BAUER COUPLINGS (BLACK STEEL)

The easy handling HK-lever closure couplings, made of deep drawing steel, consists of only three parts;––ball.lever closure ring and socket (the latter comes with a rubber sealing ring that cannot get lost).

When the HK-coupling is locked, the rubber sealing ring is pressed onto the coupling parts, providing thus for absolute suction and pressure. tightness no matter what the pipe’s inside pressure might be.

On special request we can supply oil-and heat-proof rubber sealing rings.

Even in the dark and when soiled the HK-lever closure coupling is opened or locked with one simple grip. The ball shaped coupling parts permit a cone deviation up to 30 degrees while remaining absolute tight. Pipings with HK-quick closure couplings can therefore easily adjust to any uneven ground; bending will cause no disturbance and the conveyed media can pass evenly and unhindered, without whirls or loss.

Delivery of coupling parts: hot galvanized or raw black.

Measurement and weight and technical details can be seen from the chart.

NOTE: Galvanized couplings available on request.

Safetyblow Gun

Basic safety blow gun for general purpose use. Tip pressure will not exceed 30 PSI, yet gives a good basic blast of air cleaning.

Safety glasses or shield must be worn when using any blow gun

BLOW GUN EXTENSIONS and TIPS

1/4” female NPT inlet

Blow Gun Extensions

5/16” tip facilitates use in tight places. Blow gun tip thread is 1/8” NPT.

Rubber Tipped Blow Gun

Provides leakproof seal between gun and fluid line or other opening. Also excellent for cleaning molds or delicate surfaces where a metal tip might scratch or otherwise harm critical areas.

SST10 fits Safety Blow Gun

D201RT fits Rubber Tipped Blown Gun

Blow Gun Tips

CAUTION: This blow gun does not have a safety by-pass to prevent buildup of tip pressure in the event of tip blockage. It may be used for cleaning purposes only if the air supply (inlet pressure) has been to 30 PSI or less.

Pistolgripblow Guns

•Contoured pistol-grip for safe, comfortable handling, even with greasy hands.

• Convenient “hang-up” hook

• Complies with the U.S. Dept.. of Labor, OSHAStandard 1910.242(B), permitting maximum occupational noise level exposure

•Comforms to Title 41, Walsh-Healy Rules and Regulations P50-204.8, Safety and Health Standards

Part # List Price

PG70067.00