GPD EXPORT CATALOG

BATHROOM & KITCHEN

ARMATURES INDUSTRIAL PRODUCTS PLASTIC PRODUCTS ARBEKA ARMATURES

CATALOGUE

Since 1962 being in the life of

in Istanbul-Beylikduzu, on an area of

manufacturing Gul Pres Dokum Sanayi

12.000 m2 which has a closed area of

AS. with the brand name known as

3.000 m2 and also has a contact and

GPD has been established in the year

sales office in the same area location,

1978 has a deep rooted and significant place throughout the domestic and foreign markets for the production of various bathroom and kitchen armatures,taps and water,gas,radiator

Beylikdüzü. Our company that owns the certificate of TS ISO 9001:2008 that is under the confirmation of TUV, continues the production in paralel of

valves and unions produced with

Quality Guarantee System conditions.

brass raw materials with hot pressing

The primary goals of our team are

and die casting.GPD manufactures all

Total Quality, Customer Satisfaction

products in it’s own building located

and Modern Enterprising.

INDEX Power of Design Aduro Quadro GPDAntik Fuego Provido Tauro Frezia

Modern Lives Nova Ritmo Fonte Felis Tigra Tulio Atros

cold start CARTRIDGE

cold start CARTRIDGE

Practical Solutions Kalipso Flamengo Espina Solus Iris Eko Adrio

02-37 02-07 08-13 14-17 18-21 22-27 28-33 34-37 38-75 38-43 44-47 48-53 54-58 60-63 64-67 68-75 76-149 76-83 84-91 92-99 100-105 106-109 110-117 118-125

Nino Koc Topuz

126-131 132-139 140-149

Advanced Water Techs.

150-163 150-153

Thermostatic Photocell and Time Controlled Armatures Doctor/Physically Disabled

154-159 160-163

New Embedded Bathroom & Shower Armatures

164-173

WATER THERAPY Shower Sets Shower Heads Shower Panels

174-191 174-184 185-187 188-189

Supplementary Products Industrial Products Plastic Products ARBEKA Armatures Warranty Conditions

190-195 196-207 208-231 232-242 243

ADURO POWER OF DESIGN

CATALOGUE

2

CATALOGUE

3

ADURO Product Code & Name MTA95

Fully Embedded Bathroom Armature

Surface Chrome Features

• Outlet with natural flow • Can be used both with embedded shower heads and hand showers • Lenght of outlet is 140 mm • Measurement of outlet connection ¾” • Installation under plaster • Ideal working pressure 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended

Cartridge Diameter: Ø40

Product Code & Name MAB95

Embedded Bathroom Armature

Surface Chrome Features

• Special aerator with water saving (Bubble flow, with lime breaker, Flow rate: 16 lt/min) • Compatible with all embedded shower heads and with all handsets by using GGR04.

• Length of outlet is 210 mm • Installation under plaster • Wall outlet spiral hose union size is ½” • Ideal operation pressure is 3 - 4 Bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

Cartridge Diameter: Ø40

Product Code & Name MKB95

Embedded Cabin Armature

Surface Chrome Features

• Compatible with all embedded shower heads and with all handsets • Shower outlet length is 17.5 mm • Wall outlet shower size is ½” • Wall outlet spiral hose union size is ½” • Installation under plaster - Ideal operation pressure is 3 - 4 Bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

Cartridge Diameter: Ø40

CATALOGUE

4

Water Saving

Product Code & Name MAD95

22

G1/2"

Embedded Shower Armature

Surface Chrome Features 950

• Connection diemension ½” (inlet-outlet) • Compatible with all embedded shower heads and with all handsets by using GGR04 • Installation under plaster • Ideal working pressure 3-4 Bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

Cartridge Diameter: Ø35

Product Code & Name MBB95 Bathroom Armature

Ø60

Surface Chrome Features

• Special aerator with water saving (Bubble flow, with lime breaker, Flow rate: 16 lt/min) • Special outlet tip design with 180° rotation • Shower alignment with outlet brought in parallel with the wall surface • Aerator shower alignment with outlet brought in perpendicular with the wall surface • Length of outlet is 185 mm - Armature connection size is ¾” • Eccentric connection threads sizes are ¾” - ½” • Spiral hose connection threads sizes are ½” • Ideal operation pressure is 3 - 4 Bar • To prevent any damage which can be caused by the

G1/2" 60

140-160

G1/2"

125

contaminants inside the fittings, a filter at the entrance of the flat is recommended

Su çıkışını duş konumuna getirmek için çıkış ucunu ok yönünde çeviriniz.

MBB 95 ADURO BANYO BATARYASI

Cartridge Diameter: Ø35

Ø60

Product Code & Name G1/2"

MDB95

Shower Armature

60

140-160

G1/2"

Surface Chrome Features

• Shower outlet length is 60 mm • Armature connection size is ¾” • Eccentric connection threads sizes are ¾” - ½” • Spiral hose connection threads sizes are ½” • Ideal operation pressure is 3 - 4 Bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

Cartridge Diameter: Ø35 MDB 95 ADURO DUŞ BATARYASI

CATALOGUE

5

ADURO Product Code & Name MAK95

HAND SHOWER

Embedded Bathtub Armature OUTLET

Surface Chrome COLD WATER TAP

HOT WATER TAP

DIVERTOR

Features

• Special water saving aerator (Bubble flow, with lime breaker, Flow rate: 16 lt/min) • 90° ceramic stemmer • Diverting unit to hand set and outlet is on the outlet • Length of outlet is 160mm • Height of outlet is 160mm • Spiral hose with double clamp is 1800mm • Ideal operation pressure is 3 - 4 Bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

Product Code & Name MLB95 Wash-Basin Armature

Surface Chrome 155

Features

115

• Special water saving aerator (Bubble flow, with lime breaker, Flow rate: 8 lt/min) • Length of outlet is 115 mm • Height of outlet is 155 mm • Measurements of Hot & Cold water flex hose connection are M10x1- ⅜’’ (or ½’’) 40 cm • Ideal operation pressure is 3 - 4 Bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filtered sub tap at the entrance of the flat is recommended.

Cartridge Diameter: Ø35

MLB95 ADURO LAVABO BATARYASI

Product Code & Name MSL95 Over Table Wash-Basin Armature

Surface Chrome Features 310

115

• Special water saving aerator (Bubble flow, with lime breaker, Flow rate: 8 lt/min) • Long height to be used at Over Table Wash-Basins • Length of outlet is 115mm • Height of outlet is 310mm • Measurements of Hot & Cold water flex hose connection are M10x1- ⅜’’ (or ½’’) 40 cm • Ideal operation pressure is 3 - 4 Bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filtered sub tap at the entrance of the flat is recommended.

Cartridge Diameter: Ø35

CATALOGUE

6

MSL 95 ADURO SETÜSTÜ LAVABO BAT.

Water Saving

Product Code & Name MBD95 Bidet Armature

115

Surface Chrome Features

• Pin jointed, special water saving aerator (Bubble flow, with lime breaker, Flow rate: 8 lt/min) • Length of outlet is 110mm • Height of outlet is 115mm • Measurements of Hot & Cold water flex hose connection are M10x1- ⅜’’ (or ½’’) 40 cm • Ideal operation pressure is 3 - 4 Bar • To prevent any damage which can be caused by the contaminants inside the

110

fittings, a filtered sub tap at the entrance of the flat is recommended.

Cartridge Diameter: Ø35

MBD 95 ADURO BİDE BATARYASI

Product Code & Name MTE95 Monoblock Sink Armature

Surface Chrome

280

190

Features

• Special water saving aerator (Bubble flow, with lime breaker, Flow rate: 8 lt/min) • With swivel spout • Length of outlet is 190mm • Height of outlet is 280mm • Measurements of Hot & Cold water flex hose connection are M10x1-⅜” (or ½’’) 40 cm • Ideal operation pressure is 3 - 4 Bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filtered sub tap at the entrance of the flat is recommended.

Cartridge Diameter: Ø35 MTE 95 ADURO TEK GÖVDE EVİYE BATARYASI

NOTES

CATALOGUE

7

QUADRO POWER OF DESIGN

CATALOGUE

8

CATALOGUE

9

QUADRO Product Code & Name MTA90 Fully Embedded Bathroom Armature

Surface Chrome Features

• Outlet with natural flow • Can be used both with embedded shower heads and hand showers • Lenght of outlet is 140 mm • Measurement of outlet connection ¾” • Installation under plaster • Ideal working pressure 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended

Cartridge Diameter: Ø40

Product Code & Name MAB90 Embedded Bathroom Armature

Surface Chrome Features

• Special aerator with water saving (Bubble flow, with lime breaker, Flow rate: 16 lt/min) • Compatible with all embedded shower heads and with all handsets by using GGR04.

• Length of outlet is 180 mm • Installation under plaster • Ideal operation pressure is 3 - 4 Bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

Cartridge Diameter: Ø40

Product Code & Name MKB90 50

Embedded Cabin Armature

Surface Chrome Features

• Compatible with all embedded shower heads and with all handsets • Shower outlet length is 17.5 mm • Wall outlet shower size is ½” • Wall outlet spiral hose union size is ½” • Installation under plaster • Ideal operation pressure is 3 - 4 Bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

Cartridge Diameter: Ø40

CATALOGUE

10

Water Saving Product Code & Name

22

MAD90 Embedded Shower Armature

G1/2"

Surface Chrome Features 950

• Connection diemension ½” (inlet-outlet) • Compatible with all embedded shower heads and with all handsets by using GGR04 • Installation under plaster • Ideal operation pressure 3-4 Bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

Cartridge Diameter: Ø35

MAD90 QUADRO ANKASTRE DUŞ BATARYASI GÜL PRES DÖKÜM SAN A.Ş.

Ø65

Product Code & Name MBB90 Bathroom Armature

5°

G 1/2 ''

130

Surface Chrome

140-160

G 1/2 ''

210

Features

• Special aerator with water saving (Bubble flow, with lime breaker, Flow rate: 16 lt/min) • Diverting unit which has locking system • Length of outlet is 210 mm • Armature connection threads are 3-4” • Eccentric connection threads sizes are ¾” - ½” • Spiral hose connection threads are ½” • Ideal operation pressure is 3 - 4 Bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

Cartridge Diameter: Ø40

MBB 90 QUADRO BANYO BATARYASI

80

Ø65

Product Code & Name

G 1/2 ''

MDB90 Shower Armature

140-160

G 1/2 ''

Surface Chrome Features

• Shower outlet length is 80 mm • Armature connection threads are ¾” • Eccentric connection threads are ¾” - ½” • Spiral hose connection threads are ½” • Ideal operation pressure is 3 - 4 Bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

Cartridge Diameter: Ø40

CATALOGUE

11

QUADRO Product Code & Name MAK90 Embedded Bathtub Armature

Surface Chrome HAND SHOWER

Features

• Special aerator with water saving (Bubble flow, with lime breaker, Flow rate: 16 lt/min) • 90° ceramic stemmer • Length of outlet is 155 mm • Height of outlet is 110 mm • Spiral hose with double clamp is 1800mm • Ideal operation pressure is 3 - 4 Bar • To prevent any damage which can be caused by the

contaminants inside the fittings, a filter at the entrance of the flat is recommended.

Product Code & Name MLB90 Wash-Basin Armature

105

Surface Chrome 100

Features

• Special water saving aerator (Bubble flow, lime remover, Flow rate: 8 lt/min) • Length of outlet 100 mm • Height of outlet 105 mm • Measurements of Hot & Cold water flex hose connection are M10x1- ⅜’’ (or ½’’) 40 cm • Ideal operation pressure is 3 - 4 Bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filtered sub tap at the entrance of the flat is recommended.

Cartridge Diameter: Ø35 MLB 90 QUADRO LAVABO BATARYASI

Product Code & Name MBD90 Bidet Armature

96

Surface Chrome

125

Features

• Pin jointed, special water saving aerator (Bubble flow, lime remover, Flow rate: 8 lt/min) • Length of outlet is 125 mm • Height of outlet is 96 mm • Measurements of Hot & Cold water flex hose connection are M10x1- ⅜’’ (or ½’’) 40 cm • Ideal operation pressure is 3 - 4 Bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filtered sub tap at the entrance of the flat is recommended.

Cartridge Diameter: Ø35 MBD 90 QUADRO BİDE BATARYASI

CATALOGUE

12

Water Saving Product Code & Name MTE90 Monoblock Sink Armature

Surface Chrome Features

190 280

• Special water saving aerator (Bubble flow, lime remover, Flow rate: 8 lt/min) • With swivel spout • Length of outlet is 190 mm • Height of outlet is 280 mm • Measurements of Hot & Cold water flex hose connection are M10x1-’’ (or ½’’) 40 cm • Ideal operation pressure is 3 - 4 Bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filtered sub tap at the entrance of the flat is recommended.

DIMENSIONS/ÖLÇÜLER >0.5 <3 ±0.05

>3 <6

±0.1

> 6 < 30 ±0.2

> 30 <120 ±0.3

>120 <315 ±0.5

RADIUS/ RADÜS >315 <1000 ±0.8

>1000 <2000 ±1.2

>0.5 <3 ±0.2

>3 <6 ±0.5

Cartridge Diameter: Ø35

ANGLE / AÇI > 6 < 30 ±1

> 30 <120 ±2

>120 <315 ±4

> 0 < 10 ±10'

>10 <50 ±20'

>50 <120 ±30'

120 den Büyük

MTE 90 TEK GÖVDE EVİYE BATARYASI

±1

Bu resmin telif hakkı GPD'ye aittir! Yazılı izni olmadan kopya edilemez ve kullanılamaz! The cpyright of this technical drawing belongs to GPD / . Without any written authorization the document can not reroduced or used.

Dikkat !

1.Teknik resim üzerinden ölçü almayınız.

Please don't take measuraments ower technical drawing.

2.3D hatlar ve belirtilmemiş ölçüleri 3D dökümana göre alınız.

3D Countours and missing dimension according to 3D data.

TOLERANCE TABLE / TOLERANS TABLOSU

DIN 7168 ORTA

Product Code & Name TMS90 TMS90-2 Interval Tap

50 DOSYAYI SON KAYDEDEN : huner.dengiz ÇİZİM TARİHİ : SON KAYIT TARİHİ : 16 Şubat 2017 Perşembe 11:24:35

NOTES

G 1/2"

Surface Chrome

RESİM KONUM BİLGİSİ : F:\gpd\gpd_projeler\gpd arşİv\01_urunler\banyo ve mutfak armatürlerİ\90 serİsİ quadro grubu\tms90\

Features

• 90° ceramic stemmer with turning on/off angle • Rosette size is 50x50 mm • Suitable for ⅜” connection

Features

• 90° ceramic stemmer with turning on/off angle • Rosette size is 50x50 mm • Suitable for ½” connection

Versiyon :

CATALOGUE

13

GPD ANTiK POWER OF DESIGN

CATALOGUE

14

CATALOGUE

15

GPD ANTİK G3/4"

∅70

Product Code & Name BNB20 Bathroom Armature

Surface Bronze G 1/2"

150

Features

140-160

• Double water entry • Rosette diameter Ø70 mm • Length of outlet is 150 mm • Armature connection threads ¾” • Eccentric connection threads ¾”-½” • Ideal working pressure 3-4 Bar • Special surface plating, in form of antique

BNB20 ANTİK BANYO BATARYASI

Product Code & Name SPS20 Spiral Set

Surface Bronze Features

150 cm Spiral Hose

• Adjustable jointed hang shower hanger • Hanger of armature connection is included • Brass spiral hose 150 cm (with hand shower) • Special surface plating in form of antigue

(G1/2" - G1/2")

G 3/4"

Product Code & Name TKB20 Eagle Wash-Basin Armature

14°

110

Surface Bronze Features SINK

140

TKB20 ANTİK KARTAL LAVABO BATARYASI

CATALOGUE

16

• Special water saving aerator (Bubble flow, with lime breaker, Flow rate:8lt/min.)

• Measurement of hot and cold water flex hose connection M10x1- ⅜’’ (or ½’’) 40 cm • Length of outlet is 140 mm • Height of outlet is 110 mm • Ideal working pressure 3-4 Bar • Special surface plating,in form of antique

Water Saving

Product Code & Name UMS20 Long Tap

Surface Bronze

• Length of outlet is 130 mm • Rosette diameter Ø70 mm • Tap-wall connection size ½” • Ideal working pressure 3-4 Bar • Special surface plating,in form of antique

G 1/2"

Ø70

Features

130 UMS20 ANTİK UZUN MUSLUK

CMS20.pdf

1

12/05/14

14:48

Product Code & Name CMS20 Laundry Tap

Surface Bronze Features

C

Y

MY

CY

CMY

Ø60 G 1/ 2"

M

CM

• Length of outlet is 57 mm • Rosette diameter Ø60 mm • Tap-wall connection size ½” • Ideal working pressure 3-4 Bar • Special surface plating,in form of antique

K

57

Product Code & Name TMS20 Interval Tap

Ø60 G 1/2"

Surface Bronze Features G 3/8"

• Rosette diameter Ø60 mm • Compatible with connection of ⅜” • Tap-wall connection size ½” • Special surface plating,in form of antique

TMS20 ANTİK TAHARAT MUSLUK

CATALOGUE

17

PROPRIETARY PRODUCT DESIGN

FUEGO POWER OF DESIGN

CATALOGUE

18

CATALOGUE

19

FUEGO

PROPRIETARY PRODUCT DESIGN

G1/2"

Product Code & Name MTA105

STOCKS LIMITED

70

Fully Embedded Bathroom Armature

Surface Chrome G 1/2"

Features

650

G 3/4"

300

45

30°

140

• Exclusive design square rosette and square diverter handle, square cartridge cover • Outlet with natural flow • Special cartridge with heat and flow rate adjustment • Compatible with all embedded shower heads and with all handsets • Length of outlet 140 mm • Measurement of outlet connection ¾” • Installation under plaster • Ideal working pressure 3-4 Bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

Cartridge Diameter: Ø35 MTA105 FUEGO TAM ANKASTRE BANYO BATARYASI GÜL PRES DÖKÜM SAN A.Ş.

Product Code & Name

G1/2"

MKB105

STOCKS LIMITED

Embedded Cabin Armature 70

Surface Chrome Features

300

G 1/2"

• Exclusive design square rosette and square diverter handle, square cartridge cover • Compatible with all embedded shower heads and with all handsets • Special cartridge with heat and flow rate adjustment • Suitable with all embedded shower head and hand showers • Shower outlet length 17,5 mm • Shower outlet wall connection diemension ½” • Shower outlet spiral hose connection diemension ½” • Installation under plaster • Ideal working pressure 3-4 Bar • To prevent any damage which can be caused by the contaminants inside

650

G 1/2"

45

the fittings, a filter at the entrance of the flat is recommended.

Cartridge Diameter: Ø35

MBB105-MİX BANYO BATARYASI

Product Code & Name MBB105 Bathroom Armature 60

Surface Chrome G1/2"

128

140-160

G1/2"

206

Features

• Outlet with natural flow • Special cartridge with heat and flow rate adjustment • with special design hand shower (with lime breaker) • with 150 cm spiral hose (½”-½”) • Length of outlet 206 mm • Armature connection threads are ¾” • Eccentric connection threads are ¾” - ½” • Spiral Hose connection threads are ½” • Ideal operation pressure 3-4 Bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

Cartridge Diameter: Ø35

CATALOGUE

20

Energy Saving

MLB105-MİX LAVABO BATARYASI

Water Saving

Product Code & Name MLB105 Wash-Basin Armature

Surface Chrome 102

Features

123

• Special rectangle aerator relevant with body design (Bubble flow, with lime breaker) • Special cartridge with heat and flow rate adjustment • Length of outlet 123 mm • Height of outlet 102 mm • Measurements of hot & cold water flex hose connection are M10x1- ⅜’’ (or ½’’) 40 cm • Ideal operation pressure 3-4 Bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filtered sub tap at the entrance of the flat is recommended

Cartridge Diameter: Ø35

Product Code & Name MTE105 Monoblock Sink Armature

Surface Chrome 256

Features

168

• Special rectangle aerator relevant with body design (Bubble flow, with lime breaker) • Special cartridge with heat and flow rate adjustment • With swivel spout • Lenght of outlet is 168 mm • Height of outlet is 256 mm • Measurements of hot and cold water flex hose connection are M10x1-⅜” (or ½”)40 cm • Ideal working pressure 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filtered interval tap is recommended

Cartridge Diameter: Ø35

NOTES

CATALOGUE

21

PROVIDO POWER OF DESIGN

CATALOGUE

22

CATALOGUE

23

PROVIDO Product Code & Name MLB155 Wash-Basin Armature

Surface Chrome Features

155

155

• Special aerator (flow rate 8 lt /min) • Special cartridge with heat and flow rate adjustment • Lenght of outlet is 155 mm • Height of outlet is 155 mm • Measurements of hot and cold water flex hose connection are M10x1-⅜” (or ½”)40 cm • Ideal operation pressure 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filtered interval tap is recommended

Cartridge Diameter: Ø35

Product Code & Name MBB155 Bathroom Armature

Surface Chrome 140-160

°

G 1/2"

10

65

G 1/2"

Features

• Special aerator (flow rate 16 lt /min) • Special cartridge with heat and flow rate adjustment • Lenght of outlet is 175 mm • Armature connection threads are ¾”, eccentric connection threads are ¾”-½” • Spiral hose connection thread ½” • Ideal operation pressure 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended

175

Cartridge Diameter: Ø35

Product Code & Name MDB155 Shower Armature

Surface Chrome 140-160

65,00

G 1/2"

Features

• Shower outlet lenght is 52 mm • Special cartridge with heat and flow rate adjustment • Armature connection threads are ¾”, eccentric connection threads are ¾”-½” • Spiral hose connection thread ½” • Ideal operation pressure 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended

G 1/2" 52

CATALOGUE

24

Cartridge Diameter: Ø35

Energy Saving

Water Saving

Product Code & Name MTE155 Monoblock Sink Armature

185

272

Surface Chrome Features

• Special aerator (flow rate 8 lt /min) • Special cartridge with heat and flow rate adjustment • With swivel spout • Lenght of outlet is 185 mm • Height of outlet is 272 mm • Measurements of hot and cold water flex hose connection are M10x1-⅜” (or ½”)40 cm • Ideal operation pressure 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filtered interval tap is recommended

Cartridge Diameter: Ø35

Product Code & Name MSL155 Over Table Wash-Basin Armature

Surface Chrome 243

155

Features

• Special aerator (flow rate 8 lt /min) • Special cartridge with heat and flow rate adjustment • Long height to be used at over table wash basins • Lenght of outlet is 155 mm • Height of outlet is 243 mm • Measurements of hot and cold water flex hose connection are M10x1-⅜” (or ½”)40 cm • Ideal operation pressure 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filtered interval tap is recommended

Cartridge Diameter: Ø35

Product Code & Name MLB155-A Wash-Basin Armature

155

155

Surface PVD Coating (Gold Effect) Features

• Special aerator (flow rate 8 lt /min) • Special cartridge with heat and flow rate adjustment • Lenght of outlet is 155 mm • Height of outlet is 155 mm • Measurements of hot and cold water flex hose connection are M10x1-⅜” (or ½”)40 cm • Ideal operation pressure 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filtered interval tap is recommended

Cartridge Diameter: Ø35

CATALOGUE

25

PROVIDO Product Code & Name MBB155-A Bathroom Armature

Surface PVD Coating (Gold Effect) Features

°

G 1/2"

10

65

G 1/2"

140-160

• Special aerator (flow rate 16 lt /min) • Special cartridge with heat and flow rate adjustment • Lenght of outlet is 175 mm • Armature connection threads are ¾”, eccentric connection threads are ¾”-½” • Spiral hose connection thread ½” • Ideal operation pressure 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended

175

Cartridge Diameter: Ø35

Product Code & Name MDB155-A Shower Armature

Surface PVD Coating (Gold Effect) 140-160

• Shower outlet lenght is 52 mm • Special cartridge with heat and flow rate adjustment • Armature connection threads are ¾”, eccentric connection threads are ¾”-½” • Spiral hose connection thread ½” • Ideal operation pressure 3-4 bar • To prevent any damage which can be caused

65,00

G 1/2"

Features

G 1/2"

by the contaminants inside the fittings, a filter at the entrance of the flat is recommended

52

Cartridge Diameter: Ø35

Product Code & Name MTE155-A Monoblock Sink Armature

185

272

Surface PVD Coating (Gold Effect) Features

• Special aerator (flow rate 8 lt /min) • Special cartridge with heat and flow rate adjustment • With swivel spout • Lenght of outlet is 185 mm • Height of outlet is 272 mm • Measurements of hot and cold water flex hose connection are M10x1-⅜” (or ½”)40 cm • Ideal operation pressure 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filtered interval tap is recommended

Cartridge Diameter: Ø35

CATALOGUE

26

Energy Saving

Water Saving

Product Code & Name MSL155-A Over Table Wash-Basin Armature

Surface PVD Coating (Gold Effect)

243

155

Features

• Special aerator (flow rate 8 lt /min) • Special cartridge with heat and flow rate adjustment • Long height to be used at over table wash basins • Lenght of outlet is 155 mm • Height of outlet is 243 mm • Measurements of hot and cold water flex hose connection are M10x1-⅜” (or ½”)40 cm • Ideal operation pressure 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filtered interval tap is recommended

Cartridge Diameter: Ø35

NOTES

CATALOGUE

27

TAURO POWER OF DESIGN

CATALOGUE

28

CATALOGUE

29

TAURO Product Code & Name MLB150 Wash-Basin Armature

Surface Chrome Features

85

126

• Special aerator (flow rate 8 lt /min) • Special cartridge with heat and flow rate adjustment • Lenght of outlet is 126 mm • Height of outlet is 85 mm • Measurements of hot and cold water flex hose connection are M10x1-⅜” (or ½”) 40 cm • Ideal operation pressure 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filtered interval tap is recommended

Cartridge Diameter: Ø35

Product Code & Name MBB150 Bathroom Armature

Surface Chrome Features

70

G 1/2"

140-160

• Special aerator (flow rate 16 lt /min) • Special outlet tip design with 90° rotation • Shower alignment with outlet brought in parallel with the wall surface • Aerator shower alignment with outlet brought in perpendicular with the wall surface • Special cartridge with heat and flow rate adjustment • Lenght of outlet is 167 mm • Armature connection threads are ¾”, eccentric connection threads are ¾”-½” • Spiral hose connection thread ½” • Ideal operation pressure 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended

Cartridge Diameter: Ø35

°

20

G 1/2" 167

Product Code & Name MDB150 Shower Armature

Surface Chrome 140-160

70

G 1/2"

Features

• Shower outlet lenght is 63 mm • Special cartridge with heat and flow rate adjustment • Armature connection threads are ¾”, eccentric connection threads are ¾”-½” • Spiral hose connection thread ½” • Ideal operation pressure 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended

Cartridge Diameter: Ø35 G 1/2" 63

CATALOGUE

30

Energy Saving

Water Saving

Product Code & Name MTE150 Monoblock Sink Armature

Surface Chrome

°

10 190

270

Features

• Special aerator (flow rate 8 lt /min) • Special cartridge with heat and flow rate adjustment • With swivel spout • Lenght of outlet is 190 mm • Height of outlet is 270 mm • Measurements of hot and cold water flex hose connection are M10x1-⅜” (or ½”)40 cm • Ideal operation pressure 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filtered interval tap is recommended

Cartridge Diameter: Ø35

Product Code & Name MSL150 Over Table Wash-Basin Armature

Surface Chrome Features 205

126

• Special aerator (flow rate 8 lt /min) • Special cartridge with heat and flow rate adjustment • Long height to be used at over table wash basins • Lenght of outlet is 126 mm • Height of outlet is 205 mm • Measurements of hot and cold water flex hose connection are M10x1-⅜” (or ½”)40 cm • Ideal operation pressure 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filtered interval tap is recommended

Cartridge Diameter: Ø35

Product Code & Name MLB150-A Wash-Basin Armature

126

85

Surface PVD Coating (Gold Effect) Features

• Special aerator (flow rate 8 lt /min) • Special cartridge with heat and flow rate adjustment • Lenght of outlet is 126 mm • Height of outlet is 85 mm • Measurements of hot and cold water flex hose connection are M10x1-⅜” (or ½”)40 cm • Ideal operation pressure 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filtered interval tap is recommended

Cartridge Diameter: Ø35

CATALOGUE

31

TAURO Product Code & Name MBB150-A Bathroom Armature

Surface PVD Coating (Gold Effect) Features

70

G 1/2"

140-160

• Special aerator (flow rate 16 lt /min) • Special outlet tip design with 90° rotation • Shower alignment with outlet brought in parallel with the wall surface • Aerator shower alignment with outlet brought in perpendicular with the wall surface • Special cartridge with heat and flow rate adjustment • Lenght of outlet is 167 mm • Armature connection threads are ¾”, eccentric connection threads are ¾”-½” • Spiral hose connection thread ½” • Ideal operation pressure 3-4 bar • To prevent any damage which can be caused by the contaminants

° 20

inside the fittings, a filter at the entrance of the flat is recommended

G 1/2"

Cartridge Diameter: Ø35

167

Product Code & Name MDB150-A Shower Armature

Surface PVD Coating (Gold Effect) 140-160

70

G 1/2"

Features

• Shower outlet lenght is 63 mm • Special cartridge with heat and flow rate adjustment • Armature connection threads are ¾”, eccentric connection threads are ¾”-½” • Spiral hose connection thread ½” • Ideal operation pressure 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended

Cartridge Diameter: Ø35 G 1/2" 63

Product Code & Name MTE150-A Monoblock Sink Armature

Surface PVD Coating (Gold Effect) °

10 190

270

Features

• Special aerator (flow rate 8 lt /min) • Special cartridge with heat and flow rate adjustment • With swivel spout • Lenght of outlet is 190 mm • Height of outlet is 270 mm • Measurements of hot and cold water flex hose connection are M10x1-⅜” (or ½”)40 cm • Ideal operation pressure 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filtered interval tap is recommended

Cartridge Diameter: Ø35

CATALOGUE

32

Energy Saving

Water Saving

Product Code & Name MSL150-A Over Table Wash-Basin Armature

Surface PVD Coating (Gold Effect) Features 205

126

• Special aerator (flow rate 8 lt /min) • Special cartridge with heat and flow rate adjustment • Long height to be used at over table wash basins • Lenght of outlet is 126 mm • Height of outlet is 205 mm • Measurements of hot and cold water flex hose connection are M10x1-⅜” (or ½”)40 cm • Ideal operation pressure 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filtered interval tap is recommended

Cartridge Diameter: Ø35

NOTES

CATALOGUE

33

PROPRIETARY PRODUCT DESIGN

FREZIA POWER OF DESIGN

CATALOGUE

34

CATALOGUE

35

FREZIA

PROPRIETARY PRODUCT DESIGN MBB100-MİX BANYO BATARYASI

65

Product Code & Name MBB100 G1/2"

Bathroom Armature

50 160

Surface Chrome

G1/2"

Features

140-160

• Special design lever • Cache aerator (Bubble flow, with lime breaker), Flow rate:16lt/dk) • Special cartridge with heat and flow rate adjustment • Length of outlet 160 mm • Armature connection threads are ¾” • Eccentric connection threads are ¾” - ½” • Spiral Hose connection threads are ½” • Ideal operation pressure 3-4 Bar • To prevent any damage which can be caused by the

contaminants inside the fittings, a filter at the entrance of the flat is recommended.

