A Guide To Calibrate Leica Survey Equipment Accessories

A Guide To Calibrate Leica Survey Equipment Accessories

Leica Survey equipment accessories and calibration are helpful in improving the proficiency of the instruments being used. The right Leica equipment and accessories calibrated from an approved laboratory at a specific time can give you a good quality measurement.

It will also ensure that your equipment is focused on industry mistakes and that efficient results are obtained each time other organizations will trust and quote.

Hereʼs an easy guide to calibrating Leica Survey Equipment Accessories.

When to calibrate your Leica Survey Equipment?

It would help if you kept examining your equipment to determine an ideal time for calibration. The timing of equipment calibration or testing depends on a variety of factors.

These include: ❏ ❏ ❏ ❏ ❏ ❏ ❏ ❏

Purchase date Last date of calibration Equipment condition Errors being obtained Damaged equipment Equipment malfunctioning Change in reflectors Equipment repair

Calibration will ensure that accurate reading is obtained each time.

Selecting the correct calibration method and eliminating levelling errors

The next step is to select the correct calibration method. This will be based on the type of equipment and the kind of error or deflection it shows. This can be done via the field procedure bubble method, Two peg method, and known baseline method.

1. Field Procedure

Because of instrument misadjustment, the standard and safest way to minimize levelling errors is to pursue the tradition of holding back sights as close to equal as possible to the time checked.

This setup and the complete back sights and foreheads should be followed.

2. Bubble Method The circular bubble adjustment is a two-step operation. The bubble in the circle is first adjusted and turned to 180 ° to level it. Next, the bubble adjustment screws are moved, and the bubble is repurchased halfway to the middle of the circle. These steps are repeated until the bubble starts remaining static in the circle.

3. Two Peg Test

The two peg tests were done extensively for Leica survey equipment. This is based on the assumption that, in theory, the line of sight through the level is lying on the plane. It measures the gaps between the instrument and the rod. These are equal, and the errors are cancelled. It thus works by providing the real difference between A and B in height.

Leica Survey equipment accessories and calibration are helpful in improving the proficiency of the instruments being used. The right Leica equipment and accessories calibrated from an approved laboratory at a specific time can give you a good quality measurement. For the best quality, Leica survey equipment accessories, contact Falcon Geomatics today. Their highly affordable prices and good quality makes them a perfect choice.

Contact Details

Ahammed Kamal Warehouse 6 Street 10C, Ras al Khor Industrial 1, PO.Box.238544, Dubai, United Arab Emirates +971 4 327 9333 sales@falcon-geosystems.com

THANK YOU