Click on the Foster or Gamko logos to see each price list
Key Accounts Sales Tel: +44 (0)1553 698467
Email: keyaccount@foster-gamko.com
Regional Sales Tel: +44 (0)1553 698485
Email: regional@foster-gamko.com
Export Direct Tel: +44 (0)1553 780500
Email: export@foster-gamko.com
Coldstores Tel: 0843 216 8866
Email: info@fostercoldstores.com
Product Support Tel: +44 (0)1553 780400
Email: support@foster-gamko.com
Service Tel: +44 (0)1553 780333
Email: service.uk@foster-gamko.com
Spares Tel: +44 (0)1553 780300
Email: parts@foster-gamko.com
Marketing Tel: +44 (0)1553 698374
Email: marketing@foster-gamko.com
Credit Control Tel: +44 (0)1553 698482
Email: creditcontrol@foster-gamko.com
Other Departments Tel: +44 (0)1553 691122
Email: info@foster-gamko.com
By Appointment to Her Majesty Queen Elizabeth ll Suppliers of Commercial Refrigeration Foster Refrigerator, King’s Lynn
EcoPro G3 Cabinets
The next generation of professional refrigeration is here
With G3, you get the best of both worlds: high performance coupled with low energy consumption, from the Refrigeration Experts.
Huge market-leading capacity with four shelves as standard on single door cabinets, maximising usable space.
The redesigned condenser means little maintenance and incredible efficiencies across the entire range.
Foster Shield means you can rest assured, that from advanced temperature control to hygienic design, you’re protected from the dangers of unsafe food storage.
The controller display uses pure LEDs incorporating InGaN technology, meaning it achieves higher resolution, lasts longer, all while using less power.
304 is the gold standard in performance stainless steel with Foster’s unique polishing system meaning that the heaviest touchpoints in a kitchen are covered.
To see our EcoPro G3 counters click here
EcoPro G3 Cabinets - Single Door
Operates efficiently in ambient temperatures up to 43°C (exceeds climate class 5).
EcoPro G3 Cabinets - Single Door
EcoPro G3 Cabinets - Single Door
EcoPro G3 Cabinets - Short
EcoPro G3 Cabinets - Double Door
EcoPro G3 Cabinets - Double Door
EcoPro G3 Counters
The next generation of professional refrigeration is here
We offer a wide selection of EcoPro G3 counters to ensure you find the right option for you and your business. From drawer combination to saladette cut out counters, these high-performance professional refrigeration units are fitted with energy efficient, commercial grade components for maximum reliability and minimum cost.
250,000 counter variations available for your customisation.
The redesigned condenser means little maintenance and incredible efficiencies across the entire range.
A reduced footprint – the more compact design of G3 counters allow them to fit in the tightest of kitchen spaces without losing capacity.
Foster Shield means you can rest assured, that from advanced temperature control to hygienic design, you’re protected from the dangers of unsafe food storage.
The controller display uses pure LEDs incorporating InGaN technology, meaning it achieves higher resolution, lasts longer, all while using less power.
To see our EcoPro G3 cabinets click here
Note: Drawers
At
EcoPro G3 1/2 Counters
OPTIONS
304 stainless steel back and unit cover
100mm Splashback
Saladette cut out with cover
Half drawers
Third drawers
out
+£286
+£312
+£1,428
Less worktop, supplied with s/s cover (reduces height by 28mm) +FREE
Levelling bolts in lieu of castors +FREE
Stainless steel shelf (GN 1/1)
+£86
Additional nylon coated shelf (GN 1/1) +£76
Stainless steel trayslides (per pair)
H f rames for bridging saladette (each)
Helicoil mains lead
Gastronorm Pan Packs (100mm deep)
Right hand mounted refrigeration unit +FREE
Legs in lieu of castors -
100mm (height 835mm to 865mm) +FREE
150mm (height 885mm to 935mm) +FREE Alternative height castors -
Saladette dimensions 510 x 305mm (w x d). Accepts 1x GN1/1 pans or 3 x GN 1/3 pans per saladette (maximum 100mm depth) (per section) (per section)
All images and / or photographs shown are for illustration purposes only
Note: Drawers will accommodate GN1/1 pans up to a maximum depth of 150mm (1/2 drawer models) or 100mm depth (1/3 drawer models)
Less condensing unit (castors not available, legs supplied as standard) Refrigerator +FREE Freezer +FREE NB. Please specify all options required at the time of ordering Featured options
Saladette
EcoPro G3 1/3 Counters
(1/2 drawer models) or 100mm depth (1/3 drawer models)
Refrigerator +1/+4°C
Refrigerator +1/+4°C
Refrigerator +1/+4°C
Refrigerator +1/+4°C
Refrigerator +1/+4°C
Refrigerator +1/+4°C
Refrigerator +1/+4°C
Refrigerator +1/+4°C
EcoPro G3 1/3 Counters
OPTIONS
Featured options
Half drawers
+£1,126
Third drawers
+£1,820
Saladette cut out
+£918
304 stainless steel back and unit cover
100mm Splashback
Saladette cut out with cover
+£392
+£324
+£1,538
Less worktop, supplied with s/s cover (reduces height by 28mm) +FREE
Levelling bolts in lieu of castors +FREE
Stainless steel shelf (GN 1/1)
Additional nylon coated shelf (GN 1/1)
Stainless steel trayslides (per pair)
H f rames for bridging saladette (each)
Helicoil mains lead
Gastronorm Pan Packs (100mm deep)
+£86
+£76
+£62
+£64
+£138
- 4 x 1/2 stainless steel +£80
Saladette dimensions 1040 x 305mm (w x d). Accepts 2 x GN1/1 pans or 6 x GN 1/3 pans per saladette (maximum 100mm depth) (per section) (per section)
- 6 x 1/3 stainless steel +£86
Right hand mounted refrigeration unit +FREE
Legs in lieu of castors -
100mm (height 835mm to 865mm) +FREE
150mm (height 885mm to 935mm) +FREE
Alternative height castors -
100mm (height 885mm) +FREE
100mm and 15mm spacer (height 900mm) +£94
Less condensing unit (castors not available, legs supplied as standard) Refrigerator +FREE Freezer +FREE
Please specify all options required at the time of ordering All images and / or photographs shown are for illustration purposes only
Note: Drawers will accommodate GN1/1 pans up to a maximum depth of 150mm (1/2 drawer models) or 100mm depth (1/3 drawer models)
EcoPro G3 1/4 Counters
EcoPro G3 1/4 Counters
No. shelves: 2 per door section (GN1/1)
Electrical supply: 230/50/1
Gross Volume: 585 Ltr
Dimensions (mm)
Note: Drawers will accommodate GN 1/1 pans up to a maximum depth of 150mm (1/2 drawer models) or 100mm depth (1/3 drawer models)
Refrigerator +1/+4°C
Refrigerator +1/+4°C
Refrigerator +1/+4°C
Refrigerator +1/+4°C
Refrigerator +1/+4°C
Refrigerator +1/+4°C
Refrigerator +1/+4°C
Refrigerator +1/+4°C
Refrigerator +1/+4°C
Refrigerator +1/+4°C
Refrigerator +1/+4°C
EcoPro G3 1/4 Counters
options Half drawers +£1,126
304 stainless steel back and unit cover
100mm Splashback
Saladette cut out with cover
Third drawers
Saladette cut out High temp models only
+£422
+£334
+£1,774
Less worktop, supplied with s/s cover (reduces height by 28mm) +FREE
Levelling bolts in lieu of castors +FREE
Stainless steel shelf (GN 1/1)
Additional nylon coated shelf (GN 1/1)
+£86
+£76
Stainless steel trayslides (per pair) +£62
H f rames for bridging saladette (each)
Helicoil mains lead
Gastronorm Pan Packs (100mm deep)
+£64
+£138
- 6 x 1/2 stainless steel +£118
- 9 x 1/3 stainless steel +£140
Right hand mounted refrigeration unit +FREE Legs in lieu of castors -
100mm (height 835mm to 865mm) +FREE 150mm (height 885mm to 935mm) +FREE
Alternative height castors -
100mm (height 885mm) +FREE
100mm and 15mm spacer (height 900mm) +£170
Less condensing unit (castors not available, legs supplied as standard) Refrigerator +FREE Freezer +FREE
Saladette dimensions 1570 x 305mm (w x d). Accepts 3 x GN1/1 pans per saladette (maximum 100mm depth) (per section) (per section)
All images and / or photographs shown are for illustration purposes only
Note: Drawers will accommodate GN1/1 pans up to a maximum depth of 150mm (1/2 drawer models) or 100mm depth (1/3 drawer models)
NB. Please specify all options required at the time of ordering
EcoPro G3 2/2 Counters
EcoPro G3 2/2 Counters
OPTIONS
Featured options
304 stainless steel back and unit cover
100mm Splashback
Saladette cut out with cover
Half drawers
+£1,320
drawers
cut out High temp models only
+£332
+£316
+£1,538
Less worktop, supplied with s/s cover (reduces height by 28mm) +FREE
Levelling bolts in lieu of castors +FREE
Stainless steel shelf (GN 2/1)
+£86
Additional nylon coated shelf (GN 2/1) +£76
Stainless steel trayslides (per pair) +£62
