Page 1


Andalusia Takes Off

A look at the Andalusian Aeronautic Industry Fundación Hélice Parque Tecnológico y Aerospacial de Andalucía c/ Wilbur y Orville Wright 17-19-21 41309 La Rinconada (Seville) T (+34) 954 17 90 02 F (+34) 954 17 23 71 fundacion-helice.net 1st EDITION: May 2009 © Fundación Hélice A Project of ® LaCamaraDeMusicas lacamarademusicas.com for Fundación Hélice

presents

PHOTOGRAPHY © Oscar Romero V. © Lolo Vasco © José Antonio de Lamadrid MUSIC © Raúl Rodríguez MULTIMEDIA © Oscar Romero V. & Raúl Rodríguez LAYOUT & DESIGN © Estudio Pedro Cabañas pedrocabanas.net

Andalusia Takes Off A look at the Andalusian Aeronautic Industry

TEXT © Fundación Hélice TRANSLATION © Concha Ortiz This project is protected by copyright in whole and in part. Its reproduction or communication in any form or by any means without prior permission from the right holders is illegal and punishable. This applies to all acts of use, in particular such as the reproduction of pictures, music, multimedia and designs; their performances and demonstration, the reproduction, broadcasting, storage and processing in electronic media. Infringements will be prosecuted. PRINT Imprenta Escandón S.A. Dep. Legal SE-3030-2009

in colaboration with


Fundación Hélice, as an initiative of the Andalusian Regional Government, was created to materialize the Aerospace sector promotion and to articulate the means to strength the Andalusian Aerospace Cluster. Joining efforts together with social and private stakeholders involved in the Aerospace business, the Foundation holds the cluster representation and participates on behalf of it. Therefore one of the goals of Fundación Hélice is to foster the development of the aeronautical industry in Andalusia by presenting its technology and capabilities on both the Spanish and International markets. To that end, over the last few years Fundación Hélice has published a statistical study of this industry and the Foundation’s annual report, both on a yearly basis, as well as a quarterly journal entitled “Aeronáutica Andaluza”. Although these publications are of unquestionable value for increasing familiarity with the sector, the Foundation has decided to publish another document of reference describing the technologies, projects and capabilities of the main companies operating in Andalusia. We are referring to the first edition of this CATALOGUE, which is intended to supplement and summarise our other publications.

Prologue

The timing of this CATALOGUE is also significant for a number of reasons. First of all, we will soon be seeing a new edition of the Paris Air Show in Le Bourget, the most important exhibition of its kind, where we will be showing an audiovisual presentation of the key components of our industry. The CATALOGUE will be an ideal supplement and reminder of that presentation. Secondly, in Andalusia we are involved in different stages of three major aeronautical programmes (A380, A400M, A350) that will certainly represent a turning point for this field. Some significant examples are the creation of Alestis, the first Tier 1 supplier in Andalusia, and the CATEC technology centre, which was promoted by the Agency of Innovation and Development of Andalusia IDEA and the main aeronautical corporations. And finally the financial downturn has let its impact so far only in terms of the reduced availability of the working capital so badly needed for the Aerospace activity. And that is all. We hope that this CATALOGUE fulfils its purpose and thank all the companies involved for their collaboration and patience while we collected the data and created the audiovisual presentation. Our gratitude also goes to the organisations that have funded this CATALOGUE and the audiovisual presentation: Agencia IDEA, EXTENDA and CATEC. Manuel Cruz Director Fundación Hélice


Index Alestis (Tier1) Technological Infrastructures

11 13

TADA

Electrical & Electronic Systems

57 59

Aer贸polis

15

EIIT

61

Fada Catec

17

Elimco

63

Assembly

19

Navair

65

Aernnova

21

AES

23

EASY

69

Aerosur

25

Sacesa

71

SK10

27

Sofitec

73

SK3000

29

Tooling & Mechanical Activities

Composite & Plastic Materials

Engineering & Consulting

67

75

31

Aertec

77

Aercal

33

Ghenova

79

Airgrup

35

MDU

81

Consur

37

MP

83

Galvatec

39

Inespasa

41

TEAMS

87

Intecair

43

Services

89

M&M

45

A&G

91

Mecaprec

47

Meupe

49

Clients of Reference

93

Servimec

51

Andalusian Global Statistics

95

Sevilla Control

53

STSA

55

Analysis & Testing

Diagrams & Tables

Complete Sector List & Activities

Acknowledgements

85

92

97 101


ALESTIS comprises the existing SK10 Companies plus Sacesa, and it is organised focused on different technologies:

Alestis Aerospace is a new group formed in January 2009 to become an aerospace TIER1 company constituted by the nine productive companies from Alcor Group plus the incorporation of Sacesa. Shareholders are in equity participation with a Financial (Andalusia financial entities), institutional (Agency of Innovation and Development of Andalusia IDEA) and industrial representation (Alcor Group. Sacesa & Ficosa). Alestis Aerospace, leader in the carbon fiber and composites technologies, takes full responsibility for the design, development, certification, manufacturing and support of complex carbon fiber aerostructures. Advance automatic processes as Automated Tape Lay-up (ATL), Fiber Placement (FP), Out of Autoclave (Resin Transfer Molding RTM), guarantee our commitment with innovation and technology.

· Composite: ALESTIS-SACESA (Sevilla), IDEC for RTM (Vitoria) and SK10-Composite for ATL (Cádiz). · Sheet metal parts and surface treatments: SK2024. · Assembly: SK Epsilon (Álava), SK380, SK10 Andalucia (Cádiz), SK3000 (Sevilla) and SK10 do Brasil (Brasil). · Engineering & Services: SK DyT (Álava) and SK10 Engineering.

Strategic Actions Taken Creation of SK10 Ingeniería (CTIDIA). Creation of SK10 Composites for Automatic Carbonfiber Technologies. Taking on SACESA (hand lay-up autoclave composites). 11 11 Andalusia Takes Off - Alestis Andalusia Takes Off - Alestis

ALESTIS Industrial Capabilities


15

José Luis Zabala Sánchez Technical Director T (+34) 955 62 44 32 F (+34) 955 62 44 26 jlzabala@aeropolis.es

Products and Services Business Centre. Aerospace Technologies Advance Centre (CATEC). Office buildings. Business development support infrastructures (business pre-nurseries and nurseries). Aeronautic suppliers village. Hotel and service centre. Training centre. Web gateway. Sports facilities. Garden areas. 24-hour surveillance. Industrial and tertiary sites. Industrial units for hire-sale.

