Enjoy the benefits of HVLPwith a SUPER System!

HVLPis the spray system that everyone is switching to. Instead of highly compressed air, it uses a high volume of low pressure air to atomize paint. The air is supplied by a high-output turbine that is maintenance-free. No compressor is needed and the quality of finish is identical to the best high pressure spray finishes. Because the air pressure is low, the FUJI HVLPgun produces a softer, easier to control spray. This lets you lay the paint on gently and not blast it on. Overspray is reduced by up to 80% for a cleaner, healthier workplace. Savings in paint can be as much as 50%

The FUJI SC-1 turbine spraygun features a self centering nozzle for a perfect spray patter everytime. Our aluminum nozzles are hard-

The ‘SUPER’model turbine is powered by a high performance, 3 stage, double ball-bearing, single speed, bypass motor that produces over 100cfm at 5 psi. This motor, made by Ametek-Lamb (Ohio) is the most powerful in its class. Three-stage means that 3 fans are used to develop air propulsion. The result is better atomization of paints-- especially high solids such as water-based coatings.

Here’s what American Woodworker Magazine had to say about our SUPER model...

“The system includes an excellent three-stage turbine and features like a hose end airvalve...the gun atomizes beautifully and has a full range of features.

“Quality of atomization rated 9.8 out of 10.”

The complete system is CSAapproved. All electrical components are ULlisted. The FUJI warranty covers parts and labor for a period of 2 years after purchase.

Some facts about FUJI Spray that you may not know...

•We are a 100% North American Company.

• Our only product is HVLP(since 1986).

• North American manufacturing content is over 96% anodized to prevent wear. Needles and jets are stainless steel, The fluid adjusting screw and spraycap are made from Delrin, a lighweight, virtually indestructible nylon that is superior to aluminum. The gun and parts are machined on CNC lathes to aircraft tolerances.

NEEDLE No.SIZEMETRICMATERIAL

No.2.028.7mmInks, stains, shading. Mo.3 (Standard).0401 mmLacquers, enamels, water-based coatings.

No.4.0551.4mmAs above with more coverage.

No.5.0792 mmSplatter paints, latex.

No.6.1102.8As above with more coverage.

With the FUJI SC-1 turbine spraygun it’s easy to make spray pattern changes. Simply turn the floating nozzle and it clicks into position. By controlling the amount of paint and air, you can even use the FUJI gun like an airbrush for subtle shading or touch-up. Infact, one accessory is a 40z plastic top cup--ideal for spraying smaller volumes of paint. You vsn adjust the pattern size from 1/8” to 15” for all types of fine finishing.

•We sell directly to the retailer eliminating middlemen and saving you dollars.

Specifications

ModelSuper

Cup CapacitySC-1

Cup TypeQuick Release Bayonet Mount Hose25ft by 3/4”

Motor Type3-stage, bypass Motor Model116765

Motor MakerAmetek-Lamb (Ohio)

Voltage120V 15A(Household current)

Operating Amperage11.5A(CSArating)

SwitchBuilt-in Circuit Breaker

Air FilterDouble

Case DimensionsH-8 1/4”

D- 11”

W- 10 1/2

System Weight261bs