H frames for bridging saladette (each) +£64
Helicoil mains lead +£138
Right hand mounted refrigeration unit
Saladette dimensions 955 x 510mm (w x d). Accepts 3 x GN1/1 pans per saladette (maximum 100mm depth) (per section) (per section)
+FREE
Legs in lieu of castors -
100mm (height 835mm to 865mm) +FREE
150mm (height 885mm to 935mm) +FREE Alternative height castors -
100mm (height 885mm) +FREE
100mm and 15mm spacer (height 900mm) +£94
All images and / or photographs shown are for illustration purposes only
Note: Drawers will accommodate GN2/1 pans up to a maximum depth of 150mm (1/2 drawer models) or 100mm depth (1/3 drawer models)
NB. Please specify all options required at the time of ordering
+£918
Third
Saladette
EcoPro G3 2/3 Counters
EcoPro G3 2/3 Counters
OPTIONS
Featured options
Half drawers
+£1,320
drawers
304 stainless steel back and unit cover
100mm Splashback
Saladette cut out with cover
+£514
+£334
+£1,774
Less worktop, supplied with s/s cover (reduces height by 28mm) +FREE
Levelling bolts in lieu of castors +FREE
Stainless steel shelf (GN 2/1)
+£86
Additional nylon coated shelf (GN 2/1) +£76
Stainless steel trayslides (per pair) +£62
H frames for bridging saladette (each)
Helicoil mains lead
cut out
+£64
+£138
Right hand mounted refrigeration unit +FREE
Legs in lieu of castors -
Saladette dimensions 1605 x 510mm (w x d). Accepts 5 x GN1/1 pans per saladette (maximum 100mm depth) (per section) (per section)
+£1,024
100mm (height 835mm to 865mm) +FREE
150mm (height 885mm to 935mm) +FREE
Alternative height castors -
100mm (height 885mm) +FREE
100mm and 15mm spacer (height 900mm) +£94
All images and / or photographs shown are for illustration purposes only
Note: Drawers will accommodate GN2/1 pans up to a maximum depth of 150mm (1/2 drawer models) or 100mm depth (1/3 drawer models)
NB. Please specify all options required at the time of ordering
Third
Saladette
The next generation of our awardwinning condenser, revolutionising the efficiency
of refrigeration
Fitted across the G3 range of cabinets and counters, Slimline cabinets and EcoShow Multidecks as standard
Reduces maintenance costs and customer site disruption
Helps to maintain more reliable temperature control improving food safety
Equipment lasts longer
Increased carbon reduction through lower energy use
FlexDrawer
Innovative and flexible solutions from Foster
An innovative extension to our counter range, the Foster FlexDrawer offers innovative counter storage solutions for even the most demanding of professional kitchens.
Can change temperature from fridge to freezer at the touch of a button
Incredibly flexible – clever drawer design holds 3x GN 1/1 pans wide, meaning ALL space is usable
Designed to accommodate hot cooking equipment such as broilers, griddles and induction hobs
Massive strength – drawer runners can hold up to 200kg meaning unrivalled quality is assured
Space saving – 775mm width models available
And so easy to clean!
Fully removable robust ABS drawer bins
FlexDrawer Refrigerated and Freezer Storage Drawers
FlexDrawer
Refrigerated and Freezer Storage Drawers
(mm): *Add 20mm to depth if product is to be wall-sited (stopper required for air circulation - detachable if not wall-sited)
Note: Max worktop weight loading: 150kg
*Add 20mm to depth if product is to be wall-sited (stopper required for air circulation - detachable if not wall-sited)
Note: Max worktop weight loading: 150kg
Slender design with the big performance Slimline
The Foster Slimline range of cabinets have been cleverly designed to fit in compact or awkwardly shaped kitchen environments, whilst still offering outstanding storage capacity, style and efficiency.
The +stayclear condenser means little maintenance and incredible efficiencies
Bottom mounted refrigeration system draws air from the cooler part of the kitchen ensuring efficient operation
So slim that even the double door model can go through most single pedestrian doorways
Even temperature distribution and fast recovery achieved by advanced air circulation, meaning an optimum temperature to keep your food fresher for longer
High quality forced air refrigeration system will operate up to 40ºC (ISO Climate Class 5)
Energy efficient R290 refrigerant, the greenest refrigerant available on the market
Slimline Cabinet - Single Door
Slimline Cabinet - Double Door
BEST SELLER
For your convenience
Our inhouse call centre is available for service enquiries
Monday to Friday 08:30 – 18:00.
There when you need us
We have a nationwide network of trained engineers and over 39,000 spare parts available for next day delivery (Mon-Fri).
Our refrigeration products have been engineered to provide years of exceptional performance, efficiency and reliability.
Even the most reliable products require some level of care to ensure optimal performance, month after month, year after year. It is all about making sure food is safe and drinks are perfectly chilled and that’s where Foster and Gamko’s aftercare team is here to help.
To save you time any spares required can be purchased through our online spares shop at foster-spares.co.uk
Extended warranties are available.
Built for you, designed for your budget XTRA by Foster
The XTRA range has been cleverly designed to provide a solution that meets your refrigeration requirements on a budget. Available at a competitive price, the range includes a suite of value for money products offering reliability that you can depend on.
Affordable and reliable refrigeration by Foster
Available for delivery directly from our UK manufacturing plant:
– No importing delays – get your XTRA when you need it
– Unrivalled aftercare - 98% of spare parts held in stock
– Full 2 years parts & labour warranty from the UK market leader for total peace of mind
A full range of value for money refrigeration you can depend on:
– 600/1300 litre Gastronorm Cabinets
– 4 00 litre Slimline Cabinets
– 2 and 3 door Gastronorm Counters
Upgraded specification giving you even more value!
– Energy efficient R290 hydrocarbon refrigerant available across the range, reducing your energy bills
– Upgraded cabinet airflow design further improves p erformance, making sure cold air gets to your food
XTRA
Slimline Cabinet - Single Door
Undercounter cabinets
These convenient, practical and tough Undercounter Cabinets offer on-the-spot storage of products right where it’s needed - at the point of preparation. Undercounter refrigeration is perfect for tight kitchen areas as they use less space under the work bench for refrigerated
200 Undercounter Cabinets
Store your ingredients where you need them - at the point of preparation.
Glass door models operate in ambients of up to 25°C (ISO Climate Class 3).
Glass door models operate in ambients of up to 25°C (ISO Climate Class 3).
Note:
Low Level Counters
Heavy duty cooking equipment can rely on the support of the Foster Low Level Counters. Undercounter refrigeration is provided at the point of cooking, offering a base for a char-grill, griddle or broiling top. Ideal for quick service restaurants and pubs as it provides refrigerated storage underneath the cooking area itself.
- Designed to carry up to 300kg (evenly spread) – invaluable to any quick service cook-off station
- Choice of two or four stainless steel drawer models
- Robust build with heavy duty handles and fixings to withstand constant use
- All models fitted with drawer locks and lockable castors as standard
Drawers: 2
Pans
Gastronorm Roll Ins
Bakery Storage cabinet (20 tray capacity)
Chest Freezers (suitable for storing ice cream)
With all the quality characteristics associated with Foster products, these robust, large capacity chest freezers are finished in a white laminate exterior with aluminium interior and a stainless steel lid for increased protection.
- I ntegrated lock for maximum security - Control panel with ‘on’ light, thermometer and quick freeze switch for simple control - Climate Class 4, for operation up to 30˚C ambient temperature - R600a refrigerant / manual defrost
Our chest freezers are designed with stainless steel lids for increased protection. Our chest freezers are designed with stainless steel lids for increased protection.
FCF305 (331L Chest Freezer)
Mobile heated cabinets
Mobile heated cabinets ideal for transporting heated product to the point of service.
