SMART PRODUCT GUIDE VERSION 10
SMART Catalog cover.indd 3
1/28/2019 9:58:26 AM
finishmaster.com
SANDING DISCS • SHEETS • ROLLS • FINISHING SYSTEM
TABLE OF CONTENTS CHEMICALS/EQUIPMENT
ABRASIVES................................................................................................. 4 CARTRIDGES............................................................................................. 6 TAPE............................................................................................................ 8 MASKING PRODUCTS............................................................................ 9 BODY FILLER........................................................................................... 10 WIPES........................................................................................................ 12 SMART BY PURIS AND CLEANERS.................................................... 13 BUFFING PADS....................................................................................... 14 AEROSOLS................................................................................................ 16 CLEARS AND PRIMERS......................................................................... 18 DETAILING............................................................................................... 19 SUPPLIES ................................................................................................. 20 SAFETY AND BED LINER..................................................................... 21 CHEMICALS AND EQUIPMENT.......................................................... 22 *SOME PRODUCTS USE INDUSTRY RECOGNIZED GENERAL SIZES THAT MAY VARY FROM ACTUAL SIZE.
SMART PRODUCT CATALOG CHEMICAL/EQUIPMENT SMART_catalog_version 10_V2.indd 3
3 1/14/2019 9:57:23 AM
ABRASIVES
ABRASIVES ABRASIVES
finishmaster.com
SANDING DISCS • SHEETS • ROLLS • FINISHING SYSTEM SANDING DISCS • ROLLS SHEETS• •FINISHING ROLLS • FINISHING SANDING DISCS • SHEETS SYSTEM SYSTEM
SANDING AND ROLLS SANDING DISCS, DISCS, SHEETS,SHEETS, AND ROLLS
FL FLEX SHE
lastingaluminum premium oxide aluminum oxide Sanding Long lastingLong premium Sanding Discs are manufactured minimize and be Discs are manufactured to minimize to buildup and buildup be tear resistant. a hook and loop tear resistant. Available withAvailable either awith hookeither and loop or adhesive backing. or adhesive backing.
Flex Sheets Flex are alum aluminum oxid Perf Perfect for prime prep, these prep eve curvle curves without
from quality the same quality asmaterials Made from Made the same materials our as our Sanding Discs, and File Sheets Rolls are excellent Sanding Discs, File Sheets Rolls areandexcellent solutions forsolutions blocking for andblocking sandingand flat sanding surfaces.flat surfaces.
5¼” x 6¾”
GRI
SMART-GRIP SMART-GRIP BACKINGBACKING x 16 ” SHEET 6” DISC 6” DISC 3” DISC 3” DISC 2 ” x 16 2 ” ”SHEET
SMART-STICK SMART-STICK BACKINGBACKING x 25 YD ROLL 6” DISC 6” DISC 2 ” x 252YD”ROLL
GRIT
GRIT
40
40
80
80
SMT80G SMT80G
SMT80-G3 SMT80-G3
SMT80FG SMT80FG
SMT80S SMT80S
SMT80RS SMT80RS
120
120
SMT120G SMT120G
SMT120-G3SMT120-G3
SMT120FG SMT120FG
SMT120S SMT120S
SMT120RS SMT120RS
150
150
SMT150G SMT150G
SMT150-G3SMT150-G3
SMT150FG SMT150FG
SMT150S SMT150S
SMT150RS SMT150RS
180
180
SMT180G SMT180G
SMT180-G3SMT180-G3
SMT180FG SMT180FG
SMT180S SMT180S
SMT180RS SMT180RS
220
220
SMT220G SMT220G
SMT220-G3SMT220-G3
SMT220FG SMT220FG
SMT220S SMT220S
SMT220RS SMT220RS
240
240
SMT240G SMT240G
SMT240-G3SMT240-G3
320
320
SMT320G SMT320G
SMT320-G3SMT320-G3
SMT320FG SMT320FG
SMT320S SMT320S
SMT320RS SMT320RS
400
400
SMT400G SMT400G
SMT400-G3SMT400-G3
SMT400FG SMT400FG
SMT400S SMT400S
SMT400RS SMT400RS
500
500
SMT500G SMT500G
SMT500-G3SMT500-G3
SMT500S SMT500S
600
600
SMT600G SMT600G
SMT600-G3SMT600-G3
SMT600S SMT600S
800
800
SMT800G SMT800G
SMT800-G3SMT800-G3
SMT800S SMT800S
1000
1000
SMT1000G SMT1000G
SMT1000-G3 SMT1000-G3
SMT1000S SMT1000S
1200
1200
SMT1200G SMT1200G
SMT1200-G3 SMT1200-G3
SMT1200S SMT1200S
50/BOX
50/BOX
50/BOX
50/BOX
50/BOX
50/BOX
100/BOX 100/BOX
SMT40FG SMT40FG
1 ROLL
1 ROLL
SMT40RS SMT40RS
P
QUICKQU CH
Quic Quick Change G idead ideal for heavy grin grinding. Made cera ceramic aluminu
ALLD ALL DISCS 3”
SMT240S SMT240S
24 G
SMT
UN UNIVERSAL
FL FLEXIBLE
A th A thinner, flexib perfect for allperf co corn corners, contou for s for surface prep
SCUFF SC PA
FINISHING FINISHING SYSTEMSYSTEM
An advancedAn re prov provide a quick Maroon ScuffMar Pa Pads have a Pad fine
be usedourtogether, ourFoam Film Discs and Foam are the perfect Designed toDesigned be used totogether, Film and are theDiscs perfect all offinishing your paint finishing needs. We recommend combinationcombination for all of yourforpaint needs. We recommend using these using these products before any compounding products before any compounding or polishing.or polishing.
M 6” FILM DISCS 6” FILM DISCS FOAM DISCS 6” FOAM6” DISCS
4
00 00
SMART_catalog_version 10_V2.indd 4
GRIT
GRIT
PART# PART#
BACKINGBACKING
BOX CONTENTS BOX CONTENTS
1500
1500
SMT1500F SMT1500F
SMART-GRIP SMART-GRIP
50 DISCS 50 DISCS
FLEXIB
3000
3000
SMT3000F SMT3000F
SMART-GRIP SMART-GRIP
10 DISCS 10 DISCS
FLEX
ABRASIVES ABRASIVES ABRASIVES 1/14/2019 9:57:40 AM
finishmaster.com
FLEX SHEETS • QUICK CHANGE DISCS • CUT-OFF WHEELS • SCUFF PADS FLEX• QUICK SHEETSCHANGE • QUICKGRINDING CHANGE GRINDING DISCS •WHEELS CUT-OFF•WHEELS • SCUFF PADS FLEX SHEETS DISCS • CUT-OFF SCUFF PADS
ABRASIVES
ABRASIVES ABRASIVES
FLEX SHEETS FLEX SHEETS
Sheetswith are amade with a premium Flex Sheets Flex are made premium aluminum with film. a flexible film. aluminum oxide with oxide a flexible Perfectnew for primer, newblend panel, and blend Perfect for primer, panel, and sandand contours and prep, these prep, evenlythese sandevenly contours curves without deep scratches. curves without leaving deepleaving scratches. 5¼” x 6¾” QTY: SHEETS 5¼” x 6¾” SHEETS 25
YELLOW YELLOW
ORANGE ORANGE
400-600 400-600
800-1000 800-1000
1200-15001200-1500
SMT651 SMT651
SMT652 SMT652
SMT653 SMT653
BLUE
QTY: 25
GRIT RANGE GRIT RANGE PART# PART# YD ROLL
OLL
40RS
80RS
120RS
BLUE
PART#: SMT654 SIZE: 3” xPER 4¾”BOX: 4PER BOX: 4 PADS SIZE: 3” x 4¾” PADS FLEXPADS SHEET PADSPART#: SMT654 FLEX SHEET
CHANGE GRINDING QUICKQUICK CHANGE GRINDING DISCS DISCS
CUT-OFF WHEELS CUT-OFF WHEELS
ALLDIAMETER DISCS 3” DIAMETER ALL DISCS 3”
ALL INSTRUCTIONS AND WARNINGS FOR FOLLOW ALLFOLLOW INSTRUCTIONS AND WARNINGS FOR BESTAND RESULTS AND MAXIMUM PERFORMANCE. BEST RESULTS MAXIMUM PERFORMANCE.
Quick Change Grinding Quick Change Grinding Discs are Discs are idealduty for sanding heavy duty ideal for heavy andsanding and grinding. with a premium grinding. Made with aMade premium ceramiczirconia. aluminum zirconia. ceramic aluminum
with long-lasting ceramiccapable materialof capable of Made with Made long-lasting ceramic material and cleanly cutting metal. Available quickly and quickly cleanly cutting metal. Available in three sizes.in three sizes.
