Ultrapure Technology Source Book

速 Vol. IV No. X

CLEANROOM

BIO - PHARMA

MICRO - NANO

INDUSTRIAL

PRODUCT SOURCE BOOK www.ultrapuretechnology.com

Product Line Card Clean Room Components

Filters

Air Showers / Air Locks H.E.P.A. Vacuums Garment Storage Units Laminar Flow Consoles - Horizontal & Vertical Motorized H.E.P.A. Filters Pass Thru-Material & Cart

A.S.H.R.A.E. Filters Bag Filters H.E.P.A. & U.L.P.A. Filter Pleated Filters

Clean Room Paper & Documentation

Garments & Apparel (Tyvek & Polyester)

8.5”x11” Copy Paper, 3 wgts., 3-hole Punched 11”x17” Copy Paper Computer Forms, Continuous & Greenbar Notebooks, Planners, Clipboards & Pens

Beard Covers, Polypropylene Boot & Shoe Covers, Disposable & Reusable Bouffant Hats, Polypropylene & Tyvek Coveralls, Disposable & Reusable Face Masks, Earloop, Tie-behind, Cone Frocks, Disposable & Reusable Lab Coats, Disposable & Reusable Sleeves, Disposable & Reusable

Clean Rooms Modular Hardwall Systems & Components Softwall Units-Standard & Custom Configured Renovations / Expansions

Clean Room Furniture Carts, Utility Chairs-All Classes & Anti-Static Garment Racks & Storage Cabinets Glove Boxes, Acrylic Shelving-Chrome, Plastic & Stainless Tables-Laminate, Static-dissipative, Stainless

Clean Room Instrumentation Flow Meters Magnehelic Gauges Particle Counters (Met One)

Clean Room Maintenance Buckets, Plastic & Autoclave Stainless Cleaning Solutions Mops-Flat Sponge, Roll & String Motorized Shoe Cleaners Swabs-Cotton, Foam & Wrapped Sterile Alcohol & Cleaning Chemicals Tack Rollers, Film or Foam Wipers-Class 1 to Class 100,000 & Sterile

E.S.D. Equipment & Ionization

Gloves & Cots Cotton Lisle Gloves Finger Cots-Latex & Static-dissipative Gloves-Latex, Nitrile, Nylon, Vinyl & Sterile

Mats, Antifatigue, Disposable & Permanent Tack Antifatigue Mats, Polyurethane, Nitrile & Vinyl Antistatic Mats & Runners, Floor & Table Top Reusable contamination control mats, Peeloff contamination control mats.

Packaging, Bags, Sheets & Tubing, Antistatic Aclar, Cleanroom & Industrial Bear Poly, Cleanroom & Industrial Nylon, Cleanroom & Industrial Teflon (TEP), Cleanroom & Industrial

Swabs & Wipers Sealed Edge Wipers, Polyester wipers Pre-saturated Wipers, Poly-Cellulose wipers Polypropylene Swabs, sterile wipers, Cotton Tipped Swabs

Benchtop Blowers Blow-Off Guns Flow Bars Grounding Cords & Straps Static Field Meters & Charged Plate Monitors

PH: 1-800-932-0309 || FAX: 770-932-0809 || www.ultrapuretechnology.com

Table of Contents Latex Gloves: 4

Nitrile Gloves: 5 Vinyl Gloves: 6 Chemical Gloves: 7 Coated Gloves: 8

Inspection Gloves: 9

Finger Cots: 10 Apparel Hats / Shoecovers: 11 Apparel ProClean: 12 Apparel Tyvek-ProShield: 13 Apparel Suprel LS: 14 Apparel Tyvek / ISO Clean:15 Apparel Face Masks: 16 Stationery: 17 Cleanroom Wipers ISO Class 3-4: 18 Cleanroom Wipers ISO Class 5-7: 19-20 Cleanroom Specialty Wipers: 21 Cleanroom Sterile Wipers: 22 Cleanroom Presat Wipers: 23 Swabs: 24-27 Mats & Flooring: 28 Cleanroom Tape: 29 Hand Lotions: 30 Detergents: 31 Disinfectants: 32-33 Cleanroom Mops & Rollers: 34-35 Mop Buckets / Wringers: 36 Cleanroom Vacuums: 37 Particle Counters: 38 Clean Packaging: 39 Ionization Equipment: 40-41 Acrylic Dispensers: 42 Trash Receptacles: 43 Cleanroom Chairs: 44-45 Motorized Shoe Cleaner: 46 Benches, Cabinets & Sinks: 46 Cleanroom & Specialty Table: 47 Tables, Shelves & Racks: 48 Cleanroom & Lab Carts: 49 Starsys Lab Systems: 50-51 Laminar Flow Equipment: 52 Cleanroom Components: 53 Cleanroom Ceiling Systems: 54 Softwall Cleanrooms: 55 Modular Cleanrooms: 56 Pharmaceutical Cleanrooms: 57 In-Plant Offices: 58 Mezzanines: 59 Gator Jaw: 60-61 Modular Drawer Cabinets: 62 Manufacturers List: 63

Our Mission Ultrapure Technology, Inc. strives to provide the highest quality products at the most competitive prices. Customer satisfaction is paramount to the success of our business. Our goal is to provide quality products in a timely manner that exceeds the expectations of our customers.

Terms & Conditions Our payment terms are 1% 10, net 30 days from the invoice date. Title passes on to customer at the time goods enter mode of transportation.

We will ship the least expensive way, unless a specific carrier is requested by the customer. No returns will be accepted without return authorization from Ultrapure Technology.

Warranty Policy We will stand behind our Full One-Year Warranty on all items which Ultrapure Technology manufactures. On all distributed goods, we will pass along full manufacturer’s warranty.

ULTRAPURE TECHNOLOGY, INC. 325 Brogdon Road Suwanee, GA 30024 770-932-0309 - Fax: 770-932-0809 1-800-932-0309

PH: 1-800-932-0309 || FAX: 770-932-0809 || www.ultrapuretechnology.com

Latex Gloves CHS Series -

Hand Specific Powder Free Class 10 Latex Gloves.

Textured Surface.

Tapered, Beaded Cuff.

12” Length, Hand Specific.

Qualified for Use in the Pharmaceutical Industry.

CHS 600

Size: 6.0

CHS 750

Size: 7.5

CHS 900

Size: 9.0

CHS 650

Size: 6.5

CHS 800

Size: 8.0

CHS 1000

Size: 10.0

CHS 700

Size: 7.0

CHS 850

Size: 8.5

- 50 Pairs / Pack - 4 Packs / Case - 200 Pairs / Case - Textured Surface

- Low Protein and Contact Sensitizers - Double Chlorinated - Leak Tested

PFXT Series - Hand Specific Powder Free Class 10 Latex Gloves.

- Textured Surface.

- Class 100 (M3.5) Clean Room Compatible or Higher Controlled Environment.

- Double Chlorinated and Double Bagged.

- 10” and 12” Length, Ambidextrous.

PFXT 101 - 10”

Size: Small

PFXT 201

- 12”

PFXT 102 - 10”

Size: Medium

PFXT 202

- 12”

PFXT 103

- 10”

Size: large

PFXT 203

- 12”

PFXT 104

- 10”

Size: X-Large

PFXT 204

- 12”

LPXT Series -

Smooth or Textured Surface Low Protein and Contact Sensitizers.

Double Chlorinated with tapered, beaded Cuff.

9” and 10” Length, Ambidextrous.

Qualified for Use in the Pharmaceutical Industry.

LPXT 100

Size: XS

LPXT 102

Size: M

LPXT 101

Size: S

LPXT 103

Size: L

- 10” Long

- 10 Boxes / Case

LPXT 104

Size: XL

- 100 Gloves / Box

SGPF Series -

Textured Surface; Low Protein & Contact Sensitizers.

Double Chlorinated.

Tapered, Beaded Cuff; Lot Traceable.

Folded Cuff for Aseptic Donning; Hand Specific.

SGPF 600

Size: 6.0

SGPF 750

Size: 7.5

SGPF 900

Size: 9.0

SGPF 650

Size: 6.5

SGPF 800

Size: 8.0

SGPF 1000

Size: 10.0

SGPF 700

Size: 7.0

SGPF 850

Size: 8.5

- 200 pairs / Case

- Textured

- 12” Length

PH: 1-800-932-0309 || FAX: 770-932-0809 || www.ultrapuretechnology.com

Nitrile Gloves Nitrilite Series - Nitrilite gloves solve many of the contamination problems caused by vinyl and natural rubber latex gloves in today’s cleanrooms.

- Designed specifically for critical environments, Nitrilite gloves offer significantly reduced particulate and extractable levels.

- They are 100% powder-free and contain no plasticizers, silicone, or pigments.

- Available in Nitrilite, Nitrilite Silky and Nitrilite Silky Ultra Clean 5 mil, 12” length, powder-free ambi, beaded cuff, textured fingers.

- Available in sizes: XS - XL.

93-311

Nitrilite

100/bag, 10 bags/case

93-401

Nitrilite Silky

100/bag, 10 bags/case

93-402

Nitrilite Silky Ultra Clean

100/bag, 10 bags/case

DermaSheild - DermaShield, made from a proprietary poly-chloroprene blend, is free of latex proteins and accelerators. It is the ideal choice in the prevention of both Type I and Type IV allergies while still providing the softness and flexibility of natural rubber latex gloves.

- In addition, DermaShield allows for easy double donning, is highly resistant to punctures and a broad spectrum of chemicals.

- Powder-free, poly-chloroprene blend.

- Hand-specific.

73-701

DermaSheild

200 pairs / case

NCP & NWCP Series - 5.0 mil Nitrile Co-Polymer Powder Free Class 100 Gloves.

- No Latex Proteins; White Color, Super Soft Feel; Anti-Static; Double Bagged Textured for Critical Handling; Tapered, Beaded Cuff; 12” Length, Ambidextrous.

- NWCP Series offers Class 10 compatibility with DI water laundering process.

NCP 201 - NWCP 201

Size: Small

100/bag, 10 bags/case

NCP 202 - NWCP 202

Size: Medium

100/bag, 10 bags/case

NCP 203 - NWCP 203

Size: Large

100/bag, 10 bags/case

NCP 204 - NWCP 204

Size: X-Large

100/bag, 10 bags/case

NCP 205 - NWCP 205

Size: XX-Large

100/bag, 10 bags/case

Nitrile Sterile Powder Free Class 100 Gloves - 100% Nitrile; Class 100 (M3.5) Compatible or Higher; Controlled Environments.

- Bisque Finish; Tapered, Beaded Cuff; No Latex Proteins; Lot Traceable Sterility.

- Folded Cuff for Aseptic Donning; Superior Strength and Puncture Resistance.

- 12” Length, Hand Specific; Gamma Irradiated Sterilization Minimum Dose 2.5 Mrads.

NGSF600 - NGSF1000

Size:6-10

1 pair / pouch; 200 pairs / case

(half sizes available)

PH: 1-800-932-0309 || FAX: 770-932-0809 || www.ultrapuretechnology.com

Vinyl Gloves Pink Anti-Static Gloves - 12” Pink PVC; 5mil Powder-Free, Bisque Texture, Rolled Cuffs.

- Developed especially for handling static-sensative conponents and are electrostatic-free with +5KV to 0 in less than 2 seconds.

- These gloves meet or exceed requirements for anti-static, electrostatic and triboelectric properties.

- Class 10 Anti-static specs available on request.

96-155

Size: Small

100 / anti static bag; 10 bags / case

96-255

Size: Medium

100 / anti static bag; 10 bags / case

96-355

Size: Large

100 / anti static bag; 10 bags / case

96-455

Size: X-large

100 / anti static bag; 10 bags / case

HDV Type Q -

12” Clear High Density Vinyl.

Powder-Free, Bisque Texture, Class 10/M1.5, Poly bag.

Tear resistant for extended wear.

Nonallergenic, latex free.

Reliable protection for critical environments. packaged 100 gloves per vacuum-sealed poly bag, 1,000 per case.

96-188

Size: Small

100 gloves / bag; 10 bags / case

96-288

Size: Medium

100 gloves / bag; 10 bags / case

96-388

Size: Large

100 gloves / bag; 10 bags / case

96-488

Size: X-large

100 gloves / bag; 10 bags / case

Heavyweight Laboratory Handies - These gloves are extra thick, dramatically resistant to tearing and ruptures without compromising touch-sensitive control.

- Colored Green for easy identification; 9.5” Long.

- Provide excellent dexterity and feel.

- PVC material ideal barrier to most acids and caustics.

- Specially packaged for laboratory use.

96-183

Size: Medium

50 gloves / box; 10 boxes / case

96-283

Size: Large

50 gloves / box; 10 boxes / case

96-383

Size: X-large

50 gloves / box; 10 boxes / case

Silver PE Chemshield -

14” Blue/Silver, 3.5mil Polyethylene.

Ultra Clean,Additive Free, Class 10.

Highly Chemical Resistive.

Silver polyethelyne offers widest range of chemical protection.

Tough and resists cuts, punctures and abrasion.

92-270

Size: Medium

50 gloves / box; 10 boxes / case

92-370

Size: Large

50 gloves / box; 10 boxes / case

92-470

Size: X-large

50 gloves / box; 10 boxes / case

PH: 1-800-932-0309 || FAX: 770-932-0809 || www.ultrapuretechnology.com

Chemical Gloves Solvex Sol-Vex gloves are made of a high-performance nitrile compound which provides an outstanding combination of strength and chemical resistance.

Won’t swell, weaken, or degrade, and they offer better protection against snags, punctures, abrasions, and cuts. Component materials comply with FDA regulations for food contact.

37-145 37-155 37-175 37-185

(13” 11 mil.)

Size: 6, 7, 8, 9, 10, 11

12 dz. pr. / case

(13” 15 mil.)

Size: 7, 8, 9, 10, 11

12 dz. pr. / case

(13” 15 mil.) - Soft Lined

Size: 6, 7, 8, 9, 10, 11

12 dz. pr. / case

(18” 22 mil.)

Size: 7, 8, 9, 10, 11

12 pr. / case

Neoprene Neoprene gloves offer broad-spectrum protection, with excellent resistance to a wide range of chemicals, including oils, acids, caustics, and solvents.

The gloves are case hardened to increase chemical and abrasion resistance over ordinary neoprene gloves. Also good for handling oils, acids, caustics, alcohols, and solvents.

29-845

(12” 17 mil.)

Size: 7-7.5, 8-8.5, 9-9.5, 10, 11

12 dz. pr. / case

Canners & Handlers RBC Unsupported, Unlined, Medium-Duty, Natural Rubber Latex, Rolled Beaded Cuff.

These gloves are 20 mil. thick for good chemical, snag, puncture, abrasion, and cut resistance, plus they feature a diamond-embossed grip for added grip and a rolled beaded cuff for increased strength and protection from chemical droplets.

343

(12” 20 mil.)

Size: 7, 8, 9. 10

12 dz. pr. / case

Alpha Tec The AlphaTEC glove features the revolutionary Ansell Grip Technology™ which greatly increases control and comfort while significantly reducing fatigue and CTS-related injuries.

Our patent- pending nitrile layer is filled with microscopic channels that actively repel oils and other lubricants, giving you nearly the same grip you would have in fluid-free conditions.

58-530

(12”)

Size: 8, 9. 10, 11

72 pr. / case

Barrier Barrier gloves feature a unique non-woven liner that absorbs perspiration and makes the gloves comfortable to wear, especially for extended periods.

Proprietary seam-fusion technology provides a secure seal against chemicals and also assures a flexible comfortable fit for greater dexterity and reduced hand fatigue.

2-100

(2.5 mil.)