Andalusia Takes Off - Technological Infrastructures

AERÓPOLIS Parque Tecnológico y Aeronáutico de Andalucía Centro de Empresas Aerópolis c/ Ingeniero Rafael Rubio Elola 1, 1ª Planta 41309 La Rinconada (Seville) www.aeropolis.es

Aerópolis The Aerospace Technology Park of Andalusia, Aerópolis, is an initiative of the Regional Government to foster the aerospace sector in the region by providing a single area for its entire industries with the ability to provide advanced services. Strategically located by Seville airport and the Airbus Military FAL which is developing the assembly project for the A400M military transport aircraft, Aerópolis primarily aims to provide financial and technological support for small and medium-sized Andalusian aeronautical companies in order to increase their competitiveness so that they can undertake major projects in the community.


Fada Catec

17

CATEC participates, individually or in cooperation with firms and/or organizations from Andalucía, in the development of activities related to: Applied research. Technological development. Technological prospective and intelligence. New technologies management. (protection and industrialisation) CATEC facilities consists on: 3000 m2 laboratories and workshops, plus 1500 m2 offices and meeting rooms, located in the Aeropolis Aerospace Technological Park, in Seville (Spain). The center, managed by Andalusian Aerospace Development Foundation –FADAhas a steering committee with representants of –INTA- National Aerospace Technology Institute, University of Seville, Andalusian Innovation Agency (regional government) and several private firms. It aims to satisfy the R&D requirements of firms in the aerospace industry by the development of technologies and/or transfer of know-how.

AndalusiaTakes TakesOffOff- Tooling - Technological Infrastructures Andalusia & Mechanical Activities

“Center for Advanced Aerospace Technologies”, CATEC, is a first class tool for generation and management of Aerospace Science and Technology, in coordination with the Academy and Industry. FADA-CATEC Fundación Andaluza para el Desarrollo Aeroespacial Parque Tecnológico y Aeronáutico de Andalucía - Aerópolis c/ Wilbur y Orville Wright 17-19-21 41309 La Rinconada (Seville) www.catec.aero Juan P. Vela General Director T (+34) 954 17 90 02 F (+34) 954 17 23 71 info@catec.aero

Products and Services The center in divided into five technological areas: Materials and processes. Automation and robotics. Avionics and systems. Simulation and software. Unmanned Air Vehicules platforms. -UAV-. CATEC also provides knowledge management support in these technological areas, developing, coordinating and/or managing R&D projects, fostering the transfer of technologies and providing technical vigilance and prospective in the aerospace sector.

A shuttle to knowledge


Andalusia Takes Off - Tooling & Mechanical Activities

19


Total quality & cost efficiency assurance

Aernnova Aernnova is a global aerostructure company providing the integral management of large aircraft sections. At the same time, Aernnova also provides engineering services, composite and metal parts, as well as repair and product support services.

Andalusia Takes Off - Assembly

21

The primary goal of Aernnova Andalucía is to ensure customer satisfaction by compliance with deadlines and a guarantee of cost-efficiency.

AERNNOVA Andalucía Parque Tecnológico y Aeronáutico de Andalucía - Aerópolis c/ Charles Lindberg 7 41309 La Rinconada (Seville) Francisco Cortés Llorca General Manager T (+34) 954 11 50 50 francisco.cortes@aernnova.com

Products and Services Its primary fields of activity are structural assemblies (metal, kevlar, fibre glass and carbon), providing integral programme management.

Key Products CRJ700/900/1000 VERTICAL STABILIZER: assembly of the structure, including bullet fairing equipped with flight controls, hydraulic and electric systems. CRJ700/900/1000 HORIZONTAL STABILIZER: assembly of complete structure, including elevators and fully equipped with flight controls, hydraulic and electric systems. Functional elevator testing. Airbus A330-340 L/H Section 13.


AEROESTRUCTURAS SEVILLA, S.L. c/ Las Moriscas 3-9 41700 Dos Hermanas (Seville) Jose Luis Casanova Mascarell General Manager T (+34) 619 10 23 82 / 954 93 18 08 F (+34) 954 93 10 70 joseluis.casanova@gruposc-aes.com

Products and Services Integral aeronautical assembly management including supply purchasing, management and sheet metal / machined detail parts manufacturing. Final and special process treatments (detail parts & assemblies).

Complete aerostructure assembly

Customer support in FAL (System assembly, Integral restructuring & Technical support).

Key Products Eurofighter EF2000 Launchable Tanks, Belly Fairings and Subassemblies. Airbus A380 Fan Cowl Phase 3 Equipped. Airbus Military A400M Equipped Units.

AES provides its customers with complete aerostructure assembly management with a firm commitment to quality and competitiveness, in our own facilities or at the customer’s plant.

23 Andalusia Takes Off - Assembly

AES


Andalusia Takes Off - Assembly

25

Aerosur

AEROSUR Aeronáutica del Sur S.A.L. Ctra. Torreblanca, Mairena del Alcor Km 2,6 41500 Alcalá de Guadaíra (Seville) www.aerosursal.com

Aerosur is a privately-owned aeronautical company in which its fundamental value is derived from its high growth rate in the last few years, while it has been training first-class aeronautical teams. Aerosur operations are oriented to integral management of the product it manufactures.

Luis García Casado Director T (+34) 955 63 17 92 F (+34) 955 63 17 10 aeronauticadelsur@aerosursal.com

Products and Services Integral management of fully equipped and tested major aerostructures, especially wings and/or fuel tanks, delivering a completely finished product to FAL.

Key Products CASA C295/CN235 Full equipped Wings. Boeing 737 Rudder. Airbus A320 Section 18 Fuselage.

Focused on integral management


SK10 SK10 is member of Alestis Aerospace.

SK10 Andalucía is a supplier of special alloy and composite material aeronautic structures, which works with the main aircraft manufacturers. Its philosophy is to be a subcontractor that is capable of offering a final product, taking part in the projects as from their conception.

Andalusia Takes Off - Assembly

27

The activities of SK1O Andalucía all fall within the field of design and manufacture of structural components for the aeronautic industry. Such components can be either metallic, or composite, or a mixture of both.

SK10 ANDALUCÍA, S.A. Parque Tecnológico TecnoBahía de Cadiz Avda. Sindicalista Isidoro Gálvez, 23 y 24 11500 El Puerto de Santa María (Cadiz) Rafael Navarro Sánchez General Manager T (+34) 956 26 98 20 F (+34) 956 26 98 09 rafael.navarro@sk10andalucia.com

Products and Services Metal parts assembly. Composite material parts assembly. Structural repairs of composite material parts. Final processes (Application of sealants and paint spraying).

Key Products Airbus Military C295/CN235 - Full equipped Fuselage. Airbus A380 - Main landing Doors. Airbus A340 - Passenger Doors.