150RS
180RS
220RS
320RS
400RS
TENTS
SCS
SCS
24 GRIT 24 GRIT
36 GRIT 36 GRIT
50 GRIT 50 GRIT
SMT710 SMT710
SMT711 SMT711
SMT712 SMT712
PART#: SMT713 PART#: SMT713 UNIVERSAL QUICK CHANGE DISC HOLDER UNIVERSAL QUICK CHANGE DISC HOLDER
x 0” x 0”3” x 0” 3” x 0” x 0”4” x 0” 4” x 0” x 0” 3” x 0” 3” x 0” x 0” x 0” SMT700 SMT700
SMT701 SMT701
SMT702 SMT702
35,000 27,000 35,000 MAX35,000 RPM MAX RPM35,000 MAX RPM MAX RPM27,000 MAX RPM MAX RPM QTY: 5
QTY: 5
QTY: 5
QTY: 5
QTY: 1
QTY: 1
FLEXIBLE FLEXIBLE SCUFF SCUFF PADS PADS
A thinner, flexible alternative. SMART Scuff Pads are A thinner, flexible alternative. SMART Flexible ScuffFlexible Pads are for all common scuffing applications. perfect for allperfect common scuffing applications. Works greatWorks on great on corners,surfaces, contoured hard to reach corners, contoured andsurfaces, hard toand reach areas. Ideal areas. Ideal for surface and fine finishing. for surface prep and fineprep finishing.
SCUFF SCUFF PADS PADS
advanced and adistribution thorough distribution An advancedAn resin and aresin thorough of grain of grain provide quick andcut consistent cut while adding strength. provide a quick anda consistent while adding strength. ScuffaPads have a fastcut aggressive and Gray Scuff Maroon ScuffMaroon Pads have fast aggressive and GraycutScuff have a finecut. consistent cut. Pads have a Pads fine consistent
GRIT
GRIT
PART# PART#
SIZE
SIZE
BOX CONTENTS BOX CONTENTS
MAROONMAROON GRAY GRAY
320-400 320-400
SMT4002 SMT4002
6” x 9”
6” x 9”
20 PADS 20 PADS
600-800 600-800
SMT4001 SMT4001
6” x 9”
6” x 9”
20 PADS 20 PADS
FLEXIBLEFLEXIBLE MAROONMAROON FLEXIBLEFLEXIBLE GRAY GRAY
VERY FINE VERY FINE
SMT4005 SMT4005
4½” x 9” 4½” x 9”
25 PADS 25 PADS
ULTRA FINEULTRA FINE
SMT4006 SMT4006
4½” x 9” 4½” x 9”
25 PADS 25 PADS
ABRASIVES ABRASIVES ABRASIVES SMART_catalog_version 10_V2.indd 5
00 005 1/14/2019 9:57:45 AM
CARTRIDGES
CARTRIDGES CARTRIDGES
finishmaster.com
PLASTIC REPAIR • ADHESIVES • FOAMS PLASTIC PLASTIC REPAIR •REPAIR ADHESIVES • FOAMS• FOAMS • ADHESIVES
PLASTIC REPAIR PLASTIC REPAIR
2K SEAM 2K
Two-component urethane adhesives for tab andforother repairs. to plastic, and steel, aluminum. Plastic Plastic Two-component urethane adhesives tab and otherBonds repairs. Bonds tosteel, plastic, and aluminum. repair cartridges are epoxy-based and available a wide for range of plastics. repair cartridges are epoxy-based andfor available a wide range of plastics. Semi-RigidSemi-Rigid (SMT260)(SMT260) recommended for semi-rigid olefin-based plastics, asplastics, well as SMC. recommended for semi-rigid olefin-based as well as SMC.
2K Seam Sealers 2K Sea
Heavy Bodied se Heavy metal, canmetal, be to
Total Plastic (SMT261) recommended for ABS, PP,forPPO, RIM, PUR, TEO, TPE, and TPUR. Total Plastic (SMT261) recommended ABS,PUR, PP, PPO, RIM, TPO, TEO, TPE, TPO, and TPUR.
Self Leveling Self(SM Le
Hi-Build (SMT26 Hi-Bui
PART# PART#
WORKING TIME TIME WORKING
SET TIME SET TIME
CURE TIME CURE TIME
SMTR20 SMTR20
15 SECONDS 15 SECONDS
20 SECONDS 20 SECONDS
15 MINUTES 15 MINUTES
HEAVY HB
SMTF50 SMTF50 45 SECONDS 50 SECONDS 45 SECONDS 50 SECONDS RECOMMENDATION: SMART ADHESION PROMOTER - PART# SMT3920 RECOMMENDATION: SMART ADHESION PROMOTER - PART# SMT3920
15 MINUTES 15 MINUTES
HEAVY HB
RAPID20 ADHESIVE RAPID20 ADHESIVE FAST50FAST50 ADHESIVE ADHESIVE
SELF
PART# PART#
WORKING TIME TIME WORKING
SAND TIME SAND TIME
TOPCOAT TIME TIME TOPCOAT
SMT260 SMT260
5 MINUTES 5 MINUTES
15 MINUTES 15 MINUTES
20 MINUTES 20 MINUTES
SMT261 SMT261 7 MINUTES 7 MINUTES NO ADHESION PROMOTER NECESSARY (SEE TDS) NO ADHESION PROMOTER NECESSARY (SEE TDS)
15 MINUTES 15 MINUTES
20 MINUTES 20 MINUTES
SEMI-RIGID PLASTICPLASTIC SEMI-RIGID TOTAL PLASTIC TOTAL PLASTIC
HI
1K SEAM 1K
Perfect forPerfec filling applied directly applie solvent-borne pa solven Versatile and eas Versat variety of variety beads paintable with paintam
ADHESIVES ADHESIVES
Two-component epoxy designed bond totosteel, SMC, and fiberglass. Two-component epoxytodesigned bondaluminum, to steel, aluminum, SMC, and fiberglass. Panel BondPanel (SMT263) contains glass beads to maintain consistent bond thickness. Bond (SMT263) contains glass beads to maintain consistent bond thickness. Small PanelSmall (SMT264) is a non-sag product bond quickly. Panel (SMT264) is aSMC non-sag SMCdesigned producttodesigned to bond quickly.
W PART# PART#
WORKING TIME TIME WORKING
SET TIME SET TIME
CURE TIME CURE TIME
PANEL BOND PANEL BOND
SMT263 SMT263
90 MINUTES 90 MINUTES
4 HOURS 4 HOURS
24 HOURS24 HOURS
SMALL PANEL SMALL PANEL
SMT264 SMT264
30 MINUTES 30 MINUTES
2 HOURS 2 HOURS
24 HOURS24 HOURS
B
SPRAY
SPRAY
FOAMSFOAMS
Flexible Foam (SMT269) is a two-component urethane-based foam with foam a 6:1 with expansion ratio. ratio. Flexible Foam (SMT269) is a two-component urethane-based a 6:1 expansion Rigid FoamRigid (SMT270) is a two-component urethane-based foam with foam a 10:1with expansion ratio. ratio. Foam (SMT270) is a two-component urethane-based a 10:1 expansion
ACCESSO ACC
Both are perfect forperfect filling voids, preventing panel vibration, and soundand dampening. Both are for filling voids, preventing panel vibration, sound dampening.
FLEXIBLE FOAM FOAM FLEXIBLE SEMI-RIGID FOAM FOAM SEMI-RIGID
6
0000
SMART_catalog_version 10_V2.indd 6
PART# PART#
WORKING TIME TIME WORKING
SET TIME SET TIME
CURE TIME CURE TIME
SMT269 SMT269
15 SECONDS 15 SECONDS
2 MINUTES 2 MINUTES
15 MINUTES 15 MINUTES
SMT270 SMT270
45 SECONDS 45 SECONDS
5 MINUTES 5 MINUTES
15 MINUTES 15 MINUTES
CARTRIDGES CARTRIDGES CARTRIDGES 1/14/2019 9:57:51 AM
finishmaster.com
2K SEAM SEALER • 1K SEAM SEALER • ACCESSORIES 2K SEAM2K SEALERS • 1K SEAM SEALERS • ACCESSORIES SEAM SEALERS • 1K SEAM SEALERS • ACCESSORIES
CARTRIDGES
CARTRIDGES CARTRIDGES
2K SEAM SEALERS 2K SEAM SEALERS
2K Seam Sealers areSealers two-component epoxies that can bethat applied bare metal. 2K Seam are two-component epoxies can betoapplied to bare metal. Heavy Bodied seam sealers (SMT265, SMT266) SMT266) are non-sag, be applied bare to bare Heavy Bodied seam sealers (SMT265, arecan non-sag, can betoapplied metal, canmetal, be tooled and hold marks instantly. can immediately, be tooled immediately, and hold marks instantly. Self Leveling is ideal forisany flowed dripflowed rails and Self(SMT267) Leveling (SMT267) ideal for any driproof railschannels. and roof channels. Hi-Build (SMT268) has a thicker controlled flow applications. Hi-Build (SMT268) hasviscosity a thickerforviscosity for controlled flow applications.
