SuperBrain BOX - all you need for HVAC automation SuperBrain-BOX is all in one smart solution for HVAC automation. Controller with pre-installed applications, power supply, fuse, power relays and connection terminals are build in nice looking and practical enclosure. Installation is very easy and fast as all peripheral devices (sensors, pumps, valves..) are connected directly to individual screw terminals. This reduces overall installation costs and gives the installer competitive advantage. SB-BOX is ideal solution also for OEMs. Pre-installed applications can be adopted for OEMs special needs. Controller covers standard communication protocols as MODBUS/BacNet and can be integrated into SCADA or BMS systems without additional costs. Operation can be monitored on color graphical screen and operate via buttons on device or via build-in web server over internet with any device with web browser (PC, smart phone, tablet PC - Android or IOS...).
TCP/IP
... remotely control your HVAC devices over the WEB Why SB-BOX is best solution for you? Why to choose SB-BOX?
1 3
Easy and cost effective installation. Installation is very easy and fast as all peripheral devices (sensors, pumps, valves..) are individualy connected directly to screw terminals. Easy monitoring and operating via color graphical display and/or via internet enable a comfortable user experience.
2 4
Pre-installed applications ready to use. SB-BOX is delivered with pre-installed applications, but if there are special needs applications can be easily adopted as SB controller is freely programmable. An integrated WEB server, BACnet and MODBUS connectivity as standard. No additional costs for integration in BMS.
BACnet and Modbus communication as standard The Superbrain BOX supports several communication options: built-in RS485 communication interface for MODBUS or Bacnet MS/TP master/slave. In Master mode it can monitor up to 400 points (heat-pumps, frequency converters, airconditioning, electric meters, etc.). BACnet and MODBUS TCP/IP communication protocol Inbuild WEB server for remote operation connection of M-BUS devices (Special version enables up to 8 (24) devices).
Highlights All in One solution No need for an expensive switching board Easy and cost effective installation All peripheral elements are connected directly to individual screw terminals Pre-installed applications Special applications on request
SB-BOX has wide range of possible usage
Color graphical display for easy monitoring and operating the plant WEB connectivity (RJ45) and RS485 as standard BACnet and MODBUS protocol for easy integration in BMS or SCADA systems Email (SMS) notifications in case of alarms
Automation of Air handling units Automation of heating/cooling plants Automation of residential buildings Individual room automation Energy monitoring solutions Modbus to BACnet Converter...
Connection terminals
SB-BOX’s enclosure is adapted for mounting on the wall and prepared for direct connection of all the connector terminals of the peripheral components (pumps, actuators, sensors). The installation on site is easy, the commissioning of the system can be done quickly and cost effective. Technical data: Max power: 1380 VA (6A) Modern color display 320x240 LCD Housing dimensions: 213x185x84 mm (LxWxD) Weight: 1450 g Inputs/outputs: Digital inputs: D1...D4 4x (dry-contacts) Universal inputs U1...U8 8x (0-10 V DC, Ni1000, Pt1000, “dry-contacts”) Digital outputs M1...M4 4x 230V maximal 3A (per output) Digital outputs S1, S2 2x “dry-contacts” maximal 4A (per output) Digital output P1...P4 4(2)x 230 V maximal 1A (on output) Analog output A1...A4 2(4)x 0...10V DC Power supply for active sensors: 24 V DC maximal 0,3 A
www.feniks-pro.com
FENIKS PRO d.o.o. Zagrebška cesta 90 SI-2000 Maribor Slovenia
Properties: - The WEB interface is shown in the same figure as in screen controller - Setting schedules on the device and via WEB interface - The possibility of integrating devices via MODBUS protocol (a heat pump, heatmeter etc..) - Sending alarms to email Communications: TCP / IP communication interface: ModBus, BACnet and WEB TCP / IP Rs485 communication interface: ModBus RTU and BACnet / MSTP on Rs485 supports master and slave mode
Any additional information, detailed technical data, ect. can be found on
www.feniks-pro.com info@feniks-pro.com