- Can maintain +70ºC for up to 1 hour without power (depending on food type and quantity)
- Includes handle for ease of mobility
- Mechanical thermostat displays the temperature even when the unit is switched off, making it ideal for mobile usage
No. Shelves:
For when you need everything to hand Prep
Perfect food prep whatever your operation, with fresh ingredients at your fingertips. So whether you’re making pizzas, sandwiches, salads or desserts, you can minimise your kitchen processes whilst maximising your speed of service and profitability.
Our Prep Station has been designed with the operator in mind, all pans and work bench height are within comfortable reach
The fan assisted, forced air system delivers even temperature holding to both the counter base and top pan storage section
The range is presented with a modern, sleek 304 stainless steel exterior and aluminium interior, placing hygiene at the forefront of design for storing open ingredients
Energy-saving natural hydrocarbon refrigerant is available on our most popular models at no extra cost
Clever inner catch tray stops food from falling into the main storage area, quickening clean down times
A raft of options available to suit your preparation requirements, ranging from drawer sections and 150mm deep gastronorm pan arrangements, to the convenience of crumb trays
304
FPS1/3HR-101 (440 litre capacity 15 cu. ft.)
No. Shelves: 6
Top accepts: 7 x GN1/3 Pans
(Max 150mm depth)
Electrical
Our three door gastronorm storage prep station also has a roller blind as standard. At a glance
0% interest-free credit. Nothing to pay for 3 months. Zero hassle.
Spread the cost of our market-leading refrigeration with interest-free payments over 12 or 24 months. Plus there’s nothing to pay for the first 3 months. Find out more at fosterrefrigerator.com/IFC
Blast Chillers and Freezers
The essential element to the commerical kitchen
Experts in blast chilling and freezing since 1973, Foster’s latest Touchpad range maximises the condition, taste and texture of your food.
The industry choice, since 1973 for meeting hygiene standards, preserving the quality of your food and reducing food waste
Our new upgraded standard blast chiller models have the addition of an occasional freeze capacity for ultimate flexibility
Just press and go! Forget the confusion of other blast chillers with Foster’s intuitive user friendly control panel
– Clear colour coding to indicate cycle status
– Automatically selected timed or probe chill/freeze options
Exceed your quality expectations
– Blast chill from +70°C to +3°C in 90mins with an entry temperature of up to 90°C
– Blast freeze from +70°C to -18°C in less than 240mins
304 stainless steel interior & exterior: the ‘gold standard’ in performance finishes meaning quality is assured
Range of large capacity modular blast chillers and freezers available designed to cope with even the most demanding, high volume kitchens
Cabinet
Blast Chiller and Freezer (15kg chilling capacity)
Cabinet Blast Chiller and Freezer (22kg chilling
The BCT Range – Blast Chillers with occasional freeze capacity
Foster’s upgraded range includes an occasional freeze capacity, denoted by the suffix of the product code:
BCT38-18
BCT = Blast Chiller Touchpad
38 = 38kg blast chilling capacity
18 = 18kg occasional blast freezing capacity
The range is said to have ‘occasional freeze’ capacity as there is no integrated defrost system, meaning users needing to blast freeze on a regular basis should choose the dedicated BFT range. At a glance
The BFT Range – Dedicated Blast Freezers
Foster offers a dedicated blast freezer range, with a freezing capacity of +70ºC to -18ºC in less than 240 minutes within specifications.
BFT38
BFT = Blast Freezer Touchpad
38 = dedicated 38kg blast freezing capacity
It should be noted that the BFT range can also operate as a blast chiller if required.
Cabinet Blast Chiller and Freezer (52kg chilling capacity)
Roll in and Modular Blast Chillers & Chiller/Freezers Information
Condensing Unit Guidance Notes
Foster can offer the complete package on request. The following is a guide of considerations for typical applications. Please note that as each installation is unique, it is the responsibility of the installing engineer to select the components relevant to prevailing site conditions and the customer’s intended method of operation.
Condensing Unit
The conditions experienced by the condensing unit will vary considerably throughout the cycle. The capacity has been defined in given conditions but please ensure that:
When selecting the condensing unit for Blast Chilling, the evaporating temperature range should be a minimum of +10°C to -25°C to cope with the pull down load.
When selecting the condensing unit for Blast Freezing, the evaporating temperature range should be a minimum of +10°C to -40°C on MBCF occasional freeze models. The MBCF models use MOP expansion valves rated at -15°C.
Condensing Unit Components
Where the dealer supplies the Condensing Unit, all of the following items need to be supplied: Condensing Unit, Oil Separator, Oil Separator Heater, HP/LP switch, Sight Glass, Drier Suction Line Vibration Eliminator, Crankcase Heater, Liquid Line Solenoid Valve (must be fitted at liquid inlet to Blast Chiller Coldroom, not at the Condensing Unit), Power Box (this should contain a minimum of lockable isolator, circuit breakers, contactors and current overloads to suit the Condensing Unit).
The start method for the compressor will depend on equipment size and site conditions. ie. DOL, Star Delta, PWS.
On MBCF models only, an interlock preventing both defrost and pump down simultaneously may be required depending on rating of electrical supply. Suction Line insulation, refrigerant and electrical cabling also to be supplied by the dealer.
The installer should consider aspects such as capacity control, condenser head pressure control and unloaded start (as deemed necessary by site conditions and anticipated usage).
For additional protection, the following should be considered: Phase failure, Suction Line Accumulator (particularly with short pipe runs where there is potential for liquid return).
Recommendations
To facilitate fault diagnosis we suggest that a shut off valve and sight glass be installed just after the liquid line solenoid valve and a pressure line connection in the suction line exit from the Blast Chiller/Freezer.
Where a double module unit is installed, it is usual to supply a common liquid and suction line from the condensing unit to the Blast Chiller/Freezer and branch off on top of the coldroom. Fit shutoff valves and sight glass in each branch after the tee.
Additional Information
MBCT models are supplied floorless for blast chilling application only.
MBCFT models are supplied complete with 25mm floor and are suitable for occasional blast freezing and non-ground floor sites.
Chilling capacity 70°C to 3°C in less than 90 minutes within specifications. Entry temperature of up to 90°C for chilling. Freezing capacity from 70°C to -18°C in less than 240 minutes within specifications.
All models supplied less condensing unit for remote applications. Separate electrical supply required for condensing unit (3 phase + neutral). For full details on condensing units and modular products visit www.fosterrefrigerator.com
Electrical Supplies
MBCT75 / 100 / 150
Electrical supply: 230V/50Hz/1Ø
Connected Load: 1.1kW
MBCFT75 / 100 / 150
Electrical supply: 230V/50Hz/1Ø
Connected Load: 5.1kW
MBCT250
Electrical supply: 400V/50Hz/3Ø
Connected Load: 1.1kW/Ø
MBCFT250
Electrical supply: 400V/50Hz/3Ø
Connected Load: 2.6kW/Ø
RBCT 20-60
Specific model to accept the Rational 201 trolley with a chilling capacity of 60kg
Modular Blast Chillers
Modular models designed to take most standard trolleys, chilling capacities from 75kg to 250kg, with occasional freezing on MBCFs
Roll In Cabinet Blast Chiller (60kg chilling capacity / Rational 201 Trolley)
Electrical supply:
RBC 20-60: 400/50/3-16A
RBC 20-60 (remote): 230/50/1*
*(separate 3ph supply required for condensing unit)
Efficiency meets stunning display, with the new EcoShow. With an 80% energy saving on previous models and our new revolutionary uplighting, your products have never looked so good.
The EcoShow range can store between 306 and 884 cans and that’s without double stacking!
Maximum visibility through the side panels for enhanced visibility of content
Our extraordinary uplighting uses LED lighting (patent pending) with new anti-glare feature
Frameless glass doors save 80% on energy compared to doorless models
All models fitted as standard with our award-winning +stayclear low maintenance condenser
EcoShow EMD700G
EcoShow EMD900G
The Innovative +stayclear condenser means little maintenance and incredible efficiencies across the entire range.
Frameless glass doors save 80% on energy compared to doorless models
EMD1200G
glass doors
a glance Maximum visibility through the side panels for enhanced visibility of
EcoShow EMD1500G EcoShow multideck with
glass doors
At a glance Our extraordinary uplighting uses LED lighting (patent pending) with new anti-glare feature
SELLER
EcoShow EMD1800G
This
Open Front Multideck Display Chillers
Showcasing your products beautifully
From convenience stores and cafes to bakeries and supermarkets; Foster Multideck Display Chillers are available in two ranges that offer the perfect solution to suit all applications.
