Liebherrr Mobile Crane Ltm 1200 5 1 Operating Instruction

Page 1

LIEBHERR Mobilecranewithtelescopicboom LTM1200-5.1 LTM1200-5-1-007+009 abMuli001 Operatinginstructions BAL-No.:21000-04-02 Pages:1662 Works-Number Date ORIGINALOPERATINGMANUAL Theoperatingmanualispartofthecrane! Itmustalwaysbeavailablewithinreach! Thetrafficregulationsandthoseforcraneoperation mustbeobserved! Liebherr-WerkEhingenGmbH Postfach1361 D-89582Ehingen/Donau :+49(0)7391502–0 Fax:+49(0)7391502–3399 :info.lwe@liebherr.com www.liebherr.com 1 Liebherrr Mobile Crane Ltm 1200 5 1 Operating Instruction Full download: http://manualplace.com/download/liebherrr-mobile-crane-ltm-1200-5-1-operating-instruction/ This is the cut pages sample. Download all 1662 page(s) at: ManualPlace.com

Foreword

General

Thiscranewasbuiltaccordingtothestateoftechnologyandrecognizedsafetytechnicalregulations. Despitethat,dangerstobodyandlifefortheuserand/orthirdpersonsordamagetothecraneand/ orothermaterialassetscanoccur.

Thiscranemayonlybeused:

–inimpeccabletechnicalcondition.

–fordestineduse.

–bytrainedpersonnel,whichactsinasafetyanddangerconsciousway.

–whennosafetyrelevantproblemsarepresent.

–whennomodificationsweremadeonthecrane.

Anyproblems,whichcouldaffectsafetymustbefixedimmediately.

ModificationsonthecranemayonlybemadewithwrittenapprovalbyLiebherr-WerkEhingenGmbH.

Datarecordingdevice

Thiscraneisequippedwithadatarecordingdevice.Amongothers,thefollowingdataisrecorded: –Dateandtimeofday

–Enteredconfigurationofthecrane

–Actualload

–Percentageofutilizationofthecrane

–Workingradius

–Mainboomangle,luffingjibangle

–Totaltelescopicboomlength,lengthofeachtelescopicsection

–Everyactuationofbypassdevices

Therecordeddatacanbereadwitharespectivesoftware.

Safetyandwarningnotes

Safetyandwarningnotesaredirectedtoallpersonswhoworkwiththecrane.

Theterms DANGER, WARNING, CAUTION and NOTICE usedinthecranedocumentationare intendedtopointoutcertainrulesofconducttoallpersonsworkingwiththecrane.

LIEBHERR 2

ing signs

Signal word Explanation

DANGER

Designatesadangeroussituationwhichwillleadtodeathorseriousinjuryif itisnotprevented 1)

WARNING Designatesadangeroussituation,whichcanleadtodeathorseriousinjuryif itisnotprevented.1)

CAUTION

NOTICE

Designatesadangeroussituation,whichcanleadtoslightormedium-grade injuriesifitisnotprevented.1)

Designatesadangeroussituation,whichcanleadtopropertydamageifitis notprevented.

1) Thiscouldalsoresultinpropertydamage.

Additionalnotes

Theterm Note isusedinthecranedocumentationtomakeallpersonsworkingwiththecraneaware ofusefulinformationandtips.

SignSignal word Explanation

Note

Cranedocumentation

Designatesusefulinformationandtips.

Thecranedocumentationiscomprisedof:

–allsupplieddocumentsonpaperandindigitalform. –allsuppliedprogramsandapplications.

–allsubsequentlysuppliedinformation,updatesandaddendaforthecranedocumentation.

Thecranedocumentation:

–makesitpossibleforyoutooperatethecranesafely.

–supportsyoutoutilizethepermissibleapplicationpossibilitiesofthecrane.

–providesyouwithinformationaboutthefunctionalityofimportantcomponentsandsystems.

Note

Terminologyinthecranedocumentation.

Certainexpressionsareusedinthecranedocumentation.

Inordertoavoidmisunderstandings,thesameexpressionsshouldalwaysbeused.

