SERVICES DRAWINGS. ANY DISCREPANCY NOTICED SHALL BE BROUGHT TO THE ATTENTION OF THE CONSULTANTS AND RESOLVED AS SOON AS POSSIBLE, BUT ALWAYS PRIOR TO PROCUREMENT / EXECUTION OF WORKS.
8. ALL THE SERVICES DUCTS / CUT-OUTS ARE TO BE COVERED AFTER SERVICES PROVISIONS.
9. DRAWING APPROVAL IS FOR THE CONFORMITY WITH OUTLINE DESIGN INTENT AND DOES NOT RELIEVE THE CONTRACTOR/ SUBCONTRACTOR FROM FULL RESPONSIBILITY FOR THE ACCURACY, INTEGRATION AND FITNESS FOR PURPOSE OF DESIGN.
10. CONSTRUCTION MANAGER/PROJECT MANAGER TO REVERT BACK WITHIN 7 WORKING DAYS OF RECEIVING THE DRAWINGS ON COORDINATION AND BUILDABILITY ISSUES. IF OTHERWISE IT WOULD BE DEEMED THAT THEY HAVE UNDERSTOOD AND ACCEPTED THE DRAWING/DESIGN AND OWN FULL RESPONSIBILITY FOR THE WORKS CARRIED OUT ACCORDINGLY.
PROJECT: SITE:
103, DEFENCE COLONY CHHIBBER'S NEW DELHI
A-102 01-04-2022 AP FN CR FN BT 1 FN BT 2 FN CR FN CR FN CR FN BT 1 FN BT 1 FN BT 1 FN BT 2 FN BT 2 FN BT 2
LANDSCAPE CONSULTANT
SERVICES CONSULTANTS
Gurgaon: L 2/2 DLF PHASE II,GURGAON HARYANA-122002 P| 0124-4106949,4371361 M| 9811666949,9810155283 E| mail@parora.co.in
PRINCIPAL DESIGN CONSULTANT studiolotus
CLIENT: F-301, FIRST FLOOR, LADO- SARAI CH. PREM SINGH HOUSE, NEW DELHI - 110030 MOBILE (DIRECT): +91-9437184477
DRAWING TITLE: CHECKED BY : REV NO :
SCALE: DWG NO
SUNKEN COURT BELOW SUNKEN COURT BELOW SUNKEN COURT BELOW SERVICE SHAFT RESIDENT'S ELEVATOR SUNKEN COURT BELOW SERVICE ELEVATOR UP DN SPACE FOR CCTV RACK 640 [2'-1"] 270 [10"] 620 [2'-1"] 1815 [5'-10"] 620 [2'-1"] 740 [2'-6"] 4580 [15'] 6410 [20'-10"] 2625 [8'-9"] 580 [2'-1"] 850 [2'-11"] 2780 [9'-2"] 580 [2'-1"] 1930 [6'-3"] 2585 [8'-4"] 580 [2'-1"] 1745 [5'-10"] 1505 [5'] 1740 [5'-10"] 16895 [55'-5"] 7225 [23'-9"] 2600 [8'-4"] 4390 [14'-7"] 3015 [10'] 1950 [6'-3"] 3550 [11'-8"] 850 [2'-11"] 3650 [12'-1"] 4560 [15'] 6325 [20'-10"] 3630 [12'-1"] 1360 [4'-7"] 5865 [19'-2"] 1930 [6'-3"] 1185 [3'-9"] 2500 [8'-4"] 3565 [11'-8"] 1700 [5'-5"] 1800 [5'-10"] 4935 [16'-3"] 3005 [10'] 4850 [15'-10"] 2220 [7'-1"] 1690 [5'-5"] SLOPE 1:150 SLOPE 1:150 1800 [5'-10"] 4270 [14'-2"] 2400 [7'-11"] 1690 [5'-5"] 715 [2'-6"] 16915 [55'-5"] 30340 [99'-7"] 2885 [9'-7"] 2325 [7'-6"] 3420 [11'-3"] 1130 [3'-9"] 3900 [12'-11"] 1780 [5'-10"] 4830 [15'-10"] 2245 [7'-6"] 1:100 @ A3 P. Arora & Associates PVT. LTD. BALAJI AIRCON ENGINEERS Detail Rev. Date NOTE: 1. ALL DIMENSIONS ARE IN MILLIMETERS UNLESS SPECIFIED. 2. ALL LEVELS ARE IN MILLIMETERS. 3. THIS DRAWING IS A COPYRIGHT AND PROPERTY OF THE ARCHITECT, IS NOT TO BE PRODUCED, COPIED, HANDED OVER TO THIRD PARTY OR USED FOR ANY OTHER PURPOSE OTHER THAN FOR WHICH IT IS INTENDED. 4. THIS DRAWING IS TO BE READ AND NOT TO BE SCALED. 5. ALL DIMENSIONS SHALL BE VERIFIED ON SITE PRIOR TO START OF WORK ANY DISCREPANCY SHALL BE BROUGHT TO THE NOTICE OF THE ARCHITECT. 6. THE CONTRACTOR / PROJECT MANAGER MUST CHECK ALL DIMENSIONS AND DETAILS AND BE RESPONSIBLE FOR THE SAME. ANY DISCREPANCY SHALL BE NOTICE OF THE ARCHITECT. 7. THIS DRAWING SHALL BE READ IN CONJUNCTION WITH ALL RELEVANT ARCHITECTURAL, STRUCTURAL AND
DATE :
STRUCTURAL CONSULTANT R1
Stilt Floor Brickwork finishing layout
/ EXECUTION OF WORKS.
8. ALL THE SERVICES DUCTS / CUT-OUTS ARE TO BE COVERED AFTER SERVICES PROVISIONS.
9. DRAWING APPROVAL IS FOR THE CONFORMITY WITH OUTLINE DESIGN INTENT AND DOES NOT RELIEVE THE CONTRACTOR/ SUBCONTRACTOR FROM FULL RESPONSIBILITY FOR THE ACCURACY, INTEGRATION AND FITNESS FOR PURPOSE OF DESIGN.
10. CONSTRUCTION MANAGER/PROJECT MANAGER TO REVERT BACK WITHIN 7 WORKING DAYS OF RECEIVING THE DRAWINGS ON COORDINATION AND BUILDABILITY ISSUES. IF OTHERWISE IT WOULD BE DEEMED THAT THEY HAVE UNDERSTOOD AND ACCEPTED THE DRAWING/DESIGN AND OWN FULL RESPONSIBILITY FOR THE WORKS CARRIED OUT ACCORDINGLY.
PROJECT:
SITE:
NEW
CLIENT:
SERVICES CONSULTANTS
STRUCTURAL CONSULTANT
P| 0124-4106949,4371361
PRINCIPAL DESIGN CONSULTANT studiolotus
F-301, FIRST FLOOR, LADO- SARAI CH. PREM SINGH HOUSE, NEW DELHI 110030 MOBILE (DIRECT): +91-9437184477
DRAWING TITLE:
First
Floor Brickwork finishing layout
CHECKED BY :
DWG NO
REV NO
SCALE:
DELHI 1:100 @ A3
UP DN 2808 [9'-3"] 2584 [8'-6"] 1504 [4'-11"] 1576 [5'-2"] 4579 [15'] 4838 [15'-10"] 1500 [4'-11"] 2682 [8'-10"] 888 [2'-11"] 2340 [7'-8"] 1496 [4'-11"] 820 [2'-8"] 1855 [6'-1"] 825 [2'-8"] 2340 [7'-8"] 2722 [8'-11"] 5365 [17'-7"] 4849 [15'-11"] 1500 [4'-11"] 3282 [10'-9"] 2070 [6'-9"] 4620 [15'-2"] 2288 [7'-6"] 3870 [12'-8"] 2070 [6'-10"] 2780 [9'-1"] 1460 [4'-9"] 4080 [13'-5"] 1344 [4'-5"] 1810 [5'-11"] 1991 [6'-6"] 2325 [7'-8"] 2808 [9'-3"] 1672 [5'-6"] 1435 [4'-8"] 680 [2'-3"] 3094 [10'-2"] 968 [3'-2"] P. Arora & Associates PVT. LTD. BALAJI AIRCON ENGINEERS Detail Rev. Date NOTE: 1. ALL DIMENSIONS ARE IN MILLIMETERS UNLESS SPECIFIED. 2. ALL LEVELS ARE IN MILLIMETERS. 3. THIS DRAWING IS A COPYRIGHT AND PROPERTY OF THE ARCHITECT, IS NOT TO BE PRODUCED, COPIED, HANDED OVER TO THIRD PARTY OR USED FOR ANY OTHER PURPOSE OTHER THAN FOR WHICH IT IS INTENDED. 4. THIS DRAWING IS TO BE READ AND NOT TO BE SCALED. 5. ALL DIMENSIONS SHALL BE VERIFIED ON SITE PRIOR TO START OF WORK ANY DISCREPANCY SHALL BE BROUGHT TO THE NOTICE OF THE ARCHITECT. 6. THE CONTRACTOR / PROJECT MANAGER MUST CHECK ALL DIMENSIONS AND DETAILS AND BE RESPONSIBLE FOR THE SAME. ANY DISCREPANCY SHALL BE NOTICE OF THE ARCHITECT. 7. THIS DRAWING SHALL BE READ IN CONJUNCTION WITH ALL RELEVANT ARCHITECTURAL, STRUCTURAL AND SERVICES DRAWINGS. ANY DISCREPANCY NOTICED SHALL BE BROUGHT TO THE ATTENTION OF THE CONSULTANTS AND RESOLVED AS SOON AS POSSIBLE, BUT ALWAYS PRIOR TO PROCUREMENT
DATE :
LANDSCAPE CONSULTANT R1
103, DEFENCE COLONY CHHIBBER'S
Gurgaon: L 2/2 , DLF PHASE II,GURGAON HARYANA-122002
A-101-B 01-04-2022 AP 230 [9"] 1500 [4'-11"] 635 [2'-1"] 1815 [5'-11"] 900 [2'-11"] 550 [1'-10"] 1100 [3'-8"] 125 [5"] 125 [5"] 3805 [12'-6"] 1365 [4'-6"] 600 [2'] 1110 [3'-8"] 1170 [3'-10"] 850 [2'-9"] 4095 [13'-5"] 4210 [13'-10"] 4460 [14'-8"] 230 [9"] 4165 [13'-8"] 380 [1'-3"] 4210 [13'-10"] 2800 [9'-2"] 1845 [6'-1"] 1845 [6'-1"] 1570 [5'-2"] 4620 [15'-2"] 1530 [5'] 1570 [5'-2"] 1815 [5'-11"] 4265 [14'] 1775 [5'-10"] 800 [2'-7"] 3175 [10'-5"] 900 [2'-11"] 3500 [11'-6"] 1395 [4'-7"] 1530 [5'] 650 [2'-2"] 3090 [10'-2"] 1940 [6'-4"] 550 [1'-10"] 600 [2'] 4455 [14'-7"] 3345 [11'] 1700 [5'-7"] R1 GFC 27-01-2021 4815 [15'-10"] 4810 [15'-9"] 6845 [22'-5"] ALIGN DOORS ALIGN DOORS 230 [9"] 1185 [3'-11"] 1655 [5'-5"] 2340 [7'-8"] 2400 [7'-10"] 900 [2'-11"] FN CR FN BT 1 FN BT 2 FN BF FN BT 3 FN CR FN CR FN CR FN CR FN CR FN CR FN CR FN CR FN CR FN CR FN BT2 FN BT1 FN BT2 FN BT2 FN BT2 FN BT2 FN BT1 FN BT1 FN BT1 FN BT2 FN BT2 FN BT3 FN BT2 FN BT2 FN BT2 FN BF FN BF FN BF FN BF FN BT3 FN BT3 FN BT3 FN CR FN CR FN CR
M| 9811666949,9810155283 E| mail@parora.co.in
APPROVAL IS FOR THE CONFORMITY WITH
INTENT AND DOES NOT RELIEVE THE
SUBCONTRACTOR FROM FULL RESPONSIBILITY FOR THE ACCURACY, INTEGRATION AND FITNESS FOR PURPOSE OF DESIGN.