Huge capacity
– Slim Multidecks stock 3 sandwich packs deep on a slimline footprint
- Pro Multidecks hold 7 coke bottles deep and over 5 display levels
Designed using cutting-edge ‘CFD’ modelling technology for genuine temperature retention ensuring food stays fresher for longer
Brilliantly bright LED lighting lasts 10x longer than fluorescents and saves money
Enlarged thick toughened glass for maximum display and enhanced safety
Base dimensions: 1393 x 415 mm (wxd) 330ml drink can capacity (single stack): 504
(mm)
Slimline multideck with night
panels
Slimline multideck with
panels
Open Front Slimline Multideck FMSLIM 1800
Depth includes 60mm spacer which is required if product is to be wall-sited.
Open Front Pro Multideck FMPRO 900
Pro multideck with night blind and glass end panels
Open Front Pro Multideck FMPRO 1200
Open Front Pro Multideck FMPRO 1500
Pro multideck with
glass end panels
Open Front Pro Multideck FMPRO 1800
Depth includes 60mm spacer which is required if product is to be wall-sited.
Foster and Gamko Leasing. Market-leading refrigeration in bitesize payments. Tasty.
Lease our products over 3 or 5 years and take advantage of bitesize, 100% tax-deductible payments. Freedom and flexibility, without the capital outlay. Find out more at fosterrefrigerator.com/leasing
Ice machines
FS20 Cuber
FS50 Cuber
FS90 Cuber
F132 Modular Cuber
F202 Modular Cuber
F302 Modular Cuber
FMIF 120 Integral ice flaker
0% interest-free credit. Nothing to pay for 3 months. Zero hassle.
Spread the cost of our market-leading refrigeration with interest-free payments over 12 or 24 months. Plus there’s nothing to pay for the first 3 months. Find out more at fosterrefrigerator.com/IFC
Made-to-measure large capacity refrigeration Coldstores
Foster’s innovative coldstore range includes standard size packaged coldrooms and custom coldrooms designed to maximise your budget and storage capacity on site with a wide choice of refrigeration equipment. Our diverse range has been developed to meet the demands of your business.
UK manufacturer, ensuring we carefully manage and maintain product quality, continuously reducing our carbon footprint and providing customers with significantly shorter lead-times in comparison to overseas manufacturers
Industry-leading, minimum 12 months parts and labour warranty, available 24 hours a day, 7 days a week, 365 days per year!
Our expertly trained and experienced team provide no obligation free site surveys available anywhere within the UK
Full project management service whatever the size of project to ensure site specific method statements, risk assessments, delivery routes and procedures are adhered to, ensuring a smooth installation process
Full mechanical and electrical schedule is available for every job we produce, allowing customers total clarity and avoiding any issues on site
Choosing your Coldstore
Advantage + Standard Coldstores
Where budget comes first.
Foster Advantage + are a fixed range of 6 coldroom sizes, ideal when budget is a major purchase consideration.
– Competitive fixed price
– Remote or integral refrigeration system options
– Delivered, installed and commissioned by Foster Coldstores technicians
– 12 month warranty as standard
– Free site survey
Bespoke Coldstores
Where space is at a premium.
Bespoke coldrooms are designed to maximise your available site space, allowing you the flexibility and a choice of door positioning, coldroom height and dimensions. Bespoke coldrooms offer you all the benefits of designing and building your own tailor made coldroom.
– Utilise all available site space
– Fast and accurate quotations from our Foster sales team
– Quick delivery, installation and commissioning
– Installation supervised by Foster Coldstores experts from start to finish
– Simply provide a sketch of your site and we will provide you with a quotation. Alternatively we can carry out a free full site survey, eliminating any specification issues
– 12 month warranty as standard
Ultra Low Energy Coldstores
Save energy, save money.
The Ultra is a full turnkey low energy solution providing real world energy savings of over 30% to the average customer.
In every business there is increased awareness of operating costs, and this is our most cost effective option. Significant energy cost savings of up to 30% can be quickly achieved.
Environmentally friendly features include:
– Energy efficient LED lighting
– Low energy condensing units
– Low energy evaporators
– Low G.W.P. foam insulation
– 98% recyclable
– Ultra coldstores incorporate a range of eco-friendly components and features designed to reduce your energy costs
– 2 year warranty
Advantage + Coldstores
ADV+1515HT INT
ADV+1515HT REM
ADV+1515LT INT
ADV+1515LT REM
ADV+1818HT INT
ADV+1818HT REM
ADV+1818LT INT
ADV+1818LT REM
ADV+2121HT INT
ADV+2121HT REM
ADV+2121LT INT
ADV+2121LT REM
1500 x 1500 x 2100mm
1500 x 1500 x 2100mm
1500 x 1500 x 2100mm
1500 x 1500 x 2100mm
1800 x 1800 x 2100mm
1800 x 1800 x 2100mm
1800 x 1800 x 2100mm
1800 x 1800 x 2100mm
2100 x 2100 x 2100mm
2100 x 2100 x 2100mm
2100 x 2100 x 2100mm 2100 x 2100 x 2100mm
R452a
R452a
R452a
R452a
R452a
R452a
R452a
R452a
R452a
R452a
R452a
R452a
£9,926
£14,427
£12,368
£17,040
£10,042
£14,549
£12,697
£16,652
£11,051
£15,242
£14,005
£18,234
+ £541
+ £541
+ £541
+ £541
+ £836
+ £836
+ £836
+ £836
– 6 optimised coldstore sizes
– Competitive fixed price
– Available in either chiller (+1/+4˚C) or freezer (-18/-21˚C) temperatures
– 75mm foodsafe laminate interior and exterior hygienic finish
– Standard room height of 2100mm
– Floorless chillers, heavy duty floors on freezers as std
– Complete with LED light as standard
– Integral refrigeration system with 32˚C ambient operating temperature
– Remote or integral refrigeration system options
+ £859
+ £859
+ £859
+ £859
– Remote option includes condensing units for remote application installed up to 15 metres remote from the room. Supplied complete with weather-proof housing and brackets.
– Project management included
– Shelving options available
– Free site survey on receipt of order
ADV+2424HT INT
ADV+2424HT REM
ADV+2424LT INT
ADV+2424LT REM
ADV+3030HT INT
ADV+3030HT REM
ADV+3030LT INT
ADV+3030LT REM
2400 x 2400 x 2100mm
2400 x 2400 x 2100mm
2400 x 2400 x 2100mm
2400 x 2400 x 2100mm
3000 x 3000 x 2100mm
3000 x 3000 x 2100mm
3000 x 3000 x 2100mm
3000 x 3000 x 2100mm
ADV+3624HT INT
ADV+3624HT REM
ADV+3624LT INT
ADV+3624LT REM
3600 x 2400 x 2100mm
3600 x 2400 x 2100mm
3600 x 2400 x 2100mm
3600 x 2400 x 2100mm
R452a
R452a
R452a
R452a
R452a
R452a
R452a
R452a
R452a
R452a
R452a
R452a
£11,326
£15,607
£14,495
£18,719
£13,812
£17,352
£19,934
£22,088
£13,602
£17,142
£19,120
£22,857
+ £1,185
+ £1,185
+ £1,185
+ £1,185
+ £1,628
+ £1,628
+ £1,628
+ £1,628
+ £1,453
+ £1,453
+ £1,453
+ £1,453
– Delivered, installed and commissioned by Foster Coldstores technicians
– 12 month warranty as standard
– Manufactured in the UK
Advantage + Refrigeration Plant options
– Integral Refrigeration
Wall mounted integral refrigeration system with fully programmable control panel and tough, hygienic construction
– Remote Refrigeration
Fully packaged refrigeration system, includes Foster unit coolers, split system flexibility, easy remote operation and high/low temperature alarm
Bespoke Coldstores
Ideal where space is at a premium, Bespoke Coldrooms are designed to maximise the available site space allowing you a fully flexible solution
Fast and accurate quotations from the Coldstores sales team
Full project management / site survey
Installation supervised by Foster Coldstores experienced personnel from start to finish
Back up service support from UK based manufacturer offering nationwide coverage
12 months warranty with 24/7 service desk coverage and dedicated service line 0843 216 4888
Refrigeration types available to suit any application
Most reliable form of walk in refrigeration
Lowest capital cost
Lowest energy consumption
Removes heat from the area
Removes noise externally
Quicker temperature recovery
Fully packaged remote refrigeration system includes Foster unit coolers, split system flexibility, easy remote operation and hi/low temperature alarms.
Shelving & Racking
Clever racking design increases usable capacity by up to 24%
A versatile range available with a wide range of options including anodised aluminium, stainless steel, nylon coated and chrome finishes, and solid, slatted, perforated and wire formats. Mobile shelving is also available.