TranslationsfromtheGermanversionofthecranedocumentation:Thecranedocumentationhas beentranslatedtobebestofone’sknowledge.Liebherr-WerkEhingenGmbHassumesnoliabilityfor translationerrors.TheGermanversionofthecranedocumentationissolelyapplicableforfactual accuracy.Ifyoufindanyerrorsorifanymisunderstandingsarisewhenreadingthecrane documentation,pleasecontactLiebherr-WerkEhingenGmbHimmediately.

028189-06 0.01Foreword
WarnLIEBHERR 3 0.01

WARNING

Dangerofaccidentduetoincorrectoperationofthecrane!

Incorrectoperationofthecranecanleadtoaccidents!

Personnelcanbekilledorseriouslyinjured!

Thiscouldresultinpropertydamage!

Onlyauthorizedandtrainedexpertpersonnelarepermittedtoworkonthecrane.

Thecranedocumentationispartofthecraneandmustbeaccessibleonthecrane.

Thecranedocumentationandon-siteregulationsandspecifications(suchasaccidentprevention regulations)mustbeobserved.

Usingthecranedocumentation:

– makesiteasier tobecomefamiliarwiththecrane.

– avoids problemsduetoimproperoperation.

Observingthecranedocumentation:

– increases reliabilityinuse.

– extends theservicelifeofthecrane.

– minimizes repaircostsanddowntime.

Placethecranedocumentationaccessibleinthedriver'scaborinthecranecab.

WARNING

Outdatedversionofcranedocumentation!

Ifsubsequentlysuppliedinformation,updatesandaddendatothecranedocumentationarenot observedandadded,thereisadangerofaccidents!

Personnelcanbekilledorseriouslyinjured! Thiscouldresultinpropertydamage!

Observeandaddallsubsequentlysuppliedinformation,updatesandaddendaforthecrane documentation.

Makesurethatallaffectedpersonsalwaysknowandunderstandthelatestversionofthecrane documentation.

WARNING

Cranedocumentationisnotunderstood!

Ifpartsofthecranedocumentationarenotunderstoodandthetasksarecarriedoutonorwiththe crane,thenthereisadangerofaccidents!

Personnelcanbekilledorseriouslyinjured!

Thiscouldresultinpropertydamage!

ClearupopenquestionsregardingthecranedocumentationwithLiebherrServicebeforecarrying outtherespectivetask.

Thisdocumentationmaynotbereproducedorduplicated,distributedorusedforpurposesof competition,neitherinpartnorinexcerpts.Allrightsareexpresslyreservedinaccordancewith copyrightlaws.

Allaccidentpreventionguidelines,operatinginstructions,loadchartsetc.arebasedondestineduse ofthecrane.

028189-06 0.01Foreword LIEBHERR 4 0.01
028189-06 0.01Foreword LIEBHERR 5 0.01 blankpage!
028189-06 0.01Foreword LIEBHERR 6 0.01 B110001

CEmarking

TheCEmarkingisamarkaccordingtoEUlaws:

–CraneswithCE-markingaccordingtotheEuropeanmachinerydirective2006/42/ECandtheEN 13000!DatatagCranewithCE-marking,seeillustration 1

–CraneswhichareoperatedoutsidetherespectiveareaofapplicationdonotrequireaCEmarking. DatatagCranewithoutCEmarking,seeillustration 2.

–ItisprohibitedtomarketandoperatecraneswithoutCEmarking,whichdonotmeetthe product-specificregulationsvalidinEurope,whenaCEmarkingisspecifiedforthecountry.

–Itisprohibitedtooperatecraneswithatippingloadutilizationof85%whichareprogrammed accordingtoASMEB30.5withintheEuropeanUnionorincountrieswhichpermitalower stationarystabilityutilization(forexampleISO4305)!Thenationalregulationsapply.These cranesmaynothaveaCEmarking!

Destineduse

Thedestineduseofthecraneconsistssolelyinverticalliftingandloweringoffreeandnon-adhered loads,whoseweightandcenterofgravityareknown.

Todoso,ahookorhookblockapprovedbyLiebherrmustbereevedonthehoistropeanditmay onlybeoperatedwithinthepermissiblecraneconfigurations.

Drivingwiththecrane,withorwithoutanattachedloadisonlypermissibleifacorrespondingdriving orloadchartisavailable.Thesetupconfigurationsintendedforitandthesafetyconditionsmustbe observedaccordingtothecorrespondingcranedocumentation.

