The marble polishing by bonastre are completely revolutionary

Hacks to the picturesque marble polishing and cleaning

The floors made of marble usually get hand picked by people wishing to install them in their homes, offices, commercial buildings, etc. Thus, the matching set is always made to order and placed with care. To get it shining at least for the 1st year, people spend on heavy duty cleaning machines and chemicals. To get the desired marble polishing done, people go through a lot of hard work and then finally give up when they realise that the marble floors will only break their break, figurately.

The above statement gets coming true, literally also, when people tend to use such products to clean the floors that make them slippery. The shine might be achieved but the slippery feature makes them a risquĂŠ.

How to make sure that the floors don’t get slippery after polishing?

The floors get exposed to a lot of footsteps, dirt, mud, food spillage, chewing gum, water, etc. As a result, harsh chemicals have to be used to clean it off. This makes the floors duller than before. One would think of leaving it dirty only.

Here are some pointers to have an anti-slippery and shiny floor: • Use the bonastre products brought in all the way from Barcelona, Spain for Indian floors. They are designed in the most intelligent way.

• The European technology of having diamond dust impregnated in the pads/ disks to cut through the floor to remove enough the toughest stains, is quite remarkable.

• The diamond crushes the stone and then in the next step, the bonastre pads gather it up, step by step, this goes on. By the end of the entire process, the floor will be shinning like new.

• These bonastre disks use only water to do their job well.

• The floor is deceptively Non-slippery.

The floors are after all stones, which get discoloured and stained after a while. They do not require harsh

chemicals to be shinned. A regular mopping session will surely keep them cleaned and maintained. After one invests and uses the bonastre products for floor polishing, a regular maintenance will seem like a piece of cake.

The bonastre products come in many variants like the Bonastre Pro, which has small diamonds attached to it in 3 steps.

1. Red Disc: Remove Scratches: Apply water onto the work area, make 4 passes over the surface, then vacuum up solution.

2. Brown Disc: Deep clean Surface: Apply water onto the work area and make 4 passes over the surface, then vacuum up solution.

3. Yellow Disc: The floor will begin to shine: Apply water onto the work area and make 3 passes over the surface, then vacuum up solution. Repeat once more with fresh water.

4. Green Bonastre Pad: Use this to finish Grand: Apply water onto the work area and make 3 passes over the surface, then vacuum the solution. Repeat 1 or 2 more times with fresh water.

To get the picturesque marble polishing, use the appropriate products and solutions to sustain the shine.

Make your investment last longer and get the maximum use of it as possible.

To know more about the bonastre products for floor polishing needs; Visit: http://floorcareco.in/or Call: 0120-4256161.