Size: 6, 7, 8, 9. 10, 11

6 dz. pr. / case

PH: 1-800-932-0309 || FAX: 770-932-0809 || www.ultrapuretechnology.com

Coated Gloves Hy-Flex Foam HyFlex Foam’s knit liner and original foam nitrile coating combine to give workers near-bare-hand comfort and dexterity.

Foam nitrile coating helps reduce hand fatigue while providing maximum comfort and dexterity and channeling away oil from the surface of the gloves, providing a sure grip in light oil applications.

11-800

Size: 6, 7, 8, 9, 10, 11

12 dozen pair / case

Hy-Flex NBR Nitrile coating repels oil and provides excellent abrasion resistance. Nex “X” design formers offer ergonomical fit with additional protection for the back of the hand.

NBR gloves have excellent dry grip for applications involving small-to-medium-sized parts. Nitrile, traditional palm-dipped, fine gauge knit liner.

11-900

Size: 6, 7, 8, 9, 10

12 dozen pair / case

Hy-Flex CR Stretch Kevlar liner provides excellent cut resistance and comfortable fit. Excellent protection from nuisance nicks and abrasion. Soil-hiding black palm coating. Extended cuff offers extra cut protection around the wrist.

Foam nitrile coating channels away oil from the surface of the gloves, providing a sure grip in light oil applications.

11-500

Size: 6, 7, 8, 9, 10, 11

12 dozen pair / case

Hy-Flex Lite HyFlex Lite offers the most tactile sensitivity and dexterity you can get in an ultra-lightweight assembly glove. Ultra-cool stretch nylon liner and polyurethane coating offer unmatched tactile sensitivity. Available in palm-dipped style for added protection or finger-dipped style for maximum tactile sensitivity.

Ideal for the electronics industry where dexterity is the key factor.

11-600

Size: 6, 7, 8, 9, 10, 11

12 dozen pair / case

CT-180 Nitrile Rubber, Aerated Palm Coating, over-edge or hem binding.

Provides the absolute best fit for optimum feel, comfort and functionality. Withstands abrasions, cuts, snags, while providing superior grip.

Breathes and is cool and comfortable to wear increasing productivity.

MK1806-18011

Size: XS - XXLarge

12 pr / polybag, 12 bags / cs.

144 prs / cs.

PH: 1-800-932-0309 || FAX: 770-932-0809 || www.ultrapuretechnology.com

Inspection Gloves Cotton Lisle Inspection Gloves The PIP 500 Series Lisle Gloves are Constructed in a Two Piece, Reversible Pattern Using 100% Cotton Fabric Unless Noted.

Various Lengths: Standard 9”, 10 1/2”, 12” or 14”.

Unhemmed or Overcast Hem to Reduce Lint.

97-500

Lightweight, Unhemmed

Dozen / pack

97-501

Lightweight, Unhemmed, Ladies

Dozen / pack

97-520

Mediumweight, Unhemmed

Dozen / pack

97-540

Heavyweight, Unhemmed

Dozen / pack

Cut & Sewn Nylon/Polyester Inspection Gloves Nylon Fabric Absorbs Perspiration and Keeps Hands Comfortable.

Stretch Fabric Patterns are Available in 9” or 12” Lengths.

Stretch Nylon Fabric Styles available in two piece or ambidextrous patterns.

40 Denier Tricot Fabric Styles are Available in Two Piece Pattern or in Heavier Weight Fabric.

98-700 98-701 98-404

Stretch Nylon, Full Fashion Pattern.

Dozen / pack “Zig Zag” Stitched Rolled Hem, Heavy Weight.

Stretch Nylon, Full Fashion Pattern “Zig Zag” Stitched Rolled Hem, Heavy Weight Ladies. Dozen / pack Stretch Polyester, Full Fashion Pattern.

Dozen / pack Overcast Hem with Elastic, Extra Long Length.

Seamless Knit Nylon Seamless Construction Provides Comfort and Reduces Hand Fatigue.

Low Lint Gloves Knit from Nylon Filament Yarns.

Provides Superior Comfort & Dexterity.

Nylon Yarns Absorb Perspiration, leaving Hands Cool and Comfortable.

40-C125

N-Spector XRT, Urethane Coated

Dozen / pack

40-730

13 Gauge, Light Weight

Dozen / pack

40-732

Fingerless, 13 Gauge, Medium Weight

Dozen / pack

99-126

Cleanteam Parts Handler, Coated

Dozen / pack

BCR Polyester Glove Liners BCR Glove Liners are the ideal choice in any industry when the job 100% continuous filament, knitted polyester.

Constructed using special seamless techniques; Ambidextrous for easy stock control.

BGL2.20R

Full Finger Glove Liner

10 pairs / pack 20 packs / case

BGL2.200BR

Full Finger Glove Liner

200 pairs / pack; 1 pack / case

BGL3.20R

Full Finger Glove Liner

10 pairs / pack 20 packs / case

BGL3.20L

Full Finger Glove Liner

10 pairs / pack 20 packs / case

PH: 1-800-932-0309 || FAX: 770-932-0809 || www.ultrapuretechnology.com

Finger Cots FW01 Excessive powder has been removed by a mechanical tumbling process. for use in situations where particles are not so critical, but product protection from skin oils, salt and perspiration is essential. 10 gross to a polybag, 20 polybags per case (200 gross/case).

- Mechanically Cleaned, Low Powder Finger Cots.

- Color: White.

Small Medium Medium/Large X-Large

10 10 10 10

gross gross gross gross

/ / / /

Bag Bag Bag Bag

FW04 Average surface resistivity is 10/sq.and average decay charge rate is <2 seconds. For use with CLASS 2/CATEGORY B static sensitive device with a threshold sensitivity above 1000V, packaged in an electro-static shield bag for more protection from static charges.

5 gross to a polybag. 40 polybags per case(200 gross/case).

- Antistatic Powder Free, Class 100 Finger Cots.

- Color: Pink.

Small Medium Medium/Large X-Large

5 5 5 5

gross gross gross gross

/ / / /

Bag Bag Bag Bag

FY01 Processed by advanced chlorination washing to minimize contamination both inside and outside. Inspected and packaged under class 100 specifications. 10 gross to a polybag, 20 polybags per case(200 gross/case).

- Powder free, Class 100 finger Cots.

- Color: Ember.

Small Medium Medium/Large X-Large

10 10 10 10

gross gross gross gross

/ / / /

Bag Bag Bag Bag

FB01 Excellent tactics sensitivity for static free handling of ESD parts and components, 2x 10/sq. Average surface resistivity allows rapid bleed off of any charge. For use with CLASS Ă&#x152;/CATEGORY A(<1000V) static sensitive electronic devices. Packed in an electro-static bag for more protection from static charge. 5 gross to a polybag, 40 polybags per case (200 gross/case).

- Static Dissipative Finger Cots.

- Color: Black.

Small Medium Medium/Large X-Large

10

5 5 5 5

gross gross gross gross

/ / / /

Bag Bag Bag Bag

PH: 1-800-932-0309 || FAX: 770-932-0809 || www.ultrapuretechnology.com

Disposable Apparel Beard Cover -

White, non-woven.

21â&#x20AC;? Beard Cover.

100/dispenser, 5 dispensers/case.

Provides maximum coverage of beards, moustaches, etc.

Part # 67-230

Spunbonded Polypropylene Bouffant Caps - Strong and Durable.

- Contamination Control.

- Lightweight Material Offers Comfort and Breathability, while maintaining Snug Full Coverage.

- Individually Inspected for Stitching, Sizing, Material and Workmanship.

- Lot Traceability.

- Bouffant: Flat Packed 100/Bag, 5 Bags/Case (500 pieces/case) - Available in white or blue.

- Part # NBC 240

Compressed Polypropylene Shoecovers -

Effectively contains dirt and moisture with seamless bottoms.

Better grip with heavy texture.

Non-toxic and odorless.

16â&#x20AC;?, white.

100 pieces/bag, 3 bags/case.

Part #SC-CPE 12L.0

Poly Latex Shoecovers -

Strong and Durable.

Comfortable Fit. Non-Skid.

Impervious to liquids.

Individually Inspected for Seal, Sizing, Material and Workmanship.

- Lot Traceable.

- Poly Bagged Flat Packed, 100/Bag, 3 Bags/Case, 150 Pairs/Case.

- Part # SCPL 150

Nonconductive Shoecovers -

Size: Universal.

Polypropylene material.

Color: Blue.

300/case, 300/box, bulk packed.

- Part # 42-134 - Part # 42-138 - Part # 42-137 - Part # 42-131

(Universal) (X-Large) (Universal Gripper) (X-Large Gripper)

PH: 1-800-932-0309 || FAX: 770-932-0809 || www.ultrapuretechnology.com

11

Cleanroom Apparel ProClean Coverall

Coverall

Serged seam White coverall with bound neck, front zipper closure, tunneled elastic wrists, ankles and waist. clean.

25/cs.

PC143S OC

SM-4X

Serged seam, white coverall, attached hood, tunneled elastic face opening, adjustable snap closure at chin, front zipper closure, tunneled elastic wrists, ankles and waist, attached socks. clean. 25/cs.

PC122S OC

MD-4X

Frock

Frock Serged seam white frock with bound neck five snap front, tunneled elastic wrists, full length. clean.

30/cs.

PC270S OC

SM-4X

Isolation Gown Serged seam white isolation gown with bound edges, snap closure at neck, open back, tunneled elastic back opening, tunneled elastic wrists, waist ties. clean. 30/cs.

PC701S OC

Serged seam, white frock with bound neck, front zipper closure, tunneled elastic wrists, full-length. bulk packed. 30 pr/cs.

PC271S OB

SM-4X

Sleeve Protector Serged Seams, Tunneled elastic openings, 18â&#x20AC;? length, universal sizing. clean. 100 pr/cs.

PC500S OC

MD-4X

Boot Cover

Hood

Serged seam, white bootcover with tunneled elastic tops, elastic ankles, PVC sole, 20â&#x20AC;? high. clean.

50 pr/cs.

Serged seams, white hood, open face and bound opening, shoulder length, side ties, no elastic, universal sizing. clean. 100/cs.

PC444S OC

SM-XL

PC663S OC

DuPont ProClean has a unique breathable composite for critical environments that provides excellent liquid and particle barrier. Chemically and biologically inert. Offers light splash protection against many liquids. Low linting, static-free, Color: White, Seams: Serged.

12

PH: 1-800-932-0309 || FAX: 770-932-0809 || www.ultrapuretechnology.com

Cleanroom Apparel Tyvek & New ProShield Coverall

Coverall

Serged seam White coverall with collar, front zipper closure. 25/cs.

Serged seam White coverall with attached hood, front zipper closure, elastic wrists and ankles. 25/cs.

TY120S

TY127S

SM-4X

Coverall Serged seam White coverall with attached hood, front zipper closure, elastic wrists and ankles, attached skid-resistant boots.

25/cs.

TY122S

SM-4X

Bouffant Hat White 21” bouffant hat with elastic. 30/cs.

SM-4X

Labcoat Serged seam, white labcoat, collar, front snap closure, two pockets. 30 pr/cs.

TY212S

Coverall Coverall with zip front, attached hood & boots. Elastic at hood, back waist, wrists. Anti-static treated. Light Blue or White. 25/cs.

P1150S

TY667S

Coverall

Labcoat

Serged seam White coverall with collar, front zipper closure, elastic waist, wrist and ankles.

25/cs.

Serged seam. Light Blue or White anti-static treated labcoat with two pockets, one on the top left and one on the lower right side; 5 snaps in front. 30/cs.

P1132S1

P1212S2

OC = Clean

OO or OB = Bulk packaged

Pro Shield: a breathable, lightweight fabric that gives you a barrier against nonhazardous dry particles. DuPont™ ProShield®, is the first choice when you’re looking for value and comfort. ProShield® not only provides a barrier against dry particles and the utmost in comfort. Softness and breathablity, applied to a roomy garment design, with an elastic waist and storm flap provide a greater range of mobility.

PH: 1-800-932-0309 || FAX: 770-932-0809 || www.ultrapuretechnology.com

13

Cleanroom Apparel Suprel LS Coverall

Frock

Serged seam white coverall with front zipper closure, drawstring hood, elastic wrists and ankles. Bulk packed.

25/cs.

SR127S OO

SM-4X

SM-4X

SM-4X

Serged seam white labcoat with 6 snap front, full length with 3 pockets, knit cuffs and collar. bulk packed. 30/cs.

SR219S OO

SM-4X

Serged seam white shoecovers with elastic ankle and gripper sole. bulk packed. 100/cs.

SR442S OO

M,L,XL

Hood

Coverall Serged seam white coverall with front zipper closure, laydown collar, elastic wrists and ankles. Bulk packed.

25/cs.

SR181S OO

SM-4X

Shoe Cover

Coverall Serged seam white coverall with front zipper closure, elastic hood, elastic wrists and ankles. Bulk packed.

25/cs.

SR180S OO

SR267S OO

Labcoat

Coverall Serged seam white coverall with front zipper closure, mandarin collar, elastic wrists and ankles. Bulk packed.

25/cs.

SR148S OO

Serged seam white frock with 5 snap front, mandarin collar, elastic wrists, no pockets. bulk packed. 30/cs.

SM-4X

OS = Sterile

Bound seam white full face hood with safety stitch construction with ties, sterile. 100/cs.

SR663B OS

OO or OB = Bulk packaged

DuPont™ Suprel® LS offers a unique balance of breathability and barrier protection combined with a softer feel and increased comfort. Based on DuPont Advanced Composite Technology, Suprel® LS is a patented bi-component fabric that presents a better balance of properties compared to microporous film (MF), spun-bonded polypropylene (SBPP) and SMS/SMMS garments. A softer feel and increased comfort.

14

PH: 1-800-932-0309 || FAX: 770-932-0809 || www.ultrapuretechnology.com

Cleanroom Apparel Tyvek-Iso-Clean Coverall

Bootcover

Serged seam white coverall with collar, front zipper closure and open wrists. Bulk packed. 25/cs.

Bound seam, white boot cover, elastic ankles, 20” high tunneled elastic tops, PVC sole. clean and sterile.

100 pr/cs.

IC120S OB

IC441S OB

SM-6X

SM-XL

Shoecovers

Coverall Bound seam white coverall with front zipper closure, raglan sleeves, tunneled elastic wrists and ankles. clean and sterile.

25/cs.

Serged seam, white shoecover, elastic tops, PVC sole. bulk packed. 100 pr/cs.

IC182B CS

IC441S OB

SM-4X

Sleeve Protector

Frock Bound seam white Frock with bound neck with adjustable snaps, 5 snap front, tunneled elastic. clean. 30/cs.

IC270B OC

SM-XL

SM-3X

Bound Seams, Tunneled elastic openings, 18” length, universal sizing. clean and sterile. 100 pr/cs.

IC500B CS

Hood

Labcoat Serged seam, white labcoat with collar, three snap front, open wrists, two pockets. bulk packed. 30/cs.

Bound seam, white hood, eyes only opening, pulls over head, adjustment snaps in back. clean and sterile. 100/cs.

IC220S OO

IC666B CS

CS = Clean and Sterile

SM-2X OC = Clean

MD-LG

OO or OB = Bulk packaged

Tyvek® Iso-Clean fabrics are noted for their superior particulate barrier and ability to resist the passage of micororganisms. Excellent durability and has been a leader in traditional disposable cleanroom apparel. DuPont Cleanroom garments are lightweight, strong and durable and can be readily sterilized to eliminate cross-contamination.

Cleaned garments are processed and packaged in a certified Class 10 cleanroom laundry.

Sterile garments are packaged with “Certificates of Irradiation and Sterility”.

PH: 1-800-932-0309 || FAX: 770-932-0809 || www.ultrapuretechnology.com

15

Face Masks Mask

7” Blue polypropylene outer facing, ear loops, 50/box, 300/cs.