Anyotheruseoranyotherexceedingutilizationis not destineduse.

Destinedusealsoincludestheadherenceoftherequiredsafetyguidelines,conditions,prerequisites, setupconditionsandworkingstepsinthecranedocumentation(forexample:Operatinginstructions, loadcharts,erectionandtakedowncharts,jobplanner).

Themanufactureris not liablefordamages,whicharecausedbynon-destineduseorimproperuse ofthecrane.Anyassociatedriskitiscarriedsolelybytheowner,theoperatorandtheuserofthe crane.

028189-06 0.01Foreword LIEBHERR 7 0.01

Non-destineduse

Non -destineduseis:

–Workingoutsidethepermissiblesetupconfigurationsaccordingtotheloadchart.

–Workingoutsidethepermissibleboomradiiandslewingrangesaccordingtotheloadchart.

–Selectingloadcharts,whichdonotcorrespondtotheactualsetupconfiguration.

–Selectionofasetupconfigurationviacodeorviamanualentry,whichdoesnotcorrespondtothe actualsetupconfiguration.

–Workingwithbypassed/deactivatedsafetydevices,forexamplebypassedloadmomentlimitation orwithbypassedhoistlimitswitch.

–IncreasingtheradiusoftheliftedloadafteraLMBshutoff,forexamplebydiagonallypullingthe load.

–Usingthesupportpressuredisplayasasafetyfunctionagainsttippingover.

–Useofequipmentpartswhicharenotapprovedforthecrane.

–Usingthecraneatsportsandrecreationalevents,especiallyfor"Bungee"jumpsand/or"Dinner inthesky".

–Drivingonapublicroadinnon-permissibledrivingcondition(axleload,dimension).

–Drivingwiththeequipmentinplaceinanon-permissibledrivingcondition.

–Pushing,pullingorliftingloadswiththelevelingregulation,theslidingbeamsorthesupport cylinders.

–Pushing,pullingorliftingloadsbyactuatingtheslewinggear,theluffinggearorthetelescoping gear.

–Rippingstuckobjectsloosewiththecrane.

–Utilizingthecraneforalongerperiodoftimeformaterialhandlingtasks.

–Releasingthecranesuddenly(grappleordumpingoperation).

–Utilizingthecranewhentheweightoftheload,whichissuspendedonthecraneischanged,for examplebyfillingacontainersuspendedontheloadhook,except:

•Theloadmomentlimiterwascheckedbeforeforfunctionwithaknownload.

•Thecranecabisoccupied.

•Thecraneisoperational.

•Thecontainersizeisselectedinsuchawaythatanoverloadofthecranewithfullloadis eliminatedwithinthevalidusedloadchart.

Thecranemay not beusedfor:

–Attachingastuckloadforwhichtheweightandcenterofgravityarenotknownandwhichis releasedonlybyflamecutting,forexample.

–Lettingpersonsdrivealongoutsidethedriver'scab.

–Transportingpersonnelinthecranecabwhiledriving.

–Transportingpersonnelwiththeliftingequipmentandontheload.

–Transportingofpersonswithworkbaskets(cherrypickers),ifthenationalregulationsofthe responsibleworksafetyorganizationarenotobserved.

–Transportingloadsonthechassis.

–Twohookoperationwithoutauxiliaryequipment.

–Extendedmaterialhandlingoperation.

–Craneoperationonabargeiftheconditionsarenotdeterminedandthewrittenreleaseby LiebherrWerkEhingenGmbH isnotpresent.

Thecranedocumentationmustbereadandusedbyallpersonswhoareinvolvedinuse,operation, assemblyandmaintenanceofthecrane.

Safetysystems

Specialattentionmustbepaidtothesafetysystemsbuiltintothecrane.Thesafetysystemsmust constantlybecheckedforfunctionality.Thecranemaynotbeoperatedifthesafetysystemsarenot workingornotworkingcorrectly.

028189-06 0.01Foreword LIEBHERR 8 0.01

Note

Yourmottomustalwaysbe: Safetyfirst!

Thecranehasbeenbuiltinaccordancewiththeapplicablecraneoperationanddrivingregulations andhasbeenapprovedbytherelevantauthorities.

