6 389PP-7 389PP-8 389PP-9

3 1/2" X 15" 4" X 16" 6" X 16" 3 1/2" X 15" 4" X 16" 6 X 16" 3 1/2" X 15" 4" X 16" 6" x 16"

PULL C TO C 6" 6" 6" 8" 8" 8" 10" 10" 10"

ILLUSTRATION FINSIHES

3, 10, 10B, 26, 26D, 27/28, 32D

NOTE: PULLS ARE CENTERED ON PLATES UP TO 4" WIDE. HOWEVER, THEY ARE OFFSET 2" FROM THE EDGE ON PLATES WIDER THAN 4".

DOOR HOLDERS FOR A COMPLETE AND FULL LINE OF DOOR HOLDERS, PLEASE CONTACT US.

DOOR CLOSERS

PAGE 62

STANDARD WEIGHT FULL MORTISE STEEL HINGE

GBB79 2 Ball Bearing, 5 Knuckle design Template hinge For use on medium weight doors or doors requiring average frequency service Button tip and plug Optional non-rising removable pin All sizes packed 3 per box with screws (48/case), regularly furnished with Phillips flat head screws

Steel with steel pin 5” x 4” (127 x 101mm)

Gauge of metal

4-1/2” x 4” (114 x 101mm)

5” x 4-1/2” (127 x 114mm)

4” x 4” (101 x 101mm)

4-1/2” x 4-1/2” (114 x 114mm)

5” x 5” (127 x 127mm)

0.129”(3.3mm)

0.134”(3.4mm)

0.145”(3.7mm)

Number of holes

8

Machine screw size

1/2 x 12-24

Wood screw size

1-1/4 x 12 Average weight/pair

Stainless Steel

1.8lbs.(0.8kg)

2.3lbs.(1kg)

3.1lbs.(1.4kg)

Brass

1.9lbs.(0.9kg)

2.5lbs.(1.1kg)

3.2lbs.(1.5kg)

STANDARD WEIGHT FULL MORTISE STAINLESS STEEL HINGE

GBB91 2 Ball Bearing, 5 Knuckle design Template hinge For use on medium weight doors or doors requiring average frequency service Button tip and plug Optional non-rising removable pin All sizes packed 3 per box with screws (48/case), regularly furnished with Phillips flat head screws

Stainless steel with stainless steel pin 5” x 4” (127 x 101mm)

Gauge of metal

4-1/2” x 4” (114 x 101mm)

5” x 4-1/2” (127 x 114mm)

4” x 4” (101 x 101mm)

4-1/2” x 4-1/2” (114 x 114mm)

5” x 5” (127 x 127mm)

0.129”(3.3mm)

0.134”(3.4mm)

0.145”(3.7mm)

Number of holes

8

Machine screw size

1/2 x 12-24

Wood screw size

1-1/4 x 12 Average weight/pair

Stainless Steel

1.8lbs.(0.8kg)

2.3lbs.(1kg)

3.1lbs.(1.4kg)

Brass

1.9lbs.(0.9kg)

2.5lbs.(1.1kg)

3.2lbs.(1.5kg)

PAGE 63

HEAVY WEIGHT FULL MORTISE STEEL HINGE

GBB68 4 Ball Bearing, 5 Knuckle design Template hinge For use on heavy doors or doors requiring high frequency service Button tip and plug Optional non-rising removable pin All sizes packed 3 per box with screws (48/case), regularly furnished with Phillips flat head screws

Steel with steel pin 5” x 4” (127 x 101mm) 4-1/2” x 4” (114 x 101mm)

5” x 4-1/2” (127 x 114mm)

4-1/2” x 4-1/2” (114 x 114mm)

5” x 5” (127 x 127mm)

Gauge of metal

0.180”(4.6mm)

0.190”(4.8mm)

Number of holes

8

Machine screw size

1/2 x 12-24

Wood screw size

1-1/4 x 12 Average weight/pair

Stainless Steel

2.7lbs.(1.2kg)

3.6lbs.(1.6kg)

Brass

2.8lbs.(1.3kg)

3.8lbs.(1.7kg)

