http://www.exide-nordic.com/pdf/chargers/2100_TP

Taper Charger - for flooded batteries

2100 TP The importance of matching battery and charger cannot be underestimated – so when the world’s leading manufacturer of motive power batteries dedicates years of research to this cause, designing and manufacturing compatible chargers itself in house, you can be assured of the optimum battery performance and life.

Designed to recharge conventional flooded lead acid batteries, the 2100 TP represents a cost effective solution to safely and easily recharge these products in 10, 12 and 14 hours.

Features Charger reflects battery’s needs ■ A microprocessor monitors and controls the charge returned to the battery in accordance with the battery’s state of charge, thus avoiding over and under charge.

Easy to use ■ The charger conducts a selfdiagnostic check when connected to the battery and ensures a complete charge is given. The charge status is continuously indicated on the display.

Ease of maintenance ■ Modular construction is used to reduce spare parts inventory and thus improve parts delivery and service response times.

Self diagnostic ■ The charger, through a sophisticated system of internal analysis, is able to display up to 7 fault codes. For example sulphated batteries are identified to help prevent potential misuse. This information helps promote better battery management and increases the productivity of the critical battery and charger in-vestment.

Operation ■ Quick and simple operation: Connect the battery to the charger; the charge begins automatically and continues until the battery is fully charged. A microprocessor controls the charge and LEDs indicate the operation status and any anomalies.

All products manufactured to ISO 9001 standards. The charger manufacturing plant is certified to ISO 14001 enviromental standards.

Features Mains failure protection ■ In the event of mains failure, data is saved to enable charge to continue safely on reinstatement of the mains supply.

Protection ■ Safety timers are incorporated to prevent accidental over charging.

Polarity reversal and output short circuit protection are provided.

Maintenance charges ■ If a battery is not used but left connected to the charger it will automatically receive periodic refreshing charges to ensure it is maintained in optimum condition ready for use.

Manufacturing standards ■ Chargers are produced in accordance with ISO 9001 certification using the highest quality components. The charge profile matches the DIN 41774 characteristic.

Mains input Cell Voltage

V/Cell

Single phase: 230V +/- 6% tappings Three phase: 400V +/- 6% tappings

Time

Charge profile Wa following DIN 41774

Range TP: Wa characteristic

Selection table for 2100 TP

Capacity range, C5 in Ah Charge profile and

Recharge time (h)

Three phase (T)

Single phase (S)

Wa

battery technology

Voltage (V)

Charger specification

Standard ‘Classic’ 10* hours

12* hours

14* hours

Input current @ 230 V

Cubicle size

Weight +/-10%

Input current @ 400 V

kg

A

A

Current (A)

