Puresample v4

Words from the President

Dear Friends,

Let’s begin with a little history……

As early as 4000 BC, ancient civilizations began to realize the importance of drinking and using clean water. They also realized that the fires they used for cooking and heating left the air so dense, intolerable and polluted. In essence, they began using their senses of sight, smell, and taste to analyze the water and air, and try to develop viable filtering and treatment systems. For example, they began to boil water and filter water by using sand and gravel. These processes are still used today.

As time flowed throughout the centuries, significant contributions had been made in the area of treatment technologies, focusing primarily on waterborne illness as a means of public protection. With the dawn of the industrial revolution, people no longer had to rely on their senses to assess the quality of the environment. Instead, environmental tools were developed; samplers, monitors, and analyzers that gave clean, accurate results, results that could not be seen with the naked eye. With the results obtained, people could actually assess what treatment technology could be used.

Since 1994, ERE Inc. has been creating a little history of its own by supplying, designing and manufacturing innovative environmental equipment required to SAMPLE, MONITOR, FILTER and REMEDIATE, air, water, liquids, powders, sludge, and soil. With our new PURESAMPLETM Catalogue, volume 4, our goal is to provide you with the ultimate sourcebook to help you make your job a little easier.

It is most certain that technology will continue to evolve in the 21st century and rest assured that ERE will continue to provide you with the very best and ultimate in customer care.

Sincerely,

Angelo Diadelfo President & CEO

Table of Contents

Pumps, Biological Samplers, Bags, Cassettes, Tubes

Air Monitoring

4 - 12

Powder & Solid Sampling

Powder Thief, Slot Samplers, Bag Samplers, Sleeve Samplers, Cohesive Samplers, Powder Lances, Spatulas, Scoops, Spoons, Funnels, Jugs, Whirl-Pak Sampling Bags, Trays, Pails, Mini Pots, Brushes, Accessories, Carrying Cases, Labels, Cleaning Detergents

13 - 33

Passive Monitoring Badges, Gas Detection Tubes & Pumps, Portable & Fixed Gas Detectors, Particle Counters, Calibration Gases, Accessories

Soil Sampling

Augers, Handles, Extensions & Slide Hammers, Auger Kits, Core Samplers, Soil Probes, Soil Sampling Kits Soil Gas Sampling Kits, Scoops, Shovels, Drills &

Heat Stress Monitors & Sound Level Meters, Calibrators, Light Meter & Flow Meter, Handheld Weather Meters, Thermometers, Hygro-Thermometers, Moisture Meter, Borescope Camera, MultiMeters, Indoor Air Quality Meters, Stop Watch, RF EMF Strength Meter, Surface Test Kits, Magnetic Locators, Radiation Meters

Water

49 - 72

Bailers, Accessories, Surface Samplers, Liquid Samplers, Drum & Tank Samplers, Inertial Pumps & Tubing, Groundwater Filters, Actuators, Pumps

Stopwatches, Resistance Testers, Multimeters, Well Plugs, Sampling Bags, Accessories, Bottles, Containers, Syringes, All Weather Field Books, Gloves, Cleaners, Flash Lights, Protective Cases, Tubing, Adapters, & Connectors

Flow Meters, Staff Gauges, Water Level, Oil Water Interface Meters, Test Kits, Bacteria Test Kits, Luminometers, Dye Tracing, Water Quality Instrumentation, Fixed Water Quality Controllers

Biodegradable Cleaners, Air Fresheners, Mops, Sprayers, Dust Removers, Towels, Wastebaskets, Bags, Paper Towels, Hygienic Paper, Dispensers, Absorbents, Spill Kits, Cylinder Racks, Overpacks, Workstations, Spill Pallets, Leak Diverters & Drain Plugs

Water Quality Meters, Colorimeters, Electrodes, Calibration Solutions, Stirrers, Refractometers, Water Purification Systems, Microscopes, Slides, Centrifuges, Tubes, Incubators, Digital Dry Baths, Shakers, Scales & Balances, Tensiometer, Sieves & Shakers, Desiccators, Pipettors, Syringes, Burettes, Containers, Bottles, Vials, Bags, Cylinders, Beakers, Trays, Pails, Funnels, Scoops, Tube Racks, Biohazard Bags, Tape, Boxes, Tubing Clamps, Glove Boxes, Surface Protectors, Sleeves, Shoe Covers, Caps & Detergents

Hydrocarbon Sampling & Recovery166 - 168

Skimmers, Samplers, Pumps, Absorbents, TPH Test Kits

Gloves, Aprons, Sleeves, Cova-Caps, Shoe Covers, Rainsuits, Protective Clothing, Traffic Vests, Goggles, Glasses, Ear Muffs, Ear Plugs, Masks, Eye Wash Stations, Hard Hats, Harness, First Aid Kits, Traffics Cones & Horns

Books, Books, Books … & More Books

Sludge & Grease Samplers, Sludge & Sediment Sampler Kits, Dredges, Sludge Level Detector & Settleometer

Filter Bags, Cartridges, Bag & Cartridge Housings, Carbon, Media, Resins, Water Treatment Units, Fiber Glass Tanks, Sludge Dewatering Systems, Micro Filtration Systems, Reverse Osmosis Units, Oil Water Separators, Pumps, Refractometers, Bacteria, Oxygen Releasing Compounds, Algae Remover, Skimmers, Water Softner, Remediation Pumps, Multiphase Extraction Systems, Air Strippers, Blowers, Soil Vapour Extraction Systems, Air Treatment Units, Air Filters

Simple & Reliable!

The Buck EliteTM -5

The BUCK Elite™-5 is a data logging, programmable personal air sampler consists of a pump contained in a high impact steel fiber filled Lexan, antistatic, and RFI/EMI - shielded case, exclusive electronic circuit board for constant flow control (patent pending), an LCD display with 2 lines of 16 characters, a single diaphragm pump mechanism and a rechargeable NiMH battery pack. The purpose of this pump is to draw air contaminants in through a sampling media such as 25 and 37 mm filter cassettes, bubble impingers, long-duration color detector tubes; to gauge personnel exposure to gases, vapors, particulates, aerosols, etc.

Flow Range: 0.8 - 6 LPM (800 - 6000 cc/min) 5 - 799 cc/min with universal low flow holder.

* Pump kit includes pump with a single pack NiMH battery, standard 120 V AC battery charger, luer hose adapter, shirt/hose clip, 3 ft of vinyl hose and operating manual.

The Libra Plus™ Series Air Sampling Pumps

Libra Plus™, provides extraordinary backpressure capabilities in an economical full service pump with a broad sampling range for use in a multitude of sampling applications.

The pump is contained in a high impact RFI/EMI shielded case with an exclusive electronic circuit board for Constant Flow Control, voltage & backpressure monitoring to provide the most powerful, accurate, battery powered pump on the market.

A large backlit LCD display, single diaphragm pump mechanism & nickel metal hydride battery pack make this pump simple to use, reliable and rugged for use with sampling media such as 25 & 37 mm filter cassettes, cyclones, bubble impingers, long-duration color detector tubes & other media for sampling gases, vapors, aerosols, particulates, etc.

Features

• High Back Pressure capable for 25 mm 0.45 µ asbestos filters

• Displays: elapsed time, accumulated volume and flow rate

LP-5 Pump: 0.8 - 5 LPM

LP-7 Pump: 3 - 7 LPM

LP-12 Pump: 3 - 12 LPM

LP-20 Pump: 5 - 20 LPM

Includes pump with battery pack, standard charger, Luer hose adapter, shirt/hose clip, 3 ft vinyl hose & operating manual. Does not include universal low flow holder for sorbent tubes.

BU-906200

Libra Plus™, LP-5 Pump Kit, 0.8 - 5 LPM (120 V)

BU-906300

Libra Plus™, LP-7 Pump Kit, 3 - 7 LPM (120 V)

BU-906250

Libra Plus™, LP-12 Pump Kit, 3 - 12 LPM (120 V)

BU-906700

Libra Plus™, LP-20 Pump Kit, 5 - 20 LPM (120 V)

BU-109030

Adjustable Universal Low Flow Holder

** Pump 5-pack kit includes 5 pumps with single pack NiMH batteries, luer hose adapter, shirt/hose clip, and 3 ft of vinyl hose. Also included are two operating manuals, one QuickFive™ charger100 - 240 V AC, and a durable hard plastic 1500 Pelican case with lifetime warranty that accommodates additional accessories.

BU-908000

Buck EliteTM -5, Single Pack Pump Kit W/ 120 V Wall Charger

BU-908020

Buck EliteTM -5, Single Pack Pump Kit W/ 230 V Wall Charger

BU-947200

Buck EliteTM -5, 5 Pack Pump Kit W/ QuickFive Charger & Pelican Case

The Buck LibraTM

Features

•Economical Abatement Pump Flow Range 0.8 to 4 LPM

•Designed for asbestos, lead and other airborne contaminants

•No tools required to change flow rates

•High back pressure capability for 25 mm 0.45 µ asbestos filters

•Flow setting is saved in memory for next day quick start

•Antistatic, RFI shielded & ETL approval Class I, II, III

•Low flows 5 - 800 cc/min with universal low flow sorbent tube holder

•Flows up to 4 LPM for special cyclone requirements

•Bright LED indicates pump on, flow fault & low battery Includes pump with battery pack, 115 V charger, luer hose adapter, shirt/hose clip, 3 ft vinyl hose and operating manual. Does not include universal low flow holder for sorbent tubes.

4

BU-926000 Buck-Libra

LPM Pump Kit (120 V) BU-926020 Buck-Libra 4 LPM Pump Kit (230 V)

DEFENDER Primary Standard Calibrator

Designed exclusively for the occupational health and safety industry and built on next-generation DryCal® technology!

Features

•Highly accurate and repeatable - laboratory accuracy certified by NIST through NVLAP and backed by ISO 17025 accreditation

•Choice of 3 wide flow ranges:

5 - 500 ml/min

50 - 5,000 ml/min

300 - 30,000 ml/min

•Large illuminated graphical display with zoom feature

•Integrated serial PC interface and Optimizer Software for data transfer, secure audit trail, and reporting

•Optimizer 110 Software (included) provides a link to your PC and automatically transfers readings to be saved as a text file

•"Optional"Optimizer 120 Software accessory stores readings in a secure and searchable SQL database for quick and easy recall. Document and aggregate pump pre- and post-calibration data. Create calibration reports from templates for a secure audit trail and to satisfy ISO, TQM, or occupational health and safety management systems.

Two DEFENDER models available:

DEFENDER 510: 1% accuracy volumetric calibration for personal air samplers and other volumetric instruments

DEFENDER 520: Adds ambient temperature and pressure sensors to record calibration conditions for enhanced audit trail.

The First Electronic Calibrator

Mini-BuckTM Primary Flow Calibrator

Accurate dependable flow measurements!

M-1

0.1 - 300 cc/min

M-5

1 - 6,000 cc/min

M-30

Features

0.1 - 30 LPM

All calibrators include AC adapter/charger, soap solution, dispenser bottle & operating manual.

•Primary gas flow measurements, NIST traceable with accuracy of ±0.5%

•Suitable for verifying vacuum and pressure pumps, rotameters, setting instrument panels, calibrating gas chromatographs, etc.