PART# PART#
ME
WORKING TIME TIME SET TIME WORKING SET TIME
CURE TIME TIME TIME CURE TIME TOPCOAT TOPCOAT
ES
HEAVY HEAVY BODIEDBODIED GRAY GRAY
SMT265 SMT265
10 MINUTES 10 MINUTES
15 MINUTES 15 MINUTES
60 MINUTES 60 MINUTES
ES
HEAVY HEAVY BODIEDBODIED BLACK BLACK
SMT266 SMT266
10 MINUTES 10 MINUTES
15 MINUTES 15 MINUTES
60 MINUTES 60 MINUTES
SELF LEVELING SELF LEVELING
SMT267 SMT267
10 MINUTES 10 MINUTES
15 MINUTES 15 MINUTES
15 MINUTES 15 MINUTES
HI-BUILD HI-BUILD
SMT268 SMT268
10 MINUTES 10 MINUTES
15 MINUTES 15 MINUTES
15 MINUTES 15 MINUTES
TIME
ES
ES
ME
S
S
1K SEAM SEALERS 1K SEAM SEALERS
Perfect forPerfect filling seams, joints, andjoints, voids,and 1K Seam areSealers available four colors, cancolors, be can be for filling seams, voids,Sealers 1K Seam areinavailable in four applied directly to bare metal, and can be tooled and painted immediately with most applied directly to bare metal, and can be tooled and painted immediately with most solvent-borne paint systems. solvent-borne paint systems. Versatile and easy to apply, Seam Sealers areSealers available two colors, cancolors, replicate Versatile and easySprayable to apply, Sprayable Seam areinavailable in two canareplicate a variety of variety beads and textures, can be applied directly to bare metal, and are immediately of beads and textures, can be applied directly to bare metal, and are immediately paintable with most with solvent-borne paint systems. paintable most solvent-borne paint systems.
PART# PART#
WORKING TIME TIME WORKING
WHITE WHITE
SMT271 SMT271
5-10 MINUTES 5-10 MINUTES
GRAY GRAY BEIGE BEIGE
SMT272 SMT272
5-10 MINUTES 5-10 MINUTES
SMT273 SMT273
5-10 MINUTES 5-10 MINUTES
BLACK BLACK
SMT274 SMT274
5-10 MINUTES 5-10 MINUTES
SPRAYABLE GRAY GRAY SPRAYABLE SPRAYABLE BEIGE BEIGE SPRAYABLE
SMT278 SMT278
20 MINUTES 20 MINUTES
15 MINUTES 15 MINUTES
SMT279 SMT279
20 MINUTES 20 MINUTES
15 MINUTES 15 MINUTES
1K SPRAYABLE APPLICATOR 1K SPRAYABLE APPLICATOR
ACCESSORIES ACCESSORIES
ME
ES
CURE TIME CURE TIME
PART#: SMT283 PART#: SMT283
STATIC STATIC MIXERSMIXERS
PART#: SMT285 50PACK: 50 PART#: SMT285PER PACK: PER
STATIC STATIC MIXERSMIXERS
PART#: SMT286 6 PACK: 6 PART#: SMT286PER PACK: PER
MESH BACKING TAPE TAPE MESH BACKING
PART#: SMT291 36’ PART#: SMT291LENGTH: LENGTH: 36’
CONTOURING TAPE TAPE CONTOURING MANUALMANUAL APPLICATOR APPLICATOR
PART#: SMT292 15’ PART#: SMT292LENGTH: LENGTH: 15’ PART#: SMT281 PART#: SMT281
PNEUMATIC APPLICATOR PART#: SMT282 PNEUMATIC APPLICATOR PART#: SMT282
ES
CARTRIDGES CARTRIDGES CARTRIDGES SMART_catalog_version 10_V2.indd 7
0000 7 1/14/2019 9:57:53 AM
TAPE
finishmaster.com
MASKING • FOAM • FINELINE • TRIM MASKING TAPE • ACRYLIC FOAM TAPE • FINELINE TAPE • PERFORATED TRIM TAPE
TAPE
MASKING TAPE
MASKING
Two varieties of tape that hold up to the most rigorous body shop conditions. Waterproof, able to withstand high temperatures, and UV resistant - all while avoiding adhesive transfer.
WIDTH 6
RESISTANT TO
DIRECT UV
INDIRECT UV
TEMPERATURE
12
SMT3536
5 DAYS
15 DAYS
248° / 60 MINS
18
SMT2536
3 DAYS
5 DAYS
212° / 30 MINS
36
18MM (3/4”)
36MM (1.5”)
PREMIUM
SMT3518
PERFORMANCE
SMT2518
WATERPROOF
6” WI
PRESSURE SENSITIVE ADHESIVE
Green protec
SMART Masking Tapes are Pressure Sensitive Adhesives (PSA). When pressure is applied, PSA tapes adhere to a variety of surfaces.
Brown design
DOUBLE SIDED ACRYLIC FOAM TAPE
SOFT EDGE FOAM MASKING TAPE
Ideal for attaching plastic panels, emblems, nameplates, and other items. This reinforced acrylic foam tape adheres to a wide range of substrates including plastics and metals.
Perfect for masking off door openings, trunk jambs, or gaps to leave a soft edge and eliminate tape lines. Durable and strong during high heat bake cycles.
20 YARD ROLLS
0”
0”
0”
PART#
SIZE
SMT2512
SMT9382
SMT9383
SMT1350
½” x 54.6 YDS
FINELINE TAPE
PERFORATED TRIM MASKING TAPE
Manufactured with a highly flexible, thermally stabilized PVC backing with a rubber based pressure sensitive adhesive. FineLine Tape leaves no residue and provides a sharp, clean separation line. Heat resistant up to 302˚F.
Protects trims and moldings during painting. Perforated for easy tearing and flexible to follow contours, tight curves, and precise project areas.
PART#
THICKNE
CRASH W
Quickly and effe elements. Clear a to cover broken w
36 YARD ROLLS
8
0”
0”
0”
0”
PART#
SIZE
PART
SMT18
SMT14
SMT12
SMT34
SMT2511
2” x 11 YDS
SMT12
00
SMART_catalog_version 10_V2.indd 8
TAPE TAPE 1/14/2019 9:58:01 AM
MASKING PRODUCTS MASKING PAPER • PLASTIC SHEETING • SPRAY MASK • PROCESS GRIDS MASKING PAPER •SHEETING PLASTIC •SHEETING • SPRAY MASK •INFORMATION PROCESS INFORMATION MASKING PAPER • PLASTIC SPRAY MASK • PROCESS GRIDS GRIDS PRODUCTS MASKINGMASKING PRODUCTS
finishmaster.com
MASKING MASKING PAPERPAPER
GREEN GREEN HAND MASK 500 500 1,000 WIDTH WIDTH HAND MASK
BROWN BROWN 1,000 500
500
750
750
WHITE WHITE BLUE
BLUE
750
750
750
750
6
6
PERATURE E
12
12
° / 60 MINS
18
18
PAP1-500-18 PAP1-1000-18 PAP3-500-18 PAP3-750-18 PAP4-750-18 PAP2-750-18 PAP1-500-18 PAP1-1000-18 PAP3-500-18 PAP3-750-18 PAP4-750-18 PAP2-750-18
° / 30 MINS
36
36
PAP1-180-18 PAP1-180-18 PAP1-500-36 PAP1-1000-36 PAP3-500-36 PAP3-750-36 PAP4-750-36 PAP2-750-36 PAP3-500-36 PAP3-750-36 PAP1-500-36 PAP1-1000-36 PAP4-750-36 PAP2-750-36
S
PAP1-1000-6 PAP1-500-6PAP1-500-6 PAP1-1000-6 PAP3-500-6PAP3-500-6 PAP3-750-6PAP3-750-6 PAP4-750-6PAP4-750-6 PAP2-750-6PAP2-750-6 PAP3-750-12 PAP4-750-12 PAP2-750-12 PAP3-750-12 PAP4-750-12 PAP2-750-12
PAP1-180-12 PAP1-500-12 PAP1-1000-12 PAP1-180-12 PAP1-500-12 PAP1-1000-12
6 ROLLS/BOX 12” WIDTH 3 ROLLS/BOX 18” WIDTH 2 ROLLS/BOX 36” WIDTH 6 ROLLS/BOX 3 ROLLS/BOX 2 ROLLS/BOX 1 ROLL/BOX1 ROLL/BOX 12” WIDTH 18” WIDTH 36” WIDTH 6” WIDTH6” WIDTH
Green Masking general purpose utility-grade paper istoformulated to White Masking White Masking - This premium lint-free masking paper pliable and easy Green Masking Paper - ThisPaper general- This purpose utility-grade paper is formulated Paper - ThisPaper premium lint-free masking paper is pliable andiseasy protect against lacquers, and solvent-based paint. to cut. Resistant to paints, solvents,and urethanes, andapplications. clear coat applications. protect against lacquers, acrylics, andacrylics, solvent-based paint. to cut. Resistant to paints, solvents, urethanes, clear coat Brown Polycoated Masking - Our economymasking polycoated masking Blue Polycoated Masking premium masking polycoatedpaper masking paper Brown Polycoated Masking Paper - OurPaper economy polycoated paper is paper is Blue Polycoated Masking Paper - A Paper premium- Apolycoated designed to resist bleed-through with water-based solvent and water-based designed to resist bleed-through with water-based solvent and water-based designed to resist bleed-through with solvent and products. products. designed to resist bleed-through with solvent and products. products.