ML736 OS

ML733 BB

Tape Anti-Fog Mask

Cleanroom Face Veil

7” White rayon outer facing, ties. Sterile.

250/cs.

Stainless steel snaps, metal nose piece.

50/bag, 150/cs.

ML730 OS

PP740 BH

Tape Anti-Fog Mask

Cleanroom Face Veil

9” White rayon outer facing, tyvek ties. Sterile.

250/cs.

Elastic headband, metal nose piece.

50/bag, 150/cs.

ML737 OS

PP741 BH

Secure-Gard Blue surgical tie mask, latex free. cellulose inner and outer. 300/cs.

AT7505

Breathable Mask

16

Floor Mask

9” White rayon outer facing, tyvek ties.

Sterile. 250/cs.

Secure-Gard Blue procedure earloop mask, polypropylene inner and outer facing, latex free. 300/cs.

AT7511

Micro-Clean

Highly breathable earloop maskwith fog-free strip, latex free, fully enclosed nosepiece.

300/cs.

Blue micro-clean earloop mask, apertured film outer facing/ polyester inner facing/ tyvek ties. 50/polybag, 300/cs.

AT81371

ATH-91051

PH: 1-800-932-0309 || FAX: 770-932-0809 || www.ultrapuretechnology.com

Stationery TX 5820 - TexWrite TexNotes -

72 sheets/pad Blue TexWrite 22 10 pads/box 3” x 4” (76mm x 102mm) Blue TexWrite 22 cleanroom bond Proprietary, temporary adhesive 3” x 4” (76mm x 102mm) Cleanroom packaged Ultraclean with low particle and fiber generation Low residue, removable adhesive Low ionic contamination

TX 5835 - TexWrite Clipboard -

Rigid polypropylene construction Chemical resistant Suitable for use with 8.5” x 11” or A4 paper Securely holds 1–50 sheets of cleanroom paper Rounded corners Cleanroom packaged Corrosion-resistant, durable construction Rigid back allows use while standing No sharp edges to damage gloves or garments

TX 5741 & TX 5812 TexWrite Cleanroom Lab Notebook - TexWrite 22# cleanroom bond.

- 8.5” x 11”.

- Blue or white college-ruled notebooks.

- 96 individually numbered pages.

- Dual signature and date lines.

- Mylar-sealed cover.

- Supports Good Laboratory (GPl) for documentation.

- Cleanroom packaged.

- Ultraclean with low particle and fiber generation.

- Provides legal foundation.

- Durable binding for long life.

- Chemical-resistant cover material.

- Fully indexed for easy data retrieval.

Cleanroom Copymachine / Computer Printout Paper -

Various Sizes available.

Dual signature and date lines.

Mylar-sealed cover.

Cleanroom packaged.

Ultraclean with low particle and fiber generation.

Provides legal foundation.

Chemical-resistant cover material.

Fully indexed for easy data retrieval.

B76.0811.10

BCR Bond 760 White (8.5” x 11”)

PBL70

Blue Cleanroom Paper (8.5” x 11”)

TX 5832

TexWrite 30 White (8.5” x 11”)

250 shts/pk, 10 pks/cs.

250 shts/pk, 10 pks/cs.

250 shts/pk, 7 pks/cs.

PH: 1-800-932-0309 || FAX: 770-932-0809 || www.ultrapuretechnology.com

17

Cleanroom Wipers ISO Class 3-4 3-4 TEXWIPE - VECTRA WIPES -

Knitted Polyester with sealed borders for critical environments.

100% Continuous filament double knit provides abrasion resistance.

Ions and Extratables consistent with ISO Class 3 Cleanrooms.

Vectra Process with robotic stacking and machine vision inspection.

TX 1029: 9” x 9”

TX 1050:

9” x 9”

Vectra Premium Polyester 100 wipers / bag; 10 bags / case

Vectra Aphasorb 10 100 wipers / bag; 10 bags / case

TX 1060: 9” x 9”

TX 2450: 9” x 9”

Vectra HoneyComb 10

100 wipers / bag; 10 bags / case

Vectra Alphasorb 10 HS 100 wipers / bag; 10 bags / case

BERKSHIRE - VALUE SEAL HA, 1500, LP - ValuSeal-HA is a highly absorbent, ultrasonic heat sealed edge, 100% polyester wiper designed to address specific absorbency con cerns, purity levels, and strength and durability for the semiconductor and biomedical markets.

VSHA.0909.8: 9” x 9”

VSHA.1212.14: 12” x 12”

Value Seal HA

150 wipers / bag; 8 bags / case

Value Seal HA 75 wipers / bag; 14 bags / case

VS1500.0909.8: 9” x 9”

Value Seal 1500

150 wipers / bag; 8 bags / case

VS1500.1212.14: 12” x 12” Value Seal 1500 75 wipers / bag; 14 bags / case

LYMTECH - EXTREME CLEAN - All are constructed using 100% continuous filament polyester knit.

- Feature sealed edges using a proprietary one step laser cutting and sealing process.

- The pinsonic grade is a bonded two-ply textured wipe that provides added absorption retention and entrapment.

7-XCPL-99U-00: 9” x 9”

Extreme Clean Lite

150 wipers / bag; 10 bags / case

7-XCPH-99U-00: 9” x 9” Extreme Clean Heavy

150 wipers / bag; 8 bags / case

7-XCPL-1212U-00: 12” x 12” Extreme Clean Lite 100 wipers / bag; 10 bags / case

7-XCPH-1212U-00: 12” x 12” Extreme Clean Heavy 100 wipers / bag; 8 bags / case

BERKSHIRE - MICRO SEAL & ULTRA SEAL - Ideal for use in critical environments for spill control, equipment cleaning and general clean up.

- 100% knit polyester with sealed edge, Laundered and packed in an ISO 4 cleanroom.

18

MS1200.0404B.10

MS1200.0909.8

MicroSeal 1200 600 wipers / bag; 10 bags / case

MicroSeal 1200 100 wipers / bag; 8 bags / case

MS3000.0909.8

US3000.0909.8

MicroSeal 3000 100 wipers / bag; 8 bags / case

UltraSeal 3000 100 wipers / bag; 8 bags / case

PH: 1-800-932-0309 || FAX: 770-932-0809 || www.ultrapuretechnology.com

Cleanroom Wipers ISO Class 5-7 3-4 TEXWIPE - ALPHA WIPES -

Highly Adsorbent polyester wipers for critical environments.

Cleanroom laundered and packaged.

Suitable for ISO Class 5-6 Cleanrooms.

Hyrdrophilic for absorbing or cleaning with aqueous solutions.

TX 1004:

4” x 4”

TX 1009:

9” x 9”

Alphawipe 300 wipers / bag; 20 bags / case

Alphawipe 150 wipers / bag; 10 bags / case

TX 1012:

TX 1013: 12” x 12”

12” x 12”

Alpha 10 Wipe

100 wipers / bag; 10 bags / case

Alphawipe 75 wipers / bag; 10 bags / case

BERKSHIRE - POLX & SUPER POLX WIPES -

100% Continous filament polyester.

Engineered low ion and chemical resistant.

Absorbs three times its weight, Durable for abrasive wiping.

Engineered finishing process increases absorbency.

P1200.0909.8: 9” x 9”

P1200.1212.14: 12” x 12”

Polx 1200

150 wipers / bag; 8 bags / case

S1200.0909.8: 9” x 9”

Polx 1200 75 wipers / bag; 14 bags / case

S1200.1212.14: 12” x 12”

Super Polx 1200 150 wipers / bag; 8 bags / case

Super Polx 1200 75 wipers / bag; 14 bags / case

LYMTECH - PURITY WIPES -

Comprised of 100% continuous filament polyester fiber.

The knit construction developed to ensure cleaning performance.

Extremely low in particle generation and soluble extractables.

Laundered in ultra filtered water of 0.20 µ purity.

7-7220-99U-00: 9” x 9”

7-7220-1212U-00: 12” x 12”

Purity Wipe Standard Weight 150 wipers / bag; 8 bags / case

Purity Wipe Standard Weight 100 wipers / bag; 6 bags / case

7-7225-99U-00: 9” x 9”

7-7225-1212U-00: 12” x 12”

Purity Wipe Heavy Weight

150 wipers / bag; 5 bags / case

Purity Wipe Heavy Weight 100 wipers / bag; 4 bags / case

TEXWIPE - ALPHASORB WIPES - Hyrdroentangled polyester wipers for optical applications.

- Nonabrasive cleaning and handling of delicate optical components.

TX 404: 4” x 4”

TX 409: 9” x 9”

Absorbond 1,200 wipers / bag; 10 bags / case

Absorbond 300 wipers / bag; 10 bags / case

TX 1052: 12” x 12”

Alphasorb 10

100 wipers / bag; 10 bags / case

TX 2412: 12” x 12” Alphasorb HC 100 wipers / bag; 6 bags / case

PH: 1-800-932-0309 || FAX: 770-932-0809 || www.ultrapuretechnology.com

19

Cleanroom Wipers ISO Class 5-73-4 TEXWIPE - TECHNICLOTH WIPES - Hyrdroentangled nonwoven 55% cellulose and 45% polyester blend combines the highly absorbent properties of a natural fiber with the cleanliness, strength and durability of a synthetic wiper.

TX 604: 4” x 4”

TX 1109: 9” x 9”

Technicloth

1,200 wipers / bag; 10 bags / case

Technicloth II 300 wipers / bag; 10 bags / case

TX 609: 9” x 9”

TX 1112: 12” x 12”

Technicloth

300 wipers / bag; 10 bags / case

Technicloth II 150 wipers / bag; 10 bags / case

BERKSHIRE - DURX 670 & 770 WIPERS -

Hydroentangled 55% cellulose/45% polyester.

Low fiber and particle generation.

Synthetic polyester strength of cellulose Soft, highly sorbent and durable.

DR670.0404.8: 9” x 9”

DR770.0404.10: 4” x 4”

Durx 670

1,200 wipers / bag; 10 bags / case

Durx 770 1,200 wipers / bag; 10 bags / case

DR670.0909.20: 9” x 9”

DR770.0909.20: 9” x 9”

Durx 670

300 wipers / bag; 20 bags / case

Durx 770 300 wipers / bag; 20 bags / case

ULTRAPURE® - C-WIPES -

Ultra-low tendency to generate particles.

C1 is made of a super absorbent blend of cellulose and polyester.

C30 has no chemical binders.

C3 Has 100% hydroentangled polyester fibers. especially smooth, soft, and non-abrasive.

7-C1(3,30)44U-00

7-C1(3,30)99U-00

4” x 4” 1,200 Wipers / bag; 10 bags / case

9” x 9” 150 Wipers / bag; 24 bags / case

7-C1(3,30)1212U-00 12” x 12” 75 Wipers / bag; 36 wipers / bag

TEXWIPE - MIRACLE WIPES -

Highly absorbent Nylon wipers Nylon fabric provides excellent strength, elasticity & durability.

Ultralow levels of particles and extractables.

Best abrasion resistance under rigorous use on rough surfaces.

TX 4004:

20

4” x 4”

TX 4009: 9” x 9”

600 wipers / bag; 8 bags / case

150 wipers / bag; 8 bags / case

TX 4012: 10” x 12”

TX 4018: 14” x 18”

200 wipers / bag; 4 bags / case

100 wipers / bag; 4 bags / case

PH: 1-800-932-0309 || FAX: 770-932-0809 || www.ultrapuretechnology.com

Cleanroom Wipers Specialty Wipers 3-4 TEXWIPE - BETA & FoamWipe - Thermally bonded, polypropylene and cellulose wiper.

- The Beta wipe has a mildly abrasive surface texture.

- FoamWipe is an Open-cell polyurethane wiper with excellent solvent capacity.

TX 2009: 9” x 9”

TX 704: 6” x 9” x 1/8”

BetaWipe

100 wipers / bag; 10 bags / case

FoamWipe 60 wipers / bag; 8 bags / case

COTTON WIPES - TEXWIPES / TJ WIPES - Cotton wipers with tight-weave construction and bias cut to enhance effectiveness.

- Strong, double sided, twill pattern cotton wipers.

- Durable, highly absorbent and heat resistant, (autoclavable).

TX 304:

4” x 4”

7-TJ44U-00: 4” x 4”

1,200 wipers / bag; 10 bags / case

1,200 wipers / bag; 12 bags / case

TX 306: 6” x 6”

7-TJ66U-00: 6” x 6”

600 wipers / bag; 10 bags / case

600 wipers / bag; 10 bags / case

TX 309: 9” x 9”

7-TJ99U-00: 9” x 9”

300 wipers / bag; 10 bags / case

300 wipers / bag; 12 bags / case

TX 312: 12” x 12”

7-TJ1212U-00: 12” x 12”

75 wipers / bag; 10 bags / case

150 wipers / bag; 10 bags / case

INSPECTION WIPES - BLUE SORB & BLUE WIPE - Hydroentangled 55% cellulose/45% polyester, colorfast blue which allows for segregating by critical environment process.

- Synthetic polyester strength with absorbent characteristics of cellulose.

BS750.0909.20 9” x 9”

300 wipers / bag; 20 bags / case

TX 512 12” x 12” 50 wipers / bag; 10 bags / case

BERKSHIRE - LABX123 & LABX 170 - 100% natural abaca fiber for the Labx123 and 80% natural abaca fiber for the Labx170.

- Meets A-A-50177, Type 1, Class 5 for Light Weight, Wet Strength Lens.

- Engineered as lightweight low lint tissue grade, Highly absorbent.

LABX123.0707.63: 7” x 7”

LABX170.0707.81: 7” x 7”

1000 / bag; 63 bags /case

500 / bag; 81 bags / case

LABX123.00909.60: 9” x 9”

LABX170.0909.40: 9” x 9”

500 / bag; 60 bags / case

500 / bag; 40 bags / case

LABX123.1212.30: 12” x 12”

LABX170.1212.30: 12” x 12”

500 / bag; 30 bags / case

500 / bag; 30 bags / case

PH: 1-800-932-0309 || FAX: 770-932-0809 || www.ultrapuretechnology.com

21

Cleanroom Wipers Sterile Wipers 3-4 TEXWIPE - Sterile Wipe AS 10 - High-sorbency performance in a sealed border wiper.

- Large wiper size and liquid cpacity simplify the application of large volumes of solutions.

- Optimal combination of absorbency and abrasion resistance.

TX 3215: 12” x 12” 100 wipers / bag 5 bags / case

TEXWIPE - Sterile Wipe LP & LP 10 - Sterile, knitted polyester wiper with sealed-borders.

- 100% continuous filament cleanroom laundered wiper.

- Compatible with ISO Class 5 Cleanroom Envrionments.

TX 3212: 12” x 12” 100 wipers / bag 5 bags / case

TX 3211: 9” x 9” 100 wipers / bag 5 bags / case

TEXWIPE - Sterile Wipe HS II - Absorbent, Sterile Cellulose / Polyester Blend Wiper.

- Hydroentangled, nonwoven blend of 55 % Cellulose and 45% polyester.

- Low Particle Counts, low extractable levels and good solvent com patibility.

TX 3210: 12” x 12” 100 wipers / bag 5 bags / case

LYMTECH - C1 Sterile - Lymtech’s Validated Sterile Wipe is gamma irradiated with Cobalt-60 to a sterility assurance level of 10-6.

- Linear-tear packaging is designed with ease of use with gloved hand.

7-C1VS-99P-01: 9” x 9”

25 wipers / bag, 6 bags / pack 10 packs / case

7-C1VS-BBP-00: 12” x 12” 25 wipers / bag, 6 bags / pack 3 packs / case

LYMTECH - 7220 Sterile - Each shipment is lot traceable and accompanied by a Certificate of processing and a certificate of Sterility.

- linear-tear packaging is designed with ease of use with gloved hand.