Equipmentandspareparts

WARNING

Dangertolifeiforiginalequipmentpartsare not used!

Ifthecraneisoperatedwithequipmentparts,whichare not original,thenthecranecanfailand causefatalaccidents!

Cranecomponentscanbedamaged!

Operatethecraneonlywithoriginalequipmentparts!

Craneoperationwithequipmentparts,whichdo not belongtothecraneisprohibited!

Ifthereisanydoubtabouttheoriginofequipmentparts,contactLiebherrService!

WARNING

Thecranepermitandthemanufacturer'swarrantywillbecomevoid!

Ifanyoriginalinstalledpartsaremodified,manipulatedorreplaced(e.g.removalofparts,installation ofnon-originalLiebherrparts),boththecranepermitandthemanufacturer'swarrantywillbecome void.

Leaveinstalledoriginalpartsunchanged!

Donotremoveinstalledoriginalparts!

UseonlyOriginalLiebherrspareparts!

Ifthereisanydoubtabouttheoriginofspareparts,contactLiebherrService!

Fororderingequipmentandspareparts,alwayskeepthecranenumberhandyandprovideit.

Definitionofdirectionaldataformobilecranes

Drivingforwards: Drivingwiththedriver'scabonthefront.

Drivinginreverse:Drivingwiththetaillightsofthecranechassisonthefront.

Front, rear, right, left inthe driver’scab refertothecranechassis.Thedriver’scabisalwaysinthe front.

Front, rear, right, left inthe craneoperator’scab refertothesuperstructure.Frontisalwaysin directionoftheplaceddownboom.

Definitionofdirectionaldataforcrawlercranes

Drivingforwards: Drivingforwardfromtheviewofthecraneoperatorseatedinthecranecab. Turntablein0°or180°position.

Drivinginreverse:Drivingbackwardfromtheviewofthecraneoperatorseatedinthecranecab. Turntablein0°or180°position.

Front, rear, right, left alwaysorientthemselvesonthe crawlertrack fromthepositionofthechain tensiondevices.Thechaintensiondevicesonthecrawlertrackarealwaysonthefront.

Front, rear, right, left refertothedirectionofviewofthecraneoperatorseatedinthe cranecab Frontisalwaysindirectionoftheplaceddownboom.

Optionalequipmentandfunctions

Theequipmentmarkedwith * andthefunctionsareoptionallyavailableandare not partofthe standardcrane(optionalequipment).

Conversionchart

Note

IfthecraneisusedincountrieswhereUS-unitsarecustomary,youcanusetheconversion factorsinthischartforconversionofmetricmeasuringunitsintoUS-units!

028189-06 0.01Foreword LIEBHERR 9 0.01

UnitofMeasureMultiplybyTooptain

Length millimeter(mm)0.03937inch(in) millimeter(mm)0.00328084foot(ft) meter(m)39.37inch(in) meter(m)3.28084foot(ft) meter(m)1.09361yard(yd) kilometer(km)0.62137mile(mi)

Area squarecentimeter(cm2 ) 0.155 squareinch(in2 ) squaremeter(m2 ) 10.7639 squarefoot(ft2 ) squaremeter(m2 ) 1.196 squareyard(yd2 ) squarekilometer(km2 ) 0.3861 squaremile(mi2 )

Volume cubiccentimeter(cm3 ) 0.06102 cubicinch(in3 ) cubicmeter(m3 ) 35.3147 cubicfoot(ft3 ) cubicmeter(m3 ) 1.308 cubicyard(yd3 ) liter(L)61.024cubicinch(in3 ) liter(L)0.035cubicfoot(ft3 ) liter(L)0.264gallon(U.S.)(gal)

Weight gram(g)0.03527ounce(oz) kilogram(kg)2.20462pound(lb) metricton(t)2204.62262pound(lb) metricton(t)1.102shorttons(U.S.)