Taking projects from conception to completion


Experienced in new development & manufacturing

SK3000 AERONÁUTICA SK3000 Aeronáutica. S.A.U Parque Tecnológico y Aeronáutico de Andalucía - Aerópolis c/ Calbraith P. Rodgers, parcelas 2-4 41309 La Rinconada (Seville) www.sk3000.net Dalton Candido da Silva Engineering Manager dalton.candido@sk3000.net T (+34) 954 115 174 (Ext. 109) M (+34) 639 72 31 21 F (+34) 954 115 181

Products and Services Metal parts assembly. Composite material parts assembly. Structural repairs of composite material parts. Final processes (Application of sealants and paint spraying).

Key Products Embraer RJ 190/195 - Wing Stub. Airbus Military C295/CN235 - Full equipped Cockpit. Airbus Military C295 - Fuselage Undercarriage Fairing. Airbus A320 - Section 18 panels.

SK3000 SK3000 is member of Alestis Aerospace. SK3000 is a supplier of special alloy and composite material aeronautic structures, which works with the main aircraft manufacturers. Our company is a subcontractor that is able to offer a final product, taking part in the projects as from their conception. The activities of SK3000 all fall within the field of design and manufacture of structural components for the aeronautic industry. Such components can be either metallic, or composite, or a mixture of both.

Andalusia Takes Off - Assembly

29


Andalusia Takes Off - Tooling & Mechanical Activities

31


Aercal

AERCAL is a leading supplier of components for the aeronautical sector, with numerous certifications issued by customers and both Spanish and international agencies. The firm has a strategic policy focusing on ongoing improvement of its facilities and processes. AERCAL continues to promote its alliances with other companies in the sector in order to provide integral work package management.

Andalusia Takes Off - Tooling & Mechanical Activities

33

AERCAL S.A. Aeronáutica Calderería S.A. c/ Laurel 1 y 3 Polig. Industrial Los Olivos 41970 Santiponce (Seville) Sebastián Prieto Castizo General Manager T (+34) 955 99 75 08 F (+34) 955 99 75 04 direccion@aercal.e.telefonica.net

Products and Services AERCAL supplies detail parts and assemblies for the aeronautical sector in the field of metal sheet work and machining by numerical and/or conventional control.

Key Products Wide range metallic detail parts fabrication for Airbus Military C295/ CN235, RSAF MRTT & A400M; Airbus A380 Belly fairing, A340-500600 Fan cowls... MTAD assemblies (flare & life raft launch systems, mision consoles, Vimar Pallet...).

Meeting delivery deadlines


Rafael Fernández Martín - Raúl Cruz Rabanal General Manager - Business Development Manager T (+34) 954 99 94 57 F (+34) 954 51 23 90 info@airgrup.com airgrup@airgrup.com

Products and Services Airgrup operations cover the following activities: Manufacture of aeronautical piping systems. Pipe and assembly welding. Surface treatments and painting. Non-destructive testing. Assembly. Engineering and design.

Key Products The most recent and significant projects in which Airgrup is involved providing design, development and manufacture services are the A400M and A330MRTT. We also participate in the following programmes: Airbus A320, A330-340, A380.

Professionals commited to excellence in quality

Airbus Military A400M, A330MRTT, EFA, FALCON 7XX, A320, A330-340, C295/CN235. Embraer 145 & 170. Bombardier CRJ-170. Sikorsky S-92.

Airgrup Airgrup is an industrial firm engaged in the manufacturing of aeronautical pipeline systems. The firm focuses on meeting the needs of its customers based on three key factors: quality, delivery compliance as well as manufacturing and management excellence. Airgrup is a young firm with a team of highly dedicated professionals being one of its most important assets.

35 Andalusia Takes Off - Tooling & Mechanical Activities

AIRGRUP, S.L. Parque Tecnológico y Aeronáutico de Andalucía - Aerópolis c/ Ingeniero Rafael Rubio Elola 2 41309 La Rinconada (Seville) www.airgrup.com


Consur

Committed to technological development, we are leaders in our activities (design, supply management, manufacture) and contribute to society’s industrial development, collaborating with our customers in the search for effective solutions while guaranteeing ongoing improvement.

CONSUR, S.A. Polígono Industrial el Pino c/ Parsi 6 41016 Seville Ignacio González Blanch General Managment T (+34) 954 99 90 42 F (+34) 954 67 26 05 igonzalez@consur.es

Products and Services Large aeronautical machining parts. Aerostructure assembly. Programming and machining on 5 axes of aeronautical parts up to 10 metres.

Key Products Airbus A380 Section 19 Fuselage / A320 Section 18 Fuselage. ARBS BOOM Estructural Beam. Eurofighter EF2000 Radome Frame. Bombardier CRJ900/1000.

Employee professional development is valued

Andalusia Takes Off - Tooling & Mechanical Activities

37

Consur guarantees the integral management of major aeronautical machining parts and aerostructural assemblies for leading aircraft manufacturers in Europe, Spain and Andalusia.


GALVATEC Parque Tecnológico y Aeronáutico de Andalucía - Aerópolis c/ Juan Olivert 22 41309 La Rinconada (Seville) www.galvatec.es Francisco de la Vega Náñez Director T (+34) 954 11 50 26 / 666 59 34 51 F (+34) 954 11 50 27 francisco.delavega@galvatec.es

Products and Services GALVATEC has 4 business lines: Complete range of Steel, Aluminium and Titanium Surface Treatment and Non Destructive Testing. Composites material painting. Sub-assemblies & Part Equipment.

The reference for finishing processes

Integral Package Management (logistics, planning, engineering & manufacturing).

Key Products Surface treatment, non destructive test & full-equipped parts for Airbus Military, Boeing & Dassault.

Galvatec

GALVATEC is a point of reference in Spain in the field of aeronautical part finishing. It specialises in non-destructive testing, the application of surface treatments and equipping aeronautical parts and assemblies. The company has the certifications required to operate in the demanding aeronautical sector, and its special processes have been approved by the quality departments of leading aircraft manufacturers.

Andalusia Takes Off - Tooling & Mechanical Activities

39


Inespasa Inespasa ensure customer satisfaction by delivering high quality products at competitive prices. We guaranteed the ongoing improvement of our processes in our search for business excellence.

Andalusia Takes Off - Tooling & Mechanical Activities

41

INESPASA Industria Especializada en Aeronáutica Parque Tecnológico y Aeronáutico de Andalucía - Aerópolis c/ Ingeniero Rafael Rubio Elola Nº10 41309 La Rinconada (Seville) www.inespasa.com Borja Martínez Quality Assurance Manager T (+34) 955 34 30 00 / 610 70 66 27 F (+34) 955 34 30 03 bmartinez@inespasa.com

Products and Services Design and manufacture of aeronautical tooling (catia v5 and structural calculation). Precision machining of metallic detail parts (high-speed centres & 5 axes). Sub-assembly equipment and installation.

