PROFESSIONAL CHOKE AND BARREL GAUGE The world standard precision instrument used by gun manufacturers and barrel makers to measure bore diameter, choke constriction, and choke length. This gauge is a must if you expect to be able to determine if chokes and/or barrel bores have been altered. Dial indicator measures in .001” increments. Measurements are detected by expansion and contraction of three metal ‘fingers’ under the control of the person taking the measurements. All test and set bushings and instructions included. Comes with a handsome wood case. Gauge length 22 3/4”, weight 1 1/4 pounds. 10, 12, 16, 20 AND 28 GAUGE
T0170
$450.00
.410 BORE ONLY
T0171
$450.00
SHOTGUN DROP GAUGE Used by stock fitters, stock makers, and gun dealers to measure the exact drop at heel and toe as well as the amount of cast. Fits over the full length of the rib and the stock and reads direct. Aluminum construction. Length 4 feet, width 5 3/4”. T0370
$360.00
SHOTGUN WALL THICKNESS GAUGE
DIGITAL TRIGGER PULL GAUGE The new Lyman Trigger Pull Gauge is designed to be the fastest and most accurate Trigger Pull Gauge available on the market. Unlike other gauges, there are no weights or sliding pointers to contend with. This instrument will accurately record the results, as you can take multiple readings and then take the average weight for the string at the touch of a button. T0130
Used by proof houses, gunsmiths, and gun dealers to accurately measure barrel wall thickness. Exact direct read-out provides information you can use to determine if the shotgun barrels are safe. Also used to determine if barrel walls are sufficiently thick for choke tubes. Dial indicator measures in .001” increments. Measurement range: 12, 16, 20, 28 gauges. Blued base with brass fittings, rigid steel construction. T0350
$550.00
$50.00
GALAZAN |
VISIT US ONLINE AT www.connecticutshotgun.com
49