Why the Driveshaft of the Car Make Noise while Turnings

WHY THE DRIVESHAFT OF THE CAR MAKE NOISE WHILE TURNINGS?

Every car has at least one differential that allows the wheels to move and rotate.

To rotate the driveshaft, power goes to the transmission while running the engine.

Driveshaft transfer power over the differentials that allow the wheels to rotate.

When you found problems in the driveshaft, you will experience noises during:

BRAKING

TURNING

GOING IN REVERSE

Below points define the reasons behind the noises from the driveshaft during turnings:

DAMAGED BEARINGS

Rubber bearing inside the driveshaft is allowing it to function properly.

If the bearing is damaged, then the driveshaft starts making a lot of strange noises.

WORN U-JOINTS

U-joints are used in the driveshaft for rotating and moving the differentials.

When the U-joints are worn out, you will hear a strange noise from driveshaft like: ďƒź Ratting ďƒź Scraping

FAILED TUBE

Driveshaft has tubes that spin in the middle of the car is in motion.

But the failing tube will usually cause clunking noise or strange sound in the car.

SLOPPY DRIVESHAFT

Failing U-joints cause the driveshaft to get loose and dislocated under the car.

Each time you step on the brake or turn the steering wheel, the noise will get louder.

CONCLUSION

If you notice any types of noises from the driveshaft, check it as soon as possible.

Take the car to a reputed mechanic for fixing the driveshaft issues immediately.

THANK YOU https://www.europeanservicecenter.com/