103, DEFENCE COLONY
CHHIBBER'S NEW DELHI
CLIENT:
LANDSCAPE CONSULTANT
SERVICES CONSULTANTS
layout A-102 01-04-2022 AP FN CR FN CR FN CR FN CR FN CR FN CR FN CR FN CR FN CR FN CR FN BT1 FN BT2 FN BT1 FN BT1 FN BT1 FN BT3 FN BT2 FN BT2 FN BT2 FN BF FN BF FN BF FN BF FN BT3 FN BT3 FN BT3 FN BT2 FN BT2 FN BT2 FN BT2 FN BT2 FN BT2 FN CR FN BT 1 FN BT 2 FN BF FN BT 3 FN CR FN CR FN CR
PRINCIPAL DESIGN CONSULTANT studiolotus
F-301, FIRST FLOOR, LADO- SARAI CH. PREM SINGH HOUSE, NEW DELHI 110030 MOBILE (DIRECT): +91-9437184477
10. CONSTRUCTION MANAGER/PROJECT MANAGER TO REVERT BACK WITHIN 7 WORKING DAYS OF RECEIVING THE DRAWINGS ON COORDINATION AND BUILDABILITY ISSUES. IF OTHERWISE IT WOULD BE DEEMED THAT THEY HAVE UNDERSTOOD AND ACCEPTED THE DRAWING/DESIGN AND OWN FULL RESPONSIBILITY FOR THE WORKS CARRIED OUT ACCORDINGLY. SCALE:
UP DN 2808 [9'-3"] 2584 [8'-6"] 1504 [4'-11"] 1576 [5'-2"] 4579 [15'] 4838 [15'-10"] 1500 [4'-11"] 2682 [8'-10"] 888 [2'-11"] 2340 [7'-8"] 1496 [4'-11"] 820 [2'-8"] 1855 [6'-1"] 825 [2'-8"] 2340 [7'-8"] 2722 [8'-11"] 5365 [17'-7"] 4849 [15'-11"] 1500 [4'-11"] 3282 [10'-9"] 2070 [6'-9"] 4620 [15'-2"] 2288 [7'-6"] 3870 [12'-8"] 2070 [6'-10"] 2780 [9'-1"] 1460 [4'-9"] 4080 [13'-5"] 2615 [8'-7"] 1014 [3'-4"] 1344 [4'-5"] 1810 [5'-11"] 1991 [6'-6"] 2325 [7'-8"] 2808 [9'-3"] 1672 [5'-6"] 1435 [4'-8"] 680 [2'-3"] 2400 [7'-10"] 4930 [16'-2"] 1500 [4'-11"] 4735 [15'-6"] 1800 [5'-11"] 2345 [7'-8"] 1530 [5'] 1070 1830 [6'] 230 [9"] 1500 [4'-11"] 635 [2'-1"] 1815 [5'-11"] 900 [2'-11"] 550 [1'-10"] 1100 [3'-8"] 125 [5"] 3805 [12'-6"] 1365 [4'-6"] 1110 [3'-8"] 850 [2'-9"] 4095 [13'-5"] 4210 [13'-10"] 230 [9"] 4165 [13'-8"] 380 [1'-3"] 2800 [9'-2"] 1845 [6'-1"] 1845 [6'-1"] 1570 [5'-2"] 4735 [15'-6"] 1570 [5'-2"] 1815 [5'-11"] 4265 [14'] 1775 [5'-10"] 900 [2'-11"] 3500 [11'-6"] 765 [2'-6"] 550 [1'-10"] 600 [2'] 4455 [14'-7"] 3345 [11'] 1700 [5'-7"] 4815 [15'-10"] 4810 [15'-9"] ALIGN DOORS 230 [9"] 1185 [3'-11"] 2340 [7'-8"] 2345 [7'-8"] 2400 [7'-10"]
CONSTRUCTION 565 [1'-10"] 3725 [12'-3"] 600 [2'] 1460 [4'-9"] 650 [2'-2"] 1940 [6'-4"] 900 [2'-11"] 3670 [12'] 6255 [20'-6"] 5780 [19'] 4575 [15'] B.O.S. HT 2875MM B.O.F.C HT 2575MM B.O.F.C HT 2575MM B.O.F.C HT 2575MM 925 [3'] 1:100 @ A3 P. Arora & Associates PVT. LTD. BALAJI AIRCON ENGINEERS Detail Rev. Date NOTE: 1. ALL DIMENSIONS ARE IN MILLIMETERS UNLESS SPECIFIED. 2. ALL LEVELS ARE IN MILLIMETERS. 3. THIS DRAWING IS A COPYRIGHT AND PROPERTY OF THE ARCHITECT, IS NOT TO BE PRODUCED, COPIED, HANDED OVER TO THIRD PARTY OR USED FOR ANY OTHER PURPOSE OTHER THAN FOR WHICH IT IS INTENDED. 4. THIS DRAWING IS TO BE READ AND NOT TO BE SCALED. 5. ALL DIMENSIONS SHALL BE VERIFIED ON SITE PRIOR TO START OF WORK ANY DISCREPANCY SHALL BE BROUGHT TO THE NOTICE OF THE ARCHITECT. 6. THE CONTRACTOR / PROJECT MANAGER MUST CHECK ALL DIMENSIONS AND DETAILS AND BE RESPONSIBLE FOR THE SAME. ANY DISCREPANCY SHALL BE NOTICE OF THE ARCHITECT. 7. THIS DRAWING SHALL BE READ IN CONJUNCTION WITH ALL RELEVANT ARCHITECTURAL,
8.
9.
GOOD FOR
STRUCTURAL AND SERVICES DRAWINGS. ANY DISCREPANCY NOTICED SHALL BE BROUGHT TO THE ATTENTION OF THE CONSULTANTS AND RESOLVED AS SOON AS POSSIBLE, BUT ALWAYS PRIOR TO PROCUREMENT / EXECUTION OF WORKS.
ALL THE SERVICES DUCTS / CUT-OUTS ARE TO BE COVERED AFTER SERVICES PROVISIONS.
DRAWING
OUTLINE DESIGN
CONTRACTOR/
DWG
DRAWING TITLE:
REV
NO
CHECKED BY :
NO
PROJECT: SITE:
DATE
:
STRUCTURAL CONSULTANT R1
Gurgaon: L 2/2 , DLF PHASE II,GURGAON HARYANA-122002 P| 0124-4106949,4371361 M| 9811666949,9810155283 E| mail@parora.co.in Second Floor Brickwork finishing
/ CUT-OUTS ARE TO BE COVERED AFTER SERVICES PROVISIONS.
9. DRAWING APPROVAL IS FOR THE CONFORMITY WITH OUTLINE DESIGN INTENT AND DOES NOT RELIEVE THE CONTRACTOR/ SUBCONTRACTOR FROM FULL RESPONSIBILITY FOR THE ACCURACY, INTEGRATION AND FITNESS FOR PURPOSE OF DESIGN.
10. CONSTRUCTION MANAGER/PROJECT MANAGER TO REVERT BACK WITHIN 7 WORKING DAYS OF RECEIVING THE DRAWINGS ON COORDINATION AND BUILDABILITY ISSUES. IF OTHERWISE IT WOULD BE DEEMED THAT THEY HAVE UNDERSTOOD AND ACCEPTED THE DRAWING/DESIGN AND OWN FULL RESPONSIBILITY FOR THE WORKS CARRIED OUT ACCORDINGLY.