HEAVY WEIGHT FULL MORTISE STAINLESS STEEL HINGE

GBB99 4 Ball Bearing, 5 Knuckle design Template hinge For use on heavy doors or doors requiring high frequency service Button tip and plug Optional non-rising removable pin All sizes packed 3 per box with screws (48/case), regularly furnished with Phillips flat head screws

Stainless steel with stainless steel pin 5” x 4” (127 x 101mm)

Gauge of metal

4-1/2” x 4” (114 x 101mm)

5” x 4-1/2” (127 x 114mm)

4-1/2” x 4-1/2” (114 x 114mm)

5” x 5” (127 x 127mm)

0.180”(4.6mm)

0.190”(4.8mm)

Number of holes

8

Machine screw size

1/2 x 12-24

Wood screw size

1-1/4 x 12 Average weight/pair

Stainless Steel

2.7lbs.(1.2kg)

3.6lbs.(1.6kg)

Brass

2.8lbs.(1.3kg)

3.8lbs.(1.7kg)

PAGE 64

FULL MORTISE SPRING HINGE SERIES

G50

doors require Ball Bearing hinges. For nonlabeled doors 4’0”(1220mm) wide, 4” x 4” (101 x 101mm) Spring hinges are not recommended. For non-labeled doors over 7’6” (2250mm) in height, use an additional hinge for each additional 30”(750mm) of height or fraction thereof.

3 Knuckle design Template hinge For Automatic closing of doors. Meets codes for hotels, motels, institutions and commercial buildings Adjustable Tension, adjusting tool included Standard screw packaging on sizes 4-1/2” x 4” (114 x 101mm) and 4-1/2” x 4-1/2” (114 x 114mm) is all machine and 1/2 wood.

Machine screws for 4” x 4” (101 x 101mm) hinges packed upon request - specify size and application.

Notes: 1. For maximum versatility, use all spring hinges or a combination of spring hinges and ball bearing hinges.

Do not use plain bearing hinges.

2. Full spring tension may not be required on all hinges.

Maximum door size: For labeled doors 3’ x 7’(914 x 2134mm), the maximum door size is based on the limits set forth by NFPA Standard #80. Labeled

SERIES

G50

SPRING HINGE

BUTT HINGE

For Use on 1-3/4” Door 60 85

1 2

2 1

110 70 115

3 1 2

0 2 1

150

3

0

SIZE

RECOMMENDED MAX DOOR WEIGHT (lbs.)

4” x 4” (101 x 101mm) 4-1/2” x 4” (114 x 101mm)

G50

4-1/2” x 4-1/2” (114 x 114mm)

Gauge of metal

4” x 4” (101 x 101mm)

4-1/2” x 4” (114 x 101mm)

4-1/2” x 4-1/2” (114 x 114mm)

0.109”(2.8mm)

0.134”(3.4mm)

0.134”(3.4mm)

Number of holes

8

Machine screw size

1/2 x 12-24

Wood screw size

3/4 x 10

Pair in a case.

Average weight/pair

1.02lbs.(0.4kg)

GCB80

1-1/4 x 12 1.04lbs.(0.5kg)

1.10lbs.(0.5kg)

FULL MORTISE CONCEALED BEARING HINGE

Template hinge Concealed bearing for aesthetic design applications 4-1/2” x 4-1/2” With or without NRP

OTHER PROFILES & HINGES

AVAILABLE

PAGE 65

AVAILABLE IN STEEL, STAINLESS STEEL (32D), BRIGHT BRASS (3), BRONZE (10) AND OIL RUBBED BRONZE (10B)

DOOR SAVERS K1 MODEL: 9” High

For cylindrical locksets 2-1/8” bore, 2-3/8” and 2-3/4” backsets

K2 MODEL: 9” High

For cylindrical locksets and deadbolts: 1-1/2” top bore, 2-1/8” bottom bore, 2-3/8” and 2-3/4” backsets

MODEL NO.

BACKSETS

DOOR THICKNESS

MODEL NO.

