Scheme of display readings

Scheme of display readings Display readings without footnote are shown when the setting „standard“ is chosen (factory setting).

* optional - if the required option card is not available, the message „N.A.“ (nicht angeschlossen = not connected) is displayed.

module voltage (maximum) (V)

operating hours of FRONIUS IG unit (HH:MM)

Mode „Now“ output supplied (W) voltage (V) electricity supplied (A) mains frequency (Hz) * mains impedance (Ohm) module voltage (V) module power (A) * module temperature (°C;alternatively also °F)

insulation resistance (MOhm) * output reading of consumption meter (W) * ambient temperature (°C; alternnatively also in °F) * insolation (W/m²) * time (HH:MM) Mode „Day“ / „Year“ / „Total“ energy supplied (kWh / MWh)

yield

(set applicable currency) CO2-reduction (kg / t) power output supplied (maxim.) (W) mains voltage (maximum) (V) mains voltage (minimum) (V)

* energy as read by consumption meter (kWh / MWh) * module temperature (maximum) (°C; alternat. also °F) * module temperature (minimum) (°C; alternat. also °F)

* ambient temperature(maximum) (°C; alternat. also °F) * ambient temperature( minimum) (°C; alternat. also °F) * insolation (maximum) (W/m²)