MLB100-MİX LAVABO BATARYASI

Cartridge Diameter: Ø35

Product Code & Name MLB100 Wash-Basin Armature

Surface Chrome 150

Features

• Special design lever • Special water saving aerator (Bubble flow, with lime breaker), Flow rate:8lt/dk) • Special cartridge with heat and flow rate adjustment • With swivel spout • Length of outlet 117 mm - Height of outlet 150 mm • Measurements of hot & cold water flex hose connection are M10x1- ⅜’’ (or ½’’) 40 cm • Ideal operation pressure 3-4 Bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filtered sub tap at the entrance of the flat is recommended

117

Cartridge Diameter: Ø35

MTE100-MİX TEK GÖVDE EVİYE BATARYASI

Product Code & Name MTE100 Monoblock Sink Armature

Surface Chrome 270

Features

• Special design lever • Special water saving aerator (Bubble flow, with lime breaker), Flow rate:8lt/dk) • Special cartridge with heat and flow rate adjustment • With swivel spout • Length of outlet 190 mm • Height of outlet 270 mm • Measurements of hot & cold water flex hose connection are M10x1- ⅜’’ (or ½’’) 40 cm • Ideal operation pressure 3-4 Bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filtered sub tap at the entrance of the flat is recommended

190

CATALOGUE

36

Cartridge Diameter: Ø35

Energy Saving

Water Saving

NOTES

CATALOGUE

37

NOVA MODERN LIVES

CATALOGUE

38

CATALOGUE

39

NOVA Product Code & Name MTA35

STOCKS LIMITED

70

Fully Embedded Bathroom Armature

Surface Chrome

650

300

Features

125

• Special aerator (Bubble flow, with lime breaker, Flow rate: 16 lt/min) • Special cartridge with heat and flow rate adjustment • Can be used both with embedded shower heads and hand showers • Lenght of outlet is 125 mm • Diverting unit with locking system • Measurement of outlet connection ¾” • Installation under plaster • Ideal working pressure 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended

MAB 35 NOVA ANKASTRE BANYO BATARYASI

Cartridge Diameter: Ø40

Product Code & Name MAB35

STOCKS LIMITED

70

Embedded Bathroom Armature

Surface Chrome

650

300

Features

120

• Special aerator (Bubble flow, with lime breaker, Flow rate: 16 lt/min) • Special cartridge with heat and flow rate adjustment • Can be used both with embedded shower heads and with all handsets by using GGR05 • Lenght of outlet is 120 mm • Measurement of outlet connection ¾” • Installation under plaster • Ideal working pressure 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended

Cartridge Diameter: Ø40

Product Code & Name MKB35

STOCKS LIMITED

70

Embedded Cabin Armature

Surface Chrome

650

300

Features

• Special cartridge with heat and flow rate adjustment • Can be used both with embedded shower heads and hand showers • Lenght of outlet is 17,5 mm • Measurement of outlet connection ½” • Measurement of shower outlet spiral hose connection ½” • Installation under plaster • Ideal working pressure 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended

Cartridge Diameter: Ø40

CATALOGUE

40

Energy Saving

Water Saving

Product Code & Name Ø65

MBB35 10

°

Bathroom Armature G1/2"

Surface Chrome

127 180

Features

140-160

G 1/2 ''

• Special aerator with water saving (Bubble flow, with lime breaker, Flow rate: 16 lt/min) • Special cartridge with flow rate adjustment • Diverting unit which has locking system • Length of outlet is 180 mm • Armature connection threads are 3 / 4 ” • Eccentric connection threads are ¾” - ½” • Spiral hose connection threads are ½” • Ideal operation pressure is 3 - 4 Bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

Cartridge Diameter: Ø40 MBB35 NOVA MİX BANYO BATARYASI

Product Code & Name Ø65

MDB35 Shower Armature G1/2"

Surface Chrome

65

Features

G 1/2 ''

140-160

• Shower outlet length is 65 mm • Special cartridge with flow rate adjustment • Armature connection threads are ¾” • Eccentric connection threads are ¾” - ½” • Spiral hose threads are ½” • Ideal operation pressure is 3 - 4 Bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

Cartridge Diameter: Ø40 MBB35 NOVA MİX DUŞ BATARYASI

Product Code & Name MLB35 Wash-Basin Armature

Surface Chrome

100

Features 110

• Special water saving aerator (Bubble flow, with lime breaker, Flow rate: 8 lt/min) • Length of outlet is 110 mm • Height of outlet is 100 mm • Hot and cold flex hose connection sizes M10x1- ⅜’’ (or ½’’) 40 cm • Ideal operation pressure is 3 - 4 Bar • To prevent any damage which can be caused

by the contaminants inside the fittings, a filtered interval tap at the entrance of the flat is recommended.

Cartridge Diameter: Ø40 MLB35 NOVA MİX LAVABO BATARYASI .....

CATALOGUE

41

NOVA Product Code & Name MTL35

218

Monoblock Wash-Basin Armature

Surface Chrome

165

Features

• Special water saving aerator (Bubble flow, with lime breaker, Flow rate:16lt/min.)

• Special cartridge with heat and flow rate adjustment • With swivel spout • Length of outlet 140 mm • Height of outlet 165 mm • Hot and cold flex hose connection sizes M10x1- ⅜’’ (or ½’’) 40 cm • Ideal working pressure 3-4 Bar • To prevent any damage which can be caused by

140

the contaminants inside the fittings, a filtered sub tap at the entrance of the flat is recommended

Cartridge Diameter: Ø35

MTL35 NOVA TEK GÖVDE LAVABO BATAYASI GÜL PRES DÖKÜM SAN A.Ş.

Product Code & Name MAL35 Applique Wash-Basin Armature

65

Surface Chrome 65

Features

230 G 1/2 ''

• Special water saving aerator (Bubble flow, with lime breaker, Flow rate:8lt/min.)

• Special cartridge with heat and flow rate adjustment • With swivel spout • Length of outlet is 230 mm • Armature connection threads ¾” • Eccentric connection threads ¾”-½” • Ideal working pressure 3-4 Bar • To prevent any damage which can be caused by

140-160

the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

Cartridge Diameter: Ø40

Product Code & Name MBD35 Bidet Armature

Surface Chrome

115

Features 105

• Special water saving aerator (Bubble flow, with lime breaker, Flow rate: 8 lt/min) • Length of outlet is 105 mm • Height of outlet is 115 mm • Measurements of Hot & Cold water flex hose connection are M10x1- ⅜’’ (or ½’’) 40 cm • Ideal operation pressure is 3 - 4 Bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filtered interval tap at the entrance of the flat is recommended.

MLB35 NOVA MİX BİDE BATARYASI

CATALOGUE

42

Cartridge Diameter: Ø40

Energy Saving

Water Saving

Product Code & Name MTE35 Monoblock Sink Armature

Surface Chrome Features

190

255

• Special water saving aerator (Bubble flow, with lime breaker, Flow rate: 8 lt/min) • Special cartridge with flow rate adjustment - With swivel spout • Length of outlet is 190 mm • Height of outlet is 255 mm • Measurements of Hot & Cold water flex hose connection are M10x1- ⅜’’ (or ½’’) 40 cm • Ideal operation pressure is 3 - 4 Bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filtered interval tap at the entrance of the flat is recommended.

Cartridge Diameter: Ø35 MTE35 NOVA MİX TEK GÖVDE EVİYE BATARYASI

Product Code & Name MEE35 Industrial Sink Armature

Surface Chrome 565

Features

130

200

180

245

• Special aerator with water saving (Bubble flow, with lime breaker) • With swivel spout - Flexible use with helical spring outlet end pipe • Hand shower with manual opening/closing • Diverting unit either for outlet end or hand shower which has locking system • Length of outlet is 180 mm • Height of outlet 200 mm • Measurements of Hot & Cold water flex hose connection are M10x1- ⅜’’ (or ½’’) 40 cm • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filtered interval tap at the entrance of the flat is recommended.

Cartridge Diameter: Ø35

Product Code & Name MAE35 Applique Sink Armature 65

Surface Chrome 65

G 1/2 ''

275

140-160

Features

• Special water saving aerator (Bubble flow, with lime breaker, Flow rate:8lt/min.)

• Special cartridge with heat and flow rate adjustment • With swivel spout • Length of outlet is 275 mm • Armature connection threads ¾” • Eccentric connection threads ¾”-½” • Ideal working pressure 3-4 Bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

Cartridge Diameter: Ø40

CATALOGUE

43

PROPRIETARY PRODUCT DESIGN

RITMO MODERN LIVES

CATALOGUE

44

CATALOGUE

45

RITMO

C extension products HAS cold start CAPABILITY

PROPRIETARY PRODUCT DESIGN

G1/2"

Product Code & Name MTA85 Fully Embedded Bathroom Armature

• Special cartridge with heat and flow rate adjustment

70

STOCKS LIMITED

MTA85-C Fully Embedded Bathroom Armature

• Cold start cartridge - when the handle is in the middle position, system start with cold water

G 1/2"

Surface Chrome Features

650

G 3/4"

300

45

130

• Exclusive design square rosette and square diverter handle, square cartridge cover • Special water saving aerator (Bubble flow, with lime breaker), Flow rate:16lt/min.)

• Compatible with embedded system and hand showers • Length of outlet 130 mm • Measurement of outlet connection ¾” • Installation under plaster • Ideal working pressure 3-4 Bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

Cartridge Diameter: Ø35

G1/2"

Product Code & Name MAB85 Embedded Bathroom Armature

• Special cartridge with heat and flow rate adjustment

STOCKS LIMITED

70

MAB85-C Embedded Bathroom Armature

• Cold start cartridge -when the handle is in the middle position, system start with cold water

Surface Chrome Features

G 1/2"

650

G 3/4"

300

45

130

• Exclusive design square rosette and square diverter handle, square cartridge cover • Special water saving aerator (Bubble flow, with lime breaker), Flow rate:16lt/min.)

• Compatible with all embedded shower heads and with all handsets by using GGR04 • Length of outlet 130 mm • Measurement of outlet connection ¾” • Installation under plaster • Ideal working pressure 3-4 Bar • To prevent any damage which can be caused by

the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

Cartridge Diameter: Ø35

Product Code & Name

G1/2"

MKB85 Embedded Cabin Armature

• Special cartridge with heat and flow rate adjustment

STOCKS LIMITED

MKB85-C Embedded Cabin Armature

70

• Cold start cartridge -when the handle is in the middle position, system start with cold water

Surface Chrome Features 45

G 1/2"

650

300

G 1/2"

• Exclusive design square rosette and square diverter handle, square cartridge cover • Compatible with all embedded shower heads and with all handsets • Suitable with all embedded shower head and hand showers • Shower outlet length 17,5 mm • Shower outlet wall connection diemension ½” • Shower outlet spiral hose connection diemension ½” • Installation under plaster • Ideal working pressure 3-4 Bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

Cartridge Diameter: Ø35

CATALOGUE

46

Product Code & Name MBB85 Bathroom Armature 60

• Special cartridge with heat and flow rate adjustment

MBB85-C Bathroom Armature

G1/2"

• Cold start cartridge - when the handle is in the middle position,

100 162

system start with cold water

Surface Chrome G 1/2"

Features

• Special water saving aerator (Bubble flow, with lime breaker), Flow rate : 16lt/dk) • Length of outlet 162 mm • Armature connection threads are ¾” • Eccentric connection threads are ¾” - ½” • Spiral Hose connection threads are ½” • Ideal operation pressure 3-4 Bar • To prevent any damage which can be caused

by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

Cartridge Diameter: Ø35

MLB85-MİX LAVABO BATARYASI

Product Code & Name MLB85 Wash-Basin Armature

• Special cartridge with heat and flow rate adjustment MLB85-C Wash-Basin Armature

• Cold start cartridge - when the handle is in the middle position, system start with cold water

100

Surface Chrome Features

Water Saving

MBB85-MİX BANYO BATARYASI

140-160

Energy Saving

130

• Special water saving aerator (Bubble flow, with lime breaker), Flow rate:8lt/dk) • Length of outlet 130 mm • Height of outlet 100 mm • Measurements of hot & cold water flex hose connection are M10x1- ⅜’’ (or ½’’) 40 cm • Ideal operation pressure 3-4 Bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filtered sub tap at the entrance of the flat is recommended

Cartridge Diameter: Ø35

Product Code & Name MTE85 Monoblock Sink Armature

• Special cartridge with heat and flow rate adjustment

MTE85-C Monoblock Sink Armature

• Cold start cartridge - when the handle is in the middle position, system start with cold water

Surface Chrome Features

• Special aerator (Bubble flow, with lime breaker, flow rate 8 lt /min) • With swivel spout • Lenght of outlet is 244 mm • Height of outlet is 290 mm • Measurements of hot and cold water flex hose connection are M10x1-⅜” (or ½”)40 cm • Ideal working pressure 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filtered interval tap is recommended

Cartridge Diameter: Ø35

CATALOGUE

47

FONTE MODERN LIVES

CATALOGUE

48

CATALOGUE

49

FONTE Product Code & Name Ø65

MBB15 Bathroom Armature G 1/2 ''

Surface Chrome

185

G 1/2 ''

Features

140-160

• Special aerator with water saving (Bubble flow, with lime breaker, Flow rate: 16 lt/min) • Special cartridge with heat and flow rate adjustment • Length of outlet is 185 mm • Armature connection threads are ¾” • Eccentric connection threads are ¾” - ½” • Spiral hose connection threads are ½” • Ideal operation pressure is 3 - 4 Bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

Cartridge Diameter: Ø35 MBB15 FONTE MİX BANYO BATARYASI

Product Code & Name Ø65

MDB15 Shower Armature G 1/2 ''

Surface Chrome

65

G 1/2 ''

Features

140-160

• Special cartridge with heat and flow rate adjustment • Length of outlet is 65 mm • Armature connection threads are ¾” • Eccentric connection threads are ¾” - ½” • Spiral hose threads are ½” • Ideal operation pressure is 3 - 4 Bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

Cartridge Diameter: Ø35

MDB15 FONTE MİX DUŞ BATARYASI

Product Code & Name MLB15 Wash-Basin Armature

Surface Chrome Features

80

10°

125

• Special water saving aerator (Bubble flow, with lime breaker, Flow rate: 8 lt/min) • Special cartridge with heat and flow rate adjustment • Length of outlet is 125 mm - Height of outlet is 80 mm • Measurements of Hot & Cold water flex hose connection are M10x1- ⅜’’ (or ½’’) 40 cm • Ideal operation pressure is 3 - 4 Bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filtered interval tap at the entrance of the flat is recommended.

Cartridge Diameter: Ø35

CATALOGUE

50

Energy Saving

Water Saving

Product Code & Name MAL15 Applique Wash-Basin Armature

65

Surface Chrome 65

Features

230

G 1/2 ''

• Special water saving aerator (Bubble flow, with lime breaker, Flow rate:8lt/min.)

• Special cartridge with heat and flow rate adjustment • With swivel spout • Length of outlet is 230 mm • Armature connection threads ¾” • Eccentric connection threads ¾”-½” • Ideal working pressure 3-4 Bar • To prevent any damage which can be caused

140-160

by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

Cartridge Diameter: Ø35

Product Code & Name MBD15 Bidet Armature

Surface Chrome

90

Features

• Pin jointed, Special water saving aerator (Bubble flow, with lime breaker, Flow rate: 8 lt/min) • Special cartridge with heat and flow rate adjustment • Length of outlet is 123 mm • Outlet tip height is 90 mm • Measurements of Hot & Cold water flex hose connection are M10x1- ⅜’’ (or ½’’) 40 cm • Ideal operation pressure is 3 - 4 Bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filtered interval tap at the entrance of the flat is recommended.

123

Cartridge Diameter: Ø35 MBD15 FONTE MİX BİDE BATARYASI

Product Code & Name MTE15 Monoblock Sink Armature

Surface Chrome 190

295

Features

• Special water saving aerator (Bubble flow, with lime breaker, Flow rate: 8 lt/min) • Special cartridge with heat and flow rate adjustment • With swivel spout • Length of outlet 190 mm • Height of outlet 295 mm • Measurements of Hot & Cold water flex hose connection are M10x1-⅜”(or ½”) 40cm • Ideal operation pressure is 3 - 4 Bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filtered interval tap at the entrance of the flat is recommended.

Cartridge Diameter: Ø35 MTE15 FONTE TEK GÖVDE EVİYE BATARYASI

CATALOGUE

51

FONTE Product Code & Name MAE15 Applique Sink Armature 65

Surface Chrome 65 275

Features

G 1/2 ''

• Special water saving aerator (Bubble flow, with lime breaker, Flow rate:8lt/min.)

• Special cartridge with heat and flow rate adjustment • With swivel spout • Length of outlet is 275 mm • Armature connection threads ¾” • Eccentric connection threads ¾”-½” • Ideal working pressure 3-4 Bar • To prevent any damage which can be caused

140-160

by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

Cartridge Diameter: Ø35

Product Code & Name TMS15

TMS15-2

Interval Tap

G1/2"

Surface Chrome

TMS 35 FONTE TAHARAT MUSLUK

CATALOGUE

52

Features

• 90° ceramic stemmer with turning on/off angle • Rosette size is ø55 mm • Suitable for ⅜” connection

Features

• 90° ceramic stemmer with turning on/off angle • Rosette size is ø55 mm • Suitable for ½” connection

Energy Saving

Water Saving

NOTES

CATALOGUE

53

FELIS MODERN LIVES

CATALOGUE

54

CATALOGUE

55

FELIS G1/2"

Product Code & Name MTA75

STOCKS LIMITED

70

Fully Embedded Bathroom Armature

Surface Chrome Features

G 1/2"

• Special water saving aerator (Bubble flow, with lime breaker), Flow rate:16lt/min.)

• Special cartridge with heat and flow rate adjustment • Compatible with all embedded shower heads and with all handsets • Length of outlet 125 mm • Diverting unit with locking system • Measurement of outlet connection ¾” • Installation under plaster • Ideal working pressure 3-4 Bar • To prevent any damage which can be caused

650

G 3/4"

300

30

125

by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

Cartridge Diameter: Ø35

G1/2"

Product Code & Name MAB75

STOCKS LIMITED

70

Embedded Bathroom Armature

Surface Chrome Features

300

G 1/2"

650

G 3/4"

30

120

• Special water saving aerator (Bubble flow, with lime breaker), Flow rate:16lt/min.)

• Special cartridge with heat and flow rate adjustment • Compatible with all embedded shower heads and with all handsets by using GGR05 • Length of outlet 120 mm • Measurement of outlet connection ¾” • Installation under plaster • Ideal operation pressure 3-4 Bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

Cartridge Diameter: Ø35

G1/2"

Product Code & Name MKB75

STOCKS LIMITED

70

Embedded Cabin Armature

Surface Chrome Features

CATALOGUE

56

30

G 1/2"

650

300

G 1/2"

• Special cartridge with heat and flow rate adjustment • Compatible with all embedded shower heads and with all handsets • Shower outlet length 17.5 mm • Shower outlet wall connection diemension ½” • Shower outlet spiral hose connection diemension ½” • Installation under plaster • Ideal working pressure 3-4 Bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

Cartridge Diameter: Ø35

Energy Saving

Water Saving

Product Code & Name MBB75 Bathroom Armature

Surface Chrome

G 1/2"

161

Features

• Cache aerator (Bubble flow, with lime breaker, flow rate 16 lt /min) • Special cartridge with heat and flow rate adjustment • Lenght of outlet is 161 mm • Diverting unit with locking system • Armature connection threads are ¾” • Eccentric connection threads are ¾”-½” • Spiral hose connection thread ½” • Ideal operation pressure 3-4 bar • To prevent any damage which can be caused by the contaminants

140-160

G 1/2"

66,50

inside the fittings, a filter at the entrance of the flat is recommended

Cartridge Diameter: Ø35

MLB75-MİX LAVABO BATARYASI

Product Code & Name MLB75 Wash-Basin Armature

95

Surface Chrome Features

• Cache water saving aerator (Bubble flow, with lime breaker), Flow rate:8lt/min.)

• Special cartridge with heat and flow rate adjustment • Length of outlet 122 mm • Height of outlet 95 mm • Measurements of hot & cold water flex hose connection are M10x1- ⅜’’ (or ½’’) 40 cm • Ideal operation pressure 3-4 Bar • To prevent any damage which can be caused

by the contaminants inside the fittings, a filtered sub tap at the entrance of the flat is recommended

122

Cartridge Diameter: Ø35

Product Code & Name MTL75

160

225

Monoblock Wash-Basin Armature

Surface Chrome Features

• Special water saving aerator (Bubble flow, with lime breaker), Flow rate:8lt/min.)

• Special cartridge with heat and flow rate adjustment • With swivel spout • Length of outlet 150 mm • Height of outlet 160 mm • Measurement of hot and cold water flex hose connection M10x1- ⅜’’ (or ½’’) 40 cm • Ideal working pressure 3-4 Bar • To prevent any damage which can be caused

150

by the contaminants inside the fittings, a filtered sub tap at the entrance of the flat is recommended

MTL75 FELİS TEK GÖVDE LAVABO BATARYASI

Cartridge Diameter: Ø35 GÜL PRES DÖKÜM SAN A.Ş.

CATALOGUE

57

FELIS MTE75-MİX TEK GÖVDE EVİYE BATARYASI

Product Code & Name MTE75 Monoblock Sink Armature

Surface Chrome Features 263

• Special water saving aerator (Bubble flow, with lime breaker), Flow rate:8lt/min.

• Special cartridge with heat and flow rate adjustment • With swivel spout • Length of outlet 192 mm • Height of outlet 263 mm • Measurements of hot & cold water flex hose connection are M10x1- ⅜’’ (or ½’’) 40 cm • Ideal operation pressure 3-4 Bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filtered sub tap at the entrance of the flat is recommended

192

Cartridge Diameter: Ø35

Product Code & Name MAE75 Ø65

Applique Sink Armature

Surface Chrome

140-160

G1/2"

275

Features

• Special water saving aerator (Bubble flow, with lime breaker, Flow rate: 8 lt/min) • Special cartridge with heat and flow rate adjustment • With swivel spout • Length of outlet is 275 mm.

• Armature connection threads are ¾” • Eccentric connection threads are ¾” - ½” • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

Cartridge Diameter: Ø35

NOTES

CATALOGUE

58

From now on, RITMO and ATROS has Cold Start Technology..

What is Cold Start Cartridge Technology?

When the handle is in the middle position, system start working with cold water The more the faucet handle turned left side, user get much more hot water Maximum hot water temperature can be reached only by turning the handle left 90 Ë&#x161; with Cold Start Cartridge; 90Ë&#x161; usage provides best setting of the water temperature sensitivity instead of standart cartridge Cold Start Technology prevents user wasting hot water by operating unnecessary boiler/water heater action Energy saving system, protect nature

TIGRA MODERN LIVES

CATALOGUE

60

CATALOGUE

61

TIGRA Product Code & Name Ø70

MBB110 G1/2''

Bathroom Armature

° 10

Surface Chrome

165

Features

140-160

G 1/2''

• Special water saving aerator (Bubble flow, with lime breaker, Flow rate: 16 lt/min) • Length of outlet 165 mm • Armature connection threads are ¾” • Eccentric connection threads are ¾” - ½” • Spiral Hose connection threads are ½” • Ideal operation pressure 3-4 Bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

Cartridge Diameter: Ø40 MBB110 BANYO BATARYASI

Product Code & Name MDB110 Ø70

Shower Armature 70

Surface Chrome

G 1/2''

Features

140-160

G 1/2''

• Special cartridge with heat and flow rate adjustment • Shower outlet length 70 mm • Armature connection threads are ¾” • Eccentric connection threads are ¾” - ½” • Spiral Hose connection threads are ½” • Ideal operation pressure 3-4 Bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

Cartridge Diameter: Ø40 MDB110 DUŞ BATARYASI

Product Code & Name MLB110 Wash-Basin Armature

86

Surface Chrome Features

• Special water saving aerator (Bubble flow, with lime breaker, Flow rate: 8 lt/min) • Length of outlet 110 mm • Height of outlet 86 mm • Measurements of hot & cold water flex hose connection are M10x1- ⅜’’ (or ½’’) 40 cm • Ideal operation pressure 3-4 Bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filtered sub tap at the entrance of the flat is recommended

110

Cartridge Diameter: Ø40 MLB110 LAVABO BATARYASI

Product Code & Name MTL110 Monoblock Wash-Basin Armature

235

Surface Chrome Features

• Special water saving aerator (Bubble flow, with lime breaker, Flow rate: 8 lt/min) • With swivel spout • Length of outlet 125 mm • Height of outlet 235 mm • Measurements of hot & cold water flex hose connection are M10x1- ⅜’’ (or ½’’) 40 cm • Ideal operation pressure 3-4 Bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filtered sub tap at the entrance of the flat is recommended

125

CATALOGUE

62

MTL110 TEK GÖVDE LAVABO BATARYASI

Cartridge Diameter: Ø40

Energy Saving

Water Saving

Product Code & Name MBD110 Bidet Armature

95

Surface Chrome Features

• Jointed special cascade aerator (Bubble flow, with lime breaker) • Special cartridge with heat and flow rate adjustment • Length of outlet 120 mm • Height of outlet 95 mm • Measurements of hot & cold water flex hose connection are M10x1- ⅜’’ (or ½’’) 40 cm • Ideal operation pressure 3-4 Bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filtered sub tap at the entrance of the flat is recommended

120

Cartridge Diameter: Ø40

Product Code & Name

MBD110 MİX BİDE BATARYASI

MTE110 Monoblock Sink Armature

265

Surface Chrome Features

• Special water saving aerator (Bubble flow, with lime breaker), Flow rate:8lt/min.

• Special cartridge with heat and flow rate adjustment • With swivel spout • Length of outlet 195 mm • Height of outlet 265 mm • Measurements of hot & cold water flex hose connection are M10x1- ⅜’’ (or ½’’) 40 cm • Ideal operation pressure 3-4 Bar • To prevent any damage which can be caused by the contaminants

inside the fittings, a filtered sub tap at the entrance of the flat is recommended

Cartridge Diameter: Ø40

195

MTE110 TEK GÖVDE EVİYE BATARYASI

Product Code & Name Ø65

MAE110 Applique Sink Armature

140-160

G1/2"

275

Surface Chrome Features

• Special water saving aerator (Bubble flow, with lime breaker, Flow rate: 8 lt/min) • Special cartridge with heat and flow rate adjustment • With swivel spout • Length of outlet is 275 mm.

• Armature connection threads are ¾” • Eccentric connection threads are ¾” - ½” • Ideal working pressure is 3-4 bar • To prevent any damage which can be

caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

Cartridge Diameter: Ø40

NOTES

CATALOGUE

63

PROPRIETARY PRODUCT DESIGN

TULIO MODERN LIVES

CATALOGUE

64

CATALOGUE

65

TULIO

PROPRIETARY PRODUCT DESIGN

Product Code & Name MLB135 Wash-Basin Armature

126

Surface Chrome Features

• Special aerator (Bubble flow, with lime breaker, flow rate 8 lt /min) • Lenght of outlet is 115 mm • Height of outlet is 126 mm • Measurements of hot and cold water flex hose connection are M8 x1-⅜” (or ½”)50 cm • Ideal operation pressure 3-4 bar • To prevent any damage which can be caused by the contaminants

115 160

inside the fittings, a filtered interval tap is recommended

Cartridge Diameter: Ø25

Product Code & Name 60

MBB135 G 1/2''

Bathroom Armature

118 160

Surface Chrome Features

140-160

G 1/2"

• Special aerator (Bubble flow, with lime breaker, Flow rate: 16 lt/min) • Special cartridge with heat and flow rate adjustment • Lenght of outlet is 160 mm • Armature connection threads are ¾”, eccentric connection threads are ¾”-½” • Spiral hose connection thread ½” • Ideal operation pressure 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended

Cartridge Diameter: Ø35

Product Code & Name MTE135 Monoblock Sink Armature 270

Surface Chrome Features

202

• Special aerator (Bubble flow, with lime breaker, flow rate 8 lt /min) • With swivel spout • Lenght of outlet is 202 mm • Height of outlet is 270 mm • Measurements of hot and cold water flex hose connection are M10x1-⅜” (or ½”)40 cm • Ideal operation pressure 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filtered interval tap is recommended

Cartridge Diameter: Ø25

CATALOGUE

66

Energy Saving

Water Saving

Product Code & Name MSL135 Over Table Wash-Basin Armature

Surface Chrome Features

• Special aerator (Bubble flow, with lime breaker, flow rate 8 lt /min) • Special cartridge with heat and flow rate adjustment • Long height to be used at over table wash basins • Lenght of outlet is 144 mm • Height of outlet is 260 mm • Measurements of hot and cold water flex hose connection are M10x1-⅜” (or ½”)70 cm • Ideal operation pressure 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filtered interval tap is recommended

Cartridge Diameter: Ø35

NOTES

CATALOGUE

67

PROPRIETARY PRODUCT DESIGN

ATROS MODERN LIVES

CATALOGUE

68

CATALOGUE

69

ATROS

C extension products HAS cold start CAPABILITY

PROPRIETARY PRODUCT DESIGN

G1/2"

Product Code & Name MTA65 Fully Embedded Bathroom Armature

70

• Special cartridge with heat and flow rate adjustment STOCKS LIMITED

MTA65-C Fully Embedded Bathroom Armature

• Cold start cartridge - when the handle is in the middle position, system start with cold water

G 1/2"

Surface Chrome

650

G 3/4"

300

30

Features

125

• Special water saving aerator (Bubble flow, with lime breaker, Flow rate:16lt/min.)