BACKSETS

DOOR THICKNESS

K 188

2-3/8”

1-3/8”

K 288

2-3/8”

1-3/8”

K 184

2-3/8”

1-3/4”

K 284

2-3/8”

1-3/4”

K 148

2-3/4”

1-3/8”

K 248

2-3/4”

1-3/8”

K 144

2-3/4”

1-3/4”

K 244

2-3/4”

1-3/4”

K5 144

5”

SPECIFY

K5 244

5”

SPECIFY

K3 MODEL: 9” High

For cylindrical locksets and deadbolts: 2-1/8” top and bottom bore, 2-3/8” and 2-3/4” backsets

K4 MODEL: 4-1/2” High For cylindrical locksets or deadbolts: 1-1/2” bore, 2-3/8” and 2-3/4” backsets

MODEL NO.

BACKSETS

DOOR THICKNESS

MODEL NO.

BACKSETS

DOOR THICKNESS

K 388

2-3/8”

1-3/8”

K 488

2-3/8”

1-3/8”

K 384

2-3/8”

1-3/4”

K 484

2-3/8”

1-3/4”

K 348

2-3/4”

1-3/8”

K 448

2-3/4”

1-3/8”

K 344

2-3/4”

1-3/4”

K 444

2-3/4”

1-3/4”

K5 344

5”

SPECIFY

K5 444

5”

SPECIFY

K5 MODEL: 4-1/2” High For cylindrical locksets or deadbolts: 2-1/8” bore, 2-3/8” and 2-3/4” backsets MODEL NO.

BACKSETS

DOOR THICKNESS

K 588

2-3/8”

1-3/8”

K 584

2-3/8”

1-3/4”

K 548

2-3/4”

1-3/8”

K 544

2-3/4”

1-3/4”

K5 544

5”

SPECIFY

K7 MODEL: 4-1/2” High Blank Door Guard

MODEL NO.

BACKSETS

DOOR THICKNESS

K 708

N/A

1-3/8”

K 704

N/A

1-3/4”

K6 MODEL: 9” High Blank Door Guard

MODEL NO.

BACKSETS

DOOR THICKNESS

K 608

N/A

1-3/8”

K 604

N/A

1-3/4”

K8 MODEL: 12” High

For special cylindrical locksets and deadbolts: 1-1/2” top bore, 2-1/8” bottom bore, 2-3/4” backset only MODEL NO.

BACKSETS

DOOR THICKNESS

K 858

2-3/4”

1-3/8”

K 878

2-3/4”

1-3/4”

K5 878

5”

SPECIFY

PAGE 66

DOOR SAVERS

AVAILABLE IN STEEL, STAINLESS STEEL (32D), BRIGHT BRASS (3), BRONZE (10) AND OIL RUBBED BRONZE (10B)

DK1 MODEL

LK1 MODEL

6” or 9” HIGH 4-3/4” WIDE 2-1/8” BORE 2-3/4” BACKSET

6” or 9” HIGH 4-3/4” WIDE 2-1/8” BORE 2-3/4” BACKSET To Suit: Best 93K Lever Lock 73K Locksets Sargeant 6500 Series Marks 170, 190, 195 Series

F - SERIES

O - SERIES

Any door saver in this catalogue can be ordered with a square latch cut-out (No indentation).

When such a cut-out is required, please place the letter “F” before the door saver model number, when ordering.

Any door saver in this catalogue can be ordered with a circular cut-out (No indentation).

When such a cut-out is required, please place the letter “O” before the door saver model number, when ordering.

V - SERIES

W - SERIES

Any door saver in this catalogue can be ordered with a D shaped cut-out (No indentation).

When such a cut-out is required, please place the letter “V” before the door saver model number, when ordering.

Any door saver in this catalogue can be ordered to fit doors from thickness of 1-3/8” to 4”.