Key products Airbus military A400M. Design & manufacturing of wing fatigue test tooling system. Airbus military MRTT transformation tooling. A380 - A320 - A330 / A400M / ERJ-190 & CN235-C295 detail parts manufacturing.

Total quality manufacturing


INTEC-AIR, S.L. Industrias Técnicas Aeronáuticas, S.L. c/ Via Finlandia s/n (Rec. Int. Zona Franca) 11011 Cadiz www.ghenova.com Rafael Millán Logistics Manager T (+34) 956 07 60 00 F (+34) 956 07 60 07 rafael.millan@intecair.com

Products and Services Manufacture of elementary metal parts, subassemblies and assemblies. Thermal and surface treatments. Chemical milling of aluminium and aluminium alloys.

Key products Sheet metal detail parts for Super Puma, C-295, Airbus A320-330340-380, EF2000, ERJ-145, ERJ-170, ERJ-190, CRJ700, CRJ900, CRJ1000, S-92 y H-92.

International customer base

Super Puma MK2+ Main Structure. C295 Rudder & Horizontal Stabilizer. ERJ-190 Leading Edges.

Intecair INTECAIR is a member of the AERNNOVA group specialising in aeronautical sheet metal and final processes, accustomed to integral management operations and high delivery data and quality standards. The Intecair production processes are continually evolving, using new technologies with investments in cutting-edge machinery.

Andalusia Takes Off - Tooling & Mechanical Activities

43


Integrity and social responsibility

Andalusia Takes Off - Tooling & Mechanical Activities

45

M&M Mecanizados y Montajes Aeronáuticos S.A. Avd. Inventor Pedro Cawley 31 11500 Puerto de Santa María (Cadiz) Abel Gómez Fierro Quality Manager T (+34) 956 86 03 25 / 618 95 53 84 F (+34) 956 54 74 75 / 956 86 13 69 abel.gomez@mecanizadosymontajes.com

Products and Services Manufacture of aeronautical metal elements: Sheet metal parts (aluminium, steel and titanium). Machining detail parts. Metallic detail parts equipment and subassembly installation. Tool manufacturing. Surface treatment processes (steel and aluminium). Non-destructive testing (liquid penetration inspection, hardness and conductivity tests).

Key products Detail & equipped parts CN-235 / C-295 / A-320-340-380 / MRTT / SUPERPUMA / ERJ 170-190.

M&M The M&M Project is the result of a collaborative process based on the organisation’s flexibility, as we continue to perfect and enhance the quality of our products and services. It is our mission to satisfy our customers’ needs and expectations with high-quality processes and excellent results thanks to a team of experiences professionals, our innovation capabilities and use of the best practices.


Mecaprec

Andalusia Takes Off - Tooling & Mechanical Activities

47

MECAPREC supplies products and services to the aeronautical sector with quality and reliability, following our customers’ standards and requirements and in compliance with the standards applicable by the regulatory authorities. MECAPREC Mecaprec, S.L. c/ Algeciras, s/n Polígono Industrial Zona Franca 11011 Cadiz

MECAPREC manufactures machining elements and assemblies, tooling, integrated equipment and machinery for specific production processes. We are able to manage all the finishing processes and thermal treatments of our products, and provide guaranteed raw material supply management.

Francisco Garrido Sánchez Financial Director T (+34) 956 29 02 28 F (+34) 956 29 02 29 mecaprec@mecaprec.es

Products and Services Mecaprec manufactures full range from machining parts to complete assembly installations, including the manufacturing of equipped elements and tooling.

Key products MECAPREC participates in the following aircraft programs: CN235-C295, FALCON 7X, A320, A330, A340, A380, A400M y EFA.

Process-based management


Andalusia Takes Off - Tooling & Mechanical Activities

49

MEUPE We aim at complete customer satisfaction and competitiveness is our letter of presentation.

MEUPE Pol铆gono Industrial La Era Empedrada c/ Toneleros con esquina c/ Le帽adores 41806 Umbrete (Seville)

Our goal is to guarantee the trust of customers and collaborators, MEUPE has established a management system based on the EN-9100 international aeronautical standard. It is part of our commitment to development.

Francisco Javier L贸pez-Cepero Raig贸n Business Develoment Manager T (+34) 955 71 79 99 F (+34) 954 18 41 03 jlopezcepero@meupe.com

Products and Services Precision machining. Assembly of equipped elements. Integral management of detail parts and assemblies. Manufacture of aeronautical components.

Key Products Precision machining parts for Airbus Military, Embraer, Boeing, Falcon, Bombardier & Alestis Aerospace.

Precission Machining


SERVIMEC MECANIZADOS S.L. Pol. Ind. Macarena Nave 23 41015 Seville www.servimec.net Antonio Peinado ResurrecciĂłn General Manager T (+34) 954 37 26 00 / 954 37 26 03 F (+34) 954 37 11 59 antoniopeinado@servimec.net

Products and Services Machining parts and equipped elements. Thread rolling. Structural subassembly. Programming.

Professional development

Key products Airbus Military C295-CN235 Machining and equipped elements.

Servimec

Servimec helps to increase our customers’ productivity and competitiveness thanks to teamwork and the high quality standard applied to our products. As your most reliable provider, we always deliver on time.

Andalusia Takes Off - Tooling & Mechanical Activities

51


Sevilla Control In its four production centres located in Seville, SevillaControl completes the manufacturing of metal and non-metal detail parts for aeronautics.

Andalusia Takes Off - Tooling & Mechanical Activities

53

SevillaControl is known for its high technological level in cutting-edge machining tools and a highly qualified team of professionals.

SEVILLA CONTROL, S.A. Polígono Industrial Calonge c/ Metalurgia 15 41007 Seville Antonio Megolla Melero Systems Director T (+34) 954 35 83 48 F (+34) 954 35 72 80 antonio.megolla@sevillacontrol.es

Products and Services Machined detail parts up to 6 metres. Thirty (3 to 5 axes) machining centres.

Key Products Wide range of machined detail parts for Airbus Military (A400M, A330 MRTT, C295-CN235), Assistance Aéronautique & Aérospatiale and Alestis Aerospace.

Cutting edge technology


STSA Sdad. Tratamiento Superficies Aeronauticas, S.A. FAL 400M AutovĂ­a A4 - Km 528,5 Nave 4 (Hangar de Pintura) 41020 Seville

Technologically advanced facilities

Carlos A. Herrera Administration Manager T (+34) 955 40 94 38 F (+34) 955 40 94 39 carlos.herrera@stsa.es

Products and Services Application of paint and sealant on complete aircraft or large aerostructures. Manufacture, supply and installation of interior aircraft equipment.

Key Products Airbus Military A400M, C295 & CN235 complete Sealing & Painting. Other aircrafts from Alitalia, Air Nostrum, Jet Airfly, Blue Wings... fleet.