• Compatible with all embedded shower heads and with all handsets • Length of outlet 125 mm • Diverting unit with locking system • Measurement of outlet connection ¾” • Installation under plaster • Ideal working pressure 3-4 Bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

Cartridge Diameter: Ø35

Product Code & Name

G1/2"

MAB65 Embedded Bathroom Armature

• Special cartridge with heat and flow rate adjustment 70

STOCKS LIMITED

MAB65-C Embedded Bathroom Armature

• Cold start cartridge - when the handle is in the middle position, system start with cold water

300

G 1/2"

Surface Chrome Features

650

G 3/4"

30

120

• Special water saving aerator (Bubble flow, with lime breaker, Flow rate:16lt/min.)

• Compatible with all embedded shower heads and with all handsets by using GGR05 • Length of outlet 120 mm • Measurement of outlet connection ¾” • Installation under plaster • Ideal working pressure 3-4 Bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

Cartridge Diameter: Ø35

Product Code & Name

G1/2"

MKB65 Embedded Cabin Armature

• Special cartridge with heat and flow rate adjustment STOCKS LIMITED 70

MKB65-C Embedded Cabin Armature

• Cold start cartridge - when the handle is in the middle position, system start with cold water

30

G 1/2"

650

300

G 1/2"

Surface Chrome Features

• Compatible with all embedded shower heads and with all handsets • Shower outlet length 17,5 mm • Shower outlet wall connection diemension ½” • Shower outlet spiral hose connection diemension ½” • Installation under plaster • Ideal working pressure 3-4 Bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

Cartridge Diameter: Ø35

CATALOGUE

70

Energy Saving 22

Product Code & Name MAD65 Embedded Shower Armature

G1/2"

• Special cartridge with heat and flow rate adjustment STOCKS LIMITED

MAD65-C Embedded Shower Armature

• Cold start cartridge - when the handle is in the middle position, system start with cold water

950

Surface Chrome Features

• Connection size ½” (inlet-outlet) • Compatible with all embedded shower heads and with all handsets by using GGR05 • Installation under plaster • Ideal working pressure 3-4 Bar • To prevent any damage which can be caused

by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

MAD65 ATROS ANKASTRE DUŞ BATARYASI GÜL PRES DÖKÜM SAN A.Ş.

Cartridge Diameter: Ø35

MBB 65 Product Code & Name MBB65 Bathroom Armature

• Special cartridge with heat and flow rate adjustment 66

MBB65-C Bathroom Armature G1/2"

G1/2"

160

• Cold start cartridge - when the handle is in the middle position, system start with cold water

Surface Chrome Features

• Special cascade aerator.

(Bubble flow, with lime breaker, Flow rate:16lt/min) • Diverting unit which has locking system • Length of outlet is 160mm • Armature connection threads are ¾’’ • Eccentric connection threads are ¾’’ – ½’’ • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused

140-160

Water Saving

by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

Cartridge Diameter: Ø35

MDB65-ASTRO DUŞ BATARYASI

Product Code & Name MDB65 Shower Armature

Ø65

• Special cartridge with heat and flow rate adjustment G1/2" 68

140-160

G1/2"

71

MDB65-C Shower Armature

• Cold start cartridge - when the handle is in the middle position, system start with cold water

Surface Chrome Features

• Shower outlet length 68 mm • Armature connection threads are ¾” • Eccentric connection threads are ¾” - ½” • Spiral Hose connection threads are ½” • Ideal operation pressure 3-4 Bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

Cartridge Diameter: Ø35

CATALOGUE

71

ATROS

C extension products HAS cold start CAPABILITY

PROPRIETARY PRODUCT DESIGN

Product Code & Name MAK65 Embedded Bathtub Armature (3 holes)

• Special cartridge with heat and flow rate adjustment

MAK65-C Embedded Bathtub Armature (3 holes)

• Cold start cartridge - when the handle is in the middle position, system start with cold water

Surface Chrome Features

• Special outlet with waterfall flow / Width of outlet 100 mm • Divertor unit to hand shower and to outlet (on the body of outlet) • Hand shower with 5 Functions (Ø120) • Dual-clamp spiral hose 2000 mm • Length of outlet 160 mm - Height of outlet 130 mm • Measurements of hot & cold water flex hose connection are M10x1-½ “ • Ideal operation pressure 3-4 Bar • To prevent any damage which can be caused

130

160

100

100

by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

Cartridge Diameter: Ø35

MAK65-MİX ANKASTRE KÜVET BATARYASI

Product Code & Name MAK66 Embedded Bathtub Armature (4 holes)

• Special cartridge with heat and flow rate adjustment

MAK66-C Embedded Bathtub Armature (4 holes)

• Cold start cartridge - when the handle is in the middle position, system start with cold water

Surface Chrome Features

153 85

59

42 M27x1,5

G 1/2''

120

86

G 1/2''

G 1/2''

120

120

MAK66-ATROS MİX KUVET BAT.(4 DELİKLİ)

• Special outlet with waterfall flow • Width of outlet 105 mm • Divertor unit to hand shower and to outlet • Hand shower with 5 Functions (Ø120) • Dual clamp spiral hose 2000mm • Length of outlet 86 mm • Height of outlet 42 mm • Measurement of hot and cold water flex hose connection M10x1-½”40 cm • Ideal working pressure 3-4 Bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

Cartridge Diameter: Ø35

Product Code & Name MAK67 Embedded Bathtub Armature

42

123

Surface Chrome Features

93 G 1/2"

120

120

• Special cartridge with heat and flow rate adjustment • Special outlet with waterfall flow • Width of outlet is 120 mm • Divertor unit to hand shower and to outlet (on the body of mixer unit) • Hand shower with 5 functions • Dual clamp spiral hose 2000 mm • Lenght of outlet 93 mm • Height of outlet 42 mm • Measurements of hot and cold water flex hose connection are M8 x1-½, 40 cm • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

Cartridge Diameter: Ø40

CATALOGUE

72

Energy Saving

MLB 65

Water Saving

Product Code & Name MLB65 Wash-Basin Armature

• Special cartridge with heat and flow rate adjustment

MLB65-C Wash-Basin Armature

• Cold start cartridge - when the handle is in the middle position, system start with cold water

Surface Chrome 100

Features

• Special water saving cascade aerator.

(Bubble flow, with lime breaker), Flow rate:8lt/min) • Length of outlet is 120mm • Height of outlet is 100mm • Measurements of hot & cold water flex hose connection are M10x1- ⅜’’ (or ½’’) 40 cm • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused by contaminants inside the fittings, a filtered interval tap at the entrance of the flat is recommended.

120

Cartridge Diameter: Ø35

Product Code & Name MTL65 Monoblock Wash-Basin Armature

• Special cartridge with heat and flow rate adjustment

MTL65-C Monoblock Wash-Basin Armature

145

• Cold start cartridge - when the handle is in the middle position, system start with cold water

145

Surface Chrome Features

• Special water saving aerator (Bubble flow, with lime breaker, Flow rate:16lt/min.)

• With swivel spout • Length of outlet 200 mm - Height of outlet 145 mm • Measurement of hot and cold water flex hose connection M10x1- ⅜’’ (or ½’’) 40 cm • Ideal working pressure 3-4 Bar • To prevent any damage which can be caused by the contaminants

200

inside the fittings, a filtered sub tap at the entrance of the flat is recommended

Cartridge Diameter: Ø35

MTL65 ATROS TEK GÖVDE LAVABO BATARYASI GÜL PRES DÖKÜM SAN A.Ş.

Product Code & Name MDA65 Applique Wash-Basin Armature

• Special cartridge with heat and flow rate adjustment

MDA65-C Applique Embedded Wash-Basin Armature

• Cold start cartridge - when the handle is in the middle position, system start with cold water

Surface Chrome Features

• Special aerator (Bubble flow, with lime breaker, flow rate 8 lt /min) • Lenght of outlet is 203 mm • Installation under plaster • Ideal operation pressure 3-4 bar • To prevent any damage which can be caused by the contaminants

200

80

120

128

inside the fittings, a filter at the entrance of the flat is recommended

G 1/2" 34,50 50

67 203

Cartridge Diameter: Ø35

CATALOGUE

73

ATROS Product Code & Name MBR65 Barbershop Armature

• Special cartridge with heat and flow rate adjustment MBR65-C Berber Bataryası

• Cold start cartridge - when the handle is in the middle position, system start with cold water

Surface Chrome 67

Features

• 28x1 special aerator (Bubble flow) • 125 cm meshed spiral hose • Removable ergonomic chrome sliding hand shower • Measurement of hot and cold water flex hose connection M10x1- ⅜’’ (or ½’’) 40 cm • Ideal operation pressure 3-4 Bar • To prevent any damage which can be caused

108

LEAD WEIGHT

by the contaminants inside the fittings, a filtered sub tap at the entrance of the flat is recommended

125cm MESHED SPIRAL HOSE

Cartridge Diameter: Ø35

MTE 65 245

Product Code & Name MTE65 Monoblock Sink Armature

• Special cartridge with heat and flow rate adjustment

MTE65-C Monoblock Sink Armature

• Cold start cartridge - when the handle is in the middle position, system start with cold water

255

Surface Chrome Features

• Special water saving cascade aerator.

(Bubble flow, with lime breaker), Flow rate:8lt/min) • with Swivel Spout • Length of outlet is 245mm • Height of outlet is 255mm • Measurements of hot & cold water flex hose connection are M10x1- ⅜’’ (or ½’’) 40 cm • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused by contaminants inside the fittings, a filtered interval tap at the entrance of the flat is recommended.

Cartridge Diameter: Ø35

Product Code & Name MSL65 Overtable Wash-Basin Armature

• Special cartridge with heat and flow rate adjustment

MSL65-C Overtable Wash-Basin Armature

• Cold start cartridge - when the handle is in the middle position, system start with cold water

Surface Chrome Features

• Special aerator (Bubble flow, with lime breaker, flow rate 8 lt /min) • Long height to be used at over table wash basins • Lenght of outlet is 148 mm • Height of outlet is 248 mm • Measurements of hot and cold water flex hose connection are M10x1-⅜” (or ½”)70 cm • Ideal operation pressure 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filtered interval tap is recommended

Cartridge Diameter: Ø35

CATALOGUE

74

Energy Saving

Water Saving

Product Code & Name MES65 Spiral Nozzle Sink Armature ( 2 Func.)

• Special cartridge with heat and flow rate adjustment

455

MES65-C Spiral Nozzle Sink Armature ( 2 Func.)

• Cold start cartridge - when the handle is in the middle position, system start with cold water

215 215

Surface Chrome Features

• Special water saving aerator (Bubble flow, with lime breaker, Flow rate:16lt/min.)

• Hand shower function switch occurs with opening movement function • Functions can be controlled by turning the key as a 360 degree jointed • With swivel spout • Removable hand shower with 2 Functions • 150 cm flex hose • Length of outlet 215 mm • Height of outlet 215 mm • Measurement of hot and cold water flex hose connection M8x1-⅜” (or ½’’) 50 cm • Ideal working pressure 3-4 Bar • To prevent any damage which can be caused

STOP SLEEVE

SPIRAL HOSE LENGTH 150cm LEAD WEIGHT

by the contaminants inside the fittings, a filtered sub tap at the entrance of the flat is recommended

Cartridge Diameter: Ø35

Product Code & Name MES66 Spiral Nozzle Sink Armature (Single Func.)

455

• Special cartridge with heat and flow rate adjustment

• Cold start cartridge - when the handle is in the middle position, system start with cold water

215

270

MES66-C Spiral Nozzle Sink Armature (Single Func.)

Surface Chrome Features

STOP SLEEVE SPIRAL HOSE LENGTH 150cm LEAD WEIGHT

• Special water saving aerator (Bubble flow, with lime breaker, Flow rate:16lt/min.)

• With swivel spout • Removable hand shower with single function • 150 cm flex hose • Length of outlet 215 mm • Height of outlet 270 mm • Measurement of hot and cold water flex hose connection M8x1-⅜” (or ½’’) 50 cm • Ideal working pressure 3-4 Bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filtered sub tap at the entrance of the flat is recommended

Cartridge Diameter: Ø35

Product Code & Name MAE65 Ø65

Applique Sink Armature

140-160

G1/2"

275

Surface Chrome Features

• Special water saving aerator (Bubble flow, with lime breaker, Flow rate: 8 lt/min) • With swivel spout • Length of outlet is 275 mm.

• Armature connection threads are ¾” • Eccentric connection threads are ¾” - ½” • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

Cartridge Diameter: Ø35

CATALOGUE

75

KALIPSO PRACTICAL SOLUTIONS

CATALOGUE

76

CATALOGUE

77

KALIPSO Product Code & Name

G1/2"

MTA20

STOCKS LIMITED

70

Fully Embedded Bathroom Armature

Surface Chrome Features

• Special aerator (Bubble flow, with lime breaker, Flow rate: 16 lt/min) • Special cartridge with heat and flow rate adjustment • Can be used both with embedded shower heads and hand showers • Lenght of outlet is 125 mm • Diverting unit with locking system • Measurement of outlet connection ¾” • Installation under plaster • Ideal working pressure 3-4 bar • To prevent any damage which can be caused

G 1/2" C

M

CM

30

300

Y

MY

CY

CMY

650

G 3/4"

K

G 1/2" 125

by the contaminants inside the fittings, a filter at the entrance of the flat is recommended

Cartridge Diameter: Ø40

G1/2"

Product Code & Name MAB20

70

Embedded Bathroom Armature

Surface Chrome Features

G 1/2" C

M

30

300

Y

CM

STOCKS LIMITED

MY

CY

CMY

650

G 3/4"

K

120

• Special aerator (Bubble flow, with lime breaker, Flow rate: 16 lt/min) • Special cartridge with heat and flow rate adjustment • Can be used both with embedded shower heads and with all handsets by using GGR05 • Lenght of outlet is 120 mm • Measurement of outlet connection ¾” • Installation under plaster • Ideal working pressure 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended

Cartridge Diameter: Ø40

Product Code & Name 70

MKB20

STOCKS LIMITED

Embedded Cabin Armature

Surface Chrome 300

Features

• Special cartridge with heat and flow rate adjustment • Can be used both with embedded shower heads and hand showers • Lenght of outlet is 17,5 mm • Measurement of outlet connection ½” • Measurement of shower outlet spiral hose connection ½” • Installation under plaster • Ideal working pressure 3-4 bar • To prevent any damage which can be caused by the contaminants

650

inside the fittings, a filter at the entrance of the flat is recommended

CATALOGUE

78

MKB20 KALİPSO ANKASTRE KABİN BATARYASI

Cartridge Diameter: Ø40

Energy Saving

Water Saving

Product Code & Name MYB20 Ø65

Semi Embedded Bathroom Armature

75

Surface Chrome Features 130

140-160

G1/2"

160

• Special aerator with water saving (Bubble flow, with lime breaker, Flow rate: 16 lt/min) • Special cartridge with heat and flow rate adjustment • Semi embedded connection group unit • Length of outlet is 160 mm • Armature connection threads are ¾” • Eccentric connection threads are ¾” - ½” • Spiral hose connection threads are ½” • Ideal operation pressure is 3 - 4 Bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

Cartridge Diameter: Ø40

Product Code & Name MBB20 Bathroom Armature

Surface Chrome Features

• Special aerator with water saving (Bubble flow, with lime breaker, Flow rate: 16 lt/min) • Special cartridge with heat and flow rate adjustment • Length of outlet is 160 mm • Armature connection threads are ¾” • Eccentric connection threads are ¾” - ½” • Spiral hose connection threads are ½” • Ideal operation pressure is 3 - 4 Bar • To prevent any damage which can be caused

by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

Cartridge Diameter: Ø40

Product Code & Name MDB20 Shower Armature Ø65

Surface Chrome Features

G1/2"

70

G 1/2''

• Special cartridge with heat and flow rate adjustment • Shower outlet length is 70 mm • Armature connection threads are ¾” • Eccentric connection threads are ¾” - ½” • Spiral hose connection threads are ½” • Ideal operation pressure is 3 - 4 Bar • To prevent any damage which can be caused

140-160

by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

Cartridge Diameter: Ø40

MBB20 KALİPSO DUŞ BATARYASI

CATALOGUE

79

KALIPSO Product Code & Name MLB20 Wash-Basin Armature

Surface Chrome Features 70

15°

• Special water saving aerator (Bubble flow, with lime breaker, Flow rate: 8 lt/min) • Special cartridge with heat and flow rate adjustment • Length of outlet is 140 mm • Height of outlet is 70 mm • Measurements of Hot & Cold water flex hose connection are M10x1- ⅜’’ (or ½’’) 40 cm • Ideal operation pressure is 3 - 4 Bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filtered interval tap at the entrance of the flat is recommended.

140

Cartridge Diameter: Ø40

MLB20 MİX KALİPSO LAVABO BATARYASI

Product Code & Name MDL20 Swivel Wash-Basin Armature

95

Surface Chrome

160

Features

• Special water saving aerator (Bubble flow, with lime breaker, Flow rate: 8 lt/min) • Special cartridge with heat and flow rate adjustment • With swivel spout • Length of outlet is 160 mm • Height of outlet is 95 mm • Measurements of Hot & Cold water flex hose connection are M10x1- ⅜’’ (or ½’’) 40 cm • Ideal operation pressure is 3 - 4 Bar • To prevent any damage which can be caused

by the contaminants inside the fittings, a filtered interval tap at the entrance of the flat is recommended.

Cartridge Diameter: Ø40 MDL 20 KALİPSO DÖNER LAVABO BATARYASI

Product Code & Name MTL20 Monoblock Wash-Basin Armature

Surface Chrome Features 180

125

• Special water saving aerator (Bubble flow, with lime breaker, Flow rate: 8 lt/min) • Special cartridge with heat and flow rate adjustment, With swivel spout • Length of outlet is 125 mm • Height of outlet is 180 mm • Measurements of Hot & Cold water flex hose connection are M10x1- ⅜’’ (or ½’’) 40 cm • Ideal operation pressure is 3 - 4 Bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filtered interval tap at the entrance of the flat is recommended.

Cartridge Diameter: Ø40

MTL 20 KALİPSO TEK GÖVDE LAVABO BATARYASI

CATALOGUE

80

Energy Saving

Water Saving

Product Code & Name MAL20 65

Applique Wash-Basin Armature

Surface Chrome Features

230

140-160

G 1/2"

• Special aerator (Bubble flow, with lime breaker, flow rate 8 lt /min) • Special cartridge with heat and flow rate adjustment • With swivel spout • Lenght of outlet is 230 mm • Armature connection threads are ¾” • Eccentric connection threads are ¾”-½” • Ideal working pressure 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended

Cartridge Diameter: Ø40

Product Code & Name MLT20 Single Entrance Wash-Basin Armature

70

15°

140

Surface Chrome Features

• Special water saving aerator ( Bubble flow, with lime breaker, Flow rate: 8 lt/min) • Length of outlet is 140 mm • Height of outlet is 70 mm • Measurements of single entrance flex hose connection are ½’’- ⅜’’ (or ½’’-½’’) 40 cm • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filtered interval tap at the entrance of the flat is recommended.

Cartridge Diameter: Ø40

MLT 20 KALİPSO TEK GİRİŞLİ LAVABO

Product Code & Name MBD20 Bidet Armature

Surface Chrome

75

Features

• Pin jointed, Special water saving aerator (for frothy flow and with de-scaling, flow rate: 8lt/min) • Special cartridge with heat and flow rate adjustment • Length of outlet is 125 mm - Height of outlet is 75 mm • Measurements of Hot & Cold water flex hose connection are M10x1- ⅜’’ (or ½’’) 40 cm • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filtered interval tap at the entrance of the flat is recommended.

125

MBD20 KALİPSO BİDE BATARYASI

Cartridge Diameter: Ø40

CATALOGUE

81

KALIPSO Product Code & Name MTE20 Monoblock Sink Armature

Surface Chrome Features

230

200

• Special water saving aerator (Bubble flow, with lime breaker, Flow rate: 8 lt/min) • Special cartridge with heat and flow rate adjustment • With swivel spout • Length of outlet is 200 mm • Height of outlet is 230 mm • Measurements of Hot & Cold water flex hose connection are M10x1- ⅜’’ (or ½’’) 40 cm • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filtered interval tap at the entrance of the flat is recommended.

Cartridge Diameter: Ø40 MTE 20 KALİPSO TEK GÖVDE EVİYE BATARYASI

Product Code & Name MEB20 Swivel Sink Armature

Surface Chrome Features

• Special water saving aerator (Bubble flow, with lime breaker, Flow rate: 8 lt/min) • Special cartridge with heat and flow rate adjustment • With swivel spout • Length of outlet is 220 mm • Height of outlet is 155 mm • Measurements of Hot & Cold water flex hose connection are M10x1- ⅜’’ (or ½’’) 40 cm • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filtered interval tap at the entrance of the flat is recommended.

MDL 20 KALİPSO DÖNER EVİYE BATARYASI

Cartridge Diameter: Ø40

Product Code & Name MES20 Helical Sink Armature

Surface Chrome Features

• Special aerator with water saving (Bubble flow, with lime breaker, Flow rate: 8 lt/min) • Special cartridge with heat and flow rate adjustment • With swivel spout • Removable hand shower head with 2 Functions (Rain, Straight flow) • Length of outlet is 225 mm • 125 cm helical hose • Height of outlet is 140 mm • Measurements of Hot & Cold water flex hose connection are M10x1- ⅜’’ (or ½’’) 40 cm • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filtered interval tap at the entrance of the flat is recommended.

Cartridge Diameter: Ø40 MES 20 MİX KALİPSO SPİRALLİ EVİYE BATARYASI

CATALOGUE

82

Energy Saving

Water Saving

Product Code & Name MAE20 Applique Sink Armature

Surface Chrome Features 275

• Special water saving aerator (Bubble flow, with lime breaker, Flow rate: 8 lt/min) • Special cartridge with heat and flow rate adjustment • With swivel spout • Length of outlet is 275 mm.

• Armature connection threads are ¾” • Eccentric connection threads are ¾” - ½” • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

Cartridge Diameter: Ø40

MAE20 - KALİPSO MİX APLİKE EVİYE BATARYASI

NOTES

CATALOGUE

83

FLAMENGO PRACTICAL SOLUTIONS

CATALOGUE

84

CATALOGUE

85

FLAMENGO Product Code & Name MTA10

STOCKS LIMITED

70

Fully Embedded Bathroom Armature

Surface Chrome Features

650

300

• Special aerator (Bubble flow, with lime breaker, Flow rate: 16 lt/min) • Special cartridge with heat and flow rate adjustment • Can be used both with embedded shower heads and hand showers • Lenght of outlet is 125 mm • Diverting unit with locking system • Measurement of outlet connection ¾” • Installation under plaster • Ideal working pressure 3-4 bar • To prevent any damage which can be caused by the contaminants 125

inside the fittings, a filter at the entrance of the flat is recommended

Cartridge Diameter: Ø40

MAB 10 FLAMENGO ANKASTRE BANYO BATARYASI

Product Code & Name MAB10

STOCKS LIMITED

70

Embedded Bathroom Armature

Surface Chrome

650

300

Features

120

MAB10 FLAMENGO ANKASTRE BANYO BATARYASI

• Special aerator (Bubble flow, with lime breaker, Flow rate: 16 lt/min) • Special cartridge with heat and flow rate adjustment • Can be used both with embedded shower heads and with all handsets by using GGR05 • Lenght of outlet is 120 mm • Measurement of outlet connection ¾” • Installation under plaster • Ideal working pressure 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended

Cartridge Diameter: Ø40

Product Code & Name 70

MKB10

STOCKS LIMITED

Embedded Cabin Armature

650

300

Surface Chrome Features

• Special cartridge with heat and flow rate adjustment • Can be used both with embedded shower heads and hand showers • Lenght of outlet is 17,5 mm • Measurement of outlet connection ½” • Measurement of shower outlet spiral hose connection ½” • Installation under plaster • Ideal working pressure 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended

Cartridge Diameter: Ø40 MKB10 FLAMENGO ANKASTRE KABİN BATARYASI

CATALOGUE

86

Energy Saving

Water Saving

Product Code & Name MYB10 Ø65

Semi Embedded Bathroom Armature

75

Surface Chrome Features

• Special aerator with water saving (Bubble flow, with lime breaker, Flow rate: 16 lt/min) • Special cartridge with heat and flow rate adjustment • Semi embedded connection hose group unit • Length of outlet is 160 mm • Armature connection threads are ¾” • Eccentric connection threads are ¾” - ½” • Spiral hose connection threads are ½” • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused

130

140-160

G1/2"

160

by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

Cartridge Diameter: Ø40

Product Code & Name MBB10 Bathroom Armature

Surface Chrome Features

• Special aerator with water saving (Bubble flow, with lime breaker, Flow rate: 16 lt/min) • Special cartridge with heat and flow rate adjustment • Length of outlet is 160 mm • Armature connection threads are ¾” • Eccentric connection threads are ¾” - ½” • Spiral hose connection threads are ½” • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused

by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

Cartridge Diameter: Ø40

Product Code & Name MDB10 Shower Armature Ø65

Surface Chrome G 1/2''

140-160

G1/2"

70

Features

• Special cartridge with heat and flow rate adjustment • Shower outlet length is 70 mm • Armature connection threads are ¾” • Eccentric connection threads are ¾” - ½” • Spiral hose connection threads are ½” • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

Cartridge Diameter: Ø40 MBB10 FLAMENGO DUŞ BATARYASI

CATALOGUE

87

FLAMENGO Product Code & Name MLB10 Wash-Basin Armature

Surface Chrome Features 70

15°

• Special aerator with water saving (Bubble flow, with lime breaker, Flow rate: 8 lt/min) • Special cartridge with temperature and flow adjustment • Length of outlet is 140 mm • Height of outlet 70 mm • Measurements of Hot & Cold water flex hose connection are M10x1- ⅜’’ (or ½’’) 40 cm • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filtered interval tap at the entrance of the flat is recommended.

140

Cartridge Diameter: Ø40

Product Code & Name MDL10 Swivel Wash-Basin Armature

Surface Chrome

95

Features SINK

160

• Special aerator with water saving (Bubble flow, with lime breaker, Flow rate: 8 lt/min) • Special cartridge with temperature and flow adjustment • With swivel spout • Length of outlet is 160 mm • Height of outlet 95 mm • Measurements of Hot & Cold water flex hose connection are M10x1- ⅜’’ (or ½’’) 40 cm • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filtered interval tap at the entrance of the flat is recommended.

Cartridge Diameter: Ø40

Product Code & Name MTL10 Monoblock Wash-Basin Armature

Surface Chrome Features 180

125

• Special aerator with water saving (Bubble flow, with lime breaker, Flow rate: 8 lt/min) • Special cartridge with heat and flow rate adjustment • With swivel spout • Length of outlet is 125 mm • Height of outlet 180 mm • Measurements of Hot & Cold water flex hose connection are M10x1- ⅜’’ (or ½’’) 40 cm • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filtered interval tap at the entrance of the flat is recommended.

Cartridge Diameter: Ø40 MTL 10 FLAMENGO TEK GÖVDE LAVABO BATARYASI

CATALOGUE

88

Energy Saving

Water Saving

Product Code & Name MAL10 Applique Wash-Basin Armature 65

Surface Chrome Features

230

140-160

G 1/2"

• Special aerator (Bubble flow, with lime breaker, flow rate 8 lt /min) • Special cartridge with heat and flow rate adjustment • With swivel spout • Lenght of outlet is 230 mm • Armature connection threads are ¾”, • Eccentric connection threads are ¾”-½” • Ideal working pressure 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended

Cartridge Diameter: Ø40

Product Code & Name MLT10 Single Entrance Wash-Basin Armature

Surface Chrome Features

• Special water saving aerator (Bubble flow, with lime breaker, Flow rate:8lt/min.)

• Length of outlet is 140 mm • Height of outlet is 70 mm • Measurement of cold water flex hose connection ½-⅜” (or ½- ½”) 40 cm • Ideal working pressure 3-4 Bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filtered sub tap at the entrance of the flat is recommended

Cartridge Diameter: Ø40

Product Code & Name MBD10 Bidet Armature

Surface Chrome

75

Features

125

• Pin jointed, special aerator with water saving (Bubble flow, with lime breaker, Flow rate: 8 lt/min) • Special cartridge with heat and flow rate adjustment • Length of outlet is 125 mm • Height of outlet 75 mm • Measurements of Hot & Cold water flex hose connection are M10x1- ⅜’’ (or ½’’) 40 cm • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filtered interval tap at the entrance of the flat is recommended.