•Wide choice of operating ranges

•Completely field portable, rechargeable Ni-Cad battery powered provides up to 8 hours of use

•One button control, auto shut off battery saver

•Instant readout of flow rates

•Not affected by temperature or humidity changes, accurate at any altitude

BU-801000

Mini-Buck Calibrator, M-1, 0.1 - 300 cc/min, 120 V CE*

BU-805000

Mini-Buck Calibrator, M-5, 1 - 6,000 cc/min, 120 V CE*

BU-803000

Mini-Buck Calibrator, M-30, 0.1 - 30 LPM, 120 V CE*

BU-107030

Soap Solution, 8 oz

All Defender instruments come with charger with multi-plug, Optimizer 110 Software, and 1 meter serial cable.

50 - 5,000 ml/min. Software requires available COM port on PC. (100 - 240 V)

BIO-200-510L

Defender Model 510L, 5 - 500 ml/min

BIO-200-510M

Defender Model 510M, 50 - 5,000 ml/min

BIO-200-510H

Defender Model 510H, 300 - 30,000 ml/min

BIO-200-520L

Defender Model 520L, 5 - 500 ml/min

BIO-200-520M

Defender Model 520M, 50 - 5,000 ml/min

BIO-200-520H

Defender Model 520H, 300 - 30,000 ml/min

BIO-300-002

Optimizer 120 Deluxe Software On CD, Requires Windows 2000 SP3 Or Windows XP SP2 & An Available COM Port On PC

Pump Accessories

BU-603900

Single Station Charger, 16 hrs, 120 V

BU-601900

FastOne 1 hr Charger, Single Station, 100/240 V

BU-605900

FastFive 1 hr Charger, 5 Station, 120/240 V

BU-109030

Adjustable Universal Low Flow For Sorbent Tubes, 5 - 800 cc/min

BU-109032

Non-Adjustable Low Flow Holder For Sorbent Tubes

BU-109033

Adjustable Low Flow Holder, 5 - 100 cc/min

BU-109070

Optional Bag Filling Port For Buck Pumps

BU-108000

Small Pelican 1400 Padded Carrying Case

BU-109017

Medium Padded Carrying Case

Sampling for Gel-Impaction Slides

Buck BioSlideTM

Model B1020 Bioaerosol sampling pump is compact, lightweight, 10 - 20 LPM controlled flow sampling pump for bioaerosol sampling with Impaction-Gel. Both an LED & audible alarm provide confirmation of end-of-sample or depleted battery. Convenient timer for 1, 2, 5, 10 minute samples & continuous mode. A full five hours of continuous operation (at 15 LPM). It comes with a calibrated rotameter for quick flow check or calibration and a charger.

Buck BioAireTM

Model B520 Bioaerosol sampling pump is compact, lightweight, 5 - 20 LPM controlled flow sampling pump for bioaerosol sampling. Accommodates the BioAireTM cassettes as well as the Air-O-CellTM. Both a LED & audible alarm provide confirmation of end-of-sample or depleted battery. Convenient timer for 1, 2, 5, 10 minute samples & continuous mode. A full five hours of continuous operation (at 15 LPM). It comes with a calibrated

for quick flow check or calibration & charger.

Buck Bio-Culture™

The Bio-Culture™ provides selectable, continuous (6 to 8 hrs), constant sample flowrate and is simple to operate. Its quiet operation allows unobtrusive sampling in IAQ, medical, clean room, public & residential building applications.

Features

• Holds 90 mm agar Petri dish.

• Flows up to 120 LPM

• 380 holes - 1 mm diameter

• Convenient timer for 1, 2, 5,10 minute samples & continuous mode.

• Tripod mount to allow 90 degree sampling

• Sampling head is easily sterilized with gas torch or autoclave

• 4 times the flow rate of an Anderson sampler

BU-706000 BioAire™ Pump Comes W/ 115 V Charger, Rotameter Assembly & Instruction Manual

BU-707000 BioSlide™ Pump Comes W/ 115 V Charger, Rotameter, Assembly & Instruction Manual

BU-708000 Bio-Culture™ Pump Comes W/ 115 V Charger, Pencil Torch, Tripod, Case & Instruction Manual BU-708500 Calibration Head For Bio-Culture™ Pump

rotameter

Sampling for Viable Bioaerosols

MicroFlowTM MicrobiologicalAir Sampler

Is used for sampling biocontaminants (bacteria, molds, spores, fungi, pollen, etc.) in any production or environmentally controlled area. MicroFlowTM allows to verify & quantify microorganism presence.

Features

•Autoclavable anodized aluminum support plate & aluminum sampling head with conical holes;

60 mm head: 219 holes (1 mm)

90 mm head: 380 holes (1 mm)

•Manual, sequential, or programmable with delayed start

Gas Sampling Bags

•Five flow rates 30, 60, 90, 100, 120 LPM

•Data logging up to 99 samples

•Remote operation via infrared control

•Sample in horizontal or vertical without tripod auxilium

•5 languages: English, Spanish, German, French & Italian

Non-contaminating, chemically inert, EPA recommended

Reusing bags

The EPA does not recommend reusing sample bags for ambient air sampling, due to the possibility of adsorption of previously sampled chemicals onto the inside bag surface. In some cases, bags can be reused, with the following guidelines.

•Immediately after use, clean bags by flushing and heating, then store with all air evacuated from the bag.

•Long-term storage of air-contaminant mixtures in bags can cause subsequent samples to be contaminated by off-gassing of previous samples adsorbed into the film.

•Tedlar® bags can be used for higher MW alcohols without contaminating subsequent samples if cleaned and flushed properly.

•Properly cleaned bags can be reused for sampling ethers without interfering with subsequent analysis.

•Tedlar® bags used for sampling styrene or ethylbenzene cannot be reused. Cleaning and flushing will not completely remove these chemicals.

AQ-G1004

MicroFlow™ 60/C Sampler Kit Includes Aluminum Head & Double IR Sensor, Audible Alarm, One Spare Aluminum Head, IR Remote Control,

Hints

•Before use, thoroughly flush bags with purified air or nitrogen.

•During sampling, Teflon® tubing and Teflon® lined septums must be used in order to prevent sample loss.

•Bags should not be filled to more than 80% of their maximum volume.

•Charcoal (Black) Tedlar® bags should be used when sampling any light sensitive elements.

•Do not store compounds in Tedlar® bags long term due to the possibility that chemicals may adsorb onto the bag surface.

•Bags should not be used to collect reactive or unstable compounds.

•When shipping bags, do not air-ship unless the cabin is pressurized.

Polypropylene Screw Cap Combo Valve with Replaceable Septum

Polypropylene Locking Combo Valve with Septum

Stainless Steel TCLP Fitting with Replaceable Septum

Stainless Steel Combo Valve with Replaceable Septum

Polypropylene Jaco® Fitting for Tubing or Septum

Nickel Plated HR® Barbed On/Off Valve

Swagelok® Type Stainless Steel Fitting for Tubing or Septum

PFA Fitting for Tubing or Septum

Gas Sampling Bags

These Gas Sampling Bags offer a convenient, reliable, economical way of collecting airborne chemical hazards. They are chemically inert, leak tested, mechanically strong, reusable, and noncontaminating. They are available in Tedlar®, Charcoal Tedlar®, FEP, PFA and other materials, with a variety of standard and custom fittings as well as optional metal grommets/eyelets for easy holding and storage.

Tedlar® Gas Sampling Bag with Screw Cap Combo Valve with Replaceable Septum

Above part numbers include 1 grommet / eyelet. Also available with multiple grommet / eyelet. Other valves & fittings available. Can also be sold separately.

Teflon® FEP Gas Sampling Bag with Screw Cap Combo Valve with Replaceable Septum

Common Applications

• Assessing exposure from spills and leaks

• Calibrating gas standards

• Gas blending

• Grab sampling

• Magnetic imaging

• Groundwater testing

• Measuring peak concentrations

• Indoor air sampling

• Vent sampling

• Soil gas sampling

• Hazardous waste site sampling

Above part numbers include 1 grommet / eyelet. Also available with multiple grommet / eyelet. Other valves & fittings available. Can also be sold separately.

SampleProTM FlexFilm Bags

The new SKC SampleProTM FlexFilm sample bags are constructed of SKC proprietary material ideally suited for collecting air samples. Eyelets are not included.

SamplePro® FlexFoil® Sample Bags For Methane, Carbon Monoxide/Dioxide & More

SKC SamplePro® FlexFoil® sample bags provide light and moisture protection for low molecular weight compounds such as hydrogen that are unstable when collected into standard Tedlar® bags. Use a low flow air sample pump with exhaust port with SKC FlexFoil® Sample Bags. These bags do not have eyelets.

The FlexFilm Advantages

•Lower VOC background and shows the same sample stability for VOC’s as seen with Tedlar®

•High-performance polypropylene fitting designed for efficient bag sampling

•One compact fitting includes hose/valve and septum

•Longer storage times

•Strong evenly-sealed seams

• Economy, economy, economy

SampleProTM FlexFilm Bags with Single Polypropylene Septum Fitting

SK-236-001

1 Liter, 8.25" x 7.25", 10/Box

SK-236-001A

1 Liter, 8.25"x 7.25", Each

SK-236-002

3 Liter, 8.25"x 15.25", 10/Box

SK-236-002A

3 Liter, 8.25"x 15.25", Each

SK-236-003 10 Liter, 18.25"x 14.25", 10/Box

SK-232-01-RS

Replacement Septa, 10/Box

Custom size bags available upon request.

The FlexFoil® Advantages

•Collect low molecular weight compounds and inert gases not stable in Tedlar

•Strong, evenly sealed 4-ply material

•Water and vapor-proof

•Flexible

•Sample stability up to 5 days

•Available with single all-in-one septum and hose/valve fitting in stainless steel or polypropylene

•Custom bags available

•Minimal adsorption

•Opaque material protects sample from light

SamplePro® FlexFoil® Bags* with Single Polypropylene Septum Fitting

SK-245-21

1 Liter, 7" x 7", 5/Box

SK-245-21A

1 Liter, 7"x 7", Each

SK-245-23

3 Liter, 9.5"x 10", 5/Box

SK-245-23A

3 Liter, 9.5"x 10", Each

SK-245-25

5 Liter, 12"x 12.5", 5/Box

SK-245-28

10 Liter, 11.75"x 22", 5/Box

SK-232-01-RS

Replacement Septa, 10/Box

Custom size bags available upon request.

SamplePro® FlexFoil® Bags* with Single Stainless Septum Fitting

SK-245-01

1 Liter, 7" x 7", 5/Box

SK-245-01A

1 Liter, 7" x 7", Each

SK-245-03

3 Liter, 9.5" x 10", 5/Box

SK-245-03A

3 Liter, 9.5" x 10", Each

SK-245-05

5 Liter, 12" x 12.5", 5/Box

SK-245-08

10 Liter, 11.75" x 22", 5/Box

SK-233-01-RS

Replacement Septa, 10/Box

Custom size bags available upon request.

* Flexfoil® sample bags are not suitable for collecting VOC’s due to the constituents of the bag material.

Extremely Low Permeability!

