PUTTING BOOT ON 1. Open buckles, pull tongue forward, slide foot into liner and close tongue. Outer side of liner must wrap over inner side of liner (FIGURE 2A) 2. Align top cable with the top two tongue grooves and latch down top buckle (FIGURE 2B) 3. Tighten middle buckle. Use next two tongue grooves down to align cable 4. Repeat for lower buckle using the bottom two tongue grooves 5. Tighten each lever to achieve optimal fit 6. Thread end of power strap through metal loop and pull tight across tongue, attaching velcro together.
FIGURE 2A
10
FIGURE 2B