PROJECT:
SITE:
DEFENCE COLONY
CLIENT:
SERVICES CONSULTANTS
STRUCTURAL CONSULTANT CHHIBBER'S NEW DELHI
Gurgaon: L 2/2 DLF PHASE II,GURGAON HARYANA-122002
P| 0124-4106949,4371361 M| 9811666949,9810155283 E| mail@parora.co.in
PRINCIPAL DESIGN CONSULTANT studiolotus
DRAWING TITLE:
Third
CHECKED BY REV NO :
SCALE: DWG NO :
UP DN 2808 [9'-3"] 2584 [8'-6"] 1504 [4'-11"] 1576 [5'-2"] 4579 [15'] 4838 [15'-10"] 1500 [4'-11"] 2682 [8'-10"] 888 [2'-11"] 2340 [7'-8"] 1496 [4'-11"] 820 [2'-8"] 1855 [6'-1"] 825 [2'-8"] 2340 [7'-8"] 2722 [8'-11"] 5365 [17'-7"] 4849 [15'-11"] 1500 [4'-11"] 3282 [10'-9"] 2070 [6'-9"] 4620 [15'-2"] 2288 [7'-6"] 3870 [12'-8"] 2070 [6'-10"] 2780 [9'-1"] 1460 [4'-9"] 4080 [13'-5"] 1344 [4'-5"] 1810 [5'-11"] 1991 [6'-6"] 2325 [7'-8"] 2808 [9'-3"] 1672 [5'-6"] 1435 [4'-8"] 680 [2'-3"] 25-03-2021 2400 [7'-10"] 4930 [16'-2"] 1500 [4'-11"] 4735 [15'-6"] 1800 [5'-11"] 2345 [7'-8"] 1530 [5'] 1075 [3'-6"] 1500 [4'-11"] 635 [2'-1"] 1815 [5'-11"] 900 [2'-11"] 550 [1'-10"] 1100 [3'-8"] 125 [5"] 3805 [12'-6"] 1110 [3'-8"] 850 [2'-9"] 4095 [13'-5"] 4210 [13'-10"] 230 [9"] 4165 [13'-8"] 380 [1'-3"] 2800 [9'-2"] 1845 [6'-1"] 1845 [6'-1"] 1570 [5'-2"] 4735 [15'-6"] 1570 [5'-2"] 1815 [5'-11"] 4265 [14'] 1800 [5'-11"] 900 [2'-11"] 3500 [11'-6"] 1940 [6'-4"] 550 [1'-10"] 600 [2'] 4455 [14'-7"] 3345 [11'] 1700 [5'-7"] 4815 [15'-10"] 4810 [15'-9"] ALIGN DOORS 230 [9"] 1185 [3'-11"] 2340 [7'-8"] 2345 [7'-8"] 2400 [7'-10"] 450 [1'-6"] 3725 [12'-3"] 600 [2'] 650 [2'-2"] 600 [2'] 1500 [4'-11"] MAINTAIN CLEAR 1500MM THROUGHOUT ALIGN WALL WITH BEAM ALIGN WITH BEAM ALIGN WITH BEAM 1720 [5'-8"] 900 [2'-11"] 2250 [7'-5"] 5950 [19'-6"] 366965 [1203'-11"] 5780 [19'] 6255 [20'-6"] 460395 [1510'-6"] B.O.S. HT 2875MM B.O.F.C HT 2575MM B.O.F.C HT 2575MM B.O.F.C HT 2575MM B.O.F.C HT 2575MM B.O.F.C HT 2575MM B.O.F.C HT 2575MM 1:100 @ A3 P. Arora & Associates PVT. LTD. BALAJI AIRCON ENGINEERS Detail Rev. Date NOTE: 1. ALL DIMENSIONS ARE IN MILLIMETERS UNLESS SPECIFIED. 2. ALL LEVELS ARE IN MILLIMETERS. 3. THIS DRAWING IS A COPYRIGHT AND PROPERTY OF THE ARCHITECT, IS NOT TO BE PRODUCED, COPIED, HANDED OVER TO THIRD PARTY OR USED FOR ANY OTHER PURPOSE OTHER THAN FOR WHICH IT IS INTENDED. 4. THIS DRAWING IS TO BE READ AND NOT TO BE SCALED. 5. ALL DIMENSIONS SHALL BE VERIFIED ON SITE PRIOR TO START OF WORK ANY DISCREPANCY SHALL BE BROUGHT TO THE NOTICE OF THE ARCHITECT. 6. THE CONTRACTOR PROJECT MANAGER MUST CHECK ALL DIMENSIONS AND DETAILS AND BE RESPONSIBLE FOR THE SAME. ANY DISCREPANCY SHALL BE NOTICE OF THE ARCHITECT. 7. THIS DRAWING SHALL BE READ IN CONJUNCTION WITH ALL RELEVANT ARCHITECTURAL, STRUCTURAL AND SERVICES DRAWINGS. ANY DISCREPANCY NOTICED SHALL BE BROUGHT TO THE ATTENTION OF THE CONSULTANTS AND RESOLVED AS SOON AS POSSIBLE, BUT ALWAYS PRIOR TO PROCUREMENT EXECUTION OF WORKS. 8. ALL THE SERVICES DUCTS
DATE
F-301, FIRST FLOOR, LADO- SARAI CH. PREM SINGH HOUSE, NEW DELHI - 110030 MOBILE (DIRECT): +91-9437184477 R1
LANDSCAPE CONSULTANT 103,
finishing layout A-103 01-04-2022 AP FN CR FN CR FN CR FN CR FN CR FN CR FN CR FN CR FN CR FN CR FN BT1 FN BT2 FN BT1 FN BT1 FN BT1 FN BT3 FN BT2 FN BT2 FN BT2 FN BF FN BF FN BF FN BF FN BT3 FN BT3 FN BT3 FN BT2 FN BT2 FN BT2 FN BT2 FN BT2 FN BT2 FN CR FN BT 1 FN BT 2 FN BF FN BT 3 FN CR FN CR FN CR
Floor Brickwork
WITH OUTLINE DESIGN INTENT AND DOES NOT RELIEVE THE CONTRACTOR/ SUBCONTRACTOR FROM FULL RESPONSIBILITY FOR THE ACCURACY, INTEGRATION AND FITNESS FOR PURPOSE OF DESIGN. 10. CONSTRUCTION MANAGER/PROJECT MANAGER TO REVERT BACK WITHIN 7 WORKING DAYS OF RECEIVING THE DRAWINGS ON COORDINATION AND BUILDABILITY ISSUES. IF OTHERWISE IT WOULD BE DEEMED THAT THEY HAVE UNDERSTOOD AND ACCEPTED THE DRAWING/DESIGN AND OWN FULL RESPONSIBILITY FOR THE WORKS CARRIED OUT ACCORDINGLY.
PROJECT:
SITE:
CLIENT:
SERVICES CONSULTANTS
STRUCTURAL CONSULTANT
Gurgaon: L 2/2 DLF PHASE II,GURGAON HARYANA-122002 P| 0124-4106949,4371361 M| 9811666949,9810155283 E| mail@parora.co.in
PRINCIPAL DESIGN CONSULTANT studiolotus
F-301, FIRST FLOOR, LADO- SARAI CH. PREM SINGH HOUSE, NEW DELHI - 110030
MOBILE (DIRECT): +91-9437184477
DRAWING TITLE:
Fourth Floor outer finishing layout
CHECKED BY : AP REV NO :
LANDSCAPE CONSULTANT DATE :
DWG NO
SCALE:
UP DN 10 18 17 16 15 14 13 12 11 CUT OUT IN TERRACE ROOF 10 11 12 13 14 15 16 DN 2808 [9'-3"] 1558 [5'-1"] 1412 [4'-8"] 3065 [10'-1"] 6144 [20'-2"] 600 [2'] 3365 [11'] 1810 [5'-11"] 2189 [7'-2"] 2976 [9'-9"] 2325 [7'-8"] 3965 [13'] 4440 [14'-7"] 2930 [9'-7"] 1230 [4'] 3274 [10'-9"] 2070 [6'-9"] 4635 [15'-2"] 2294 [7'-6"] 3875 [12'-9"] 2070 [6'-9"] 2780 [9'-1"] 1520 [5'] 4486 [14'-9"] 19490 [63'-11"] 11248 [36'-11"] 2559 [8'-5"] 1454 [4'-9"] P. Arora & Associates PVT. LTD. BALAJI AIRCON ENGINEERS Detail Rev. Date NOTE: 1. ALL DIMENSIONS ARE IN MILLIMETERS UNLESS SPECIFIED. 2. ALL LEVELS ARE IN MILLIMETERS. 3. THIS DRAWING IS A COPYRIGHT AND PROPERTY OF THE ARCHITECT, IS NOT TO BE PRODUCED, COPIED, HANDED OVER TO THIRD PARTY OR USED FOR ANY OTHER PURPOSE OTHER THAN FOR WHICH IT IS INTENDED. 4. THIS DRAWING IS TO BE READ AND NOT TO BE SCALED. 5. ALL DIMENSIONS SHALL BE VERIFIED ON SITE PRIOR TO START OF WORK ANY DISCREPANCY SHALL BE BROUGHT TO THE NOTICE OF THE ARCHITECT. 6. THE CONTRACTOR / PROJECT MANAGER MUST CHECK ALL DIMENSIONS AND DETAILS AND BE RESPONSIBLE FOR THE SAME. ANY DISCREPANCY SHALL BE NOTICE OF THE ARCHITECT. 7. THIS DRAWING SHALL BE READ IN CONJUNCTION WITH ALL RELEVANT ARCHITECTURAL, STRUCTURAL AND SERVICES DRAWINGS. ANY DISCREPANCY NOTICED SHALL BE BROUGHT TO THE ATTENTION OF THE CONSULTANTS AND RESOLVED AS SOON AS POSSIBLE, BUT ALWAYS PRIOR TO PROCUREMENT / EXECUTION OF WORKS. 8. ALL THE SERVICES DUCTS / CUT-OUTS ARE TO BE COVERED AFTER SERVICES PROVISIONS. 9. DRAWING APPROVAL IS FOR THE CONFORMITY
103, DEFENCE COLONY CHHIBBER'S NEW DELHI
GFC
R0 02/02/2021
R2 1:100 @ A3 01/04/2022 A-104B 4810 [15'-9"] 2465 [8'-1"] 2230 [7'-4"] 2400 [7'-10"] 5950 [19'-6"] 1185 [3'-11"] 2265 [7'-5"] 1930 [6'-4"] 1675 [5'-6"] 1815 [5'-11"] 1570 [5'-2"] 3765 [12'-4"] 3670 [12'] 4815 [15'-10"] 4620 [15'-2"] 2400 [7'-10"] 1800 [5'-11"] 2140 [7'] 1505 [4'-11"] 4655 [15'-3"] 3565 [11'-8"] 1800 [5'-11"] 1800 [5'-11"] 4500 [14'-9"] 5780 [19'] 1570 [5'-2"] 2740[ 9'] 4645 [15'-3"] 2340 [7'-8"] 3660 [12'] 1405 [4'-7"] 1015 [3'-4"] 2100 [6'-11"] 1100 [3'-7"] 4365 [14'-4"] 4735 [15'-6"] 3950 [13'] 3985 [13'-1"] 2375 [7'-10"] 2470 [8'-1"] 480 [1'-7"] 650 [2'-2"] 920 [3'] 550 [1'-10"] 1100 [3'-8"] 125 [5"] 900 [2'-11"] 550 [1'-4"] 900 [2'-11"] 650 [2'-2"] 795 [2'-7"] 3990 [13'-1"] 265 [10"] 380 [1'-3"] 975 [3'-2"] 325 [1'-1"] 575 [1'-11"] 430 [1'-5"] 2560 [8'-5"] 635 [2'-1"] 800 [2'-7"] 230 [9"] ALIGN EDGE OF BEAM WITH EDGE OF WALL 560 [1'-10"] 830 [2'-9"] 1695 [5'-7"] 600 [2'] 400 [1'-4"] 230 [9"] 850 [2'-9"] 3195 [10'-6"] 5600 [18'-4"] 2445 [8'] 860 [2'-10"] 1600 [5'-3"] 855 [2'-10"] FN CR FN BT 1 FN BT 2 FN BF FN BT 3 FN CR FN CR FN CR FN CR FN CR FN CR FN CR FN CR FN CR FN CR FN BT1 FN BT2 FN BT1 FN BT1 FN BT1 FN BT3 FN BT2 FN BT2 FN BT2 FN BF FN BF FN BT3 FN BT3 FN BT3 FN BT2 FN BT2 FN BT2 FN BT2 FN BT2 FN BT2 FN CR FN CR FN CR
OF THE CONSULTANTS AND RESOLVED AS SOON AS POSSIBLE, BUT ALWAYS PRIOR TO PROCUREMENT / EXECUTION OF WORKS.