Air Sampling Bags

Air Sampling Bags are made from Tedlar polyvinyl fluoride (PVF) film with heat-sealed, leak-proof, double seams. Tedlar is chemically inert and will not absorb or contaminate the samples normally encountered in air monitoring, emission testing and nuclear gas collecting. Minimum sample loss.

Features

•Use to collect and store many gases

•Flexible and easy to use

•Lightweight, reusable, strong

•Bags are supplied with standard port, pinch clamp and 30 cm (11.8") of 19 mm (1/4") ID

Tygon® Tubing

37 mm Air Sampling Cassettes

Features

•Polystyrene Housing, 2 or 3

•Meets NIOSH & OSHA standards

•Available in both two & three piece configurations

•Individually assembled & preloaded under stringent quality assurance standards with only the finest quality membrane & support pads

ZEFON & EMS 25 mm PCM & TEM Cassettes

Features

•25 mm static conductive extension cowl, 3 piece housing

•Meets NIOSH and OSHA standards

•Ready to use, tapered inlet

•Compliant with asbestos regulations

ZEFON

MI-10-005A 0.5 Liter, 6"X 7", Each

MI-10-001A

1 Liter, 7"X 9", Each

MI-10-002A

2 Liter, 9" X 12", Each

MI-10-003A

3 Liter, 12" X12", Each

MI-10-005A

5 Liter, 9" X 22", Each

MI-10-010A

10 Liter, 12" X 22", Each

MI-10-015A

15 Liter, 18" X 18", Each

MI-10-020A

20 Liter, 18" X 25", Each

Larger sizes available.

Match-Weighed Cassettes

Features

•Each cassette labeled with serial number, preloaded-ready to use

•Color coded to indicate filter type

•Contains two filters matched in weight, subject to noted tolerance

•Top filter collects particulate & the bottom filter serves as a control

ZE-7M93M

ZE-7M52P

ZE-7M53P

Filters, 50/Case

ZE-Z045BA

Pre-Weighed Cassettes

Features

•Preloaded- ready to use, 2 or 3 housing

•Each cassette is labeled with serial number, color coded to indicate filter type

•Pre-weighed cassettes eliminate the user's inconvenience of pre-weighing filters for gravimetric analysis

Competitively Priced Cassettes, Providing Exceptional Value

Micro-5

The decrease of the jet-to-plate distance (in the circular jet impactors) results in a critical decrease of the impactor's cut-off size, from about 2.5 microns of the widely used slit impactors to about 1 micron. This makes such an impactor efficient for collecting spores of all fungal species and even some bacterial species.

Cyclex-D

Utilizing a 360 degree impaction chamber, the Cyclex-D was pioneered to evenly and quantitatively collect aeroallergens. With a flow rate of 20 L/min, the capture & actual collection efficiency of the Cyclex-D exceeded 50% at d50=1µ compared to the industry norm of2.5 microns.

Air-O-CellTM

The Air-O-Cell™ is a unique air sampling cassette specifically designed for the rapid collection of a wide range of airborne aerosols including mold spores, pollen, insect parts, skin cell fragments, fibers (e.g. asbestos,fiberglass, cellulose, clothing fibers, etc.) and inorganic particulate (e.g. ceramic, fly ash, copy toner, etc.). The Air-O-Cell™ collects both viable & non-viable sample specimens, providing a much broader overview of potential allergens & contaminants than conventional sampling techniques.

Allergenco-D

The Allergenco-D sampling cassette was developed for the sampling and collection of aeroallergens & bioaerosols for quantitative analysis of mold spores, pollen, skin fragments, insects, combustion particles, toners, environmental dust, construction dusts & other airborne particulates. The Allergenco-D employs a patented laminar flow venturi which provides higher readable collection efficiency as well as a more well defined impaction trace, helping to reduce analysis time.

EMS-120170 Micro-5, 50/Box

EMS-120135 Cyclex-D, 50/Box

Sorbent Tubes

Sorbent tube sampling is the NIOSH/OSHA - approved method for collecting most hazardous gases and vapors from the air. Federal law has established Permissible Exposure Limits (PEL’s) for workers’ exposure to a variety of airborne chemical hazards. Sorbent tubes have been validated as a reliable tool for sampling requirements.

Sorbent Tubes are Easy to Use

SK-226-01 Anasorb CSC, Coconut Charcoal, 6 mm O.D. x 70 mm L, 50/Box

SK-226-01-Bulk Anasorb CSC, Coconut Charcoal, 6 mm O.D. x 70 mm L, 1000/Box

SK-226-09 Anasorb CSC, Coconut Charcoal, 8 mm O.D. x 110 mm L, 50/Box

SK-226-09-Bulk Anasorb CSC, Coconut Charcoal, 8 mm O.D. x 110 mm L, 1000/Box

Other tubes available.

RING

The RING is a radial symmetry diffusive sampler for gases and vapours airborne detection. Ready to use, cheap, small, light (less than 15 g) and safe, this sampler has been designed for personal and environmental sampling. Thanks to its high precision the Ring gives accurate results with few hours or weeks display.

Some possible applications are:

• Personal sampling

• Working area sampling

• Air quality monitoring

• Pollutant sites monitoring

Tubes for Volatile Organic Sampling Trains (VOST)

EPA Methods 0030 and 0031 specify Volatile Organic Sampling Train (VOST) Tubes when sampling for VOC’s and Principal Organic Hazardous Constituents from stationary emission sources. Method 0030 specifies a train of three sorbent tubes: one Tenax and petroleum-based charcoal, and two Tenax. Method 0031 specifies one Anasorb 747 tube and two Tenax tubes. Low background levels make these sorbent useful for collecting low concentrations of VOC’s.

SK-226-134 Glass Open

SK-226-133 Glass Open

16 mm O.D. x 125 mm L, 5 gm (20/40 Mesh), Each

Sampling Of:

• Aldehydes

• Ammonia (NH3)

• Nitrogen Dioxide (NO2)

• Sulphur Dioxide (SO2)

• Ozone (O3)

• Volatile Organic Compounds (VOC) recovery by chemical desorption

A diffusive sampler with radial symmetry is characterized by a cylindrical diffusive surface (instead of plane), by a cylindrical adsorbing device, internal and coaxial to the adsorbing substrate, and a diffusive path parallel to the radius.This special design, which maximize the diffusive surface compared to similar axial samplers, allows an extremely high sampling rate inspite of its small dimensions. Ring’s high sampling rate guarantees very low levels of analytical sensitivity. Also, sampler efficiency, is not influenced by air speed changes and is independent from the related humidity.

AQ-P500R Supporting Plate W/ Clips, Label & Transparent Label Pocket, 10/Pack

AQ-P502R Blue Diffusive Body, 10/Pack

AQ-P503R Metal Clip For Body, 10/Pack

AQ-P700R Adsorbing Cartridge For Ammonia (NH3), 10/Pack

AQ-P702R Adsorbing Cartridge For Nitrogen Dioxide (NO2), 10/Pack

AQ-P704R Adsorbing Cartridge For Sulphur Dioxide (SO2), 10/Pack

AQ-P706R Adsorbing Cartridge For Volatile Organic Compounds (VOC’s and BTEX), 10/Pack

SafeAir® Badges

Direct Read Passive Monitoring System

The SafeAir® system consists of a direct reading colorimetric badge and a color comparison chart. SafeAir® badges are available for 21 different gases. Provides immediate visual indication when specific chemical is present.

• Homogeneous and stable color formation due to coated indicator layer

• Highly sensitive and selective

• Ideal for leak detection and daily exposure screening

• No laboratory analysis needed

MT-382010-50

Chemical: Ammonia, 4.0 ppm x hr, Min. Detectable Limit (8 hrs): 0.50 ppm, 50/Pack

MT-382017-50

Chemical: Carbon Dioxide, 8,000 ppm x hr, Min. Detectable Limit (8 hrs): 1,000 ppm, 50/Pack

MT-383009

Chemical: Carbon Dioxide Color Comparator (1,800 - 80,000 ppm/hr), Each

MT-382012-50

Chemical: Carbon Monoxide, 7.0ppm x hr, Min. Detectable Limit (8 hrs): 0.9 ppm, 50/Pack

MT-382009-50

Chemical: Chlorine, 0.18ppm x hr, Min. Detectable Limit (8 hrs): 0.023 ppm, 50/Pack

MT-383010

Chemical: Chlorine Color Comparator (0.3 - 3.0 ppm/hr), Each

MT-382011-50

Chemical: Formaldehyde, 0.4ppm x hr, Min. Detectable Limit (8 hrs): 0.05 ppm, 50/Pack

ChromAir® Colorimetric Badges Direct Read Passive Monitoring System

The ChromAir® system consists of a direct reading colorimetric badge and a color comparison chart. Users can now monitor for toxic gases without the use of a pump or time consuming laboratory analysis. Immediate, on-site results. Highly sensitive and selective. Exposure data read directly from badge. Immediate response for short-term exposure measurements. Measure TWA exposures. Patented design minimizes effects of humidity and air velocity. Light-weight and cost effective for personnel and area monitoring. No laboratory analysis needed.

MT-380020-10

Chemical: Acetone, 20 - 24,000 ppm x hr,

Min. Detectable Limit (8 hrs): 2.5ppm, 10/Pack

MT-380003-10

Chemical: Ammonia , 4 - 300 ppm x hr,

Min. Detectable Limit (8 hrs): 0.5ppm, 10/Pack

MT-384008

Chemical: Ammonia Color Comparator (3 - 600 ppm/hr), Each

MT-380008-10

Chemical: Carbon Monoxide, 10 - 525 ppm x hr,

Min. Detectable Limit (8 hrs): 1.25ppm, 10/Pack

MT-384006

Chemical: Carbon Monoxide Color Comparator (4 - 630 ppm/hr), Each

MT-380004-10

Chemical: Chlorine, 0.4 - 13 ppm x hr, Min. Detectable Limit (8 hrs): 0.05ppm, 10/Pack

MT-384005

Chemical: Chlorine Color Comparator (0.2 - 20), Each

MT-380007-10

Chemical: Formaldehyde, 0.3 - 12 ppm x hr, Min. Detectable Limit (8 hrs): 0.04 ppm, 10/Pack

MT-384001

Chemical: Formaldehyde Color Comparator (0.3 - 40 ppm/hr), Each

MT-380009-10

Chemical: Hydrogen Sulfide, 1 - 240 ppm x hr, Min. Detectable Limit (8 hrs): 0.13ppm, 10/Pack

MT-384002

Chemical: Hydrogen Sulfide Color Comparator (0.4 - 350 ppm/hr), Each

MT-380018-10

Chemical: Mercury , 0.125 - 1.6 ppm x hr, Min. Detectable Limit (8 hrs): 0.016 mg/m3, 10/Pack

MT-384003

Chemical: Mercury Color Comparator (0.12 - 3.2 mg/m3/hr), Each

MT-380010-10

Chemical: Ozone, 0.08 - 1.6ppm x hr, Min. Detectable Limit (8 hrs): 0.01 ppm, 10/Pack

MT-401966-10 Badge Clips, 10/Pack

MT-382002-50

Chemical: Hydrazine, 8.0 ppb, Min. Detectable Limit (8 hrs): 1.0 ppm, 50/Pack

MT-383001

Chemical: Hydrazine Color Comparator (4.5 – >300 ppb/hr), Each

MT-382015-50

Chemical: Hydrogen Sulfide, 2.0ppm x hr, Min. Detectable Limit (8 hrs): 0.25 ppm, 50/Pack

MT-382013-50

Chemical: Nitrogen Dioxide, 1.0ppm x hr, Min. Detectable Limit (8 hrs): 0.125 ppm, 50/Pack

MT-382004-50

Chemical: Ozone, 0.05ppm x hr, Min. Detectable Limit (8 hrs): 0.006 ppm, 50/Pack

MT-382014-50

Chemical: Sulfur Dioxide, 0.2ppm x hr, Min. Detectable Limit (8 hrs): 0.025 ppm, 50/Pack

MT-401966-10 Badge Clips, 10/Pack

Carbon Monoxide 5/c, 5 - 700 ppm, SEI Certified, 10/Box

DR-CH20601

Carbon Monoxide 10/b, 10 - 3,000 ppm, 10/Box

DR-CH24301

Chlorine 0.2/a, 0.2 - 30 ppm, 10/Box

DR-CH20201

Ethyl Acetate 200/a, 200 - 3,000 ppm, 10/Box

Accuro® Gas Detector Pump

DrägerTubes® & Accuro® Pump

More than 500 substances can be detected and measured using the Dräger-Tube system. Typical applications include the monitoring of workplace air, emission measurements, quality control, process control and monitoring of compressed air for breathing apparatus, as well as environmental and hazardous substance detection applications.

