PET RIGID FILM TECHNOLOGY

PET RIGID FILM TECHNOLOGY APET - CPET - FOAM PET - PP - PS and PLA INNOVATIVE SHEET EXTRUSION LINES

Bandera innovation: a synonym for excellence Since 2000s, Bandera has developed and improved a cutting edge extrusion system for the production of PET sheet and foil from both virgin material and recycled PET. Up to the present, this unique Bandera co-rotating twin-screw technology has been applied to more than 60 extrusion lines for the production of high quality PET sheet and foil.

The system has been patented by Bandera (Patent EP 1226 922 B1).

Bandera extrusion line achievable throughput exceeds 2 tons per hour.

Raw material standard composition - for the twin-screw “core� layer - is 100% recycled PET flakes from post-consumer PET bottles and/or PET skeleton waste from thermoforming and/or PET reground bottle preforms. Bandera customers usually include some virgin PET material as external capping layers (functional barrier; up to 7.5% each layer) to obtain the classic A-B-A structure.

Experienced & Innovative

Serious and well-organized

R&D constant investment

Family owned but ruled on managerial base

Reliable

Flexibility on engineering

Sturdy and robust concept of all the equipment

Availability of complete customized turn key

Competitive and cost-effective

Deep knowledge of extrusion process

Consolidated standard production procedures

In-house design and production since 65 years

Close to the customer need Service oriented

Performing at highest level Best outputs and tolerances PET foil line 1200 Kg/h

2

Guaranteed plants performances Worldwide reputation for trustworthiness, integrity and high standards of business context

Selling well-tested and mature technologies

Already projected to the future Safe supplier for long term cooperation

Twin screw technology, the ground-breaking concept On the basis of single screw results, Bandera R&D Dept. focussed on the co-rotating highly vented twin-screw extrusion (HVTSE) technology - a thoroughly different concept applicable to the widest range of applications, e.g. compounding, pelletizing, filaments, recycling, etc.

Ranging among the world leading twin-screw extruder producers, Bandera has manufactured a dedicated PET processing machine ready for testing within a few weeks...

From the very beginning, results proved to be definitely encouraging for both Bandera and its customers. By the end of 1999, the first PET sheet extrusion line was successfully installed in southern Italy (it featured a double twin screw configuration). Bandera technology was promptly patented.

Since then Bandera has kept on developing its technology. Outstanding results in terms of process flexibility, melt purification and cost-effective

HVTSE extruder

aspects have been obtained. Bandera customers are constantly supplying packaging products to world leading food industries.

Polishing and cooling calender for PET rigid film (120Âľ-1,6 mm) One of the first Bandera pet foil extrusion lines with HVTSE technology - year 1999

Bandera pet foil extrusion lines

3

Twin screw technology main advantages: postconsume recycled raw materials Possibility

to

process

100%

PET

flakes

and/or

reground

(thermoforming skeleton) material with initial humidity up to 1.5% (residual moisture) with no need for dehumidifying process.

Raw material pre-treatments are very complex and timeconsuming (hours).

User-friendly feeding and dosing equipment Dosing systems designed by Bandera outstand for reliability, user friendliness, and maintenance-free construction, resulting in easier management and configuration of raw material feeding and dosing ancillary equipment.

Co-rotating screws featuring a special profile to ensure PET polymer gentle processing, with no thermal and hydrolytic degradation, thus resulting in excellent melt thermal control.

From PET bottle flakes to PET package with Bandera PET foil extrusion line

4

Screws profile/geometry for highly vented co-rotating twin screw extruder

Twin screw technology main advantages: the energy saving concept Power saving: power consumption ~ 35% lower than single screw extruder + dehumidifier

Mission: safety, energy saving, recycling

Bandera has recently measured the energy consumption of one of its PET lines: ~ 0.35 kWh/kg (complete 2.3 ton production line including chiller).

PET polymers are gently processed by the co-rotating twin screw extruder.

Bandera is focused, besides others, on two core aspects: Extrusion line safety operation condition Best energetic efficiency and maximum

Extruder machine length (42:1 L/D or 52:1 L/D) allows for resin smooth processing, with no material stress. The extruder motor is never

sensibility to usage of recycled plastics In order to provide its Customers with:

overstressed.