7-7220VS-99P-01: 9” x 9”

7-7220VS-BBP-00: 12” x 12”

20 wipers / bag, 6 bags / pack 6 packs / case

20 wipers / bag, 6 bags / pack 6 packs / case

* Each of the above shipments are lot traceable and accompanied by a Certificate of processing and a Certificate of Sterility.

22

PH: 1-800-932-0309 || FAX: 770-932-0809 || www.ultrapuretechnology.com

Cleanroom Wipers PreSaturated Wipers 3-4 TEXWIPE - TechniSat - Hydroentangled polyester / cellulose wipers, no binders or additives.

- Chemically resistant to withstand exposure to cleaning and disinfecting solutions.

- Provide more consistent cleaning than dry wipes and squirt bottles.

Sterile

TX 3214: 9” x 11”

Non-Sterile

50 wipers / flexpack 24 packs / case

TX 1065: 9” x 11” 50 wipers / flexpack 24 packs / case

TEXWIPE - AlphaSat - Absorbent polyester wiper ideal for use in critical environments.

- Superior strength guards against abrasion.

- Packaged in solvent-safe plastic that can be wiped down prior to introduction into the cleanroom.

Sterile

TX 3280: 12” x 12

Non-Sterile

50 wipers / flatpack 5 packs / case

TX 1039: 9” x 9” 50 wipers / bucket 4 buckets / case

TEXWIPE - PolySat - 100% melt-blown Polypropylene wipers pre-wetted with 70% isopropyl alcohol.

- Recommended for ISO Class 7 Cleanroom Environments.

- Suitable for wiping production equipment requiring low solvent extractables and low particle generation.

Sterile

TX 3213: 9” x 11”

Non-Sterile

50 wipers / flexpack 24 packs / case

TX 1051: 9” x 11” 50 wipers / flexpack 24 packs / case

LYMTECH - LYMSAT - 100% Non-woven melt-blown polypropylene, polycellulose and polyester knit.

- Excellent Class 100 compatible wipe where a wet wipe is applicable.

- Pre-saturated wipers with very low levels of sodium and other ions.

Sterile

Non-Sterile

6-LS7030VS-PC: 9” x 9”

6-LS-7030: 9” x 11”

30 wipers / pouch 27 pouches / case

30 wipers / pouch 24 pouches / case

LYMTECH - LYMSAT CANNISTERS - 100% Non-woven melt-blown polypropylene, polycellulose and polyester knit.

- Very low levels of sodium and other ions.

- Significantly reduces exposure to airborne chemicals.

6-LS7030-685: 6” x 8.5” 1 full cannister / 11 refills

PH: 1-800-932-0309 || FAX: 770-932-0809 || www.ultrapuretechnology.com

23

Swabs Small Compressed CleanFoam Swab - CleanFoam swab for cleaning small slotted and grooved areas .

Part No.- TX751B Head Thickness- 3.5 mm (0.138”) Handle Width- 2.4 mm (0.094”) Handle Length- 50 mm (1.969”) Packaging- 500 swabs/bag

Head Width- 4 mm (0.157”) Head Length- 17 mm (0.669”) Handle Thickness- 2.4 mm (0.094”) Total Swab Length- 67 mm (2.638”)

5 inner bags of 100 swabs 5 bags/case

Foam-Covered Cotton Bud - Seamless, highly sorbent cotton/polyurethane swab.

Part No.- TX700B Head Thickness- 13.5 mm (0.531”) Handle Width- 2.2 mm (0.087”) Handle Length- 126 mm (4.961”) Packaging- 500 swabs/bag

Head Width- 14 mm (0.551”) Head Length- 28 mm (1.102”) Handle Thickness- 2.2 mm (0.087”) Total Swab Length- 154 mm (6.063”)

10 inner bags of 50 swabs 5 bags/case

Crush Tube Swab - Point-of-Use IPA-saturated polyester swab.

Part No.- TX726 Head Thickness- 8.3 mm (0.327”) Handle Width- 9.5 mm (0.374”) Handle Length- 40.0 mm (1.575”) Packaging- 50 swabs/box

Head Width- 8.3 mm (0.327”) Head Length- 10.0 mm (0.394”) Handle Thickness- 9.5 mm (0.374”) Total Swab Length- 50.0 mm (1.969”)

1 bag/box 10 boxes/case

Large Flexible Head Swab - Flexible, general-purpose swab for cleaning surfaces and wider recessed areas.

Part No.- TX710A Head Thickness- 5.4 mm (0.213”) Handle Width- 4.3 mm (0.169”) Handle Length- 93 mm (3.661”) Packaging- 100 swabs/bag

24

Head Width- 7 mm (0.276”) Head Length- 21 mm (0.827”) Handle Thickness- 4.3 mm (0.169”) Total Swab Length- 114 mm (4.488”)

2 inner bags of 50 swabs 10 bags/case

PH: 1-800-932-0309 || FAX: 770-932-0809 || www.ultrapuretechnology.com

Swabs

Absorbond Swab with Long Handle - Hydroentangled, polyester swab for cleaning surfaces and hard-to-reach areas.

Part No.- TX762 Head Thickness- 2.6 mm (0.102”) Handle Width- 3.2 mm (0.126”) Handle Length- 145.5 mm (5.728”) Packaging- 100 swabs/bag

Head Width- 7 mm (0.276”) Head Length- 16.8 mm (0.661”) Handle Thickness- 3.2 mm (0.126”) Total Swab Length- 162.3 mm (6.390”)

1 inner bag of 100 swabs 10 bags/case

Rectangular Head Swab - Large, general-purpose swab with longer, narrower head and shorter, thinner handle for cleaning surfaces and hard-to-reach areas.

Part No.- TX712A Head Thickness- 7.8 mm (0.307”) Handle Width- 5.2 mm (0.205”) Handle Length- 101.8 mm (4.008”) Packaging- 100 swabs/bag

Head Width- 13 mm (0.512”) Head Length- 25.7 mm (1.012”) Handle Thickness- 3 mm (0.118”) Total Swab Length- 127.5 mm (5.020”)

2 inner bags of 50 swabs 10 bags/case

Medium CleanFoam Swab with Long Handle - CleanFoam swab for cleaning surfaces and hard-to-reach areas.

Part No.- TX740B Head Thickness- 5 mm (0.197”) Handle Width- 3.2 mm (0.126”) Handle Length- 145 mm (5.709”) Packaging- 500 swabs/bag

Head Width- 6 mm (0.236”) Head Length- 17 mm (0.669”) Handle Thickness- 3.2 mm (0.126”) Total Swab Length- 162 mm (6.378”)

5 inner bags of 100 swabs 5 bags/case

Mini CleanFoam ESD Swab - Cleanest foam, dissipative swab for cleaning small and confined areas.

Part No.- TX753E Head Thickness- 3.4 mm (0.134”) Handle Width- 3 mm (0.118”) Handle Length- 80.7 mm (3.177”) Packaging- 500 swabs/bag

Head Width- 4 mm(0.157”) Head Length- 10 mm (0.394”) Handle Thickness- 3 mm (0.118”) Total Swab Length- 90.7 mm (3.571”)

5 inner bags of 100 swabs 5 bags/case

PH: 1-800-932-0309 || FAX: 770-932-0809 || www.ultrapuretechnology.com

25

Swabs

PurSwab Foam Tipped Applicator - For removing epoxy residue from connectors, General cleaning, Foam tip, Polypropylene shaft.

- Cleaning Applicator (Non-sterile).

Part No.- 1803-PF

Size- 3”

Shaft- Polypropylene

Applications/Characteristics:

For removing epoxy residue from connectors General cleaning Foam tip Polypropylene shaft

Tip- Foam

Tip- Foam

Tip- Foam

Packaging:

50 swabs/bag 20 bags/case 1000 swabs/case

PurSwab Foam Tipped Applicator - General cleaning, Foam tip, Polypropylene shaft.

- Cleaning Applicator (Non-sterile).

Part No.- 1804-PF

Size- 4”

Shaft- Polypropylene Packaging:

Applications/Characteristics:

50 swabs/bag 20 bags/case 1000 swabs/case

General cleaning Foam tip Polypropylene shaft

PurSwab Foam Tipped Applicator - Thermal bond tip.

- Cleaning Applicator (Non-sterile).

Part No.- 1805-PF RECT

Size- 5”

Applications/Characteristics:

Shaft- Polypropylene

General cleaning swab Thermally bonded foam tip reduces contaminates Polypropylene shaft

26

Packaging:

50 swabs/bag 20 bags/case 1000 swabs/case

PH: 1-800-932-0309 || FAX: 770-932-0809 || www.ultrapuretechnology.com

Swabs

PurSwab Anti-Static Foam Tipped Applicator - Anti-static for single use Critical Environment.

- Cleaning Applicator (Non-sterile).

Part No.- 1806-WCF AS

Size- 6”

Shaft- Wood

Tip- Foam Over Cotton

Packaging:

Applications/Characteristics:

50 swabs/bag 20 bags/case 1000 swabs/case

General cleaning Foam tip Polypropylene shaft

Puritan Medical Products Foam Tipped Applicator - Buccal swab, High article collection capacity, Sterile, Round foam tip, Polypropylene shaft.

- Applicator (Sterile).

Part No.- 25-1805 1PF RND

Size- 5”

Shaft- Polypropylene

Tip- Foam

Packaging:

Applications/Characteristics:

50 swabs/bag 20 bags/case 1000 swabs/case

Buccal swab High article collection capacity Sterile Round foam tip Polypropylene shaft

PurSwab Foam Tipped Applicator - Lint-free.

- Applicator (Non-sterile).

Part No.- 876-WC

Size- 6” x 1/10”

Applications/Characteristics:

Applications/Characteristics Cleaning cameras Cleaning situations requiring tear resistance Lintfree Regular cotton tip Wood shaft

Shaft- Wood

Tip- Cotton

Packaging:

100 swabs/bag 10 boxes of 10 bags/case 10,000 swabs/case

PH: 1-800-932-0309 || FAX: 770-932-0809 || www.ultrapuretechnology.com

27

Mats and Flooring FirstStep Contamination Control Mat - Adhesive-coated contamination control mat captures particulates from foot-traffic and equipment wheels before they can get tracked into the cleanroom.

- Antimicrobial - Long-lasting protection against growth of organisms, including mold, mildew, fungi and algae.

- The Antimicrobial is nonleeching and nontoxic.

- Available in white, blue and gray.

- Available sizes: 18 x 36, 18 x 46, 24 x 36, 25 x 45, 36 x 46 & 36 x 60.

Seam Welded Vinyl Flooring - Available in 40 colors.

- homogeneous construction delivers the ultimate in durability, resilience and resistance to static and rolling loads.

- A protective urethane finish offers increased scuff resistance with improved maintainability.

- Solid and patterned weld rods are available to ensure asepsis in required spaces.

- Certified for low VOC (volatile organic compound) emissions.

- 4â&#x20AC;? flash coving for ease of use.

CleanZone Contamination Control mat / Flooring CleanZone is a high performance contamination control mat or floor covering designed to attract, collect and retain viable and non-viable contamination. Installed with easy-in, easy-out self adhesive panels. Suitable for light wheeled traffic and heavier pedestrian flows. Available in a range of mats or floor coverings to suit your facilities needs. Prevents over 99% of contamination from entering your critical area.

- Improved quality of working life due to reduced allergens in the atmosphere.

- Reduced floor and air particle / microbial counts.

- Improved yield, cost savings and profitability.

- Reduced risk of high product rejection rates.

- CleanZone products cannot be bypassed and require no overt action.

Epoxy Flooring Chemically resistant epoxy used to coat concrete, masonry or steel surfaces including floors, walls, equipment, trenches and structural members.

- Exceptional chemical resistance.

- 100% solids performance, with paint-like color, hide and spreadability.

- Full range of colors.

- Can be applied to cool (350F) and damp surfaces, even under water. (longer cure time).

- Self-extinguishing in thin films.

- 100% non-volatile.

Clean Cove - 3â&#x20AC;? Radius coving.

- Eliminating 90-degree corners with CleanCove helps assure that your cGMP facility will be validatable.

- With minimal effort, the three part CleanCove system provides a smoothly rounded, easy to clean curved transition from ceiling-to-wall and at wall-to-wall inside corners.

- Extruded aluminum coves snap into vinyl anchor strips, and welded 3-way inside corner assemblies make perfectly finished junctures at the complex inside ceiling corner and wall intersections.

28

PH: 1-800-932-0309 || FAX: 770-932-0809 || www.ultrapuretechnology.com

Cleanroom Tape MicroSeal Tape For cleanroom gowning, this conformable polyethylene tape can be used to ensure an effective seal between the glove and garment.

Perforations at 3” intervals allow the user to bind and tear at the optimum length to secure the glove. The low outgassing polyethylene film will remove cleanly leaving no adhesive residue. MicroSeal Tape is wound on a 3” plastic core with no liner.

- Available in white in 2 and 3 inch widths.

- Also available irradiated.

- The 18-yard roll will seal approximately 42 gloves.

Extreme Temperature Tape An extreme temperature tape comprised of transparent amber polyimide film with pressure sensitive silicone adhesive. The silicone adhesive ensures a clean release from most substrates, even after being exposed to high temperatures or below freezing applications.

- Flame resistant electrical insulation.

- Solder masking for circuit boards, heat sealing and lamination.

EZT - Construction Tape EZT Construction Tape is a high tack polyethylene tape with a rubber adhesive. The aggressive adhesive easily bonds different mediums, such as plastic and concrete or stainless steel. The unique serrated edge allows and easy tear at any length where blades and dispensers are not available.

- 2” width. Roll length 36 yards.

#1163 - Medium Tack Cleanroom Tape Has the stretch and feel of vinyl tape, yet has low outgassing and low metals. Available in multiple colors as well as clear (transparent). Leaves no residue, can be written on. Good for maintenance and construction.

- Sizes 1/2”, 3/4”, 1”, 1.5”, 2”, 3” and 4”.

CR100PC - Cleanroom Tape CR100PC Cleanroom tape is a vinyl tape specially processed for applications in and around the cleanroom. The tape is extremely conformable which makes it ideal for taping and sealing curved and irregular surfaces. The tape has a matte finish which can be written on with cleanroom pen. The synthetic rubber adhesive ensures a clean peel from wafer cartridges and cleanroom work surfaces.

- Available in nine colors plus black, white and transparent.

- Various widths. Roll length 36 yards.

- Good For sealing, color coding, labeling and batching.

PH: 1-800-932-0309 || FAX: 770-932-0809 || www.ultrapuretechnology.com

29

Hand Lotions NovaDerm - Lotion Barrier protectant lotion with an anti-microbial agent.

Non-greasy formulation with active ingredients proven to soften dry skin while at the same time re-moisturizing skin tissue.

NovaDerm does contain silicon. Can be used as a barrier cream and moisturizing agent with or without gloves.

Available in 500 ml saddle pump bottle for use with or without Touch Free Dispenser.

NovaDyne - Soap General purpose soap for use in commercial settings.

Lotion soap has built-in emollients and good sudsing.

Formulation is pH balanced so skin is left feeling smooth and deodorized. Synthetic formulation is free rinsing, leaving hands free of any residue.

Available in 500 ml saddle pump bottle for use with or without Touch Free Dispenser.

Hy-G-Clenz Anti-bacterial lotion soap meets OSHA standards and is effective against a wide range of both gram positive and gram negative bacteria.

A unique blend of .3% Triclosan and natural emollients this formulation is ideal for frequent handwashing. Kills germs while leaving hands feeling soft and smooth.

Available in 500 ml saddle pump bottle for use with or without Touch Free Dispenser.

BioClenz Soap Chlorhexidine Gluconate (CHG) skin cleanser/surgical scrub which offers rapid and persistent action against all gram positive and gram negative organisms.