Short-Term Measurements with Dräger-Tubes

For short-term measurements more than 160 Dräger-Tubes are available to measure the socalled spot concentrations of specific gases. A wide range of different gases and vapours can be detected and measured, e.g. determining and measuring concentration peaks, measuring personal exposure in the inhalation area, detecting leaks in pipelines, gas installations etc. and air analysis in sewers, shafts and confined spaces.

DR-6728051

Ethylene 50/a, 50 - 2,500 ppm, 10/Box

DR-6733081

Formaldehyde 0.2/a, 0.2 - 5 ppm, 10/Box

DR-8101751

Formaldehyde 2/a, 2 - 40 ppm, 10/Box

DR-6728391

Hexane 100/a, 50 - 3,000 ppm, 10/Box

DR-CH29501

Hydrochloric Acid 1/a, 1 - 10 ppm, 10/Box

DR-8101511

Hydrogen 0.2%/a, 0.2 - 2 Vol.-%, 10/Box

R-8101461 Hydrogen Sulfide 0.2/a, 0.2-5 ppm, 10/Box

DR-6728041

Hydrogen Sulfide 0.5/a, 0.5-15 ppm, 10/Box

DR-8101831 Hydrogen Sulfide 1/d, 1 - 200 ppm, SEI Certified, 10/Box

DR-CH29101 Hydrogen Sulfide 100/a, 100 - 2,000 ppm, 10/Box

DR-8103281 Mercaptan 0.1/a, 0.1 - 15 ppm, 10/Box

DR-CH23101 Mercury Vapour 0.1/b, 0.05 - 2 mg/m3, 10/Box

DR-CH30001

Nitrogen Dioxide 0.5/c, 0.5 - 25 ppm, 10/Box, SEI Certified

DR-CH31001 Nitrous Gases 2/a, 2 - 100 ppm, 10/Box

DR-8103261

Oxygen 5%/C, 5 - 23 Vol.-%, 10/Box

DR-6733181

Ozone 0.05/b, 0.05 - 1.4 ppm, 10/Box

DR-8101691 Petroleum Hydrocarbons 10/a, 10 - 300 ppm, 10/Box

The Accuro® Gas Detector Pump is a manually operated bellows pump that draws a calibrated 100 milliliter sample through the short-term Dräger-Tubes.

DR-6400000

Accuro® Pump Includes Tube Opener & Allen Wrench

DR-4053473

Soft-Side Accuro® Pump Kit Includes Pump, Tube Opener, Spare Parts Kit, Allen Wrench & Nylon Carrying Case

DR-4056443

Hard-Side Accuro® Pump Kit Includes Pump, Tube Opener, Spare Parts Kit, 10 Rubber Caps, Allen Wrench & Plastic Carrying Case

Features

• One-Hand Operation

• Very Low Maintenance

• End-Of-Stroke Indicator

DR-6730201 Petroleum Hydrocarbons 100/a, 100 - 2,500 ppm, 10/Box

DR-8101611

Phosphine 0.01/a , 0.01 - 1 ppm, 10/Box

DR-CH25301 Smoke Tubes N/A, 10/Box

DR-6728491

Sulphur Dioxide 0.5/a, 0.5 - 25 ppm, 10/Box

DR-6728781

Sulphuric Acid 1/a, 1 - 5 mg/m3, 9/Box

DR-8101661

Toluene 5/b, 5 - 300 ppm, 10/Box

DR-CH21101

Trichloroethane 50/d, 50 - 600 ppm, 5/Box

DR-8101721

Vinyl Chloride 0.5/b, 0.5 - 30 ppm, 10/Box

DR-8101781

Water Vapour 1/b, 1 - 40 mg/L, 10/Box

DR-6733161

Xylene 10/a, 10 - 400 ppm, 10/Box

Other tubes available.

• Built-In Automatic Stroke Counter

CMS Analyzer and Chips

Digital display of gas concentration eliminates ambiguous results. Internal recorder stores up to 50 measurements with time/date stamp. Just load a CMS gas specific chip into the bottom port of the analyzer. Easy-to-use, three-step slide switch allows analyzer to take measurement. Gas concentration is displayed in seconds with digital readout. Operates on four "AA" batteries (included).

Features

•Chips contain 10 tests each

•Easy as 1-2-3 Simple operation, simplified training

•Accurate Measure quantities as low as 0.20 ppm Benzene

•Fast Response Times

•Accuracies of ± 4 to 7% of measured value is achieved for most gases

•CMS has been validated by a nationally accredited third party laboratory

Diffusion (Passive Sampling) Tubes

Get on-site measurements of 8-hour exposures with the Dräger Diffusion Tubes. This gas and vapor measurement technique provides a quick, simple, and on-site means to determine employee exposures.

Unlike Short-Term detector tubes that require a pump for operation, Diffusion Tubes rely on natural movement of the gases and vapors to enter the tube and cause a color change. Simply read the indication on the graduated scale (ppm x hours) and divide by the amount of hours the Diffusion Tube has been in use for a TWA measurement. No waiting, no analysis fees, no laboratory services, no turn-around time; just on the spot measurement. The Tube Holder allows you to place the Diffusion Tube in the breathing zone of the people being monitored or in the suspected areas.

DR-6733014

Diffusion Tube Holder, 3/Pack

DR-8101071

Acetic Acid 10/a-D, 10 - 200 ppm x h

DR-8101301

Ammonia 20/a-D, 20 - 1,500 ppm x h

DR-8101161

Butadiene 10/a-D, 10 - 300 ppm x h

DR-8101381

Carbon Dioxide 500/a-D, 500 - 20,000 ppm x h

DR-8101051

Carbon Dioxide 1%/a-D, 1 - 30 Vol.% x h

DR-6733191

Carbon Monoxide 50/a-D, 50 - 600 ppm x h

DR-8101151

Ethanol 1000/a-D, 1,000 - 25,000 ppm x h

DR-6733111

Hydrochloric Acid 10/a-D, 10 - 200 ppm x h

DR-6733221

Hydrocyanic Acid 20/a-D, 20 - 200 ppm x h

DR-6733091

Hydrogen Sulfide 10/a-D, 10 - 300 ppm x h

DR-8101111

Nitrogen Dioxide 10/a-D, 10 - 200 ppm x h

DR-8101401

Perchloroethylene 200/a-D, 200 - 1,500 ppm x h

DR-8101091

Sulfur Dioxide 5/a-D, 5 - 150 ppm x h

DR-8101421

Toluene 100/a-D, 100 - 3,000 ppm x h

DR-8101441

Trichloroethylene 200/a-D, 200 - 1,000 ppm x h

Air Monitoring Chip Analyzer

DR-6405300

CMS Analyzer With Data Recorder. Includes Analyzer, 4 "AA"

Alkaline Batteries & 3 mm Allen Wrench

DR-6405060

Remote System Includes Pump, 3 m Extension Hose With Adapter, Float Probe & Screwdriver

DR-8313025

Telescopic Probe (Requires Remote System)

DR-4594631

Nylon Transport Case

DR-6405080

Leather Carrying Case W/Shoulder Strap For Analyzer

DR-6405090

Leather Carrying Case For Chips

DR-6406330

Acetic Acid, 2.0 - 50.0 ppm

DR-6406470

Acetone, 40.0 - 600 ppm

DR-6406130

Ammonia, 2.0 - 50.0 ppm

DR-6406570

Ammonia, 100 - 2,000 ppm

DR-6406280

Benzene, 10.0 - 250 ppm

DR-6406190

Carbon Dioxide, 200 - 3,000 ppm

DR-6406210

Carbon Dioxide, 1.0 - 20.0 Vol.%

DR-6406080

Carbon Monoxide, 5.0 - 150 ppm

DR-6406010

Chlorine, 0.20 - 10.0 ppm

DR-6406580

Ethylene Oxide, 0.40 - 5.0 ppm

DR-6406540

Formaldehyde, 0.20 - 5.0 ppm

DR-6406090

Hydrochloric Acid, 1.0 - 25.0 ppm

DR-6406520

Hydrogen Sulfide, 0.20 - 5.0 ppm

DR-6406050

Hydrogen Sulfide, 2.0 - 50.0 ppm

DR-6406360

Mercaptan, 0.25 - 6.0 ppm

DR-6406120

Nitrogen Dioxide, 0.50 - 25.0 ppm

DR-6406240

Nitrous Gases, 10.0 - 200 ppm

DR-6406490

Oxygen, 1.0 - 30 Vol.%

DR-6406430

Ozone, 25.0 - 1,000 ppb

DR-6406200

Petroleum Hydrocarbons, 20.0 - 500 ppm

DR-6406270

Petroleum Hydrocarbons, 100 - 3,000 ppm

DR-6406560

Styrene, 2.0 - 40.0 ppm

DR-6406180

Sulfur Dioxide, 5.0 - 150 ppm

DR-6406250

Toluene, 10.0 - 300 ppm

DR-6406230

Vinyl Chloride, 10.0 - 250 ppm

DR-6406260

Xylene, 10.0 - 300 ppm

Single-Gas Detectors with Easy Two-Button Operation!

Dräger Pac® 3500/5500 Single Gas Monitor

Their impact-resistant housing features a protective rubber coating and is impervious to corrosive chemicals and meets the requirements of IP65 to ensure operation even when splashed with water. Monitor is maintenance free and can be easily operated using two buttons. Its small size makes it comfortable and easy to wear all day on a belt, chest pocket, or lapel. A loud audible alarm, two bright visual alarms, and strong vibrating alarm alert you to hazardous concentrations of gas.