Massdivided kilogrampermeter(kg/m)0.055998poundperinch(lb/in) bylength kilogrampermeter(kg/m)0.67197poundperfoot(lb/ft)

Force newton(N)0.2248pound-force(lbf) kilonewton(kN)224.809pound-force(lbf) kilonewton(kN)0.2248kip(1kip=1000lbf)

Torque newtonmeter(N·m)8.85075pound-forceinch(lbf·in) newtonmeter(N·m)0.73756pound-forcefoot(lbf·in)

Power horsepower(metric)0.73549kilowatt(kW) horsepower(metric)0.98632horsepower(U.K.) kilowatt(kW)1.34102horsepower(U.K.)

Pressure kilopascal(kPa)0.01bar(bar) kilopascal(kPa)0.1450377pound-forcepersquareinch(psi) bar(bar)14.50377pound-forcepersquareinch(psi) newtonpersquarecentimeter(N/cm²)1.450377pound-forcepersquareinch(psi) newtonpersquaremeter(N/m²)0.0001450377pound-forcepersquareinch(psi)

Speed meterpersecond(m/s)39.37inchpersecond(in/s) meterpersecond(m/s)3.28084footpersecond(ft/s) kilometerperhour(km/h)0.62137mileperhour(mi/h)

028189-06 0.01Foreword
LIEBHERR 10 0.01

UnitofMeasureMultiplybyTooptain

literperminute(l/min)0.26417gallonperminute(gal/min)

Temperature degreeCelsius(°C)([°C]·1.8)+32degreeFahrenheit(°F) kelvin(K)([K]·1.8)-459.67degreeFahrenheit(°F)

Conversionchartversion1

028189-06 0.01Foreword
LIEBHERR 11 0.01
Contents LIEBHERR 12
Contents LIEBHERR 13 Contents 1Descriptionofcrane 25 1.01Terminology 26 1Cranecomponents 27 2Auxiliaryboom 29 1.02Productdescription 30 1Cranechassis 31 2Cranesuperstructure 32 3Auxiliaryequipment 33 1.03Technicaldata 35 1Dimensions 37 2Support 37 3Tires 38 4Weights 38 5Workplace-relatedemissionvalue 38 6Vibrations 39 7Speeds 39 8Ropediameter 40 9Liftingheights 40 2Safety 45 2.01Trafficregulations 46 1Trafficregulations 47 2.01.10Generaltrafficregulations 48 1Generaltrafficregulations 49 2.01.20Nationaltrafficregulations 51 1Nationaltrafficregulations 53 2.02Break-ininstructions 54 1Break-ininstructions 55 2.03Jobplanning 56 1Planningcraneoperation 57
Contents LIEBHERR 14 2.04Generalsafetytechnicalguidelines 58 1General 59 2Emergencyexit 67 3Checkingtheriggingandfasteningpoints 71 4Personalprotectiveequipment 73 5Useofsingle-strandedheightsafetyequipment,illustration1 79 6Useofdouble-strandedheightsafetyequipment,illustration2 79 7Securingtheassemblypersonnelagainstfalling 79 8Rescuingtheassemblypersonnel 81 9Documentation 81 10Identification 81 11Craneoperatorresponsibilities 81 12Selectingthelocation,illustrations1to3 87 13Slopesandexcavations,illustrations4and5 90 14Permissiblegroundpressures 90 15Support 93 16Checkingthesafetymeasures 95 17Endangeringairtraffic 95 18Grounding 96 19Considerationofwindconditions 96 20Workinginthevicinityoftransmitters 107 21Dangerswhenworkingtogetherwithseveralcranes 109 22Handsignalsforguidance 110 23Craneoperationwithaload 118 24Liftingofpersonnel 121 25Craneoperationincaseofthunderstorms 122 26Safetynotesforexternalpowerfeed(100VACto400VAC) 122 27Weldingworkontheload 123 28Interruptionofcraneoperation. 124 29Resumptionofcraneoperation 125 30Endingcraneoperation 125 31Turning/drivinginreverse 126 32Parkingthevehicle 126 33Safetyguidelinesforladders 129
Contents LIEBHERR 15 2.05Signsonthecrane
1Signs
2.05.10Labelingofloadliftingequipment
1Identificationsonthehookblockorloadhooks
2Identificationsonsinglehookordoublehook
3Identificationsonauxiliaryweights
2.06Antifallguardsonthecrane 173 1Personalprotectiveequipment
2Preparingtheladder 177 3Attachmentandfasteningpoints
4Railingsonthecranesuperstructure
2.07Accesstothecrane
1Componentsonthecrane
2Ascentanddescentonthecranechassis
3Walkingandsteppingsurfaces
2.08Workinginlowtemperatures
1Workinginlowtemperatures
2Workinginambienttemperaturesupto-40°C
3Workinginambienttemperaturesbelow-40°C
2.10Generalsafetytechnicalnotesfordrivingwithdolly 211 1Traveloperationwithdolly 213 3Cranechassisoperation 223 3.01Operatingandcontrolinstrumentsonthecranechassis 224 1Operatingandmonitoringelements 225 2Camera-monitor* 229 3Triprecorder* 231 4Keyboard 233 5Displayunit 237 3.02Beforestartingtotravel 244 1Generalchecksbeforestartingtotravel 245 2Workstation-Driver'scab 253 3.03Axlesuspensionsystem 262 1Cranevehicleaxlessuspended 263
136
137
167
169
170
171
175
179
183
184
185
189
199
200
201
201
209
Contents LIEBHERR 16 2Cranevehicleaxlesblocked
3Levelregulation
3.04Traveloperation 282 1Drivingconfigurationsofthecrane 283 2Startingandstoppingtheengine 287 3Drivingthecranevehicle 293 4Creepergear(off-roadgear/maneuveringortaxiingmode) 331 5Differentiallocks 337 6Steering 343 3.05Craneatthejobsite 350 1General 351 2Bluetooth™Terminal(BTT) 359 3Supportingfromthecraneoperator'scab 395 4Beforeleavingthejobsite 415 3.07Towingthecrane 416 1Towing 417 3.80Transportofcraneandcranecomponents 418 1Transportingthecrane 419 4Operationofcranesuperstructure 427 4.01Operatingandcontrolinstrumentsonthecranesuperstructure 428 1Operatingandcontrolinstruments 429 2Operatingelementsoncamera-monitor* 433 3Operatingelementsoncontrolconsoles 435 4Operatingelementsontheoperatingandcontrolunit(BKE) 463 4.02LICCONcomputersystem 470 1General 471 2LICCONcomputersystembootup 473 3OperatingelementsoftheLICCONcomputersystem 475 4“Setup”program 479 5“Craneoperation”program 497 6“Telescoping”program 561 7The“Workingrangelimitation”program* 565 8The“Supportforcemonitoring”program* 567
267
271