SHEETING PLASTICPLASTIC SHEETING
AQUA PLASTIC SHEETING AQUA PLASTIC SHEETING
all painting applications, our corona-treated plastic sheetingforis designed for high-density, Premium, high-density, and tear resistant masking plastic with corona Perfect for allPerfect paintingforapplications, our corona-treated plastic sheeting is designed Premium, and tear resistant masking plastic with corona maximum cling. This sheetinginisthree available to fit alllengths. automobile lengths. resist and eliminate maximum cling. This sheeting is available sizes intothree fit all sizes automobile treatment totreatment resist and to eliminate paint flaking.paint flaking.
PART# PART# THICKNESS THICKNESS
12 x 400 12 x 400 16 x 350 16 x 350 20 x 350 20 x 350
16 x 350 16 x 350
SPS1240 SPS1240
SPS2035 SPS2035
SPS1600 SPS1600
.375 MIL .375 MIL
.375 MIL .375 MIL
.3 MIL
.3 MIL
SPS1635 SPS1635 .3 MIL
CRASHCRASH WRAPWRAP
.3 MIL
SPRAY SPRAY MASK MASK
PROCESS PROCESS INFORMATION INFORMATION GRIDS GRIDS
andprotect effectively protectvehicles damaged is easy apply with any conventional gun, self-adhesive Compact, self-adhesive repair communications forms Quickly and Quickly effectively damaged fromvehicles the from Spraythe mask isSpray easy mask to apply withtoany conventional spray gun, spray Compact, repair communications forms elements. Clear protective and flexiblesheeting protective be used dries toclear non-tacky film, and protects designed vehicles to designed to easily adhere to glass automotive glassnoand leave no easily adhere to automotive and leave elements. Clear and flexible cansheeting be used can dries to non-tacky plastic clear film, plastic and protects vehicles to cover broken windows, doors, and trunks. from over-spray. upon removal. residue uponresidue removal. to cover broken windows, doors, and trunks. from over-spray.
PART# PART# SMT1250 SMT1250
SIZE
SIZE
36 x 100 36 x 100
5 GALLONS 1 GALLON1 GALLON 5 GALLONS SMT741
SMT741
SMT742
SMT742
MASKING PRODUCTS MASKING PRODUCTS MASKING PRODUCTS SMART_catalog_version 10_V2.indd 9
1 ROLL (105+ GRIDS) 1 ROLL (105+ GRIDS) SMT1255 SMT1255
00 009 1/14/2019 9:58:02 AM
BODY FILLER BODY FILLER
finishmaster.com
BODY FILLER • GLAZE • PUTTY BODY FILLERS • SMARTGLASS • GLAZE • PUTTY
ULTRA-PREMIUM BODY FILLER
ULTRA-PREMIUM GLAZE
SMARTGL
The next generation of body fillers specifically formulated to produce better results with less work. Smooth, creamy texture for excellent adhesion to a variety of substrates and superior sanding.
An incredibly versatile glaze that can be used with any body filler or alone for shallow areas. Excellent vertical hold and flexibility.
Fiberglass reinfo with short strand and fiberglass pa
1 GALLON
PER CASE
30 OUNCES
PER CASE
SBF5100
4
SBF530
6
PREMIUM BODY FILLER
PREMIUM GLAZE
A superior choice for outstanding adhesion and easy sanding. This self-leveling body filler saves sanding time, resists clogging, is pinhole free, and stain resistant.
Effectively fills grind marks and pinholes with its two-part polyester finishing and blending putty. Also excellent for use on uneven surfaces.
DISPOSAB MIXING P
Avoid contamin body filler. Great even touch up pa
1 GALLON
PER CASE
30 OUNCES
PER CASE
SBF1192
4
SBF1199
6
GRIP FILLER
POURABLE PUTTY
INDIVIDU
Perfect for galvanized steel, bare steel, and aluminum, Grip Filler is a lightweight body filler designed for easy clog-free sanding.
Easy to spread and designed for filling, skim coating, body work, pinholes, grind marks, low spots, and other surface imperfections.
Premium Spread use with SMART B
Contour Spreade spreaders are gre
1 GALLON
3 GALLONS
24 OUNCES
PER CASE
SBF1182
SBF1184
SBF1193
6
LIGHT WEIGHT BODY FILLER
KOMBI PUTTY
PREMIUM
An economical solution to everyday body filler needs. This easy sanding and clog-free light weight filler combines great performance with an economical price.
Spreads evenly and dries quickly for last minute repairs.
This pack of Prem popular SMART s
1 GALLON
PER CASE
7.05 OZ
PER CASE
SBF1191
4
SBF210
6
00
10
SMART_catalog_version 10_V2.indd 10
BODY FILLER BODY FILLER 1/14/2019 9:58:16 AM
N
E
finishmaster.com
MIXING PALETTES MIXING •PALETTES SPREADERS • SPREADERS
Fiberglass reinforced Fiberglass body reinforced filler formulated body filler formulated with short strand with short fibers.strand Ideal for fibers. use Ideal on metal for use on metal and fiberglassand panels. fiberglass panels.
1 QUART 1 QUART
1 GALLON1 GALLON
SBF1195 SBF1195
SBF1196 SBF1196
Always useAlways a mixing use palette a mixingorpalette or disposabledisposable sheets designed sheets designed for body for body other materials filler. Cardboard filler. Cardboard and otherand materials may absorb andresin negatively and negatively mayresin absorb impact your impact mixed your product. mixed product.
DISPOSABLE DISPOSABLE SHEET SHEET MIXINGMIXING PALETTE PALETTE
REUSABLE REUSABLE PLASTICPLASTIC MIXINGMIXING PALETTE PALETTE
Avoid contamination Avoid contamination and improveand theimprove mix of the mix of body filler. Great bodyfor filler. mixing Greatfiller, for mixing putty, gel, filler,and putty, gel, and even touch upeven paint. touch Contains up paint. 75 sheets. Contains 75 sheets.
Keep contaminants Keep contaminants out of your out fillerofand your filler and plastic. Lightweight plastic.and Lightweight sturdy toand aid sturdy in easyto aid in easy mixing and application. mixing and application.
PART# PART#
SIZE
SMP1212 SMP1212
BODY FILLER BODY FILLER
MIXING MIXING PALETTES PALETTES ANDAND BODYBODY FILLER FILLER
SMARTGLASS SMARTGLASS
SIZE
PART# PART#
8½” x 11” 8½” x 11”
SIZE
SMP1700 SMP1700
SIZE
8½” x 17” 8½” x 17”
INDIVIDUAL INDIVIDUAL SPREADERS SPREADERS Premium Spreaders PremiumareSpreaders durable and are durable high quality, and high greatquality, for great for use with SMART useBody with Fillers. SMART Available Body Fillers. in four Available sizes. in four sizes.
PREMIUM PREMIUM
CONTOUR CONTOUR
Contour Spreaders ContourareSpreaders designedare for designed more flexibility. for more These flexibility. These spreaders arespreaders great for are usegreat on contours for use and on contours corners. and corners. 100 SPREADERS 100 SPREADERS PER CASE PER CASE
E
N
BODY FILLER
SMARTGLASS • MIXING PALETTES • SPREADERS
4”
4”
PREMIUMPREMIUM
SPS1204 SPS1204
CONTOURCONTOUR
SPS1304 SPS1304
5”
5”
6”
SPS1205 SPS1205
6”
SPS1206 SPS1206
PREMIUM PREMIUM SPREADER SPREADER 3-PACK3-PACK
METALMETAL SPREADER SPREADER 4-PACK4-PACK
This pack of Premium This packSpreaders of Premium includes Spreaders threeincludes of the most three of the most popular SMART popular spreader SMART sizes. spreader sizes.
Professional steel Professional blades designed steel blades for designed for body filler applications. body filler applications.
PART# PART#
CONTENTSCONTENTS
PART# PART#
CONTENTSCONTENTS
SPS1200 SPS1200
4”, 5”, AND 4”, 6” SPREADER 5”, AND 6” SPREADER
SPS1500 SPS1500
4 METAL SPREADERS 4 METAL SPREADERS
BODY BODY FILLER FILLER BODY FILLER SMART_catalog_version 10_V2.indd 11
00 0011 1/14/2019 9:58:34 AM
WIPES
finishmaster.com PREMIUM • ALL PURPOSE • PAPER WIPES • CLOTHS PREMIUM PREMIUM • ALL PURPOSE • ALL PURPOSE • PAPER• WIPES PAPER •WIPES PRECISION-FIBER • PRECISION-FIBER • WIPING • WIPING CLOTHSCLOTHS
WIPESWIPES
PREMIUM PREMIUM WASHWASH & DRY & DRY CLOTHS CLOTHS
ALL PURPOSE ALL PURPOSE WIPES WIPES
® SMART SMA
Durable, Durable, lint-free lint-free wiping cloths wiping cloths made from made anfromexceptionally an exceptionally strong strong and super-absorbent and super-absorbent material.material. Ideal for paint Ideal for booth paint andbooth and prep areas. prepTheareas. dispenser The dispenser box fits box fits in most standard in most standard wire racks. wire racks.
Great forGreat any job, for this any mid-weight job, this mid-weight DRC wiping DRCcloth wiping cloth combinescombines a soft, touchable a soft, touchable outer layer outer withlayer a highly with a highly absorbentabsorbent inner layer. inner Available layer. Available in two sizes. in two sizes.
