6 minute read
Hand Tools Lasers & Leveling
TapeLazer HP Automatic Series Traffic Tape Applicator
The Graco TapeLazer is a fully-automatic, walk/ ride-behind, gas-powered traffic tape applicator that includes key features from the LineLazer V HP Automatic stripers for fast, easy taping applications. • Apply permanent or temporary tape up to 14 in. wide • Single pass and pre-program skips with no layout required • Precision-cut technology with non-stick design—single blade cuts on non-adhesive side of the tape • Fast tape loading with tool-less locator collars for quick/easy change-out
ForConstructionPros.com/21342718
Milwaukee Tool's 12-in. Digital Measuring Wheel
Milwaukee Tool's 12-in. Digital Measuring Wheel was designed with handle-mounted buttons and a digital display, the measuring wheel is optimized for one-handed use and is the most efficient measuring wheel on the market.
The highly intuitive digital interface allows users to save and store up to four measurements or conversions in imperial, metric, and engineer scales. Users can also pause and clear measurements with just the touch of a button. For durability, the backlit screen is IP54 rated for dust and water protection in harsh jobsite conditions. For ease of use, the wheel’s frame telescopes to multiple heights and is easy to store. The Milwaukee Digital Measuring Wheel is powered off two included AAA batteries.
ForConstructionPros.com/21627695
Xtreme Concrete Sprayer Model 19049
Chapin's Xtreme Concrete Sprayer Model 19049 is used for applying form oil, curing compounds and sealants. • Extreme-Viton seals and gaskets are resistant to the strongest chemicals • Exclusive 3.5-gal. TRI-POXY tank provides triple protection against rust, corrosion and damage from denting • 4-in. mouth opening • Unique Tri-Lock seal ensures pump cap locks tightly into place • Brass spray handle with “Lock-on” and quick release design • Brass nozzle delivers fan spray for even coverage.
ForConstructionPros.com/21086664
RimRiser BoltAdjusted Manhole Leveling Solutions
The RimRiser adjust-to-grade systems for manholes, catch basins and precast tops makes the process of leveling cast iron manhole rings, inlet frames/grates and precast concrete tops simpler, faster and more accurate. • More than 35 RimRiser-ready castings available including models specified for 15 states • Eliminates hazards from lifting with prybars, overhead machines or slings and prevents accidental drops on hands or fingers • Bolts are small enough to fit in a pocket, making them easy to store and carry • Castings all utilize the same bolt-adjustable system so there’s no need to order special sizes in advance
ForConstructionPros.com/21603084
Kipper Crete's KPR 11.5 Collapsible Pan Attachment
Kipper Crete, LLC's attachment The Kipper KPR11.5-CP (Collapsible Pan) features six blades. • Size: 11.5-in. troweling diameter • Weight: Under 22 lbs. • Blades: Six The size of the Kipper Crete LLC allows contractors to easily get in smaller areas, work around obstacles, and get close to edges.Kipper Crete LLC All of Kipper Crete's trowels can be attached to a variety of variable speed controlled drills or polishers, turning them into either walk-behind or handheld power trowels.
ForConstructionPros.com/21244759
The Traker from Aaron Hilbert LLC
The Traker is a manual tool for installing contraction joints in concrete slabs-on-ground. Compared to sawcuts, Trak Joints are four times faster, 75% less costly, and dust free.
The joints are installed early—immediately before or after bull-floating, while the concrete is highly workable. The early entry joints cause cracks to appear typically the day after placement.
The Traker uses a roll of plastic tape resting against an insertion disc. The insertion disc folds and embeds the tape into fresh concrete. The top edge of the tape is pushed slightly below the concrete surface. The tape remains in the slab to create a weakened plane.
ForConstructionPros.com/21035955
The ProLaser 842 Bambino Cross Laser Level Series by Kapro
Kapro Tools' 842 Prolaser Bambino Cross Laser Level series (available in red (842S) and green (842GS) versions) is based on Kapro’s heavy-duty 872 Prolaser PLUS Cross Laser Levels and incorporates many of its features, including intersecting horizontal and vertical beams at 90 degrees, a manual mode for angular layout/marking with a visual “out of level” warning, a mechanical pendulum lock mechanism incorporated in the on-off switch and a 1/4-in. tripod thread.
Kapro’s 842S and 842GS feature an indoor laser range up to 50 ft., an accuracy of 0.0004 in. / 1 in. and an exceptional self-leveling range of ±3 degrees. The 842 series comes with the flexible omni-set tripod for mounting and attaching the 842S and 842GS to virtually any surface. Lasers in the 842 series have a protective rubber over-molded casing and come with a three-year warranty.
ForConstructionPros.com/21722913
Sponsored by
ACI's 2021 Collection of Concrete Codes, Specs & Practices
The ACI Collection provides a comprehensive source of information on concrete design, construction, materials, and repair, with nearly 50 codes and specifications and more than 200 practices—including all guides and reports. The ACI Collection features ACI 318 “Building Code Requirements for Structural Concrete,” ACI 301 “Specifications for Structural Concrete,” and ACI 562 “Code Requirements for Assessment, Repair, and Rehabilitation of Existing Concrete Structures and Commentary.” Additional categories in the ACI Collection include concrete materials, properties, design, construction, reinforcement, specialized application, repair, structural analysis, and innovation, plus popular topics such as slabs, formwork, and masonry.
The ACI Collection is available as an online subscription, a USB drive, and a nine-volume set of books. Specifically developed for individual users, the online subscription to the ACI Collection is the most convenient format, is always up-to-date, and includes access to every new ACI document as soon as it is published. Additionally, the online subscription includes access to current and historical versions of ACI’s codes and specifications, along with versions in both inch-pound and S.I. units.
Special online access for multiple users, entire offices, and large multinational companies, is also available.
ForConstructionPros.com/21722864
Introducing for 2021, The TPC Guidance Controlled Slipform Concrete Paver
The TPC is operated via a Radio Controlled Belly Pack instrument box. In auto mode, the machine will follow the guidance string and adjust tracking and screed elevation automatically. The screed comes in different widths from 48” to 96”. The TPC eliminates the need for forms. Just grade and set the string line!
Standard Features
•The conveyor can be moved to feed the machine from either side. • The hopper has an auger inside to be sure the material fills both sides of the hopper. •The hopper has two hydraulic cylinders which raise the hopper and screed for transport and easy loading on the trailer. •The 74 HP Hatz German engine is EPA compliant in all 50 states and delivers plenty of power. •This engine, coupled with a proclaim pump, will give the hydraulic power needed year after year. •This is a machine designed with only the basics needed to slipform the walk or pad with no forms required. By designing the TPC this way, we were able to cut the cost and make it affordable for everyone, not just the big guys.
105 School House Road, Cheshire, CT 06410, 800-872-5726, 203-271-1682