8. ALL THE SERVICES DUCTS / CUT-OUTS ARE TO BE COVERED AFTER SERVICES PROVISIONS. 9. DRAWING APPROVAL IS FOR THE CONFORMITY WITH OUTLINE DESIGN INTENT AND DOES NOT RELIEVE THE CONTRACTOR/ SUBCONTRACTOR FROM FULL RESPONSIBILITY FOR THE ACCURACY, INTEGRATION AND FITNESS FOR PURPOSE OF DESIGN.
10. CONSTRUCTION MANAGER/PROJECT MANAGER TO REVERT BACK WITHIN 7 WORKING DAYS OF RECEIVING THE DRAWINGS ON COORDINATION AND BUILDABILITY ISSUES. IF OTHERWISE IT WOULD BE DEEMED THAT THEY HAVE UNDERSTOOD AND ACCEPTED THE DRAWING/DESIGN AND OWN FULL RESPONSIBILITY FOR THE WORKS CARRIED OUT ACCORDINGLY.
Terrace plan
PROJECT:
LANDSCAPE CONSULTANT
CONSULTANT
Gurgaon: L 2/2 , DLF PHASE II,GURGAON HARYANA-122002
P| 0124-4106949,4371361
M| 9811666949,9810155283 E| mail@parora.co.in
PRINCIPAL DESIGN CONSULTANT studiolotus
F-301, FIRST FLOOR, LADO- SARAI CH. PREM SINGH HOUSE, NEW DELHI 110030 MOBILE (DIRECT): +91-9437184477
DRAWING TITLE:
CHECKED BY : AP REV NO
DWG NO
SCALE:
+ 15295 FFL 855 [2'-10"] 16 DN + 15295 FFL 4360 [14'-4"] 13280 [43'-7"] 18110 [59'-5"] 2925 [9'-7"] 6965 [22'-10"] 2060 [6'-9"] 1950 [6'-5"] 2250 [7'-5"] 2050 [6'-9"] 11755 [38'-7"] 4240 [13'-11"] 7825 [25'-8"] 2250 [7'-5"] 3295 [10'-10"] 2070 [6'-9"] 11485 [37'-8"] 2070 [6'-9"] 2780 [9'-1"] 3420 [11'-3"] 1645 [5'-5"] 2930 [9'-7"] P. Arora & Associates PVT. LTD. BALAJI AIRCON ENGINEERS Detail Date NOTE: 1. ALL DIMENSIONS ARE IN MILLIMETERS UNLESS SPECIFIED. 2. ALL LEVELS ARE IN MILLIMETERS. 3. THIS DRAWING IS A COPYRIGHT AND PROPERTY OF THE ARCHITECT, IS NOT TO BE PRODUCED, COPIED, HANDED OVER TO THIRD PARTY OR USED FOR ANY OTHER PURPOSE OTHER THAN FOR WHICH IT IS INTENDED. 4. THIS DRAWING IS TO BE READ AND NOT TO BE SCALED. 5. ALL DIMENSIONS SHALL BE VERIFIED ON SITE PRIOR TO START OF WORK ANY DISCREPANCY SHALL BE BROUGHT TO THE NOTICE OF THE ARCHITECT. 6. THE CONTRACTOR / PROJECT MANAGER MUST CHECK ALL DIMENSIONS AND DETAILS AND BE RESPONSIBLE FOR THE SAME. ANY DISCREPANCY SHALL BE NOTICE OF THE ARCHITECT. 7. THIS DRAWING SHALL BE READ IN CONJUNCTION WITH ALL RELEVANT ARCHITECTURAL, STRUCTURAL AND SERVICES DRAWINGS. ANY DISCREPANCY NOTICED SHALL BE BROUGHT TO THE ATTENTION
STRUCTURAL
SERVICES CONSULTANTS 103, DEFENCE COLONY CHHIBBER'S NEW DELHI
R0 1:100 @ A3
A-105 01-04-2022 FN CR FN BT 1 FN BT 2 FN BF FN BT 3 FN CR FN CR FN BT 2 FN CR FN CR FN CR FN CR FN BT 2 FN BT 1 FN BT 1 FN BT 2 FN BT 2 1
GFC 02/02/2021
Terrace Floor Plan
1:100
IS FOR THE CONFORMITY WITH OUTLINE DESIGN INTENT AND DOES NOT RELIEVE THE CONTRACTOR/ SUBCONTRACTOR FROM FULL RESPONSIBILITY FOR THE ACCURACY, INTEGRATION AND FITNESS FOR PURPOSE OF DESIGN.
10. CONSTRUCTION MANAGER/PROJECT MANAGER TO REVERT BACK WITHIN 7 WORKING DAYS OF RECEIVING THE DRAWINGS ON COORDINATION AND BUILDABILITY ISSUES. IF OTHERWISE IT WOULD BE DEEMED THAT THEY HAVE UNDERSTOOD AND ACCEPTED THE DRAWING/DESIGN AND OWN FULL RESPONSIBILITY FOR THE WORKS CARRIED OUT ACCORDINGLY.
PROJECT:
103, DEFENCE COLONY
SITE:
CLIENT:
CHHIBBER'S NEW DELHI
LANDSCAPE CONSULTANT
SERVICES CONSULTANTS
STRUCTURAL CONSULTANT
Gurgaon: L 2/2 , DLF PHASE II,GURGAON HARYANA-122002 P| 0124-4106949,4371361 M| 9811666949,9810155283 E| mail@parora.co.in
PRINCIPAL DESIGN CONSULTANT studiolotus
F-301, FIRST FLOOR, LADO- SARAI CH. PREM SINGH HOUSE, NEW DELHI 110030 MOBILE (DIRECT): +91-9437184477
DRAWING TITLE:
FOURTH FLOOR SPIRAL STAIRCASE DRAWING
CHECKED BY AP REV NO
SCALE:
DWG NO
DATE :
STEP DIMENSIONS: WIDTH : 800MM RISER : 20MM TURNING ANGLE : 28.0 DEGREE 120 MM DIA MS ROUND HOLLOW SECTION STAIRCASE POLE WOODEN PROFILE STEPS 900 [2'-11"] STAIRCASE PEDESTAL BASE PLATE (REFER DETAIL 3) HANDRAIL MS ROUND HOLLOW SECTION 40 [2"] 40 [2"] 1 2 4 5 6 7 8 9 10 11 12 13 3 UP UP 55° 28° 400[1'-4"] 830 [2'-9"] 40 MM OFFSET FROM THE WALL 900 [2'-11"] 775[2'-6"] 120 MM DIA STAIRCASE POLE 30 MM THICK WOODEN PROFILE (DETAIL 4 C) 10 MM THICK MS PLATE (DETAIL 4 B) 12MM MS ROUND HOLLOW SECTION 775[2'-6"] 25 [1"] EQ 775[2'-6"] 50 [2"] 50 MM OVERLAPPING EQ 450 [1'-6"] 450 [1'-6"] 60 [2"] 200 MM RISER 28° 31° 31° 10 MM MS PLATE DEATIL B 30MM WOODEN PROFILE DETAIL C Ø120[Ø5"] 21° 330 [1'-1"] 800 [2'-7"] 775 [2'-7"] 450 [1'-6"] 31° 30 MM THICK WOODEN PROFILE 10 MM THICK MS PLATE MS BRACKET (DETAIL 4A) 800 [2'-7"] 775 [2'-7"] 680 [2'-3"] 120 MM DIA STAIRCASE POLE 90 [4"] 119 [5"] 740 [2'-5"] 25 [1"] 30 [1"] 40 [2"] 12MM MS ROUND HOLLOW SECTION 363 [1'-2"] 181 [7"] 181 [7"] 181 [7"] 90 [4"] 650 [2'-2"] 90 [4"] 90 [4"] 880 [2'-11"] 170 [7"] 430 [1'-5"] R86 [R3"] 40MM DIA ROUND WOODEN HANDRAIL 12MM CIRCULAR HOLLOW SECTION 400MM WIDE STEPS 40[2"] 200 [8"] 200 MM RISER120MM DIA METAL COLUMN 100MM DIA PIN 200X200X12MM MS PLATE SECTION E-E 200X200X12MM MS PLATE 130MM DIA METAL COLUMN 180 [7"] 180 [7"] 90 [4"] Ø120[Ø5"] 680 [2'-3"] 680 [2'-3"] 90 [4"] 40 [2"] 30 [1"] METAL BRACKET DETAIL A P. Arora & Associates PVT. LTD. BALAJI AIRCON ENGINEERS Detail Rev. Date NOTE: 1. ALL DIMENSIONS ARE IN MILLIMETERS UNLESS SPECIFIED. 2. ALL LEVELS ARE IN MILLIMETERS. 3. THIS DRAWING IS A COPYRIGHT AND PROPERTY OF THE ARCHITECT, IS NOT TO BE PRODUCED, COPIED, HANDED OVER TO THIRD PARTY OR USED FOR ANY OTHER PURPOSE OTHER THAN FOR WHICH IT IS INTENDED. 4. THIS DRAWING IS TO BE READ AND NOT TO BE SCALED. 5. ALL DIMENSIONS SHALL BE VERIFIED ON SITE PRIOR TO START OF WORK ANY DISCREPANCY SHALL BE BROUGHT TO THE NOTICE OF THE ARCHITECT. 6. THE CONTRACTOR / PROJECT MANAGER MUST CHECK ALL DIMENSIONS AND DETAILS AND BE RESPONSIBLE FOR THE SAME. ANY DISCREPANCY SHALL BE NOTICE OF THE ARCHITECT. 7. THIS DRAWING SHALL BE READ IN CONJUNCTION WITH ALL RELEVANT ARCHITECTURAL, STRUCTURAL AND SERVICES DRAWINGS. ANY DISCREPANCY NOTICED SHALL BE BROUGHT TO THE ATTENTION OF THE CONSULTANTS AND RESOLVED AS SOON AS POSSIBLE, BUT ALWAYS PRIOR TO PROCUREMENT / EXECUTION OF WORKS. 8. ALL THE SERVICES DUCTS / CUT-OUTS ARE TO BE COVERED AFTER SERVICES PROVISIONS. 9. DRAWING APPROVAL
1:100 @ A3 STEP DIMENSIONS: WIDTH 800MM RISER 20MM TURNING ANGLE 28.0 DEGREE
DETAIL AT EDGE
TO THE ATTENTION OF THE CONSULTANTS AND RESOLVED AS SOON AS POSSIBLE, BUT ALWAYS PRIOR TO PROCUREMENT / EXECUTION OF WORKS.