STSA ensures the watertightness and surface protection of complete aircraft; it has the most modern and technologically advanced painting facilities in the world. With a team of 100 qualified professionals, it operates all over Spain, collaborating with airlines in the surface treatment of their aircraft.

Andalusia Takes Off - Tooling & Mechanical Activities

STSA

55


Andalusia Takes Off - Tooling & Mechanical Activities

57

TADA, S.A. Técnica Aeronáutica, Defensa y Automoción, S.A. Pol. Ind. Ctra. Amarilla. Avda. de la Prensa, 8 41007 Seville www.tada.es

TADA

Since 1959 TADA has specialized in machining, surface treatments, assembly and tooling for aerospace industrial sector. We offer to our clients a cooperation in an integral service, from product development to final turn-key product delivery.

Manuel Osorio Cortés Vice President T (+34) 954 51 29 66 / 655 94 85 95 F (+34) 954 25 08 18 tada@tada.es

Products and Services CNC Machining. Structure and substructures assembly. Surface treatment. Tooling.

Key Products EF2000 Wing assembly tooling. Vulcano-Arianne Engine support. A320 & CN235 Flying simulator structure. Boeing B717 Carriage & Flap roller box. Airbus A320 - A340 - A380, Bombardier CRJ700 & Embraer 145-170 Subassemblies and detail parts.

The best partner for Aeronautics, space & defence


EIIT Electrónica Informática Instrumentación y Telecomunicaciones S.A. Polígono Industrial Aguisgrana c/ Austria s/n. Nave 5 23200 La Carolina (Jaen) www.eiit.com Gabriel Antolínez García General Director T (+34) 918 90 46 14 F (+34) 918 90 73 58 gabriel.antolinez@eiit.com

Products and Services TEST engineering applied to the aerospace and defence industries. Automatic testing equipment: VF3522 vision systems, MDA functional systems for fault analysis and low and high voltage wiring verification systems. Online systems: We manufacture online systems including MDA or in-circuit testing, vision tests and/or tracking marking/reading systems. Fixtures and receivers: Mechanical, pneumatic and vacuum systems for all manufactures and receivers with rapid fixture change. Customised applications: Comprehensive solutions in pneumatics, hydraulics, robotics, local and remote acquisition systems and industrial process monitoring.

Key products Airbus Military A400M Aircraft Monitoring Systems & Interfaces. Design, Manufacture & Integration. A400M Break Control system. Eurocopter NH90 Prototype Integration Test Rig.

61

EIIT EIIT/3T is a business group which designs and manufactures high tech products. It has been operating for over twenty years in the automatic testing equipment sector. EIIT/3T is a technological leader in the design, development and manufacture of testing equipment, providing innovative, customised turnkey solutions. It is a point of reference in markets as demanding as the aeronautic, defence or motor vehicle sectors.

Andalusia Takes Off - Electrical & Electronic Systems

Flexibility & innovation


Continued investment in R&D

Elimco ELIMCO creates technological solutions with added value tailored to its customers’ expectations, by means of innovative projects based on the principle of management excellence. ELIMCO is an international point of reference capable of developing integral products and services (design engineering, manufacture, integration and maintenance of multidisciplinary systems), with its core business found in electrics, electronics and avionics in the defence and civil sectors. ELIMCO is the Spanish leader in the design and production of harnesses, cabin control units and test benches.

Paula Montoya Marketing & Comunication Manager T (+34) 954 36 78 70 F (+34) 954 35 22 54 pmontoya@elimco.com

Products and Services GROUND SYSTEMS - Integration Test Rigs, Functional Test Benches, Telemetry/Telecontrol Ground Stations, HW/SW Simulation, Ground Support Equipment (GSE), MRO Test Benches. ON-BOARD SYSTEMS - Harnesses, Control Units & Bays, Consoles, Customized Equipments. CUSTOMER SUPPORT SERVICES - In-Field Systems Engineering, Maintenance, Repair & Overhaul (MRO), Integrated Logistic Support (ILS), Platform Retrofit / Upgrades / Transformation, Assembly / Commissioning / Start-Up. UNMANNED AIRCRAFT SYSTEMS - Mini & Tactical Unmanned Aerial Vehicles (UAV), Unmanned Aerial Target Drones (UAT) & Ground Control Systems (GCS).

Key products High tech testing benches for complex Airbus Military A400M systems (boresighting, pressurisation, pipes, avionics, flight control, etc.). FTD flight simulator for the Airbus Military A330MRTT programme. Complete wiring system of the first two A330MRTT (tanker version) aircraft for Australia. SCAN: Mini UAV - lightweight aircraft vigilance system. X-VISION: Tactical UAV - Medium scope air observation system.

63 Andalusia Takes Off - Electrical & Electronic Systems

ELIMCO ELIMCO Soluciones Integrales, S.A. Parque Tecnológico y Aeronáutico de Andalucía - Aerópolis c/ Hispano Aviación 7-9 41309 La Rinconada (Seville) www.elimco.com


Navair Since 1993, NAVAIR has been maintaining its aim of developing and manufacturing products for Defence. After excellent results for 15 years, NAVAIR has recently aimed at internationalisation, establishing new facilities in Mexico.

Andalusia Takes Off - Electrical & Electronic Systems

65

NAVAIR Navair, S.L. Parque Tecnológico y Aeronáutico de Andalucía - Aerópolis c/ Juan Olivert, nº 26 y 28 41309 La Rinconada (Seville) www.navair.es Alberto Simón Zambrano General Director T (+34) 954 91 56 46 F (+34) 954 91 53 33 a.simon@navair.es

Its innovation capabilities became a multinational corporation.

Products and Services Design and manufacture of harnesses, mechanical equipment & pipeline systems for aeronautic & space.

Key Products SPACE: VEGA project (harnesses). AERONAUTICS: CN-235, C295 and C212 (harnesses and central stations); ERJ 145/135 (pipe supports); CRJ 700 and CRJ 1000 (pipe supports); A340, A380 and A400M (aeronautical unions) & SH60R helicopters (harnesses).

Innovation as backbone


69

Elena Arboli Manager Assistant T (+34) 956 54 91 76 / 956 54 91 79 F (+34) 956 54 92 08 informacion@easy-is.com

EASY Easy Industrial Solutions aims to satisfy its customers’ needs from a different, innovative perspective. We work focused on functional flexibility, Efficacy and accessibility based on organisational simplicity. Easy Industrial solutions, ongoing improvement based on permanent innovation.

Products and Services Composite and carbon fibre production detail parts. Hand Lay Up Design and development production processes. VARTM product Development and manufacturing. RTM productive processes development. Consultancy and advisory services in the process of management system certification according to ISO 9001, ISO 14001, EN 9100, OHSAS 18001, PECAL, ISO 10012, UNE 166002 standards. Energy audits and metrological optimisation processes.