Power consumption values are shown in the column chart below for different technology comparison.

W-h / Kg PET Safe and reliable production lines delivering top manufacture and quality performances

Minimum power consumption production lines

Single-screw extrusion + crystallization & dehumidification (no degassing)

Single-screw extrusion + degassing & fast drying

Single-screw extrusion + degassing unit

Legenda: Loading unit energy Dehumidification energy Degassing unit energy Engine energy

Twin-screw co-rotating extrusion (no dehumidification)

Fast drying energy Crystallization energy Extruder heating + cooling energy

(amorphous material, post-consumer or from industrial waste)

Dedicated extrusion lines for the production of finished products made from innovative thermoplastics, thus favoring recycled and biodegradable material transforming

Power Consumption Differences Single-screw extruder (no venting) + crystallizer & dehumidifier Twin-screw extruder (no dehumidifier): 258.5 Wh/kg Single-screw extruder + venting & fast dryer - Twin-screw extruder (no dehumidifier): 162 Wh/kg Single-screw extruder + venting - Twin-screw extruder (no dehumidifier): 155 Wh/kg

3 5

Twin screw technology main advantages: best flexibility Superior flexibility in extruding several thermoplastic materials (PLA - PS - PP) intended for packaging. No screw replacement required, with excellent output levels if compared with single screw extrusion technology and twin screw extruders by other manufacturers.

Recipe & colour changeover with no line stoppage. Material recipes, formulations and colour changeover are largely eased by Bandera extrusion process (no line shutdown is required). Minimized material residence time and self-cleaning properties of the co-rotating twin screw extruder typically allow for operation cycle completion in 5รท10 minutes, thus resulting in significant savings in line running time, material consumption and waste.

Extrusion screws consist of mixing and conveying modules assembled on broached shafts. The barrel construction is modular, too, and 2c 135 for 1,6 tons of PET foil

involves nitrided steel sections.

Reduced encumbrance leads to logistic and infra-structure cost reduction.

Higher line output if compared with standard-type extruders (up to 2500 kg/h with 2C135 mm 52D extruder). Minimum output: 400 kg/h.

Highly experienced engineers and skilled technicians form Bandera technical and engineering dept. allow Bandera to offer its customers tailor-made extrusion lines.

New Alpha Series reaching production output in coextrusion up to 3000 kg/h

Screw and barrel - co-rotating twin screw extruder

6

Dosing system for both virgin and reground raw materials

Twin screw technology main advantages: best melt purification Enhanced venting sections and empowered vacuum pumps for maintenance-free and high purification results.

Reliable venting and degassing sections with empowered vacuum pumps - 10รท15mbar residual vacuum - with very low maintenance need and a very high melt purification effect (FDA approved contaminants evacuation trials executed on specific output - easy extraction of unwanted volatile materials, interstitial gas, residual moisture, oligomers, aldehydes and any carbonious materials).

Bandera has been a pacesetter, among machine suppliers, in starting such trials and tests several years ago. Bandera has achieved its FDA NOL in 2009.

The unique combination of screw profile, extruder length and vacuum system is the core of Bandera R&D efforts. The minimized IV drop does in no way interfere with sheet mechanical properties. Melt control at the die is much easier due to its stiffer characteristics, thus resulting in endproduct enhanced features.

Innovative and powered venting units

HIGH VACUUM DEGASSING

OPEN VENTING

2nd stage

RAW MATERIAL

1nd stage

FEEDing ZONE

L/D 52

7

Alpha PET extrusion line Food HP Series Innovative multi-layers PET complete extrusion line for rigid and thermoformed food packages, with very high production output Largest production output Availability of wet foil width up to 2 mts Highest level of energy consumption savings Fully automatic production island

TECHNICAL DATA Line Type

3-layer CoEx-Sheet-Line plus lamination

Dosing Unit

4 components gravimetric dosing unit on TwinscrewExtruder; 4 components gravimetric Batch Blender on CoExtruder

Extruders

1 x ø 2C 135-52 L/D Corotating twin screw with very long, not intermitted high vacuum venting unit;

1 x ø 90–35 L/D Single screw with Reiloy 121 barrel, water cooled and grooved feeding zones, barrier screws made of high grate steel armoured flights