How to order: For example, ordering K144 in 32D finish for 2” thick door, the order should read “W2 K144 32D”

PAGE 67

DOOR SAVERS

AVAILABLE IN STEEL, STAINLESS STEEL (32D), BRIGHT BRASS (3), BRONZE (10) AND OIL RUBBED BRONZE (10B)

K550 MODEL

K559 MODEL

12” HIGH 6-3/4” WIDE 5” BACKSET 6” CENTER LINES FOR 1-3/4” DOOR

9” HIGH 6-1/2” WIDE 5” BACKSET 4” CENTER LINES FOR 1-3/4” DOOR

KF86 MODEL

KF86SC MODEL

Mortise lock with function cut-out 2-3/4” BACKSET FOR 1-3/4” DOOR Other models available

12” HIGH 5” WIDE FOR 1-3/4” DOOR 86 cut-out with full Escutcheon trim cut-outs

K86NTP MODEL

K86H MODEL

Mortise lock door saver NO TABS 9” HIGH FOR 1-3/4” DOOR

12” HIGH 4” WIDE 1-1/2” BACKSET FOR 1-3/4” DOOR

K86TP MODEL Mortise lock door saver WITH TABS 9” HIGH FOR 1-3/4” DOOR

PAGE 68

DOOR SAVERS

AVAILABLE IN STEEL, STAINLESS STEEL (32D), BRIGHT BRASS (3), BRONZE (10) AND OIL RUBBED BRONZE (10B)

K88H MODEL

K89H MODEL

9” HIGH 6-1/2” WIDE 5” BACKSET 4” CENTER LINES FOR 1-3/4” DOOR

15” HIGH 5-1/4” WIDE 2-3/4” BACKSET 6” CENTER LINES FOR 1-3/4” DOOR

K93KV MODEL

K900 MODEL

13” HIGH 4-1/2” WIDE 2-3/4” BACKSET FOR 1-3/4” DOOR

16”, 18”, 20” or 24” HIGH* 4-1/2” WIDE 4”, 5” or 6” CENTER LINES* FOR 1-3/4” AND 1-3/8” DOORS * Specify when ordering

K126 MODEL 12” HIGH 4-1/4” WIDE 6” CENTER LINES FOR 1-3/4” DOOR

CUSTOM

DOOR SAVERS Being a company defined by cutting edge technology, we are able to offer you unmatched selection and service that others can only talk about. In terms of door savers, this means we can build you virtually any size, profile and kind of door saver you wish. We can TRULY satisfy any of your door saver needs!

PAGE 69

DOOR SAVERS

AVAILABLE IN STEEL, STAINLESS STEEL (32D), BRIGHT BRASS (3), BRONZE (10) AND OIL RUBBED BRONZE (10B)

K905 MODEL

K905X MODEL

9” or 15” HIGH 5” WIDE 2-3/4” BACKSET 6” CENTER LINES FOR 1-3/4” DOOR

9” or 14” HIGH 5” WIDE FOR 1-3/4” DOOR Convert The Following To Key-In-Knob Lock: Simplex 1000 Alarm Lock DL2500 Series

Also Fits: Simplex 1000 Alarm Lock DL2500 Series

K CHORO MODEL

K1 CHORO MODEL

6” HIGH, 4-1/4” WIDE, 2-3/4” BACKSET FOR 1-3/4” DOOR One side blank

9” or 12” HIGH, 4-1/2” WIDE, 2-3/4” BACKSET Other sizes available

KM84 MODEL 4-1/2” HIGH, 7” WIDE, 5” BACKSET FOR 1-3/4” DOOR

K77B MODEL 9” to 83” HIGH* 2” to 8” WIDE* FOR 1-3/4” DOOR * Specify when ordering

PAGE 70

AVAILABLE IN STEEL, STAINLESS STEEL (32D), BRIGHT BRASS (3), BRONZE (10) AND OIL RUBBED BRONZE (10B)

DOOR SAVERS

KZ HEAVY DUTY MODEL 6” HIGH 4-3/4” WIDE FOR 1-3/4” DOOR Works With: Falcon T Series Corbin Russwin 800 Sargeant 10-Line Yale Augusta Arrow Sierra Schlage Rhodes Lori Retrofit Kit

How to Order

KR100 MODEL 4” HIGH 1” WIDE FOR 1-3/4” AND 1-3/8” DOORS Specify when ordering A unique reinforcer for Deadbolts and Cylindrical Locks.