Key Products Composite and carbon fibre production detail parts (hand lay up, VARTM & RTM tecnologies) for Airbus & Airbus Military.

Andalusia Takes Off - Composite & Plastic Materials

EASY INDUSTRIAL SOLUTIONS S.L. Parque Tecnológico TecnoBahía Ctra. El Puerto Santa María - Sanlúcar km 5,5 c/ Ingeniería, 4 11500 El Puerto de Santa María (Cadiz) www.easy-is.com

Easy solutions for a complex world


Sacesa SACESA is member of Alestis Aerospace.

Elena Domínguez Sánchez Manager Assistant T (+34) 95 499 84 61 F (+34) 95 467 09 93 elenadominguez@sacesa.com

Products and Services Design, calculation, structural testing, certification. Tooling design and manufacturing. Manufacture of structures in composite materials (carbon fiber, glass fiber, kevlar, etc., with or without core). Metal-metal bonding. Aerostructure assembly.

Key products A-320 Horizontal Tale Plane (HTP) – Trailing edge Covers & Ribs / Lateral box Ribs. A-340/600 HTP – Trailing edge Fittings, Ribs & Covers / Lateral box Ribs. A-380 Belly Fairing Panels & Sistems.

Manufacturing excellence

A400M Horizontal Stabilizer & Fan Cowls. Boeing B-777 - Flaps & Spoilers. Boeing B-787 HTP - Forward Torsion Box Panels.

SACESA is involved in high added value programmes for the manufacture of aerostructures in composite materials, providing our customers with reliability, technical and financial security. SACESA’s expertise covers everything from part design, calculation and certification to manufacturing excellence, a key competitive advantage for aircraft manufacturer contracts.

71 Andalusia Takes Off - Composite & Plastic Materials

SACESA Sociedad Andaluza de Componentes Especiales, S.A. Carretera Nacional IV, Km. 531 (Apartado Correos 4.188) 41080 Seville www.sacesa.com


SOFITEC Parque Tecnológico y Aeronáutico de Andalucía - Aerópolis c/ Juan Olivert 38 41309 La Rinconada (Seville) www.sofitec.es Iván Marín Comercial Director T (+34) 954 11 51 23 F (+34) 954 11 51 24 ivan.marin@sofitec.es

It is the mission of SOFITEC to provide customers with INTEGRAL PRODUCT MANAGEMENT, satisfying all their aerostructure demands with any technology. Our technological resources ensure our flexibility, cost-optimisation and deadline compliance policy, as does our team of professionals.

Andalusia Takes Off - Composite & Plastic Materials

Sofitec

73

Products and Services SOFITEC designs, manufactures and assembly aeronautical components in metal and composite materials, providing Integral Product Management in: Design. Manufacturing engineering. Sheet metal parts fabrication. Machining (3 to 5 axes) and composite materials (Hand Lay up, RTM light, VARTM, RFI). Assembly. Wiring systems. And full supplementary processes (purchasing, supply and logistic management).

Key Products Airbus A320 Skins, machined detail parts & subassemblies. Airbus A340/600 Tail cone composite fittings & metallic detail parts. Boeing 777 HTP machined skins. A330 MRTT, A400M & Eurofighter 2000 Wide range of metallic and composite products.

Providing customers with integral product management


AERTEC AERTEC Ingeniería y Desarrollos, S.L. Parque Tecnológico de Andalucía, c/ María Curie, 10 29590 Malaga www.aertec.es Antonio Gómez-Guillamón General Director T (+34) 952 02 02 48 F (+34) 952 02 01 74 info@aertec.es

AERONAUTICAL INDUSTRY (CONSULTANCY – INFRASTRUCTURES – INDUSTRIAL OPERATIONS – SYSTEMS) Industrial organisation with Lean and Six Sigma philosophies. Definition of internal and external logistic processes. Definition & development of supply chain, processes, assembly tooling and IT tools.

International benchmark in the aeronautical industry and airport sector

Aeronautical systems (fuel, electric, hydraulic, power plant, landing gear, avionics), testing benches and equipment, aeronautical software, systems for unmanned aircraft. AIRPORTS (CONSULTANCY – INFRASTRUCTURES – AIRPORT OPERATIONS – SYSTEMS) Airport master plans, Feasibility studies, Capital expenditure and operability studies, safety and emergencies Consultancy; Airfields, Terminal areas, Airport installations, AGL and Navigation Aids, Airport Operations, Safety and emergencies Infrastructures; ICT, Process control and operation Systems.

Key products FAL A400M Logistic & Assembly Planning / External Logistic Center Infrastructure & Consultancy. CAP MRTT Industrial Organization & Logistics Consultancy. Airbus Military A400M RAT Retraction Tool. CASA C295/CN235 FAL relocation Management. Airbus Military A400M AIM’s Project Management.

Aertec It adds value to all the aeronautical programmes in which it is involved, with highly qualified personnel specialising in industrial operation engineering, aircraft systems and specific infrastructures.

Andalusia Takes Off - Engineering & Consulting

Products and Services

77


Guaranteed success in complex engineering projects

Ghenova Ghenova is an independent engineering firm with over 300 employees operating in four major fields: aeronautics, naval, civil and industrial engineering. Since 1998, Ghenova’s aeronautical division has developed engineering services combining technical skills with the company’s expertise in major projects.

GHENOVA INGENIERÍA Edif. Galia Puerto, Crta Esclusa 11 41011 Seville www.ghenova.com

GHENOVA Ingeniería provides consulting and multidisciplinary engineering services, giving priority to quality, safety, deadline compliance and environmental respect, and promoting its staff’s technical and management skills. The latter thus become intellectual assets in service provision to its Spanish and international customer base.

Rafael Romero Galindo Aeronautics Division Manager T (+34) 652 81 86 06 F (+34) 955 04 53 79 rafael.romero@ghenova.com

Products and Services Aerostructure calculation and design, tooling design, production management, numerical control programming (3/5 axes), manufacturing engineering support, technical publications, logistic support analysis (LSA).

Key products Airbus A350 XWB Belly Fairing Design. Airbus A380 Belly Fairing panels certification. Boeing B787 Horizontal Stabilizer.

Andalusia Takes Off - Engineering & Consulting

79


MDU, S.A. Militärtechnologie, Dienst und Überwachung S.A. Polígono P.I.S.A. c/ Manufactura 4, Edif. Logos 1, 1ª Planta 41927 Mairena Del Aljarafe (Seville) www.mdu-sa.com

Andalusia Takes Off - Engineering & Consulting

81

Fernando López Rey Quality & Industrial Security Manager T (+34) 954 18 90 10 / 685 45 19 68 F (+34) 954 18 91 39 flopez@grupoiud.com

Products and Services Testing systems. Critical systems. Airborne HW according to RTCA DO 254. Airborne SW according to RTCA DO 178. Systems engineering services. Telemetric flight testing. System integration. Datalinks. HW and SW simulators.