8. ALL THE SERVICES DUCTS / CUT-OUTS ARE TO BE COVERED AFTER SERVICES PROVISIONS. 9. DRAWING APPROVAL IS FOR THE CONFORMITY WITH OUTLINE DESIGN INTENT AND DOES NOT RELIEVE THE CONTRACTOR/ SUBCONTRACTOR FROM FULL RESPONSIBILITY FOR THE ACCURACY, INTEGRATION AND FITNESS FOR PURPOSE OF DESIGN.
10. CONSTRUCTION MANAGER/PROJECT MANAGER TO REVERT BACK WITHIN 7 WORKING DAYS OF RECEIVING THE DRAWINGS ON COORDINATION AND BUILDABILITY ISSUES. IF OTHERWISE IT WOULD BE DEEMED THAT THEY HAVE UNDERSTOOD AND ACCEPTED THE DRAWING/DESIGN AND OWN FULL RESPONSIBILITY FOR THE WORKS CARRIED OUT ACCORDINGLY.
DRAWING TITLE:
DWG NO
SCALE:
DRAWN BY CG CHECKED BY : AP REV NO :
780 150 30
A & B 6 MM MS BEND SHEET PROFILE 120MM DIA METAL COLUMN 5MM GAUGE 100MM DIA PIN 200X200X12MM MS PLATE SECTION E-E 4 NOS. M-16 RESIN HILTI BOLT HVU/HASE E E FLOOR LEVEL 4 NOS. M-16 RESIN HILTI BOLT HVU/HASE 200X200X12MM MS PLATE 120MM DIA METAL COLUMN 5MM GAUGE 90 [4"] 200 200 950 1150 40 X6 MM RECTANGULAR SECTION HANDRAIL 16MM CIRCULAR HOLLOW SECTION BALUSTERS 435MM WIDE STEPS 200 MM RISER 416 BENDED METAL SHEET REFER RENDERED IMAGE WELDED JOINT 6 MM THICK MS SHEET 6 MM MS BEND SHEET PROFILE (DETAIL EDGE A & B) 120 MM DIA HOLLOW SECTION STAIRCASE POLE 150 860 30 16MM MS ROUND HOLLOW SECTION 800 Ø120 398 R860 800 28° Ø120 398 R860 800 28° 6 MM MS BEND SHEET PROFILE R15 800 780 780 EDGE A EDGE B METAL SHEET PROFILE METAL SHEET EDGE BEND PROFILE 1 2 3 UP 800 436 28° 20 Ø120 R860 STEP DIMENSIONS: WIDTH 800MM RISER 200MM TURNING ANGLE : 28.0 DEGREE 900 40 40 900 1 2 4 5 6 7 8 9 10 11 12 13 3 UP UP 800 416 28° 55° 120 MM DIA MS ROUND HOLLOW SECTION STAIRCASE POLE STAIRCASE PEDESTAL BASE PLATE (REFER DETAIL 3) BALUSTERS 16MM MS BAR 40 MM OFFSET FROM THE WALL FROM WALL FINISH TO POLE CENTER P. Arora & Associates PVT. LTD. BALAJI AIRCON ENGINEERS Detail Rev. Date NOTE: 1. ALL DIMENSIONS ARE IN MILLIMETERS UNLESS SPECIFIED. 2. ALL LEVELS ARE IN MILLIMETERS. 3. THIS DRAWING IS A COPYRIGHT AND PROPERTY OF THE ARCHITECT, IS NOT TO BE PRODUCED, COPIED, HANDED OVER TO THIRD PARTY OR USED FOR ANY OTHER PURPOSE OTHER THAN FOR WHICH IT IS INTENDED. 4. THIS DRAWING IS TO BE READ AND NOT TO BE SCALED. 5. ALL DIMENSIONS SHALL BE VERIFIED ON SITE PRIOR TO START OF WORK ANY DISCREPANCY SHALL BE BROUGHT TO THE NOTICE OF THE ARCHITECT. 6. THE CONTRACTOR / PROJECT MANAGER MUST CHECK ALL DIMENSIONS AND DETAILS AND BE RESPONSIBLE FOR THE SAME. ANY DISCREPANCY SHALL BE NOTICE OF THE ARCHITECT. 7. THIS DRAWING SHALL BE READ IN CONJUNCTION WITH ALL RELEVANT ARCHITECTURAL, STRUCTURAL AND SERVICES DRAWINGS. ANY DISCREPANCY NOTICED SHALL BE BROUGHT
PROJECT: SITE: PRINCIPAL DESIGN CONSULTANT studiolotus CLIENT: F-301, FIRST FLOOR, LADO- SARAI CH. PREM SINGH HOUSE, NEW DELHI - 110030 MOBILE (DIRECT): +91-9437184477 LANDSCAPE CONSULTANT DATE : STRUCTURAL CONSULTANT SERVICES CONSULTANTS 103, DEFENCE COLONY CHHIBBER'S NEW DELHI N Gurgaon: L 2/2 , DLF PHASE II,GURGAON HARYANA-122002 P| 0124-4106949,4371361 M| 9811666949,9810155283 E| mail@parora.co.in Jitender Kumar M 8800466576 HOUSE NO-22, HARPHOOL VIHAR, BAPROLA, NANGLOI, NEW DELHI, DELHI, 110041 FOURTH FLOOR SPIRAL STAIRCASE DRAWING 1:100 @ A3 2 A404 A404 STAIRCASE PLAN 1:30 4 A404 A404 STEP DETAILS 1:10 6 A404 A404 PLAN DETAILS 1:20 5 A404 A404 STEP SECTION 1:20 3 A404 A404 BASE PLATE DETAILS 1:10 7 A404 A404 HANDRAIL DETAILS 1:20 1 A404 A404 KEYPLAN 1:500 STEP DIMENSIONS: WIDTH 800MM RISER : 200MM TURNING ANGLE 28.0 DEGREE 20MM OVERLAPPING 16MM DIA CIRCULAR HOLLOW SECTION BALUSTERS 120 MM DIA MS ROUND HOLLOW SECTION 16 MM BAR
OF WORKS.
8. ALL THE SERVICES DUCTS / CUT-OUTS ARE TO BE COVERED AFTER SERVICES PROVISIONS.
9. DRAWING APPROVAL IS FOR THE CONFORMITY WITH OUTLINE DESIGN INTENT AND DOES NOT RELIEVE THE CONTRACTOR/ SUBCONTRACTOR FROM FULL RESPONSIBILITY FOR THE ACCURACY, INTEGRATION AND FITNESS FOR PURPOSE OF DESIGN.
10. CONSTRUCTION MANAGER/PROJECT MANAGER TO REVERT BACK WITHIN 7 WORKING DAYS OF RECEIVING THE DRAWINGS ON COORDINATION AND BUILDABILITY ISSUES. IF OTHERWISE IT WOULD BE DEEMED THAT THEY HAVE UNDERSTOOD AND ACCEPTED THE DRAWING/DESIGN AND OWN FULL RESPONSIBILITY FOR THE WORKS CARRIED OUT ACCORDINGLY.
PROJECT:
PRINCIPAL DESIGN CONSULTANT studiolotus
F-301, FIRST FLOOR, LADO- SARAI CH. PREM
16 DN 855 [2'-10"] 3295[10'-10"] 2565 [8'-5"] 2705 [8'-10"] 2350 [7'-9"] 3660 [12'] 2065 [6'-9"] 4285 [14'-1"] 2705 [8'-10"] 2350 [7'-9"] 5055 [16'-7"] 1610 [5'-3"] + 15295 FFL 1615 [5'-4"] + 15295 FFL 130MM CIRCULAR STAIRCASE POLE COLUMN BASE PLATE 230X230MM 75X75 MS BOX SECTION COLUMN 230 MM THICH PARAPET WALL - MATCH WITH EXISTING PARAPET 975 [3'-2"] 970 [3'-2"] 230 [9"] 775 [2'-7"] 25 [1"] 155 [6"] 75 [3"] 165 [6"] 20 [1"] 230 [9"] 75 [3"] SECTION D-D 230[9"] 130MM DIA METAL COLUMN 100MM DIA PIN 200X200X12MM MS PLATE SECTION E-E 200X200X12MM MS PLATE 130MM DIA METAL COLUMN 90 [4"] P. Arora & Associates PVT. LTD. BALAJI AIRCON ENGINEERS Detail Date NOTE: 1. ALL DIMENSIONS ARE IN MILLIMETERS UNLESS SPECIFIED. 2. ALL LEVELS ARE IN MILLIMETERS. 3. THIS DRAWING IS A COPYRIGHT AND PROPERTY OF THE ARCHITECT, IS NOT TO BE PRODUCED, COPIED, HANDED OVER TO THIRD PARTY OR USED FOR ANY OTHER PURPOSE OTHER THAN FOR WHICH IT IS INTENDED. 4. THIS DRAWING IS TO BE READ AND NOT TO BE SCALED. 5. ALL DIMENSIONS SHALL BE VERIFIED ON SITE PRIOR TO START OF WORK ANY DISCREPANCY SHALL BE BROUGHT TO THE NOTICE OF THE ARCHITECT. 6. THE CONTRACTOR / PROJECT MANAGER MUST CHECK ALL DIMENSIONS AND DETAILS AND BE RESPONSIBLE FOR THE SAME. ANY DISCREPANCY SHALL BE NOTICE OF THE ARCHITECT. 7. THIS DRAWING SHALL BE READ IN CONJUNCTION WITH ALL RELEVANT ARCHITECTURAL, STRUCTURAL AND SERVICES DRAWINGS. ANY DISCREPANCY NOTICED SHALL BE BROUGHT TO THE ATTENTION OF THE CONSULTANTS AND RESOLVED AS SOON AS POSSIBLE, BUT ALWAYS PRIOR TO PROCUREMENT / EXECUTION
DWG
DRAWING
REV
SCALE:
NO
TITLE: DRAWN BY FATIMA CHECKED BY AP
NO :
SINGH
NEW DELHI -
MOBILE
STRUCTURAL
SERVICES
103, DEFENCE COLONY CHHIBBER'S NEW DELHI
L 2/2 DLF
HARYANA-122002 P|
M|
E| mail@parora.co.in R0 1:100 @ A3 Skylight setout Plan A-105 17-03-2022 1 SKYLIGHT SETOUT PLAN 1:50 1 PEDESTAL TYPE B SECTION 1:20 1 PEDESTAL TYPE A SECTION 1:20 1 KEYPLAN 1:500 1 COLUMN BASE PLATE 1:10 1 STAIRCASE PEDESTAL BASE PLATE 1:10
HOUSE,
110030
(DIRECT): +91-9437184477 LANDSCAPE CONSULTANT
CONSULTANT
CONSULTANTS
Gurgaon:
PHASE II,GURGAON
0124-4106949,4371361
9811666949,9810155283
IS FOR THE CONFORMITY WITH OUTLINE DESIGN INTENT AND DOES NOT RELIEVE THE CONTRACTOR/ SUBCONTRACTOR FROM FULL RESPONSIBILITY FOR THE ACCURACY, INTEGRATION AND FITNESS FOR PURPOSE OF DESIGN.