SMART® by SMART Pur and compound and c
8” COM8
PA
4” COM4 PART#PART#
SHEETSHEET SIZE SIZE
SHEETSHEET COUNTCOUNT
SWP4SBSWP4SB
12” x 16½” 12” x 16½”
100
SMT1019SMT1019
9” x 15”9” x 15”
352
PART#PART#
SHEETSHEET SIZE SIZE
SHEETSHEET COUNTCOUNT
100
SMT1015SMT1015
9” x 15”9” x 15”
352
352
352
SMT1017SMT1017
12” x 12½” 12” x 12½”
56
56
PA
PAPER PAPER WIPES WIPES
SMART SMAC
Two varieties Two varieties of wipe rolls of wipe available rolls available for shop and for shop janitorial and janitorial needs. Designed needs. Designed to fit existing to fit existing dispensersdispensers and available and available in white two-ply in whiteand two-ply blueand four-ply. blue four-ply.
A full lineAoffullhi painting painti or pri is designed is desi to a
800 TWO-PLY 800 TWO-PLY SHEETSSHEETS
325 TWO-PLY 325 TWO-PLY SHEETSSHEETS
375 FOUR-PLY 375 FOUR-PLY SHEETSSHEETS
PART#PART#
SWP1LRSWP1LR
SWP1SRSWP1SR
SWP2SRSWP2SR
SHEETSHEET SIZE SIZE
9” x 15”9” x 15”
9” x 15”9” x 15”
11” x 15”11” x 15”
DISPENSER DISPENSER (FOR SWP1SR) (FOR SWP1SR)
PART#: SWP1SRD PART#: SWP1SRD
QUARTQ
GALLONGA
*NOT AVAILAB *NOT
PRECISION-FIBER PRECISION-FIBER CLOTH CLOTH
WIPING WIPING CLOTHS CLOTHS
SCUFFIN SCU
PrecisionPrecision Fiber Cloths Fiberare Cloths madearefrom madeabsorbent from absorbent natural natural fibers hydro-entangled fibers hydro-entangled with strong with polymer strong polymer filaments.filaments. Remains Remains durable durable in water,inpaint, water,stain, paint,grease, stain, oil, grease, and oil, and solvents. solvents.
These General ThesePurpose General Wiping PurposeCloths WipingareCloths are made from made washed from and washed recycled and recycled cotton cotton knit. Convenient knit. Convenient punch-out punch-out boxes make boxes make it easy toitstore easyand to store use. and use.
SMART Scuffing SMART creating the creati pe Perfect for Perfec cl bumpersbump as we and easyand cleane
12
PART#PART#
SIZE SIZE
SMT1050SMT1050
13.6” x 15” 13.6” x 15”
0000
SMART_catalog_version 10_V2.indd 12
RAG COUNT RAG COUNT 50
50
#10 BOX #10 BOX
#25 BOX #25 BOX
RAG10-1W RAG10-1W
RAG25-1W RAG25-1W
WIPES WIPES WIPES 1/14/2019 9:58:45 AM
finishmaster.com
SMART BY PURIS™ • CLEANERS • SCUFFING SOAP • WAX & GREASE REMOVER TM SMART SMART BY PURIS BYTMPURIS • CLEANERS • CLEANERS • SCUFFING • SCUFFING SOAP • SOAP WAX &• WAX GREASE & GREASE REMOVER REMOVER
PURIS™/CLEANERS
TM TM PURISPURIS /CLEANERS /CLEANERS
® ™ ™ SMART SMART BY®PURIS BY PURIS ™ SMART® by SMART Puris®™byisPuris a premium is a premium EuropeanEuropean compounding compounding and finishing and finishing system available system available exclusivelyexclusively from FinishMaster. from FinishMaster. A two-step A two-step system with system fourwith components: four components: compound, compound, polish, finishing polish, finishing spray, spray, and compounding pad, thesepad, products are bodyshop safe and safe easyand to use. the highest materials, this system flawlessafinish. and compounding these products are bodyshop easyCreated to use.with Created with thequality highestraw quality raw materials, thisdelivers systemadelivers flawless finish.
8” COMPOUNDING 8” COMPOUNDING PAD PAD PART#: SBP284 PART#: SBP284
4” COMPOUNDING 4” COMPOUNDING PAD PAD PART#: SBP234 PART#: SBP234
A1+ PURE A1+COMPOUND PURE COMPOUND
A15 PURE A15POLISH PURE POLISH
A66 SHOWROOM A66 SHOWROOM GLOW GLOW
52
QUARTQUART
SMTA132SMTA132
SMTA1532 SMTA1532
SMTA6618 SMTA6618 (18 OUNCES) (18 OUNCES)
6
GALLONGALLON
SMTA1GSMTA1G
SMTA15G SMTA15G
SMTA661G SMTA661G
TCOUNT
SMART SMART CLEANERS CLEANERS A full lineAoffullhigh-quality line of high-quality cleaners cleaners and surface andprep surface products prep products for most for body most shop body processes. shop processes. Final Wipe Final Solvent Wipe(SMT622) Solvent (SMT622) is perfectisfor perfect use around for usemoldings around moldings and for minor and forclean-up minor clean-up prior to prior to painting painting or priming. or priming. Zero VOCZero Anti-Static VOC Anti-Static Surface Cleaner Surface(SMT623) Cleaner (SMT623) is a ready-to-use is a ready-to-use waterborne waterborne surface cleaner surfacespecifically cleaner specifically for areasfor withareas low with VOC regulations. low VOC regulations. Plastic Parts Plastic Cleaner Parts(SMT624) Cleaner (SMT624) is designed is designed to aid thetoadhesion aid the adhesion of primeroforprimer topcoats or topcoats over difficult overbare difficult plastics. bare plastics.
EETS
FINAL FINAL WIPE SOLVENT WIPE SOLVENT
ANTI-STATIC ANTI-STATIC SURFACE SURFACE CLEANER CLEANER
ZERO VOC ZERO VOC
QUARTQUART
SMT622-4* SMT622-4*
SMT623-4 SMT623-4
GALLONGALLON
SMT622-1* SMT622-1*
SMT623-1 SMT623-1
PLASTIC PLASTIC PARTSPARTS CLEANER CLEANER SMT624-4* SMT624-4*
*NOT AVAILABLE IN VOC REGULATED *NOT AVAILABLE IN VOC REGULATED AREAS AREAS
SCUFFING SCUFFING SOAPSOAP
WAXWAX & GREASE & GREASE REMOVER REMOVER
SMART Scuffing SMART Soap Scuffing aidsSoap paintaids adhesion paint adhesion by by creating the creating perfect thesurface perfectprep surface conditions. prep conditions. Perfect for Perfect cleaning for cleaning and prepping and prepping plastic plastic bumpersbumpers as well asasblend well as areas. blendEasy areas. to use Easy to use and easyand cleanup easy with cleanup water. with water.
100% virgin 100%solvent-based virgin solvent-based pre-cleaner pre-cleaner for for thoroughly thoroughly cleaning cleaning and removing and removing wax, wax, grease, and grease, silicones and from silicones surfaces. from surfaces.
QUARTQUART
PAIL (80 PAILOUNCES) (80 OUNCES)
PART#PART#
NET WEIGHT NET WEIGHT
SMT621-4 SMT621-4
SMT621-1 SMT621-1
SMT300-1 SMT300-1
1 GALLON 1 GALLON
TM TM PURIS™/CLEANERS SMART SMART BYBY PURIS PURIS /CLEANERS /CLEANERS SMART_catalog_version 10_V2.indd 13
000013 1/14/2019 9:58:45 AM
BUFFING PADS
BUFFING BUFFING PADSPADS
finishmaster.com
WAFFLE FOAM PADS • WOOL PADS • FOAM PADS WAFFLEWAFFLE FOAM PADS FOAM•PADS WOOL• PADS WOOL•PADS FOAM•PADS FOAM PADS
WAFFLE WAFFLE FOAMFOAM PADSPADS Our waffle Ourfoam waffle facefoam design faceallows designforallows a cooler for asurface cooler while surface compounding while compounding and polishing. and polishing. RecessedRecessed back pads back provide pads easy provide self-centering easy self-centering with excellent with excellent edge protection. edge protection. Flat padsFlat provide pads aprovide a higher profile higheroffprofile the backing off the backing pad. All are pad.velcro-backed All are velcro-backed for easy for change. easy change.
RECESSED RECESSED BACK BACK
FLAT BACK FLAT BACK
FLAT BACK FLAT BACK
COMPOUNDING COMPOUNDING
9” SBP2812 9” SBP2812
9” SBP281 9” SBP281
3½” SBP310 3½” SBP310
POLISHING POLISHING
8” SBP2822 8” SBP2822
8” SBP282 8” SBP282
3½” SBP311 3½” SBP311
FINISHING FINISHING
8” SBP2832 8” SBP2832
8” SBP283 8” SBP283
3½” SBP312 3½” SBP312
QUANTITY: QUANTITY: 1 1
QUANTITY: QUANTITY: 2 2
QUANTITY: QUANTITY: 2 2
WOOL WOOL PADSPADS 100% wool 100% four-ply wool four-ply twist make twistformake exceptional for exceptional compounding compounding pads. Polishing pads. Polishing pads arepads a single-ply are a single-ply twist fortwist smooth for smooth results. Recessed results. Recessed back areback velcro-backed are velcro-backed for easy for change, easy change, while double whilesided double sided are ⅝” with are ⅝” a coarse with a11coarse thread. 11 thread.
