TURNING/MILLTURN
JX-200 – ATC Multi-tasking machine:
Ultra-modern 6 to 8” chuck, twin spindle multitasking machine. With tool spindle and lower turret equipped with a standard Y-Axis featuring the “NT Smart Cube”, the shortest tool spindle in its class.
See this machine in action
• ATC tool spindle motor 15/11kW
• Tool spindle speed 12,000min -1 (op. 18,000 min -1)
• Number ATC tools: 80 (op. 40, 120)
• 5.5/3.7kW milling power on the lower turret
NTRX-300 ATC multi-tasking machine:
The latest 8 / 10” machine secures a wide machining area of 250mm square in the centre of the spindle, enabling high precision milling on the face over a wide range.
• Lower turret milling rotation speed 6,000min -1 (op.8,000min -1)
• Simultaneous Y-Axis vertical machining
turning dia. (tool spindle/lower turret)
turning length
between spindles
• Selecatble from R-spindle or tailstock
• ATC tool spindle motor 22/15 kW
• Tool Spindle Speed 8,000 min -1 (op. 12,000 min -1)
• Number ATC tools: 40 (op. 60, 80, 120)
• X-axis travel below spindle centre is 125 mm
• Y-axis travel is +/- 125mm from spindle centre
NTY3-150 - Triple turret machine:
State of the art multi-tasking machine. 3 turrets, 3 Y-axes, finished parts, complete in one setup, enabling optimum cycle times, less set up time, simultaneous Y-axis vertical machining on all three axes.
See this machine in action
• Simultaneous machining with synchronised left and right spindles
• 12/24 Station Turrets (Up to 72 tools, Number of tool positions)
• Up to 36 tool stations for milling tools.
• 5.5/3.7kW milling power on all 3 turrets
WY-150V - Twin turret machine:
The third machine in the “V series,” built for speed. Nakamura-Tome’s ChronoCut software cuts idle time without sacrificing accuracy or altering the cutting process.
• Y-Axis stroke: Y1, +/- 45mm: Y2, +/- 45mm: Y3, +/-35mm
• Simultaneous Y-Axis vertical machining DESCRIPTION
• High speed indexing
• High speed spindle synchronisation
• Execution of multiple M-codes within the same block
• High speed rigid tapping
• Y-axis on both turrets, 10,000 min -1 spindle speeds
• 7.5/3.7kW milling power on both turrets
See this machine in action
NOT SURE WHAT MACHINE CAN PRODUCE YOUR PART?
NT Flex – Twin turret machine:
Compact, 2-spindle, 2-turret precision CNC multi-tasking lathe. It is compact yet accommodates 24-postion turrets in both upper and lower areas, with the use of quadruple tool holders, you can set up to a maximum of 96 tools.
DESCRIPTION
Maximum turning diameter 150 mm
Maximum turning length 250 mm
Distance between spindles Max. 655 mm / Min. 200 mm
Bar capacity Ø32 mm (op. Ø38 mm) Ø38 mm
Chuck size 5”
See this machine in action
• All axes with box-way slides
• Y-Axis on upper turret
• 5.5/3.7kW Milling power on both turrets
• Up to 48 tools, number of tool positions
• Max bar capacity 102mm (op.)
• GR-210 Gantry Loader, for automation (op.)
SC-300II – Single turret machine:
Please, scan the QR code to search by industry / component.
• Faster cycle times, with simultaneous machining
• 8,000 min -1 Spindle speeds – Main & Sub spindle
• 8,000 min -1 milling spindle speed (op. 10,000 min -1)
• 7.1/2.8kW milling power on both turrets (8,000 min -1)
• Y-axis machining +/- 25 mm (upper turret only)
• Lower turret milling capability, for synchronised operations.
See this machine in action
WT-300 - Twin turret machine:
High rigidity multi-tasking machine equipped with upper and lower turrets and twin opposed spindles. Equipped with box-way slides for all axes offering high stability for difficult-to-cut and high hardness materials.
10” or 12”, single turret machine equipped with highly rigid box-way slides on all axes to enhance rigidity and stability. With option for sub spindle, tailstock or long bed version, the SC-300II offers a powerful single turret machine solution.
Maximum turning diameter 360 mm
Maximum turning length 635 mm (SC-300II-S) / 1,135 mm (SC-300II-L)
Distance between spindles Max. 910 mm / Min. 310 mm (SC-300II-S)
Distance between spindles Max. 1,310 mm / Min. 310 mm (SC-300II-L)
Bar capacity Ø71 mm (op. Ø89 mm)
Chuck size 10” / 12”
See this machine in action
• Box-way slides on all axes
• Equipped with milling and Y-axis as standard
• Y-axis stroke 120mm (+/-60mm)
• 7.5/3.7kW milling power. (12 station turret)
• Available options Sub-spindle or Tailstock on right side
• 22/18.5kW Spindle power left spindle
See this machine in action
AS-200 - Single turret machine:
This compact “Small on the outside, Big on the inside” single turret machine with 8-inch chuck and high cutting capabilities, can handle a wide range of applications from turning to milling.
• Y-Axis and milling function, standard
• Y-axis stroke 82mm (+/_41mm)
• 5.5/3.7kW milling power
• 15 station turret, all capable for milling
• Available options Sub-spindle or Tailstock on right side
• Eco-Friendly: Energy saving functions
ETG brings together the strengths of the world’s most advanced manufacturers of high technology machine tools, fabrication machines, automation, laser cutting, wire EDM, workholding systems and industry 4.0 advancements to deliver highly productive and effective metal cutting solutions.
Turning and mill-turn machines play a crucial role in modern manufacturing, offering high precision, efficiency, and flexibility in machining complex parts. Traditional turning machines specialise in rotational operations, while mill-turn machines combine turning and milling capabilities in a single setup.
One of the key advantages of mill-turn machines from ETG, is their multi-tasking functionality, allowing manufacturers to perform milling, drilling, and turning in a single operation. Equipped with Automatic Tool Changers (ATC), these machines can seamlessly switch between different cutting tools without manual intervention, reducing downtime and increasing productivity.
By consolidating multiple processes into one machine, mill-turn technology enhances accuracy, minimises material handling, and significantly shortens lead times. This makes it an ideal solution for manufacturing sectors requiring high-precision components, such as aerospace, automotive, and medical manufacturing.
See the full Nakamura-Tome range of machines available from ETG
ETG’s Turning & Millturn Principals and Associates include: HERE HERE
See the full Pietro Carnaghi range of machines available from ETG