8 minute read
Grading, Compaction Site Preparation Equipment
Kubota’s CC30 Concrete Claw
Kubota's CC30 Concrete Claw is used for digging and removing large sections of concrete floors, driveways, sidewalks and other large slabs. • Universal quick-attach hitch fits a variety of loaders • High strength T1 steel side panels resist bending forces • Reinforced side panels • Performance matched with Kubota SSV and SVL Series
ForConstructionPros.com/21113973
Antraquip’s Rock & Concrete Cutters
These rock and concrete grinders are suitable for trenching, controlled demolition, scaling, soil remediation, tunneling, underwater cutting and general rock excavation. • Numerous models available for excavators ranging from 2 to 110 tons • Choice of cutter heads styles to suit the application • AQ line equipped with a high-torque, lowspeed hydraulic motor with rugged gearing and symmetrically aligned cutter bit patterns for maximum productivity
ForConstructionPros.com/10076986
Updates to MBW’s AP/GP18 Single Direction Vibratory Plates
MBW's series of vibratory plates, the GP12, GP15 and GP18 are available with or without a water tank. A patented suspension system reduces hand arm vibration and also better isolates all upper mass components, including the engine, from vibrations produced by the machine’s exciter. These plates are perfect for confined areas of granular soils including sands and gravels as well as placing interlocking pavers, bricks and blocks with the optional UHMW paving pad.
The 18 had some recent modifications to the spray bar and added clearance which now allows for a paving pad to be used on the asphalt version. Additional updates also include standard Honda GX160 engine and new side plate handles makes lifting easier.
Weighing 130 lbs. (59 kg) to 184 lbs. (83 kg), these plates are easy to lift and maneuver around the jobsite.
Accompanied by intense vibration, MBW’s 1000 Series vibratory plates are ideally suited for a number of your compaction application needs.
ForConstructionPros.com/21354560
Mecalac Updated Its MCR Series Excavators
The updated 6MCR, 8MCR and 10MCR crawler skid excavators provide the swiftness of a skid steer with the rotation of an excavator for versatility and enhanced travel speeds. • Combine a three-part arm and rotating ability to deliver 360° capability • Arm can be tucked in even with a full bucket for a true zero turn radius • Feature a hydrostatic transmission and drive motors with a dedicated pump to drive the motor • Capable of travel speeds up to 6.2 mph • CONNECT quick-coupler system allows operators to quickly transition between attachments without leaving the cab
ForConstructionPros.com/21136452
Brokk’s BCP Planer Attachment
The BCP Planer Attachment comes in three models for Brokk remote-controlled demolition machines and is designed for controlled material removal on walls, floors and ceilings for cleaning, renovation and restoration applications. • 10- and 13-in. drum sizes with maximum cutting depths of 1/4 in. per pass (1/2 in. combined) and automatic leveling in all directions • 360° rotation allows use at any angle including overhead • Selection of cutting drums for different operations with drum replacement taking less than 5 minutes • Fully remote controlled from the Brokk control box
ATTACHMENTS MAKE IT 10X
MORE PRODUCTIVE
IF IT INVOLVES CONCRETE, WE HAVE YOU COVERED
Learn more about the new Cat® Compact Machines by visiting – www.NECatDealer.com/attach 0% for 24 MONTH FINANCING, or BUNDLE with your Machine Financing
For every task that comes up on a masonry or asphalt job, there’s a Cat attachment engineered to
handle it. Your projects are becoming larger and more complex, and yet your window for completion is only being shortened. Your Northeastern Region Cat ® Dealers provide the solutions you need to build a successful asphalt business. » A full line of industry-leading masonry equipment and work tools to handle any job » Over 35 types of Work Tool attachments — we have the largest selection in the industry » 74 locations throughout the Northeast provide immediate parts, service, and support » The highest quality, most durable attachments available at your local dealership
For more information, visit necatdealer.com/worktool/attach
ASK ABOUT OUR MEMBERSHIP DISCOUNTS
Since 1923
SINCE 1948
Cleveland Brothers