RECESSED RECESSED BACK BACK COMPOUNDING COMPOUNDING
7½” SBP754 7½” SBP754
DOUBLE DOUBLE SIDEDSIDED
4” SBP304 4” SBP304
8” SBP804 8” SBP804
POLISHING POLISHING
8” SBP801 8” SBP801
FOAMFOAM PADSPADS Reticulated Reticulated polyesterpolyester foam designed foam designed for light for compounding light compounding and polishing and polishing at 1,200-1,750 at 1,200-1,750 RPM. Available RPM. Available in both recessed in both recessed back andback flat and backflat options. back options. Velcro-backed Velcro-backed for easy for change. easy change.
FINISHING FINISHING POLISHING POLISHING
14
0000
SMART_catalog_version 10_V2.indd 14
RECESSED RECESSED BACK BACK
FLAT BACK FLAT BACK
9” SBP980 9” SBP980
4” SBP380 4” SBP380
RECESSED RECESSED BACK BACK
FLAT BACK FLAT BACK
GRIPGRI BA
Hook and Hook loopa
SI
7 9” SBP950 9” SBP950
4” SBP350 4” SBP350
BUFFING PADS BUFFING BUFFING PADS PADS 1/14/2019 9:59:24 AM
3
finishmaster.com
PART#PART#
0
SBPK1SBPK1
9”
9” COMPOUNDING WOOL COMPOUNDING WOOL PAD PAD
9”
9” FINISHING FOAM FINISHING FOAM PAD PAD
9”
9” POLISHING FOAM POLISHING FOAM PAD PAD
4”
WOOL PAD PAD 4” COMPOUNDING WOOL COMPOUNDING
4”
FOAM PAD PAD 4” FINISHING FOAM FINISHING
4”
FOAM PAD PAD 4” POLISHING FOAM POLISHING
SMALL SMALL PADPAD BUFFING BUFFING SYSTEM SYSTEM PART#PART#
SBPK2SBPK2
INCLUDES INCLUDES BACKING BACKING PLATE PLATE RECESSED RECESSED BACKBACK WAFFLE WAFFLE FOAMFOAM PADPAD KIT KIT
PART#PART#
SBPK3SBPK3
9”
9” WAFFLE FOAM COMPOUNDING WAFFLE FOAM COMPOUNDING PAD PAD
8”
WAFFLE FOAM ULTRAFINE POLISHING PAD PAD 8” WAFFLE FOAM ULTRAFINE POLISHING
8”
WAFFLE 8” WAFFLE FOAM POLISHING FOAM POLISHING PAD PAD
RECESSED RECESSED BACKBACK WAFFLE WAFFLE & WOOL & WOOL PADPAD KIT KIT
sided double sided
K
BUFFING PADS
BUFFING BUFFING PADSPADS
INCLUDES INCLUDES BACKING BACKING PLATE PLATE LARGE LARGE PADPAD BUFFING BUFFING SYSTEM SYSTEM
aprovide a
ge.
BUFFING PAD KITS • BACKING PLATES • ADAPTERS BUFFING BUFFING PAD KITS PAD• KITS BACKING • BACKING PLATESPLATES & ADAPTERS & ADAPTERS
PART#PART#
SBPK4SBPK4
7½” COMPOUNDING WOOL COMPOUNDING 7½” WOOL PAD PAD 8”
8” WAFFLE FOAM ULTRAFINE POLISHING WAFFLE FOAM ULTRAFINE POLISHING PAD PAD
8”
8” WAFFLE FOAM POLISHING WAFFLE FOAM POLISHING PAD PAD
INCLUDES INCLUDES BACKING BACKING PLATE PLATE 3½”3½” WAFFLE WAFFLE FOAMFOAM PADPAD KIT KIT
PART#PART#
SBPK5SBPK5
3½” WAFFLE FOAM COMPOUNDING 3½” WAFFLE FOAM COMPOUNDING PAD PAD 3½” WAFFLE FOAM ULTRAFINE POLISHING 3½” WAFFLE FOAM ULTRAFINE POLISHING PAD PAD 3½” WAFFLE FOAM POLISHING 3½” WAFFLE FOAM POLISHING PAD PAD
GRIPGRIP BACKING BACKING PLATES PLATES
DA GRIP DA GRIP BACKING BACKING PLATES PLATES
Hook and Hook loopand backing loop backing plate forplate buffing for pad buffing attachments. pad attachments.DA attachment DA attachment for buffing for pads. buffing pads.
SIZE SIZE
PART#PART#
SIZE SIZE
ADAPTERS ADAPTERS Tool adapters Tool adapters for SMART forbuffing SMART pads. buffing pads.
PART#PART#
TYPE TYPE
PART#PART#
7”
7”
SBP750SBP750
6”
6”
SBP170SBP170
DRILL ADAPTER DRILL ADAPTER
SBP5814 SBP5814
3”
3”
SBP305SBP305
3”
3”
SBP173SBP173
DA ADAPTER DA ADAPTER
SBP5816 SBP5816
BUFFING PADS BUFFING BUFFING PADS PADS SMART_catalog_version 10_V2.indd 15
000015 1/14/2019 9:59:26 AM
AEROSOLS
AEROSOLS AEROSOLS
finishmaster.com
PRIMERS • DTM PRIMERS • LACQUER • ENAMEL PRIMERS DTM PRIMERS • LACQUER • ENAMEL PRIMERS • DTM•PRIMERS • LACQUER • ENAMEL
PRIMERS PRIMERS
TRIMTRIB
Deepcob Deep black compo components. primer,primer remai durabledurabl matte
wide ofrange of primers A wideA range primers providing providing excellentexcellent coveragecoverage and adhesion. and adhesion. Can be Can usedbe used on a ofvariety of substrates. on a variety substrates.
PART PRIMER PRIMER
WELD-THRU WELD-THRU
ETCHING ETCHING
PRIMERS/SURFACERS PRIMERS/SURFACERS
SMT39
PART# PART# COLORCOLOR
SMT3918 SMT3918
SMT3924 SMT3924
SMT3919 SMT3919
SMT3921 SMT3921
SMT3925 SMT3925
SMT3926 SMT3926
LIGHT GRAY LIGHT GRAY
GRAY GRAY
GRAY GRAY
GRAY GRAY
BLACKBLACK
WHITEWHITE
NET WEIGHT NET WEIGHT
12 OUNCES 12 OUNCES
13 OUNCES 13 OUNCES
15.5 OUNCES 15.5 OUNCES
16 OUNCES 16 OUNCES
16 OUNCES 16 OUNCES
16 OUNCES 16 OUNCES
PAI PAINTA
Easy-to Easy-to-use h rocker rocker protec and co and corrosion
PRIMERS DTMDTM PRIMERS to metal Direct Direct to metal primers primers to match designeddesigned to match factory factory in primer primer colors. colors. AvailableAvailable in most popular and in-demand most popular and in-demand colors. colors.
PART
SMT29
NET WEIGHT: NET WEIGHT: 12 OZ 12 OZ
BLACKBLACK
PART# PART#
SMT3931 SMT3931
OLIVEOLIVE GREENGREEN LIGHTLIGHT GREENGREEN SMT3932 SMT3932
SMT3933 SMT3933
GRAYGRAY
TAN TAN
WHITE WHITE
SMT3934 SMT3934
SMT3935 SMT3935
SMT3938 SMT3938
LACQUER LACQUER & & ENAMEL ENAMEL
Professional Professional enamelenamel and and acrylic coatings in acrylic coatings availableavailable in differentdifferent finishes.finishes. ProvidesProvides excellentexcellent coveragecoverage and and dries quickly. dries quickly.
ADH ADHESI
Easy-to Easy-to-apply adhesi adhesion of to substra substrates inc surfaces.surface
PART
SMT39
HIGHHIGG ENAMEL ENAMEL
LACQUER LACQUER COLORCOLOR PART# PART# FINISH FINISH NET WEIGHT NET WEIGHT
BLACKBLACK
BLACKBLACK
BLACKBLACK
BLACKBLACK
BLACKBLACK
BLACKBLACK
WHITEWHITE
SMT3910 SMT3910
SMT3911 SMT3911
SMT3912 SMT3912
SMT3901 SMT3901
SMT3902 SMT3902
SMT3903 SMT3903
SMT3904 SMT3904
SATIN SATIN
FLAT FLAT
GLOSSGLOSS
SATIN SATIN
GLOSSGLOSS
FLAT FLAT
GLOSSGLOSS
12 OUNCES 12 OUNCES
15 OUNCES 15 OUNCES
12 OUNCES 12 OUNCES
12 OUNCES 12 OUNCES
12 OUNCES 12 OUNCES
12 OUNCES 12 OUNCES
12 OUNCES 12 OUNCES
Idealcoc Ideal clear new c new cut-ins, repairs.repairs Blend andquic dr and dries
PART
SMT39
16
0000
SMART_catalog_version 10_V2.indd 16
AEROSOLS AEROSOLS AEROSOLS 1/14/2019 9:59:46 AM
finishmaster.com
MISCELLANEOUS AEROSOLS TRIM/UNDERCOAT • ADHESIVE • HG CLEAR GUN CLEANER • BLEND • PROMOTER BLACKBLACK TRIM/UNDERCOAT • ADHESIVE • HG CLEAR • GUN•CLEANER • BLEND • PROMOTER
TRIM BLACK TRIM BLACK
Deep coating black coating for automotive Deep black for automotive trim trim components. This product requires components. This product requires no no and todries primer,primer, remainsremains flexible,flexible, and dries a to a durabledurable matte matte finish. finish.