BioClenz has a high sudsing emollient base, and an on-going kill rate of up to 6 hours. FDA approved and registered.

Available in 500 ml saddle pump bottle for use with or without Touch Free Dispenser.

NovaClenz Hand and Glove Sanitizer Effective and fast acting instant hand sanitizer which requires no sink, water or towels.

Clear gel contains 60% ethyl alcohol to provide excellent antiseptic and sanitization capabilities.

Formulation helps prevent bacterial transfer including Pseudonomas, Salmonella and Staphylococcus. Essential for pharmaceutical, bio-medical and health care applications.

Available in 500 ml saddle pump bottle for use with or without Touch Free Dispenser.

30

PH: 1-800-932-0309 || FAX: 770-932-0809 || www.ultrapuretechnology.com

Detergents NovaClean Floor Clean NovaClean Floor Clean is an all-purpose cleanroom concentrate filtered to 0.1 microns which will yield 60-128 gallons of cleaning solution per gallon container At the recommended dilution the formula claims sodium and potassium levels detectable only in parts per billion.

Low-ionic formulation will not generate a static charge.

Available in Quart, Gallon and 5- gallon containers .

MegaClean A heavy-duty cleaner and de-greaser which offers an effective alternative to toxic and flammable solvent-based cleaners, such as acetone and isopropyl alcohol.

Filtered to 0.1 microns it is geared to semiconductor, electronics, aerospace and clean-build operations. It is non-flammable, bio-degradable, water soluble and effective at Low Concentrations and will remove grease, adhesives and most photo-resist stains.

Available in quart, gallon, 5-gallon and 55-gallon containers.

NovaClean Lab & Glass Clean Low-ionic ready-to-use cleaner for work-stations, laminar flow benches, glass, plastic and acrylic screens, cleanroom curtains and painted surfaces.

Filtered to 0.1 microns, NovaClean Lab & Glass Clean has sodium and potassium levels detectable only in parts per billion.

Available in gallon containers as well as easy-to-use quart size spray bottles. The solution has a good evaporation rate and can be applied directly on the surface to be cleaned.

NovaHol - Cleanroom Cleaner This ready-to-use formulation offers the same fine filtration and low ionic levels of NovaClean with the addition of Isopropyl Alcohol to speed dry time.

With its extremely high evaporation rate, NovaHol is ideal for cleaning glass, acrylic, vinyl curtains and stainless steel surfaces.

NovaHol is available in an easy to use quart sze spray bottle and can be applied directly to the surface being cleaned. Gallon refill bottles are also available.

Ultra-1 Cleanroom Concentrate The new generation in cleanroom cleaners.

Ultra-1 is a biodegradable concentrated cleaning agent compatible with all classes of cleanrooms.

Ultra-1 is filtered to .2 microns and has a non-streaking, non-hazing formula.

Available in (1) gallon containers. (4) gallons per case.

PH: 1-800-932-0309 || FAX: 770-932-0809 || www.ultrapuretechnology.com

31

Disinfectants Decon - Ahol WFI 70% USP Isopropyl Alcohol, Filtered at 0.2 Microns, Double-bagged packaged and Gamma irradiated. Completely tested according to current USP compendium.

Delivered with lot specific Certificate of Irradiation, Certificate of Analysis, LAL Testing Analysis and Sterility Report. Completely traceable, Completely validated for sterility and shelf life.

Available: Spray, Aerosal Mist, Gallons, Trigger Spray, Squeeze Bottle.

Decon - Hand Decon - Hand is a gelled alcohol sanitizer for hand washing to decrease bacteria on the skin.

Used by applying thoroughly to the hands and allowed to dry without wiping, Double-bagged packaged, Gamma irradiated and manufactured in accordance with 21 CFR Part 211 Good Manufacturing Practices.

Available in Sterile or Non Sterile as well as with 316 Stainless Steel Wall Dispenser.

Ster - Ahol WFI Filtered at 0.2 Microns, Double-bagged packaged and Gamma irradiated. Formulated to 70% and denatured with a small percentage of Methyl Alcohol and Isopropyl Alcohol.

Completely tested according to current USP compendium and delivered with lot specific Certificate of Irradiation, Certificate of Analysis, LAL Testing Analysis and Sterility Report. Completely traceable and validated for sterility and shelf life.

Available in Aerosol Spray, Gallons or Trigger Spray.

Decon - Phene Sodium based, phosphate free phenolic synthetic germicidal detergent that is used where a broad spectrum disinfectant is required in moderate amounts of organic soil.

Filtered at 0.2 Microns, Double-bagged packaged, Gamma irradiated. and strong enough to kill a broad spectrum of pathogenic and non-pathogenic bacteria but, Mild enough to have no harmful effect on the surface being disinfected.

Available in Gallons, 8 oz., 4 oz., 2 oz., 1 oz. and SimpleMix, Sterile.

Decon - Phase Potassium-based phenolic germicidal solution used where a broad spectrum of disinfection is required in moderate amounts of organic soil.

Filtered at 0.2 Microns, Double-bagged packaged and Gamma irradiated and strong enough to kill a broad spectrum of pathogenic and non-pathogenic bacteria but mild enough to have no harmful effect on the surface being disinfected.

Available in Gallons, and SimpleMix, Sterile or Non Sterile or 2 oz.

Sterile.

32

PH: 1-800-932-0309 || FAX: 770-932-0809 || www.ultrapuretechnology.com

Disinfectants Decon - Cycle Phosphate free germicidal detergent filtered at 0.2 Microns, Double-bagged packaged, Gamma irradiated. Recommended for use in pharmaceutical, biotechnology, medical device manufacturing and hospitals to control the hazards of cross contamination.

Multi-phenolic formula designed to clean, disinfect, and deodorize any washable inanimate surface. Strong enough to kill a broad spectrum of pathogenic bacteria.

Available in Gallons, 2 oz., 1 oz., Sterile.

Decon - Clean Cleaning agent designed to remove residues from disinfecting agents.

Filtered at 0.2 Microns, Double-bagged packaged and Gamma irradiated.

One-step residue remover when diluted to 1:128 (1 ounce/1 gallon) of hard or soft water (400 ppm hard as CaCO3). Designed for washable, non-porous environmental surfaces and completely tested according to current USP compendium.

Available in Gallons, 4 oz., Sterile or Non Sterile.

Decon - Quat 100 A quaternary ammonium solution for use in hospital/medical and health care institutions. Filtered at 0.2 Microns, Double-bagged packaged and Gamma irradiated.

Effective as a broad spectrum hospital disinfectant, fungicide, deodorizer, hard surface disinfectant, food and non-food contact sanitizer (USDA D2) and Hepatitis B Virus (HBV).

Available in Gallon Concentrates or 8 oz. Concentrate Bottles Sterile or Non Sterile.

DECON-SPORE 200 Plus A peracetic acid and hydrogen peroxide solution that can be used as either a steriliant or disinfectant. Filtered at 0.2 Microns, Designed for the sterilization of manufacturing, packaging and filling equipment in aseptic processes.

Confirmed by AOAC protocol testing at a dilution of 5% in hard or soft water (500 ppm as CaCO3) for sterilization and a dilution of 0.4% in hard or soft water for disinfection.

Available in Gallons, 13 oz., 2 oz., 1 oz. and SimpleMix, Sterile.

Asepti - Cleanse Dispenser a Hands-free dispenser for DECON-AHOL WFI and DECON-HAND. The system has been designed as the most advanced infrared sensor dispensing system available in the pharmaceutical and biotechnology industries. The dispensing unit is designed to meet the requirements of cGMP clean room operations.

Designed in a dual power configuration of power supply. It can be powered by 4 D Cell batteries (4 D Cells last over 1 year) or connected to a 110 Volt receptacle. Mounts directly to on glass or walls and is water resistant in design.

PH: 1-800-932-0309 || FAX: 770-932-0809 || www.ultrapuretechnology.com

33

Cleanroom Mops & Rollers Foam Tacky Roller - Helps keep areas free of contamination with easy to use hand or pole attachments.

- Special anti-microbial agent providing long-lasting protection against bacterial growth.

- Plastic inner core insures cleanliness.

- Perfect for cleaning walls, floors, ceiling and hard to reach areas.

MicroMop - PVA - Cleanroom mop with an absorbency of 600% and drying time of 10-20 seconds.

- Ideal for semiconductor and microelectronic cleaning applications where a dry, residue free surface is essential.

- Not compatible with IPA. - Obvious choice for hi-tech applications.

ErgoMop - NovaLite - A roller mop with beveled edges which will effectively clean the ErgoMat anti-static and anti-fatigue line of floor coverings.

- Use dry for a strong brushing effect or wet for increased particulate removal.

- Works well on raised and grid flooring.

- Can be used with strong cleaning agents and alcohol.

- Attaches to QDNH-1 adapter for effective roll/lock cleaning operation.

- Autoclavable.

PilloMop - Slip Cover - Polyester slip cover for use with PM 648 PilloMop mop head.

- Designed for ultra-critical environments where clean-passes must be ensured.

- The elasticized slip cover can be pre-moistened, bagged and used as necessary.

- Soiled slip covers are easily removed and laundered.

- Extremely economical.

- Autoclavable.

PilloMop - NovaLite - Absorbent, hard-wearing, low-linting flat pad mop for walls, shelving and hard-to-reach areas.

- Can be used with alcohol and strong disinfectants.

- Autoclavable.

- Attaches to QDPH-1 adapter for 360º swivel and low profile applications.

- Standard size of 9” x 5”.

Twist Mop Head - Polyester - An economical self-wringing mop that cuts back on cleaning time and unnecessary hardware in the cleanroom.

- Ideal for laying down disinfectant.

-This looped polyester mop attaches to TH-1 handle for effective twist/wring action.

- Can be laundered and autoclaved.

- 100% polester.

34

PH: 1-800-932-0309 || FAX: 770-932-0809 || www.ultrapuretechnology.com

Cleanroom Mops MicroLoop Mop - A low cost loop mop in PolyGen or PVA material.

- Autoclavable.

- Can be used for service areas outside the cleanroom and for “clean build“ projects.

- Economical polyester mop head ideal for “Hazmat“ and general spill control.

- PVA version good for cleanroom support.

Curtain Cleaner PVA - Low-linting polyester covered foam slip cover to clean or apply disinfectant to cleanroom curtains and softwalls.

- Can be laundered and re-used.

- Resistant to strong disinfectants and steam sterilization.

- 12” in width. Attaches to Curtain Cleaner Handle CCH-48.

- Ideal for semiconductor and wafer manufacture.

PowerHead - NovaPoly Covered - Polyester covered foam mop head for critical applications, pharmaceutical and sterile support facilities.

- Covered foam minimizes particulation.

- Can be laundered, autoclaved and re-used.

- Designed for use with QDPHH-10 or 14 electropolished stainless steel handle.

- Can be used with PowerHead Bar PHB-10 or 14 to retrofit household type self-wringing handle.

- 10” and 14” heads available.

- Autoclavable.

T-Mop - PVA Cover -

Low-profile mop head.

Low-linting, fast drying and absorbent.

Launderable and re-usable.

Attaches to QDT series of adapters for 180º swivel.

Avoid strong detergents and IPA. Ideal for walls, floors and ceilings as well as applying disinfectants in sterile environments.

PolyGen Mop - An economical low-linting 100% polyester mop.

- The herringbone weave in the looped strands ensures no raw edges, guaranteeing low particulation.

- The PolyGen is absorbent enough to clean to a dry finish but can also be used to apply those disinfectants that require an extended drying time.

- The PolyGen holds up to strong disinfectants and can be autoclaved.

- For super critical applications the PolyGen is available irradiated.

Anticon 100 - Supersorb -

100% continuous filament polyester.

Constructed from GoldSorb fabric.

Laundered in ISO Class 1 Cleanroom.

Re-launderable.

Highly sorbent.

Can be used with commercially available hardware.

Ideal for cleaning of various critical environment floors.

PH: 1-800-932-0309 || FAX: 770-932-0809 || www.ultrapuretechnology.com

35

Mop Buckets / Wringers SlimLine Cart Systems - The core of the Slimline Cleaning System, this modular, electropolished stainless steel cart is available in 2 or 3 bucket configurations.

- When used with three B-7 buckets the system ensures correct disinfect, rinse and void stages in sterile and pharmaceutical processing.

- Can be used with or without the W-7 Wringer.

- The three grip-it holders on the back of the cart allow for an easy interchange and storage of handles and additional mop heads.

Slim T Double Bucket Cart - This simple and effective double bucket system is comprised of an electropolished stainless steel frame that easily transports two 6 gallon buckets.

- Excellent maneuverability is achieved with the 360 degree rotation of the caster wheels.

- The generous 19” width of the buckets makes them suitable for use with a variety of mop heads.

- The entire unit, including the polyethylene buckets, is autoclavable.

- Polypropylene and Stainless Steel material.

#2700 Stainless Steel Double Bucket System - Exclusive stainless-steel design doesn’t have any cracks, crevices, or holes to harbor bacteria or dirt.

- Easy to sanitize.

- Includes trolley, wringer and (2) buckets.

- 29 Qt. buckets.

- Stainless-steel casters allow ease of movement as well as sanitation.

- The entire bucket is autoclavable.

- With proper care, these buckets will provide a lifetime of corrosion-free, attractive use.

#2625 & 2606 - 14” Wall Washing Combo -

212 cu.in. 8-16 oz.

Cleanroom stainless-steel combo.

35-quart oval bucket and 14” wringer.

Designed for wall wash.

Made of 304 stainless steel, buckets and wringers resist abrading, rusting, discoloring, or staining in normal use.

- Bucket is not seamless.

36

PH: 1-800-932-0309 || FAX: 770-932-0809 || www.ultrapuretechnology.com

Cleanroom Vacuums Nilfisk - GM 80 CR The Nilfisk GM 80CR is a variation of the GM 80 â&#x20AC;&#x201C; the vacuum cleaner that has become a vacuum icon in a variety of industries. Lightweight, portable and quiet, the GM 80CR is perfect for use in cleanrooms, research labs and other critical environments. Four-stage filtration system includes a 2 1/4-gallon paper bag, main filter, microfilter and ULPA exhaust filter. A conductive hose and accessories provide ESD protection.

-

Quiet performance.

Meets cleanroom standards up to ISO 4 (Class 10).

Heavy-duty trolley adds mobility and glides over all surfaces.

Cleanroom-compatible polyethylene packaging prevents contamination during shipping.

Nilfisk - VT 60CR Expressly for cleanroom environments, the VT 60CR features a specially designed system that prevents motor carbon dust from escaping through the exhaust system. No filter change is required between wet and dry collection.

-

15-gallon tank capacity.

Multiple collection/disposal options.

Detachable trolley.

Water-, mildew-, rot-, and corrosion-resistant main filter protects HEPA Filter.

- Positive twist safety latches provide increased security - Variety of accessories.

Nilfisk - SS Spray Cleaner Vacuum The Nilfisk SS Spray Cleaner Vacuum applies and simultaneously recovers a variety of solutions, increasing productivity by combining two cleaning functions. The Nilfisk SS Spray Cleaner vacuum is ideal for cleaning a variety of resilient flooring, including renewing polymeric flooring used for contamination control in many cleanroom and gowning areas.

-

Cleanroom-compatible.

Large collection capacity.

No electrical restrictions.

Multiple-stage filtration.

Autoclavable.

Can be used with water, de-ionized water and a variety of disinfectant solutions.

Nilfisk - BackVacuum The BackVacuum is a powerful, lightweight, HEPA-filtered vacuum featuring a revolutionary ergonomic design that makes it ideal for cleaning confined areas. A patented rubber articulated joint ensures flexibility and allows the BackVacuum to conform to the operatorâ&#x20AC;&#x2122;s movement. Self-adjusting shoulder straps provide stability and allow complete freedom of movement while maintaining the ideal ergonomic position.