Key products Design, development and manufacture of A400M, A330MRTT HW and SW testing benches.

First class team of professionals

Airbus Military A400M AIMs & DLW. Acquisition systems, SEAS SW simulation. HW and SW maintenance and onsite operations.

MDU MDU is a point of reference for Intelligence and Defence in the systems field, capable of providing services to driving companies in the aeronautical and aerospace sectors. It is our mission to be capable of creating value on any aeronautical platform in our own right. MDU designs, develops, produced and maintains components, systems and airborne hardware and software for the aeronautical and defence industries.


Andalusia Takes Off - Engineering & Consulting

83

MP Pol. Ind. Calonge. c/ Metalurgia, 5 41007 Seville www.mpcorporacion.com Alfonso Vargas Sรกnchez Engineering Director T (+34) 954 35 05 68 F (+34) 354 43 63 56 avs@mpcorporacion.com

Products and Services Engineering and industrial services. Manufacturing and assembly process engineering. Tooling design, manufacture and assembly. Integral maintenance services. Productive means and facilities implementation.

Referencia

Key Products C295 and CN235 final assembly re-engineering.

Engineering for productivity

Definition of A400M final assembly processes. Analysis, development and update of assembly processes. LEAN manufacturing processes and assembly tools.

MP

MP is Engineering and Industrial Services. MP applies engineering to productive processes in the aeronautical sector, with integral projects in manufacturing and assembly processes; tooling design, manufacture and assembly. MP has high added value industrial services such as integral productive means and facility maintenance and logistic management of specific spare parts & systems.


TEAMS, S. L. Testing and Engineering of Aeronautical Materials and Strutures, S. L. Parque Tecnológico y Aeronáutico de Andalucía - Aerópolis Wilbur y Orville Wright, 1 41309 La Rinconada (Seville) www.teams.es Alejandro Arroyo Más Quality Manager T (+34) 954 11 50 60 F (+34) 954 11 50 32 alejandro.arroyo@teams.es

Products and Services Mechanical testing. Physical-chemical and metallographic testing. Environmental testing. Structural testing.

Key Products

Certify the safety flight of materials and design

Airbus A320 HTP Rib Shear Tie Test, HTP ESG Stringer Run Out, HTP ESG Hinge Fitting Fatigue or Run Out Fulcodem. A380 Rudder Bearing Lubrication Test. A350 Flotability Test. A400M Qualification Test-Shielded Overbraiding of Electrical Harnesses.

TEAMS TEAMS is a company created to support the aeronautical sector in the materials field by means of mechanical, physical-chemical and structural testing, plus instrument verification and calibration processes. TEAMS certifies the flight safety of materials and designs.

Andalusia Takes Off - Analysis & Testing

87


Andalusia Takes Off - Services

89


A&G

Purchasing and distribution centre performing material flow-related functions (metal raw material, sealants, paint, rubber and standardized items) from the generation of the purchasing requirement to delivery to the productive process. With our magnificent 14,000 m2 facilities, we provide optimal material storage logistics, with cutting and distribution capacity sufficient to supply the entire sector.

Andalusia Takes Off - Services

A&G is a logistic platform which organises, optimises and distributes materials in the complex logistic production management system in the aeronautical sector.

91

AyG SEVILLA, S.L. PolĂ­gono Industrial La Isla, c/ RĂ­o Viejo 69, Parcelas 21 y 22 41700 Dos Hermanas (Seville) Fernando Salcedo MartĂ­nez Quality Director T (+34) 954 93 17 96 / 690 93 50 95 F (+34) 954 93 19 32 fernando.salcedo@aygsevilla.com

Products and Services Material Logistics (Storage, Disk cutting, CNC machining, Distribution). Sealant Logistics (Storage, Mixing & Cryogenisation, Distribution in isothermal containers). Standard Logistics (Storage on rotating tray units and cantilever shelving, KANBAN distribution). Paint, Rubber & Adhesive Logistics (Storage in controlled temperature and humidity conditions, Distribution).

Key products Material, Sealant & Standard Logistics for Airbus Military (Seville & Cadiz Facilities).

Customer oriented service


A&G

Aercal

Aernnova

AES

Aerosur

Aertec

Airgrup

Alestis

Consur

EASY

EITT

Elimco

Fada-Catec

Galvatec

Ghenova

Inespasa

Diagrams & Tables - Clients of Reference Intec-Air

MAVE

MDU

M&M

Mecaprec

Meupe

MP

- Andalusian Global Statistics Navair

- Complete Sector List & Activities Servimec

Sacesa

Sevilla Control

SK10 Andalucía

SK3000 Aeronáutica

Sofitec

STSA

TADA

TEAMS

Andalusia Takes Off - Diagrams & Tables

Company US ARMY

THE BOEING COMPANY

THALES

SPANISH ARMY

SONACA

SIKORSKY

LOCKHEED MARTIN

LEACH INTERNATIONAL

JET AIRFLY

ITP

ISDEFE

INTA TECNOLÓGICA

INDRA

IBERIA

EUROCOPTER

EMBRAER (Empresa Brasileira de Aeronáutica)

DASSAULT

DAIMOS SPACE

BOMBARDIER

BOEING RESEARCH & TECHNOLOGY EUROPE

BLUE WINGS

AMPER

ALITALIA

ALESTIS AEROSPACE

ALENIA

AIRBUS MILITARY

AIRBUS

AIR NOSTRUM

AERNNOVA

AENA

AAA (Asístanse Aeronautique & Aerospatiale)

Client

Clients of Reference 93


Andalusian Global Statistics 1% 4% Seville Cadiz Jaen Cordoba Malaga Huelva

16%

76%

Millions of Euros

Nr. of Employees

1600 1400 1200 1000 800 600 400 200 0

8000 7000 6000 5000 4000 3000 2000 1000 0

Millions of Euros

Nr. of Employees

900

500 300

800 700

Millions of Euros

700

250 200 150

800

100

400

0

Airbus Products CASA Products Other Products

2001

2002

2003

2004

2005

2006

2007

0

2008

95

300

1200

400

Airbus EADS-CASA

350

1600

600

100 Comercial Logistic Quality I+D Engineering

Thuosands of Euros / Employee

2000

800

200 Nr. of Employees

Airbus EADS-CASA

2400

1000

2001 2002 2003 2004 2005 2006 2007 2008

2001 2002 2003 2004 2005 2006 2007 2008

Airbus EADS-CASA

50 2001

2002

2003

2004

2005

2006

2007

0

2008

2001

2002

2003

2004

2005

2006

2007

2008

600

600

500

500 400

400

300

300 200

200

100

100

0

0

2001

Millions of Euros

60 50

2002

2003

2004

2005

2006

2007

2008

EROCOPTER products BOEING products BOMBARDIER products EUROFIGHTER products EMBRAER products