The Pac® 3500, 5500 and 7000 shows both the gas concentration and the measurement unit. Alternatively, the instrument can be configured to show only the gas detected. The concentration is then displayed only when the set alarm level has been exceeded. It is complete with an infrared interface and is able to store up to 60 events with dates and times. The Pac® 3500 is a robust single gas detector with 2 years operation time.

The Pac® 5500 is a single gas detector with no lifetime limitation.

The Pac® 7000 detects CO, CO2, Cl2, HCN, H2S, NH3, O2, PH3, SO2

Pac® 3500

DR-4543957

Dräger Pac® 3500 CO, 0 - 500 ppm, 1 ppm Resolution, Alarm 1: 35 ppm, Alarm 2: 50 ppm

DR-4543958

Dräger Pac® 3500 H2S, 0 - 100 ppm, 0.2 ppm Resolution, Alarm 1: 10 ppm, Alarm 2: 20 ppm

DR-4543959

Dräger Pac® 3500 O2, 0 - 25% Vol., 0.1% Vol. Resolution, Alarm 1: 19.5% Vol., Alarm 2: 23.5% Vol.

GasWatch 2

The GasWatch features hands free gas monitoring with a watch type design. It has fast, accurate response with a digital LCD display. The GasWatch detects H2S, CO or O2

Specifications

•Diffusion type sampling method, electrochemical cell detection (CO, H2S) and Galvanic cell (O2).

•Carbon Monoxide 0 - 500 ppm, Oxygen 0 - 40.0% O2

•Hydrogen Sulfide 0 - 100 ppm.

•Visual, audible, & vibration alarms

•TWA, STEL & PEAK hold functions

•3,000 hours of operation from 1 battery

•Intrinsically safe, CSA, C/US approved

•2 year warranty

Pac® 5500

DR-4543960 Dräger Pac® 5500 CO, 0 - 500 ppm, 1 ppm Resolution, Alarm 1: 35 ppm, Alarm 2: 50 ppm

DR-4543961 Dräger Pac® 5500 H2S, 0 - 100 ppm, 0.2 ppm Resolution, Alarm 1: 10 ppm, Alarm 2: 20 ppm

DR-4543962 Dräger Pac® 5500 O2, 0 - 25% Vol., 0.1% Vol. Resolution, Alarm 1: 19.5% Vol., Alarm 2: 23.5% Vol.

Accessories for Dräger Pac® 3500, 5500 & 7000

DR-8319559

Pac Smart Bump/Cal Station (Order Gas Separately)

DR-8321010

Mobile Printer/Interface Set For Pac Smart Bump/Cal Station, Records 700 Tests To Memory/PC &/Or Provides Printout, Includes Charger, NiMHy Batteries, ("AA" Alkaline Optional), USB Cable, CCVision PC-Software

DR-8319002

Thermal Paper Replacement, Mobile Printer, (5 Rolls)

DR-4594580

Mobile Printer/Interface Only

DR-8318588

Calibration/Bump Test Adapter

DR-8318587

Communication Cradle & PacVision Software, Includes USB Cable

DR-4543808

Lithium Alkaline Battery, 3 V

DR-4543836

Dust & Water Filter, 4/Pack

DR-4543822

Leather Carrying Case W/ Velcro Belt Loop

DR-8317410

Simple Bump Test/Cal Station (Order Gas Separately)

DR-8318589

Pac XX00 ECal Instrument Module, Requires Master Or Module Adapter For Automated Testing & Documentation

Features

•3 gases to choose from CO, H2S, or O2

•Hands free gas monitoring

•Compact "watch type" design

•Fast, accurate response with digital LCD display

•Fits on your wrist, clothing, belt or hardhat

•Automatic backlight during alarm

•Manual backlight

•Sensor fail alarm

•PEAK hold function (min and max values for O2)

• TWA and STEL function

• Displays current time

• Visual, audible, and vibration alarms standard

• Over 3,000 hours of operation from 1 battery

• Intrinsically safe, CSA, C/US classified

• 2 year warranty

Dräger Pac® 7000

DR-8318970

Dräger Pac® 7000 CO, 0 - 1999 ppm, 1 ppm Resolution, Alarm 1: 35 ppm, Alarm 2: 50 ppm

DR-8318971

Dräger Pac® 7000 H2S, 0 - 100 ppm, 0.2 ppm Resolution, Alarm 1: 10 ppm, Alarm 2: 20 ppm

DR-8318972

Dräger Pac® 7000 O2, 0 - 25% Vol., 0.1% Vol. Resolution, Alarm 1: 19.5% Vol., Alarm 2: 23.5% Vol.

DR-8318973

Dräger Pac® 7000 HCN, 0 - 50 ppm, 0.1 ppm Resolution, Alarm 1: 2.5 ppm, Alarm 2: 4.5 ppm

DR-8318974 Dräger Pac® 7000 PH3, 0 - 20 ppm, 0.01 ppm Resolution, Alarm 1: 0.1 ppm, Alarm 2: 0.2 ppm

DR-8318975

Dräger Pac® 7000 CO2, 0 - 5% Vol., 0.1% Vol. Resolution, Alarm 1: 0.5% Vol., Alarm 2: 1.0% Vol.

DR-8318976

Dräger Pac® 7000 SO2, 0 - 100 ppm, 1 ppm (0.1) Resolution, Alarm 1: 2 ppm, Alarm 2: 4 ppm

DR-8318977

Dräger Pac® 7000 NO2, 0 - 50 ppm, 0.1 ppm Resolution, Alarm 1: 2.5 ppm, Alarm 2: 5.0 ppm

DR-8318978

Dräger Pac® 7000 Cl2, 0 - 20 ppm, 0.05 ppm Resolution, Alarm 1: 0.5 ppm, Alarm 2: 1.0 ppm

DR-8318979

Dräger Pac® 7000 NH3, 0 - 300 ppm, 1 ppm Resolution, Alarm 1: 25 ppm, Alarm 2: 50 ppm

RK-72-0007RK

GasWatch 2 Measuring O2 0 - 40%

RK-81-GW2X-LV

Calibration Kit For GasWatch 2 Measuring O2

RK-73-0040RK

GasWatch 2 Measuring CO 0 - 500 ppm

RK-81-GW2C-LV

Calibration Kit For Gaswatch 2 Measuring CO

RK-73-0041RK

GasWatch 2 Measuring H2S 0 - 100 ppm

RK-81-GW2H-LV

Calibration Kit For GasWatch Measuring H2S

Specifications

4 Gases to choose from: LEL, CO, H2S or O2

• OX - 01 (O2 0 - 40%)

• CO - 01 (CO 0 - 500 ppm)

• HS-01 (H2S 0 - 100 ppm)

• GP-01 (LEL 0 - 100%)

• Visual, audible, & vibration alarms

• TWA, STEL & PEAK hold functions

SC-01 Single Toxic Gas Monitor

Features

• Smart interchangeable sensors

• Wide range of toxic gases

• Unique extender cable for remote monitoring

• Compact (2.5" x 5.2" x 1.2")

• Lightweight, 7.6 oz

• 250 hours of continuous operation

• Operates on 2 "AA" alkaline batteries

• Audible / visual / vibration alarms

• Datalogging standard

• Impact resistant protective rubber boot

• Intrinsically safe, CSA, C/US classified

Detectable GasesRanges

Arsine (AsH3) 0 - 1.5 ppm

Ammonia (NH3)0 - 75 ppm

Carbon Monoxide (CO) 0 - 75 ppm

Chlorine (Cl2) 0 - 3.00 ppm

Hydrogen Sulfide (H2S) 0 - 30.0 ppm

Phosphine (PH3) 0 - 1.00 ppm

• 3,000 hrs of operation/16 hrs for LEL version

• Pocket size 1.4" W x 4.1" H x 0.8" D

• Impact and water resistant

• Low battery alarm

• Intrinsically safe, CSA, C/US approved

• 2 year warranty

01 Series - Single Gas Clip On Personal Monitor

RK-72-0008RK-03

OX-01, 0 - 40% O2 W/ Alkaline & Belt Clip

RK-81-OX01-LV Calibation Kit For OX-01

RK-72-0033RK-03

GP-01, 0 - 100 %LEL W/ Alkaline & Belt Clip

RK-81-GP01-HLV

Calibration Kit For GP-01 Hexane

RK-81-GP01-LV Calibration Kit For GP-01 Methane

RK-73-0044RK-03

CO-01, 0 - 500 ppm With Alkaline & Belt Clip

RK-81-CO01-LV

Calibration Kit For CO-01

RK-73-0046RK-03

HS-01, 0 - 100 ppm With Alkaline & Belt Clip

RK-81-HS01-LV Calibration Kit For HS-01 & HS-01S

All calibration kits includes a 34 L cylinder, regulator, cal cup, case & tubing. 01 Series are also available with alligator clip.

RK-73-0050RK-AsH3 SC-01 Arsine (AsH3)

RK-73-0050RK-NH3 Ammonia (NH3)

RK-73-0050RK-CO Carbon Monoxide (CO)

RK-73-0050RK-CL2 Chlorine (Cl2)

RK-73-0050RK-H2S Hydrogen Sulfide (H2S)

RK-73-0050RK-PH3 Phosphine (PH3)

RK-73-0050RK-SO2 Sulfur Dioxide (SO2)

RK-20-0320RK Carrying Case For SC-01

RK-47-1561RK Extender Cable, 3 Meters, For SC-01

Sulfur Dioxide (SO2)0 - 6.00 ppm are available please specify).

FP-30 Formaldehyde Gas Detector

Features

•Simple operation

• Specific to Formaldehyde

•Built-in sample draw pump

• Easy to read LCD display

•Self-diagnosis

•Uses photoelectric photometry technology

•Direct digital readout

•Colorimetric detection tablet method

•No false readings from interfering gases

•Operates on 4 "AA" alkalines

• Stores 99 readings

•No warm up time

GX-2001 Personal 4 Gas Monitor

Features

• Simultaneous detection of 4 gases

LEL, O2, H2S and CO

• Audible, visual & vibration alarm

• Alarm trend data

• Datalogging standard

• Autocalibration

• Rechargeable Ni-MH battery pack

• Battery pack recharges in 90 minutes

• Continuously operates for up to 18 hours

• Large LCD display screen

• Automatic backlighting at alarm

• High impact, RFI shielded body

• STEL and TWA readouts (USA Version)

• Continuously displays current time

• Intrinsically safe, CSA, C/US approved

• 2 year warranty

RK-72-0233RKC

GX-2001, 4 Gas, LEL / O2 / H2S / CO

RK-72-0232RKC

GX-2001, 3 Gas, LEL/O2/H2S

RK-81-GX01HSCO-LV

Calibration Kit For RK-72-0233RKC & RK-72-0232RKC

RK-72-0231RKC

GX-2001, 3 Gas, LEL / O2 / CO

RK-72-0230RKC

GX-2001, 2 Gas, LEL/O2

RK-81-GX01CO-LV

Calibration Kit For RK-72-0231RKC & RK-72-0230RKC

All calibration kits include a 34 L cylinder, calibration cap, regulator, case & tubing.

Price includes Ni-Cad battery pack, charger & belt clip.