CUSTOM DOOR SAVERS

You must specify the following when order: Exact Height

Thickness of the door

Series Type

Exact Width

Backset of Bore(s)

Number of Pieces

Exact Bore Size(s)

Type of Material / Finish

Premium Products...

First-class Packaging...

Unbeatable Prices !

PAGE 71

LATCH PROTECTORS DR385 For use on Cylindrical or Mortise Lockset Heavy duty 12 gauge steel Jamb pin prevents prying of door Furnished with Carriage Bolts & Capnuts SIZE: 3” X 11” REVERSIBLE

DR385A For use on Cylindrical Lockset Pre-Punched for ease of installation Heavy duty 12 gauge steel Jamb pin prevents prying of door Furnished with Carriage Bolts & Capnuts SIZE: 3” X 11” REVERSIBLE

DR385AL For use on Cylindrical Lockset For 3-1/2” Rose Pre-Punched for ease of installation Heavy duty 12 gauge steel Jamb pin prevents prying of door Furnished with Carriage Bolts & Capnuts SIZE: 3” X 11” REVERSIBLE

AVAILABLE IN ZINC PLATED, STAINLESS STEEL (32D), DURONAUTIC, OIL RUBBED BRONZE (10B), AND BRIGHT BRASS (3) DR386 For use on Aluminum entrance doors Heavy duty 12 gauge steel 1-1/2” hole to suit mortise cylinder Furnished with Carriage Bolts & Capnuts SIZE: 2-5/8” X 12” REVERSIBLE

DR387 For use on Cylindrical Lockset Pre-Punched to fit around rose Made to suit narrow style door frames Heavy duty 12 gauge steel Furnished with Carriage Bolts & Capnuts SIZE: 2-5/8” X 6” REVERSIBLE

DR388 For use on doors not flush with frame face 3/8” offset Furnished with Carriage Bolts & Capnuts SIZE: 1-7/8” X 14”

DR388A For use on doors not flush with frame face 1/2” offset Furnished with Carriage Bolts & Capnuts SIZE: 1-7/8” X 14” REVERSIBLE

PAGE 72

LATCH PROTECTORS

AVAILABLE IN ZINC PLATED, STAINLESS STEEL (32D), DURONAUTIC, OIL RUBBED BRONZE (10B), AND BRIGHT BRASS (3)

DR389 For use on Cylindrical Lock preparation Heavy duty 12 gauge steel Furnished with Carriage Bolts & Capnuts SIZE: 1-1/2” X 6”

DR393 REVERSIBLE

DR390 For use on Mortise Lock preparation Made to suit Rose or Escutcheon, 3-1/2” wide or less REVERSIBLE Heavy duty 12 gauge steel Furnished with Carriage Bolts & Capnuts SIZE: 1-1/2” X 10”

Cylinder Pull for use on Deadlock Cylinders Heavy duty 12 gauge steel Eliminates need for separate pull Installs easily under Cylinder Rose, 1-1/4” hole SIZE: 6-3/4” X 3-1/2”

DR393A Cylinder Pull for use on Deadlock Cylinders Heavy duty 12 gauge steel Eliminates need for separate pull Pull when dogged Installs easily under Cylinder Rose, 1-1/2” hole SIZE: 6-3/4” X 3-1/2”

DR394 Cylinder Pull for use on Deadlock Cylinders Eliminates need for separate pull Installs easily under Cylinder Rose, 1-1/4” hole

DR394A

DR391 For In-Swinging door, 6” high for Cylindrical Lockset Made to resist jimmying & prying or use of credit card Comes with one way screws

DR391A For In-Swinging door, 12” high for Mortise Lockset Made to resist jimmying & prying or use of credit card Comes with one way screws

Cylinder Pull for use on Deadlock Cylinders Eliminates need for separate pull Installs easily under Cylinder Rose, 1-1/2” hole

DR395 For use on Cylindrical Lockset Heavy duty 12 gauge steel Furnished with Carriage Bolts & Capnuts SIZE: 6-1/4” X 7” REVERSIBLE

PAGE 73

THERMAL BREAK DR542 THERMAL BREAK JOINER FOR PRESSED STEEL FRAMES

10’ LONG Rigid vinyl material joiner & wedge supplied as one piece assembly.