10. CONSTRUCTION MANAGER/PROJECT MANAGER TO REVERT BACK WITHIN 7 WORKING DAYS OF RECEIVING THE DRAWINGS ON COORDINATION AND BUILDABILITY ISSUES. IF OTHERWISE IT WOULD BE DEEMED THAT THEY HAVE UNDERSTOOD AND ACCEPTED THE DRAWING/DESIGN AND OWN FULL RESPONSIBILITY FOR THE WORKS CARRIED OUT ACCORDINGLY.
PROJECT:
103, DEFENCE COLONY
CHHIBBER'S NEW DELHI
LANDSCAPE CONSULTANT
SERVICES CONSULTANTS
STRUCTURAL CONSULTANT
Gurgaon: L 2/2 , DLF PHASE II,GURGAON HARYANA-122002 P| 0124-4106949,4371361 M| 9811666949,9810155283 E| mail@parora.co.in
PRINCIPAL DESIGN CONSULTANT studiolotus
F-301, FIRST FLOOR, LADO- SARAI CH. PREM SINGH HOUSE, NEW DELHI 110030 MOBILE (DIRECT): +91-9437184477
DRAWING TITLE:
Skylight Plan
DRAWN BY : FATIMA CHECKED BY : AP REV NO
SCALE: DWG NO
1175 [3'-10"] 1175 [3'-10"] 5090 [16'-8"] 2140 [7'] 2140 [7'] 1830 [6'] 1830 [6'] 8055 [26'-5"] + 15295 FFL 1350 [4'-5"] 860 [2'-10"] 855 [2'-10"] 1350 [4'-5"] 1200 [3'-11"] 930 [3'-1"] 1160 [3'-10"] 970 [3'-2"] 625 [2'-1"] 1195 [3'-11"] 1195 [3'-11"] 625 [2'-1"] 145 [6"] 595 [1'-11"] 600 [2'] 600 [2'] 135 [5"] 600 [2'] 600 [2'] 565 [1'-10"] 5060 [16'-7"] + 15295 FFL 16 DN + 15295 FFL 4360 [14'-4"] 640 [2'-1"] 670 [2'-2"] 640 [2'-1"] 670 [2'-2"] 235 [9"] 235 [9"] 235 [9"] 235 [9"] 640 [2'-1"] 640 [2'-1"] 640 [2'-1"] 640 [2'-1"] 660 [2'-2"] 990 [3'-3"] 865 [2'-10"] 640 [2'-1"] 640 [2'-1"] 640 [2'-1"] 640 [2'-1"] 660 [2'-2"] 900 [2'-11"] 800 [2'-7"] 980 [3'-3"] 1165 [3'-10"] 1205 [3'-11"] 935 [3'-1"] 1140 [3'-9"] 50 [2"] 150 [6"] 1470 [4'-10"] + 15110 SSL + 15295 FFL + 17740 ROOF LEVEL 2250 [7'-5"] 900 [2'-11"] + 15110 SSL 1470 [4'-10"] 150 [6"] 50 [2"] 1350 [4'-5"] 1350 [4'-5"] 1175 [3'-10"] 1175 [3'-10"] 195 [8"] + 15295 FFL + 17740 ROOF LEVEL 800 [2'-8"] 900 [2'-11"] P. Arora & Associates PVT. LTD. BALAJI AIRCON ENGINEERS Detail Date NOTE: 1. ALL DIMENSIONS ARE IN MILLIMETERS UNLESS SPECIFIED. 2. ALL LEVELS ARE IN MILLIMETERS. 3. THIS DRAWING IS A COPYRIGHT AND PROPERTY OF THE ARCHITECT, IS NOT TO BE PRODUCED, COPIED, HANDED OVER TO THIRD PARTY OR USED FOR ANY OTHER PURPOSE OTHER THAN FOR WHICH IT IS INTENDED. 4. THIS DRAWING IS TO BE READ AND NOT TO BE SCALED. 5. ALL DIMENSIONS SHALL BE VERIFIED ON SITE PRIOR TO START OF WORK ANY DISCREPANCY SHALL BE BROUGHT TO THE NOTICE OF THE ARCHITECT. 6. THE CONTRACTOR / PROJECT MANAGER MUST CHECK ALL DIMENSIONS AND DETAILS AND BE RESPONSIBLE FOR THE SAME. ANY DISCREPANCY SHALL BE NOTICE OF THE ARCHITECT. 7. THIS DRAWING SHALL BE READ IN CONJUNCTION WITH ALL RELEVANT ARCHITECTURAL, STRUCTURAL AND SERVICES DRAWINGS. ANY DISCREPANCY NOTICED SHALL BE BROUGHT TO THE ATTENTION OF THE CONSULTANTS AND RESOLVED AS SOON AS POSSIBLE, BUT ALWAYS PRIOR TO PROCUREMENT / EXECUTION OF WORKS. 8. ALL THE SERVICES DUCTS / CUT-OUTS ARE TO BE COVERED AFTER SERVICES PROVISIONS. 9. DRAWING APPROVAL
R0 1:100 @ A3
A-105 17-03-2022 1 SKYLIGHT ROOF PLAN 1:100 1 KEYPLAN 1:500 1 SKYLIGHT PLAN 1:100 1 SECTION YY' 1:100 1 SECTION XX' 1:100 X X' Y Y' 1 ROOFING DETAIL 1:10 2270 [7'-5"]
TO THE ATTENTION OF THE CONSULTANTS AND RESOLVED AS SOON AS POSSIBLE, BUT ALWAYS PRIOR TO PROCUREMENT EXECUTION OF WORKS.
8. ALL THE SERVICES DUCTS / CUT-OUTS ARE TO BE COVERED AFTER SERVICES PROVISIONS.
9. DRAWING APPROVAL IS FOR THE CONFORMITY WITH OUTLINE DESIGN INTENT AND DOES NOT RELIEVE THE CONTRACTOR/ SUBCONTRACTOR FROM FULL RESPONSIBILITY FOR THE ACCURACY, INTEGRATION AND FITNESS FOR PURPOSE OF DESIGN. 10. CONSTRUCTION MANAGER/PROJECT MANAGER TO REVERT BACK WITHIN 7 WORKING DAYS OF RECEIVING THE DRAWINGS ON COORDINATION AND BUILDABILITY ISSUES. IF OTHERWISE IT WOULD BE DEEMED THAT THEY HAVE UNDERSTOOD AND ACCEPTED THE DRAWING/DESIGN AND OWN FULL RESPONSIBILITY FOR THE WORKS CARRIED OUT ACCORDINGLY.
PRINCIPAL
DRAWING TITLE:
DRAWN BY : FATIMA CHECKED BY AP REV NO :
SCALE:
+ 15295 FFL 16 DN + 15295 FFL 4360 [14'-4"] 640 [2'-1"] 670 [2'-2"] 640 [2'-1"] 670 [2'-2"] 235 [9"] 235 [9"] 235 [9"] 235 [9"] 640 [2'-1"] 640 [2'-1"] 640 [2'-1"] 640 [2'-1"] 660 [2'-2"] 990 [3'-3"] 865 [2'-10"] 640 [2'-1"] 640 [2'-1"] 640 [2'-1"] 640 [2'-1"] 660 [2'-2"] 900 [2'-11"] + 15295 FFL + 17740 ROOF LEVEL 800 [2'-8"] 1470 [4'-10"] 200 [8"] 640 [2'-1"] 640 [2'-1"] 660 [2'-2"] 660 [2'-2"] + 15295 FFL + 17740 ROOF LEVEL 640 [2'-1"] 640 [2'-1"] 640 [2'-1"] 640 [2'-1"] 990 [3'-3"] 800 [2'-8"] 1470 [4'-10"] 200 [8"] 1295 [4'-3"] 90 [4"] 90 [4"] R45 [R2"] R45[R2"] 1410 [4'-8"] 205 [8"] 205 [8"] P. Arora & Associates PVT. LTD. BALAJI AIRCON ENGINEERS Detail Date NOTE: 1. ALL DIMENSIONS ARE IN MILLIMETERS UNLESS SPECIFIED. 2. ALL LEVELS ARE IN MILLIMETERS. 3. THIS DRAWING IS A COPYRIGHT AND PROPERTY OF THE ARCHITECT, IS NOT TO BE PRODUCED, COPIED, HANDED OVER TO THIRD PARTY OR USED FOR ANY OTHER PURPOSE OTHER THAN FOR WHICH IT IS INTENDED. 4. THIS DRAWING IS TO BE READ AND NOT TO BE SCALED. 5. ALL DIMENSIONS SHALL BE VERIFIED ON SITE PRIOR TO START OF WORK ANY DISCREPANCY SHALL BE BROUGHT TO THE NOTICE OF THE ARCHITECT. 6. THE CONTRACTOR PROJECT MANAGER MUST CHECK ALL DIMENSIONS AND DETAILS AND BE RESPONSIBLE FOR THE SAME. ANY DISCREPANCY SHALL BE NOTICE OF THE ARCHITECT. 7. THIS DRAWING SHALL BE READ IN CONJUNCTION WITH ALL RELEVANT ARCHITECTURAL, STRUCTURAL AND SERVICES DRAWINGS. ANY DISCREPANCY NOTICED SHALL BE BROUGHT
DESIGN CONSULTANT studiolotus F-301, FIRST FLOOR, LADO- SARAI CH. PREM SINGH HOUSE, NEW DELHI - 110030 MOBILE (DIRECT): +91-9437184477 LANDSCAPE CONSULTANT STRUCTURAL CONSULTANT SERVICES CONSULTANTS 103, DEFENCE COLONY Gurgaon: L 2/2 DLF PHASE II,GURGAON HARYANA-122002 P| 0124-4106949,4371361 M| 9811666949,9810155283 E| mail@parora.co.in R0 1:100 @ A3 Skylight Plan A-105 17-03-2022 1 SKYLIGHT PLAN 1:100 1 TYPICAL ELEVATION A 1:50 1 GRILL TYPICAL ELEVATION 1:15 1 TYPICAL ELEVATION B 1:20 1 KEYPLAN 1:500
NOTICED SHALL BE BROUGHT TO THE ATTENTION OF THE CONSULTANTS AND RESOLVED AS SOON AS POSSIBLE, BUT ALWAYS PRIOR TO PROCUREMENT / EXECUTION OF WORKS.