GX-2003, 5 Sensor Sample Draw

Gas Monitor

Features

• Monitors LEL, O2, CO, and H2S

• 0 to 100% volume Methane (Optional)

• Auto-ranging display of % volume and % LEL

• Internal sample drawing pump with 40 foot range

• Compact size, weighs only 11 oz

• Vibration, visual, and audible alarms

• Automatic backlight during alarms

• Calibration reminder with lock out option

• Ni-MH or alkaline power source

• Battery pack charges in or out of the instrument

• Quick charge (complete charge in 90 minutes)

• Glove friendly glow in the dark buttons

• Alarm latching or non-latching

• Up to 600 hours of datalogging with alarm trends

• Logs last 20 calibration events

• TWA and STEL readings with lunch-break mode

• Intrinsically safe, CSA, C/US classified

• 2 year warranty

FP-30 Detection Ranges

30 minute sample 0 - 0.4 ppm (0.005 ppm/digit)

15 minute sample 0 - 1.0 ppm (0.01 ppm/digit)

RK-73-1060RK

FP-30 Formaldehyde Detector

RK-65-TAB-008

Detection Tablets For FP-30, 20/Box (1 Test Each)

Multi-Gas Detectors

RK-72-0253RKC

GX-2003, 3 Gas, LEL / % Vol CH4/O2

RK-72-0261RKC

GX-2003, 3 Gas, LEL / O2 / H2S

RK-72-0271RKC

GX-2003 4 Gas LEL / O2 / CO / H2S

RK-72-0273RKC

GX-2003 4 Gas % Vol (HC) / LEL / O2 / CO

RK-72-0281RKC

GX-2003 5 Gas % Vol (HC) / LEL / O2 / CO / H2S

RK-81-GX03VCO-LV

Calibration Kit For RK-72-0253RKC & RK-72-0273RKC

RK-81-GX03HSCO-LV

Calibration Kit For RK-72-0261RKC & RK-72-0271RKC

RK-81-GX03VHSCO-LV

Calibration Kit For RK-72-0281RKC

All calibration kits include a 34 L cylinder, gas bag, regulator, case & tubing.

Price includes Ni-Cad battery pack, 115 V charger, wrist strap, probe, 10' hose & rubber boot with belt clip.

Gas Detected All Combustible Gases% VolumeOxygenHydrogen SulfideCarbon Monoxide (Methane as standard)Methane(O2)

Smallest, Lightest 4 Gas Monitor on the Market!

GX-2009

Features

•Simultaneous detection of 4 gases, LEL, O2, H2S & CO

•Dimensions: 2.7" H x 3" W x 1" D, 4.6 oz

•Dual audible alarm ports (95 db @ 30 cm)

•3 visual alarm LED’s

•Vibration alarm

•IP-67 waterproof/dustproof design

•Calibration lock out or reminder controls

•Large capacity data logging standard

•8 alarm trends

•Log time range of 10 to 300 hours

•100 calibration records

•20 hours of operation (NiMH batteries)

•Large LCD display screen

•Automatic backlighting at alarm Impact resistant over-mold body, RFI shielded body

•STEL and TWA readouts

•Intrinsically safe, IECEx / ATEX ... approved (CSA, C/US pending)

•2 year warranty

SM-2000 Series Calibration Stations

Features

•Stand alone system, no PC needed for operation

•Calibrate, bump test, charge, and archive data

•Software manages records by serial #, user ID, or station ID

•Each station is equipped with configuration control and status indicators

•User adjustable test times and tolerances

•Automatic quick charge of instrument in 90 minutes or less

•Alkaline recognition – will not attempt to charge alkaline batteries (SM2003U)

•Exhaust line connection for test gas venting

•Records are stored as a tab delineated text file (.txt format can be imported into a spreadsheet)

•Software is Windows 2000, and XP compatible

•Operates on any Pentium II or higher PC

•USB port for downloading data to a USB flash drive

•USB flash drive included

Includes Power Cord, Usb Flash Drive & Software

RK-81-SM2003U

GX-2003 Calibration Station, Includes Power Cord, Usb Flash Drive & Software

RK-81-SM2001UC

GX-2001 Calibration Station, Includes Power Cord, Usb Flash Drive & Software

RK-81-SM2003UC

GX-2003 Calibration Station, Includes Power Cord, Usb Flash Drive & Software

RK-72-0310RKC

GX-2009, 3 Gas, LEL / O2 / H2S W/ Alligator Clip & 115 / 220 V AC Charger

RK-72-0311RKC

GX-2009, 3 Gas, LEL / O2 / CO W/ Alligator Clip & 115 / 220 V AC Charger

RK-72-0314RKC GX-2009, 4 Gas, LEL / O2 / H2S / CO W/ Alligator Clip & 115 / 220 V AC Charger

RK-81-GX01HSCO-LV Cal Kit GX-2009 For RK-72-0310RKC & RK-72-0314RKC

RK-81-GX01CO-LV Cal Kit GX-2009, For RK-72-0311RKC

RK-81-2120RK Confined Space Kit Includes Padded Case, RP-6 Pump, 10' Hose & Probe All calibration kits include a gas cylinder, regulator, case & tubing.

DATA CAL 2000 Docking & Calibration Station

The RKI Data Cal 2000 Docking and Calibration Station is a comprehensive instrument management system which provides charging, downloading, calibration, bump testing, and configuration for our Model GX-2009, GX-2003 and GX-2001 gas detection instruments. The system has configuration capabilities for alarm setting, datalog and calibration interval, user and location ID, and many other instrument parameters. Factory and user default settings are available for upload to instruments. The Data Cal 2000 is supplied with PC software, power and serial cords, and operating instructions. The Data Cal 2000 power requirements are 115 V AC, 50/60 Hz. PC or laptop to be supplied by customer.

Dräger X-am 2000

RK-81-DC2000

Data Cal 2000 Docking Station Includes Station, Power Cord, Serial Cable & PC Software CD

RK-81-DC2000-01

Data Cal 2000 Docking Station Includes Station, Power Cord, Serial Cable, PC Software CD, Demand Flow Regulator & Calibration Gas Cylinder

RK-81-DM2001

Docking Module For GX-2001

RK-81-DM2003

Docking Module For GX-2003

RK-81-DM2009

Docking Module For GX-2009 Calibration gases & regulators also available.

The Dräger X-am 2000 is one of a new generation of gas detectors which have been specially designed for personal monitoring use. The 1 to 4 gas detector reliably measures combustible gases and vapours, as well as O2, CO and H2S. Its ergonomic design, mobile phone dimensions and low weight make it the perfect companion in your daily work. Reliable measurement technology, long sensor life and easy operation guarantee maximum safety at extremely low cost of ownership.

Features

•An ergonomic instrument the size of a mobile phone

•Vapour-sensitive Ex measurement

•Robust and water-tight

•Gas inlets on two surfaces

•Long-life electrochemical sensors

•A range of alarm functions

Ideal for Confined-Space Monitoring!

DR-4543721 X-am 3000, Ex.: O2, CO, H2S Confined Space Kit

DR-4543718 X-am 3000; Ex.: O2, CO, H2S W/ Internal Pump

Accessories

DR-4543625

Datalogger Option (Factory Installed)

DR-4530120

PC Communication Cable

Small size and light weight make this monitor ideal for confined-space entry or all-day wear. Large, easy-to-read display quickly indicates gases measured and their concentrations. Monitor features two high-intensity alarm lights, a loud audible alarm, and a vibrating alarm to alert you of hazards even in high-noise areas. Three easy-to-use buttons allow you to power unit, acknowledge alarm, and access features. Rugged, IP65rated, chemical-resistant polymer housing withstands bumps and drops associated with harsh industrial environments and confined-space entries.

Approvals: UL and cUL classified intrinsically safe in Class I, Div. 1, Groups A, B, C, D, E, F, G T4; CSA; ATEX; CE; MSHA

DR-8314034

GasVision Software For Data Download & Data Management

DR-6408515

CC-Vision Software For Instrument Configuration

DR-8317719 X-am 3000 E-Cal Module

All instruments above include XS µPac DrägerSensors® for O2, CO &/or H2S gases with a 2 year warranty & a CatEx2 sensor for flammable gases with a 2 year warranty; NiMH battery pack, calibration adapter, maintenance tool, battery charger with power supply, short instruction card & manual. Pump units also include internal sample pump, pump adapter, 10 ft Tygon® tubing & water stop filter. Confined space kits are packaged in a carry case with calibration accessories & include a rubber boot.

Dräger X-am 7000

Is the innovative solution for the simultaneous and continuous detection of up to five gases. A combination of more than 25 sensors allows flexible solutions to individual monitoring tasks. The Dräger X-am 7000 can be equipped with three electrochemical, and two catalytic bead, infrared or photoionisation sensors. It is the ideal companion in a great number of applications where reliable monitoring of Oxygen, toxic and combustibles gases and vapors in the ambient air is necessary.

Features

•Flexibility through sensor variety = 25 different Dräger Sensors allows the detection of more than 100 gases and vapors

•Intelligent and interchangeable sensors = each sensor is recognized automatically by the instrument

•Intuitive software functions = functions such as TWA and STEL values, as well as, peak hold leak search functionality

•Rugged & waterproof = rubber-boot protects the unit against damage from a drop of 1.5 m (5 ft) & built-in dust and splash water protection

•Multiple warning systems = loud multi-tone horn & visual alarm can be seen through 360°

•Information at a glance = large graphic display and the alarm auto-zoom function

•Data management = logs up to 3,000 sets of values – data logging of 100 hrs when recording one set per minute

•Strong built-in pump = up to 45 m/150 ft long tube

•Approvals = ATEX, MED, UL, CSA, IECEx & CE-mark

Dräger Sensors XS, EC

DR-4552284

Custom X-am 7000 W/O Sensors (W/O Sensors, Use Installed Sensors Below)

Includes Indicated Sensors, Internal Pump, Battery Pack, Charge Cradle (DR-8316487), Multinational 100 - 240 V Power Supply (DR-8315635), Calibration Adapter (DR-8317656), Pump Adapter (DR-8317639), Shoulder Strap (DR-8316878), Dust-Water Trap (DR-4523078), 5 ft Tygon® Tubing, Service Tool & Manual

DR-4552282

X-am 7000 Same As Above But W/ Datalogger (W/O Sensors, Use Installed Sensors Below)

Above X-am 7000 Packages Include Indicated Sensors, Internal Pump, Battery Pack & Charge Cradle

Accessories

DR-8317684

Nylon Carrying Case

DR-8314034

Dräger Gasvision Software For Download & Data Management

DR-6408515

Dräger CC-Vision Software For Instrument Calibration & Configuration Sensors For Dräger X-am 7000

Dräger Sensors XS, EC

InstalledReplacementDescription SensorsSensors

DR-4595422DR-6809545 Amines XS 0 - 100 ppm

DR-4595407DR-6809145 Ammonia (NH3) XS 0 - 200 ppm

DR-4595414DR-6809175 Carbon Dioxide (CO2) XS 0 - 5.0% Vol.