Ali-poly
Nylon Wire
Ultra range
The Foster Coldstores Ultra range of tailor-made coldrooms represents the pinnacle in environmentally-friendly walk in refrigeration. The Ultra coldrooms are infinitely adaptable and utterly foodsafe. This range has been designed with operator use, energy, and performance in mind ensuring all aspects of the coldroom suit the operation and energy goals of the client. The latest technology has been designed into the Ultra range providing unrivalled performance.
Ultra low energy coldrooms saving up to 30% in energy costs vs. industry standard
Designed and manufactured in the UK and built to last in the hardest working environments
Low transport carbon footprint
Low energy LED lighting
Low energy evaporators
Energy-efficient insulated door curtains
98% recyclable
100mm high density foam insulated panels (43kgm3)
100mm door insulation for energy efficiency
Semi rebate, positive sealing doors
Door closure assist devices
Optional door open alarm
Optional foamed in micro switches
Fully customisable bespoke coldstores available.
Get in touch on 0843 216 4710 to discuss options.
Low Energy Evaporators: By using EC fan motors, we have been able to increase efficiency from lower power usage. The additional benefit is a reduction in heat generated within the room.
Door closure assist device
Insulated door curtain
General notes
Spares
Once a product has been purchased any spares required can be purchased from the Foster and Gamko Spares Department. Call +44 (0)1553 780300
Packing / Crating
Standard specifications on all products - shrinkwrap.
Images relating to specification
All images and / or photographs shown are for illustration purpose only. All images and photographs are not intended to be relied upon for, nor to form part of, any contract unless specifically incorporated in writing into the contract. Solely the dimensions and specifications incorporated in the quotation or purchase order confirmation shall be contractually binding.
Notes
We reserve the right to change specifications without notice. By using the prices within this publication you are accepting Foster Refrigerator's standard terms and conditions, a copy of which can be viewed at www.fosterrefrigerator.com/terms
Foster Warranty Policy
- Please note that Foster Refrigerator’s standard warranty periods apply, a copy of which can be viewed at: www.fosterrefrigerator.com/warrantypolicy
- EXTENDED WARRANTY
If you wish to upgrade or extend your warranty package, Foster offer a range of options from enhanced service packages to full labour cover.
Please call: +44 (0)1553 691122 or email service@foster-gamko.com
Cabinets and Integral Products
- SITE ACCESS
We recommend that site access and position is checked for all products prior to delivery and installation. This is particularly important on 2 section cabinets and 2, 3, and 4 door counter models.
- DELIVERY
For delivery services and charges please see page 96
Remote Reach In models
- Prices for standard integral units include the supply of condensing unit(s), valves and controls. These units are self contained and are ready for installation on delivery.
- Prices for “less condensing unit or remote models” include the fitting of expansion valves, thermostats and time-clocks as well as the provision of sealed liquid and suction line pipes terminated in the ‘unit compartment’. Prices do not include condensing unit or any installation.
NOTE: Condensing units must not be installed on top of remote cabinets – some additional stressing has to be built into a cabinet to withstand the weight of a top-mounted unit.
IMPORTANT! Appliances must be positioned in well ventilated areas permitting constant free flow of air to the condensing unit, not exceeding specified ambient temperature. Condensers must be cleaned as and when required to allow sufficient air flow. The frequency will be dependent on site conditions.
Trolley Loading and Modular Products
- INSTALLATION
Modular products are supplied with a panel plan and installation guidelines. NB. Modular products must be installed on a clear, flat, level, smooth and hard base.
- RECESSED FLOORS
Where floors, perimeter walls, or screeds are to be recessed for flush entry, a relevant recess depth from finished floor level should be provided. Please specify/indicate ‘recessed floor’ and ‘wiper gasket door’ requirements on order instructions.
- SITE ACCESS
We recommend that site access is checked to ensure that products, particularly modular panels, can be manoeuvred to the point of installation.
- HEAVY DUTY APPLICATION
We recommend the use of appropriate wall protection and/or floor reinforcing/insitu floors for any uses other than pedestrian/light trolley. Please contact the sales office for details.
- DELIVERY & ERECTION
See relevant charges for Modular Blast Chillers and Chiller/Freezers. For other products please contact +44 (0)1553 691122.
ZERO% Interest Free Credit
- ZERO% Interest Free Credit is not available on Modular Coldstores.
Delivery notes
(Note all prices are list, per product unless otherwise stated)
Standard Delivery
UK Mainland: England & Wales. Scotland**
Delivery to highlands & islands £POA Northern Ireland & Republic of Ireland £POA
2-5 working days from time of order* If delivery is required in 2 working days, orders must be received before 1pm. (Scotland: 3-7 working days from time of order*)
UK Mainland: England & Wales.
Scotland**
Timed Delivery
UK Mainland: England & Wales.
(Scotland & Scottish highlands & islands £POA)
Delivered, Installed & Set To Work
UK Mainland: England & Wales.
(Scotland & Scottish highlands & islands £POA)
Next Day
Order instructions must be received by 15:30
As per standard lead times
As per standard lead times
Delivery 8am-5pm Monday to Friday
Delivery 8am-6pm Monday to Friday
Timed delivery services are available in combination with SOS free next day delivery as follows:
Additional charge of £200 for timed delivery only am/pm per product
Additional charge of £240 for specific timed delivery only per product (Prices are list)
Delivery 8am-5pm Monday to Friday. Please allow +/- 45 minutes of specified time. Timed requests relate to vehicle arrival. Any specified time within 8am-5pm window is chargeable. Out of hours and weekend timed deliveries available as £POA.
Delivery 8am-5pm Monday to Friday
£303 (per consignment)
£375 (per consignment)
£467 (per consignment)
All delivery vehicles are equipped with a two-man crew, tail lift and stair-walker. Product(s) will be delivered & placed over the threshold where possible. This is based on ground floor site with clear access (between road and dealer premises/customer site e.g. no double lines, no vehicle restrictions etc. and no steps or stairs, no obstacles or insufficiently wide or tall doorways). Product must be located without additional equipment or site modifications. The time taken to expedite the delivery should take no more than 30 minutes from arriving at site, any longer due to site restrictions/delays could result in an aborted delivery and associated charges being applied.
Full SOS terms and conditions can be found at www.fosterrefrigerator.com/sos
Please contact us for details of installation services pricing.
Please check that route through building is sufficient for the dimensions of the product being delivered. Installation services based on ground floor site with clear access to the final installation position: no steps or stairs (unless stated as non ground floor as specified above), no obstacles e.g. insufficiently wide or tall doorways, and product can be located without additional equipment or site modifications. Includes unpacking, removal of packaging, placement, installation of fittings, connection by 3 pin plug to a standard 230v supply within 2 metres and start up at the time of delivery. No electrical or plumbing work included. Installation & set to work deliveries not available on any 16/20 amp 1 phase and 3 phase products requiring electrical work, or any products requiring plumbing.
IMPORTANT: Terms referring to all services **Standard delivery to Scotland excludes next day service. For highlands & islands, and for all other delivery services £POA. A pre-delivery phone call will be scheduled to book in and confirm acceptance of the delivery and identification of any known or new delivery constraints. Standard delivery is an 18 tonne lorry (approximate equivalent size of a double decker bus) with a two-man crew, tail lift and stair-walker. It is your responsibility to ensure we are made aware of any delivery restrictions prior to undertaking the delivery and these issues may include, but are not limited to, access to the location (low bridges/tight streets) and site access (building site, uneven ground, steps into the building, double yellow lines). Please check that route through building is sufficient for the dimensions of the product being delivered. The contact details provided should be for persons that are on site or have full understanding of the external and internal constraints at the intended delivery location. Aborted charges will be made if delivery is not possible due to access, site or other restrictions previously not identified. All products will be shipped on pallets, however these will be removed on delivery for all products supplied with pre-fitted castors, unless listed below. This includes: XTRA, Slimline, blast chillers, undercounters, FlexDrawer, low level counters, heated cabinets, and selected G3 (exclusions listed below). This excludes: Above cabinets fitted with legs/levelling bolts (incl. remotes), all Modular products, Roll-ins, Prep Stations, Pan Chillers, Ice Machines, all Gamko products, Drinking Water Coolers, Chest Freezers, Thaw cabinets, Fish cabinets, Dual Temperature cabinets, Bakery cabinets and Multidecks/Display. Delivery services (excluding installation) will aim to get the cabinets over the threshold and/or to a covered point in the building of choice (not the point of installation) provided there is clear and level hard surface access. This does not include negotiating stairs or other obstructions. Services provided subject to product and transport availability. *Please note the delivery services for the following products are covered on the relevant pages: Modular MBC’s/MBCF’s and GRL. Any other delivery services (including disposal) £POA. †Product Delivery Category identified on relevant product page via symbol. Any prices for delivered installed and set to work in our product sections will overide those above.