Die Head

3-layer slot-die-head with decklers

Calender

3 rolls horizontal cooling & polishing calendar stack - accepting up to 1.500 N / linear cm calendaring pressure; integrated lamination or extrusion coating unit available on request

Thickness

Control by air cushion sensor

Haul Off

With silicon coating device and dryer are combined in one unique frame; 2 inverter controlled haul-off roller, 1 neoprene rubber coated

Foil accumulator Double rack with stock capacity 40 m, to slow down line speed during reels changing operations 7-layer Alpha PET/PP foil extrusion line

Winding

Automatic Multi-reel winder Revolver Type

Additionally more options and solutions are available on demand

Line Control

Siemens Touchscreen, Bandera software

Tele-service

Digital modem

RAW MATERIALS - Recycling or virgin PET (APET-CPET-GPET-EPET [foam]), PP, PS, PLA or further resins

Alpha PET line: extrusion section and calender section

Foil width

up to 1.750 mm net

Foil thickness

120 ÷ 1.500 µm

Output capacity

max. 2.300 kg/h

Typical applications - General packaging foil, food packaging foil, thermoforming foil or similar applications.

Consumption data Power (installed capacity)

approx 750 kVA

Dimensions

8

Length

35.000 mm

Width

10.000 mm

Height

6.000 mm

Multilayer PET/PP/PS rigid film extrusion plant Alpha Series TECHNICAL DATA

Innovative multi-layers PET complete extrusion line for rigid packaging and PET/PE FFS films application

Line Type

3-layer CoEx-Sheet-Line plus lamination

Dosing Unit

4 components gravimetric dosing unit on TwinscrewExtruder;

4 components gravimetric Batch Blender on CoExtruder

Extruders

1 x ø 2C 85–52 L/D Corotating twin screw with very long, high vacuum venting unit;

1 x ø 65–35 L/D Single screw with Reiloy 121 barrel, water cooled and grooved feeding zones, barrier screws made of high grade steel armoured flights

Die Head

3-layer flat die with internal decklers

Calender

3 rolls horizontal cooling & polishing calender stack - accepting up to 1.500 N / linear cm calendering pressure; integrated lamination or extrusion coating unit available on request

Thickness

Control by air cushion sensor

Haul Off

With silicon coating device and dryer are combined in one unique frame; 2 inverter controlled haul-off roller, 1 neoprene rubber coated

Top accessories fully equipped Best thickness tollerances Specialized for highest standard quality PET films Available also for TDO labels films and furniture special films Dedicated also to new applications of PET thin films as credit card films sector

Foil accumulator Double rack with stock capacity 40 m, to slow down line speed during reels changing operations Winding

2-station cantilever winder with drive management by winder PLC, Manual foil cutting and threading, max. reel diameter 800 mm

Options: Automatic Multi-reel winder

Additionally more options and solutions are available on demand

Line Control

Siemens Touchscreen, Bandera software

Tele-service

Digital modem

RAW MATERIALS - Recycling or virgin PET (APET-CPET-GPET-EPET [foam]), PP, PS, PLA or further resins Foil width

up to 1.380 mm net

Foil thickness

120 ÷ 1.500 μm

Output capacity

max. 1.200 kg/h

Typical applications - General packaging foil, food packaging foil, thermoforming foil or similar applications.

Dimensions Length

35.000 mm

Width

9.000 mm

Height

6.000 mm

Consumption data approx 400 kVA

Ø 700

1700

Power (installed capacity)

9

Innovative and cost effective PET, PP and PS rigid film extrusion line Light Duty Series Cost effective innovative multi-layer PET/PP or PS/PP complete sheet extrusion line for the production of rigid thermoformed packages (IN-LINE version available) Dedicated to thermoforming application (IN-LINE configuration) Best thickness range availability Limited floor space requirement

TECHNICAL DATA Line Type

3 layer CoEx-Sheet-Line

Dosing Unit

4 component gravimetric “loss-in-weight” dosing unit on twin screw extruder or 4 component gravimetric Batch Blender for single screw extruder

Main Extruder

1 x ø 2C 55-52 L/D (for 550 Kg/h - also available 2C 70 for 750 Kg/h) co-rotating twin screw extruder with very long, high vacuum venting unit or as alternative 1 x ø TR 120 32 L/D single screw extruder (PP/PS)

