GETTING STARTED
PROFILE DEPTH
At SEG Systems, it all starts with a frame. We offer multiple extrusion depths to best suit your needs. The blue tab at the top of each page will help you identify the frame depth at a glance.
MEDIA TYPE
When it comes to graphics, you can choose to use a fabric Silicone Edge Graphic (SEG), a rigid graphic, or both! This tab lets you know which print substraight can be used in each extrusion.
BACKLIT
If you are looking for a lightbox extrusion, some extrusions are designed to be internally lit. The yellow tab will let you know if the frame profile supports any lighting capabilities.
MOUNTING METHOD
SEG Systems offers a few typical ways for your frame to be displayed: wall-mounted, freestanding, or suspended. Use this tab to quickly determine your options for mounting, standing, or suspending.
SINGLE VS. DOUBLE-SIDED
Wall-mounted graphics are one-sided, but freestanding and suspended frames can be two-sided. This tab explains how many sides support graphics.
CORNER EXTRUSION
Many SEG profiles can be configured as 3D displays that form a corner where they meet. If you see this tab, you'll know you can create an inside/outside corner display.
When you see this tab consider adding accessories such as TV mounts, shelves, 3D logos or brackets. ACCESSORIES
TABLE OF CONTENTS
TABLE OF CONTENTS
WHAT IS SEG?
A silicone edge graphic is a high resolution, dye-sublimated fabric, finished with a thin silicone strip. The thin silicone edge is easily inserted into SEG Systems' aluminum frames creating a clean, powerful look for any space.
Graphic Install
CORNERS
Always begin with the corners. Start by inserting the upper left corner of the graphic and then work your way around in a clockwise fashion.
CENTERS
With the corners now squarely in place, grab the center of the graphic along the top edge and insert into the channel. Continue to do the same along each edge, always grabbing in the center.
FINISH
Complete the installation by inserting all remaining edges into the channel. Begin at the center and work your way out towards the corners on each side.
WALL-MOUNTED POSSIBILITIES
Pre-drilled holes for direct wall mounting. Screws inserted through holes and into wall anchors. Fixed to Wall
Z-Cleat
Side View
Mount top Z-cleats. Drop frame onto cleats. Cleat Mounted
Side View
Z-cleat: #2142
Drywall Anchors & Screws: #2140
WALL-MOUNTED POSSIBILITIES
Small Wall Mural Tall Collage Rhombus
Triangle
Split Graphic
Header Circle
Mix Shapes
Pennant
TV Mount
Door Surround
FREESTANDING POSSIBILITIES
Lollipop
Graphics + Shelves
Multiple
Curved
Custom Angles
FREESTANDING POSSIBILITIES
DOUBLE-SIDED STANDARD FEET 1.7" DOUBLE-SIDED CUSTOM MILLWORK BASE
DOUBLE-SIDED LOLLIPOP BASE
DOUBLE-SIDED BASE PLATE
DOUBLE-SIDED STEEL RISER BASE
SINGLE-SIDED RISER FEET
SUSPENDED POSSIBILITIES
Wide or Tall Post Collage Tension Display Custom Shapes
Ceiling Panel
Ceiling Tiles
Waterfall Tension Display
Chandelier
Tubular Cube
Custom Angles
SUSPENDED POSSIBILITIES
SUSPENDED TRIGON
CUSTOM SHAPE
CORNER EXTRUSION POSSIBLITIES
Towers
Crowd Control
Build Walls
Desk
Glorifier
CORNER EXTRUSION POSSIBLITIES
SHOP-IN-SHOP
4.5" TOWERS
3.0" CUBICLES
BACKLIT POSSIBILITIES
Stand out from the crowd by adding lighting to your fabric frame. Don’t know where to start? When determining the best lighting for your SEG frame, there are five key factors to consider: environment, imagery, brightness, budget, and lifespan. Competing light sources in your current environment are important, as well as the imagery style you choose for your fabric and the brightness you wish to portray. Your budget and expected lifespan of the frame go hand-in-hand, and we will help guide the way when it is time to make a decision.