Cartridge Diameter: Ø40

MBD10 FLAMENGO BİDE BATARYASI

CATALOGUE

89

FLAMENGO Product Code & Name MTE10 Monoblock Sink Armature

Surface Chrome Features 230

200

• Special aerator with water saving (Bubble flow, with lime breaker, Flow rate: 8 lt/min) • Special cartridge with heat and flow rate adjustment • With swivel spout • Length of outlet is 200 mm • Height of outlet 230 mm • Measurements of Hot & Cold water flex hose connection are M10x1- ⅜’’ (or ½’’) 40 cm • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filtered interval tap at the entrance of the flat is recommended.

Cartridge Diameter: Ø40 MTE 10 FLAMENGO TEK GÖVDE EVİYE BATARYASI

Product Code & Name MEB10 Swivel Sink Armature

Surface Chrome Features

• Special aerator with water saving (Bubble flow, with lime breaker, Flow rate: 8 lt/min) • Special cartridge with heat and flow rate adjustment • With swivel spout • Length of outlet is 220 mm • Height of outlet 155 mm • Measurements of Hot & Cold water flex hose connection are M10x1- ⅜’’ (or ½’’) 40 cm • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filtered interval tap at the entrance of the flat is recommended.

Cartridge Diameter: Ø40

MDL10 FLAMENGO DÖNER EVİYE BATARYASI

Product Code & Name MES10 Helical Sink Armature

Surface Chrome Features

• Special aerator with water saving (Bubble flow, with lime breaker, Flow rate: 8 lt/min) • Special cartridge with temperature and flow adjustment • With swivel spout • Removable hand held shower head with 2 Functions (Rain, Straight flow) • Outlet end length 225 mm • 125 cm helical hose • Height of outlet 140 mm • Measurements of Hot & Cold water flex hose connection are M10x1- ⅜’’ (or ½’’) 40 cm • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused

STOP SLEEVE

SPIRAL HOSE LENGTH :125cm LEAD WEIGHT

by the contaminants inside the fittings, a filtered interval tap at the entrance of the flat is recommended.

Cartridge Diameter: Ø40

CATALOGUE

90

Energy Saving

Water Saving

Product Code & Name MAE10 Applique Sink Armature

Surface Chrome 275

Features

• Special aerator with water saving (Bubble flow, with lime breaker, Flow rate: 8 lt/min) • Special cartridge with heat and flow rate adjustment • With swivel spout • Length of outlet is 275 mm • Armature connection threads are ¾” • Eccentric connection threads are ¾” – ½” • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

Cartridge Diameter: Ø40 MAE10 - FLAMENGO MİX APLİKE EVİYE BATARYASI

NOTES

CATALOGUE

91

ESPINA PRACTICAL SOLUTIONS

CATALOGUE

92

CATALOGUE

93

ESPINA Product Code & Name MTA70

STOCKS LIMITED

Fully Embedded Bathroom Armature 70

Surface Chrome

650

300

Features

125

• Special aerator (Bubble flow, with lime breaker, Flow rate: 16 lt/min) • Special cartridge with heat and flow rate adjustment • Can be used both with embedded shower heads and hand showers • Lenght of outlet is 125 mm • Diverting unit with locking system • Measurement of outlet connection ¾” • Installation under plaster • Ideal working pressure 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended

Cartridge Diameter: Ø40 MAB 70 ESPİNA ANKASTRE BANYO BATARYASI

G1/2"

Product Code & Name MAB70

STOCKS LIMITED

70

Embedded Bathroom Armature

Surface Chrome Features

G 1/2" C

300

M

Y

CM

30

MY

CY

CMY

G 3/4"

650

K

120

• Special aerator (Bubble flow, with lime breaker, Flow rate: 16 lt/min) • Special cartridge with heat and flow rate adjustment • Can be used both with embedded shower heads and with all handsets by using GGR05 • Lenght of outlet is 120 mm • Measurement of outlet connection ¾” • Installation under plaster • Ideal working pressure 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended

Cartridge Diameter: Ø40

Product Code & Name

G1/2"

MKB70

STOCKS LIMITED

Embedded Cabin Armature 70

Surface Chrome Features

G 1/2" M

Y

CM

300

C

30

MY

CY

CMY

G 1/2"

650

K

• Special cartridge with heat and flow rate adjustment • Can be used both with embedded shower heads and hand showers • Lenght of outlet is 17,5 mm • Measurement of outlet connection ½” • Measurement of shower outlet spiral hose connection ½” • Installation under plaster • Ideal working pressure 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended

Cartridge Diameter: Ø40

CATALOGUE

94

Energy Saving

Water Saving

Product Code & Name Ø65

MBB70 Bathroom Armature

10° G 1/2''

Surface Chrome

165

Features G 1/2 ''

• Special aerator with water saving (Bubble flow, with lime breaker, Flow rate: 16 lt/min) • Special cartridge with heat and flow rate adjustment • Diverting unit which has locking system • Length of outlet is 165 mm • Armature connection threads are ¾” • Eccentric connection threads are ¾” - ½” • Spiral hose connection thread ½”- Ideal working pressure is 3-4 bar • To prevent any damage which can be caused

140-160

by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

Cartridge Diameter: Ø40

Product Code & Name Ø65

MDB70 Shower Armature 60

G1/2"

Surface Chrome

G 1/2 ''

Features

140-160

• Special aerator (Bubble flow, with lime breaker) • Special cartridge with heat and flow rate adjustment • Shower outlet length is 60 mm • Armature connection threads are ¾” • Eccentric connection threads are ¾” - ½” • Spiral hose connection thread ½” • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

Cartridge Diameter: Ø40 MDB70 ESPİNA DUŞ BATARYASI

MTK70-ESPİNA TEK DELİKLİ KÜVET BATARYASI

Product Code & Name MTK70 Monoblock Bathtub Armature

Surface Chrome Features 14 °

90 144

66

G1/2"

• M28x1 special aerator which provides flow with high flow rate (Bubble flow, with lime breaker) • Special cartridge with heat and flow rate adjustment • Measurement of hand shower spiral hose connection ½” • Length of outlet 144 mm • Height of outlet 66 mm • Measurements of hot & cold water flex hose connection are M10x1- ½ “ 40 cm • Ideal operation pressure 3-4 Bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filtered sub tap at the entrance of the flat is recommended

Cartridge Diameter: Ø40

CATALOGUE

95

ESPINA Product Code & Name MLB70 Wash-Basin Armature

Surface Chrome Features 70

10 °

SINK

• Special aerator with water saving (Bubble flow, with lime breaker, Flow rate: 8 lt/min) • Special cartridge with heat and flow rate adjustment • Length of outlet is 122 mm • Height of outlet 70 mm • Measurements of Hot & Cold water flex hose connection are M10x1- ⅜’’ (or ½’’) 40 cm • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filtered interval tap at the entrance of the flat is recommended.

122

Cartridge Diameter: Ø40

BU RESIM GUL PRES DOKUM SANAYI A.S. NIN MALIDIR. IZINSIZ KOPYALANAMAZ. ÜÇÜNCÜ KISILERE VERILEMEZ . BASKA MAKSATLA KULLANILAMAZ HER HAKKI SAKLIDIR.

Product Code & Name MTL70 Monoblock Wash-Basin Armature

Surface Chrome 140

Features 170

• Special aerator with water saving (Bubble flow, with lime breaker, Flow rate: 8 lt/min) • Special cartridge with heat and flow rate adjustment • With swivel spout • Length of outlet is 140 mm • Height of outlet 170 mm • Measurements of Hot & Cold water flex hose connection are M10x1- ⅜’’ (or ½’’) 40 cm • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filtered interval tap at the entrance of the flat is recommended.

Cartridge Diameter: Ø40 MTL70 MİX ESPİNA TEK GÖVDE LAVABO BATARYASI

FR-FM-01-003

RESIM ÜZERINDEN ÖLÇÜ ALMAYINIZ

REVIZYON NO:0

YAYIN TARIHI:01/01/2003

Product Code & Name MSL70 Over Table Wash-Basin Armature

Surface Chrome

10°

Features 275

150

• Special aerator with water saving (Bubble flow, with lime breaker, Flow rate: 8 lt/min) • Special cartridge with heat and flow rate adjustment • Long height to be used at Over Table Wash-Basins • Length of outlet is 150 mm • Height of outlet 275 mm • Measurements of Hot & Cold water flex hose connection are M10x1- ⅜’’ (or ½’’) 40 cm • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filtered interval tap at the entrance of the flat is recommended.

Cartridge Diameter: Ø40 MSL70 ESPİNA SETÜSTÜ LAVABO BATARYASI

CATALOGUE

96

Energy Saving

Water Saving

Product Code & Name MBD70 Bidet Armature

Surface Chrome Features 75

• Special aerator with water saving (Bubble flow, with lime breaker, Flow rate: 8 lt/min) • Special cartridge with heat and flow rate adjustment • Length of outlet is 110 mm • Height of outlet 75 mm • Measurements of Hot & Cold water flex hose connection are M10x1- ⅜’’ (or ½’’) 40 cm • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filtered interval tap at the entrance of the flat is recommended.

Cartridge Diameter: Ø40

MBD70 ESPİNA MİX BİDE BATARYASI

Product Code & Name MTE70 Monoblock Sink Armature

Surface Chrome 195

Features

275

• Special aerator with water saving (Bubble flow, with lime breaker, Flow rate: 8 lt/min) • Special cartridge with heat and flow rate adjustment • With swivel spout • Length of outlet is 195 mm • Height of outlet 275 mm • Measurements of Hot & Cold water flex hose connection are M10x1- ⅜’’ (or ½’’) 40 cm • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused

by the contaminants inside the fittings, a filtered interval tap at the entrance of the flat is recommended.

Cartridge Diameter: Ø40

MTE70 MİX ESPİNA TEK GÖVDE EVİ.BAT.

Product Code & Name MAR70 Sink Armature with Outlet connection Of Water Purifying Device

Surface Chrome 215

353

215

Features

• Special aerator preventing the water coming from installation (Bubble flow, with lime breaker, Flow rate:8lt/min.)

• Refinement control 90° ceramic stemmer • Special cartridge with heat and flow rate adjustment • With swivel spout • Length of outlet 215 mm • Height of outlet 215 mm • Measurement of hot and cold water flex hose connection M8x1-⅜”(or ½”) 50 cm • Ideal operation pressure 3-4 Bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filtered sub tap at the entrance of the flat is recommended

Cartridge Diameter: Ø35

CATALOGUE

97

ESPINA Product Code & Name MES70 Helical Sink Armature

210

Surface Chrome Features

220

• Special aerator with water saving (Bubble flow, with lime breaker, Flow rate: 8 lt/min) • Special cartridge with heat and flow rate adjustment • With swivel spout • Removable hand shower head with 2 Functions (Rain, Straight flow) • Length of outlet is 220 mm • Height of outlet 210 mm • 125 cm helical hose (brass) • Measurements of Hot & Cold water flex hose connection are M10x1- ⅜’’ (or ½’’) 40 cm • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filtered interval tap at the entrance of the flat is recommended.

Cartridge Diameter: Ø40

Product Code & Name MAE70 Ø65

Applique Sink Armature

140-160

G1/2"

275

Surface Chrome Features

• Special water saving aerator (Bubble flow, with lime breaker, Flow rate: 8 lt/min) • Special cartridge with heat and flow rate adjustment • With swivel spout • Length of outlet is 275 mm.

• Armature connection threads are ¾” • Eccentric connection threads are ¾” - ½” • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

Cartridge Diameter: Ø40

Product Code & Name

G1/2"

TMS70 ESPİNA TAHARAT MUSLUK

TMS70

TMS70-2

Interval Tap

Interval Tap

Surface Chrome Features

• 90° ceramic stemmer with turning on/off angle • Rosette diameter is Ø55 mm • Suitable size for ⅜” connection • Tap – wall connection size is ½”

Features

• 90° ceramic stemmer with turning on/off angle • Rosette diameter is Ø55 mm • Suitable size for ½” connection • Tap – wall connection size is ½”

Product Code & Name AAK70 Embedded Interval Stop Valve

A.A

24

Surface Chrome Features

Ø70

50

G 1/2"

G 1/2"

105

CATALOGUE

98

• 90° ceramic stemmer • Block under plaster • It can be used as interval tap on suspended closets with concealed interval pipes • Rosette diameter is Ø70 mm • Tap – wall connection size is ½”

Energy Saving

Water Saving

Product Code & Name A.A

AAK70-A

24

G 1/2"

Embedded Interval Stop Valve

50

Ø70

Surface PVD Coating (Gold Effect) Features

• Block under plaster • 90 ˚ Ceramic stemmer • Can be used as interval tap for suspended closets with concealed interval pipes • Rosette diameter ø70 mm • Tap-wall connection ½”

G 1/2"

105

Product Code & Name AAK71 A.A

Embedded Interval Stop Valve ½”

24

50

Ø70

G 1/2"

G 1/2" 69.5 101.5

Surface Chrome Features

• Flywheel diameter Ø50 mm • 90° ceramic stemmer • Block under plaster • Can be used as interval tap on suspended closets with concealed interval pipes • Rosette diameter Ø70 mm • Tap-wall connection ½” Product Code & Name

A.A

AAK71-A

24

Embedded Interval Stop Valve ½”

G 1/2"

50

Ø70

Surface PVD Coating (Gold Effect) Features

G 1/2" 69.5 101.5

• Block under plaster • 90 ˚ Ceramic stemmer • Can be used as interval tap for suspended closets with concealed interval pipes • Flywheel diameter ø 50 mm • with plaster protection cover • Rosette diameter ø70 mm • Tap-wall connection ½” Product Code & Name AAK72

A.A 30

Embedded Interval Stop Valve ¾”

55

Ø70

G 3/4"

G 3/4" 72 104

Surface Chrome Features

• Flywheel diameter Ø50 mm • 90° ceramic stemmer • Block under plaster • Can be used as interval tap on suspended closets with concealed interval pipes • Rosette diameter Ø70 mm • Tap-wall connection ¾” Product Code & Name AAK74 Embedded Interval Stop Valve ( PP-R body- setting wheel )

Surface Chrome Features

• 90 ˚ ceramic stemmer • PP-R body , suitable to connect directly to installation • Can be used as interval tap for suspended closets with concealed interval pipes • Adjustable by turning the system from the plaster distance CATALOGUE

99

SOLUS PRACTICAL SOLUTIONS

CATALOGUE

100

CATALOGUE

101

SOLUS Product Code & Name

G1/2"

MTA55

STOCKS LIMITED

70

Fully Embedded Bathroom Armature

Surface Chrome Features

G 1/2"

G 3/4"

650

300

30

125

• Special water saving aerator (Bubble flow, with lime breaker, Flow rate:16lt/min.)

• Special cartridge with heat and flow rate adjustment • Compatible with all embedded shower heads and with all handsets • Length of outlet 125 mm • Diverting unit with locking system • Measurement of outlet connection ¾” • Installation under plaster • Ideal working pressure 3-4 Bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

Cartridge Diameter: Ø35

G1/2"

Product Code & Name MAB55

STOCKS LIMITED

70

Embedded Bathroom Armature

Surface Chrome Features

300

G 1/2"

650

G 3/4"

30

120

• Special water saving aerator (Bubble flow, with lime breaker, Flow rate:16lt/min.)

• Special cartridge with heat and flow rate adjustment • Compatible with all embedded shower heads and with all handsets by using GGR05 • Length of outlet 120 mm • Measurement of outlet connection ¾” • Installation under plaster • Ideal working pressure 3-4 Bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

Cartridge Diameter: Ø35

Product Code & Name G1/2"

MKB55

STOCKS LIMITED

Embedded Cabin Armature 70

Surface Chrome Features

CATALOGUE

102

30

G 1/2"

650

300

G 1/2"

• Special cartridge with heat and flow rate adjustment • Compatible with all embedded shower heads and with all handsets • Shower outlet length 17,5 mm • Shower outlet wall connection diemension ½” • Shower outlet spiral hose connection diemension ½” • Installation under plaster • Ideal working pressure 3-4 Bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

Cartridge Diameter: Ø35

Energy Saving

Water Saving

Product Code & Name MAD55

22

STOCKS LIMITED

Embedded Shower Armature G1/2"

Surface Chrome Features

• Connection diemension ½” (inlet-outlet) • Special cartridge with heat and flow rate adjustment • Compatible with all embedded shower heads and with all handsets by using GGR05 • Installation under plaster • Ideal working pressure 3-4 Bar • To prevent any damage which can be caused

950

by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

Cartridge Diameter: Ø35

MBB 55 Product Code & Name MBB55 Ø70

Bathroom Armature G1/2" 160

Surface Chrome Features

• Special cascade aerator.

(Bubble flow, with lime breaker, Flow rate:16lt/min.)

• Special cartridge with heat and flow rate adjustment • Length of outlet is 160mm • Armature connection threads are ¾’’ • Eccentric connection threads are ¾’’ – ½’’ • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused

140-160

G1/2"

by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

Cartridge Diameter: Ø35

MDB55-MİX DUŞ BATARYASI

Product Code & Name 70

MDB55 Shower Armature G1/2" 57,5

140-160

G1/2"

62,5

Surface Chrome Features

• Special cartridge with heat and flow rate adjustment • Shower outlet length 57,5 mm • Armature connection threads are ¾” • Eccentric connection threads are ¾” - ½” • Spiral Hose connection threads are ½” • Ideal operation pressure 3-4 Bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

Cartridge Diameter: Ø35

CATALOGUE

103

SOLUS

MLB 55

Product Code & Name MLB55 Wash-Basin Armature

Surface Chrome 80

Features

• Special water saving cascade aerator.

(Bubble flow, with lime breaker), Flow rate:8lt/min) • Special cartridge with heat and flow rate adjustment • Length of outlet is 110mm • Height of outlet is 80mm • Measurements of hot & cold water flex hose connection are M10x1- ⅜’’ (or ½’’) 40 cm • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused by contaminants inside the fittings, a filtered interval tap at the entrance of the flat is recommended.

110

Cartridge Diameter: Ø35

Product Code & Name MTL55 Monoblock Wash-Basin Armature

Features

• Jointed, special water saving aerator (Bubble flow, with lime breaker, Flow rate:8lt/min.)

• Special cartridge with heat and flow rate adjustment • With swivel spout and swivel head outlet • Length of outlet 128-141 mm • Height of outlet 170-175 mm • Measurement of hot and cold water flex hose connection M10x1- ⅜’’ (or ½’’) 40 cm • Ideal working pressure 3-4 Bar • To prevent any damage which can be caused

170

175

277

Surface Chrome

128 141

by the contaminants inside the fittings, a filtered sub tap at the entrance of the flat is recommended

Cartridge Diameter: Ø35

MTE 55

Product Code & Name MTE55 Monoblock Sink Armature

Surface Chrome 175 188

205

200

Features

• Articulated, special water saving cascade aerator.

(Bubble flow, with lime breaker), Flow rate:8lt/min) • Special cartridge with heat and flow rate adjustment • with Swivel Spout • Length of outlet is 175-188mm • Height of outlet is 200-205mm • Measurements of hot & cold water flex hose connection are M10x1- ⅜’’ (or ½’’) 40 cm • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused by contaminants inside the fittings, a filtered interval tap at the entrance of the flat is recommended.

Cartridge Diameter: Ø35

CATALOGUE

104

Energy Saving

Water Saving

Product Code & Name MAE55 Applique Sink Armature

140-160

G 1/2"

Ø70

Surface Chrome 275

Features

• Special water saving aerator (Bubble flow, with lime breaker, Flow rate: 8 lt/min) • Special cartridge with heat and flow rate adjustment • With swivel spout • Length of outlet is 275 mm.

• Armature connection threads are ¾” • Eccentric connection threads are ¾” - ½” • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

Cartridge Diameter: Ø35

NOTES

CATALOGUE

105

PROPRIETARY PRODUCT DESIGN

IRIS PRACTICAL SOLUTIONS

CATALOGUE

106

CATALOGUE

107

IRIS

PROPRIETARY PRODUCT DESIGN

Product Code & Name MLB130 Wash-Basin Armature

82

Surface Chrome

100 130

Features

• Cache aerator (Bubble flow, with lime breaker, flow rate 8 lt /min) • Special cartridge with heat and flow rate adjustment • Lenght of outlet is 100 mm • Height of outlet is 82 mm • Measurements of hot and cold water flex hose connection are M8 x1-⅜” (or ½”)50 cm • Ideal operation pressure 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filtered interval tap is recommended

Cartridge Diameter: Ø35

Product Code & Name MBB130 70

Bathroom Armature G 1/2"

Surface Chrome

105 160

Features

140-160

G 1/2"

• Special aerator (Bubble flow, with lime breaker, Flow rate: 16 lt/min) • Special cartridge with heat and flow rate adjustment • Lenght of outlet is 160 mm • Armature connection threads are ¾”, eccentric connection threads are ¾”-½” • Spiral hose connection thread ½” • Ideal operation pressure 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended

Cartridge Diameter: Ø35

Product Code & Name MTE130 Monoblock Sink Armature

Surface Chrome 234

Features

242

• Special aerator (Bubble flow, with lime breaker, flow rate 8 lt /min) • Special cartridge with heat and flow rate adjustment • With swivel spout • Lenght of outlet is 242 mm • Height of outlet is 234 mm • Measurements of hot and cold water flex hose connection are M10x1-⅜” (or ½”)40 cm • Ideal operation pressure 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filtered interval tap is recommended

Cartridge Diameter: Ø35 MTE130 İRİS TEK GÖVDE EVİYE BATARYASI

CATALOGUE

108

Energy Saving

Water Saving

NOTES

CATALOGUE

109

EKO PRACTICAL SOLUTIONS

CATALOGUE

110

CATALOGUE

111

EKO Product Code & Name

G1/2"

MTA80

STOCKS LIMITED

70

Fully Embedded Bathroom Armature

Surface Chrome Features

G 1/2" C

300

M

Y

CM

30

MY

CY

CMY

650

G 3/4"

K

G 1/2" 125

• Special water saving aerator (Bubble flow, with lime breaker), Flow rate:16lt/min.)

• Special cartridge with heat and flow rate adjustment • Suitable with all embedded shower head and hand showers • Length of outlet 125 mm • Diverting unit with locking system • Measurement of outlet connection ¾” • Under plaster assemble • Ideal operation pressure 3-4 Bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

Cartridge Diameter: Ø35

G1/2"

Product Code & Name MAB80

STOCKS LIMITED

70

Embedded Bathroom Armature

Surface Chrome Features

G 1/2" C

300

M

Y

CM

30

MY

CY

CMY

650

G 3/4"

K

120

• Special aerator with water saving (Bubble flow, with lime breaker, Flow rate: 16 lt/min) • Special cartridge with heat and flow rate adjustment • Compatible with all embedded shower heads and with all handsets by using GGR05.

• Length of outlet is 120 mm • Outlet end connecting size is ½” • Installation under plaster • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

Cartridge Diameter: Ø35

G1/ 2"

Product Code & Name MKB80

STOCKS LIMITED

70

Embedded Cabin Armature

Surface Chrome G 1/ 2" M

Y

CM

300

C

30

MY

CY

CMY

650

G 1/ 2"

K

Features

• Special cartridge with heat and flow rate adjustment • Compatible with all embedded shower heads and with all handsets • Shower outlet length is 17,5 mm • Shower outlet wall connection is dimension is ½” • Shower outlet spiral hose connection dimension is ½” • Installation under plaster - Ideal working pressure is 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

Cartridge Diameter: Ø35

CATALOGUE

112

Energy Saving

Water Saving

Product Code & Name 22

MAD80

STOCKS LIMITED

Embedded Shower Armature

G1/2"

Surface Chrome Features 950

• Connection diemension ½” (inlet-outlet) • Special cartridge with heat and flow rate adjustment • Compatible with all embedded shower heads and with all handsets by using GGR05 • Installation under plaster • Ideal working pressure 3-4 Bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

Cartridge Diameter: Ø35

Product Code & Name MBB80 Ø65

Bathroom Armature G 1/2''

20°

Surface Chrome

160

Features

G 1/2''

• Special aerator with water saving (Bubble flow, with lime breaker, Flow rate: 16 lt/min) • Special cartridge with heat and flow rate adjustment • Length of outlet is 160 mm • Armature connection threads are ¾” • Eccentric connection threads are ¾” - ½” • Spiral hose connection threads are ½” • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused

140-160

by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

Cartridge Diameter: Ø35 MBB80 EKO BANYO BATARYASI

Product Code & Name MDB80 Ø65

Shower Armature

140-160

G 1/2''

65

G1/2"

Surface Chrome Features

• Special cartridge with heat and flow rate adjustment • Shower outlet end length is 65 mm • Armature connection threads are ¾” • Eccentric connection threads are ¾” - ½” • Spiral hose connection threads are ½” • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

Cartridge Diameter: Ø35 MDB 80 EKO DUŞ BATARYASI

CATALOGUE

113

EKO Product Code & Name G 1/ 2"

MDU80

56

Ø70

Shower Armature (Spout From Up)

Surface Chrome Features 140- 160

G 1/ 2"

• Overhead spiral flex hose output • On the side of the control lever • Special cartridge with heat and flow rate adjustment • Shower outlet length 56 mm • Armature connection threads ¾” • Eccentric connection threads ¾”-½” • Spiral hose connection threads ½” • Ideal operation pressure 3-4 Bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

Cartridge Diameter: Ø35

Product Code & Name MLB80 Wash-Basin Armature

75

Surface Chrome Features

• Special aerator with water saving (Bubble flow, with lime breaker, Flow rate: 8 lt/min) • Special cartridge with heat and flow rate adjustment • Length of outlet is 110 mm • Height of outlet 75 mm • Measurements of Hot & Cold water flex hose connection are M10x1- ⅜’’ (or ½’’) 40 cm • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused

SINK

110

by the contaminants inside the fittings, a filtered interval tap at the entrance of the flat is recommended.

Cartridge Diameter: Ø35

Product Code & Name MDL80 Swivel Wash-Basin Armature

90

Surface Chrome

160

Features

• Special aerator with water saving (Bubble flow, with lime breaker, Flow rate: 8 lt/min) • Special cartridge with heat and flow rate adjustment • With swivel spout • Length of outlet is 160 mm • Height of outlet 90 mm • Measurements of Hot & Cold water flex hose connection are M10x1- ⅜’’ (or ½’’) 40 cm • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filtered interval tap at the entrance of the flat is recommended.

MDL80 EKO DÖNER LAVABO BAT.

Cartridge Diameter: Ø35

CATALOGUE

114

Energy Saving

Water Saving

Product Code & Name MTL80 Monoblock Wash-Basin Armature

190

Surface Chrome

115

Features

• Special aerator with water saving (Bubble flow, with lime breaker, Flow rate: 8 lt/min) • Special cartridge with heat and flow rate adjustment • With swivel spout • Length of outlet is 115 mm • Height of outlet 190 mm • Measurements of Hot & Cold water flex hose connection a re M10x1- ⅜’’ (or ½’’) 40 cm • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filtered interval tap at the entrance of the flat is recommended.

Cartridge Diameter: Ø35

Product Code & Name MAL80 ø65

Applique Wash-Basin Armature

Surface Chrome 225

C

M

MY

G1/ 2"

Y

CM

CY

CMY

140- 160

K

Features

• Special aerator with water saving.

(Bubble flow, with lime breaker, Flow rate: 8 lt/min) • Special cartridge with heat and flow rate adjustment • With swivel spout • Length of outlet is 225 mm • Armature connection threads are ¾” • Eccentric connection threads are ¾” - ½” • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

Cartridge Diameter: Ø35

Product Code & Name MTE80 Monoblock Sink Armature

Surface Chrome Features

• Special aerator with water saving (Bubble flow, with lime breaker, Flow rate: 8 lt/min) • Special cartridge with heat and flow rate adjustment - With swivel spout • Length of outlet is 170 mm • Height of outlet 215 mm • Measurements of Hot & Cold water flex hose connection are M10x1- ⅜’’ (or ½’’) 40 cm • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filtered interval tap at the entrance of the flat is recommended.

Cartridge Diameter: Ø35

CATALOGUE

115

EKO Product Code & Name MEB80 Swivel Sink Armature

Surface Chrome

150

Features

200

• Special aerator with water saving (Bubble flow, with lime breaker, Flow rate: 8 lt/min) • Special cartridge with heat and flow rate adjustment • With swivel spout • Length of outlet is 200 mm • Height of outlet 150 mm • Measurements of Hot & Cold water flex hose connection are M10x1- ⅜’’ (or ½’’) 40 cm • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filtered interval tap at the entrance of the flat is recommended.