Co-Ex (Option)

1 x ø 65-35 L/D single screw with armoured steel barrel, water cooled and grooved feeding zones, barrier screws made of high grade steel armoured flights

Filter

Two-path hydraulic continuous

Die Head

3-layer black box plus flat die with decklers

Calender

3 rolls horizontal cooling & polishing calender stack with large middle rolls

Haul Off

With silicone coating device and dryer combined in one single frame; 2 inverter controlled haul-off rollers, 1 neoprene rubber coated

Very competitive price Maximum flexibility on raw materials Available also with medium/small outputs Extrusion section with main co-rotating twin screw extruder or single screw extruder

Foil accumulator Double rack with stock capacity 30 m, to slow down line speed during reel changing operations

10

Winding

2-station cantilever winder with drive management by winder PLC, manual foil cutting and threading, or IN-LINE configuration to direct feed thermoforming machine

For winding section additional more options and solutions are available on demand

Line Control

Siemens Touchscreen, Bandera software

Tele-service

Digital modem or Ethernet

Rigid film lines for converting application Agility Line Series TECHNICAL DATA

Innovative multi-layers PET complete extrusion line for rigid and flexible film converting application

Line Type

3-layer CoEx-Sheet-Line plus lamination

Dosing Unit

4 components gravimetric dosing unit on TwinscrewExtruder;

4 components gravimetric Batch Blender on CoExtruder

Extruders

1 x ø 2C 70-42 L/D Corotating twin screw with very long, high vacuum venting unit;

1 x ø 65–30 L/D Single screw with Reiloy 121 barrel, water cooled and grooved feeding zones, barrier screws made of high grate steel armoured flights

Die Head

3-layer flat die with decklers

Calender

3 rolls horizontal cooling & polishing calender stack linear cm calendering pressure; integrated lamination system

Thickness

Control by air cushion sensor

Haul Off

2 inverter controlled haul-off roller, 1 neoprene rubber coated

Winding

2-station revolver winder with drive management by winder PLC, automatic foil cutting and threading, max. reel diameter 800 mm

Line Control

Siemens Touchscreen, Bandera software

Tele-service

Digital modem

Fully automatic operation including PE film lamination process Complete with raw material feeding equipment and automatic winding unit even in limited floor space requirement Whole complete production island with “plug&play” modular installation Dedicated to short production slots avoiding scraps

RAW MATERIALS - Recycling or virgin PET (APET-CPET-GPET-EPET [foam]), PP, PS, PLA or further resins Foil width

up to 860 mm net

Foil thickness

180 ÷ 900 µm

Output capacity

max. 550 kg/h

Typical applications - Form, fill, seal and converting application plus food and thermoforming foil.

Consumption data Power (installed capacity)

approx 400 kVA

Dimensions Length

12.000 mm

Width

8.000 mm

Height

5.000 mm

RAW MATERIAL FEEDING

A

Mission: the future of extrusion Bandera mission is to affirm itself as the widest toprange Extrusion Centre for Excellence in Europe, focusing on cutting-edge technological production lines for plastics processing in the blown film, sheet & foil and pipe extrusion fields to be main actor of the future of extrusion.

EXTRUSION SECTION AT UPPER FLOOR

ESTRUSORE MONOVITE TR65 35D

PIPE-POMPA MELT

4 1

3 2

TERMOREGOLAZIONE

C

PIPE-POMPA MELT

6300

CONTROLLO SPESSORE

TERMOREGOLAZIONE

GRUPPO ASPIRAZIONE

ESTRUSORE BIVITE 2c55 42D

A

11800

11

The initial choice for PET/PP sheet production New Beta Series TECHNICAL DATA

Beta pet foil extrusion line

Line Type

3-layer CoEx-Sheet-Line

Dosing Unit

4 components gravimetric dosing unit on TwinscrewExtruder;

4 components gravimetric Batch Blender on Co-Extruder

Extruders

1 x ø 2C 85–52 L/D (for 1,2 tons/h – available also 2C 70 for 700 Kg/h) Corotating twin screw with very long, high vacuum venting unit;

1 x ø 65–35 L/D Single screw with Reiloy 121 barrel, water cooled and grooved feeding zones, barrier screws made of high grade steel armoured flights