9Thesettingswindow“Speedreductionmasterswitch” 575 10Power-SaveandStand-bymodeintheLICCONcomputersystem 583 4.03Cranestartupandtakingthecraneoutofservice 588 1Checksbeforestartup 589 2Workstation-Craneoperator'scab 595 3PreheatingthehydraulicoilwiththeHydraulicoilpreheating* 613 4Startingtheenginesfromthecraneoperator'scab 617 5Engineregulationfromthecranedriver'scab 629 6Detaching/attachingthehookblockonthefasteningpoint 633 7LICCONcomputersystemafterenginestart 645 4.04Safetyequipment 648 1General 649 2QuicktestCranegeometry 649 3QuicktestOverloadprotection 649 4LICCONcomputersystem 650 5Safetydevicesonthecrane 655 4.05Craneoperation 666 1General 667 2LICCONcomputersystem 673 3Luffing 675 4Lifting/lowering 681 5Turning 687 6Telescoping 699 4.06Ropereeving 726 1Wireropesandropeendconnections 727 2Reevingthehoistropewiththeauxiliaryreevingrope 729 3Reevingthehookblockinandout 733 4Securingandremovingtheloadhook* 739 5Attaching/removingthehoistlimitswitchweight 743 6Assembling/disassemblingthewedgelock 747 7Craneoperationwithauxiliaryblock*onthetelescopicboom 749 8Ropereeving 749 4.07Counterweight 750 1General 751