8. ALL THE SERVICES DUCTS CUT-OUTS ARE TO BE COVERED AFTER SERVICES PROVISIONS.
9. DRAWING APPROVAL IS FOR THE CONFORMITY WITH OUTLINE DESIGN INTENT AND DOES NOT RELIEVE THE CONTRACTOR/ SUBCONTRACTOR FROM FULL RESPONSIBILITY FOR THE ACCURACY, INTEGRATION AND FITNESS FOR PURPOSE OF DESIGN.
10. CONSTRUCTION MANAGER/PROJECT MANAGER TO REVERT BACK WITHIN 7 WORKING DAYS OF RECEIVING THE DRAWINGS ON COORDINATION AND BUILDABILITY ISSUES. IF OTHERWISE IT WOULD BE DEEMED THAT THEY HAVE UNDERSTOOD AND ACCEPTED THE DRAWING/DESIGN AND OWN FULL RESPONSIBILITY FOR THE WORKS CARRIED OUT ACCORDINGLY.
FRAME DETAILS 1:10
2
PROJECT:
103, DEFENCE COLONY
SITE:
CHHIBBER'S NEW DELHI
CLIENT:
A1304 X' 1 LIFT LOBBY PLAN 1:30
LANDSCAPE CONSULTANT
SERVICES CONSULTANTS
STRUCTURAL CONSULTANT
Gurgaon: L 2/2 DLF PHASE II,GURGAON HARYANA-122002 P| 0124-4106949,4371361 M| 9811666949,9810155283
FOR REFERENCE X
PRINCIPAL DESIGN CONSULTANT studiolotus
F-301, FIRST FLOOR, LADO- SARAI CH. PREM SINGH HOUSE, NEW DELHI - 110030 MOBILE (DIRECT): +91-9437184477
E| mail@parora.co.in R0
DRAWING TITLE:
3 LOBBY ELEVATION 1:30 4 DOOR SECTION XX' 1:30 20-04-2022
CHECKED BY : AP REV NO
SCALE:
DWG NO :
DATE
2160 [7'-1"] 1015 [3'-4"] 2500 [8'-2"] 235 [9"] 75 [3"] 880 [2'-11"] EQ EQ 2035 [6'-8"] 2245 [7'-4"] EQ 880 [2'-11"] 75 [3"] 75 [3"] EQ 2035 [6'-8"] +-0.00 FFL +1000 C/L OF DOOR HANDLE +2500 LINTEL 150 [6"] 1175 [3'-10"] 60 [2"] 405 [1'-4"] 405 [1'-4"] 60 [2"] 75 [3"] +2800 CEILING 1010 [3'-4"] 840 [2'-9"] 680 [2'-3"] 1175 [3'-10"] 465 [1'-6"] 60 [2"] 60 [2"] 110 [4"] 110 [4"] 1200 [3'-11"] 530 [1'-9"] 255 [10"] 430 [1'-5"] 60 [2"] 530 [1'-9"] 200 [8"] 195 [8"] 70 [3"] 70 [3"] 1135 [3'-9"] 860 [2'-10"] 2155 [7'-1"] 160 [6"] 60 [2"] 255 [10"] 10 [0"] 40 [2"] 60 [2"] 255 [10"] 50 [2"] 10 [0"] 10 [0"] 40 [2"] P. Arora & Associates PVT. LTD. BALAJI AIRCON ENGINEERS Detail Rev. Date NOTE: 1. ALL DIMENSIONS ARE IN MILLIMETERS UNLESS SPECIFIED. 2. ALL LEVELS ARE IN MILLIMETERS. 3. THIS DRAWING IS A COPYRIGHT AND PROPERTY OF THE ARCHITECT, IS NOT TO BE PRODUCED, COPIED, HANDED OVER TO THIRD PARTY OR USED FOR ANY OTHER PURPOSE OTHER THAN FOR WHICH IT IS INTENDED. 4. THIS DRAWING IS TO BE READ AND NOT TO BE SCALED. 5. ALL DIMENSIONS SHALL BE VERIFIED ON SITE PRIOR TO START OF WORK ANY DISCREPANCY SHALL BE BROUGHT TO THE NOTICE OF THE ARCHITECT. 6. THE CONTRACTOR / PROJECT MANAGER MUST CHECK ALL DIMENSIONS AND DETAILS AND BE RESPONSIBLE FOR THE SAME. ANY DISCREPANCY SHALL BE NOTICE OF THE ARCHITECT. 7. THIS DRAWING SHALL BE READ IN CONJUNCTION WITH ALL RELEVANT ARCHITECTURAL, STRUCTURAL AND SERVICES DRAWINGS. ANY DISCREPANCY
LIFT LOBBY DETAILS 1:30
Section AA'
WORKS.
8. ALL THE SERVICES DUCTS CUT-OUTS ARE TO BE COVERED AFTER SERVICES PROVISIONS.
9. DRAWING APPROVAL IS FOR THE CONFORMITY WITH OUTLINE DESIGN INTENT AND DOES NOT RELIEVE THE CONTRACTOR/ SUBCONTRACTOR FROM FULL RESPONSIBILITY FOR THE ACCURACY, INTEGRATION AND FITNESS FOR PURPOSE OF DESIGN.
10. CONSTRUCTION MANAGER/PROJECT MANAGER TO REVERT BACK WITHIN 7 WORKING DAYS OF RECEIVING THE DRAWINGS ON
580 [1'-11"] 2575 [8'-5"] 2875 [9'-5"] 350 [1'-2"] 220 [9"] 1940 [6'-4"]
120 [5"] 4TH FLOOR SLAB LEVEL TERRACE FLOOR SLAB LEVEL 1050 [3'-5"] 1150 [3'-9"] sadharhalli stone on all sides Udaypur green marble as counter stone 1361 [4'-6"] 1940 [6'-4"] 330 [1'-1"] 250 [10"] 980 [3'-3"] 1410 [4'-8"] Udaypur green marble as counter stones Udaypur green marble as dipping pool flooring Ø400 [Ø1'-4"] A' 185 [7"] 400 [1'-4"] B B' A 340 [1'-1"] 345 [1'-2"] 600 [2'] 2575 [8'-5"] 2875 [9'-5"] 185 [7"] 340 [1'-1"] 1455 [4'-9"] 120 [5"] 4TH FLOOR SLAB LEVEL TERRACE FLOOR SLAB LEVEL 1030 [3'-5"] Section BB' sadharhalli stone Udaypur green marble P. Arora & Associates PVT. LTD. BALAJI AIRCON ENGINEERS Detail Date NOTE: 1. ALL DIMENSIONS ARE IN MILLIMETERS UNLESS SPECIFIED. 2. ALL LEVELS ARE IN MILLIMETERS. 3. THIS DRAWING IS A COPYRIGHT AND PROPERTY OF THE ARCHITECT, IS NOT TO BE PRODUCED, COPIED, HANDED OVER TO THIRD PARTY OR USED FOR ANY OTHER PURPOSE OTHER THAN FOR WHICH IT IS INTENDED. 4. THIS DRAWING IS TO BE READ AND NOT TO BE SCALED. 5. ALL DIMENSIONS SHALL BE VERIFIED ON SITE PRIOR TO START OF WORK ANY DISCREPANCY SHALL BE BROUGHT TO THE NOTICE OF THE ARCHITECT. 6. THE CONTRACTOR / PROJECT MANAGER MUST CHECK ALL DIMENSIONS AND DETAILS AND BE RESPONSIBLE FOR THE SAME. ANY DISCREPANCY SHALL BE NOTICE OF THE ARCHITECT. 7. THIS DRAWING SHALL BE READ IN CONJUNCTION WITH ALL RELEVANT ARCHITECTURAL, STRUCTURAL AND SERVICES DRAWINGS. ANY DISCREPANCY NOTICED SHALL BE BROUGHT TO THE ATTENTION OF THE CONSULTANTS AND RESOLVED AS SOON AS POSSIBLE, BUT ALWAYS PRIOR TO PROCUREMENT / EXECUTION OF
COORDINATION
BUILDABILITY ISSUES.
OTHERWISE
WOULD
DEEMED
HAVE UNDERSTOOD
ACCEPTED
DRAWING/DESIGN
RESPONSIBILITY
THE WORKS CARRIED OUT ACCORDINGLY. SCALE: DWG NO : DRAWING TITLE: DRAWN BY : FATIMA CHECKED BY : AP REV NO PROJECT: PRINCIPAL DESIGN CONSULTANT studiolotus F-301, FIRST FLOOR, LADO- SARAI CH. PREM SINGH HOUSE, NEW DELHI - 110030 MOBILE (DIRECT): +91-9437184477 LANDSCAPE CONSULTANT STRUCTURAL CONSULTANT SERVICES CONSULTANTS 103, DEFENCE COLONY CHHIBBER'S NEW DELHI Gurgaon: L 2/2 DLF PHASE II,GURGAON HARYANA-122002 P| 0124-4106949,4371361 M| 9811666949,9810155283 E| mail@parora.co.in R0 1:100 @ A3 Skylight Plan A-105 22-06-2022 1 DIPPING POOL PLAN 1:40 2 SECTION BB' 1:40 3 SECTION AA' 1:40 1 KEYPLAN 1:500
AND
IF
IT
BE
THAT THEY
AND
THE
AND OWN FULL
FOR
DRAWING APPROVAL IS FOR THE CONFORMITY WITH OUTLINE DESIGN INTENT AND DOES NOT RELIEVE THE CONTRACTOR/ SUBCONTRACTOR FROM FULL RESPONSIBILITY FOR THE ACCURACY, INTEGRATION AND FITNESS FOR PURPOSE OF DESIGN.