Die Head

3-layer black box plus flat die with decklers

Calender

3 rolls sloping cooling & polishing calender stack

Thickness

Control by air cushion sensor

Haul Off

With silicon coating device and dryer are combined in one unique frame; 2 inverter controlled haul-off roller, 1 neoprene rubber coated

Foil accumulator double rack with stock capacity 30 m, to slow down line speed during reels changing operations Winding

2-station cantilever winder with drive management by winder PLC, Manual foil cutting and threading, max. reel diameter 800 mm

Options: Automatic Multi-reel winder

Additionally more options and solutions are available on demand

Line Control

Siemens Touchscreen, Bandera software

Tele-service

Digital modem or Ethernet

RAW MATERIALS - Recycling or virgin PET (APET-CPET-GPET-EPET [foam]), PP, PS, PLA or further resins Foil width

from 820 to 1.320 mm net 200-900 µm (PET) 180-1600 µm (PS) 350-1800 µm (PP) 700 - 1.200 kg/h

Foil thickness Output capacity

Typical applications - General packaging foil, food packaging foil, thermoforming foil or similar applications.

Consumption data Power (installed capacity)

approx 400 kVA

Dimensions Beta PET Line: line supervision pc (17” touch)

12

Length

27.000 mm

Width

9.000 mm

Height

6.000 mm

Lamination New packaging solutions

PET IN-LINE ROLL PRESSURE LAMINATION SYSTEM IN-LINE LAMINATION WITH POLYETHILENE FILM

LAMINATION FILM

{

PE TIE RESINS VIRGIN MATERIAL (LAYER A) PET FOIL

A B A

100% RECYCLED PET (LAYER B)

Standard layout of pressure roll lamination system and final product structure Final products / main applications for PET + PE (… Barrier) foil - some examples

PET/PP/PS IN-LINE “HOT MELT” LAMINATION

IN-LINE LAMINATION WITH EVOH BARRIER FILM

LAMINATION FILM

{

PE TIE RESINS EVOH TIE RESINS

A B A

VIRGIN MATERIAL (LAYER A)

PET FOIL

100% RECYCLED PET (LAYER B)

Standard layout of “Hot Melt” lamination system and final product structure

13

Extrusion - coating New packaging solutions IN-LINE COATING TECHNOLOGY The IN-LINE coating system allows the user to have full flexibility in terms of raw material choice and management, thus resulting in large potential reduction of production costs compared to standard multilayer foil technology.

Standard PET foil - usually featuring A-B-A structure - is afterwards (slightly) pre-heated and coated with barrier layers (EVOH and tie resin) and/or PE layers.

PE TIE RESINS

All resins are processed through small single screw extruders mounted on a dedicated support frame. Coating is by an automated multi-manifold die and special designed chill roll equipment.

EVOH TIE RESINS

VIRGIN MATERIAL (LAYER A) PET FOIL

A B A

100% RECYCLED PET (LAYER B)

The adhesion between PET and PE barrier layers is extremely high - in all probability the best on the market. The IN-LINE coating system has furtherly widened Bandera expertise in this field, thus becoming one of Bandera flagships.

Bandera technology can be applied to PP and PS sheet and retrofitted to existing extrusion lines.

PE TIE RESINS

VIRGIN MATERIAL (LAYER A) A B A

PET FOIL 100% RECYCLED PET (LAYER B)

Final product structures

Main polishing and cooling stack Standard coating equipment layout

Coating section

14

The ultimate innovative solutions: lowering packages weight FOAM PET SHEET Bandera has recently focussed on the foam PET sheet field (patent no.

MI2008A00348) with the application of its ultimate co-rotating twin screw extruder (52:1 L/D).

Current foam PET sheet is produced by processing virgin PET with foaming agents. Being the latter very expensive, production costs are high. Furthermore, final products have proved to be almost un-recyclable.

Bandera has based its latest research on physical foaming (i.e. by gas injection) using recycled PET flakes (from post-consumer and industrial waste), i.e. significant cost savings on raw materials and product total recyclability.

BANDERA TECHNOLOGY. AMAZING FLEXIBILITY A standard Bandera PET rigid sheet extrusion line can be versatilely converted to foam PET sheet production (universal extrusion twin screws design for both rigid and foam PET production) by adding an appropriate gas injection system and process adjuvants.