BACKLIT POSSIBILITIES
SEG .625
Cross-Section
In
Steel
Stocked
Stocked
Powder
ADA
.625"
SEG .625 ECONO
Extrusion Frame
Silicone Bead Fabric Graphic
SEG 1.0
Profile View
Cross-Section
In stock
Steel hardware
Stocked in silver
Stocked in matte black
Powder coating available
Bend to custom shapes
ADA compliant for wall mounted displays
SEG 1.0 HD
Cross-Section
In stock
HD aluminum hardware
Stocked in silver
Powder coating available Bend to custom shapes
ADA compliant for wall mounted displays
1.0"
Best Practice:
Create a large scale wall display that requires support bars to hold shape during installation
Extrusion Frame
Silicone Bead Fabric Graphic
1.25
SEG 1.28 RETRO
SEG 1.5
Extrusion Frame
Silicone Bead Fabric Graphic
SEG 1.5 RIGID SINGLE-SIDED
SEG 1.5 RIGID DOUBLE-SIDED
Extrusion Frame Rigid Panel
SEG 1.5 HYBRID
SEG 1.5 SOLID CORE
SEG 1.5 REVEAL
SEG 1.7
SEG 2.0 HYBRID
Create
SEG 2.0 REVEAL
SEG 2.5 HYBRID
SEG 3.0 ECONO
Cross-Section
In stock
Steel hardware
Stocked in silver Powder coating available ADA compliant for wall-mounted displays
Profile Features: Use As: 3.0"
Backlit with perimeter Wall-mounted Single-sided
SEG fabric graphics Support bars Use With:
Create a cost-effective lightbox display optimized for perimeter LED's Best Practice:
Profile View
Extrusion Frame Silicone Bead Fabric Graphic Fabric Blockout
SEG 3.0 SINGLE-SIDED
SEG 3.0 DOUBLE-SIDED
FIXED
SEG 3.35
SEG 3.5
SEG 4.0 ECONO
Create
SEG 4.0
Profile View
SEG 4.5
SEG 4.75 HD
SEG 8.0 HD
1.7 INSIDE/OUTSIDE CORNER
3.0 INSIDE/OUTSIDE CORNER
4.5 INSIDE/OUTSIDE CORNER
4.75 OUTSIDE CORNER
8.0 INSIDE/OUTSIDE CORNER
TRIGON
Tension Lock
Trigon Profile
CUBE
1X2 LOLLIPOP POST
Profile View
BANNER RAIL
Top Hanger Clip
Top Hanger Clip
Silicone Bead
Extrusion Frame Silicone Bead Fabric Graphic
FABRIC CROWD CONTROL
RIGID CROWD CONTROL
SEG SNAP!™ SNAP FRAME
View
ADA Compliant for Wall-mounted Displays Profile Features:
BACKLIT SNAP™ FRAME
Profile View
VELCRO BLOCKOUT FLANGE
Velcro Flange
Velcro
REVERSE-LOAD INSERT
Reverse Insert slides into slots in the existing profile.
REVERSE-LOAD INSERT
Graphic Install Instructions:
With the reverse-load insert, a graphic is loaded using the same method as traditional lightboxes, but instead through the rear of the lightbox. With this method, the silicone edge is hidden from sight when viewing through a window. The insert allows a frame to be double-sided without the hassle of trying to install a lightbox in a tight space.
Profile View
Silicone edge is not visible
Rear View
Front View
Reveal
Place this frame face against glass.