DR-4595433DR-6809105 Carbon Monoxide (CO) XS 0 - 2,000 ppm

DR-4595431DR-6809120 Carbon Monoxide (CO) XS HC 0 - 10,000 ppm

DR-4595409DR-6809165 Chlorine (Cl2) XS 0 - 20.0 ppm

DR-4595453DR-6811360 Chlorine Dioxide (CIO2) XS 0 - 20.0 ppm

DR-4595412DR-6809135 Hydride XS 0 - 20.0 ppm

DR-4595423DR-6809185 Hydrogen (H2) XS 0 - 2,000 ppm

DR-4595452DR-6811365 Hydrogen (H2) XS HC 0 - 4.0% Vol.

DR-4595408DR-6809150 Hydrogen Cyanide (HCN) XS 0 - 50.0 ppm

DR-4595434DR-6809110 Hydrogen Sulfide (H2S) XS 0 - 100 ppm

DR-4595403DR-6809180 Hydrogen Sulfide (H2S) XS HC 0 - 1,000 ppm

DR-4595445DR-6810575 Hydrogen Sulfide (H2S) XS-2 SR 0 - 100 ppm

DR-4595405DR-6809155 Nitrogen Dioxide (NO2) XS 0 - 50.0 ppm

DR-4595404DR-6809125 Nitric Oxide (NO) XS 0 - 200 ppm

DR-4595424DR-6809200 Odorant XS 0 - 40.0 ppm

DR-4595410DR-6809115 Organic Vapor (OV) XS 0 - 200 ppm

DR-4595411DR-6809522 Organic Vapor-A (OV-A) XS 0 - 100 ppm

DR-4595435DR-6809130 Oxygen (O2) XS 0 - 25% Vol.

DR-4595443DR-6809550 Oxygen (O2) XS-100 0 - 100% Vol.

DR-4595442DR-6808582 Phosgene (COCl2) XS 0 - 3.00 ppm

DR-4595413DR-6809535 Phosphine (PH3) XS HC 0 - 1,000 ppm

DR-4595406DR-6809160 Sulfur Dioxide (SO2) XS 0 - 100 ppm

Methane Elimination Capabilities LEL % & PPM Readings

Standard

The EAGLE is a powerful, versatile instrument that does more than offer standard confined space protection. The EAGLE also provides detection combinations never before offered in a portable gas monitor featuring the industry’s widest selection of high quality, long life and field proven sensors. Rugged, weatherproof, easy to operate and maintain, the EAGLE is the industry’s answer to portable gas detection.

Specifications

•Alarm: Alarm levels are adjustable and can be latching or self resetting

•Functions: Autocalibration, alarm silence, demand zero, peak hold and a wide variety of other features. Each channel has 2 alarm levels plus TWA and STEL alarms for toxic channels. PPM/LEL hydrocarbon detection (5 ppm resolution) and a methane elimination switch for environmental applications.

•Sampling Method: Powerful, long-life pump can draw samples over 125 feet. Flow Rate approximately 2.0 SCFH.

•Power: Size D batteries, 4 alkaline or Ni-Cad. The EAGLE will continuously operate for over 30 hours on alkaline batteries or 18 hours on Ni-Cads

•Dimensions: 10.5" L x 5.9" x 7" Tall, 5 lbs

•Accessories: Long hoses, special probes, datalogging (up to 4 gases), continuous operation adapters, remote alarms and strobes, dilution fittings, internal hydrophobic filter, etc, are available to help satisfy almost any application

•Compliance: Intrinsically Safe, Class I, Division 1, Groups A, B, C, and D. CSA / NTRL & UL classified (most versions)

Toxins

and Other

RK-72-5101RK Eagle, LEL / PPM Hydrocarbons

RK-81-5101RK-LV

Calibration Kit For LEL / PPM (CH4)

RK-72-5115RK-XX

Eagle, CO2 (Cal Kit Determined W/ Specific Range)

RK-72-5201RK Eagle, LEL / PPM, O2

RK-81-5201RK-LV Calibration Kit For LEL / PPM (CH4), O2

RK-72-5301RK Eagle, LEL / PPM, O2, H2S

RK-81-5301RK-LV

Calibration Kit For LEL / PPM (CH4), O2, H2S

RK-72-5401RK Eagle, LEL / PPM, O2, CO, H2S

RK-81-5401RK-LV

Calibration Kit For LEL / PPM (CH4), O2, CO, H2S

RK-20-0640RK Eagle Carrying Case, Padded

RK-33-0156RK-01

Replacement Hydrophobic Filter Element, 5/Pack

RK-49-2150RK-01

Charger (115 V AC) & NiCads, added to Eagle

RK-57-0012RK-01

Datalogging board (Field Or Factory Installed)

RK-82-5007RK

Kit, Software & Cable (Required W/ Board)

RK-75-0001RK External Methane Elimination Switch

EAGLE 2

Features

Simultaneous detection of up to 6 different gases, over 500 gas monitoring configurations, wide range of toxic gases, PPM/LEL hydrocarbon detection, PID sensor for VOCs, IR sensors available for CO2, % LEL CH4, % volume CH4, password protection, transformer testing version available, datalogging with user friendly software, autocalibration, dual hydrophobic filters (most versions), ergonomic RFI/EMI/chemical/weather resistant enclosure, intrinsically safe design, CSA (C/US) (most versions), IRDA communications port with PC.

Enclosure

Dimensions

Weight

New & Improved!

Gases

Unique EAGLE 2 features include PPM or LEL hydrocarbon detection at the push of a button; infrared sensors for CO2, methane or hydrocarbons in LEL and % volume ranges; PID sensor for detecting low ppm levels of VOC gases; methane elimination feature for environmental applications; and a long list of super toxic gases and measurable ranges. The EAGLE 2 has a strong internal pump with a low flow auto shut off and alarm, which can draw samples from up to 125 feet even with the dual hydrophobic filters in place. This allows for quick response and recovery from distant sampling locations. The EAGLE 2 will continuously operate for over 16 hours on alkaline batteries or 18 hours on Ni-MH. A variety of accessories are also available to help satisfy almost any application such as long sample hoses, special float probes for tank testing, datalogging, continuous operation adapters, remote alarms and strobes, and dilution fittings, just to name a few.

Weatherproof, chemical resistant, RFI/EMI coated high impact polycarbonate-polyester blend. Can operate in rain or set into 2.0" of water without damage. Ergonomically balanced with rugged top mounted handle.

9.5" L x 5.25" W x 5.875" H

3.8 lbs (standard 4 gas with batteries)

Detection Principle Catalytic combustion, electrochemical cell, galvanic cell, infrared, PID & TC.

Sensor Life

2 years under normal conditions

Sampling Method Powerful, long-life pump (over 6,000 hours) can draw samples over 125 feet. Flow rate approximately 2.0 SCFH

Display

Alarms

Alarm Method

Backlight 128 x 64 graphics display. 4 x 20 LCD readout. Viewed through window in case top. Displays readings & status of all 6 channels simultaneously. Backlight, automatic for alarms and by demand with adjustable time

2 alarms per channel plus TWA and STEL alarms for toxics. The two alarms are fully adjustable for levels, latching or self reset and silenceable

Buzzer 95 dB at 30 cm, dual high intensity and LED’s

Operating Temp. & Humidity -10°C to 40°C (14°F to 104°F), 0 to 95% RH, non-condensing

Indication Accuracy Maximum variance +/- 5% of full scale

Response Time

Standard Accessories

Optional Accessories

Warranty

30 Seconds to 90% (for most gases) using standard 5 ft hose

Shoulder strap, alkaline batteries, hydrophobic probe, and 5 foot hose, internal hydrophobic filter (most versions)

Simutaneous datalogging of up to 6 gases. Remote alarms, dilution fitting (50/50), Ni-MH batteries, battery charger, 115 V AC, 220 V AC, or 12 V DC, continuous operation adapter, 115 V AC or 12 V DC, extension hoses, large internal hydrophobic filter

One year material and workmanship

RA-059-A110-000

MiniRAE Lite Monitor Only

RA-059-A110-100

MiniRAE Lite

The MiniRAE Lite is a reliable hand-held volatile organic compound (VOC) monitor on the market. Its photoionization detector’s (PID) range of 0 to 5,000 ppm makes it an ideal instrument for applications ranging from environmental to construction.

MiniRAE 3000 - PID

The MiniRAE 3000 detects volatile organic compounds(VOC’s). Its PhotoionizationDetector’s (PID) extended range of 0 to 15,000 ppm makes it an ideal instrument for applications from industrial hygiene, to leak and HazMat detection.

Features

•3 second response time

•Range up to 5,000 ppm

•Humidity compensation

•Big graphic display for easy overview of concentration

•Field-interchangeable battery pack,

•Integrated flashlight for better visibility in low light

•Multi-language support with 12 languages encoded

•Rugged housing withstands use in harsh environments

•IP-65 design

•Built-in sample pump draws up to 100' (30 m) horizontally or vertically

MiniRAE Lite W/ Accessories & Calibration Kit

NLB-H1055100PA

100 ppm Isobutylene, Bal Air, 34 L Steel Cylinder

RK-81-1050RK

0.5 LPM Regulator For 17 L & 34 L Steel Cylinders

PHOTOVAC 2020ComboPRO Portable Photoionization Detector (PID)

RA-059-B110-000 MiniRAE 3000 Monitor Only

RA-059-B110-300

Features

•A 3 second response time

•Humidity compensation with integral humidity and temperature sensors

•Real-time wireless data transmission with built-in RF modem or Bluetooth

•Integrated Flashlight for better view in dark conditions

•Multi-language support with 12 languages encoded

•Rugged housing withstands use in harsh environments

•IP67 Waterproof design for easy cleaning and decontamination in water

•Strong protective removable rubber boot

MiniRAE 3000 W/ Accessories & Calibration Kit

NLB-H1055100PA

100 ppm Isobutylene, Bal Air, 34 L Steel Cylinder

RK-81-1050RK 0.5 LPM Regulator For 17 L & 34 L Steel Cylinders

RapidVOC detection in air, water and soil in the harshest environments!

Stable, linear Photovac PID, ergonomic design, effortless data handling, dedicated calibration key, Dräger tubes for zero calibration, easy to use & lamp condition assessment.

Specifications

•Size: 9" (228.6 mm) long x 3" (76.2 mm) deep x 4.25" (107.9 mm) wide at display tapering to 2.6" (66.6 mm) at handle

•Weight: 1.9 lbs (0.86 kg)

•Detector: Instant on photoionization detector with standard 10.6 eV lamp, and optional 11.7 eV lamp

•Keypad: Two dedicated keys (ON/OFF and CAL) and three menu keys

•Datalogger Memory: 200 hours at 1 minute interval sampling

•Operating Temperature Range: Operating temperature: 0°C to 50°C (32°F to 122°F) / I/S Certified temperature: 0°C to 40°C (32°F to 104°F)

•Operating Humidity Range: 0 to 95% relative humidity (non-condensing)

•Operating Concentration Range: 0.1 ppm to 100 ppm (isobutylene equivalent) / 100 ppm to 10,000 ppm (isobutylene equivalent)

•Operating Humidity Range with Optional Humidity Pre-filter Tube: 0 to 100% relative humidity (non-condensing)

•Response Time: Less than 3 seconds, to 90%

•Low Detection Limit: 0.1 ppm Isobutylene

•Battery Capacity: 8 hrs

•Intrinsic Safety: Class I, Division 1, Groups A, B, C, & D, ATEX II 2 G EEx ib IIC T4 (TA = 0°C to +40°C)

PID Applications

Fenceline & perimeter monitoring, confined space pre-entry, solvent storage and piping, transportation vessels storage tank maintenance, site characterization, ambient air monitoring, emergency response and HazMat petroleum product(s) tank entry, soil headspace screening, health and safety monitoring surveying for buried chemical waste & aircraft fuel tank entry.