40

Subcontractors & Suppliers 2001

2002

2003

2004

2005

2006

2007

2008

Thuosands of Euros / Employee

Millions of Euros

Nr. of Employees

% (Inversion I+D / Facturation)

Thuosands of Euros / Employee

200

400

5000

6

90

175

350

4500

150

300

125

30

100 75

20

0

2001

2002

2003

2004

2005

2006

2007

2008

2500

150

2000

0 2001

2002

2003

2004

2005

2006

2007

2008

2002

2003

2004

2005

2006

2007

2008

40 30 20

1

500 2001

50

2

1000 0

60

3

1500

50

25 0

200

70

4

3000

100

50 10

3500

250

80

5

4000

2001

2002

2003

2004

2005

2006

2007

2008

0

10 2001

2002

2003

2004

2005

2006

2007

2008

0

2001

2002

2003

2004

2005

2006

2007

2008

Andalusia Takes Off - Diagrams & Tables

1%

2%

Main Contractors


Activity

Aerostructures Assembly

Engine Assembly

Sub-Assemblies

System & Equipment Assembly

Mechanical Activities

Tooling

Sheet Metal

Final Processes

Composite & Plastic Materials

Electrical & Electronics Devices

Engineering & Consulting

Services

Test

Space

General Aviation continues

Andalusia Takes Off - Diagrams & Tables

Final Assembly ISOTROL

INTERFACE

INTECAIR

INTA

INSTITUTO DE LA CALIDAD

INFASUR AERONÁUTICA

INESPASA

INDRA

INDALO

INCODATA

INASMET

INASEL

INABENSA

IMP

IAT

HASA

GRUPO SIMGI

GRUPO LACAÑINA

GREEN POWER

GRABYSUR

GMA AERONÁUTICA

GHENOVA

GED SPAIN

GALVATEC

G.A.H.A.- ARANDA

FUNDACIÓN HÉLICE

FRANCISCO CANO SANCHA

FLIGHT TRAINING EUROPE

FADA-CATEC

FAASA

EMERGE

ELIMCO

EITT

EASY INDUSTRIAL SOLUTIONS

EADS-CASA

DOMÍNGUEZ TOLEDO

DITECSA

CVYC

CONSUR

COMPUTADORES MODULARES

COMPASUR

CESA

CENTRO ANDALUZ DE METROLOGÍA

CEIVA

CAYCO

CAUCHOS PEDRO ROMERO

CANAGROSA

CADIP

BEAT ANDALUCÍA

AUXIPLE

AT4 WIRELESS

ASSYSTEM IBERIA

AMPER

A. MARTINEZ RIDAO

ALTRAN

ALESTIS

AIRGRUP

AIRCRAFT CABIN TECHNICIANS

AIRBUS ESPAÑA

AICIA

AERTIS

AERTEC

AEROTEC

AEROSUR

AEROSPACE ENG. GROUP

AEROSERV

AERÓPOLIS

AEROESTRUCTURAS SEVILLA

AEROEPOXY

AERO-AVANCE

AERO SMART

AERNNOVA

AERCAL

ADVANCED DYNAMIC SYSTEM

A&G SEVILLA

Company

Complete Sector List & Activities 97


Activity UNIVERSIDAD DE CÁDIZ

UMI

UCOAVIACIÓN

UBITEL

TRC

TRATERCOM

TORSESA

TITANIA ENSAYOS Y PROYECTOS IND.

TINOCO AEROESPACIAL

TELVENT

TEDINSA

TECNOLÓGICA

TECNIGRAB

TÉCNICAS AERON. SEVILLA

TECAER SEVILLA

TEAMS

TALLERES J.PÁEZ

TALLERES GARRUCHO

TAGONSA

T.A. ESPEJO DELGADO

TADA

TACH

SURIMEX

SUMINISTROS IND. PÉREZ CARDOSO

STSA

SONIC COMPOSITES

SOFITEC INGENIERÍA

SMA

SLI

SK3000 AERONÁUTICA

SK10 ANDALUCÍA

SEVILLA CONTROL

SERVIMEC

SERTEC

SDI

SAINSEL

SACESA

REYPLAS

RAFAEL Y RAMÓN

QUINTA INGENIERÍA

QUALITAIRE ESPAÑA

PRODIPRO

PRESCAL

NAVAIR

MP COMPONENTES MECÁNICOS

MEUPE

METAL IMPROVEMENT CO.

MESUREX

MESIMA

MEINSUR

MECATECNIC

MECASUR

MECAPREC

MECANIZADOS Y MONTAJES AERON.

MECANIZADOS VIRTUAL

MECANIZADOS ÍÑIGUEZ

MECANIZADOS CALONGE

MECANISUR

MECÁNICA DE PRECISIÓN

MDU

MAVE AERONÁUTICA

MÁRQUEZ HNOS.

MALAGA AIR MAINTENANCE

MAGTEL

LTK 400

LTK ANDALUCÍA

LÁSER GUADALQUIVIR

LANGA INDUSTRIAL

KAEFER

ITP

Company

Complete Sector List & Activities

TOTAL

Final Assembly 1

Aerostructures Assembly 19

Engine Assembly 3

Sub-Assemblies 31

System & Equipment Assembly 19

Mechanical Activities 42

Tooling 22

Sheet Metal 11

Final Processes 19

Composite & Plastic Materials 14

Electrical & Electronics Devices 15

Engineering & Consulting 61

Services 37

Test 23

Space 9

General Aviation 7

Andalusia Takes Off - Diagrams & Tables

99


Andalusia Takes Off - Aknowledgements

101

LaCamaradeMusicas and Estudio Pedro Cabañas would like to express their deepest gratitude to Fundación Hélice, Fundación Fada-CATEC, Agency for Innovation and Development of Andalucía - IDEA and EXTENDA, for putting their trust in us and contributed with their support to this project. We would also like to thank all the aeronautical companies and professionals who have helped us facilitating and encouraging our work. Thanks also to more than 7500 persons who have achieved to stand this Andalusian industrial sector in its current heights.


andalusia_takes_off_editable  

PHOTOGRAPHY © Oscar Romero V. © Lolo Vasco © José Antonio de Lamadrid TEXT © Fundación Hélice MULTIMEDIA © Oscar Romero V. & Raúl Rodríg...

Read more
Read more
Similar to
Popular now
Just for you