机械阀弹簧，每分钟转数可以轻松达到 11,000 rpm。使用普通汽油的汽车不可能达到 F1 赛车的 18,000 rpm；另一方面，Project One 必须要和其他梅赛德斯汽车一样可靠耐用。 驱动汽车前轴的电动机绝对是最先进的 配置，可令汽车转速高达 50,000 rpm，比市场 上的任何汽车都高出 30,000 rpm。发动机能有 这么高的转速还要归功于另外一个高科技涡 轮增压器。为了释放最大的动力，废气涡轮 和 压 气 涡 轮 被 分 离 ，由 一 个 配 有 电 动 机 的 传动轴连接，电动机输出电力约 90 千万，按 照 驾 驶 模 式 ，甚 至 可 以 把 压 气 涡 轮 转 速 提 升 到 100,000 rpm。 F1 指 定 这 一 配 置 采 用 热 能电机（MGU-H）。
least as fast as the C11 and boasts 270 horse power more. However, the Project One is more about its drive system than anything else. It was developed by the same AMG High Performance Powertrains engineers that created Lewis Hamilton’s car, at the F1’s factory located in Brixworth, England. It is, put simply, the most advanced propulsion system ever seen in a road car, comprising one hybrid, turbocharged combustion engine and a total of four electric motors. One electric motor has been integrated into the turbocharger, another has been installed directly on
the combustion engine with a link to the crankcase and the two remaining motors drive the front wheels. The complexity is unlike anything ever seen before in a car anyone can drive to the supermarket. Because Formula 1 rules dictate a displacement of just 1.6 litres, the engine needs a lot of other ways to find power. Therefore, it was fitted with direct injection and electrically assisted single turbocharging. To achieve high engine speeds, the mechanical valve springs have been replaced by pneumatic valve springs and it can easily reach speeds of 11,000 rpm. The 18,000 rpm the F1 car makes would be impossible to
澳门精华 | 2017年 12月- 2018年 1月 | 45