Contents LIEBHERR 17
Contents LIEBHERR 18 2Assembly 757 3Disassemblyofthecounterweightplates 763 4.08Workingwithaload 770 1Safetytechnicalinstructionsforworkingwithaload 771 2Checksbeforestartingtoworkwiththecrane 772 3Cranemovement-Telescoping 773 4Takingonaload 775 5Craneoperation 781 4.15Reevingplans 783 1Reevingplans 785 4.20Procedureforshutoffofcranemovements 802 1General 803 2Instructionstoresumethecranemovement 819 5Equipment 859 5.01Safetytechnicalnotesforassemblyanddisassembly 860 1Checkingtheretainingelements 861 2Ropepulleys 861 3Checkingtheropes 861 4Controlmeasures 862 5Dangerousconditionswithoutshutoff 864 6Transportingcomponents 865 7Pneumaticspringsforassemblysupportofcomponents 865 8Manualropewinchesforassemblysupportofcomponents 865 9Weights 866 10Guyrods 866 11Auxiliaryguying 867 12Bypassingtheoverloadprotection 867 13Bypassingthehoisttopshutoff 869 14Assembly/disassembly 871 15Erection/takedown 908 5.02Foldingjib-TK 910 1General 911 2Assemblingthefoldingjib 925

3Reevinginthehoistrope 955

4Changingovermechanicalfoldingjibfrom0°to22.5°or45° 957

5Hydraulicconnections 969

6Electricalconnections 977

7Erection 985

8Adjustingthefoldingjibanglehydraulically* 987

9Changingovermechanicalfoldingjibfrom22.5°or45°to0° 989

10Unreevingthehoistrope 997

11Removingthefoldingjib 999

5.09Winch2 1022

1General 1023

2Assembly 1023 3Disassembly 1025

5.10Boomnose 1026

1General 1027 2Assembly 1029 3Disassembly 1035

5.12Auxiliaryboom 1040

1General 1041

2Assemblingtheauxiliaryboom 1045

3Reevinginthehoistrope 1069

4Changingthemechanicalauxiliaryboomfrom0°to22.5°or45° 1071

5Hydraulicconnections 1077

6Electricalconnections 1079

7Erection 1083

8Adjustingtheauxiliaryboomanglehydraulically* 1085

9Changingthemechanicalauxiliaryboomfrom22.5°or45°to0° 1087

10Unreevingthehoistrope 1091

11Disassemblingtheauxiliaryboom 1093

5.14Telescopicboomdisassembly/assembly,luffingcylinderonthecrane superstructure 1114

1General 1115

2Removaloftelescopicboom 1115

3Installationoftelescopicboom 1127

Contents LIEBHERR 19
Contents LIEBHERR 20
2Procedureincaseofslackrope
3Hookblockoverview
4Transportingthehookblock/loadhook
5Installingthesingleblocks
6Removingthesingleblocks
5.25Telescopicboomextension
1General
2Assembly
3Establishingtheelectrical/hydraulicconnections
4Erection
5Disassembly
5.31Bluetooth™Terminal(BTT)
1Display/operatingelementBluetooth™Terminal
2TheBluetooth™Terminal(BTT)ispluggedintotheinstrumentconsole
3TheBluetooth™Terminal(BTT)removedfromitschargingcradle
4OperationoftheBluetooth™Terminal(BTT)
6Additionalequipment
6.01Heater/enginepreheating/AirconditioningsystemDriver’scab
1Heatingthedriver'scab
2Maintainingtheengineindependentheater
6.02Heater/enginepreheating/AirconditioningsystemCraneoperator’scab
1Heatingthecraneoperator'scab
2Menu“Climatecontrolsettings”
3Maintainingtheengineindependentheater
6.04Supportbeammonitoring/slidingbeammonitoring
This is the cut pages sample. Download all 1662 page(s) at: ManualPlace.com
5.17Slidingbeamdisassembly/assembly 1138 1General 1139 2Removeslidingbeamswithauxiliarycrane* 1141 3Removingtherearslidingbeamswithowncrane* 1143 4Installingtheslidingbeamswiththeauxiliarycrane* 1151 5Installingtherearslidingbeamswithowncrane* 1153 5.19Hookblocks 1159 1Minimumrequiredhookblockweight 1161
1164
1167
1169
1171
1175
1178
1179
1181
1183
1183
1185
1188
1189
1203
1209
1243
1249
1250
1251
1273
1275
1277
1277
1311
1313 Liebherrr Mobile Crane Ltm 1200 5 1 Operating Instruction Full download: http://manualplace.com/download/liebherrr-mobile-crane-ltm-1200-5-1-operating-instruction/

Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.