SUPPORT BARS
Cross-Section
Profile Features:
Support bars are used for reinforcement of an SEG
Tension
are
SUSPENDED HARDWARE
13’ & 22’ length 1/16" galvanized aircraft cable
Ceiling to floor suspension
HANGRAIL BRACKETS
Best Practice:
Use these brackets to hang SEG frames from a 0.5" retail hangrail system Allows full adjustability for perfect fit
We'll help you determine the right quantity and style of brackets to use as we better understand your unique application
Profile View
Left
Right
Large #2147
#2148 #2149
LIGHTBOX DIVIDER
RIGID PANEL DIVIDER
TV MOUNT
3.0"
Engage event-goers and clients with dynamic content by mounting a monitor to the face of your SEG graphic display This bracket allows full adjustability for customizable placement and is powder coated white to reflect light within backlit displays
Cross-Section
Profile View
Acrylic Face
Extrusion Frame Acrylic Face
8.0" (1/2 scale) 1.5"
SLATWALL
Cross-Section
Use slatwall within select SEG profiles to create merchandisable displays Profile Features: Best Practice:
Limited stock Stocked in silver Powder coating available
Profile View
SLATWALL BRACKETS
Profile View
Hang SEG frame from slatwall
Flange Mount
Cradle Mount
Cradle Mount Bracket
Flange Mount Bracket
#2143 #2144
CORNER KEYS & SPLICES
Corner Keys
Econo Corner
Econo Splice Steel Splice Blank Steel Splice
T Splice Aluminum T Splice with Buttonhead Screws
Heavy Splice
#2052 #2050 #2051
#2053 #2053 #2054
STOCK FEET
Steel base with pole is for freestanding frames over 12 ft. tall
Base with Pole
CUSTOM FEET
Profile View
Hexagon
Diamond Oval
Logo Star
ROLLING FEET
#2236
BASE PLATES
Profile View
x 14.5"
x 24"
x 36"
Lollipop Base
Small Base Plate
Large Base Plate #2227 #2218 #2221
STANDARD PERIMETER
#2704
Plug and Jumper
6 LED: #2750 (6500K)
OUTDOOR AC LIGHTBAR
Specifications
MESH LIGHTING
MESH: #2714
LIGHT GUIDED PANEL (LGP)
MESH
#2715
#2709 , 6500K: #2708
Specifications
Specs:
Voltage 24V DC
LED Angle 180º
LED Quantity 4 per diode
Brightness (per strip) 800 Lumens per Sq. Ft.
Power Supply Class 2
Color Temp (K) 6500K/4100K
Estimated Lifetime 100,000 Hrs
Rating IP68
Warranty 80,000 Hrs
Power Consumption 1.13W each
HALO LIT SEG WALL MOUNT
Product Attributes
Dimensional Drawing
Profile View
STRIP TAPE LIGHTING
3D LIT LETTERS & LOGOS
Face Lit
Top Return Lit
FACE
EDGE-LIT ACRYLIC
BEST PRACTICE: Ideal for highlighting specific products or brands while lit or nonlit if power is not easily accessible.
PREMIUM 100W
DIMMABLE 100W
Profile View
EXTERNAL 12V - 60WATT
Profile View
Top View
Side View
EXTERNAL 24V - 60WATT
Top View
Side View
EXTERNAL 24V - 90WATT
Profile View 24V
Top View
Side View
LED CONTROLLER
C-PWM-5A4-OD
Technical Parameters
Profile View
Features
Multiple zones can be controlled separately or synchronously with unlimited receivers in each zone.
Can be controlled by APP installed on IOS or Android mobile devices without a WiFi-RF converter
Brightness of each R, G, B, and W color can be adjusted to achieve millions of colors.
Full compatibility with a variety of single color, dual color, RGB and RGBW LED’s.
Each receiver can be controlled by up to 8 remotes.
Radio frequency available: 869.5 / 434 / 916.5 MHz.
Waterproof WiFi and RF RGBW LED controller.
Compatible with RF remote or App control.
IP67 Rated.
UL Rated.
How to Pair with a RF Remote
Pair using the Learning Key:
1. Wire and power on the receiver according to specifications.
2. Turn on the remote.
3. Click the “LEARNING KEY” button on the receiver.
4. Immediately click a zone number on the remote to pair the receiver to the specified zone.
5. Touch the color wheel or slider on the remote. The connected led light on the receiver flickers twice, which indicates a successful pairing.
NOTE: One receiver can be paired to a maximum of 8 remote controls.
Delete the Pairing:
1. Press and hold the “LEARNING KEY” button on the receiver for over 3 seconds until the connected led light flickers twice indicating successfully deleted.
LED CONTROLLER
Wiring Diagram