-

Lightweight (9.9 lbs.) and powerful.

Comfortable and maneuverable.

50-foot power cord.

HEPA filtration.

Accessory storage on belt.

PH: 1-800-932-0309 || FAX: 770-932-0809 || www.ultrapuretechnology.com

37

Particle Counters MET ONE - HHPC-2 / Handheld Air Particle Counter Provides an easy-to-read display for 2 particle channels. 0.3 micron minimum sensitivity through 20 micron available. Holds 100 samples in data memory and records date, time, counts, and sample volume. Easy data download and printing with included RS-232 interface cable and Windows-compatible software. Operates on a long-life rechargeable internal battery or AC power.

- Lightweight, intuitive handheld for spot checks and contamination control.

- 2 particle channels: 0.3 and 0.5 or 0.5 and 5.0 microns; IAQ and custom sizes available.

- Supports 21 CFR Part 11 compliance with PortAll Version 2.

MET ONE - 237A/237B / Portable Air Particle Counter Monitors six different size ranges simultaneously. Count data displays on the front-panel as total number of particles (cumulative count) or the particles in each size range (differential count). Offers four modes: Manual, Auto, Concentration, and Beep.

- Six particle size channels.

- Cumulative and differential counts from the built-in printer.

- Compatible with PortAll Version 2 software.

MET ONE - 228/229 / Handheld Air Particle Counter Detect discrete particles using a laser-based sensor. Weighs only 1.5 pounds. Internal rechargeable batteries last for 8 hours. The 228 displays the concentration in particles per cubic foot or particles per liter after a six-second sample. The 229 monitors total particle count after a one minute sample.

- One switch, one display, quick results: no complicated controls.

- 228 shows concentration in particles/L or particles/ft3.

- 229 shows total particle count in 0.1 ft3.

MET ONE - 2400/2408 / Portable Air Particle Counter Reliable and easy to operate. The built-in printer allows either immediate or delayed printing of results. Download 400-record buffer using PortAll Version 2. Counts in either cumulative or differential modes. Optional probes available for humidity, temperature and air velocity.

- 28.3 LPM (1 CFM) flow rate.

- Long Life Laser technology.

- Supports 21 CFR Part 11 Compliance with PortAll Version 2.

MET ONE - 3300 / Portable Air Particle Counter Samples at 28.3 LPM (1 CFM) with 0.3 micron sensitivity (3313) or 0.5 micron sensitivity (3315). Monitors six size channels. Operates from AC power or batteries. Buffer of 2000 records. Built-in printer.

Optional environmental sensors available: relative humidity, temperature or air velocity. ISO 14644-1 and Federal Standard 209E calculation modes.

- 28.3 LPM (1 CFM) flow rate - Long Life Laser technology - Supports 21 CFR Part 11 compliance with PortAll Version 2

38

PH: 1-800-932-0309 || FAX: 770-932-0809 || www.ultrapuretechnology.com

Clean Packaging Aclar - Extremely inert, non flammable clean film. Will not crack in extreme cold conditions.

- Excellent solvent resistance and sterilizable.

- Available in a variety of Mil. thicknesses.

- Can be purchased in bag form, flat stock, sheeting or lay flat tubing.

- Allows inspection and verification of the package contents at any time.

- Suitable for controlled environments as well as packaging situations that require high clarity, high moisture barrier and low contamination.

Nylon - Pink Static Dissipative material is the most economical form of ESD Protection.

- humidity independent, N-Octanoic acid free, does not promote corrosion and has no measurable outgassing.

- This material meets the electrical & physical properties of PRF-81705D Type II. - Excellent abrasive resistance and is extremely resistant to grease and oil.

- Autoclavable, FDA approved.

- Available in colors pink, orange and clear.

- Variety of Mil. thickness available.

- Sold in bag form, flat stock, lay flat tubing or sheets.

Polyethylene - Tough and very flexible and seals very easily.

- Has very good electrical properties and is chemically resistant to solvents.

- Also available in Anti-Static.

- Variety of Mil. thickness available.

- Sold in bag form, snap tear bags, bubble bag form, roll stock, flat stock or tubing.

- Pink Static Dissipative material is the most economical form of ESD Protection.

- Does not promote corrosion and has no measurable outgassing.

- This material meets the electrical & physical properties of PRF-81705D Type II.

Static Shield Bags - Static Shield bags provide anti-static protection.

- Available with pink anti-static bubble or cancel cushioning, Also available in open top or flap with optional tape.

- Static Shield Zip Close Cushion Pouches are three layer metallized based cushion pouch that provides anti-static protection while securing the item in the pouch with a zip closure.

- Available with pink anti-static bubble or cancel cushion.

- Metallized Layer is protected by polyester layer to enhance durability.

- Provides Faraday Effect protection from punctures and tears caused by sharp leads.

PH: 1-800-932-0309 || FAX: 770-932-0809 || www.ultrapuretechnology.com

39

Ionization Equipment Simco - Aerostat XC Extended Coverage Ionizing Air Blower The XC neutralizes static across an entire 2’ x 6’ benchtop area.

-

Rapid static charge decay.

Balanced to 0±5 V. Patented emitter point cleaner.

Three-speed fan.

Ionization statuslight.

Heater.

Simco - Gemini Profile Room Ionization Controller The system controller maintains contact between each emitter module and itself to verify system operations. Under normal conditions, the unit displays “Status Normal” to provide assurance that no fault conditions exist. Should a system fault occur, the controller identifies the address and type on its LCD. Our patented miswire protection design speeds and simplifies installation and prevents wiring problems.

-

Microcontroller Intelligence.

Self-monitoring and adjusting.

Fully integrated two-way communications network.

Continual polling of emitter modules and display of operating status.

- Pulse or Steady-State DC operation.

- Data port for communications to a PC or facility monitoring system.

Simco - Gemini Profile Emitter Modules Each module has an individual identification that allows the system controller or the remote control transmitter to address and control each emitter. The Gemini System’s flexibility allows easy positioning of emitter modules in the ceiling or where they are most needed in the cleanroom. The System is designed to minimize unidirectional airflow turbulence. It is available with SIMCO’s SiC emitters, the new standard for ultra-clean ionization.

Each emitter module contains emitter points, switching power supplies, and Microcontroller Intelligence, designed to maintain critical ion output and balance. Each module produces both positive and negative ions, which neutralize electrostatic charges in the work area.

- Easy mounting in all leading designs of flush, or on T-grid ceiling systems.

- Drop link communications.

- Active closed-loop feedback system.

- Individually adjustable via system controller or remote transmitter.

- Steady-state and Pulse modes can be universal or mixed - Easily replaceable emitters.

- Addressable emitter modules.

- Choice of SiC for ultra-clean environments, or tungsten emitters.

40

PH: 1-800-932-0309 || FAX: 770-932-0809 || www.ultrapuretechnology.com

Ionization Equipment Simco - Aerostat Guardian CR2000 The Guardian CR2000 ensures cleanroom compatibility using specially chosen components and materials. All fan and air bearing surfaces are manufactured to insure cleanliness. Fan assemblies are particle-tested to Class 10 (209E; ISO class 4) particle limits. The Guardian CR2000’s final assembly, final test, and packaging take place in a Class 100 cleanroom to minimize risk of contamination.

-

Inherently balanced to 0±5 V. Ion balance and ion output monitors.

Lockout key switch.

Class 10 cleanroom ISO-4 compatible.

Patented emitter point cleaner.

Simco - Top Gun Balanced to 0 +/- 15V, the Top Gun features high blow-off force to provide efficient cleaning and rapid static charge decay. A 0.01 micron filter at the exit of the gun ensures the air is clean. The gun body is lightweight but durable. It features a light-touch trigger, making it comfortable even for extended use. All functionality is built into the gun: a flow control valve, a balance adjustment for calibration, and a two level LED which indicates both power and ionization. The gun and cable are static dissipative. A hanger is provided for easy mounting.

-

Filter at gun exit to ensure clean air.

Lightweight ergonomic design for user comfort.

Adjustable airflow control.

Remote activation of ionization and air flow.

Ionization verification indicator light.

Simco - FMX-003 Electrostatic Fieldmeter The FMX-003 measures static voltages within +/- 22kV (22,000V) at a distance of 1”. Results are simultaneously displayed numerically and in bar graph format. POWER on/off, ZERO adjustment, Ion Balance (IB) and HOLD are all push button operation.

The circuitry of the FMX-003 has been designed to make measurements in areas using air ionization.

-

Easy to read, easy to use operations.

Lightweight, compact design.

Range light assures accurate and repeatable measurements Automatic range switching up to ±22kV(22,000V) at 1” (25mm) Digital and bar graph display.

Automatic power off after five minutes (may be disabled if preferred).

PH: 1-800-932-0309 || FAX: 770-932-0809 || www.ultrapuretechnology.com

41

Acrylic Dispensers AT-104 Divided Dispenser with 4 Compartments and front access for each compartment designed for multiple uses: gloves, bouffants, beard covers, shoe covers, etc.

-

16’’ H x 18’’ W x 6’’ D. 1/4’’ clean, clear acrylic.

Single lid with full-length hinge for durability.

Mounts to wall or free-standing.

Wall bracket included on back.

Flame treated edges for smoothness.

1 per case.

BD-600 Bouffant Dispenser with lid -

12’’ H x 12’’ W x 8’’ D. Full length hinged lid for easy loading.

Clean, clear 1/8’’ acrylic.

Large front opening allows easy access.

Flame treated edges for smoothness.

Mounts to wall or free standing.

Holds large volumes.

1 per case.

GD-400 4 Compartment Glove Dispenser with Front Access.

4 separate compartments with lids and front access openings.

-

12’’ H x 20’’ W x 11.5’’ D. Each lid opens separately.

Each compartment has front opening for easy access.

Mounts to wall or free standing.

Heavy duty wall bracket included.

1/4’’ durable clear acrylic.

Flame treated edges for smoothness.

1 per case.

AD-001 1 Compartment Bulk Dispenser with Closed Front.

Holds frocks, coveralls, smocks, aprons, etc.

-

24’’ H x 15.5’’ W x 10.5’’ D. 1 compartment.

Open or closed front option.

Mounts to wall or free standing.

Durable 1/4’’ clear acrylic.

Keeps apparel organized, neat and clean.

Flame treated edges for smoothness.

1 per case.

FLD-2400 Front-Load Glove Dispenser.

Top half of front lifts open for easy loading.

-

42

20’’ H x 16’’ W x 16’’ D. 1/4’’ acrylic-clear.

Flame polished edges for smoothness.

Mounting bracket on back.

Full length hinge for durability.

Large front opening for easy access.

1 per case.

PH: 1-800-932-0309 || FAX: 770-932-0809 || www.ultrapuretechnology.com

Trash Receptacles ST24SS - “DEFENDER” Square Step Can -

Dimensions: 15”Sq x 30”H. Weight: RB model - 29 lbs; PL model - 35 lbs.

Finishes: White, Red or #304 Non-magnetic Stainless Steel.

Capacity: 24 gal.

Underwriters Laboratories Listed, Factory Mutual Systems Approved and California State Fire Marshal Listed fire safe/self-extinguishing.

Complies with OSHA StandardS on Bloodborne Pathogens.

Piano hinged lid has restraint mechanism to prevent damage to walls and equipment.

Retainer bands hold poly bags securely within unit and can be used in conjuction with liners.

Leak-proof rigid plastic liner.

Powder coated for maximum durability.

Optional bilingual English/Spanish or fluorescent content decals available.

QST12 - “SILENT DEFENDER” Quiet Step Can -

Dimensions: 12”Sq x 23”H. Weight: RB model - 20 lbs, PL model -22 lbs.

Finish: #304 Non-Magnetic Stainless Steel.

Capacity:12 gal.

Complies with OSHA and OBRA requirements and NFPA Life Safety Code.

Piano hinged lid restraint mechanism prevents damage to walls and equipment.

New Quiet-Close mechanism prevents lid noise during operation.

Retainer bands hold poly bags securely within unit and can be used in conjunction with liners.

Leak-proof rigid plastic liner.

Optional bilingual English/Spanish or fluorescent content decals available.

MST3.5 - Medi-Can Step Can -

Dimensions: 15.75” H x 10” Dia. Weight: 6.38 lbs.

Finishes: White, Red, Stainless Steel.

Capacity: 3.5 gal.

Complies with OSHA Requirements and OBRA Regulations.

Complies with OSHA Standard on Bloodborne Pathogens.

Powder coated for maximum durability. ìHands Freeî foot pedal opens self-closing lid.

Tight fitting lid overlaps molded plastic gasket for maximum odor control and quiet operation.

- Leak-proof rigid plastic liner.

- Carrying handle allows easy placement.

- Optional bilingual English / Spanish or fluorescent content decals available.

QST7 - Bio-Hazard Can -

Dimensions: 12”Sq. x 17H”.

Weight: RB model - 17 lbs., PL model -18 lbs.

Finishes: White, Red. Capacity: 7 gal.

Complies with OSHA and OBRA requirements and NFPA Life Safety Code.

Piano hinged lid restraint mechanism prevents damage to

walls and equipment.

New Quiet-Close mechanism prevents lid noiseduring operation.

Retainer bands hold poly bags securely within unit and can be used in conjunction with liners.

Leak-proof rigid plastic liner.

Powder coated for maximum durability.

PH: 1-800-932-0309 || FAX: 770-932-0809 || www.ultrapuretechnology.com

43

Cleanroom Chairs Class 1000 Clean Room Chairs - Chrome-plated metal parts, vinyl seat underwrap with filtered exhaust ports, Task Control ergonomic mechanism and vinyl upholstery recommended for clean room use.

- Class 1000 is equivalent to ISO Class 6.

- 5- Legged reinforced nylon base.

- Concave seat with backrest and lumbar support.

- Cusomizable within guidelines pertaining to Class 1000 cleanroom specifications.

Class 100 Clean Room Chair - Choose AET chairs for top performance in a variety of environments including; industry, education, laboratory, clean room, static control, health care and office.

- Breathable Class 10 Clean Room Chairs.

- Chrome-plated metal parts, non-outgassing, spun-woven nylon upholstery with high-efficiency

filter media, Task Control ergonomic mechanism and clean room casters or glides.

- Parts are cleaned and single-bagged in BioFitĂ­s clean room in certified clean bags.

- Breathable Class 10 is equivalent to ISO Class 4

Class 100 Clean Room/Static Control Chairs - Chrome-plated metal parts, Class 100 filtration system, Task Control ergonomic mechanism, conductive glides or casters, drag chain, continuity contact points, and Microcon vinyl upholstery.

- Class 100 is equivalent to ISO Class 5.

- Different bases available to meet varied environmental and budget demands.

- Select from a variety of options such as adjustment controls, backrests, casters and glides.

- Modular construction allows component upgrades, interchanges and replacement.

- Guaranteed performance - Tough finishes to resist crackling and peeling.

44

PH: 1-800-932-0309 || FAX: 770-932-0809 || www.ultrapuretechnology.com

Cleanroom Chairs Class 10 Clean Room/Static Control Chair - Chrome-plated metal parts, Class 10 air reservoir, Task Control ergonomic mechanism, conductive casters or glides, drag chain, continuity contact points, and Microcon vinyl upholstery.

- The parts are cleaned and single-bagged in BioFit’s clean room in certified clean bags.

- Class 10 is equivalent to ISO Class 4.

- Select from a variety of options such as adjustment controls, backrests, casters and glides.

Class 1 Clean Room/Static Control Chair - Chrome-plated metal parts, C1 air reservoir, Articulating Seat Control and air reservoir bag that are both encased in a protective pan, drag chain, Microcon vinyl upholstery, continuity contact points, and conductive casters or glides.

- The parts are cleaned and double-bagged in BioFit’s clean room, in certified clean bags, for customer assembly in the customer’s clean room.