MEB80 EKO DÖNER EVİYE BATARYASI

Cartridge Diameter: Ø35

Product Code & Name MAE80 Applique Sink Armature

Surface Chrome Features

275

• Special aerator with water saving (Bubble flow, with lime breaker, Flow rate: 8 lt/min) • Special cartridge with heat and flow rate adjustment • With swivel spout • Length of outlet is 275 mm • Armature connection threads are ¾” • Eccentric connection threads are ¾” – ½ • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

Cartridge Diameter: Ø35 MAE80 - EKO MİX APLİKE EVİYE BATARYASI

Product Code & Name MAU80 102

Applique Sink Armature (Spout From Up) Ø70

Surface Chrome

207 263

140-160

Features

• Overhead spiral pipe output -on the side of the control lever • Special cartridge with heat and flow rate adjustment • Length of outlet 263 mm • Armature connection threads ¾” • Eccentric connection threads ¾”-½” • Ideal working pressure 3-4 Bar • To prevent any damage which can be caused

G 1/2"

by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

CATALOGUE

116

Cartridge Diameter: Ø35

Energy Saving

Water Saving

Product Code & Name MTB80 Ø70

Bidet Set with STS01

Ø70

45 50 45 50

G 1/2" G 1/2"

100

100 cm Spiral Hose (G1/2''-G1/2'')

Features

• Special cartridge with heat and flow rate adjustment • Shower outlet length 50 mm • Armature connection threads are ¾” • Eccentric connection threads are ¾”- ½” • Spiral Hose connection threads are ½” • Ideal operation pressure 3-4 Bar • To prevent any damage which can be caused • •

G 1/2"

G 1/2"

Surface Chrome

by the contaminants inside the fittings, a filter at the entrance of the flat is recommended. with spray bidet set (STS01) Length of spiral hose: 100 cm

100

100 cm Spiral Hose (G1/2''-G1/2'')

100 mm axis distance

Cartridge Diameter: Ø35

Product Code & Name MTB80-2

100 mm axis distance

Bidet Set with STS02 Ø70 Ø70

Surface Chrome

G 1/2" G 1/2"

100 cm Spiral Hose (G1/2"-G1/2") 100 cm Spiral Hose (G1/2"-G1/2")

100 100

45 50 45 50

G 1/2" G 1/2"

Features

• Special cartridge with heat and flow rate adjustment • Shower outlet length 50 mm • Armature connection threads are ¾” • Eccentric connection threads are ¾”- ½” • Spiral Hose connection threads are ½” • Ideal operation pressure 3-4 Bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended. with spray bidet set (STS02) Length of spiral hose: 100 cm

• •

Cartridge Diameter: Ø35

NOTES

CATALOGUE

117

ADRIO PRACTICAL SOLUTIONS

CATALOGUE

118

CATALOGUE

119

ADRIO Product Code & Name

G1/2"

MTA120

STOCKS LIMITED

70

Fully Embedded Bathroom Armature

Surface Chrome Features

300

G 1/2"

650

G 3/4"

30

G 1/2" 125

• Special aerator (Bubble flow, with lime breaker, flow rate 16 lt /min) • Special cartridge with heat and flow rate adjustment • Can be used both with embedded shower heads and hand showers • Lenght of outlet is 125 mm • Diverting unit with locking system • Measurement of outlet connection ¾” • Installation under plaster • Ideal working pressure 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended

Cartridge Diameter: Ø35

Product Code & Name G1/2"

MAB120

STOCKS LIMITED

Embedded Bathroom Armature 70

Surface Chrome Features

300

G 1/2"

650

G 3/4"

30

120

• Special aerator (Bubble flow, with lime breaker, flow rate 16 lt /min) • Special cartridge with heat and flow rate adjustment • Can be used both with embedded shower heads and with all handsets by using GGR05 • Lenght of outlet is 120 mm • Measurement of outlet connection ¾” • Installation under plaster • Ideal working pressure 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended

Cartridge Diameter: Ø35

Product Code & Name G1/2"

MKB120

STOCKS LIMITED

Embedded Cabin Armature 70

Surface Chrome Features 30

G 1/2"

650

300

G 1/2"

• Special cartridge with heat and flow rate adjustment • Can be used both with embedded shower heads and hand showers • Lenght of outlet is 17,5 mm • Measurement of outlet connection ½” • Measurement of shower outlet spiral hose connection ½” • Installation under plaster • Ideal working pressure 3-4 bar • To prevent any damage which can be caused by the contaminants

inside the fittings, a filter at the entrance of the flat is recommended

Cartridge Diameter: Ø35

CATALOGUE

120

Water Saving

Product Code & Name MAD120

22

STOCKS LIMITED

Embedded Shower Armature

G1/2"

Surface Chrome Features 950

• Special cartridge with heat and flow rate adjustment • Can be used both with embedded shower heads or with all handsets by using GGR05 • Connection dimension ½” (inlet outlet) • Installation under plaster • Ideal working pressure 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended

Cartridge Diameter: Ø35

MBB120.pdf

1

12/05/14

14:48

Product Code & Name MBB120 Ø70

Bathroom Armature G 1/ 2"

C

M

Y

CM

G 1/ 2"

160

10°

Surface Chrome Features

• Special aerator with water saving (Bubble flow, with lime breaker, Flow rate: 16 lt/min) • Ceramic Cartridge • Length of outlet is 160 mm • Armature connection threads are ¾” • Eccentric connection threads are ¾” - ½” • Spiral hose connection threads are ½” • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused

MY

CY

CMY

K

140- 160

Energy Saving

by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

Cartridge Diameter: Ø35

Product Code & Name MDB120 Ø70

Shower Armature G 1/2"

Surface Chrome

65

140-160

Features

• Ceramic Cartridge • Shower outlet end length is 65 mm • Armature connection threads are ¾” • Eccentric connection threads are ¾” - ½” • Spiral hose connection threads are ½” • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused

G 1/2"

by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

Cartridge Diameter: Ø35

CATALOGUE

121

ADRIO Product Code & Name MLB120 Wash-Basin Armature

75

Surface Chrome

110

Features

• Special aerator with water saving (Bubble flow, with lime breaker, Flow rate: 8 lt/min) • Ceramic Cartridge • Length of outlet is 110 mm • Height of outlet 75 mm • Measurements of Hot & Cold water flex hose connection are M10x1- ⅜’’ (or ½’’) 40 cm • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filtered interval tap at the entrance of the flat is recommended.

Cartridge Diameter: Ø35

Product Code & Name MLT120 Single Entrance Wash-Basin Armature

Surface Chrome 75

Features

110

• Special cartridge for single entry • Special water saving aerator (Bubble flow, with lime breaker, Flow rate:8lt/min.)

• Length of outlet 110 mm • Height of outlet 75 mm • Measurement of cold water flex hose connection M10x1-⅜”(or ½”) 40cm • Ideal working pressure 3-4 Bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filtered sub tap at the entrance of the flat is recommended

Cartridge Diameter: Ø35

Product Code & Name MDL120 90

Swivel Wash-Basin Armature

160

Surface Chrome Features

• Special aerator with water saving (Bubble flow, with lime breaker, Flow rate: 8 lt/min) • Ceramic Cartridge • With swivel spout • Length of outlet is 160 mm • Height of outlet 90 mm • Measurements of Hot & Cold water flex hose connection are M10x1- ⅜’’ (or ½’’) 40 cm • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filtered interval tap at the entrance of the flat is recommended.

Cartridge Diameter: Ø35

CATALOGUE

122

Energy Saving

Water Saving

Product Code & Name MTL120 190

Monoblock Wash-Basin Armature

Surface Chrome Features

• Special aerator with water saving (Bubble flow, with lime breaker, Flow rate: 8 lt/min) • Ceramic Cartridge • With swivel spout • Length of outlet is 115 mm • Height of outlet 190 mm • Measurements of Hot & Cold water flex hose connection are M10x1- ⅜’’ (or ½’’) 40 cm • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused

115

by the contaminants inside the fittings, a filtered interval tap at the entrance of the flat is recommended.

Cartridge Diameter: Ø35

Product Code & Name MTT120

190

Single Entrance Monoblock Wash-Basin Armature

Surface Chrome Features

• Special cartridge for single entry • Special water saving aerator (Bubble flow, with lime breaker), Flow rate:8lt/min.)

• Length of outlet 115 mm • Height of outlet 190 mm • Measurement of cold water flex hose connection M10x1-⅜”(or ½”) 40cm • Ideal working pressure 3-4 Bar • To prevent any damage which can be caused

by the contaminants inside the fittings, a filtered sub tap at the entrance of the flat is recommended

115

Cartridge Diameter: Ø35

Product Code & Name MAL120 Applique Wash-Basin Armature Ø70

Surface Chrome 225

Features

G 1/2"

140-160

• Special aerator with water saving (Bubble flow, with lime breaker, Flow rate: 8 lt/min) • Ceramic Cartridge • With swivel spout • Length of outlet is 225 mm • Armature connection threads are ¾” • Eccentric connection threads are ¾” - ½” • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

Cartridge Diameter: Ø35

CATALOGUE

123

ADRIO Product Code & Name MTE120 Monoblock Sink Armature

215

Surface Chrome Features

• Special aerator with water saving (Bubble flow, with lime breaker, Flow rate: 8 lt/min) • Ceramic Cartridge with heat and flow rate adjustment • With swivel spout • Length of outlet is 170 mm • Height of outlet 215 mm • Measurements of Hot & Cold water flex hose connection are M10x1- ⅜’’ (or ½’’) 40 cm • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused

170

by the contaminants inside the fittings, a filtered interval tap at the entrance of the flat is recommended.

Cartridge Diameter: Ø35

Product Code & Name MEB120 Swivel Sink Armature

150

Surface Chrome

200

Features

• Special aerator with water saving (Bubble flow, with lime breaker, Flow rate: 8 lt/min) • Ceramic Cartridge • With swivel spout • Length of outlet is 200 mm • Height of outlet 150 mm • Measurements of Hot & Cold water flex hose connection are M10x1- ⅜’’ (or ½’’) 40 cm • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filtered interval tap at the entrance of the flat is recommended.

Cartridge Diameter: Ø35

Product Code & Name MAE120 Ø70

Applique Sink Armature

Surface Chrome

G 1/2"

140-160

275

Features

• Special aerator with water saving (Bubble flow, with lime breaker, Flow rate: 8 lt/min) • Ceramic Cartridge • With swivel spout • Length of outlet is 275 mm • Armature connection threads are ¾” • Eccentric connection threads are ¾” – ½ • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

Cartridge Diameter: Ø35

CATALOGUE

124

Energy Saving

Water Saving

Product Code & Name MTB120

100 mm axis distance

Bidet Set with STS01

Ø70

Surface Chrome

45 50

G 1/2"

100 cm Spiral Hose (G1/2''-G1/2'')

Features

• Ceramic Cartridge • Shower outlet length 50 mm • Armature connection threads are ¾” • Eccentric connection threads are ¾”- ½” • Spiral Hose connection threads are ½” • Ideal operation pressure 3-4 Bar • To prevent any damage which can be caused

100

by the contaminants inside the fittings, a filter at the entrance of the flat is recommended. with spray bidet set (STS01) Length of spiral hose: 100 cm

G 1/2"

• •

Cartridge Diameter: Ø35

Product Code & Name MTB120-2

100 mm axis distance

Ø70

Bidet Set with STS02

G 1/2"

100 cm Spiral Hose (G1/2"-G1/2")

G 1/2"

100

45 50

Surface Chrome Features

• Ceramic Cartridge • Shower outlet length 50 mm • Armature connection threads are ¾” • Eccentric connection threads are ¾”- ½” • Spiral Hose connection threads are ½” • Ideal operation pressure 3-4 Bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended. with spray bidet set (STS02) Length of spiral hose: 100 cm

• •

Cartridge Diameter: Ø35

NOTES

CATALOGUE

125

NINO PRACTICAL SOLUTIONS

CATALOGUE

126

CATALOGUE

127

NINO Product Code & Name Ø65

BNB05 Bathroom Armature

Surface Chrome

G1/2''

175

Features

140-160

G 1/2''

• Special aerator with water saving (Bubble flow, with lime breaker, Flow rate: 16 lt/min) • 90° ceramic stemmer with turning on/off angle • Diverting unit which has locking system • Length of outlet is 175 mm • Armature connection threads are ¾” • Eccentric connection threads are ¾” - ½” • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter att the entrance of the flat is recommended.

BNB05 NİNO BANYO BATARYASI

Product Code & Name Ø65

DSB05 Shower Armature 55

Surface Chrome

G1/2"

G 1/2''

Features

140-160

• 90° ceramic stemmer with turning on/off angle • Shower outlet length is 55 mm • Armature connection threads are ¾” • Eccentric connection threads are ¾” - ½” • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

DSB 05 NİNO DUŞ BATARYASI

DAB NİNO DUVARDAN ANK.LABATARYASI

Product Code & Name DAB05

G1/2"

60

Applique Embedded Wash-Basin Armature

Surface Chrome 25,5

86,5

86,5

39,5

CATALOGUE

128

30°

230

Features

• Special water saving aerator (Bubble flow, with lime breaker), Flow rate :8lt/dk) • 90° ceramic stemmer with turning on/off angle • Under plaster assemble • Length of outlet 230 mm • Space between hot & cold water flywheel 173 mm • Ideal operation pressure 3-4 Bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

Energy Saving

Water Saving

Product Code & Name DLB05 Swivel Spout Wash-Basin Armature

Surface Chrome

165

Features

140

• Special aerator with water saving (Bubble flow, with lime breaker, Flow rate: 8 lt/min) • 90° ceramic stemmer with turning on/off angle • With swivel spout • Length of outlet is 140 mm • Height of outlet 165 mm • Measurements of Hot & Cold water flex hose connection are M10x1- ⅜’’ (or ½’’) 40 cm • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filtered interval tap at the entrance of the flat is recommended.

DLB05 NİNO DÖNER BORULU LAVABO BATARYASI

Product Code & Name ADL05 Ø65

Swivel Spout Wash-Basin Armature

Surface Chrome

G 1/2''

185

Features

140-160

• Special aerator with water saving (Bubble flow, with lime breaker, Flow rate: 8 lt/min) • 90° ceramic stemmer with turning on/off angle • Length of outlet is 185 mm • Armature connection threads are ¾” • Eccentric connection threads are ¾” - ½” • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

Product Code & Name BDB05 Bidet Armature

Surface Chrome

95

Features

125

• Specially pin jointed, special aerator with water saving (Bubble flow, with lime breaker, Flow rate: 8 lt/min) • 90° ceramic stemmer with turning on/off angle • With swivel spout • Length of outlet is 125 mm • Height of outlet 95 mm • Measurements of Hot & Cold water flex hose connection are M10x1- ⅜’’ (or ½’’) 40 cm • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filtered interval tap at the entrance of the flat is recommended.

BDB05 NİNO BİDE BATARYASI

CATALOGUE

129

NINO Product Code & Name UEB05 Swivel Sink Armature with U Spout

Surface Chrome Features 260

195

• Special aerator with water saving (Bubble flow, with lime breaker, Flow rate: 8 lt/min) • 90° ceramic stemmer with turning on/off angle • With swivel spout • Length of outlet is 195 mm • Height of outlet 260 mm • Measurements of Hot & Cold water flex hose connection are M10x1- ⅜’’ (or ½’’) 40 cm • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filtered interval tap at the entrance of the flat is recommended.

Product Code & Name LEB05 Swivel Sink Armature L Spout

Surface Chrome

255

190

Features

• Special aerator with water saving (Bubble flow, with lime breaker, Flow rate: 8 lt/min) • 90° ceramic stemmer with turning on/off angle • With swivel spout • Length of outlet is 190 mm • Height of outlet 255 mm • Measurements of Hot & Cold water flex hose connection are M10x1- ⅜’’ (or ½’’) 40 cm • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filtered interval tap at the entrance of the flat is recommended.

Product Code & Name ADE05 Swivel Spout Sink Armature Ø65

Surface Chrome 260

Features

140-160

G 1/2''

• Special aerator with water saving (Bubble flow, with lime breaker, Flow rate: 8 lt/min) • 90° ceramic stemmer with turning on/off angle • With swivel spout • Length of outlet is 260 mm • Armature connection threads are ¾” • Eccentric connection threads are ¾” - ½” • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

ADE05 NİNO APLİKE DÖNER EVİYE BATARYASI

CATALOGUE

130

Energy Saving

Water Saving

Product Code & Name Interval Tap

Features

TMS05-2

G1/2"

TMS 05 NİNO TAHATAR MUSLUK

TMS05

• 90° ceramic stemmer with turning on/off angle • Rosette diameter is Ø55 mm • Suitable size for ½” connection • Tap – wall connection size is ½”

Interval Tap

Surface Chrome

A.A

Product Code & Name

24

AAK05 Embedded Interval Stop Valve Ø70

50

G 1/2"

Surface Chrome

Features

• 90° ceramic stemmer with turning on/off angle • Rosette diameter is Ø55 mm • Suitable size for ⅜” connection • Tap – wall connection size is ½”

Features

• 90° ceramic stemmer with turning on/off angle • Rosette diameter is Ø70 mm • Tap – wall connection size is ½” • It can be used as interval tap on suspended closets with concealed interval pipes

G 1/2"

105

COPPER OXIDE PRODUCTS The technical features are the same as the same named chrome products.

Product Code & Name BNB05-B Nino Bathroom Armature

Surface Copper Oxide Coating

Product Code & Name DLB05-B Nino Swivel Spout Wash-Basin Armature

Surface Copper Oxide Coating

Product Code & Name UEB05-B Product Code & Name AAK05-B

Nino Swivel Sink Armature with U Spout

Surface Copper Oxide Coating

Nino Embedded Stop Valve

Surface Copper Oxide Coating

CATALOGUE

131

KOC PRACTICAL SOLUTIONS

CATALOGUE

132

CATALOGUE

133

KOC Product Code & Name BNB13 Bathroom Armature

Surface Chrome Features

• Special aerator with water saving (Bubble flow, with lime breaker, Flow rate: 16 lt/min) • 90° ceramic stemmer with turning on/off angle • Length of outlet is 130 mm • Armature connection threads are ¾” • Eccentric connection threads are ¾” - ½” • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

Product Code & Name Ø65

MNB13 Monoblok Bathroom Armature G1/2" 80 150

Surface Chrome Features

140-160

• Special aerator with water saving (Bubble flow, with lime breaker, Flow rate: 16 lt/min) • 90° ceramic stemmer with turning on/off angle • Diverting unit with minimal design • Length of outlet is 150 mm • Armature connection threads are ¾” • Eccentric connection threads are ¾” – ½” • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused

by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

MNB13 KOÇ MONOBLOK BANYO BATARYASI

Product Code & Name ABB13 Semi Embedded Bathroom Armature

Surface Chrome Features

• Special aerator with water saving (Bubble flow, with lime breaker, Flow rate: 16 lt/min) • 90° ceramic stemmer with turning on/off angle • Semi embedded connection pipe group unit • Length of outlet is 130 mm • Armature connection threads are ¾” • Eccentric connection threads are ¾” - ½” • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

CATALOGUE

134

Energy Saving

Water Saving

Ø65

Product Code & Name DSB13 Shower Armature

G 1/2''

G3/4"

Surface Chrome

55

Features

140-160

• 90° ceramic stemmer with turning on/off angle • Shower outlet length is 55 mm • Armature connection threads are ¾” • Eccentric connection threads are ¾” - ½” • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

Product Code & Name TKB13 Monoblock Eagle Wash-Basin Armature

Surface Chrome Features

• Special aerator (Bubble flow, with lime breaker) • 90° ceramic stemmer with turning on/off angle • Measurements of Hot & Cold water flex hose connection are M10x1- ⅜’’ (or ½’’) 40 cm • Length of outlet is 140 mm • Height of outlet 110 mm • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused

by the contaminants inside the fittings, a filtered interval tap at the entrance of the flat is recommended.

Product Code & Name KLB13 Monoblock Swan Wash-Basin Armature

150

Surface Chrome

135

Features

• Special aerator with water saving (Bubble flow, with lime breaker) • 90° ceramic stemmer with turning on/off angle • With swivel spout • Length of outlet is 135 mm • Height of outlet 150 mm • Measurements of Hot & Cold water flex hose connection are M10x1- ⅜’’ (or ½’’) 40 cm • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filtered interval tap at the entrance of the flat is recommended.

KLB13 TEK GÖVDE KUĞU LAVABO BATARYASI

CATALOGUE

135

KOC Product Code & Name DLB13 Ø65

Swivel Spout Wash-Basin Armature

Surface Chrome

G 1/2''

195

Features

140-160

• Special aerator with water saving (Bubble flow, with lime breaker) • 90° ceramic stemmer with turning on/off angle • With swivel spout • Length of outlet is 195 mm • Armature connection threads are ¾” • Eccentric connection threads are ¾” - ½” • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

Product Code & Name KEB13 Monoblock Swan Sink Armature

220

Surface Chrome

185

Features

• Special aerator (Bubble flow, with lime breaker) • 90° ceramic stemmer with turning on/off angle • With swivel spout • Length of outlet is 185 mm • Height of outlet 220 mm • Measurements of Hot & Cold water flex hose connection are M10x1- ⅜’’ (or ½’’) 40 cm • Ideal working pressure 3-4 bar • To prevent any damage which can be caused

by the contaminants inside the fittings, a filtered interval tap at the entrance of the flat is recommended.a

Product Code & Name Ø65

SEB13 Permanent Sink/Wash-Basin Armature

Surface Chrome G 1/2''

165

140-160

• Special aerator (Bubble flow, with lime breaker) • 90° ceramic stemmer with turning on/off angle • with permanent spout- Length of outlet is 165 mm • Armature connection threads are ¾” • Eccentric connection threads are ¾” - ½” • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

SEB13 KOÇ SABİT EVİYE BATARYASI

CATALOGUE

136

Features

Energy Saving

Water Saving

Product Code & Name DEB13 Ø65

Swivel Spout Sink Armature

Surface Chrome

G 1/2''

270

Features 140-160

• Special aerator (Bubble flow, with lime breaker) • 90° ceramic stemmer with turning on/off angle • Swivel spout • Length of outlet is 270 mm • Armature connection threads are ¾” • Eccentric connection threads are ¾” - ½” • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused b y the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

DEB13 DÖNER BORULU EVİYE BATARYASI

Product Code & Name LMS13 Wash-Basin Tap

35

Surface Chrome Features 80

• 90° ceramic stemmer with turning on/off angle • Length of outlet is 80 mm • Height of outlet 35 mm • Measurements of Hot & Cold water flex hose connection are M10x1- ⅜’’ (or ½’’) 40 cm • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filtered interval tap at the entrance of the flat is recommended.

Product Code & Name UMS13 Long Tap

Features

G1/2"

Ø60

Surface Chrome

123

• 90° ceramic stemmer with turning on/off angle • Length of outlet is 123 mm • Rosette diameter is Ø60 mm • Tap – wall connection size is ½” • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

CATALOGUE

137

KOC Product Code & Name KMS13 Short Tap

Features

• 90° ceramic stemmer with turning on/off angle • Length of outlet is 87 mm • Rosette diameter is Ø60 mm • Tap – wall connection size is ½” • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused

G1/2"

Ø60

Surface Chrome

87

by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

Product Code & Name CMS13 Surface Chrome

G1/2"

Ø60

Laundry Tap

Features

• 90° ceramic stemmer with turning on/off angle • Length of outlet is 57 mm • Rosette diameter is Ø60 mm • Tap – wall connection size is ½” • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused

57

by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

CMS13-2

G 1/2"

Ø60

Product Code & Name Laundry Tap (without Union) G 3/4"

Surface Chrome

57

G 1/2"

Ø60

Features

Interval Tap

• 90° ceramic stemmer with turning on/off angle • Rosette diameter is Ø60 mm • Suitable size for ⅜” connection • Tap – wall connection size is ½”

TMS13-2

Features

TMS13

Interval Tap

Surface Chrome

138

• 90° ceramic stemmer with turning on/off angle • Length of outlet is 57 mm • Rosette diameter is Ø60 mm • Tap – wall connection size is ½” • Ideal working pressure is 3-4 bar • To prevent any damage which can be

caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

Product Code & Name

CATALOGUE

Features

• 90° ceramic stemmer with turning on/off angle • Rosette diameter is Ø60 mm • Suitable size for ½” connection • Tap – wall connection size is ½”

Energy Saving

Water Saving

NOTES

CATALOGUE

139

TOPUZ PRACTICAL SOLUTIONS

CATALOGUE

140

CATALOGUE

141

TOPUZ Product Code & Name BNB01 Bathroom Armature

Surface Chrome Features

• Special aerator with water saving (Bubble flow, with lime breaker, Flow rate: 16 lt/min) • 90° ceramic stemmer with turning on/off angle • Length of outlet is 130 mm • Armature connection threads are ¾” • Eccentric connection threads are ¾” - ½” • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

Product Code & Name MNB01 Ø65

Monoblok Bathroom Armature

Surface Chrome

G1/2" 80 150

Features

140-160

• Special aerator with water saving (Bubble flow, with lime breaker, Flow rate: 16 lt/min) • 90° ceramic stemmer with turning on/off angle • Diverting unit with minimal design • Length of outlet is 150 mm • Armature connection threads are ¾” • Eccentric connection threads are ¾” - ½” • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused

by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

MNB01 TOPUZ MONOBLOK BANYO BATARYASI

Product Code & Name ABB01 Semi Embedded Bathroom Armature

Surface Chrome Features

• Special aerator with water saving (Bubble flow, with lime breaker, Flow rate: 16 lt/min) • Ceramic packing with 90° opening/closing angle • Semi embedded connection spout group unit • Length of outlet is 130 mm • Armature connection threads are ¾” • Eccentric connection threads are ¾” - ½” • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

CATALOGUE

142

Energy Saving

Water Saving

Product Code & Name Ø65

DSB01 Shower Armature

G 1/2''

G3/4"

Surface Chrome

55

Features

140-160

• 90° ceramic stemmer with turning on/off angle • Shower outlet length is 55 mm • Armature connection threads are ¾” • Eccentric connection threads are ¾” - ½” • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

DSB 01 TOPUZ DUŞ BATARYASI

Product Code & Name TKB01 Monoblock Eagle Wash-Basin Armature

Surface Chrome Features

• Special aerator (Bubble flow, with lime breaker) • 90° ceramic stemmer with turning on/off angle • Measurements of Hot & Cold water flex hose connection are M10x1- ⅜’’ (or ½’’) 40 cm • Length of outlet is 140 mm • Height of outlet 110 mm • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused

by the contaminants inside the fittings, a filtered interval tap at the entrance of the flat is recommended.

Product Code & Name KLB01 Monoblock Swan Wash-Basin Armature

150

Surface Chrome

135

Features

• Special aerator (Bubble flow, with lime breaker) • 90° ceramic stemmer with turning on/off angle • With swivel spout • Length of outlet is 135 mm • Height of outlet 150 mm • Measurements of Hot & Cold water flex hose connection are M10x1- ⅜’’ (or ½’’) 40 cm • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filtered interval tap at the entrance of the flat is recommended.

CATALOGUE

143

TOPUZ Product Code & Name DLB01 Swivel Spout Wash-Basin Armature 180

Ø65

Surface Chrome G 1/2''

Features

140-160

• Special aerator (Bubble flow, with lime breaker) • 90° ceramic stemmer with turning on/off angle • With swivel spout • Length of outlet is 180 mm • Armature connection threads are ¾” • Eccentric connection threads are ¾” - ½” • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

Product Code & Name MNL01 Ø70

Monoblok Wash-Basin Armature 15

°

Surface Chrome

190

G 1/2"

Features

140-160

• Special water saving aerator (Bubble flow, with lime breaker, Flow rate:8lt/min.)

• 90˚ ceramic stemmer with turning on/off angle • Length of outlet is 190 mm • Armature connection threads ¾” • Eccentric connection threads ¾”-½” • Ideal working pressure 3-4 Bar • To prevent any damage which can be caused

by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

Product Code & Name KEB01 Monoblock Swan Sink Armature

220

Surface Chrome

185

Features

• Special aerator (Bubble flow, with lime breaker) • 90° ceramic stemmer with turning on/off angle • With swivel spout • Length of outlet is 185 mm • Height of outlet 220 mm • Measurements of single inlet flex hose connection are M10x1- ⅜’’ (or ½’’) 40 cm • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filtered interval tap at the entrance of the flat is recommended.

CATALOGUE

144

Energy Saving

Product Code & Name Ø65

SEB01 Permanent Sink/Wash-Basin Armature

Surface Chrome

G 1/2''

165

Features

140-160

• Special aerator with water saving (Bubble flow, with lime breaker) • 90° ceramic stemmer with turning on/off angle • with permanent spout • Length of outlet is 165 mm • Armature connection threads are ¾” • Eccentric connection threads are ¾” - ½” • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

SEB 01 TOPUZ SABİT EVİYE BATARYASI

230

Product Code & Name DEB01

Ø65

Swivel Spout Sink Armature

G 1/2''

Surface Chrome Features

• Special aerator (Bubble flow, with lime breaker) • 90° ceramic stemmer with turning on/off angle • With swivel spout • Length of outlet is 230 mm • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused

140-160

by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

DEB01 TOPUZ DÖNER BORULU EVİYE BATARYASI

Product Code & Name DLM01 Swivel Spout Wash-Basin Tap 135 160

Water Saving

Surface Chrome Features

• Special aerator (Bubble flow, with lime breaker) • 90° ceramic stemmer with turning on/off angle • With swivel spout • Length of outlet is 135 mm • Height of outlet 160 mm • Measurements of single inlet flex hose connection are M10x1- ⅜’’ (or ½’’) 40 cm • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filtered interval tap at the entrance of the flat is recommended.

DLM01 TOPUZ DÖNER LAVABO MUSLUK

CATALOGUE

145

TOPUZ Product Code & Name ALM01 Applique Wash-Basin Tap

Surface Chrome Features G1/2"

• Special aerator (Bubble flow, with lime breaker) • 90° ceramic stemmer with turning on/off angle • With swivel spout • Length of outlet is 185 mm • Rosette diameter is Ø60 mm • Tap – wall connection dimension is ½” • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused

185

by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

ALM01 TOPUZ APLİKE LAVABO MUSLUK

Product Code & Name DEM01 Swivel Spout Sink Tap

220

175

Surface Chrome Features

• Special aerator (Bubble flow, with lime breaker) • 90° ceramic stemmer with turning on/off angle • With swivel spout • Length of outlet is 175 mm • Height of outlet 220 mm • Measurements of single inlet flex hose connection are M10x1- ⅜’’ (or ½’’) 40 cm • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused

by the contaminants inside the fittings, a filtered interval tap at the entrance of the flat is recommended.

DEM01 TOPUZ DÖNER EVİYE MUSLUK

Product Code & Name AEM01 Applique Sink Tap

G1/2"

Surface Chrome Features 230

AEM01 TOPUZ APLİKE EVİYE MUSLUK

• Special aerator (Bubble flow, with lime breaker) • 90° ceramic stemmer with turning on/off angle • With swivel spout • Length of outlet is 230 mm • Rosette diameter is Ø60 mm • Tap – wall connection is dimension ½” • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

CATALOGUE

146

Energy Saving

Water Saving

Product Code & Name LMS01

35

Wash-Basin Tap

Surface Chrome Features

80

• 90° ceramic stemmer with turning on/off angle • Length of outlet is 80 mm • Height of outlet 35 mm • Measurements of single inlet flex hose connection are M10x1- ⅜’’ (or ½’’) 40 cm • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filtered interval tap at the entrance of the flat is recommended.

