Page 1

Buy advanced electronics and control system components from Omron Relays Wholesale Suppliers In all kinds of machines and electrical appliances, sensors are prepared to switch things on or off in a fraction of a second using electromagnetic switch called relays. You can think relays as a type of electric lever switch it on using tiny current; subsequently, it switches on another appliance using a much bigger current. Relays bridge the gap and make possible for small current to activate larger ones. It means relays work either as switches or as amplifiers. Omron Relays Wholesale Suppliers supplies the advanced electronics and control system components, including diodes, relays, microcontrollers, connectors, displays, and integrated circuits among others. Suppose you want to construct an electronically operated cooling system, in order to sense the temperature, you could use some kind of electronic thermometer circuit. Hence, you can connect the thermometer circuit to the input circuit of a relay, once a small current flows in this circuit, the relay will activate its output circuit and allow a much bigger current to flow and will turn the fan on. Relays don’t always turn things on; sometimes they are very useful in turning things off. For instance, when faults occur in power plant equipment and in transmission lines that time you will find there are protective relays trips and prevent any damage from things like current surges. Nowadays, electronic relay based on the integrated circuits do the same job. If the voltage or current exceeds in a circuit than a preset limit, then they measure the voltage or current in the circuit and take action automatically. Depending on the rating, size, application, operating principle and structural features, given below are some of the different types of Omron Relays Wholesale Suppliers supplies that are employed in most of the electronic as well as electrical circuits. 1.

Electromagnetic relays

These relays are built with electrical, mechanical and magnetic components. They have an operating coil and mechanical contacts when the coil gets activated by a supply system, then mechanical contacts get opened or closed. They are of different types:  DC and AC relay: Both relays work on the same principle as electromagnetic induction. DC relays are used to de-energize the coil and in order to prevent eddy current losses; the AC relays use laminated cores.  Attraction type electromagnetic relays: These relays don’t have any time delays so these are used for an instantaneous operation. They can work with both AC and DC supply


ďƒ˜ Induction type relays: These are usable with DC systems and used as protective relays in AC systems alone. ďƒ˜ Magnetic latching relays: When the coil power source is taken away, these relays use a permanent magnet or parts with a high remittance to remain the armature at the same point as the coil is electrified. 2.

Solid state relays

These relays use solid state components to perform the switching operation without moving any parts 3.

Hybrid relays

Hybrid relays are composed of electromagnetic relays and electronic components. 4.

Thermal Relay

These relays are based on the effect of heat and are mainly used in motor protection and consist of bimetallic elements 5.

Reed relays

These relays consist of a pair of magnetic strips (also called as reed) that is sealed within a glass tube. The switching operation is performed when the magnetic field applied to the coil is wrapped around this tube that makes these stripes to move.

Advanced electronics and control system components from omron relays wholesale suppliers  

Read the interesting article about advanced electronics and control system components. For more information visit to our website.Read the in...

Advanced electronics and control system components from omron relays wholesale suppliers  

Read the interesting article about advanced electronics and control system components. For more information visit to our website.Read the in...

Advertisement