Timed Delivery,
Delivered, Installed & Set To Work Non Ground Floor
Installed & Set To Work
UK Mainland:
England & Wales.
(Scotland & Scottish highlands & islands £POA)
Delivered, Installed & Set To Work Non-standard
UK Mainland: England & Wales.
(Scotland & Scottish highlands & islands £POA)
Collection
UK Mainland: England & Wales.
(Scotland & Scottish highlands & islands £POA)
Aborted Services
Access/Special Deliveries
UK Mainland: England & Wales.
UK Mainland: England & Wales.
As per standard lead times
As per standard lead times
As per standard lead times
Delivery 8am-5pm Monday to Friday. Please allow +/- 45 minutes of specified time. Timed requests relate to vehicle arrival. Any specified time within 8am5pm window is chargeable. Out of hours and weekend timed deliveries available as £POA.
Delivery 8am-5pm Monday to Friday
8am-5pm Monday to Friday
£424
£510
£637
£POA - subject to site survey
£POA - subject to site survey
£POA - subject to site survey
Please check that route through building is sufficient for the dimensions of the product being delivered. Installation services based on ground floor site with clear access to the final installation position: no steps or stairs (unless stated as non ground floor as specified above), no obstacles e.g. insufficiently wide or tall doorways, and product can be located without additional equipment or site modifications. Includes unpacking, removal of packaging, placement, installation of fittings, connection by 3 pin plug to a standard 230v supply within 2 metres and start up at the time of delivery. No electrical or plumbing work included. Installation & set to work deliveries not available on any 16/20 amp 1 phase and 3 phase products requiring electrical work, or any products requiring plumbing.
OUR PROMISE: In the unlikely event that we are unable to carry out the delivery services for reasons within our control, a full refund of all associated charges will be given
Transport of old product whilst delivering new product in line with the WEEE Directive. Product being collected must be the same size as replacement, and be located on the ground floor with clear access, otherwise additional charges will apply. Please contact us for further information. Products must be disconnected, clean and empty and in a safe condition at time of collection. Collection with tail lift, from a suitable point on customer's premises - based on ground floor site with clear access (between road and dealer premises/customer site e.g. no double lines, no vehicle restrictions etc. and no steps or stairs, no obstacles or insufficiently wide or tall doorways). Product can be located without additional equipment or site modifications.
(Scotland & Scottish highlands & islands £POA) ––
(Scotland & Scottish highlands & islands £POA) ––
£250 minimum charge applies
£POA
£POA
£POA
For aborted services a recovery of distribution costs applies. Postponement or cancellation of delivery and collection, or installation services may result in a cancellation charge. Rearranged services will be priced on application. Charges will be applied if cancellation is made within 2 working days before a requested date.
Applies to restricted access for products, special delivery vehicles eg. where access is restricted needing 7.5 tonne or smaller vehicle, deliveries outside standard delivery times, weekends or Bank Holidays, same day delivery. If you are unsure as to what delivery services your site requires, please call us to discuss.
gamko.com
Gamko Sales Tel: +44 (0)1553 780336
Email: sales@foster-gamko.com
Key Accounts Sales Tel: +44 (0)1553 698467
Email: keyaccount@foster-gamko.com
Regional Sales Tel: +44 (0)1553 698485
Email: sales@foster-gamko.com
Export Direct Tel: +44 (0)1553 780500
Email: export@foster-gamko.com
Product Support Tel: +44 (0)1553 780400
Email: support@foster-gamko.com
Service Tel: +44 (0)1553 780333
Email: service.uk@foster-gamko.com
Spares Tel: +44 (0)1553 780300
Email: parts@foster-gamko.com
Marketing Tel: +44 (0)1553 698374
Email: marketing@foster-gamko.com
Credit Control Tel: +44 (0)1553 698482
Email: creditcontrol@foster-uk.com
Other Departments Tel: +44 (0)1553 691122
Email: info@foster-gamko.com
Chill more. See more. Save more.
With almost 10% greater capacity and up to 30% energy savings on our previous Maxiglass range, the MG3 is now available with all that you would expect, and more.
Maximum presentation, minimum power consumption. Available in 3 heights, multiple widths and with hinged or sliding doors, meaning there’s a Maxiglass to suit every need.
Superior storage capacity in its class. The MG3 range can store between 143 and 480 bottles!
Efficient dimmable LED lighting with even light distribution to show the drinks in a really appealing light, inspiring impulse purchases.
Upgraded low maintenance condenser design reduces the need to clean, and means your product doesn’t have to work as hard.
Top mounted doors locks as standard for keeping your contents safe and secure.
Maxiglass – Standard height
solid door
MG3/150RG
MG3/150LG
MG3/150RGCS
MG3/150LGCS
MG3/150R
MG3/150L
MG3/150RCS MG3/150LCS
MG3/275SD
MG3/275
MG3/275CS
Maxiglass – Low height
Products available – at a glance +6°C (adjustable
LG3/150RG
LG3/150LG
LG3/150RGCS
LG3/150LGCS
LG3/150R
LG3/150LG
LG3/150RCS LG3/150LCS
Maxiglass comes with dimmable, white, vertical LED lighting, door locks as standard, auto defrost and adjustable shelving!
LG3/250SD
LG3/315G
SELLER
LG3/150CS
Maxiglass Tall - 300 litre capacity
Maxiglass Tall - 500 litre capacity
Anthracite glass door
Anthracite glass door
steel frame, anthracite body
The Bottle Cooler
Enhanced storage capacity, superb energy efficiency
Ground breaking capacity and exceptionally low energy is the backbone of our E3 range, whilst also boasting a fantastic display area with a sleek, stylish look – perfect for both your front and back bars.
TotalChill technology means there are no ‘hot spots’ so all bottles and kegs are cooled equally, and customers are consistently served cold drinks.
Superior storage capacity of up to 722 bottles –making ‘bottling up’ more efficient for bar staff and faster service.
One 3 door E3 can hold 127 more bottles than TWO standard format bottle coolers, and all on a smaller footprint!
Reduced energy usage – over 60% more energy efficient than our previous range meaning you aren’t just saving money, you’re also investing in an environmentally responsible product.
Vertical, dimmable white LED lighting shows drinks in a really appealing light, inspiring impulse purchases.
Powerful refrigeration system means you can fill the E3 up and drinks are at the right temperature for the next shift.
Add drawers to your E3 bottle cooler and you will not only create a practical bar layout, but also a sleek and ergonomic one!
E3 - Plug ready and remote
Products available – at a glance (adjustable temp range +2˚C/+18˚C)
E3/22MU84 solid doors
E3/22MUCS84 solid doors
E3/22VS84 solid doors, remote
E3/22VSCS84 solid doors, remote
E3/22GMU84 glass doors
E3/22GMUCS84 glass doors
E3/22GVS84 glass doors, remote
E3/22GVSCS84 glass doors, remote
Anthracite skin plate ext/ silver coloured skin plate int
s/s ext/silver coloured skin plate int
Anthracite skin plate ext/silver coloured skin plate int
s/s ext/silver coloured skin plate int
Anthracite skin plate ext/silver coloured skin plate int
s/s ext/silver coloured skin plate int
Anthracite skin plate ext/silver coloured skin plate int
s/s
coloured skin plate int
E3/222MU84 solid doors
E3/222MUCS84 solid doors
E3/222VS84 solid doors, remote
E3/222VSCS84 solid doors, remote
E3/222GMU84 glass doors
E3/222GMUCS84 glass doors
E3/222GVS84 glass doors, remote
E3/222GVSCS84 glass doors, remote
Anthracite skin plate ext/silver coloured skin plate int
s/s ext/silver coloured skin plate int
Anthracite skin plate ext/silver coloured skin plate int
s/s ext/silver coloured skin plate int
Anthracite skin plate ext/silver coloured skin plate int
s/s ext/silver coloured skin plate int Anthracite skin plate ext/silver coloured skin plate int s/s ext/silver coloured skin plate int
Anthracite / glass door
Anthracite / Solid door
BEST SELLER
E3 Plug ready and remote
Product Finish Refrigerant List Price
E3/2222MU84 solid doors
E3/2222MUCS84 solid doors
E3/2222VS84 solid doors, remote
E3/2222VSCS84 solid doors, remote
E3/2222GMU84 glass doors
E3/2222GMUCS84 glass doors
E3/2222GVS84 glass doors, remote
s/s ext/silver coloured skin plate int
Anthracite skin plate ext/silver coloured skin plate int
s/s ext/silver coloured skin plate int
E3/2222GVSCS84 glass doors, remote Anthracite skin plate ext/silver coloured skin plate int s/s ext/silver coloured skin plate int Anthracite skin plate ext/silver coloured skin plate int
Add drawers to your E3 bottle cooler and you will not only create a practical, but also a sleek and ergonomic bar layout. Replace solid doors with a solid drawer unit consisting of 2 or 3 drawers of equal height or 2 unequal drawers.