LMS 01 TOPUZ LAVABO MUSLUK

Product Code & Name UMS01 Long Tap

Ø60

G1/2"

Surface Chrome Features

123

• 90° ceramic stemmer with turning on/off angle • Length of outlet is 123 mm • Rosette diameter is Ø60 mm • Tap – wall connection dimension is ½” • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused

by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

Product Code & Name KMS01 Short Tap

G1/2"

Ø60

Surface Chrome Features 87

• 90° ceramic stemmer with turning on/off angle • Length of outlet is 87 mm • Ideal working pressure is 3-4 bar • TTo prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

CATALOGUE

147

TOPUZ Product Code & Name CMS01 Laundry Tap

Ø60 G 1/2"

Surface Chrome Features

• 90° ceramic stemmer with turning on/off angle • Length of outlet is 57 mm • Rosette diameter is Ø60 mm • Tap – wall connection dimension is ½” • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused

57

by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

Product Code & Name CMS01-2 G1/2"

Ø60

Laundry Tap (without Union)

Surface Chrome G 3/4" 57

Features

• 90° ceramic stemmer with turning on/off angle • Length of outlet is 50 mm • Rosette diameter is Ø60 mm • Tap – wall connection dimension is ½” • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused

by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

Product Code & Name TMS03

TMS03-2

Interval Tap

Interval Tap

G 1/2"

Ø60

Surface Chrome Features

• 90° ceramic stemmer with turning on/off angle • Rosette diameter is 60 mm • Suitable size for ⅜” connection • Tap – wall connection size is ½”

CATALOGUE

148

Features

• 90° ceramic stemmer with turning on/off angle • Rosette diameter is 60 mm • Suitable size for ⅜” connection • Tap – wall connection size is ½”

Energy Saving

Water Saving

NOTES

CATALOGUE

149

THERMOSTATIC ADVANCED WATER TECHNOLOGY

CATALOGUE

150

CATALOGUE

151

THERMOSTATIC Ø70

Product Code & Name TBB01 Thermostatic Bathroom Armature

G1/2" 167

Surface Chrome

• 90° ceramic stemmer with turning on/off angle • Diverting unit which has locking system • Two stages of turning on/off • Comfortable showering possibility with superior thermostat technology • Secure pass for temperatures above 38ºC • Special aerator with water saving (Bubble flow, with lime breaker, Flow rate: 16 lt/min) • Length of outlet is 167 mm • Armature connection threads are ¾” • Eccentric connection threads are ¾” - ½” • Spiral hose connection threads are ½” - Ideal working pressure is 3-4 bar • To prevent any damage which can be caused

140-160

38°

G 1/2''

Features

by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

TBB01 TERMOSTATİK BANYO BATARYASI

Product Code & Name Ø65

TBB02 Thermostatic Bathroom Armature G1/2" 110

Surface Chrome

165

30

35

• 180° ceramic stemmer with turning on/off angle • Diverting unit which has locking system • Comfortable showering possibility with superior thermostat technology • Secure pass for temperatures above 38ºC • Special aerator with water saving (Bubble flow, with lime breaker, Flow rate: 16 lt/min) • Length of outlet is 165 mm • Armature connection threads are ¾” • Eccentric connection threads are ¾” - ½” • Spiral hose connection threads are ½” • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused

140-160

38

G 1/2 ''

Features

by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

TBB02 TERMOSTATİK BANYO BATARYASI

Product Code & Name Ø70

TDB01 Thermostatic Shower Armature G 1/2 ''

38°

Surface Chrome

140-160

G 1/2''

77

Features

• 90° ceramic stemmer with turning on/off angle • Comfortable showering possibility with superior thermostat technology • Two stages of turning on/off • Secure pass for temperatures above 38ºC • Shower outlet length is 77 mm • Armature connection threads are ¾” • Eccentric connection threads are ¾” - ½” • Spiral hose connection threads are ½” • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

CATALOGUE

152

TDB01 TERMOSTATİK DUŞ BATARYASI

Energy Saving

Water Saving

Product Code & Name TDL01 Thermostatic Swivel Wash-Basin Armature

Surface Chrome

160

Features

132

TDL01 TERMOSTATİK DÖNER LAVABO BATARYASI

• Special aerator with water saving (Bubble flow, with lime breaker, Flow rate: 8 lt/min) • 90° ceramic stemmer with turning on/off angle • Two stagaes of turning on/off • Comfortable showering possibility with superior thermostat technology • Secure pass for temperatures above 38ºC, With swivel spout • Length of outlet is 132 mm, Height of outlet 160 mm • Measurements of Hot & Cold water flex hose connection are M10x1- ⅜’’ (or ½’’) 40 cm • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filtered interval tap at the entrance of the flat is recommended.

Product Code & Name Ø70

TAE01 Thermostatic Applique Sink Armature 210

Surface Chrome Features

• 90° ceramic stemmer with turning on/off angle • Comfortable flow possibility with superior thermostat technology • Secure pass for temperatures above 38°C • Length of outlet 287 mm • With swivel spout • Armature connection threads are ¾” • Eccentric connection threads are ¾” - ½” • Ideal operation pressure 3-4 Bar • To prevent any damage which can be caused

140-160

38°

G 1/2''

77

by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

TAE01 TERMOSTATİK APLİKE EVİYE BATARYASI

NOTES

CATALOGUE

153

PHOTOCELL AND TIME CONTROLLED ARMATURES ADVANCED WATER TECHNOLOGY

CATALOGUE

154

CATALOGUE

155

PHOTOCELL Product Code & Name FLB01 FLB01-2

Photocell Wash-Basin Armature - Double Water Inlet Photocell Wash-Basin Armature - Single Water Inlet

Surface Chrome Features

• Special aerator (Bubble flow, with lime breaker, flow rate 8 lt /min) • Lenght of outlet is 90 mm • Height of outlet is 90 mm • It is controlled with micro computer.It is adjusted to stop the water by itself after one minute in order to prevent wasting of water • Adjustable sensor distance is 12-18 cm • Ac and dc support, when ac is switched off dc automatically switches on (ac 230 v hz /dc 6v) (4aa alkaline batteries) • Possibility of both the hot water and cold water usage due to t tap for the double water product • Ideal operation pressure 3-4 bar • Water temperature is 0,1 - 60 ˚C • To prevent any damage which can be caused by the contaminants

3

3

inside the fittings, a filtered interval tap is recommended

Product Code & Name FLB02 FLB02-2

Photocell Wash-Basin Armature - Double Water Inlet Photocell Wash-Basin Armature - Single Water Inlet

Surface Chrome Features

• Special aerator (Bubble flow, with lime breaker, flow rate 8 lt /min) • Lenght of outlet is 120 mm • Height of outlet is 110 mm • It is controlled with micro computer.It is adjusted to stop the water by itself after one minute in order to prevent wasting of water • Adjustable sensor distance is 12-18 cm • Ac and dc support, when ac is switched off dc automatically switches on (AC 230 V hz /DC 6V) (4aa alkaline batteries) • Possibility of both the hot water and cold water usage due to t tap for the double water product • Ideal operation pressure 3-4 bar • Water temperature is 0,1 - 60 ˚C • To prevent any damage which can be caused by the contaminants

3

3

inside the fittings, a filtered interval tap is recommended

Product Code & Name FLB04

Photocell Wash-Basin Armature (Manuel Heat Control) 140

Surface Chrome

115

25°

Features

• Special aerator (Bubble flow, with lime breaker, flow rate 8 lt /min) • Lenght of outlet is 140 mm • Height of outlet is 115 mm • It is controlled with micro computer.It is adjusted to stop the water by itself after one minute in order to prevent wasting of water • Adjustable sensor distance is 12-18 cm • DC support (DC 4x1,5V =6V-AA alkaline batteries) • Battery life 2 years (4000 usage /month) • All the control box parts are places inside the block • Possibility of both the hot water and cold water usage due to manuel heat control on the block body • Ideal operation pressure 3-4 bar • Water temperature is 0,1 - 80 ˚C • To prevent any damage which can be caused by the contaminants inside the fittings, a filtered interval tap is recommended

CATALOGUE

156

Energy Saving

Water Saving

Product Code & Name FLB06 FLB06-2

Photocell Wash-Basin Armature - Double Water Inlet Photocell Wash-Basin Armature - Single Water Inlet

Surface Chrome Features

• Special aerator (Bubble flow, with lime breaker, flow rate 8 lt /min) • Lenght of outlet is 90 mm • Height of outlet is 85 mm • It is controlled with micro computer.It is adjusted to stop the water by itself after one minute in order to prevent wasting of water • Adjustable sensor distance is 12-18 cm • Ac and dc support, when ac is switched off dc automatically switches on (AC 230 V hz /DC 6v) (4AA alkaline batteries) • Possibility of both the hot water and cold water usage due to t tap for the double water product • Ideal operation pressure 3-4 bar • Water temperature is 0,1 - 60 ˚C • To prevent any damage which can be caused by the contaminants

3

3

inside the fittings, a filtered interval tap is recommended

Product Code & Name FLB07 Photocell Over Table Wash-Basin Armature - Double Water Inlet FLB07-2 Photocell Over Table Wash-Basin Armature - Single Water Inlet Surface Chrome Features

• Special aerator (Bubble flow, with lime breaker, flow rate 8 lt /min) • Lenght of outlet is 130 mm • Height of outlet is 290 mm • Long height to be used at over table wash basins • It is controlled with micro computer.It is adjusted

3

to stop the water by itself after one minute in order to prevent wasting of water Adjustable sensor distance is 12-18 cm AC and DC support, when ac is switched off dc automatically switches on (AC 230 V hz /DC 6V) (4AA alkaline batteries) Possibility of both the hot water and cold water usage due to t tap for the double water product Ideal operation pressure 3-4 bar Water temperature is 0,1 - 60 ˚C To prevent any damage which can be caused by the contaminants inside the fittings, a filtered interval tap is recommended

• • • • • •

3

Product Code & Name FLB08 FLB08-2

Photocell Wash-Basin Armature - Double Water Inlet Photocell Wash-Basin Armature - Single Water Inlet

Surface Chrome Features

3

3

• Special aerator (Bubble flow, with lime breaker, flow rate 8 lt /min) • Lenght of outlet is 115 mm • Height of outlet is 165 mm • With swivel spout • It is controlled with micro computer.It is adjuste to stop the water by itself after one minute in order to prevent wasting of water • Adjustable sensor distance is 12-18 cm • AC and DC support, when ac is switched off dc automatically switches on (AC 230 V hz /DC 6V) (4AA alkaline batteries) • Possibility of both the hot water and cold water usage due to t tap for the double water product • Ideal operation pressure 3-4 bar • Water temperature is 0,1 - 60 ˚C • To prevent any damage which can be caused by the contaminants inside the fittings, a filtered interval tap is recommended

CATALOGUE

157

PHOTOCELL Product Code & Name

105

FPB01 40

Photocell Urinal Armature (over plaster)

330

G 1/2"

Surface Chrome Features

• Automatic washing feature • DC support (DC 6V) (4 AA alkaline) • Water flow rate can be adjusted by turning the control valve on or off • Adjustable sensor distance is 30-70 cm • Water temperature is 0,1 - 60 ˚C • Ideal operation pressure 3-4 bar

Product Code & Name FPB02

90 84

Photocell Urinal Armature (under plaster)

G 1/2"

113

Surface Chrome Features

Ø14

180

• Automatic washing feature • Water tight, water resistant structure, protects against humidity • AC and DC support, when ac is switched off dc automatically switches on (AC 230 V hz /DC 6V) (4 AA alkaline batteries) • Water flow rate can be adjusted by turning the control valve on or off • Adjustable sensor distance is 30-70 cm • Water temperature is 0,1 - 60 ˚C • Ideal operation pressure 3-4 bar

Product Code & Name FDL01 Photocell Wash Basin Armature From The Wall, Single Water Inlet

Surface Chrome

36

55

G 1/2"

Features

195 247,5

• Square body design • Special aerator (Bubble flow, with lime breaker, flow rate 8 lt /min) • Lenght of outlet is 195 mm • It is controlled with micro computer.It is adjusted to stop the water by itself after one minute in order to prevent wasting of water • Adjustable sensor distance ( 5-30 cm) • Dc support (dc 4x1,5v = 6v -aa alkaline batteries) • Wall connection sizes ½” • Ideal working pressure 3-4 bar • To prevent any damage which can be caused

by the contaminants inside the fittings,

a filter at the entrance of the flat is recommended

CATALOGUE

158

FDL01 DUVARDAN FOTOSELLİ LAVABO BATARYASI(KARE)

Energy Saving

Water Saving

Product Code & Name FDL02 Photocell Wash Basin Armature From The Wall, Single Water Inlet

Surface Chrome Features

36

55

G 1/2"

10

195 247,50

• Rounded body design • Special aerator (Bubble flow, with lime breaker, flow rate 8 lt /min) • Lenght of outlet is 195 mm • It is controlled with micro computer.It is adjusted to stop the water by itself after one minute in order to prevent wasting of water • Adjustable sensor distance ( 5-30 cm) • Dc support (dc 4x1,5v = 6v -aa alkaline batteries) • Wall connection sizes ½” • Ideal working pressure 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended

Cartridge Diameter: Ø55

Product Code & Name ZAE01 Self Closing Time Controlled Built in Kitchen Armature (with Cap)

Surface Chrome Features

• Single water inlet • Bubble flow,lime breaker • Water flow adjusted between 7 to 14 seconds • Maximum flow rate 6lt/min • Lenght of outlet is 145 mm • Height of outlet is 150 mm • Ideal working pressure 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended

Product Code & Name ZAE02 Self Closing Time Controlled Built in Kitchen Armature (Capless)

Surface Chrome Features

• Single water inlet • Bubble flow,lime breaker • Water flow adjusted between 12 to 14 seconds • Maximum flow rate 6lt/min • Lenght of outlet is 145 mm • Height of outlet is 150 mm • Ideal working pressure 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended

CATALOGUE

159

DOCTOR& PHYSICALLY DISABLED ADVANCED WATER TECHNOLOGY

CATALOGUE

160

CATALOGUE

161

DOCTOR & PHYSICALLY DISABLED Product Code & Name MLB45 Wash-Basin Armature

Surface Chrome Features

• Special aerator with water saving (Bubble flow, with lime breaker, Flow rate: 8 lt/min) • Special cartridge with heat and flow rate adjustment • Long and ergonomic control handle for easier control of the turning on and off • Length of outlet is 140 mm • Height of outlet 70 mm • Measurements of Hot & Cold water flex hose connection are M10x1- ⅜’’ (or ½’’) 40 cm • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused

70

15°

140

by the contaminants inside the fittings, a filtered interval tap at the entrance of the flat is recommended.

Cartridge Diameter: Ø40

Product Code & Name MDL45 Swivel Wash-Basin Armature

95

Surface Chrome Features

160

• Special aerator with water saving (Bubble flow, with lime breaker, Flow rate: 8 lt/min) • Special cartridge with heat and flow rate adjustment • Long and ergonomic control handle for easier control of the turning on and off • With swivel spout • Length of outlet is 160 mm • Height of outlet 95 mm • Measurements of Hot & Cold water flex hose connection are M10x1- ⅜’’ (or ½’’) 40 cm • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused

by the contaminants inside the fittings, a filtered interval tap at the entrance of the flat is recommended.

Cartridge Diameter: Ø40

Product Code & Name MAL45 Applique Wash-Basin Armature

Surface Chrome Ø65

Features

140-160

G 1/2"

230

• Special aerator (Bubble flow, with lime breaker, flow rate 8 lt /min) • Special cartridge with heat and flow rate adjustment • With swivel spout • Lenght of outlet is 230 mm • Long and ergonomic control handle for easier control of the turning on and off • Armature connection threads are ¾” • Eccentric connection threads are ¾”-½” • Ideal working pressure 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended

Cartridge Diameter: Ø40

CATALOGUE

162

Energy Saving

Water Saving

Product Code & Name MEB45 Swivel Sink Armature

155

Surface Chrome

SINK

220

Features

• Special aerator with water saving (Bubble flow, with lime breaker, Flow rate: 8 lt/min) • Special cartridge with heat and flow rate adjustment • Long and ergonomic control handle for easier control of the turning on and off • With swivel spout • Length of outlet is 220 mm • Height of outlet 155 mm • Measurements of Hot & Cold water flex hose connection are M10x1- ⅜’’ (or ½’’) 40 cm • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filtered interval tap at the entrance of the flat is recommended.

Cartridge Diameter: Ø40

Product Code & Name MAE45 Applique Sink Armature

ø65

Surface Chrome Features

140- 160

G1/ 2"

275

• Special aerator with water saving (Bubble flow, with lime breaker, Flow rate: 8 lt/min) • Special cartridge with heat and flow rate adjustment • Long and ergonomic control handle for easier control of the turning on and off • With swivel spout • Length of outlet is 275 mm • Armature connection threads are ¾” • Eccentric connection threads are ¾” – ½” • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended.

Cartridge Diameter: Ø40

NOTES

CATALOGUE

163

NEW EMBEDDED BATHROOM& SHOWER ARMATURES

CATALOGUE

164

CATALOGUE

165

NEW EMBEDDED BATHROOM & SHOWER ARMATURES Product Code & Name SAG01 Ø35mm Embedded Bathroom Armature Recessed Housing Group

Features

• Special cartridge with heat and flow rate adjustment • Recessed body with plastic safety cover • Plumbing connections size ½” • Can be used with SUG85 ,SUG105 • Can be used with Ritmo and Fuego series related codes

G 1/2"

G 1/2"

130,8

G 1/2"

63,8

Min 45,50 Max 53,2

Product Code & Name SAG02 Ø40mm Embedded Bathroom Armature Recessed Housing Group

Features

• Special cartridge with heat and flow rate adjustment • Recessed body with plastic safety cover • Plumbing connections size ½” • Can be used with SUG35 ,SUG20, SUG10, SUG70 • Can be used with Kalipso, Flamengo, Espina,Nova series related codes

Product Code & Name SAG03 Ø35mm Embedded Bathroom Armature Recessed Housing Group

Features

• Special cartridge with heat and flow rate adjustment • Recessed body with plastic safety cover • Plumbing connections size ½” • Can be used with SUG75-SUG65-SUG55-SUG80-SUG120 • Can be used with Felis, Atros,Solus,Eko,Adrio series related codes

CATALOGUE

166

Energy Saving

Water Saving

Product Code & Name SAG06 Ø35mm Embedded Shower Armature Recessed Housing Group

Features

• Special cartridge with heat and flow rate adjustment • Recessed body with plastic safety cover • Plumbing connections size ½” • Can be used with SUD120,SUD55,SUD65,SUD80 • Can be used with Eko,Adrio,Solus,Atros series related codes

CATALOGUE

167

NEW EMBEDDED BATHROOM & SHOWER ARMATURES Product Code & Name SUD120 Adrio Embedded Over Plaster Shower Group

Surface Chrome Features

• Ø35mm • Rosette lenght is 140 mm • Oval rosette • Rosette height is 9 mm • Rosette width is 108 mm • with Adrio handle Product Code & Name SUD80 Eko Embedded Over Plaster Shower Group

Surface Chrome Features

• Ø35mm • Rosette lenght is 140 mm • Oval rosette • Rosette height is 9 mm • Rosette width is 108 mm • with eko handle

Product Code & Name SUD55 Solus Embedded Over Plaster Shower Group

Surface Chrome Features

• Ø35mm • Rosette lenght is 140 mm • Oval rosette • Rosette height is 9 mm • Rosette width is 108 mm • with Solus handle

Product Code & Name SUD65 Atros Embedded Over Plaster Shower Group

Surface Chrome Features

• Ø35mm • Rosette lenght is 140 mm • Oval rosette • Rosette height is 9 mm • Rosette width is 108 mm • with Atros handle

Product Code & Name SUG120 Adrio Embedded Bathroom Over Plaster Group

Surface Chrome Features

• Ø35mm • Rosette lenght is 193,5 mm • Oval rosette • Rosette height is 9 mm • Rosette width is 128 mm • with Adrio handle • Divertor group shown in picture is not included CATALOGUE

168

Energy Saving

Water Saving

Product Code & Name SUG80 Eko Embedded Bathroom Over Plaster Group

Surface Chrome Features

• Ø35mm • Rosette lenght is 193,5 mm • Oval rosette • Rosette height is 9 mm • Rosette width is 128 mm • with Eko handle • Divertor group shown in picture is not included Product Code & Name SUG55 Solus Embedded Bathroom Over Plaster Group

Surface Chrome Features

• Ø35mm • Rosette lenght is 193,5 mm • Oval rosette • Rosette height is 9 mm • Rosette width is 128 mm • with Solus handle • Divertor group shown in picture is not included Product Code & Name SUG10 Flamengo Embedded Bathroom Over Plaster Group

Surface Chrome Features

• Ø40mm • Rosette lenght is 193,5 mm • Oval rosette • Rosette height is 9 mm • Rosette width is 128 mm • with Flamengo handle • Divertor group shown in picture is not included Product Code & Name SUG70 Espina Embedded Bathroom Over Plaster Group

Surface Chrome Features

• Ø40mm • Rosette lenght is 193,5 mm • Oval rosette • Rosette height is 9 mm • Rosette width is 128 mm • with Espina handle • Divertor group shown in picture is not included

Product Code & Name SUG20 Kalipso Embedded Bathroom Over Plaster Group

Surface Features

Chrome

• Ø40mm • Rosette lenght is 193,5 mm • Oval rosette • Rosette height is 9 mm • Rosette width is 128 mm • with Kalipso handle • Divertor group shown in picture is not included CATALOGUE

169

NEW EMBEDDED BATHROOM & SHOWER ARMATURES Product Code & Name SUG65 Atros Embedded Bathroom Over Plaster Group

Surface Chrome Features

• Ø35mm • Rosette lenght is 193,5 mm • Oval rosette • Rosette height is 9 mm • Rosette width is 128 mm • with Atros handle • Divertor group shown in picture is not included Product Code & Name

128 9

SUG75

193,50

Felis Embedded Bathroom Over Plaster Group

Surface Chrome Features

• Ø35mm • Rosette lenght is 193,5 mm • Oval rosette • Rosette height is 9 mm • Rosette width is 128 mm • with Felis handle • Divertor group shown in picture is not included Product Code & Name SUG35 Nova Embedded Bathroom Over Plaster Group

Surface Chrome Features

• Rosette lenght is 193,5 mm • Ø40mm • Oval rosette • Rosette height is 9 mm • Rosette width is 128 mm • with Nova handle • Divertor group shown in picture is not included Product Code & Name SUG85 Ritmo Embedded Bathroom Over Plaster Group

Surface Chrome Features

• Ø35mm • Rosette width is 128 mm • Rectangle rosette and • Rosette lenght is 193,5 mm square divertor handhold • Rosette height is 9 mm • Square cartridge cover • with Ritmo handle • Sub divertor group shown in picture is not included Product Code & Name SUG105 Fuego Embedded Bathroom Over Plaster Group

Surface Chrome Features

• Ø35mm • Rectangle rosette and square divertor handhold • Square cartridge cover

• Rosette width is 128 mm • Rosette lenght is 193,5 mm • Rosette height is 9 mm • with Fuego handle

• Sub divertor group shown in picture is not included CATALOGUE

170

Energy Saving

Product Code & Name GGR01 Spout Group without Divertor

Surface

Chrome

Product Code & Name GGR08 Spout Group with Divertor

Surface

Chrome

Product Code & Name GGR13 Ritmo Spout Group without Divertor

Surface

Chrome

Water Saving

Features

• Special aerator m24x1

(Bubble flow, with lime breaker, Flow rate: 16 lt/min)

• Lenght of spout is 120 mm • Wall connection nipple ¾”, suitable for ½” nipple connection

Features

• Special aerator m28x1

(Bubble flow, with lime breaker, Flow rate: 16 lt/min) Lenght of spout is 125 mm Divertor with locking system Rosette diameter ø66 Wall connection nipple ¾”, suitable for ½” nipple connection

• • • •

Features

• Special aerator m28x1

(Bubble flow, with lime breaker, Flow rate: 16 lt/min) Lenght of spout is 130 mm Rosette diameter 66x66mm Wall connection nipple ¾”, suitable for ½” nipple connection

• • •

CATALOGUE

171

NEW EMBEDDED BATHROOM & SHOWER ARMATURES Product Code & Name GGR12 Ritmo Spout Group with Divertor

Surface Chrome

Features

• Special aerator m28x1

(Bubble flow, with lime breaker, Flow rate: 16 lt/min) Lenght of spout is 130 mm Rosette diameter 66x66mm Wall connection nipple ¾”, suitable for ½” nipple connection

• • •

Product Code & Name GGR14 Fuego Spout Group with Divertor

Surface Chrome

Features

• Natural water flow, without aerator • Lenght of spout is 140 mm • Rosette diameter 66x66mm • Wall connection nipple ¾”, suitable for ½” nipple connection

Product Code & Name GGR04 Embedded Cabine Shower Adaptor (square)

Surface Chrome

CATALOGUE

172

Features

• It can be used together with

embedded armatures by connecting on the water outlet of the fitting (only when water outlet is required for the hand shower) Wall connection nipple ½”

•

Energy Saving

Water Saving

Product Code & Name GGR05 Embedded Cabine Shower Adaptor (round)

Surface Chrome

Features

• It can be used together with

embedded armatures by connecting on the water outlet of the fitting (only when water outlet is required for the hand shower) Wall connection nipple ½”

•

G 1/2"

Product Code & Name BRG84 275

Beak Installation Group for Embedded Bath Shower Armature

Surface Brass G

Features

• Suitable for outlet

connection of mta and mab codes

• For recessed installation during rough construction • Brass material • Suitable size for ¾” connection

" 3/4

25

Product Code & Name NPL140

Features

• Brass nipple for built in installations

Installation Nipple with brass inserts (½” -½”)

Surface Brass

CATALOGUE

173

SHOWER SYSTEMS WATER THERAPY

CATALOGUE

174

CATALOGUE

175

SHOWER SETS Product Code & Name DST15 Suspended Shower Set (Ø69)

Surface Chrome Features

• Single function • with lime breaker • Massage effect • 150 cm spiral hose (½”-½”) • with ½”-¾” adaptor 150 cm Spiral Hose (G 1/2"-G 1/2")

Product Code & Name DST13 Suspended Shower Set (with 5 Functions) (Ø120)

Surface Chrome Features

150 cm Spiral Hose

• 5 Functions with lime breaker • Massage effect • 150 cm spiral hose (½” – ½”) • with ½” – ¾” adaptor

(G 1/2"-G 1/2")

Product Code & Name DST26 Shower Set with Hanger (45x70)

Surface Chrome Features

150 cm Spiral Hose (G 1/2"-G 1/2")

CATALOGUE

176

• Square design hand shower and hanger • Single function • with lime breaker • Massage effect • 150 cm spiral hose (½”-½”) • with ½”-¾” adaptor

Energy Saving

Water Saving

Product Code & Name DST37 Shower Set with Hanger (Single Function 80X125)

Surface Chrome Features

150 cm Spiral Hose (G 1/2" - G 1/2")

• Single function • With lime breaker • Massage effect • 150 cm spiral hose (½”-½”) • with ½”-¾” adaptor

Product Code & Name DST38 Shower Set with Hanger (2 Functions Ø130)

Surface Chrome Features 150 cm Spiral Hose (G 1/2" - G 1/2")

• 2 Functions (2.function with waterfall flow) • With lime breaker • Massage effect • 150 cm spiral hose (½”-½”) • with ½”-¾” adaptor

Product Code & Name DST39 Shower Set with Hanger (Single Function Ø150)

Surface Chrome Features 150 cm Spiral Hose (G 1/2" - G 1/2")

• Single function • With lime breaker • Massage effect • 150 cm spiral hose (½”-½”) • with ½”-¾” adaptor

CATALOGUE

177

SHOWER SETS Product Code & Name DST40 Shower Set with Hanger (Single Function Ø95)

Surface Chrome Features 150 cm Spiral Hose (G 1/2" - G 1/2")

• Single function • With lime breaker • Massage effect • 150 cm spiral hose (½”-½”) • with ½”-¾” adaptor

Product Code & Name DST41 Shower Set with Hanger (3 Functions 120X125)

Surface Chrome Features 150 cm Spiral Hose (G 1/2" - G 1/2")

• 3 Functions (White front side) • With lime breaker • Massage effect • 150 cm spiral hose (½”-½”) • with ½”-¾” adaptor

Product Code & Name DST42 Shower Set with Hanger (5 Functions Ø95)

Surface Chrome Features 150 cm Spiral Hose (G 1/2" - G 1/2")

CATALOGUE

178

• 5 Functions • With lime breaker • Massage effect • 150 cm spiral hose (½”-½”) • with ½”-¾” adaptor

Energy Saving

Water Saving

Product Code & Name DST43 Shower Set with Hanger (3 Functions Ø110)

Surface Chrome

150 cm Spiral Hose (G 1/2" - G 1/2")

Features

• 3 Functions • With lime breaker • Massage effect • 150 cm spiral hose (½”-½”) • with ½”-¾” adaptor

Product Code & Name DST16 Sliding Shower Set (with 3 Functions) Ø75

Surface Chrome Features

150 cm Spiral Hose (G1/2"-G1/2" )

• 3 Functions • With lime breaker • Massage effect • Sliding (Bolt length: 60 cm) • 150 cm spiral hose (½” – ½”) • with ½” – ¾” adaptor

Product Code & Name DST30 Sliding Shower Set (Single Function 80X125)

Surface Chrome 150 cm Spiral Hose (G 1/2" - G 1/2")

83 cm

Features

• Single function • With lime breaker • Massage effect • Sliding (Bolt length:70 cm) • 150 cm spiral hose (½”-½”) • Wide console design assuming both console and hanger (Console size: 25x13 cm) • with ½”-¾” adaptor 25 cm