- Class 1Max is equivalent to ISO Class 3.

Basic Specifications: Backrest: 14 1/2” wide x 9 1/2” high, lumbar support, plastic protective panel.

Seat: concave, 18 1/2” wide x 16 1/2” deep x 3” thick with internal seatboard bumperguard.

Controls: standard with Task Control -- Soft Touch pneumatic seat-height adjustment, fixed rearward seat tilt of 3_°, backrest tilt, backrest-height adjustment.

Metal parts: on ETT and BTT Series chairs have a powder-coated finish as standard or a chrome-plated finish when specified with a C option code.

Base: 5-legged black reinforced composite base with 27” leg spread (26” caster to caster); not for ESD use.

Casters and Glides: Casters and Glides: Models available standard with casters have an R following the model number/manufacturing code. The remaining models are standard with nickel-plated glides.

Standard casters are a single-wheel ball bearing caster for hard floors; many other optional casters/glides are available.

Fire Retardant: meets California Technical Bulletin 117; treatment to meet CAL 133 is optionally available.

Upholstery: A wide range of upholstery vinyls and fabrics are available to meet your needs.

PH: 1-800-932-0309 || FAX: 770-932-0809 || www.ultrapuretechnology.com

45

Benches, Cabinets and Sinks Motorized Shoe Cleaner - 1600 VA-H: fully automatic shoe cleaner with hepa filter providing advanced filtration, quieter operation, built in vacuum, and disposable dust bags.

- 1600 VA: fully automatic shoe cleaner with built in vacuum pump and disposable dust bags.

- 1600 SA: fully automatic shoe cleaner for use with external vacuum systems.

-

Simple to operate.

Rugged design gives long life.

5 brushes for complete contamination removal.

Large footprint for stability.

Speed control, brush motor.

Solid gowning Bench -

Available in 9”, 12”, 16” depths x 36”, 48”, 60” and 70” lengths.

Type 304 solid stainless steel surface.

Include foot plates.

Strong, secure and easy to wipe down.

Perforated gowning bench with Undershelf - Provides wall storage and facilitates laminar flow.

- Designed to hold up to four tiers.

- Shelf widths range from 14” to 24” and the post height range from 14” to 63”.

- Available in chrome and stainless steel.

Vertical Storage Cabinets - Designed to provide efficient storage of Cleanroom garments.

- Type 304 stainless steel construction throughout.

- Open wire design, promotes laminar air flow.

- Adjustable stainless steel leveling feet provide floor mount or free standing option.

- Unique hanger. capture mechanism and hanger design for theft deterrence.

- Hangers are spaced at 3” intervals.

- Electro-polished, Type 304 stainless steel hangers are included.

Sinks -

Type 304 construction, bowls and top assembly.

Poly cutting board/sink cover provided as standard.

Deep-drawn seamless coved corner bowls.

Legs are braced front to back.

Legs are located adjacent to sink bowls for maximum weight support and stability.

- Swirlaway drainage.

- Die-stamped creased drainboards for positive drainage.

- Five models and five bowl sizes available.

46

PH: 1-800-932-0309 || FAX: 770-932-0809 || www.ultrapuretechnology.com

Tables Cleanroom Tables -

Heavy Duty Cleanroom Work Tables.

Solid or Perforated Tops, Electropolished available.

14 Guage Type 304 Stainless Steel.

Shipped knocked down for easy assembly.

Dimensions: 30”, 36”, 44” x 36”, 48”, 60”, 72”, 96”.

Available with drawers, undershelves, cantilevered shelves.

Available with casters, H-Frame or C-Frame.

Specialty Tables - Advanced polymer construction provides excellent corrosion resistance performance for the most corrosive lab environments.

- Table features smooth surfaces that are easy-to-clean.

- Mobile units can be easily moved to clean behind table area.

- Available top materials include Type 304 Stainless Steel or TRESPA phenolic resin (black or gray).

- Available in 30” Depths by 30”, 36”, 48” or 60” Lengths.

- Multiple accessories available!

Mobile Table with Flex-Master and Drawer - Flexible system for new and existing operations when versatility is needed.

- Custom overshelf system utilizing standard components.

- Stainless steel.

- Unlimited combinations of shelves and utility racks.

Heavy Duty Stainless Worktable - Stainless Worktables are designed specifically for Lab environments.

- All-stainless solid shelves designed for cart wash and autoclave applications.

- Built primarily from Type 304 stainless which provides long-life performance and excellent corrosion resistance.

- Innovative design ensures unit rigidity and optimum load bearing performance.

- Units can change as quickly as your needs change. By using various accessories, including multiple caster options, many different product configurations become possible.

Worktable with Backsplash - Worktable with backsplash and tubular base.

- Budget, Deluxe and Spec-Master series feature front with rolled down edge and sides turned down 90 degrees.

- Stainless steel construction.

- Wide selection of sizes and styles.

- Easy assembly with full range of options and accessories.

PH: 1-800-932-0309 || FAX: 770-932-0809 || www.ultrapuretechnology.com

47

Tables,Shelves and Racks AdjusTable Overhead Systems - Stainless steel table top/work surface.

- Each work system comes with two 33” posts, two 63” posts, and your choice of table bases: two C-frames; two H-frames; one C-frame and one wire shelf; or one H-frame and one wire shelf.

- Available in solid or perforated tops, brushed or electropolished.

- Cantilevered shelves are offered in stainless steel or chrome finish and are sold separately.

- Optional keyboard and utility drawers are available.

Gowning Racks with Hanger Rail - Available in single, double and cantilevered configurations.

- Stainless steel or Electropolished finishes.

- Stainless steel construction offers a non-contaminating surface that eliminates particle shedding.

- Electropolished models feature electrochemically passivated surfaces for the most demanding requirements.

- 24” width, 75” height, and available in 48” to 84” lengths.

- Hanger slots are standard 3” centers.

5 - Shelf Cleanroom Rack - Stainless steel or Electropolished finishes.

- Available in various widths and heights.

- Adjustable, easy to assemble and engineered for maximum space utilization.

- Customizable with various add-ons and accessories.

- Flat top and wire shelving available.

MetroMax Shelving - Reinforced polymers give MetroMax incredible strength800 lbs.

- MetroMax has a lifetime warranty against corrosion and rust, so it is perfect for damp, humid conditions as well as dry storage.

- MetroMax assembles easily in minutes, without tools.

- Posts have numbered grooves at 1-inch increments.

- A wide range of accessories such as shelf dividers, stackable ledges, drawers and slides, rods and tabs, bin markers and more, let you customize MetroMax to your exact needs.

SmartWall Plus - Provides wall storage and facilitates laminar flow.

- Designed to hold up to four tiers.

- Shelf depths range from 14” to 24” and the post height range from 14” to 63”.

- Available in chrome and stainless steel.

48

PH: 1-800-932-0309 || FAX: 770-932-0809 || www.ultrapuretechnology.com

Cleanroom & Lab Carts Angled Shelf Wire Cart - Open wire construction promotes higher visibility and permits greater air circulation, which reduces dust and contamination build-up.

- QuadTruss design makes shelves up to 25% stronger.

- Posts are numbered on vertical 1” increments to ensure, fast, level assembly of shelves and maximum flexibility for unit/cart configuration.

- Numerous sizes and combinations available.

- Accessories available include dividers, ledges, shelf markers, enclosure panels, and more.

Mobile Security Units - 14” to 30” in width, length of 39-1/4” to 61-1/4”, and a height of 69”.

- Ideal for storing and transporting valuable materials.

- Security units are offered in chrome or electropolished stainless steel finish.

- Stationary and mobile units available.

Cleanroom Carts -

Solid Top Stainless Steel, Wire or Chrome Cleanroom Carts.

Autoclavable, Stainless Steel Cart Washable Casters.

Post Heights Range from: 21” - 96”.

Shelf Dimensions: 18” x 24” - 36” x 60”.

Available with Dividers, Shelf Trays, Ledges, Label Holders.

Swivel or Locking Casters Available in 5” Heights.

Specialty Carts - Two-basket and four-basket capacity glassware solutions are offered.

- Solid MetroMax bottom shelf provides spill retention and can be removed from shelf frame for easy cleaning.

- Glassware carts are built, primarily, from MetroMax advanced polymers, providing lifetime corrosion protection.

- Choose from a wide range of accessories, including all-polymer casters, for maximum corrosion resistance and premium performance.

Laboratory Carts - Built from advanced polymers that include Microban® antimicrobial product protection, Metro’s innovative MetroMax design(s) provide the ideal product platform.

- Available product solutions are modular by design and offer the customer ultimate flexibility by permitting the end user to select the most appropriate caster based on their budget and/or application requirements.

- Choose between 2 and 3-shelf models.

- Space-saving 20” x 30” cart footprint.

PH: 1-800-932-0309 || FAX: 770-932-0809 || www.ultrapuretechnology.com

49

Starsys Workcenters Starsys Benefits - Facilitates fast, efficient lab installation.

- The ability to easily reconfigure lab furniture layout as needs change.

- The ability to easily reconfigure unit design.

- Flexibility to design a storage solution to exact needs.

- Corrosion-proof polymer components for a contamination-free product.

- Durable, easy-to-clean, polymer enclosures that wonâ&#x20AC;&#x2122;t chip, peel, dent, or

rust, â&#x20AC;&#x201D; ever.

- Rigid aluminum and coated metal substructure, combined with advanced polymers, provide a robust, stable work environment for even the most sensitive equipment.

- A high level of organization.

- Easy access to supplies.

- Greater storage density in a smaller footprint.

50

Starsys Workcenter Counter Tops Door/Drawer Handles The Design selection includes: Slate Blue

Jade

Dark Taupe Yellow

Slate Blue Laminate

Mauve

Code Blue

Black

Red

Jade Laminate

Black Epoxy

Note: Requests for stainless, solid surface, and other top materials can also be accommodated.

PH: 1-800-932-0309 || FAX: 770-932-0809 || www.ultrapuretechnology.com

Starsys Mobile Workcenters Overhead w/ Cabinet cabinet shelves are removable, easy-toclean, and are available in both solid polymer and epoxy-coated, open-wire shelf designs.

Starsys mobile workcenter units can be specified with or without overhead cabinets attached.

Available overhead heights include 24”, 27”, 30”, 36” and 48”.

Overhead cabinet accessories include light fixture, cassette bins for small item storage and organization, and poly shelf dividers.

3 Shelf w/ Cabinet Epoxy resin counter tops come standard with Starsys mobile, pre-configured workcenter units.

Other counter top materials such as stainless steel, colored laminates, phenolic, and hardwoods are also available on request.

Starsys Doors, available in multiple heights, can be specified with or without window, as well as locking and non-locking. 5” polyurethane plate casters, two with brakes, make unit easy to maneuver in tight lab spaces.

Desktop Station Facilitates fast, efficient product or furniture installation.

The ability to easily reconfigure lab furniture layout as needs change.

Door handle detail is GMP compliant and can be accented with choice of 8 available colors.

Corrosion-proof polymer components for a contaminationfree product.

Ability to easily reconfigure unit design.

Flexibility to design a storage solution to exact needs.

PH: 1-800-932-0309 || FAX: 770-932-0809 || www.ultrapuretechnology.com

51

Laminar Flow Equipment Single Pass System Ambient air enters the pre-filter area and is forced through a HEPA filter, affording downward laminar flow through the clean zone.

The air is then exhausted out the front of the unit.

If necessary, the work deck can be perforated to allow air to pass directly through the unit and then out below the work deck.

Recirculating System The operation of a recirculating system is similar to that of a single pass unit.

The air is recirculated through a perforated work deck to a rear-mounted return air duct.

This returns the air to the blower intake where it is forced through the HEPA filter again and returned back to the clean zone.

Clean Fume Hood Exhaust The design of the Clean Fume Hood-Exhaust includes a perforated work deck.

Ambient air enters the system at the top, pressurizes the blower plenum and then the clean air is forced through the HEPA filter with 99.99% effectiveness.

The air travels in a laminar flow down through the perforated work surface into the plenum area below and exhausts through the rear mounted exhaust duct to the outside of the central exhaust system as determined by the design.

Horizontal Flow Benches The high density particle board, epoxy painted steel or stainless steel construction of the Laminar Flow Table Top unit reduces noise and vibration.

The HEPA filters incorporated into these units guarantee 99.99% efficiency in removing all particles of 0.3 micron or larger.

The sterile air produced across the work area meets the requirements of class 100 of Federal Standard 209B, ISO and bioclean conditions.

The Economy Table Top filtration unit is constructed of high-density particle board, epoxy painted steel or stainless steel and all exposed surfaces are covered with Formica.

The adjustable voltage regulator maintains a nominal 100 FPM air velocity.

52

PH: 1-800-932-0309 || FAX: 770-932-0809 || www.ultrapuretechnology.com

Cleanroom Components Standard Air Showers - Air Showers can solve many decontamination problems by offering an effective way of reducing the contaminants carried by individuals entering or leaving a controlled area.

- Single-person Air Showers to multi-section tunnels are available to accommodate our customers’ specific needs.

- The Air Showers supply concentrated ISO Class 5 (Class 100) airflows to lift off contamination while the individual stands in or walks through the chamber.

- Pressurized air streams at a velocity ranging from 6,000-10,000 feet per minute to ensure the effective scrubbing action which is necessary to remove particulate matter.

HEPA Filtered Gowning Cabinet - Maintain all of your cleanroom garments and gloves in a HEPA fitlered gowning cabinet.

- Available with wire or perforated stainless steel shelves, clear polycarbonate doors with stainless steel piano hinges anodized aluminum air relief grilles.

- Construction can be stainless steel, powder coated steel, polypropylene, or plastic laminate.

- Nonshedding materials ensure cleanroom compatibility.

- Available in various sizes and configurations.

- Provides excellent storage for cleanroom garments, gloves and wipers.

Polycarbonate Dessicators & Dry Boxes - Preserves moisture-sensitive wafers in a dry, particle-free environment.

- Automated nitrogen controls maintain user-selected humidity level (ambient down to 0% RH).

- Engineered for optimal storage density of 200mm or 300mm wafers (in most standard cassettes and lot boxes).

- Available in strong, rigid acrylic or static-dissipative PVC, which protects against static charges and the particles they attract.

- Advanced construction features include plenum chamber, 304 stainless steel door frames, LiftLatches™, and one-piece front sealing panel.

Pass Thrus - Prefabricated unit used to pass items to and from a contamination controlled environment.

- Standard clean room construction completely sealed, exterior surface covered with white vertical grade plastic laminated doors of .375 clear acrylic or 1/4” polycarbonate material fastened by continuous hinge.

- Automatic Door Operators.

- Static Dissipative Construction.

- Special Finishes.

- Electrical Door Locks.

- Tinted Acrylic Doors.

- Custom Sizes.

PH: 1-800-932-0309 || FAX: 770-932-0809 || www.ultrapuretechnology.com

53

Cleanroom Ceiling Systems CLEANROOM CEILING GRID - Extruded from anodized aluminum in 1”, 1.5” or 2” sizes.

- Gasketed or Un-Gasketed, Gel Seal for Knife edge filters.

- Available in White or Clear Anodized finish and with integrated light fixtures and sprinklers.

- May be suspended via wire or threaded rod and turnbuckle.

HEPA FAN FILTER MODULES - HEPA Fan Filter Modules, 99.99% efficient @ 0.3 microns - Variable speed control, Pre-Filters, Plugs and Links optional - Sizes: 2’ x 2’, 2’ x 3’, 2’ x 4’, 4’ x 4’, 2’ x 6’ - Custom designs available, Cleanroom Side Replaceable.

- Available in 120V, 220V and 277V.

SEALED CLEANROOM LIGHT FIXTURES - Cleanroom Light Fixtures maintain positive pressure - Available in 2’ x 2’, 2’ x 4’ or 2’ x 6’ sizes .