E3/2222 (728 litre capacity)
Anthracite
Anthracite
Flexbar
Design your new bar just the way you want it.
Our Flexbar allows you to have greater flexibility and choice. Whether you want a straight, round or curved bar, pass through segments or barista station, our experts can design your bespoke bar layout.
Over 140 modules to choose from, meaning that we can help you create your dream bar, unique to you. The options are endless, with different finishes, four temperature zones, drawers or doors!
Specialist designers create free bespoke drawings based on your specifications, so you can see your design come to life.
Our highly experienced team will be with you every step of the way, managing the project so you don’t have to.
Easy to assemble camlock system – reduces installation time so you can start using your Flexbar straight away.
Central electronic locking system (CELS) for securing the bar at the end of a shift.
Coloured and white LED lighting – creates a unique atmosphereyou can even sync this to your sound system.
Creating your perfect bar in 5 simple steps
Follow our 5 easy steps to design a unique bar tailored to your space.
Step 1. Choose your design – with Flexbar, you can have straight, curved or custom
Step 2. Select your machine unit, spec and finish –do you want remote or integral? LED lights and our CELS locking system? Anthracite or stainless steel? Click here.
Step 3. Add your refrigerated storage segments –choose between doors or drawers. Click here.
Step 4. Enhance your design with the finishing touches –endless customisation includes ambient storage, counter top coolers, glass frosters, barista and cocktail stations. Click here.
Step 5. Send your sketch or wish list to us –we’ll design and price your dream bar. Click here. Scroll down to start creating!
Straight
Curved Custom
2 – Pick your integral or remote machine unit
Integral and remote machine units are the heart of a Flexbar configuration. The storage segments must be linked to the machine unit to operate. Each machine unit can cool up to 4 storage segments. General characteristics: Electronic thermostat with display; capacity machine segments: 440 W (optimum) - automatic defrost/evaporation leak water - Height adjustable legs - Easy to maintain (service friendly) - Prepared for python pipeTemperature: +4° C / +8° C
Integral Machine Units
Remote Machine Units
Anthracite
Flexbar
Step 3 – Add your refrigerated storage segments +4˚C/+8˚C (adjustable range +2˚C/+18˚C)
These Flexbar storage segments join with an integral or remote machine unit (see page 13) to form a refrigerated counter arrangement. Available with doors and drawers, 2 adjustable shelves as standard per door, and 2 dividers as standard per drawer.
Glass Front
X/2LGN41
X/2RGN41
X/3DGN41
hinged door
x right hinged door
x 1/2 drawer
drawer & 7/12 drawer
X/6DGN54
Anthracite Solid Front
X/2A
Step 4 – Enhance your design with the finishing touches
Endless customisation includes counter top coolers, glass frosters, barista and cocktail stations.
Counter top coolers and freezers
A plug ready range of stainless steel coolers and freezers for bottles that can be inset or surface mounted. Perfect for serving refrigerated wines, liqueurs or vodka per glass rapidly at a fixed cold temperature. Counter top coolers & freezers are available in 4 options: with a maximum capacity of 10 to 12 bottles of 1 litre and suitable as a cooler or as a freezer. The VKHC/10 model can be built-in or built-on to the worktop and has a maximum capacity of 10 bottles. The VKHC/12 model has been developed to be built into the work top and has a capacity of 12 bottles.
Cooler temperature: +4° C / +8° C. Adjustable temperature range from 0° C to +10° C. Freezer temperature: -8° C / -12° C. Adjustable temperature range from 0° C to -15° C.
And
don’t forget...
Ambient segments, coffee knock out drawers and heated segments are also available, perfectly engineered for Baristas.
Stand alone glass frosters
A plug ready stand alone glass froster can be added to the Flexbar configuration. With this stand alone segment it is possible to create a different temperature zone within the total bar configuration. The Flexbar stand alone glass froster features the award winning +stayclear condenser in its efficient and powerful cooling system.
Anthracite glass front with adjustable LED lighting
Anthracite solid front
XF/100SN
4 – Enhance your design with the finishing touches
Endless customisation includes counter top coolers, glass frosters, Barista and cocktail stations.
Cocktail Stations
X/ACSP54 - X/ACSP41
X/ACP108 - X/ACP82
X/ACPXL54 - X/ACPXL41
insulated bowl for ice or bottles, build-in 54-segment, incl. drainage
insulated bowl for ice or bottles, build-in 41-segment, incl. drainage
speed rail for single 54-segment
speed rail for single 41-segment
speed rail for double 54-segment
speed rail for double 41-segment
XL speed rail for single 54-segment
XL speed rail for single 41-segment
slide top cover for X/ACIICE54
slide top cover for X/ACIICE41
bottle rack for X/ACIICE54
bottle rack for X/ACIICE41
rack for Gastro 1/6 bowls (bowls included)
X/ACIICE54
X/ACIICE41
X/ACSP54
X/ACSP41
X/ACSP108
X/ACSP82
X/ACSPXL54
FLEXBAR OPTIONS
Solid metal shelf for 54-segment X /ACSH54 +£54
Solid metal shelf for 41-segment X /ACSH41 +£50
shelf bracket (4 items required) 013010001 +£4
raised side edge for shelf X /ACSB +£36
reinforced bottom for keg storage 54-segment X /ACKR54 +£138
reinforced bottom for keg storage 41-segment X /ACKR41 +£126
X/ACIICE41 - X/ACIICE54
Insulated bowl
X/ACTRAY
Gastro rack
Step 5 – Send your sketch or wish list to us and we’ll design and price your dream bar
Our successful projects across the globe have given us the deserved reputation of being the expert in total bar solutions. Working with you, we can design a complete bar to aid the success of your business and set you apart from your competitors.
Making your ideas a reality
To us, it is more than just which refrigeration suits your needs, but whether that solution is technically sound. We take into account ergonomics, the environment, maintenance and energy savings to make sure our design is the best solution for you. We also take the overall routing of the bar into consideration before giving you our advice.
Contact us and arrange for your idea, wish list or rough sketch to be professionally drawn up by our project team without obligation and free of charge, so you can be sure that you aren’t forgetting anything and all of your ideas can be implemented down to the last detail. Don’t hesitate to ask for the Flexbar check list, where you can make a list of all your preferences and requirements yourself, or in partnership with our experts!
Call us today on +44 (0)1553 780437 to start the process of making your dream bar a reality!
Flexbar
– your bar, your way
Our Flexbar allows you to have greater flexibility and choice. Whether you want a straight, curved or custom bar, pass through segments or barista station, our experts can design your bespoke bar layout.
Watch our video to find out more!
Curved Flexbar
Special insulated corner pieces are used when building a round or curved Flexbar configuration to allow the cold air through, and are precisely custom-made to the desired radius.
Flexbar eQuip
eQuip your bar with unique graphics to blend in or to stand out.
Pass throughs
Gamko have created pass through segments (with a door either side) so that the bar can be served from 2 sides. This means that the bar is used more creatively and functionally.
Plug ready glass frosters
Products available – at a glance (temp range -14˚/-10˚C)
Anthracite / solid door
Stainless steel front / solid door
Anthracite / glass door Stainless steel front / glass door
Plug ready under counter keg coolers
Products available – at a glance (adjustable range 0/+7°C)
These models can be fitted under a tap and python lines can be inserted on models with machine units on right and left.
Modular keg coolers
Products available – at a glance (adjustable range +1/+18°C)
Panel
Panel
General notes
Spares
Once a product has been purchased any spares required can be purchased from the Foster and Gamko Spares Department. Call +44 (0)1553 780300
Images relating to specification
All images and / or photographs shown are for illustration purpose only. All images and photographs are not intended to be relied upon for, nor to form part of, any contract unless specifically incorporated in writing into the contract. Solely the dimensions and specifications incorporated in the quotation or purchase order confirmation shall be contractually binding.
Notes
We reserve the right to change specifications without notice. By using the prices within this publication you are accepting Gamko's standard terms and conditions, a copy of which can be viewed at www.gamko.com/terms
Gamko Warranty Policy
- STANDARD WARRANTY
24 months parts and labour with an additional 12 months parts only.