To obtain a superior quality foam PET sheet, Bandera is able to supply dedicated extrusion equipment to optimize the whole extrusion process.

Some PET foam equipment in working condition: extrusion section, die & calender, PET foam melt

Results obtained by Bandera R&D are definitely interesting and encouraging. Typical A-PET rigid sheet density is 1.33 ÷ 1.35 kg/ dm3. In case of ABA or BBB structure (B layer being 100% Post Consumer Waste - mixed with industrial skeleton waste) weight reduction values are the following: Total sheet thickness: 300µ ÷ 600µ Density achieved: ~ 0.70kg/dm3 Total sheet thickness: 600µ ÷ 1.3mm Density achieved: ~ 0.40kg/dm3 Weight reduction rate strongly depends on final application.

Significant production cost savings have been achieved by replacing rigid box liners with foam liners.

Bandera tailor-made multilayer PET foil extrusion line

Bandera has once again confirmed its pacesetting attitude - the development of new products is combined with cost savings and environment friendly commitment focussed on turning plastic materials into eco-friendly lower weight packaging, strongly demanded by both food and non-food markets.

PET foam final products - some examples PET foam final applications - some examples

15

Advantages of Bandera as technological partner Over the most recent months Bandera has managed to strengthen its leading position on packaging market worldwide - the supply of several A-PET, C-PET, PET-G, PP, PS and PLA sheet extrusion lines has ranked the renowned Italian company on top of major extrusion companies.

Several Bandera customers are major supplier of packaging products for the most important food industries worldwide, capable of outstanding for the following: Great expertise in running complete extrusion lines featuring 120 µm ÷150 µm minimum thickness Possibility to combine single screw vented extruders to produce A-B-A configuration external layers (no need for dehumidification) Great number of references worldwide (major converting companies in Europe, Asia and Middle East) Unique experience in PE and PE/tie/EVOH processing through film lamination and extrusion coating Employ of automatic dies with great results on sheet planarity performances Great experience in providing automated multi-reel winders (2, 3 or 4 reels on the same shaft) Wide experience in integrating ancillary equipment (including global line supervision with PC up to raw material handling and transporting) Accredited sub-suppliers/vendors of special electronic components supported by dedicated service Complete PET line up to 1,5 tons

Experienced and prompt customer care, supported by training and after sales service (prompt reaction to customers’ needs - live emergency service and teleassistance) Thanks to its expertise and engineering skills, Bandera provides full and prompt technical support for revamping, upgrading and refurbishment projects. Bandera offer range includes special equipment such as “drilled” designed calender rolls, extrusion screws, barrels and single components, flat dies and relevant accessories, several downstream ancillary equipment obtained - from specific proprietary design and manufacture process (either standard or customized as per individual requirements).

16

Revamping of existing equipment and complete lines

Guarantee on demand over 24 months

SERVICING PLANTS FOR EXTRAORDINARY MAINTENANCE

“On-site” personalized training for new applications

Offers for effective spare parts packages

Fast and appropriate (mechanical/ electronic/processing) technical service

4 service centers covering the global market

Technical service Bandera relies upon its specialists to support its customers with an accurate After-Sales Service, both at the line start-up and testing, and at the production stage. Cutting-edge technology is at Bandera customers’ disposal, at any time.

Prospect of a new R&D and wet trials facility for rigid and flexible film lines A dedicated new plant will be finished in 2014 to let the activities of R&D industrial

In order to comply with its customers’

tests and complete line wet trials be executed in a detached room.

maintenance needs, Bandera has established a dedicated efficient Spare Parts Division.

Pushing on its high tech solutions, Bandera offers its customers turnkey extrusion lines - from engineering and design to construction, assistance and assembly stages. Besides, Bandera has

drawn

up

specific

training

programs dedicated to customers’ personnel - the best way to understand how to operate new machineries and to retrofit existing ones.