- Teardrop light fixtures available.

- Universal Ballast Available.

PANELIZED CEILINGS - The PharmaCeiling is designed as a flush ceiling system which provides end users and owners with the ability to utilize the area above the cleanroom for mechanical services or walk-on capabilities for maintenance access when applicable.

- The PharmaCeiling System is a 2” thick composite panel using a steel skin on both sides of an aluminum honeycomb core.

SELF SUPPORTING CEILING GRID - Airlock cleanrooms and other Simplex isolation enclosures offer a variety of ceiling options, including suspended ceilings that can accommodate light, medium and heavy load needs.

- The modular frame components are structurally designed for easy assembly and can be adapted to various room configurations.

- Heavy-duty truss systems can be added to standard struts to accommodate spans up to twenty-one feet wide and heavier ceiling loads.

54

PH: 1-800-932-0309 || FAX: 770-932-0809 || www.ultrapuretechnology.com

Softwall Cleanrooms SIS 212 SOFTWALL - Heavy-duty 2-1/8” x 2-1/8” anodized aluminum extrusion framework.

- Basic extrusion used to build all types of structures, from simple machinery frames to cleanroom enclosures.

- Choice of compression latch or bolt-together designs to ensure a strong structural connection.

- Available with Simplex AirLock ceiling modules with integrated, fully gasketed 2” T-grid.

- Easy to customize to fit any application.

- Choice of pre-fabricated enclosures or bulk material to build your own enclosures.

- Casters are available to make enclosures portable.

- Leg levelers can be used for uneven floors or critical placement of rooms.

AIRLOCK - Urethane closed-cell foam gaskets seal frame-to- frame connections.

- Vinyl inserts lock into frame with airtight seals.

- Frame construction with knock-together corners allows for replacement of individual parts.

- Most walls are interchangeable for future expansion.

- Ceiling frames latch into position in the same manner

as the walls, and can be designed to accommodate various types of filtration and lighting units.

- Lightweight aluminum frames are available in anodized clearcoat or epoxy powdercoat white.

SIS 797 - Can be fitted for wall panel inserts of ABS, polycarbonate, aluminum composite, acrylic, tempered glass or other materials.

- Easy-to-clean features are ideal for USP <797> applications for pharmaceutical compounding and medical device manufacturing, assembly and packaging applications.

- Suitable for ISO Class 8 (Class 100,000) applications to Class 4 (Class 10).

- Order the SIS 797 with the Simplex integrated ceiling system in factory assembled modules for fast and simple construction.

- All assembly hardware is accessed from the outside and sealed for a professional look.

- Can be designed as a single-pass cleanroom, or as a re-circulating design with air-chase walls and ceiling plenum.

- Engineered to be modular. When your needs expand, so does the SIS 797.

PH: 1-800-932-0309 || FAX: 770-932-0809 || www.ultrapuretechnology.com

55

Modular Cleanrooms Once Thru Design -

Modular Cleanroom Once Thru Design.

Anodized aluminum framing system.

Pass Thrus with Mechanical Interlock.

Clear polycarbonate wall panels great for tours!

Soffet wall hides HEPA filters and ductwork for a clean finish.

- Achieve ISO Class 5 - 9; Fed Std. Class 100 - 100,000.

- Great with Epoxy Floors!

Recirculating Systems -

Modular Cleanrooms with Recirculating Air Handling Systems.

Multiple Panel finish options, Easy to Clean, Fast to install.

Achieve ISO Class 3 - 9; Fed Std. Class 10 - 100,000.

Great for Micro Electronics, Semiconductor, Laser and Fiber Optic Applications.

Great with ESD Seam Welded Vinyl Flooring.

Custom Applications - Ultrapure Technology, Inc. has the design / build expertise to â&#x20AC;&#x153;think outside the boxâ&#x20AC;? to meet any challenges!

- Cleanroom or controlled environment.

- Horizontal Flow Class 100 Cleanroom.

- Non-Out Gassing Wall Material.

- Modular, Expandable, Flexible.

- Great for Aerospace!

56

PH: 1-800-932-0309 || FAX: 770-932-0809 || www.ultrapuretechnology.com

Pharmaceutical Cleanrooms Pharma Wall - Wall panels provide flush, seamless wall surface 0.625” (15mm) wall panels utilized to allow flush wall surface on both sides on stud framework.

- Ideal for wash down environments.

- Easy removal of panels without disturbing adjacent panels, ceiling or framework for minimum contamination - Fewer components yields quicker cleanroom installation.

- Complete flexibility allows the wall system to be designed for any configuration.

- Interfaces with all ceiling systems, flooring systems, existing modular wall systems and conventional construction for complete systems compatibility.

- Universal design allows easy connection to a metal stud framework.

- Easy removal of panels without disturbing adjacent panels, or ceiling for minimum contamination - Superior finish

BioGard -

Meets ASTM E-84.

Meets USDA and FDA approval.

Chemical and High Impact Resistant.

Anti-microbial Properties.

Standard .080” Thickness Coved Floor, Ceiling, and 2” corner radius.

Heat welded for a seamless, homogenous wall system.

Monolith Panels - Monolith panels utilize a tongue and groove panel. connection, thereby eliminating the need for separate connecting posts.

- White painted steel laminated panels available in 3, 4, and 6 inch thicknesses.

- Thicker panels allow for taller heights, up to 27’ H. - Complete systems including ceilings, windows, doors, pass thrus.

- Optional Smooth White Aluminum Panel finish as well.

PH: 1-800-932-0309 || FAX: 770-932-0809 || www.ultrapuretechnology.com

57

Modular In-Plant Offices

Vinyl Polystyrene Hardboard

Polystyrene

Vinyl Gypsum

Polystyrene

Honeycomb

Aluminum

Fiberglas Reinforced Plastic

hardboard panels provide excellent thermal insulation and can be made with a wide variety of surface finishes

Class A noncombustible panels provide great sound reduction and excellent thermal properties while meetings most of today’s building codes.

Ideal for laboratories, break rooms, and bathrooms, these durable wall panels are designed for areas that will be exposed to significant moisture or harsh cleaning agents.

Features - Heights: Standard wall heights up to 18 feet.

- Thickness: 3” thick wall panels - Load Bearing: Yes

From simple office partitions to sophisticated cleanroom walls, we have the perfect wall system for your application.

The anodized aluminum framing system creates a modern, high-tech look while custom panel surface colors provide the ability to meet both the appearance and functional requirements of cleanroom and paint booth applications.

- Stud Construction: Aluminum stud construction with unique design that enables fast, easy assembly and provides quick access to wiring.

Nonprogressive construction makes it easy to expand, modify, or relocate these units.

- Adaptable: Modular construction allows for nearly any configuration – including 2-story, mezzanine, 2, 3, or 4 wall units.

Design criteria include man loads, 2story,roof-mounted HVAC and duct work, and storage loads. Please consult factory for specific needs.

- Heavy-duty, 20 gauge steel door with baked enamel finish and 18 gauge frame with mortised hinges, sweep, and key-in-knob lockset.

- ¼” thick clear tempered safety glass.

58

Removable “snap-in” cover plate allows for wiring capabilities and easy inspection of raceways without affecting the structural integrity of the stud.

PH: 1-800-932-0309 || FAX: 770-932-0809 || www.ultrapuretechnology.com

Mezzanines Industrial Mezzanines - Create new production, office, storage or assembly space, locker rooms, parts departments, stockrooms, cafeterias, company records storage, work platforms, distribution centers and more.

- Choose from single or multi-level designs customized to your specific application.

- Add a vertical lift, rack, shelving,carousels, conveyors or in-plant offices.

Industrial Guard Rails - Single guardrails (16” high) or double guardrails (42” high) can be mixed and matched to fit any application. Lower rail is 2” clear of floor to provide convenient backstop for pallet storage.

- Standard guardrail sizes are 4’, 6’, 8’ and 10’ and custom lengths are available as well.

- Ships in one complete package with all components and hardware.

Safety & Hand Rails - Ideal for in-plant offices, work platforms, balconies, stairs, equipment crossovers, landings, catwalks and mezzanines.

- Continuous top rail provides visually attractive, finished appearance.

- Professionally engineered to meet all building codes including uniform and point load requirements.

- Double level or triple level handrail systems are offered.

- Floor mounted rail system with 4” kickplate is available as one complete package when used on mezzanines and elevated platforms.

Bollards - Bollards are extremely durable, structural steel design with easy bolt to floor installation.

- Bollards are high tensile 5” x 5” x 3/16” steel tube with 3/4” x 10” x 10” welded baseplates.

- Bollards are available in heights of 17” and 43”.

- Protected with an attractive, durable, powder coat finish.

- Choose from 14 colors. Standard yellow ships within 48 hours.

- Custom colors and finishes also available to meet your needs.

Swing Gates -

Available with 6’ and 8’ openings.

Professionally engineered to meet all building codes.

Unique features address total safety and operational efficiency.

Attractive, durable finish. Choose from 14 powder coat colors.

Custom colors and finishes also available upon request.

Heavy-Duty Steel Bar Grating - Bar grating is a non-combustible steel deck.

- Typical bar grating (19W4, 1” x 1/8”) is 82% open.

- For catwalks, exteriors or when light & airflow are important.

PH: 1-800-932-0309 || FAX: 770-932-0809 || www.ultrapuretechnology.com

59

Gator Jawtm 90° Inside L-Angle bracket -

Zinc plated steel.

4 Mounting holes.

Requires 4 GJF-500 fasteners. 2.5’’ x 2.5’’ x 1’’ OD. Flange area: 1’’ x 2.5’’.

11 Gauge thick.

Weight each: 2.5 oz.

90° Inside gusset bracket -

Zinc plated steel.

4 Mounting holes. Requires 4 GJF-500 fasteners. 4’’ x 4’’ x 1’’ OD. Flange areas: 1’’ x 4’’.

12 Gauge thick.

Weight each: 5.7 oz.

Universal shelf support bracket -

Zinc plated steel.

1 Mounting hole. Requires 1 GJF-500 fastener. 1.875’’ x .875’’ x 1’’OD. 1.125’’ x .75’’ x .81’’ ID. 14 Gauge thick.

Weight each: 1 oz.

Corner insert key for cabinet door framing - Mill finish aluminum.

- Press fit.Approx. .875’’ x 3’’ x 3’’.

- Weight each: 4.3 oz.

GJC-415R Rectangular-Plate swivel caster -

Grey rubber wheel.

Plain bore, bearing swivel and wheel lock. 4’’ x 1 1/2’’ Wheel.

5 1/4’’ Mount height.

3 1/2’’ x 2 12’’ Plate.

Load rating 250 lbs. each.

Trim Cap for frame -

60

Snaps into channels of GJX-175 or GJX-875 frame.

ABS Plastic.

Colors Available: Black and Silver / Gray.

1.125”wide x 12’ lengths.

PH: 1-800-932-0309 || FAX: 770-932-0809 || www.ultrapuretechnology.com

Gator Jawtm Main framing member -

6063 T5 Aluminum.

Clear anodized finish.

Available in 16’, 12’ & 8’ lengths.

1.75’’ x 1.75’’ square Weight per foot: 1.35 lbs.

Universal framing (doors, hanging bins etc.)

-

6063 T5 Aluminum.

Clear anodized finish.

Available in 12’ lengths.

1.75’’ x .875’’

Weight per foot: .68 lbs.

Cabinet door framing -

6063 T5 Aluminum, Clear anodized finish.

Available in 16’ & 8’ lengths.

Requires: GJB-90-CK corner keys.

Tail accepts any 1/4’’ thick insert.

For 1/8’’ inserts use glazing GJM-100-GZ. 1.75’’ x .25’’ .75’’ deep tails for inserts.

Weight per foot: .35 lbs.

90° Outside corner gusset -

4.375’’ x 4.375’’ OD. Zinc plated steel.

4 Mounting holes.

Requires 4 GJF-500 fasteners.

Flange areas: 1’’ x 3’’.

Metal: .105 thick.

Weight each: 5.2 oz.

90° Double outside corner gusset -

Zinc plated steel. 6 Mounting holes.

Requires 6 GJF-500 fasteners. 7.750’’ x 4.375’’ OD Flange areas: 1’’ x 3’’ Metal: .105 Thick.

Weight each: 9 oz.

Glazing Seal for 1/4” insert panels -

Snaps into channel behind panel color:grey.

3/4” wide x 3/8” thick.

12’ lengths.

For use with GJX-175 framing.

PH: 1-800-932-0309 || FAX: 770-932-0809 || www.ultrapuretechnology.com

61

Modular Drawer Cabinets Light Duty / Laboratory Modules Load capacity (from 550 lb to 1925 lb).

Design adapted to manual storage in most industrial and commercial sectors.

Extremely versatile structure,to which a wide range of accessories can be added.

Functional design that is easy to use.

Common post for Mini-Racking and industrial shelving.

Heavy Duty Drawer Cabinets 400 lb capacity per drawer. Sizes: 3” - 14” H. Several housing accessories are available such as foldaway shelves, hanging-side cabinets, laminated wood tops, etc.

A variety of drawer accessories are available such as partitions, dividers, plastic bins, protective foams, etc.

The full-width ergonomic handle ensures a smooth and comfortable motion when opening the drawers.

Mobile Drawer Cabinets 400 lb capacity per drawer. Sizes: 3” - 14” H. Several housing accessories are available such as foldaway shelves, hanging-side cabinets, laminated wood tops, etc.

A variety of drawer accessories are available such as partitions, dividers, plastic bins, protective foams, etc.

The full-width ergonomic handle ensures a smooth and comfortable motion when opening the drawers.

Work Centers Wide variety of accessories provide flexibility for custom layouts.

All components are assembled to the uprights with plastic knobs or installed with hooks.

Layout and position of components may be changed without using tools, allowing your system to evolve with your needs.

Many units can be made mobile.

Spider Shelving / Racking The unique T-shape post offers up to 7 fixing zones for different applications.

Plus, its hollow center allows for installations without interference.

Assembly is simple : shelves are installed on the posts, using 4 compression clips in 14 gauge steel.

Mini-Racking integrated into your shelving optimizes your storage possibilities.

Customize your Spider® system by adding a wide range of accessories.

62

PH: 1-800-932-0309 || FAX: 770-932-0809 || www.ultrapuretechnology.com

Manufacturers 3M Accu-Seal Advance Tabco Aeropackaging Air Control A.L.M.A. American Air Filter Ansell Edmont Industrial Atmos Tech Berkshire Biofit Calapro Capaul Cardinal Health Clean Rooms International Coventry CT International-CTI Cubic Designs DuPont Dwyer Instruments Dycem Eagle MHC Ebtech Ergomat Gator Jaw Geerpres, Inc. Gordon, Inc. Hach Ultra Analytics Hardwood Products Hepair Intermetro Industries John R. Lyman (Lym -Tech) Leatherwood Plastics Liberty Packaging Micronova, Inc. Nilfisk, Inc. OAK Technical, Inc. Plastic Concepts Portafab, Inc. Portaking Precept Medical Protective Industrial Products-P.I.P. Quality Rubber Products-QRP Rousseau S-Curve Sierra Scientific Simco Simplex Strip Doors, Inc. Sporicidin Texwipe Ultra 1 Ultraclean Products Ultratape United Receptacle, Inc. Veltek Associates, Inc.-VAI Wear Well-Tennessee Mat Co. White Knight Engineered Products Worklon-Superior Surgical

Visit us on the web @ www.ultrapuretechnology.com

PH: 1-800-932-0309 || FAX: 770-932-0809 || www.ultrapuretechnology.com

63

速

325 Brogdon Road Suwanee, GA 30024 1-800-932-0309 w w w. u l t r a p u r e t e ch n o l o g y. c o m