Integral Products
- SITE ACCESS
We recommend that site access and position is checked for all products prior to delivery and installation.
- DELIVERY
For delivery services and charges please see page 27.
Remote models
- Prices for integral units include the supply of condensing unit(s), valves and controls. These units are self contained and are ready for installation on delivery.
- Prices for “remote models” include the fitting of expansion valves, thermostats as well as the provision of sealed liquid and suction line pipes terminated in the ‘unit compartment’. Prices do not include condensing unit.
NOTE: Condensing units must not be installed on top of remote cabinets – some additional stressing has to be built into a cabinet to withstand the weight of a top-mounted unit.
IMPORTANT! Appliances must be positioned in well ventilated areas permitting constant free flow of air to the condensing unit, not exceeding specified ambient temperature. Condensers must be cleaned as and when required to allow suficient air flow. The frequency will be dependent on site conditions.
Modular Products
- INSTALLATION
Modular products are supplied with a panel plan and installation guidelines. NB. Modular products must be installed on a clear, flat, level, smooth and hard base.
- SITE ACCESS
We recommend that site access is checked to ensure that products, particularly modular panels, can be manoeuvred to the point of installation.
- DELIVERY & ERECTION
Please contact sales: +44 (0)1553 780437.
Our award-winning condenser –revolutionising the efficiency of refrigeration
Fitted to our most popular Glass froster and Foster G3, Slimline and EcoShow ranges as standard
Reduces maintenance costs and customer site disruption
Helps to maintain more reliable temperature control improving food safety
Equipment lasts longer
Increased carbon reduction through lower energy use
(Note all prices are list, per product unless otherwise stated)
Standard Delivery
UK Mainland: England & Wales.
Scotland**
Delivery to highlands & islands £POA Northern Ireland & Republic of Ireland £POA
Timed Delivery
UK Mainland: England & Wales.
(Scotland & Scottish highlands & islands £POA)
Delivered, Installed & Set To Work
UK Mainland: England & Wales.
(Scotland & Scottish highlands & islands £POA)
2-5 working days from time of order* If delivery is required in 2 working days, orders must be received before 1pm. (Scotland: 3-7 working days from time of order*)
As per standard lead times
Delivery 8am-5pm Monday to Friday
Delivery 8am-5pm Monday to Friday. Please allow +/- 45 minutes of specified time. Timed requests relate to vehicle arrival. Any specified time within 8am-5pm window is chargeable. Out of hours and weekend timed deliveries available as £POA.
As per standard lead times
Delivery 8am-5pm Monday to Friday
£303 (per consignment)
£375 (per consignment)
£467 (per consignment)
All delivery vehicles are equipped with a two-man crew, tail lift and stair-walker. Product(s) will be delivered & placed over the threshold where possible. This is based on ground floor site with clear access (between road and dealer premises/ customer site e.g. no double lines, no vehicle restrictions etc. and no steps or stairs, no obstacles or insufficiently wide or tall doorways). Product must be located without additional equipment or site modifications. The time taken to expedite the delivery should take no more than 30 minutes from arriving at site, any longer due to site restrictions/delays could result in an aborted delivery and associated charges being applied.
£316
£386
£522
Please check that route through building is sufficient for the dimensions of the product being delivered. Installation services based on ground floor site with clear access to the final installation position: no steps or stairs (unless stated as non ground floor as specified above), no obstacles e.g. insufficiently wide or tall doorways, and product can be located without additional equipment or site modifications. Includes unpacking, removal of packaging, placement, installation of fittings, connection by 3 pin plug to a standard 230v supply within 2 metres and start up at the time of delivery. No electrical or plumbing work included. Installation & set to work deliveries not available on any 16/20 amp 1 phase and 3 phase products requiring electrical work, or any products requiring plumbing.
IMPORTANT: Terms referring to all services **Standard delivery to Scotland excludes next day service. For highlands & islands, and for all other delivery services £POA. A pre-delivery phone call will be scheduled to book in and confirm acceptance of the delivery and identification of any known or new delivery constraints. Standard delivery is an 18 tonne lorry (approximate equivalent size of a double decker bus) with a two-man crew, tail lift and stair-walker. It is your responsibility to ensure we are made aware of any delivery restrictions prior to undertaking the delivery and these issues may include, but are not limited to, access to the location (low bridges/tight streets) and site access (building site, uneven ground, steps into the building, double yellow lines). Please check that route through building is sufficient for the dimensions of the product being delivered. The contact details provided should be for persons that are on site or have full understanding of the external and internal constraints at the intended delivery location. Aborted charges will be made if delivery is not possible due to access, site or other restrictions previously not identified. All products will be shipped on pallets, however these will be removed on delivery for all products supplied with pre-fitted castors, unless listed below. This includes: XTRA, Slimline, blast chillers, undercounters, FlexDrawer, low level counters, heated cabinets, and selected G3 (exclusions listed below). This excludes: Above cabinets fitted with legs/levelling bolts (incl. remotes), all Modular products, Roll-ins, Prep Stations, Pan Chillers, Ice Machines, all Gamko products, Drinking Water Coolers, Chest Freezers, Thaw cabinets, Fish cabinets, Dual Temperature cabinets, Bakery cabinets and Multidecks/Display. Delivery services (excluding installation) will aim to get the cabinets over the threshold and/or to a covered point in the building of choice (not the point of installation) provided there is clear and level hard surface access. This does not include negotiating stairs or other obstructions. Services provided subject to product and transport availability. *Please note the delivery services for the following products are covered on the relevant pages: Modular MBC’s/MBCF’s and GRL. Any other delivery services (including disposal) £POA. †Product Delivery Category identified on relevant product page via symbol. Any prices for delivered installed and set to work in our product sections will overide those above.
Delivered, Installed & Set To Work Non Ground Floor
Timed Delivery, Installed & Set To Work
UK Mainland: England & Wales.
(Scotland & Scottish highlands & islands £POA)
Delivered, Installed & Set To Work Non-standard
UK Mainland: England & Wales.
(Scotland & Scottish highlands & islands £POA)
Collection
UK
(Scotland & Scottish highlands & islands £POA)
Aborted Services
UK Mainland: England & Wales.
(Scotland & Scottish highlands & islands £POA)
Access/Special Deliveries
UK Mainland: England & Wales.
(Scotland & Scottish highlands & islands £POA)
As per standard lead times
As per standard lead times
As per standard lead times
Delivery 8am-5pm Monday to Friday. Please allow +/- 45 minutes of specified time. Timed requests relate to vehicle arrival. Any specified time within 8am5pm window is chargeable. Out of hours and weekend timed deliveries available as £POA.
Delivery 8am-5pm Monday to Friday
8am-5pm Monday to Friday
£424
£510
£637
£POA - subject to site survey
£POA - subject to site survey
£POA - subject to site survey
Please check that route through building is sufficient for the dimensions of the product being delivered. Installation services based on ground floor site with clear access to the final installation position: no steps or stairs (unless stated as non ground floor as specified above), no obstacles e.g. insufficiently wide or tall doorways, and product can be located without additional equipment or site modifications. Includes unpacking, removal of packaging, placement, installation of fittings, connection by 3 pin plug to a standard 230v supply within 2 metres and start up at the time of delivery. No electrical or plumbing work included. Installation & set to work deliveries not available on any 16/20 amp 1 phase and 3 phase products requiring electrical work, or any products requiring plumbing.
OUR PROMISE: In the unlikely event that we are unable to carry out the delivery services for reasons within our control, a full refund of all associated charges will be given
Transport of old product whilst delivering new product in line with the WEEE Directive. Product being collected must be the same size as replacement, and be located on the ground floor with clear access, otherwise additional charges will apply. Please contact us for further information. Products must be disconnected, clean and empty and in a safe condition at time of collection. Collection with tail lift, from a suitable point on customer's premises - based on ground floor site with clear access (between road and dealer premises/customer site e.g. no double lines, no vehicle restrictions etc. and no steps or stairs, no obstacles or insufficiently wide or tall doorways). Product can be located without additional equipment or site modifications.
––
––
£250 minimum charge applies
£POA
£POA
£POA
For aborted services a recovery of distribution costs applies. Postponement or cancellation of delivery and collection, or installation services may result in a cancellation charge. Rearranged services will be priced on application. Charges will be applied if cancellation is made within 2 working days before a requested date.
Applies to restricted access for products, special delivery vehicles eg. where access is restricted needing 7.5 tonne or smaller vehicle, deliveries outside standard delivery times, weekends or Bank Holidays, same day delivery. If you are unsure as to what delivery services your site requires, please call us to discuss.