CATALOGUE

179

SHOWER SETS Product Code & Name DST31 Sliding Shower Set (2 Functions Ø130)

Surface Chrome 150 cm Spiral Hose (G 1/2" - G 1/2")

83 cm

Features

• 2 Functions (2 functions with waterfall flow) • With lime breaker • Massage effect • Sliding (Bolt length:70 cm) • 150 cm spiral hose (½”-½”) • Wide console design assuming both console and hanger (Console size: 25x13 cm) • with ½”-¾” adaptor

25 cm

Product Code & Name DST32 Sliding Shower Set (Single Function Ø150)

Surface Chrome 150 cm Spiral Hose (G 1/2" - G 1/2")

83 cm

Features

• Single function • With lime breaker • Massage effect • Sliding (Bolt length:70 cm) • 150 cm spiral hose (½”-½”) • Wide console design assuming both console and hanger (Console size: 25x13 cm) • with ½”-¾” adaptor

25 cm

Product Code & Name DST33 Sliding Shower Set (Single Function Ø95)

Surface Chrome

150 cm Spiral Hose (G 1/2" - G 1/2")

83 cm

Features

• Single function • With lime breaker • Massage effect • Sliding (Bolt length:70 cm) • 150 cm spiral hose (½”-½”) • Wide console design assuming both console and hanger (Console size: 25x13 cm) • with ½”-¾” adaptor 25 cm

CATALOGUE

180

Energy Saving

Water Saving

Product Code & Name DST34 Sliding Shower Set (3 Functions 120X125)

Surface Beyaz Chrome 150 cm Spiral Hose (G 1/2" - G 1/2")

Features

83 cm

• 3 Functions (White front side) • With lime breaker • Massage effect • Sliding (Bolt length:70 cm) • 150 cm spiral hose (½”-½”) • Wide console design assuming both console and hanger (Console size: 25x13 cm) • with ½”-¾” adaptor

25 cm

Product Code & Name DST35 Sliding Shower Set (5 Functions Ø95)

Surface Chrome 150 cm Spiral Hose (G 1/2" - G 1/2")

83 cm

Features

• 5 Functions • With lime breaker • Massage effect • Sliding (Bolt length:70 cm) • 150 cm spiral hose (½”-½”) • Wide console design assuming both console and hanger (Console size: 25x13 cm) • with ½”-¾” adaptor 25 cm

Product Code & Name DST36 Sliding Shower Set (3 Functions Ø110)

Surface Chrome 150 cm Spiral Hose (G 1/2" - G 1/2")

83 cm

Features

• 3 Functions • With lime breaker • Massage effect • Sliding (Bolt length:70 cm) • 150 cm spiral hose (½”-½”) • Wide console design assuming both console and hanger (Console size: 25x13 cm) • with ½”-¾” adaptor

25 cm

CATALOGUE

181

SHOWER SETS 350

Product Code & Name DST19-1

min.950 - max.1370

0 ø20

Shower Set (5 Functions with Hand Shower)

Surface Chrome Features

• 5 Functions Shower Head • Embedded shower head with rain flow (Ø200) • Height adjustable set with sliding • 150 cm and 50 cm spiral hose • Diverting unit to embedded shower head or to the hand shower head brass

320

Product Code & Name DST21 Shower Set (5 Functions with Hand Shower)+(MDU80)

min.950 - max.1370

0 ø25 G 1/2"

Ø70

56

140-160

G 1/2"

Surface Chrome Features

• Hand shower with 5 Functions • Embedded shower head with rain flow (Ø250) • Height adjustable set with sliding • 150 cm spiral hose • Diverting unit to embedded shower head or to the hand shower head (brass) • Shower armature that can be connected directly without spiral hose

Product Code & Name

320

G 1/2"

56

Ø70

0 25

Surface Chrome Features

G 1/2"

250

Shower Set (5 Functions with Hand Shower)+(MDU80)

140-160

min.950 - max.1370

DST22

• Hand shower with 5 Functions • Embedded shower head with rain flow (250x250) • Height adjustable set with sliding • 150 cm spiral hose • Diverting unit to embedded shower head or to the hand shower head (brass) • Shower armature that can be connected directly without spiral hose

CATALOGUE

182

Energy Saving

Water Saving

350

Product Code & Name DST23 Shower Set (5 Functions with Hand Shower) min.950 - max.1370

0 ø25

Surface Chrome Features

• Hand shower with 5 Functions • Embedded shower head with rain flow (Ø250) • Height adjustable set with sliding • 150 cm and 50 cm spiral hose • Diverting unit to embedded shower head or to the hand shower head (brass)

350

Product Code & Name DST24 25

min.950 - max.1370

250

Shower Set (5 Functions with Hand Shower)

0

Surface Chrome Features

• Hand shower with 5 Functions • Embedded shower head with rain flow (250x250) • Height adjustable set with sliding • 150 cm and 50 cm spiral hose • Diverting unit to embedded shower head or to the hand shower head (brass)

Product Code & Name

365

206

DST27 - A Shower Set Surface PVD Coating (Gold Effect)

206

Min 875 - Max 1225

DST27 Shower Set Surface Chrome Features 140-160

G 1/2"

70

G 3/4"

• Special classic hand shower 1 f • Embedded shower head with rain flow ( ø 206) • Height adjustable set with sliding • 150 cm spiral hose • With bath mixer • Diverting unit to embedded shower head or to the hand shower head with ½”-¾” adaptor

G 1/2" 60 167

CATALOGUE

183

SHOWER SETS 100

Product Code & Name DST28-A Shower Set with Hanger

Surface PVD Coating (Gold Effect) Features

• Hand shower 1 f • 150 cm spiral hose • with ½”-¾” adaptor 150 cm Spiral Hose (G 1/2"- G 1/2")

78

Product Code & Name DST29 Shower Set with Hanger (Ø78)

Surface Chrome Features

• Special classic hand shower 1 f • 150 cm spiral hose • with ½”-¾” adaptor 150 cm Spiral Hose (G 1/2"- G 1/2")

78

Product Code & Name DST29 - A Shower Set with Hanger (Ø78)

Surface PVD Coating (Gold Effect) Features

• Special classic hand shower 1 f • 150 cm spiral hose • with ½”-¾” adaptor 150 cm Spiral Hose (G 1/2"- G 1/2")

CATALOGUE

184

Energy Saving

Water Saving

Product Code & Name

140

ADS02 Embedded Shower Head (Ø97) (with 3 Functions)

Surface Chrome Features

• Brass pipe group • 3 Functions (Ø97 mm) • With lime breaker • Massage effect • Bend distance is 140 mm Ø97 ADS02- 3 FONKSİYONLU ANKASTRE DUŞ BAŞLIĞI (Ø97)

Product Code & Name

140

ADS03 Embedded Shower Head (Ø85) (with 5 Functions)

Surface Chrome Features

• Brass pipe group • 5 Functions (Ø85 mm) • With lime breaker • Massage effect • Bend distance is 140 mm 5 Ø8

Product Code & Name ADS05 400

Embedded Shower Head (200x200)

Surface Chrome Features

• Embedded shower head with rain flow (200x200) • Bend distance is 400 mm • Brass pipe group ADS05-ANKASTRE DUŞ SETİ

CATALOGUE

185

SHOWER HEADS Product Code & Name ADS07 Embedded Shower Head Ø200

Surface Chrome Features

• Embedded shower head with rain flow (plastic) • Bend distance is 400 mm • Brass pipe group

G1/2"

Product Code & Name ADS10

300

Embedded Shower Head (200X200-Ceiling Outlet)

Surface Chrome Features

• Embedded shower head with rain flow (200x200) • Ceiling Space 300 mm • Brass pipe group

ADS10-ANKASTRE DUŞ SETİ

G1/2"

Product Code & Name ADS11

300

Embedded Shower Head (Ø200-Ceiling Outlet)

Surface Chrome Features

• Embedded shower head with rain flow (plastic shower head) (Ø200) • Ceiling Space 300 mm • Brass pipe group Ø200

ADS11-ANKASTRE DUŞ SETİ

CATALOGUE

186

Energy Saving

Water Saving

Product Code & Name ADS13

400

Embedded Shower Head (250X250)

Surface Chrome 0 25

250

Features

• Embedded shower head with rain flow (250x250) • Bend distance 400 mm • Brass pipe group

Product Code & Name

400

ADS14 Embedded Shower Head Ø250

Surface Chrome Features 0 Ø2 5

• Embedded shower head with rain flow • Bend distance is 400 mm • Brass pipe group

ADS14-ANKASTRE DUŞ SETİ

G 1/2"

Product Code & Name ADS15 Embedded Shower Head-Ceilling Outlet (250x250) 300

Surface Chrome Features

250

• Embedded shower head with rain flow (250x250) • Ceiling Space 300 mm • Brass pipe group

250

G 1/2"

Product Code & Name ADS16 300

Embedded Shower Head-Ceilling Outlet (Ø250)

Surface Chrome Features

• Embedded shower head with rain flow (Ø250) • Ceiling Space 300 mm • Brass pipe group Ø250

CATALOGUE

187

SHOWER PANELS Product Code & Name DSP01 Shower Panel

Surface

Gold (Rose Gold)

Features

• Plating in form of gold • Stainless steel • Dimensions: 150x20 cm • 6 Pieces active water jets • Thermostatic control • 150 cm spiral hose (½”-½”) • Single function hand shower ( massage effect, with lime breaker) • Divertor unit to overhead shower, water jets and hand shower • Ideal operation pressure 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended

Product Code & Name DSP02 Shower Panel

Surface Glossy Black Features 150 cm Spiral Hose G 1/2"-G 1/2"

• Plating in form of glossy black • Stainless steel • Dimensions: 150x20 cm- free water flow (waterfall) • 6 Pieces active water jets • Thermostatic control • 150 cm spiral hose (½”-½”) • Single function hand shower ( massage effect, with lime breaker) • Divertor unit to overhead shower, water jets and hand shower • Ideal operation pressure 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended

Product Code & Name DSP03 Shower Panel

Surface Inox Features

150 cm Spiral Hose

• Plating in form of ınox • Stainless steel • Dimensions: 110x30 cm- free water flow (waterfall) • 4 Pieces active water jets • Thermostatic control • 150 cm spiral hose (½”-½”) • Single function hand shower ( massage effect, with lime breaker) • Divertor unit to overhead shower, water jets and hand shower • Ideal operation pressure 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended

CATALOGUE

188

Energy Saving

Water Saving

Product Code & Name DSP04 Shower Column

Surface Aluminium+Glass Features

150 cm Spiral Hose

• Glass front panel • Aluminium • Dimensions: 120x10,3 cm • Active ø200 overhead shower • 8 Pieces active water jets • 150 cm spiral hose (½”-½”) • Single function hand shower ( massage effect, with lime breaker) • Divertor unit to overhead shower, water jets and hand shower • Ideal operation pressure 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended

Product Code & Name DSP06 Shower Panel

Surface Bamboo Features

150 cm Spiral Hose

• Plating in form of bamboo • Stainless steel • Dimensions: 150x20 cm- free water flow (waterfall) • 6 Pieces active water jets • Thermostatic control • 150 cm spiral hose (½”-½”) • Single function hand shower ( massage effect, with lime breaker) • Divertor unit to overhead shower, water jets and hand shower • Ideal operation pressure 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended

Product Code & Name DSP07 Shower Panel

Surface White+Glass Features

150 cm Spiral Hose

• Glass front panel • Stainless steel • Dimensions: 150x20 cm- free water flow (waterfall) • Led lighting behind the control panel • 6 Pieces active water jets • Thermostatic control • 150 cm spiral hose (½”-½”) • Single function hand shower ( massage effect, with lime breaker) • Divertor unit to overhead shower, water jets and hand shower • Ideal operation pressure 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings, a filter at the entrance of the flat is recommended

CATALOGUE

189

SUPPLEMENTARY PRODUCTS

CATALOGUE

190

CATALOGUE

191

ÜÇÜNCÜ KISILERE VERILEMEZ . BASKA MAKSATLA KULLANILAMAZ HER HAKKI SAKLIDIR.

SUPPLEMENTARY PRODUCTS Product Code & Name FKM01 G1/2"

BU RESIM GUL PRES DOKUM SANAYI A.S. NIN MALIDIR. IZINSIZ KOPYALANAMAZ. ÜÇÜNCÜ KISILERE VERILEMEZ . BASKA MAKSATLA KULLANILAMAZ HER HAKKI SAKLIDIR.

Surface Chrome Features

• Spherical turning on/off • Rosette diameter is Ø55 mm • Suitable size for ⅜” connection • Tap – wall connection size is ½”

FKM01 FİLTRE ARA MUSLUK

Features

• Spherical turning on/off • Rosette diameter is Ø55 mm • Suitable size for ½” connection • Tap – wall connection size is ½”

Product Code & Name FKM03 Filtered Interval Tap (Ceramic Packing)

Surface Chrome

G1/2"

RESIM ÜZERINDEN ÖLÇÜ ALMAYINIZ

BU RESIM GUL PRES DOKUM SANAYI A.S. NIN MALIDIR. IZINSIZ KOPYALANAMAZ.

FKM01-2

Filtered Interval Tap

Features

• 90° ceramic stemmer with turning on/off angle • Rosette diameter is Ø55 mm • The cap for cleaning the filter can be opened easily by using the coin shape slot on the cap • Suitable size for ⅜” connection • Tap – wall connection size is ½”

FKM03 FİLTRELİ ARA MUSLUK

Product Code & Name CMS03 Surface Chrome

G 1/2"

Ø55

Filtered Laundry Tap(90°)

Features G 3/4" 55

• 90° ceramic stemmer with turning on/off angle • Rosette diameter is Ø55 mm • Suitable size for ⅜” connection • Tap – wall connection size is ½” • Can be reverted to ⅜” by removing ¾” adaptor.

Product Code & Name TMS01

TMS01-2

Interval Tap

Surface Chrome Features

• 90° ceramic stemmer with turning on/off angle • Rosette diameter is Ø55 mm • Suitable size for ⅜” connection • Tap – wall connection size is ½”

CATALOGUE

192

Features

• 90° ceramic stemmer with turning on/off angle • Rosette diameter is Ø55 mm • Suitable size for ½” connection • Tap – wall connection size is ½”

ÜÇÜNCÜ KISILERE VERILEMEZ . BASKA MAKSATLA KULLANILAMAZ HER HAKKI SAKLIDIR.

Energy Saving

Water Saving

Product Code & Name RDK07

G3/8"

Laundry Tap Reduction

Surface Chrome Features

• It provides for all types of interval taps to be used as Laundry Tap. • This product is compatible with GPD products listed below.

• TMS 01 • TMS 13 • TMS 90 • TMS 03 • TMS 15 • FKM 01 • TMS 05 • TMS 70 • FKM 03

BU RESIM GUL PRES DOKUM SANAYI A.S. NIN MALIDIR. IZINSIZ KOPYALANAMAZ.

G3/4"

Product Code & Name STS01 Spray Bidet Set

Surface Chrome

RDK07 G3/8"-G3/4" REDİKSİYON Features • Ergonomic design for the spray hand shower • with ⅜”-½” • System, which provides flow of water when the button on hand shower is pressed • Spiral hose length is 100 cm • Water outlet can be obtained from hand shower by adapting it on the systems that do not have Interval tap

RESIM ÜZERINDEN ÖLÇÜ ALMAYINIZ

REVIZYON NO:0

YAYIN TARIHI:01/01/2003

Product Code & Name STS02 Spiral Bidet Set

Surface Chrome Features

• M24X1 aerator • with ⅜”-½” • Length of spiral hose: 100 cm

45,5

Product Code & Name 106,5

STS03 Spray Bidet Set ( Brass Square shape , without reduction)

18

Surface Chrome Features 23,5

FR-FM-01-003

37,5

100cm Spiral Hose (G 1/2"-G1/2")

• Brass handshower and hanger • Stainless steel spiral hose 100 cm • Water outlet can be optained from hand shower by adapting it on the systems that do not have interval tap

CATALOGUE

193

SUPPLEMENTARY PRODUCTS 20,20

55

Product Code & Name 112,8

STS04 Spray Bidet Set ( Brass Round shape , without reduction)

Surface Chrome

20

Features 44

• Brass handshower and hanger • Stainless steel spiral hose 100 cm • Water outlet can be optained from hand shower by adapting it

100 cm Spiral Hose (G 1/2"-G1/2")

on the systems that do not have interval tap

Product Code & Name PUP01 Pop-Up Unit

Surface Chrome Features

• Suitable with washbasins which has flowage hole • Vertical lever (behind of the armature) • G 1 ¼’’ connection • Size 37 mm can be adjusted up to maximum 45 mm

37

8,5

Ø62,5

87

Ø60

50

Ø43,5

G1 1/4" 195

Product Code & Name PUP02

A.A 45 2

Pop-Up Unit (Click-Clack)

A.A 45

5

11,5 71

• Suitable with washbasins which is without flowage hole • G 1 ¼’’ connection Product Code & Name PUP03 Ø62,5

Ø60

Ø44

G1 1/4"

2,

Features

8,5

G1 1/4"

76

Ø6

Surface Chrome

Ø62

G1 1/4"

Ø60

Ø6

19 8,5

Pop-Up Unit (Click-Clack) (Long Nut)

Features

• Suitable with washbasins which has flowage hole • G 1 ¼’’ connection

Surface Chrome

Product Code & Name PUP04 Pop-Up Unit (Click-Clack)

Surface Chrome

CATALOGUE

194

Features

• Suitable for washbasins which has flowage hole • G 1 ¼” connection

Energy Saving

Product Code & Name Features

max.330

49,50 G1 1/4"

• G 1 ¼’’ entrance • Metal handbasin • Between washbasin trap center

SFN01

min.76 - max.300

Trap

Ø32

min.69 max.125

Ø70

Water Saving

and wall is minimum 76 maximum 325 mm Suitability of the sizes to the wash basin, has to be checked Suitable with PUP01, PUP02 and PUP03

Surface Chrome

80

• •

Ø50

Ø9x38

M24x1

Product Code & Name 40

41

AUG01

Ø9x38

Embedded Interval Features Stop Extension Group • Extension rod and cone

for embedded stop valve (for AAK70 / AAK05 models) Extension size 3 cm

Surface Chrome

M24x1

•

Ø26

Ø12

Product Code & Name AUG02

Embedded Interval Features Stop Extension Group • Extension rod and cone M5

for embedded stop valve (for AAK71 / AAK72 models) Extension size 3 cm

Surface Chrome

•

Product Code & Name

Features

30

88

ASK017

• Square hanger for hand shower

42

Square Hanger

Surface Chrome 31

G3/8"

Product Code & Name FTA 01 Filtered Water Saving Adaptor

Surface Chrome PROPRIETARY PRODUCT DESIGN G3/8"

Product Code & Name

G1/2"

FR-FM-01-001

RESIM ÜZERINDEN ÖLÇÜ ALMAYINIZ

G1/2"

G1/2" G1/2"

50

G1/2" G1/2"

30

40

G1/2"

10

15

20

25

G1/2"

G1/2"

G1/2"

G1/2"

G1/2"

UZT01 1 cm Extension UZT02 1,5 cm Extension UZT03 2 cm Extension UZT04 2,5 cm Extension UZT05 3 cm Extension UZT06 4 cm Extension UZT07 5 cm Extension Surface Chrome

G1/2"

G1/2"

REVIZYON NO:0

YAYIN TARIHI:01/01/2003

Features

• It is used to filter on the fittings that have interval taps without filters.

• (In this way there is not any need to change the interval tap without filter) • It provides water savings up to 50% with the help of flow rate reducing feature) • Two different flow rates can be obtained with the help of the flow rate reducers that come with the product

Product Code & Name TMZ01 Cleaner and Polishing for Armature

Features

• Resolving lime • Making extra shine • Does not harm the armature • Delaying the calcification CATALOGUE

195

INDUSTRIAL PRODUCTS

CATALOGUE

196

CATALOGUE

197

BALL VALVES FOR WATER & GAS TS EN 331

TS EN 13828

CATALOGUE

198

Product Code & Name

Diameter

Surface

½” ¾” 1” 1 ¼” 1 ½” 2”

Nickel Nickel Nickel Nickel Nickel Nickel

½” ¾” 1” 1 ¼” 1 ½” 2” 2 ½” 3” 4”

Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel

KRS30 KRS31 KRS32 KRS33 KRS34 KRS35

Combustible Gas Ball Valve (0,5 Bar)

KRS40 KRS41 KRS42 KRS43 KRS44 KRS45 KRS46 KRS47 KRS48

Ball Valve PN10

KRS15

Mini Ball Valve (m-f)

½”

Nickel

KRS91 KRS92

Secured Combustible Gas Ball Valve (5-20 Bar)

¾” 1”

Nickel Nickel

KRS70 KRS71

Butterfly Handle Ball Valve ( m-f )

½” ¾”

Nickel Nickel

Combustible Gas Ball Valve (0,5 Bar) Combustible Gas Ball Valve (0,5 Bar) Combustible Gas Ball Valve (0,5 Bar) Combustible Gas Ball Valve (0,5 Bar) Combustible Gas Ball Valve (0,5 Bar)

Ball Valve PN10 Ball Valve PN10 Ball Valve PN10 Ball Valve PN10 Ball Valve PN10 Ball Valve PN10 Ball Valve PN10 Ball Valve PN10

Secured Combustible Gas Ball Valve (5-20 Bar)

Butterfly Handle Ball Valve ( m-f )

Product Code & Name

Diameter

Surface

½” ¾” 1” 1 ¼”

Nickel Nickel Nickel Nickel

Nickel Nickel

KRS60 KRS61 KRS62 KRS63

Butterfly Handle Ball Valve ( f-f )

KRS28 KRS29

Ball Valve with Union Ball Valve with Union

¾” 1”

KRS27

Drain Ball Tap

¾”

Nickel

KRS59

Drain Ball Tap (with Union)

¾”

Nickel

KRS72

Drain Ball Tap with Union (f-f)

¾”

Nickel

KRS26

Ball Tap with Trunk Union ( Butterfly Hd.)

½”

Butterfly Handle Ball Valve ( f-f ) Butterfly Handle Ball Valve ( f-f ) Butterfly Handle Ball Valve ( f-f )

Nickel

CATALOGUE

199

BALL VALVES FOR WATER & GAS Product Code & Name

CATALOGUE

200

Diameter

Surface

KRS77

Ball Tap (SteelHandle)

½”

Nickel

KRS49 KRS58

Ball Tap with Trank Union (Steel Hd.)

½” ¾”

Nickel Nickel

KRS96 KRS97

Filtered Ball Valve

½” ¾”

Nickel Nickel

KRS65 KRS66

Thermocouple Ball Valve Thermocouple Ball Valve

¾” 1”

Nickel Nickel

KRS68

Thermocouple Ball Valve with Union

1”

Nickel

AKV01 AKV03

Coupled Ball Valve with Union

AKV02 AKV04

Coupled Ball Valve (Angle)

Ball Tap with Trank Union (Steel Hd.)

Filtered Ball Valve

Coupled Ball Valve with Union

Coupled Ball Valve (Angle)

1” 1 ¼”

Nickel Nickel

1” 1 ¼”

Nickel Nickel

Water Saving Saving SCREWEL VALVESEnergy FOR WATER (TS EN 12288)

Product Code & Name

Diameter

Surface

SBR21 SBR22 SBR23 SBR24 SBR25 SBR26 SBR27 SBR28

Gate Valve Gate Valve Gate Valve Gate Valve Gate Valve Gate Valve Gate Valve Gate Valve

½” ¾” 1” 1 ¼” 1 ½” 2” 2 ½” 3”

Brass Brass Brass Brass Brass Brass Brass Brass

STP01 STP02 STP03 STP04 STP05

Stop Valve Stop Valve Stop Valve Stop Valve Stop Valve

½” ¾” 1” 1 ¼” 1 ½”

Brass Brass Brass Brass Brass

KSV21 KSV22 KSV23 KSV24 KSV25 KSV26

Blow-Off Valve Blow-Off Valve Blow-Off Valve Blow-Off Valve Blow-Off Valve Blow-Off Valve

½” ¾” 1” 1 ¼” 1 ½” 2”

Brass Brass Brass Brass Brass Brass

FLT01 FLT02 FLT03 FLT04 FLT05 FLT06

Filter Filter Filter Filter Filter Filter

½” ¾” 1” 1 ¼” 1 ½” 2”

Brass Brass Brass Brass Brass Brass

CCH01 CCH02 CCH03 CCH04 CCH05 CCH06

Swing Check Valve Swing Check Valve Swing Check Valve Swing Check Valve Swing Check Valve Swing Check Valve

½” ¾” 1” 1 ¼” 1 ½” 2”

Brass Brass Brass Brass Brass Brass

CHK01 CHK02 CHK03

Horizontal Check Valve

½” ¾” 1”

Brass Brass Brass

Horizontal Check Valve Horizontal Check Valve

CATALOGUE

201

RADIATOR VALVES Product Code & Name

Diameter

Surface

RDY08

Straight Radiator Valve

½”

Nickel

RDY03

Angle Radiator Valve

½”

Nickel

RDY15

Radiator Return Valve

½”

Nickel

RDY16

Thermostatic Angle Radiator Valve

½”

Nickel

½”

Nickel

½” ¾”

Brass Brass

½” ¾” 1”

Brass Brass Brass

STOCKS LIMITED

RDY20

Thermostatic Straight Radiator Valve

STOCKS LIMITED

CATALOGUE

202

RKR01 RKR02

Angle Radiator Union

RKR07 RKR08 RKR09

Straight Radiator Union

Angle Radiator Union

Straight Radiator Union Straight Radiator Union

Energy Water Saving Saving PRODUCTS FOR PROP INSTALLATION Product Code & Name

Diameter

Surface

Nickel Nickel Nickel

REG01 REG02 REG05

Water Pres.Regulator (with union)

½” ¾” 1”

REG07

Water Pres.Regulator (with union)

1 ¼”

Nickel

REG03 REG04 REG06 REG08

Water Pres.Regulator (F-F Threaded)

½” ¾” 1” 1 ¼”

Nickel Nickel Nickel Nickel

FRG02

Filtered Water Pres.Regulator (with Union)

¾”

Nickel

Water Pres.Regulator (with union) Water Pres.Regulator (with union)

Water Pres.Regulator (F-F Threaded) Water Pres.Regulator (without Union) Water Pres.Regulator (without Union)

PROPRIETARY PRODUCT

CATALOGUE

203

CONNECTION PRODUCTS

Product Code & Name

PROPRIETARY PRODUCT DESIGN

PROPRIETARY PRODUCT DESIGN

CATALOGUE

204

Diameter

Surface

BAV01 BAV02 BAV03 BAV04 BAV05

Valve with PE Pipe Adaptor Valve with PE Pipe Adaptor Valve with PE Pipe Adaptor Valve with PE Pipe Adaptor Valve with PE Pipe Adaptor

Ø25-Ø25 Ø32-Ø32 Ø40-Ø40 Ø50-Ø50 Ø63-Ø63

Nickel Nickel Nickel Nickel Nickel

BRB12 BRB13 BRB14 BRB15 BRB16 BRB17

Pipe Union Sleeve Pipe Union Sleeve Pipe Union Sleeve Pipe Union Sleeve Pipe Union Sleeve Pipe Union Sleeve

Ø20-Ø20 Ø25-Ø25 Ø32-Ø32 Ø40-Ø40 Ø50-Ø50 Ø63-Ø63

Nickel Nickel Nickel Nickel Nickel Nickel

BRB00 BRB01 BRB02 BRB03 BRB04 BRB05

Pipe Union Mouth (inside gear) Pipe Union Mouth (inside gear) Pipe Union Mouth (inside gear) Pipe Union Mouth (inside gear) Pipe Union Mouth (inside gear) Pipe Union Mouth (inside gear)

Ø20 ½” Ø25 ¾” Ø32 ¾” Ø32 1” Ø40 1 ¼” Ø40 1”

Nickel Nickel Nickel Nickel Nickel Nickel

BRB19 BRB20 BRB21

Pipe Union Mouth (outside gear)

Ø20 ½” Ø25 ¾” Ø32 1”

Nickel Nickel Nickel

ABV01 ABV04 ABV07 ABV10 ABV13

Connection Valve (from top)

Ø25 Ø32 Ø40 Ø50 Ø63

Nickel Nickel Nickel Nickel Nickel

ABV02 ABV05 ABV08 ABV11 ABV14

Connection Valve (On output)

Ø25 Ø32 Ø40 Ø50 Ø63

Nickel Nickel Nickel Nickel Nickel

Pipe Union Mouth (outside gear) Pipe Union Mouth (outside gear)

Connection Valve (from top) Connection Valve (from top) Connection Valve (from top) Connection Valve (from top)

Connection Valve (On output) Connection Valve (On output) Connection Valve (On output) Connection Valve (On output)

PROPRIETARY PRODUCT DESIGN

Product Code & Name

Diameter

Surface

Ø25 Ø32 Ø40 Ø50 Ø63

Nickel Nickel Nickel Nickel Nickel

¾” x 1 1” x -1 ¼”

Brass Brass

Ø20 Ø25 Ø40

Brass Brass Brass

½” - ¾” ¾” -1” 1” - 1 ¼” 1 ¼” - 1 ½” 1 ½” - 2” ¾” - 1 ¼” 1 ½” - ¾”

Brass Brass Brass Brass Brass Brass Brass

Brass Brass Brass Brass

Brass Brass Brass Brass Brass Brass

ABV03 ABV06 ABV09 ABV12 ABV15

Connection Valve (Double Ball) Connection Valve (Double Ball) Connection Valve (Double Ball) Connection Valve (Double Ball) Connection Valve (Double Ball)

PRZ01 PRZ05

Main Outlet Tap Main Outlet Tap

SYB01 SYB02 SYB03

Brass Fitting Counter

RDK01 RDK02 RDK03 RDK04 RDK05 RDK06 RDK08

Reduction Reduction Reduction Reduction Reduction Reduction Reduction

NPL01 NPL02 NPL03 NPL04

Nippel

Nippel

½” ¾” 1” 1 ¼”