10. CONSTRUCTION MANAGER/PROJECT MANAGER TO REVERT BACK WITHIN 7 WORKING DAYS OF RECEIVING THE DRAWINGS ON COORDINATION AND BUILDABILITY ISSUES. IF OTHERWISE IT WOULD BE DEEMED THAT THEY HAVE UNDERSTOOD AND ACCEPTED THE DRAWING/DESIGN AND OWN FULL RESPONSIBILITY FOR THE WORKS CARRIED OUT ACCORDINGLY.
PROJECT:
SITE:
CLIENT:
103, DEFENCE COLONY CHHIBBER'S NEW DELHI
LANDSCAPE CONSULTANT
SERVICES CONSULTANTS
PRINCIPAL DESIGN CONSULTANT studiolotus
F-301, FIRST FLOOR, LADO- SARAI CH. PREM SINGH HOUSE, NEW DELHI - 110030 MOBILE (DIRECT): +91-9437184477
AP
A-1403 09-04-2022
NO
UP DN T1 T1 T1 T2 T1 T3 T3 T4 T5 T2 T4 T4 T4 T6 Third Floor Flooring and Finishing Intent 07-12-2021 R0 INTERIOR INTENT ALIGN DOORS ALIGN WALL WITH WALL SP SP FN PT LUXURY EMULSION PAINT WITH POP PUNNING 16. FN WT2 17. FN EPL ROUGH STUCCO PLASTER FINISH 18. FN DT 1. COMMERCIAL WALL TILES FFL TO 900MM 2. DADO TILES OF APPROVED SAMPLE FROM HT 900MM TO 1350 FROM FFL. 3. PLASTER FINISH FROM HT 1350 TO CEILING 19. FN PT2 WALL PAINT WITH POP PUNNING 20. 26. 23. 24. FN T1 4X2 FT TILE AS PER APPROVED SAMPLE 25. 29. 28. 27. 22. 21. FN WT3 COMMERCIAL BATHROOM TILES OF APPROVED SAMPLE FROM FFL TO CEILING FN T2 1. BATHROOM TILE OF APPROVED SAMPLE FROM FFL TO 1200MM 2. WALL TILES OF APPROVED SAMPLE FROM 1200MM TO CEILING. WALL TILE OF APPROVED SAMPLE LAID IN INTENDED PATTERN. FN WT1 FN WTP S.no Tags Description PU PAINT ON FRAME, ARCHITRAVE, INSIDE OF TOILET DOOR AS/ APP SELECTION FN TM1 LUNAWOOD THERMO-PINE JAMB AS/APPROVED MOCK UP SAMPLE FN PUP 30. BATHROOM WALL TILES OF APPROVED SAMPLE FROM FFL TO CEILING FN T3 8X4 FT MARBLE SLABS SP SP SP SP SP 600 1 100 SP SP SP SP SP SP SP 2X2 FT TILE AS PER APPROVED SAMPLE FN T4 1X1 FT TILE/STONE CHECKERED PATTERN AT 45 DEGREE ANGLE WITH 170 MM BATH RUNNING AROUND FN T5 GREY MARBLE SLABS WITH DOUBLE BANDS OF JAISALMER STONE ON ALL SIDES(refer detail A DETAIL A OF FN T5 200 [8"] 60 [2"] 60 [2"] 30 [1"] 200 [8"] 750 [2'-6"] 240 [9"] 250[10"] 1731 [5'-8"] SP GREY MARBLE 120 MM BAND GREY MARBLE 30 MM BAND JAISALMER STONE 30 MM BAND JAISALMER STONE 1:100 @ A3 P. Arora & Associates PVT. LTD. BALAJI AIRCON ENGINEERS Detail Rev. Date NOTE: 1. ALL DIMENSIONS ARE IN MILLIMETERS UNLESS SPECIFIED. 2. ALL LEVELS ARE IN MILLIMETERS. 3. THIS DRAWING IS A COPYRIGHT AND PROPERTY OF THE ARCHITECT, IS NOT TO BE PRODUCED, COPIED, HANDED OVER TO THIRD PARTY OR USED FOR ANY OTHER PURPOSE OTHER THAN FOR WHICH IT IS INTENDED. 4. THIS DRAWING IS TO BE READ AND NOT TO BE SCALED. 5. ALL DIMENSIONS SHALL BE VERIFIED ON SITE PRIOR TO START OF WORK ANY DISCREPANCY SHALL BE BROUGHT TO THE NOTICE OF THE ARCHITECT. 6. THE CONTRACTOR / PROJECT MANAGER MUST CHECK ALL DIMENSIONS AND DETAILS AND BE RESPONSIBLE FOR THE SAME. ANY DISCREPANCY SHALL BE NOTICE OF THE ARCHITECT. 7. THIS DRAWING SHALL BE READ IN CONJUNCTION
8.
9.
WITH ALL RELEVANT ARCHITECTURAL, STRUCTURAL AND SERVICES DRAWINGS. ANY DISCREPANCY NOTICED SHALL BE BROUGHT TO THE ATTENTION OF THE CONSULTANTS AND RESOLVED AS SOON AS POSSIBLE, BUT ALWAYS PRIOR TO PROCUREMENT / EXECUTION OF WORKS.
ALL THE SERVICES DUCTS / CUT-OUTS ARE TO BE COVERED AFTER SERVICES PROVISIONS.
DWG
REV
SCALE:
NO : DRAWING TITLE: CHECKED BY :
DATE
STRUCTURAL CONSULTANT R1
SP 165 [6"] 31. FN T6 600x600MM SADHARHALLI STONE AT 45 DEGREE ANGLE WITH 70X70MM JAISALMER STONE, 160 MM BAND AROUND
Gurgaon: L 2/2 DLF PHASE II,GURGAON HARYANA-122002 P| 0124-4106949,4371361 M| 9811666949,9810155283 E| mail@parora.co.in
AND RESOLVED AS SOON AS POSSIBLE, BUT ALWAYS PRIOR TO PROCUREMENT EXECUTION OF WORKS.
8. ALL THE SERVICES DUCTS CUT-OUTS ARE TO BE COVERED AFTER SERVICES PROVISIONS.
9. DRAWING APPROVAL IS FOR THE CONFORMITY WITH OUTLINE DESIGN INTENT AND DOES NOT RELIEVE THE CONTRACTOR/ SUBCONTRACTOR FROM FULL RESPONSIBILITY FOR THE ACCURACY, INTEGRATION AND FITNESS FOR PURPOSE OF DESIGN.
10. CONSTRUCTION MANAGER/PROJECT MANAGER TO REVERT BACK WITHIN 7 WORKING DAYS OF RECEIVING THE DRAWINGS ON COORDINATION AND BUILDABILITY ISSUES. IF OTHERWISE IT WOULD BE DEEMED THAT THEY HAVE UNDERSTOOD AND ACCEPTED THE DRAWING/DESIGN AND OWN FULL RESPONSIBILITY FOR THE WORKS CARRIED OUT ACCORDINGLY.
PROJECT:
103, DEFENCE COLONY CHHIBBER'S NEW DELHI
LANDSCAPE CONSULTANT
SERVICES CONSULTANTS
STRUCTURAL CONSULTANT
Gurgaon: L 2/2 DLF PHASE II,GURGAON HARYANA-122002 P| 0124-4106949,4371361 M| 9811666949,9810155283 E| mail@parora.co.in
PRINCIPAL DESIGN CONSULTANT studiolotus
F-301, FIRST FLOOR, LADO- SARAI CH. PREM SINGH HOUSE, NEW DELHI - 110030 MOBILE (DIRECT): +91-9437184477
DRAWING TITLE:
Stilt area flooring
CHECKED BY AP
DWG NO :
REV NO :
SCALE:
SUNKEN COURT BELOW SUNKEN COURT BELOW SUNKEN COURT BELOW SERVICE SHAFT RESIDENT'S ELEVATOR SUNKEN COURT BELOW SERVICE ELEVATOR UP DN INV. D.B Partition wall 6340 [20'-10"] 8875 [29'-2"] 16455 [54'-2"] 805270 [2642'-1"] 4850 [15'-10"] 1875 [6'-3"] 3900 [12'-11"] 3150 [10'-5"] 1800 [5'-10"] 193515 [635'] 600 [2'-1"] 4875 [15'-10"] 5120 [16'-8"] 256445 [841'-3"] 3795 [12'-6"] 6595 [21'-8"] SP SP SP SP SP SP P. Arora & Associates PVT. LTD. BALAJI AIRCON ENGINEERS Detail Date NOTE: 1. ALL DIMENSIONS ARE IN MILLIMETERS UNLESS SPECIFIED. 2. ALL LEVELS ARE IN MILLIMETERS. 3. THIS DRAWING IS A COPYRIGHT AND PROPERTY OF THE ARCHITECT, IS NOT TO BE PRODUCED, COPIED, HANDED OVER TO THIRD PARTY OR USED FOR ANY OTHER PURPOSE OTHER THAN FOR WHICH IT IS INTENDED. 4. THIS DRAWING IS TO BE READ AND NOT TO BE SCALED. 5. ALL DIMENSIONS SHALL BE VERIFIED ON SITE PRIOR TO START OF WORK ANY DISCREPANCY SHALL BE BROUGHT TO THE NOTICE OF THE ARCHITECT. 6. THE CONTRACTOR PROJECT MANAGER MUST CHECK ALL DIMENSIONS AND DETAILS AND BE RESPONSIBLE FOR THE SAME. ANY DISCREPANCY SHALL BE NOTICE OF THE ARCHITECT. 7. THIS DRAWING SHALL BE READ IN CONJUNCTION WITH ALL RELEVANT ARCHITECTURAL, STRUCTURAL AND SERVICES DRAWINGS. ANY DISCREPANCY NOTICED SHALL BE BROUGHT TO THE ATTENTION OF THE CONSULTANTS
R0 1:100 @ A3 A-105 22-03-2022
DRAWING NO : DRAWING TITLE: CHECKED BY LANDSCAPE CONSULTANT: MEP CONSULTANT: STRUCTURAL CONSULTANT: PROJECT: SITE: CLIENT: SCHEMATIC DESIGN PURPOSE REV. DATE DATE CONSULTANT 4 CONSULTANT 4
PROJECT:
SITE:
STRUCTURAL CONSULTANT:
MEP CONSULTANT:
LANDSCAPE CONSULTANT:
CLIENT: CONCEPT
DRAWING TITLE:
CHECKED BY :
DRAWING NO :
DEVELOPMENT
DATE
PURPOSE REV.
DEVELOPMENT PURPOSE
DATE
DRAWING NO : DRAWING TITLE: CHECKED BY : LANDSCAPE CONSULTANT: MEP CONSULTANT: STRUCTURAL CONSULTANT: PROJECT: SITE: CLIENT: CONCEPT
REV.
