2 minute read
Quality Control
Troxler PaveTracker Plus
The Troxler PaveTracker Plus is a lightweight electromagnetic sensing device for measuring the uniformity and relative density of asphalt pavement. • Measurements are practically instantaneous when the device is placed on the asphalt surface, allowing the operator to correct problems before construction is complete • User-friendly software to assist the operator in performing readings and storing data for later viewing or downloading
ForConstructionPros. com/10085358
ATS Asphalt Testing Solutions
Asphalt Testing Solutions & Engineering partners with contractors to assist in multiple areas before, during and after production and placement of asphalt mixtures. Quality Control & Quality Assurance • At the Plant and On the Road Coring & Testing • Volumetrics • Performance Testing Engineering Analysis & Consulting • Forensic Analysis & More
ForConstructionPros. com/21062066
PAVELAB50 Automatic ClosedSystem Asphalt Analyzer
Controls Group
The PAVELAB50 Automatic ClosedSystem Asphalt Analyzer is designed to separate bitumen, filler and aggregates from asphalt mixtures by closed-system solvent extraction.
ForConstructionPros. com/21069785
QUALITY CONTROL
Sponsored By
TransTech PQI 380 Density Gauge
TransTech Systems flagship product, the PQI 380 non-nuclear asphalt density gauge. Precise pavement density measurement almost instantly (3 seconds) without the hassle of nuclear regulatory training and certification. • Full color VGA display • LED backlight for easy visibility in light or dark situations • Customizable project and mix entries • No badges, licenses or storage and transport concerns
ForConstructionPros.com/10146917
Humboldt Hamburg Wheel-Tracking Tester
The HA-1000 Hamburg wheel-tracking tester is used to test submerged, compacted hot mix or warm mix asphalt specimens as per AASHTO T 324 standard. • Device consists of a reciprocating wheel that is rolled over the specimens while measuring the rate of permanent deformation • Accommodates cylindrical or slab specimens. • Superpave Gyratory Compactor available for specimen compaction
ForConstructionPros. com/12238934
FastMeasure OBD-II Onboard Diagnostics Tool
Just plug the OBD-II connector into the onboard diagnostics port (OBDII) usually just below the dashboard. Calibrate, and you’re ready to measure. • FastMeasure OBD-II is small in size, sits on the dashboard and measures at highway speeds. • The unit is easy to calibrate in either feet, yards, miles or meters • For use on most vehicles 2006 or newer
ForConstructionPros. com/20866390
The InstroTek NoNuke offers system error warnings and advanced measurement technology which can result in a more accurate and precise density and percent compaction measurements. • Systems include Moisture Presence Warning, Auto Surface-Roughness Correction and Gauge System Checks, which notify the user of potential gauge issues and help eliminate outside factors that can affect the gauge reading
ForConstructionPros.com/21138201
GSSI PaveScan 2.0 Asphalt Density Assessment Tool
PaveScan 2.0 incorporates a new sensor design built specifically for the extremes of the asphalt paving environment, foldable deployment arms with high-visibility for work site safety and has a warm-up time of under one minute when ambient temperature is over 70° F. • Ideal for uncovering problems that occur during the paving process, including poor uniformity and significant variations in density