TRIMADHESIVE ADHESIVEREMOVER
AEROSOLS
AEROSOLS AEROSOLS
PAINTABLE UNDERCOAT ADHESIVE REMOVER high-build undercoating for Built toEasy-to-use cut through the peskiest rocker soundleftdampening, adhesives and protection, remove residue Black in color. behind and by corrosion stickers, resistance. decals, tapes, moldings, and more.
cut through peskiest Super Built strongto and durable the adhesive. andand remove residue left Perfectadhesives for moldings trim pieces. behind by stickers, decals, tapes, moldings, and more.
*NOT AVAILABLE IN REGULATED AREAS
*NOT AVAILABLE IN REGULATED AREAS
PART# NET WEIGHT NET WEIGHT PART#
PART# NET WEIGHT NET WEIGHT PART#
PART# NET WEIGHT NET WEIGHT PART#
SMT3922 SMT3922
SMT3945* SMT3944
SMT2926 SMT3945*
15 OUNCES 15 OUNCES
12 OUNCES 12 OUNCES
17.7 OUNCES 12 OUNCES
3926
HITE
UNCES
HITE
3938
WHITE
MT3904 4
GLOSS
OUNCES S
PAINTABLE UNDERCOAT ADHESION PROMOTER Easy-to-use high-buildaerosol undercoating for the Easy-to-apply increases rockeradhesion protection, sound of top coat dampening, materials to most and corrosion resistance. in color.painted substrates includingBlack previously surfaces.
GRAY OR BLACK CHIP GUARD POWDER COAT GUIDE
QUICK CLEAN GUN CLEANER
Equipped two tips to implement basedfrom on build and texture preference Usewith between every step of sanding A heavy-duty blend of virgin solvents Available in gray & black. Duplicates fillers to primers, highlightingand lowmatches or all OEM gravel and chip whichprotection. act quickly to clean spray Also used for sound dampening inner panels and cover welding/grinding marks and aerosol spray tips. Straw high spots, or any imperfection left equipment behind. Dries instantly. Doesn’t clog or attached for tight spots. block abrasives. Suitable for wet or dry sanding.
COLOR
PART#
NETAVAILABLE WEIGHTIN REGULATED AREAS *NOT
PART# PART# NET WEIGHT NET WEIGHT
PART#
GRAY NET WEIGHT SMT3950
16PART# OUNCES
NET WEIGHT
SMT2926 SMT3920
SMT3990
BLACK 12 OUNCES
SMT3951
16 OUNCES SMT3999*
14.11 OUNCES
17.7 OUNCES 11.3 OUNCES
ADHESION PROMOTER HIGH GLOSS CLEAR
POWDER COAT GUIDE AEROSOL BLENDER
QUICK CLEAN GUN CLEANER UNIVERSAL BLEND
Easy-to-apply Ideal clearaerosol coat forincreases small areasthesuch as adhesion top coat door materials to most newof cut-ins, jambs, and spot substrates including painted repairs. Blendspreviously well with spray patterns surfaces. and dries quickly.
Use between of sanding Perfectevery for step blending edgesfrom seamlessly fillers to highlighting low or finish andprimers, effortlessly. Invisible blended high spots, or any &imperfection left coats. on clearcoats solid color top behind.Reduces Dries instantly. Doesn’t or no polish time –noclog cleanup, block abrasives. wet ortodryincrease waste, noSuitable mess for option sandingproductivity.
A heavy-duty of virgin solventscustom Acts as blend a blank for creating which aerosols act quickly to clean spray from urethanes, enamels, or equipment aerosolCompliant spray tips.for Straw otherandpaints, shop use attached tightfor spots. andforgreat industrial applications.
*NOT AVAILABLE IN REGULATED AREAS
PART# PART# NET WEIGHT NET WEIGHT
PART# PART# NET WEIGHT NET WEIGHT
PART# PART# NET WEIGHT NET WEIGHT
SMT3920 SMT3940
SMT3990 SMT3942
SMT3999* SMT3923
11.3 OUNCES 15.5 OUNCES
CHIP GUARD HIGH GLOSS CLEAR
12 OUNCES 12 OUNCES
AEROSOL BLENDER
Equipped withsmall twoareas tips such to implement based on buildPerfect and texture Ideal clear coat for as for blending edges seamlessly preference. grayspot & black. Duplicates and matches all OEM Invisible blended finish new cut-ins, doorAvailable jambs,inand and effortlessly. andwell chip protection. Also used for sound dampeningoninner panels & solid color top coats. repairs.gravel Blends with spray patterns clearcoats andquickly. cover welding/grinding marks. and dries Reduces polish time –no cleanup, no waste, no mess option to increase productivity
14.11 OUNCES 8.4 OUNCES
UNIVERSAL BLEND Deep black coating for automotive trim components. This product requires no primer, remains flexible, and dries to a durable matte finish.
COLOR
PART#
NET WEIGHT
PART#GRAY
SMT3950 NET WEIGHT
16 OUNCESPART#
NET WEIGHT
PART#
NET WEIGHT
SMT3940BLACK
SMT3951 15.5 OUNCES
16 OUNCESSMT3942
12 OUNCES
SMT3923
8.4 OUNCES
AEROSOLS AEROSOLS AEROSOLS SMART_catalog_version 10_V2.indd 17
0000 17 2/1/2019 11:59:48 AM
CLEARS & PRIMERS
CLASSIC & EURO CLEARS • SPEED CLEAR • DTM PRIMER • 1K/2K PRIMER CLASSIC/EURO CLEARS • SPEED CLEAR • DTM PRIMER • 2K & 1K PRIMERS
CLEARS & PRIMERS
finishmaster.com
DET
CLASSIC & EURO CLEARS & ACTIVATORS
Gener of inte
Classic Clear coat available in gallons or quarts and Classic Activators are available in quarts or half pints. Classic 4.2 VOC time between coats: 5-7 minutes. Classic 2.1 VOC time between coats: 12-15 minutes.
Auto B shop s
Euro Clear coat available in 5 liters and Euro Activators are available in 2.5 liters. Euro 4.2 VOC time between coats: 5-10 minutes. Euro 2.1 VOC time between coats: 5-8 minutes.
Ready that d
Silicon body s
ACTIVATORS
CLEAR COAT
SLOW
MEDIUM
Acid-B penetr
FAST
GALLON
QUART
QUART
0 PINT
QUART
0 PINT
QUART
0 PINT
CLASSIC 4.2 VOC
4142-1
4142-4
4110-4
4110-16
4111-4
4111-16
4112-4
4112-16
CLASSIC 2.1 VOC
4121-1
4121-4
4100-4
4100-16
4101-4
4101-16
4102-4
4102-16
5 LITERS
20 LITERS
20 LITERS
20 LITERS
EURO 4.2 VOC
4342-5L
4310-2.5L
4311-2.5L
4312-2.5L
EURO 2.1 VOC
4321-5L
4300-2.5L
4301-2.5L
4302-2.5L
SPEED CLEAR & ACTIVATOR
DTM PRIMER & ACTIVATOR
Speed Clear coat available in gallons. Speed Activator available in quarts.
DTM Primer available in gallons and DTM Activator available in quarts.
Time between coats: 3-5 minutes.
Time between coats: 8-10 minutes.
G
TAC SPEED CLEAR & ACTIVATOR VOC: 4.2
High-t dust fr
DTM PRIMER & ACTIVATOR VOC: 2.1
CLEAR - 1 GALLON
ACTIVATOR - 1 QUART
CLEAR - 1 GALLON
ACTIVATOR - 1 QUART
4242-1
4202-4
4400-1
4401-4
2K PRIMER & ACTIVATOR
1K PRIMER
2K Primer available in gallons. 2K Activator available in quarts.
1K Primer available in gallons.
GLA
Fast-a grime
Time between coats: 5-10 minutes.
Time between coats: 5-10 minutes.
*FPLACE RECOMMENDED. CAN BE USED WITH ANY QUALITY ACETONE.
2K PRIMER & ACTIVATOR VOC: NATIONAL RULE
PRIMER - 1 GALLON
ACTIVATOR - 1 QUART
PRIMER - 1 GALLON
ACTIVATOR
4500-1
4501-4
4600-1
FPLACE*
Not all products are available in regulated markets.
00
18
SMART_catalog_version 10_V2.indd 18
0
CLEARS& & PRIMERS CLEARS PRIMERS 1/14/2019 10:00:14 AM
T
finishmaster.com DETAILING
DETAILING SUPPLIES
DETAILING SOLUTION • TACK CLOTHS • GLASS CLEANER • MICROFIBER TOWELS DETAILING SOLUTIONS •ITEM TACKLIST CLOTHS • GLASS • ITEM LIST • CLEANER ITEM LIST••MICROFIBER ITEM LIST TOWELS
SECTION
DETAILING SOLUTIONS
UNIVERS
General Purpose Cleaner is a premium degreaser for a variety of interior and exterior applications.