24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24

10 15 20 25 30 35 40 50 60 70 80 90 100 120 140 160 180 200

63 94 125 156 188 219 250 313 375 438 500 563 625 750 875 1000 1125 1250

77 115 154 192 231 269 308 385 462 538 615 692 769 923 1077 1231 1385 1539

93 136 182 227 273 318 364 455 545 636 727 818 909 1091 1273 1455 1636

1.8 2.7 3.7 4.6 5.5 6.4 7.3 9.1 11.0 12.8 14.6 16.4 18.3 21.9

M2 M2 M2 M2 M2 M2 M2 M2 M2 M3 M3 M3 M4 M4

15 17 18 20 22 24 27 33 34 35 37 40 44 45

36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36

10 15 20 25 30 35 40 50 60 70 80 90 100 120 140 160 180 200

63 94 125 156 188 219 250 313 375 438 500 563 625 750 875 1000 1125 1250

77 115 154 192 231 269 308 385 462 538 615 692 769 923 1077 1231 1385 1539

93 136 182 227 273 318 364 455 545 636 727 818 909 1091 1273 1455 1636

2.7 4.1 5.5 6.8 8.2 9.6 11.0 13.7 16.4 19.2 21.9 24.7 27.4 32.9

M2 M2 M2 M2 M2 M2 M2 M3 M3 M3 M3 M3 M4 M4

20 22 24 25 26 29 34 38 39 42 46 47 49 54

48 48 48 48 48 48 48 48 48 48 48 48 48 48 48 48 48 48

10 15 20 25 30 35 40 50 60 70 80 90 100 120 140 160 180 200

63 94 125 156 188 219 250 313 375 438 500 563 625 750 875 1000 1125 1250

77 115 154 192 231 269 308 385 462 538 615 692 769 923 1077 1231 1385 1539

93 136 182 227 273 318 364 455 545 636 727 818 909 1091 1273 1455 1636

3.7 5.5 7.3 9.1 11.0 12.8 14.6 18.3 21.9 25.6 29.2 32.9

M2 M2 M2 M2 M2 M3 M3 M3 M3 M3 M4 M4

21 23 25 27 32 37 39 40 45 50 52 55

*Recharge time+/- 5 %

Cubicle size

Weight +/-10% kg

2.2 2.5 3.2 3.8 4.4 5.0 5.7 6.3 7.6 8.8 10.1 11.3 12.6

M3 M3 M3 M3 M3 M3 M3 M3 M4 M4 M4 M5 M5

49 51 52 53 54 56 59 62 67 69 75 82 85

3.3 3.8 4.7 5.7 6.6 7.6 8.5 9.5 11.3 13.2 15.1 17.0 18.9

M3 M3 M3 M3 M3 M3 M3 M4 M4 M4 M4 M5 M6

50 52 52 53 54 57 60 64 68 70 77 85 88

4.4 5.0 6.3 7.6 8.8 10.1 11.3 12.6 15.1 17.6 20.2 22.7 25.2

M3 M3 M3 M3 M3 M3 M4 M4 M4 M5 M5 M6 M6

50 53 54 55 57 59 68 72 80 81 86 88 91

Selection table for 2100 TP

Capacity range, C5 in Ah Charge profile and

Three phase (T)

Single phase (S)

Wa

battery technology Recharge time (h)

Charger specification

Standard ‘Classic’

Input current @ 230 V

Cubicle size

Weight +/-10%

Input current @ 400 V

kg

A

10* hours

12* hours

14* hours

10 15 20 25 30 35 40 50 60 70 80 90 100 120 140 160 180 200

63 94 125 156 188 219 250 313 375 438 500 563 625 750 875 1000 1125 1250

77 115 154 192 231 269 308 385 462 538 615 692 769 923 1077 1231 1385 1539

93 136 182 227 273 318 364 455 545 636 727 818 909 1091 1273 1455 1636

5.5 8.2 11.0 13.7 16.4 19.2 21.9 27.4

M3 M3 M3 M3 M3 M3 M3 M3

55 58 60 63 65 68 71 73

10 15 20 25 30 35 40 50 60 70 80 90 100 120 140 160 180 200

63 94 125 156 188 219 250 313 375 438 500 563 625 750 875 1000 1125 1250

77 115 154 192 231 269 308 385 462 538 615 692 769 923 1077 1231 1385 1539

93 136 182 227 273 318 364 455 545 636 727 818 909 1091 1273 1455 1636

6.1 9.1 12.2 15.2 18.3 21.3 24.3 30.4

M3 M3 M3 M3 M3 M3 M3 M3

57 60 62 65 67 70 72 73

Voltage (V)

Current (A)

72 72 72 72 72 72 72 72 72 72 72 72 72 72 72 72 72 72 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80

A

*Recharge time+/- 5 %

Cubicle dimensions Cubicle

M2 M3 M4 M5 M6

Widh W mm 420 500 500 600 600

Nomenclature 2100 TP 48 S 080 48V Single phase 80A

Dept D mm 350 430 430 530 600

Height H mm 290 660 800 900 1065

Cubicle size

Weight +/-10% kg

6.6 7.6 9.5 11.3 13.2 15.1 17.0 18.9 22.7 26.5 30.2 34.0 37.8

M3 M3 M4 M4 M4 M4 M4 M4 M5 M5 M6 M6 M6

64 67 71 72 75 78 81 86 91 96 105 115 130

7.4 8.4 10.5 12.6 14.7 16.8 18.9 21.0 25.2 29.4 33.6 37.8 42.0

M3 M3 M4 M4 M4 M4 M4 M4 M5 M5 M6 M6 M6

66 69 72 75 77 85 86 87 94 105 110 120 140

Exide Technologies Industrial Energy – Energy solutions for a world on the move.

Exide Technologies is the global leader in stored electrical energy solutions with subsidiaries in more than 80 countries. Based on over 100 years of experience in technological innovation, we are partners of OEM and serve the spare parts market for industrial and transportation applications.

Exide Technologies takes pride in its commitment to a better environment.

Its Total Battery Management programme, (an integrated approach to manufacturing, distributing and recycling of lead acid batteries), has been developed to ensure a safe and responsible life cycle for all of its products.

Exide Technologies GmbH Im Thiergarten 63654 Büdingen – Germany Tel.: +49 (0) 60 42 / 81 454 Fax: +49 (0) 60 42 / 81 398 www.industrialenergy.exide.com

MXETPTEPDF01109

Subject to alterations

Our Global Industrial Energy Business Unit offers an extensive range of storage products and services, inclu ding solutions for telecommunications

systems, railway applications, mining, photovoltaic (solar energy), uninterruptible power supply (UPS), electrical power generation and distribution, fork lifts and electric vehicles.