Available in Black only.

NOTES

PAGE 74 Copyright © 2012 Gulfport Industries Inc., All Rights Reserved.

THRESHOLDS, SWEEPS & WEATHERSTRIPPING MK105

MK145 Extruded Aluminum

Extruded Aluminum Vinyl Insert

MK115 Extruded Aluminum Vinyl Insert

MK125 Extruded Aluminum

MK135 Extruded Aluminum

MK155 Extruded Aluminum

MK165 Extruded Aluminum

MK175 Extruded Aluminum Vinyl Insert

PAGE 75

THRESHOLDS, SWEEPS & WEATHERSTRIPPING MK185 Extruded Aluminum Vinyl Insert

MK195 Extruded Aluminum Vinyl Insert

MK205 Extruded Aluminum

MK215 Extruded Aluminum

MK225 Extruded Aluminum Vinyl Insert

MK235 Extruded Aluminum Vinyl Insert

MK245 Extruded Aluminum Vinyl Insert

MK255 Extruded Aluminum Vinyl Insert

PAGE 76

THRESHOLDS, SWEEPS & WEATHERSTRIPPING MK265 Extruded Aluminum Vinyl Insert

MK275 Handicap Thresholds Extruded Aluminum

MK285 Frost Barrier Thresholds Extruded Aluminum

MK285A Frost Barrier Thresholds Extruded Aluminum Vinyl Insert

MK295 Extruded Aluminum Vinyl Insert

MK305 Extruded Aluminum Vinyl Insert

MK315 Adjustable Thresholds Extruded Aluminum

MK325 Adjustable Thresholds Extruded Aluminum

PAGE 77

THRESHOLDS, SWEEPS & WEATHERSTRIPPING MK335 Weatherstrip Extruded Aluminum Vinyl Insert

MK345 Weatherstrip Extruded Aluminum Vinyl Insert

MK355 Weatherstrip Extruded Aluminum Black Sponge Neoprene

MK365 Door Sweep Clear Anodized Extruded Aluminum Black Solid Neoprene

MK375 Weatherstrip Clear Anodized Extruded Aluminum Black Sponge Neoprene

MK385 Raincap Extruded Aluminum

MK395 Raincap Extruded Aluminum

MK405 Adjustable Door Bottom Neoprene Available in White, Cream and Brown

PAGE 78

THRESHOLDS, SWEEPS & WEATHERSTRIPPING MK415 Stainless Steel Thresholds

MK425

MK455 Ideal for sealing large gaps and uneven surface.

Available in Anodized Aluminum, other finishes available.

MK465

Stainless Steel Thresholds

MK435

MK475

Adjustable Door Bottom Nylon Brush Available in Anodized Aluminum, other finishes available.

MK445

MK485

Resists Ozone, sunlight, rain and oxyen aging.

Available in Anodized Aluminum, other finishes available.

PAGE 79

THRESHOLDS, SWEEPS & WEATHERSTRIPPING MK495

MK535

MK575

MK505

MK545

MK585

MK515

MK555

MK595

MK525

MK565

MK605

PAGE 80

THRESHOLDS, SWEEPS & WEATHERSTRIPPING MK615

MK655

MK695

MK625

MK665

MK705

MK635

MK675

MK715

MK645

MK685

MK725

PAGE 81

THRESHOLDS, SWEEPS & WEATHERSTRIPPING MK735

MK765

MK745

MK775

MK755

MK785

NOTES

PAGE 82 Copyright © 2012 Gulfport Industries Inc., All Rights Reserved.

IDEAL SELLING TOOL FOR ANY SHOWROOM

THE LEAST EXPENSIVE SALESMAN IN YOUR COMPANY!

Tel: Fax: Web site: e-mail:

1•800•263•0808 1•800•663•3800 www.gulfport-corp.com info@gulfport-corp.com Shandi@gulfport-corp.com

SHANDI JOHNSON, SALES REP

Distributed by

GULFPORT CATALOG 2012