KTP01 KTP02 KTP03 KTP04 KTP05 KTP06

Plug Plug Plug Plug Plug Plug

½” ¾” 1” 1 ¼” 1 ½” 2”

Brass Fitting Counter Brass Fitting Counter

Nippel Nippel

CATALOGUE

205

SPARE PARTS Product Code & Name

VOL001 VOL002 VOL003 VOL004 VOL005

CATALOGUE

206

Steel Flywheel Steel Flywheel Steel Flywheel Steel Flywheel Steel Flywheel

Diameter

Surface

50 mm 60 mm 70 mm 80 mm 100 mm

Paint Paint Paint Paint Paint

VOL060 Small Butterfly Flywheel (Blue Zinc) VOL061 Big Butterfly Flywheel (Red Zinc) VOL063 Small Butterfly Flywheel (Red Zinc)

Paint Paint Paint

VOL012 White Radiator Flywheel

Plastic

KOL056 Ball Valve Handle KOL109 Ball Valve Handle KOL114 Ball Valve Handle

½”-¾”- 1” 1 ¼” - 1 ½”- 2” 2 ½” -3”-4”

Plastic Plastic Plastic

KOL011 Ball Gas Valve Handle KOL013 Ball Gas Valve Handle

½”-¾”- 1 1 ¼” - 1 ½”- 2”

Plastic Plastic

SEMI-PRODUCTS Product Code & Name

Diameter

Surface

½” ¾” 1” 1 ¼” 1 ½” 2”

Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass

KPT01 KPT02 KPT03 KPT04 KPT05 KPT06

Stop-Blow Off Valve Cover Group

KPT13 KPT14 KPT15 KPT16 KPT17 KPT18

Blow Off Valve Cover Group

Blow Off Valve Cover Group

½” ¾” 1” 1 ¼” 1 ½” 2”

SLG23

Straight-Angle Radiator Valve Gasket Group

½”

Stop-Blow Off Valve Cover Group Stop-Blow Off Valve Cover Group Stop-Blow Off Valve Cover Group Stop-Blow Off Valve Cover Group Stop-Blow Off Valve Cover Group

Blow Off Valve Cover Group Blow Off Valve Cover Group Blow Off Valve Cover Group Blow Off Valve Cover Group

Brass

CATALOGUE

207

PLASTIC PRODUCTS

CATALOGUE

208

CATALOGUE

209

PLASTIC PRODUCTS

290

310-440

FIT01 Mechanic Cistern Mechanism

3/8"

Features • Single Push Mechanism with Extra Master Float Valve

2"

100

FIT02 3/6 Lt. Cistern Mechanism (Double Push)

3/8"

210

290

250-360

Features • Dual Flush Cistern with Extra Master Flator Valve

2"

100

FIT03 Pull Model Cistern Mechanism Features • Pull Model Cistern Mechanism with Extra Master Float Valve

CATALOGUE

210

290

310-440

FIT04 Mechanic Cistern Mechanism Features • Single Push Mechanism With Classic Master Float Valve

2"

3/8" 100

FIT05 Mechanic Cistern Mechanism Features 310-440

114

• Single Push Mechanism With New Era Float Valve

237

3/8" 1/2"

2"

FIT06 Pull Model Cistern Mechanism

114 240-390

• Pull Model Cistern Mechanism with New Era Float Valve

237

3/8" 1/2"

Features

2"

CATALOGUE

211

PLASTIC PRODUCTS 114

3/8" 1/2"

MFL01 Classic Master Float Valve

237

Features • Vertical Float Valve With Brass Water Inlet (⅜”) For Low Water Pressure

270

MFL02 Classic Master Float Valve Features • Vertical Float Valve with Plastic Inlet (½’’)

3/8" 1/2" 92

290

MFL03 Extra Master Float Valve Features • Vertical Float Valve with Brass Water Inlet (⅜ “)

3/8"

100

CATALOGUE

212

114

MFL04 New ERA Float Valve

3/8" 1/2"

Features 237

• Horizontal New Era Float Valve with Plastic Inlet (⅜” or ½”)

114

237

3/8" 1/2"

MFL05 New ERA Float Valve Features • Horizontal New Era Float Valve With Brass Inlet (⅜”)

RZV01 In Wall Concealed Mechanism Features • 3/6 lt, 9cm Width, Silent and Quick Refill Easy Installation

CATALOGUE

213

PLASTIC PRODUCTS RZV02 In Wall Concealed Mechanism Features • 3/6 lt, 9cm Width, Silent and Quick Refill Easy Installation

RZV03 In Wall Concealed Mechanism Features • 3/6 lt, Metal Frame, Silent and Quick Refill Easy Installation

243

BTN01 Round Grey Button 220

Features

CATALOGUE

214

128

165

• Round Grey Button

243

BTN02 Round Chrome Button 220

Features

165

128

• Round Chrome Button

6

24 0

22

BTN03 Square Grey Button Features 165

128

• Square Grey Button

6

24 22 0

BTN04 Square Chrome Button

128

165

Features • Square Chrome Button

CATALOGUE

215

PLASTIC PRODUCTS 64

SFN02 Flexible Siphon Features • 1 ½ - Ø32, 304 Stainless Steel Quality Screw and 64mm Drain

L800

32

64

SFN03 Mini Bottle Siphon Features • Mini Bottle, 304 Stainless Steel Quality Screw and 64mm Drain Ø32 Outlet

30

160-210

94

SFN04 Mini Bottle Siphon Features

64

CATALOGUE

216

730

32

160-210

• Mini Bottle, 304 Stainless Steel Quality Screw and 64mm Drain, Flexible Outlet Ø32/40/50

70

SFN05 S-Siphon

260-340

Features

40

• S Siphon, Machine Connection, 304 Stainless Steel Screw and 70mm Drain, Outlet Ø40

SFN06 S-Siphon 70

Features • S Siphon, Machine Connection, 304 Stainless Steel Screw and 70mm Drain, Flexible Outlet Ø32

32

260-340

730

70

L 320

SFN07 S-Siphon Features

40

300-370

• S Siphon, Overflow, Machine Connection, 304 Stainless Steel Screw and 70mm Drain, Outlet Ø40

CATALOGUE

217

PLASTIC PRODUCTS L 320

70

220-310

SFN08 S-Siphon Features

40

340-420

• S Siphon, 304 Stainless Steel Screw and 70mm Drain, Overflow, Machine Connection Enables Extra Storage, Outlet Ø40

SFN09 S-Siphon

250-400 114

L 320

Features

40

310-370

• Suit for double or 1,5 compartment overflow sinks, S Siphon, 304 stainless steel garbage sink , Outlet Ø40, machine connection

114

SFN10 3 ½ Flexible Siphon For Sinks

L 730

Features • 3 ½ Drain Flexible Siphon, outlet Ø32/40/50

40 CATALOGUE

218

64

SFN11 Flexible Siphon

L750 Features • 1 ½ - Ø32, 304 Stainless Steel Quality Screw and 64mm Drain, Machine Outlet

32

64

L750

SFN12 Flexible Siphon Features • 1 ½ - Ø40/50, 304 Stainless Steel Quality Screw and 64mm Drain

50

50

SFN13 Siphon For Urinals

L700

Features • Flexible Siphon For Urinals Ø32

32

CATALOGUE

219

PLASTIC PRODUCTS 64

SFN14 Flexible Siphon

L700

Features • 1 ¼ - Ø32, 304 Stainless Steel Quality Screw and 64mm Drain.

32

80

SFN15 Flexible Siphon

L750

Features • 1 ½ - Ø40, 304 Stainless Steel Quality Screw and 80mm Drain.

40

SFN16 Midi Bottle Siphon Features 70

• Midi Bottle, 304 Stainless Steel Quality Screw and 70mm Drain, Flexible Outlet Ø32/40/50

50

240-340

780

CATALOGUE

220

SFN17 3 ½ Bottle Siphon For Sinks Features • Midi Bottle, 304 Stainless Steel Quality Screw and 70mm Drain, Flexible Outlet Ø32/40/50

114

L 320

280-210

800

80

340

340

80

SFN18 Double Flexible Siphon

90

Features

300

40

• Double 1 ½ - Ø40, 304 Stainless Steel Quality Screw and 80mm Drain

70

SFN19 Long Flexible Siphon L1500

Features • 1 ½ - Ø32, 304 Stainless Steel Quality Screw and 70mm Drain [Min. 570mm, Max. 1500]

32

CATALOGUE

221

PLASTIC PRODUCTS 70

SFN20 Long Flexible Siphon L1450

Features

• 1 ½ - Ø40/50, 304 Stainless Steel Quality Screw and 70mm Drain [Min. 670mm, Max. 1600]

50

TRB01 Shower Siphon Features • Shower Siphon - V - Model, • Height : 90mm, Flexible Outlet Ø32/40/50

70

70

32

730

TRB02 Bathtub Siphon Features

L 600

L 550

• Bathtub Siphon - V - Model With Flexible Outlet Ø32/40/50

70

32

730

CATALOGUE

222

TRB03 Shower Siphon 37

• with elbow, easy to connect • For flat shower stalls fast water draining • Suitable for ø40 / ø50 outlet • Self sealing body

64

58,50

44,50

54

Features

70

34

700

YSZ01 Plastic Floor Drain Features • Plastic 10X10 cm Horizontal Ø32 Outlet

YSZ02 Plastic Floor Drain Features • Plastic 10X10 cm Horizontal Ø50 Outlet

CATALOGUE

223

PLASTIC PRODUCTS YSZ03 Plastic Floor Drain Features • Plastic 10X10 cm Vertical Ø50 Outlet

YSZ10 Plastic Floor Drain

150

150

Features

55

32

50

1

• Plastic 15x15 cm Horizontal Ø32 Outlet

YSZ11 Plastic Floor Drain

150

Features

65

50

CATALOGUE

224

• Plastic 15x15 cm Horizontal Ø50 Outlet

50

150

YSZ12 Plastic Floor Drain

1

Features

48

• Plastic 15x15 cm Vertical Ø50 Outlet

50

YSZ04 Stainless Steel Floor Drain Features • Stainless Steel 10X10 cm Horizontal Ø32 Outlet

YSZ05 Stainless Steel Floor Drain Features • Stainless Steel 10X10 cm Horizontal Ø50 Outlet

CATALOGUE

225

PLASTIC PRODUCTS YSZ06 Stainless Steel Floor Drain Features • Stainless Steel 10X10 cm Vertical Ø50 Outlet

YSZ07 Complete Stainless Steel Floor Drain

10

0

10

0

65

Features Ø32

0

65

10

CATALOGUE

226

• Complete Stainless Steel Floor Drain 10x10 Horizontal Ø32 outlet

10

0

YSZ08 Complete Stainless Steel Floor Drain 50

Features • Complete Stainless Steel Floor Drain 10x10 Horizontal Ø50 outlet

10

0

10

0

YSZ09 Complete Stainless Steel Floor Drain Features

94

• Complete Stainless Steel Floor Drain 10x10 Vertical Ø50 outlet

50

110 100

KDA01 Spare Parts and Accessories Features • Gasket For Ceramic Reservoir

134

20

min:235 max:395

KDA02 Spare Parts and Accessories Features • W.C. Extendable Elbow Pan Connector

106 85

CATALOGUE

227

PLASTIC PRODUCTS 85

min: 270 max: 530

105

KDA03 Spare Parts and Accessories Features • W.C. Extendable Pan Connector

134

KZK01 ADRIO Toilet Seat Features • Adrio Toilet Seat • Plastic 700 gr

KZK02 SOLUS Toilet Seat Features • Solus Toilet Seat • Plastic 1390 gr

CATALOGUE

228

49.50

GALA KAPAK

KZK03 GALA Toilet Seat max455 min435

Features 450

37

353

• Gala Toilet Seat • Plastic 1700 gr

min424 max437

KZK04 AKDENİZ Duroplast Toilet Seat

436

Features

37

366

• Akdeniz Duroplast Toilet Seat

min415 max428

KZK05 KELEBEK Duroplast Toilet Seat 430

Features

360

• Kelebek Duroplast Toilet Seat

CATALOGUE

229

PLASTIC PRODUCTS 49.50

GALA KAPAK

max455 min435

KZK06 GALA Duroplast Toilet Seat

450

Features

353

• Gala Duroplast Toilet Seat

450

KZK07 ATROS Toilet Seat Features

365

• Soft Close Toilet Seat • Plastic 1450 gr

50

480

max455 min440

65

max177 min137

426

KZK08 Soft Toilet Seat

392

Features

360

• Soft Toilet Seat

CATALOGUE

230

65 426

KZK09-01

KZK09-02

KZK09 Soft Toilet Seat With Print

392

Features

360

• Soft Toilet Seat With Print

KZK09-04

Shower Drain Product Code & Name 20X7 cm side outlet Ø50

DKN02

30X7 cm side outlet Ø50

DKN03

40X7 cm side outlet Ø50

DKN04

50X7 cm side outlet Ø50

DKN05

60X7 cm side outlet Ø50

DKN06

80X7 cm side outlet Ø50

DKN07

100X7 cm side outlet Ø50

10

min 60 max 100

15

DKN01

40

880

70

29

4

800

130

KZK09-03

17,4 30

25,6

Technical draw of DKN06

CATALOGUE

231

0 212 879 00 30 Pbx

CATALOGUE

232

www.facebook.com/arbeka www.arbeka.com.tr

CATALOGUE

233

TALIA Product Code & Name BB10 Ø70

Talia Bathroom Armature G 1/ 2"

Surface Chrome

150

Features

140- 160

G 1/ 2"

• Special aerator (Bubble flow, with lime breaker) • Lenght of outlet is 150 mm • Armature connection threads are ¾” • Eccentric connection threads are ¾”-½” • Spiral hose connection threads are ½ • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused by the contaminants

inside the fittings a filter at the entrance of the flat is recommended.

Product Code & Name LB10

75

Talia Wash Basin Armature

Surface Chrome Features

• Special aerator (Bubble flow, with lime breaker) • Lenght of outlet is 115 mm • Height of outlet is 75 mm • Measurements of hot&cold water flex hose connections are M10X1-⅜” (or ½”) 40 cm • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused by the contaminants

115

inside the fittings a filtered interval tap is recommended.

Product Code & Name LT10 Talia Wash Basin Armature (Single Entrance)

75

Surface Chrome Features

110

• Special cartridge for single entry , Special aerator (Bubble flow, with lime breaker) • Lenght of outlet is 110 mm , Height of outlet is 75 mm • Measurements of cold water flex hose connections are M10X1-⅜” (or ½”) 40 cm , • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings a filtered interval tap is recommended.

CATALOGUE

234

Energy Saving

Water Saving

Product Code & Name TL10 Talia Monoblock Wash Basin Armature

190

Surface Chrome Features

• Special aerator (Bubble flow, with lime breaker) • With swivel spout • Lenght of outlet is 115 mm • Height of outlet is 190 mm • Measurements of hot&cold water flex hose connections are M10X1-⅜” (or ½”) 40 cm • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused by the contaminants

115

inside the fittings a filtered interval tap is recommended.

Product Code & Name TT10 190

Talia Monoblock Wash Basin Armature (Single Entrance)

Surface Chrome Features

• Special cartridge for single entry • Special aerator (Bubble flow, with lime breaker) • Lenght of outlet is 115 mm • Height of outlet is 190 mm • Measurements of cold water flex hose connections are M10X1-⅜” (or ½”) 40 cm • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused by the contaminants

115

inside the fittings a filtered interval tap is recommended.

Product Code & Name TE10

215

Talia Monoblock Sink Armature

Surface Chrome Features

170

• Special aerator (Bubble flow, with lime breaker) • With swivel spout • Lenght of outlet is 170 mm • Height of outlet is 215 mm • Measurements of hot&cold water flex hose connections are M10X1-⅜” (or ½”) 40 cm • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings a filtered interval tap is recommended.

CATALOGUE

235

NERIDA & DARIA Product Code & Name Ø70

BB20 Nerida Bathroom Armature

G 1/ 2" 161

Surface Chrome Features

140- 160

G 1/ 2"

• Special aerator (Bubble flow, with lime breaker) • Lenght of outlet is 161 mm • Armature connection threads are ¾” • Eccentric connection threads are ¾”-½” • Spiral hose connection threads are ½ • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused by the contaminants

inside the fittings a filter at the entrance of the flat is recommended.

Product Code & Name LB20 Nerida Wash Basin Armature 75

Surface Chrome Features

• Special aerator (Bubble flow, with lime breaker) • Lenght of outlet is 120 mm • Height of outlet is 75 mm • Measurements of hot&cold water flex hose connections are M10X1⅜” (or ½”) 40 cm • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused by the contaminants

120

inside the fittings a filtered interval tap is recommended.

Product Code & Name TL20 Nerida Monoblock Wash Basin Armature 195

Surface Chrome Features

• Special aerator (Bubble flow, with lime breaker) • With swivel spout • Lenght of outlet is 115 mm • Height of outlet is 195 mm • Measurements of hot&cold water flex hose connections are M10X1-⅜” (or ½”) 40 cm • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused by the contaminants

115

inside the fittings a filtered interval tap is recommended.

Product Code & Name TE20 220

Nerida Monoblock Sink Armature

170

Surface Chrome Features

• Special aerator (Bubble flow, with lime breaker) • With swivel spout • Lenght of outlet is 170 mm • Height of outlet is 220 mm • Measurements of hot&cold water flex hose connections are M10X1-⅜” (or ½”) 40 cm • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings a filtered interval tap is recommended.

CATALOGUE

236

Energy Saving

Water Saving

G 3/ 4" Ø70

Product Code & Name BN01 Daria Bathroom Armature

130

Surface Chrome Features

140- 160 G 1/ 2"

• Special aerator (Bubble flow, with lime breaker) • Classic stemmer • Lenght of outlet is 130 mm • Armature connection threads are ¾” • Eccentric connection threads are ¾”-½” • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused by the contaminants

inside the fittings a filter at the entrance of the flat is recommended.

Product Code & Name TK01 110

Daria Monoblock Eagle Wash Basin Armature 105

Surface Chrome Features

• Special aerator (Bubble flow, with lime breaker) • Classic stemmer • Lenght of outlet is 105 mm • Height of outlet is 110 mm • Measurements of hot&cold water flex hose connections are M10X1-⅜” (or ½”) 40 cm • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings a filtered interval tap is recommended.

Product Code & Name KL01 Daria Monoblock Swan Wash Basin Armature

Surface Chrome 150

120

Features

• Special aerator (Bubble flow, with lime breaker) • Classic stemmer • With swivel spout • Lenght of outlet is 120 mm • Height of outlet is 150 mm • Measurements of hot&cold water flex hose connections are M10X1-⅜” (or ½”) 40 cm • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings a filtered interval tap is recommended.

Product Code & Name DL01 Daria Wash Basin Armature with Swivel Spout

Surface Chrome Ø70

Features

G 1/ 2"

140- 160

180

• Special aerator (Bubble flow, with lime breaker) • Classic stemmer • With swivel spout • Lenght of outlet is 180 mm • Armature connection threads are ¾” • Eccentric connection threads are ¾”-½” • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused by the contaminants

inside the fittings a filter at the entrance of the flat is recommended.

CATALOGUE

237

DARIA KE01 Daria Monoblock Swan Sink Armature

Surface Chrome 195

140

Features

• Special aerator (Bubble flow, with lime breaker) • Classic stemmer • With swivel spout • Lenght of outlet is 140 mm • Height of outlet is 195 mm • Measurements of hot&cold water flex hose connections are M10X1-⅜” (or ½”) 40 cm • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings a filtered interval tap is recommended.

Product Code & Name DE01 Ø70

Daria Sink Armature with Swivel Spout

Surface Chrome

230

• Special aerator (Bubble flow, with lime breaker) • Classic stemmer • With swivel spout • Lenght of outlet is 230 mm • Armature connection threads are ¾” • Eccentric connection threads are ¾”-½” • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused by the contaminants

G 1/ 2"

140- 160

Features

inside the fittings a filter at the entrance of the flat is recommended.

Ø70

Product Code & Name SE01 Daria Permanent Sink / Wah Basin Armature

Surface Chrome

165

• Special aerator (Bubble flow, with lime breaker) • Classic stemmer • Lenght of outlet is 165 mm • Armature connection threads are ¾” • Eccentric connection threads are ¾”-½” • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused by the contaminants

G 1/ 2"

140- 160

Features

inside the fittings a filter at the entrance of the flat is recommended.

Product Code & Name LM01 Daria Swivel Wash Basin Tap 165

120

Surface Chrome Features

• Special aerator (Bubble flow, with lime breaker) • Classic stemmer • With swivel spout • Lenght of outlet is 120 mm • Height of outlet is 165 mm • Measurements of single inlet flex hose connections are ½”-⅜” 40 cm • To prevent any damage which can be caused by the contaminants inside the fittings a filtered interval tap is recommended.

CATALOGUE

238

Energy Saving

Water Saving

Product Code & Name DM01 Daria Swivel Sink Tap

210

Surface Chrome 140

Features

• Special aerator (Bubble flow, with lime breaker) • Classic stemmer • With swivel spout • Lenght of outlet is 140 mm • Height of outlet is 210 mm • Measurements of single inlet flex hose connections are ½”-⅜” 40 cm • To prevent any damage which can be caused by the contaminants inside the fittings a filtered interval tap is recommended.

Product Code & Name EM01 Daria Applique Sink Tap

Surface Chrome Features

Ø60

• Special aerator (Bubble flow, with lime breaker) • Classic stemmer • With swivel spout • Lenght of outlet is 230 mm • Rosette diameter is 60 mm, tap wall connection is dimension ½” • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused by the contaminants inside the fittings a filter at the entrance of the flat is recommended.

G 1/ 2"

230

Product Code & Name UM01 Daria Long Tap

G1/2"

Ø60

Surface Chrome Features

123

• Classic stemmer • Lenght of outlet is 123 mm • Rosette diameter is 60 mm, tap wall connection is dimension ½” • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused by the contaminants

inside the fittings a filter at the entrance of the flat is recommended.

CATALOGUE

239

DARIA & SHOWER SYSTEMS Product Code & Name KM01 Daria Short Tap

Surface Chrome

• Classic stemmer • Lenght of outlet is 87 mm • Rosette diameter is 60 mm, tap wall connection is dimension ½” • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused by the contaminants

G1/2"

Ø60

Features

inside the fittings a filter at the entrance of the flat is recommended.

87

Product Code & Name CM01 G 1/ 2"

Daria Laundry Tap

Surface Chrome

Ø60

Features

• Classic stemmer • Lenght of outlet is 60 mm • Rosette diameter is 60 mm, tap wall connection is dimension ½” • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused by the contaminants

60

inside the fittings a filter at the entrance of the flat is recommended.

Product Code & Name CM01-2 G 1/ 2"

Daria Laundry Tap (without Union)

Surface Chrome

Ø60

Features G 3/ 4" 60

CATALOGUE

240

• Classic stemmer • Lenght of outlet is 60 mm • Rosette diameter is 60 mm, tap wall connection is dimension ½” • Ideal working pressure is 3-4 bar • To prevent any damage which can be caused by the contaminants

inside the fittings a filter at the entrance of the flat is recommended.

Energy Saving

Water Saving

Ø70

Product Code & Name DS15 Daria Suspended Shower Set

Surface Chrome Features (G 1/ 2" - G 1/ 2")

• Single Function • With lime breaker • Massage Effect • 150 cm spiral hose (½”-½”) • with ½”-¾” adaptor

Ø80

Product Code & Name DS16 61 cm

G 1/ 2"- G 1/ 2"

53 cm

Daria Sliding Shower Set

Surface Chrome Features

• 3 Functions • With lime breaker • Massage Effect • Sliding ( Bolt lenght 53 cm-full body 61 cm) 150 cm spiral hose (½”-½”) • with ½”-¾” adaptor

CATALOGUE

241

SUPPLEMANTARY PRODUCTS Daria Ball Laundry Tap

Surface Chrome

G 1/2"

• Ball type turning on/off • Rosette diameter is 55 mm, suitable size for ¾” connection • tap wall connection size is ½”

CM02

Ø55

Features

Product Code & Name

G 3/4" 30

Product Code & Name

Product Code & Name

Product Code & Name

BRG80

BRG79

BRG77

Swan Type Basin Group (KL01)

Swan Type Sink Pipe Group (KE01)

Swivel Type Sink Pipe Group (DE01)

Product Code & Name

Product Code & Name

Product Code & Name

DSB019

DSB020

ASK012

Hand Shower 1f (DS15)

Hand Shower 3f (DS16)

Shower hanger (DS15)

Product Code & Name

Product Code & Name

ASK013

KAR022

Shower hanger for sliding bar (DS16)

ceramic cartridge footless (Ø35) / (Ø40)

Product Code & Name KLG81 Nerida handle group

with colour spot (Ø40)

Product Code & Name PGR29 Aerator group M24X1

Product Code & Name SLG01 Manuel stemmer group

CATALOGUE

242

KAR024

Product Code & Name HRG01

Product Code & Name KLG61 Talia handle group with colour spot (Ø35)

Product Code & Name HOR064 Spiral hose 150 cm

flex hose group –short end (M10X1 - ⅜” 40 cm)

Product Code & Name

Product Code & Name

VLT15

VLG21 VLG22

VLT16

Red Blue Daria flywheel

Red Blue Daria flywheel group

TERMS OF WARRANTY Warranty period starts from the delivery date and it is as mentioned below The product is under the scope of our company’s guarantee inclusive of all parts of the product.

When the product breaks down during the warranty period, the time spent for the repairing of the product is added to the warranty period.

The repairing of the product is 20 days maksimum. This period starts when the malfunction of the product is informed to the service station, in case there is not any service station available, then it starts from the notification date to either one of the selling agent, dealer, agency, representative, importer or to the manufacturer – producer of the product. The consumer can make breakdown reporting; by telephone, fax, e-mail, registered and reply paid letter or quasi ways. In case of any dispute, obligation of prof belongs to the consumer.

In case the malfunction of the product could not be repaired within 10 days, then the manufacturer-producer or the importer of the product is obliged to provide another product with similar features to the consumer until the faulty product is repaired.

When the product breaks down due to material and labour or due to assembly faults within the guarantee period, the product will be repaired without applying any charge for labour costs, costs of the part changed or for any reason.

Although the consumer uses repair rights, if the product break down twice in one year due to the same fault or different malfunction takes place more than four times within a year, with the condition that these take place within the guarantee period from the date the product is delivered to the consumer or total of different break downs exceeds six times within the guarantee period and provided that the non use of the product becomes continuous and the maximum time limit for repairs is exceeded, then the following can be requested; customer can request for exchange of the product free of charge, request for refund of the amount, reduction in the amount in relation to the failure when it is determined that the malfunction can not be repaired with a report that is prepared by the service station related to the product, in case there is not any service station available, by either one of the selling agent, dealer, agency, representative, importer or to the manufacturer – producer of the product.

Malfunctions taking place due to the use that is other than the ones stated in the operating manual of the product will not be covered under the scope of the warranty.

When there is any conflict with regards to the guarantee certificate, application can be made to the Protection of the Consumer and Competition General Directory.

WARRANTY PERIOD Faucet and manually operated (with Cartridge / Gasket): 5 (Five) years Electronically operated (Photocell) armatures: Body and Chrom casing: 5 (Five) years, Functional pieces: 2 (Two) years Thermostat operated (Thermostatic) Armatures: 5 (Five) years.

Valves: 5 (Five) years Shower Systems: 5 (Five) years GPD Antik: 2 (Two) years Plastic products 5 (Five) years PVD and Copper Plated products 2 (Two) years

CONDITIONS OUTSIDE OF THE SCOPE OF THE WARRANTY Faults occured due to wrong installation and usage contrary to the user’s manuel.

Faults taking place due to wrong installation available or due to faulty mounting of the product by the consumer other than the authorised service.

Possible problems occurring on the installations that do not have pressure regulation (installations, where water pressure regulation or water pressurisation units are not used) (Ideal operation pressure: between 3-4) Possible problems occurring due to sand, sludge, canvas, construction residues because of the non use of intermediate tap with filter and filter.

Possible problems occurring due to dropping or being impacted during handling, loading, unloading and mounting.

Possible problems occurring on the surface of the products that wait for long times at the construction sites.

Break downs occurring due to misuse or hard use.

Problems related to scaling Deformations taking place due to use of acids or cleaning materials that contain abrasive substances.

Break downs occurring due to use of parts that are not original spare parts.

Parts, casings, cartridges that crack due to freezing.

Absence of approved warrenty certificate or invoice.

Misuse the products.

TS EN 1213 TS 579 TS EN 1567 TS 2218

YE

A

R

STOP/BLOW-OFF VALVES RADIATOR VALVE AND UNIONS WATER PRESSURE REGOLATOR A TYPE UNIONS WITHOUT VENT HALL

TS EN 12288 GATE VALVES TS EN 13828 BALL VALVES TS EN 331 COMBUSTIBLE GAS BALL VALVE TS EN 1254 PIPE CONNECTION UNITS TSEK - 8575 ¾’’-1’’ MAIN TAP TSEK - 8689 PIPE CONNECTION UNITS TS CEN 13547 INDUSTRIAL BALL VALVES TSEK-9488 SUBSCRIBER CONNECTION VALVES

TY

TS 3143 EXTENSIONS TS EN 200 TAPS, DOUBLE CONTROL ARMATURES TS EN 817 SINGLE CONTROL ARMATURES (MIX) TS EN 1111 THERMOSTATIC ARMATURES TS EN15091 PHOTOCELL ARMATURES

N

TSE Conformity Certificates

A S W ARR

CATALOGUE

243

www.gpdexport.com export@gpd.com.tr Phone: +90212 879 0030 (pbx) Fax: +90212 879 0035 facebook.com/gpdaimasizlerle twitter.com/gpdaimasizlerle