17

Reference list - pet rigid film co-extrusion lines Country

Customer

Period of supply

N. of Lines

Country

Customer

Period of supply

N. of Lines

Italy

Aliplast

2003-2010

5

Spain

Bcn Bobine Film

2003/2006/2013

3

Italy

AFG

2009

1

Spain

Coexpan

2010

1

Italy

AMB

2004-2013

5

Spain

Italy

Amprica / Sirap Gema

2003

1

Spain

Inquitex

2007

1

Italy

Arcoplastica

2003-2011

2

Spain

Dynaplast

2007

1

Italy

Aristea

2007

1

Portugal

Kp Films Por

2011/2012

2

Italy

Caltek

2011

1

Greece

Ngp Plastics

2006/2007/2008

3

Italy

Carton Pack

2005/2011

2

Greece

Soulis

2005/2007

2

Italy

Europack

2003

1

France

Coexpan

2007/2010

2

Italy

ILPA

2002-2011

4

Russia

Ecopet

2007-2008

2

Italy

Infia/ Linpac Group

2000-2005

4

Russia

Polier Stirolplast

2011

1

Italy

Moplast

2009

1

Russia

Lada list

2007/2011

2

Italy

Hotform

2009/2010

2

Russia

Motopirs

2011/2013

2

Italy

Pragmagest

2005/2008

2

Poland

Eurocast

2007

1

Italy

Roboplast

2007/2009

2

Thailand

Eastern Polymer

1999

1

Italy

Rpc Cobelplast

2011

1

South Korea

Kp Tech

2007/2012

2

Italy

Tradex

2007

1

Argentina

Bandex

2009

1

Belgium

RPC Cobelplast

2012

1

Chile

Pan Pacific

2009

1

Croatia

Drava International

2012

1

Chile

Oskupack

2012

1

Denmark

Skylight

2012

1

Mexico

Productos Duna

2006

1

Germany

Wipak

2004

1

Iran

Petro Polimer Shargh

2011

1

Germany

Coexpan

2009

1

U.A.E.

Al Bayader

2009

1

Germany

Kp Films D

2009/2011/2012

3

Lebanon

Somoplast

2009

1

Rajshree Polypack

Syria

Kanawati

2009

1

India

2012

1

Israel

SZP

2010

1

Lithuania

Lietpak

2012

1

Netherland

Hordjik

2012

1

UK

Anson Packaging

2006/2009

2

South Africa

Zibo Containers

2012

1

UK

Kp Films UK

2009

1

Turkey

Venpi Plast

2013

1

UK

PPP UK

2003

1

Ukraine

Seaway

2012

1

UK

Flight Plastics

2010/2011/2013

3

UK

TDX

2010

1

USA

2010/2013

7

UK

Sharpack

2007

1

PTI Processing Technologies International LLC (Various converters in North America)

18

Linpac Packaging E 2005/2008/2010

3

Bandera developments in North America PET and PLA

Service centers

• Belgium

(North Europe) • Brazil (South America) • China (Branch Office and Service Centre Asia) • Italy (Head quarters) • USA

(North America)

PET lines sold in the world

From the end of 2010 up today Bandera has assembled 7 HVTSE corotating twin-screw extruder at the largest north American processor in the thermoformable PET and PLA foil extrusion sector. Downstream line section has been designed and manufactured by PTI Processing Technologies International LLC. Bandera and PTI Processing Technologies International LLC - Aurora, Illinois entered a 10-year agreement for the supply of the extrusion lines within North American region. Besides a PLA foil output to reach 2500 Kg/h, the large sized extruder is equipped with a powerful cutting-edge degassing unit for the extrusion of top-quality PET foil.

19

briefinglab.com

PLASTICS MACHINERY EXTRUSION TECHNOLOGY SINCE 1947

Visit www.luigibandera.com to view Bandera’s complete production program

BLOWN FILM

EXTRUDERS

EXTRUDERS FOR STEEL PIPE COATING

PELLETIZING

Costruzioni meccaniche Luigi Bandera SpA Corso Sempione, 120 - I-21052 Busto Arsizio (VA) Italy t +39 0331 398111 - f +39 0331 680206 lbandera@lbandera.com - luigibandera.com Technical specifications provided for illustrative purpose only and subject to change without prior notice.

http://www.luigibandera.net/bandera/en/prodotti/foil-a-sheet/pet.html

Technical specifications provided for illustrative purpose only and subject to change without prior notice.

REV2/RIGIDPET/EN/04/13

Find this brochure directly by the website