Available in five s mix ratios to ens
Auto Body Car Wash is a highly concentrated, silicone free, and body shop safe soap. Banana scented and super-sudsing. Ready-To-Use Glass Cleaner is an environmentally friend formulation that dries quickly, is streak free, and leaves no residue. Silicone-Free Tire Dressing is a ready-to-use VOC compliant, body shop safe formula that produces a high-gloss shine. Acid-Based Wheel Cleaner is a highly concentrated formulated that penetrates deeply to remove dirt, road grime, brake dust, and more.
1 GALLON
5 GALLONS
4/CASE
CUP
1/CASE
6
GENERAL PURPOSE CLEANER/DEGREASER
SMT601-1
SMT601-5
LID
6
AUTO BODY CAR WASH
SMT602-1
SMT602-5
PER CAS
SILICONE-FREE TIRE DRESSING
SMT603-1
SMT603-5
GLASS CLEANER
SMT604-1
SMT604-5
PREMIUM
ACID-BASED WHEEL CLEANER
SMT605-1
SMT605-5
A double honed disposable blade
DILUTION RATIOS Product Name
When pouring off, use an appropriate container. Secondary container safety labels available at all FinishMaster locations upon request.
General Purpose Cleaner/Degreaser
New Product # SMT601
Dilution Ratios (Product:Water) Engines and Concrete Floors 1:1 Tires and Wheels 1:2 General Purpose Cleaning 1:10 Vinyl, Plastic, Carpet, and Upholstery 1:15
Auto Body/Car Wash
SMT602
2 oz. per 5 gallons of water
Acid-Based/Wheel Cleaner
SMT605
1:2 (recommended) or 1:1
TACK CLOTHS High-tack formulation, lint-free durable tack cloths completely remove surface particles, lint, and dust from surfaces. Made from 100% bleached soft cotton gauze that will not streak, mar, or crater.
PART#
SIZE
CONTENTS
PER BOX
NYLON S
SMT343
8½” x 12”
1
12
Lint-free nylon st no spillage. Avail paint systems. Av
GLASS CLEANER
MICROFIBER TOWELS
Fast-acting ammonia free glass cleaner dissolves dirt, grease, grit, and grime without leaving streaks or residue. Does not leave a film.
Perfect for use when removing waxes, polishes, and compounds during detailing and final cleanup. These towels leave a high-gloss finish.
PART#
NET WEIGHT
PART#
SIZE
FIN
SMT50
19 OUNCES
SBP1616
16” x 16”
SMT2
00 SMART_catalog_version 10_V2.indd 19
DETAILING SECTION
DETAILING SUPPLIES
00
19
1/14/2019 10:00:17 AM
SUPPLIES
MIXING CUPS • RAZOR BLADES • STRAINERS • PAINT GUN FILTERS • SPRAY BOTTLES MIXING CUPS • RAZOR BLADES • STRAINERS • PAINT GUN FILTERS • SPRAY BOTTLES
finishmaster.com SUPPLIES
UNIVERSAL MIXING CUPS Available in five sizes, these polyethylene mixing cups have a flat bottom and easy-to-read mix ratios to ensure accurate mixing. Matching lids in all fives sizes.
SE
0 PINT
1 PINT
1 QUART
20 QUARTS
5 QUARTS
CUP
CUP908
CUP916
CUP932
CUP980
CUP9160
LID
CUP908L
CUP916L
CUP932L
CUP980L
CUP9160L
PER CASE
100
100
100
50
25
PREMIUM RAZOR BLADES
PERFORMANCE RAZOR BLADES
A double honed razor blade providing longer life and cleaner cutting than most standard disposable blades.
Disposable single edge stainless steel razor blade ensures a smooth cut without chipping.
duct:Water)
e Floors 1:1
aning 1:10 and Upholstery 1:15
f water
or 1:1
PART#
BLADE TYPE
PART#
BLADE TYPE
SKN200-9
DOUBLE HONED
SKN100-9
SINGLE EDGE
NYLON STRAINERS
PAINT SPRAY GUN FILTERS
SPRAY BOTTLES & NOZZLES
Lint-free nylon strainers made of heavy rigid paper to ensure no spillage. Available for both solvent-based and waterborne paint systems. Available in cases of 1,000 strainers.
Disposable spray gun filters perfect for last chance removal of oils, aerosols, and moisture.
32 oz. spray bottles and nozzles perfect for body shop cleanup when using water and solvent-based cleaners. Spray bottle labels available for select SMART detail products.
tailing and final
6”
FINE
WATERBORNE
PART#
CONTENTS
BOTTLE
NOZZLE
SMT250
SMT252W
SMT2010
2 PACK
SMT510
SMT509
20 SMART_catalog_version 10_V2.indd 20
SUPPLIES SUPPLIES
00 1/14/2019 10:00:35 AM
ping.
S
p cleanup ray bottle
00
finishmaster.com SAFETY/BED LINER
SAFETY/BED LINER
• PAINT • SPRAY GLOVES • SPRAY SOCKSGLOVES • PAINT SUITSSUITS • BED LINERSSOCKS • BED LINER
GLOVES Black Nitrile Gloves feature textured fingertips, superior puncture resistance, and better tactile sensitivity over latex. Powder and latex free. Our powder-free Latex Examination Grade Gloves are form fitting, easy to wear, and feature a full textured grip with a beaded cuff.
BLACK NITRILE
SMALL
MEDIUM
LARGE
XL
XXL
SMT349
SMT350
SMT351
SMT352
SMT353
SMT320
SMT321
SMT322
LATEX
PAINT SUITS
3-WAY STRETCH SPRAY SOCKS
Available in six sizes, our paint suits offer long-lasting durability, can be machine washed, and provide excellent protection against over-spray.
Heavy-duty spray sock designed to be worn three different ways, depending on your use.
MEDIUM
SMT105
XXL
SMT108
*ACTUAL COLOR MAY VARY
LARGE
SMT106
3XL
SMT109
PART#
PER CASE
XL
SMT107
4XL
SMT110
SMT1600*
20
BLACK BED LINER
TINTABLE BED LINER
The ultimate addition to any truck bed.
Add customized color to your truck bed.
Includes four 750ml bottles of bed liner and one 750ml bottle of activator.
Includes four 750ml bottles of bed liner and one 750ml bottle of activator.
PART#
TYPE
PART#
TYPE
SMT2930
BLACK
SMT2931
TINTABLE
00 SMART_catalog_version 10_V2.indd 21
SAFETY/BED LINERS SAFETY/BED LINER
21 1/14/2019 10:00:45 AM
CHEMICALS/EQUIPMENT CHEMICALS/EQUIPMENT
finishmaster.com
CHEMICALS • WALL CABINET • DRYER/AIR FILTER UNIT • WORK STAND II CHEMICALS • WALL CABINET • DRYER/AIR FILTER • WORK STAND
CHEMICALS A full line of chemicals for all your professional applications.
1 GALLON
5 GALLONS
XYLENE
FPLXYL-1
FPLXYL-5
MINERAL SPIRITS
FPLMIN-1
FPLMIN-5
METHYL ETHYL KETONE
FPLMEK-1
FPLMEK-5
DENATURED ALCOHOL
FPLDEN-1
ISOPROPYL ALCOHOL
FPLIPA-5
TOLUENE
FPLTOL-5
1 GALLON
5 GALLONS
ACETONE
FPLACE-1
FPLACE-5
LACQUER THINNER
FPL50-1
FPL50-5
VOC COMPLIANT GUN/EQUIP. CLEANER
FPL100-1
FPL100-5
16 GALLONS
53 GALLONS FPLACE-53
FPL50-16
FPL50-53 FPL100-53
CHECK LOCAL REGULATIONS Be sure to check local regulations for the VOC compliance status of chemicals you are using.
WALL CABINET
DRYER/AIR FILTER UNIT
WORK STAND II
Rugged steel wall cabinet with durable powder coat finish and two galvanized adjustable shelves. The perfect solution to organizing and managing materials. No assembly required.
This wall-mounted air regulator provides clean, dry air to your shop. It has an airline shut off valve, 50 CFM capacity, and five micron particle filter.
Durable, heavy-duty, 500 lb. capacity work stand made of galvanized steel tubing. Perfect for bumpers, hoods, and fenders.
PART#
SIZE
PART#
MAX PSI
MAX TEMP
PART#
CAPACITY
VALFM-CABINET
35” x 30” x 9”
SMT2004
150
150° F
SWS500
500 POUNDS
00
22
SMART_catalog_version 10_V2.indd 22
CHEMICALS/EQUIPMENT CHEMICALS/EQUIPMENT 1/14/2019 10:00:50 AM
Distributed By: FINISHMASTER, INC. 115 W. Washington St., Suite 700S Indianapolis, IN 46204
888-311-3678
ARE REGISTERED TRADEMARKS OF GEARHEAD PRODUCTS, INC. AND ARE USED UNDER LICENSE BY FINISHMASTER, INC.
SMART Products are for Professional Use only.