www.clevelandbrothers.com
Serving Pennsylvania and northern West Virginia 844-720-4CAT
SINCE 1957
Foley, Incorporated
www.foleyinc.com
Serving New Jersey, eastern Pennsylvania, northern Delaware and Staten Island 732-885-5555
SINCE 1923
H.O. Penn Machinery
www.hopenn.com
Serving Connecticut and southern New York 844-CAT-1923
SINCE 1960
Milton CAT
www.miltoncat.com
Serving Massachusetts, Maine, New Hampshire, Vermont, Rhode Island, and Upstate New York 888-347-3449
Marshalltown’s Vibratory Plate Compactor
This vibratory plate compactor produces over 3,800 lbs. of centrifugal force with a frequency of 5,000 vpm. • Travels at a speed up to 110 fpm • Single-piece plate and exciter • 23.7 in x 18.9 in plate size • Honda GX160 engine and available 2-gal. water tank • Throttle lever located on the handle • Comes with a folding handle that locks in place and two lower handles for multiple lifting points
ForConstructionPros.com/21366843
Paving the way for the future of demolition, ALLU's Screener and Crusher Buckets for 10 to 38 Ton machines are designed to be adjustable for 13 different discharge sizes. Place two solutions side by side provides demolition sites with increased capacity, saving the customer five times over, which saves time and money giving you a solution for your business. The advantage of using both solutions side by side is increased capacity and resumed wear and tear for sites with five times the production rate. First launched in Finland and tried and tested with Nordic countries which are known for harsh environments, when a customer in Finland tested the crusher and screener side by side, it became a game-changer for demolition. A sieve and crusher bucket chain for handling powdered concrete. At this site, 85% percent was screened and also partially crushed through a screener crusher bucket (Allu Transformer DH 3-17 XHD) and only the excess very hard material was crushed with a crusher bucket (Allu Crusher AC 25-37). The company expects this percentage to be higher in less harsh environments.
The demolition phase of the demolition yard site took a total of three weeks. At the time of the visit, approximately 600-700 tons of concrete waste were still untreated. In the next or fourth week, there was still a run-off of crushed concrete for use at the bottom of the forest road. The purpose of the entire process is to recycle concrete waste at ALLU into stone aggregate for reuse, which replaces the need to use virgin aggregate providing environmentally sustainable solutions.
ForConstructionPros.com/21295182
edcostore.com • sales@edcostore.com • edcoinc.com
STRIP • GRIND • REMOVE
CORE 4 TOOLING
Magna-Blade Dyma-Dot Dyma-Seg Dyma-PCD
NEW Multi-Tooling Discs with Carbide Pockets!
STRIPPING JUST GOT EASIER! SEC-NG
Single Disc Floor Grinder
The MQ Mikasa MVH508GH reversible plate produces 13,489 lbs. of centrifugal force and has a working width of 26 in. using standard extension plates. It is powered by an easy starting Honda GX390 gasoline engine fitted with cyclonic air filtration to withstand harsh work environments. A proven hydraulic drive system ensures smooth directional control and consistent, reliable performance. The wrap-around shroud protects the engine both in the trench and during transport. A swing-open design provides access to key service points for simplified maintenance. The unit can be fitted with the COMPAS system to manage compaction progress.
ForConstructionPros.com/21378223
Mecalac Updated Its 6MCR Skid Excavator & 7MWR Wheeled Excavator
Mecalac designed a new configuration of its innovative two-piece boom with offset for 6MCR skid excavator and 7MWR wheeled excavator models. The boom option allows customers to better tailor equipment for their specific needs. • An extended boom range, which is now standard configuration for the 6MCR and 7MWR excavators • Boom can be tucked close to the machine with a full bucket • Boom is offset to the side of the cab • An additional offset in the second segment of the boom • Five axles for range of motion, a compact footprint and minimal repositioning • Places the stick cylinder above the boom, rather than underneath, to provide a wider working angle, faster movement and higher penetration force • Attachments, including the loader bucket and pallet fork are still compatible
ForConstructionPros.com/21244858