PH-A1760300

2020ComboPRO Monitor Only W/ Basic Accessories

PH-A1760301

2020ComboPRO W/ Field Kit (Cal Gas Sold Separately)

PH-A1760302

2020ComboPRO W/ VOC & Benzene Kit (Cal Gas Sold Separately)

NLB-H1055100PA, 100 ppm Isobutylene 34 L

PH-SW760371

English & French Version

NLB-H1055100PA

100 ppm Isobutylene, Bal Air, 34 L Cylinder

Other languages available: Spanish, German & Italian.

PHOTOVAC MicroFID

For accurate, reliable detection of VOC’s, the Photovac MicroFID is the right choice in flame ionization detection. At just 8.1 lbs (3.7 kg), the MicroFID is the smallest and lightest datalogging Flame Ionization Detector (FID) available.

MicroFID Applications

Leak Detection and Repair (U.S. EPA Method 21), landfill monitoring, natural gas leak detection petroleum products tank entry, emergency response, soil headspace screening, hazardous waste site delineation, solvent storage and piping, confined space preentry, underground storage tanks (UST) transportation vessels, storage tank maintenance, OSHA compliance, EPA compliance & remediation efficiency.

MicroFID Detectable Compounds

•Saturated Hydrocarbons: Methane, Ethane, Propane, n-Hexane

•Aromatics: Benzene, Toluene, Naphthalene

•Unsaturated Hydrocarbons: Acetylene, Ethylene, 1,3-Butadiene

•Chlorinated Hydrocarbons: Vinyl Chloride, Chloroform, Trichloroethylene, Methylene Chloride

•Ketones: Acetone, Methyl Ethyl Ketone, Methyl Isobutyl Ketone

•Alcohol: Methanol, Ethanol, Isopropanol, nButanol

PHOTOVAC 2020ppbPRO

Rapid VOC detection in air, water and soil in the harshest environments! Stable, linear PID, ergonomic design for the real world, effortless data handling, dedicated calibration key, Formaldehyde detection, Dräger tubes for zero calibration, easy to use & lamp condition assessment.

Applications

Low detection level for very toxic VOC’s, out-gassing from building &/or construction materials, VOC residuals analysis, lab hood & clean room monitoring, site characterization, ambient air monitoring, trace sources of VOC based odors, low level soil or water headspace screening, health & safety monitoring, maintenance & cleaning supplies, breath sampling & pesticides.

Specifications

•Size: 9"(228.6 mm) long x 3"(76.2 mm) deep x 4.25"(107.9 mm) wide at display tapering to 2.6"(66.6 mm) at handle

•Weight: 1.9 lbs (0.86 kg)

•Detector: Instant on photoionization detector with standard high performance 10.6 eV lamp, & optional 11.7 eV lamp

•Keypad: Two dedicated keys (ON/OFF and CAL) and three menu keys

•Datalogger Memory: 200 hrs at 1 minute interval sampling

•Operating Temperature Range: 0°C to 50°C (32°F to 122°F) I/S Certified temperature: 0°C to 40°C (32°F to 104°F)

•Operating Humidity Range: 0 to 95% relative humidity (non-condensing)

•Operating Humidity Range with Optional Humidity Pre-filter Tube: 0 to 100% relative humidity (non-condensing)

Specifications

•Size: 43.4 cm (17.1") long, 9.8 cm (3.85") wide, 18.8 cm (7.4") high

•Weight: 8.1 lbs (3.7 kg)

•Keypad: 16-key, fixed function

•Display: 2-line, 16-character LCD with alphanumeric readout

•Hydrogen Cylinder Discharge: Greater than 12 hours

•Hydrogen Cylinder Capacity: 9.2 liter

•Battery Capacity: 15 hours (snap-on replacement)

•Serial Output: RS – 232, 1200 - 19200 baud with no parity, for tabular and graphic print outs and connection to a Windows® compatible computer

•Audio Output: On Alarm, LoBatt and NoFlm

•Analog Output: 0 to 1 volt full scale

•Operating Temperature Range: 41°F to 105°F (5°C to 45°C)

•Operating Humidity: 0 - 100% Relative Humidity (non-condensing)

•Operating Concentration Range: 0.5 ppm to 2,000 ppm methane equivalent (Low Range) 10 ppm to 50,000 ppm methane equivalent (High Range)

•Detection Limit: 0.5 ppm methane

•Accuracy: Methane (after calibration with zero air and 500 ppm methane gas): within ± 0.5 ppm or ± 10% of actual methane concentration (0.5 ppm to 2,000 ppm range)

•Response Time: Less than 3 seconds

•Intrinsic Safety: Class I, Division 1, Groups A, B, C, & D

•Operating Concentration Range: 10 ppb to 40 ppm isobutylene equivalent (10 ppb resolution)

•Response Time: Less than 3 seconds, to 90%

•Low Detection Limit: 10 ppb Isobutylene

•Battery Capacity: 8 hrs

•Intrinsic Safety: Class I, Division 1, Groups A, B, C, & D, ATEX II 2 G EEx ib IIC T4 (TA = 0°C to +40°C)

PH-A1760120

Monitor Only W/ Basic Accessories

PH-A1760220 2020 ppbPRO W/ VOC Field Kit (Cal Gas Sold Separately)

NLB-H105510PA 10 ppm Isobutylene 34 L

CENELEC Certified according to EN50021, EEx nA ll T5, Demko No. 00Y127355X

PH-MX100053

MicroFID Hand-Held Flame Ionization Detector Includes 15 Hour Rechargeable Battery Pack, 100/240 V AC Universal Battery Charger, North American Fuel Gas Refill Adapter (CGA 350 fitting), 10 Fluoropore Membrane Filters, Multi Tool, 8" (20 cm) Teflon Sample Probe, Carrying Strap & User Manual, Classified Intrinsically Safe for Use in Class I, Division 1, Groups A, B, C, & D Hazardous Locations

PH-MX396800

MicroFID Field Kit Includes Carrying Case (PH-MX396007), Calibration Kit (PH-MX396011) & Computer Cable (PH-MX396051) (Cal Gas Sold Separately)

PH-MX396011 Extension Probe, Telescoping, 6 ft (1.8 m)

PH-MX396015

Fluoropore Water / Particulate Filter for MicroFID, Replacement, 25/Pack

PH-MX396016

MicroFID Exhaust Frit & Cap, Replacement Gas sold separately.

VOC Gas Sensors

Model C-21

Reliable & Cost Efficient!

Shirt Pocket Size Ozone Sensor

The model A-21ZX Portable Ozone Sensor provides a reliable and inexpensive way of checking generators, valves, piping and general environments for ozone leaks and for estimating ozone levels.  It can be used as a permanent monitor indoors when concentrations average below 0.1 ppm.  It may be used outdoors for ozone studies in moderate temperature conditions.

Model C-21 includes Audio Alarm, Battery Operation and Datalogger.

Applications

For paint shops, printers, dry cleaners, woodworkers, vehicle repair facilities, chemical production areas and wherever indoor air quality monitoring is required.

Features

•High sensitive to solvent vapors and other VOC’s

•Bright green-yellow-red display clearly shows hazard level of gas or vapor

•Detects down to OSHA, EPA, and other regulatory-mandated levels typically at low ppm concentrations

•Has built-in rechargeable battery for portable use in tracking leaks

•Rugged construction with many safety features

Specifications

•Range: Full scale: 50 - 100 ppm for most solvent based VOC’s

•Bargraph Display: Green = Normal, Yellow = Caution, Red = Danger

•Response time: Within a few seconds of the VOC gas reaching the sensor

•Measurement Principle: HMOS (heated metal oxide semiconductor) sensor

•Size: 85 x 35 x 60 mm (3.25" x 1.375" x 2.375")

•Weight: 140 g (5 oz)

•Power Requirements: 12 V DC at 300 mA AC adapters available worldwide

•Battery: Self-contained NiCad or NiMH, approximately 2 hours capacity, recharged by AC adapter overnight

Operation & Provision For External Alarm & Data Logger

ES-A-21ZX

Shirt Pocket Size Ozone Sensor

The A-21ZX Features

•Small size and high sensitivity due to HMOS (heated metal oxide semiconductor) sensor

•Sensitivity: as low as 0.02 ppm

•Range: 0 - 10 ppm

•Size: 50 x 100 x 25 mm (2" x 4" x 1")

•Weight: 170 g (6 oz)

•"Instant On" feature

•Ease of calibration and service

•Basic power requirement is 12 V DC unregulated, works from AC adapters available worldwide

•Digital readout in 0.01 ppm increments

•Rechargeable batteries last more than 8 hours

•Very simple operation

ES-C-21 Model C-21 Includes Audio Alarm, Battery

Lowest Cost for Ozone Sensing!

Model P03

Ozone Sensor, 0.02 - 2.00 ppm, 20% accuracy

Fixed Systems

Features

•Less than one minute response time

•8 hour TWA

•Data logger optional

•Audio, LED and vibration alarms

•Size: 66 x 35 x 14 mm (2.4" x 1.4" x .65")

•Weight: 28 g (< 1 oz)

•Up to 3 months battery life

•Standard watch battery

•Proprietary nanocell micropower sensor technology

A-22 Rugged and Versatile Ozone Sensor

A general purpose sensor and monitor. Designed for rugged indoor field use, factories, pilot plants, process facilities, sensor and monitoring uses of all kinds.

Features

•Autoranging .030 - 1.999 ppm and 2.0 - 20.00 ppm

•10% accuracy, T and RH compensated

•12 hour (est) battery life, 8 hour charge, 4 hour fast charge available

•Plug-in pre-calibrated sensor modules

•Internal data logger with instant readout of high, low and average of data

•Data port for external data logger such as our DL-3

•USB, 4 - 20 mA, 0 - 2 V DC outputs for loggers, computers and PLC

Single Point Stand Alone Monitor

The PS-2 is an effective solution for solvent vapor monitoring around degreasers or other processes, hydrogen monitoring in battery rooms, natural gas detection in basements around landfills, and many others.

Features

• LEL or PPM detection ranges available for many gases

• 2 alarm levels

• Stand alone system

• Input voltages: 115 V AC standard

• Audible and visual alarms

• Compact design

• Simple installation

• AC version equipped with power cord

• Relay contacts rated 12A @ 115 V AC

• Low maintenance

Sensor Type: Metal Oxide Semiconductor type (MOS)

Operating Temp: 35°F to 120°F (2°C to 49°C) RK-73-1021RK-01 PS-2

•Tilt stand and wall hanging hook

•Back light for LCD display

•Improved HMOS heated metal oxide sensor

•Size: 108 W x 222 L x 64 mm D, .71 kg (4 1/4" W x 8 3/4" L x 2 1/2" D, 1.6 lbs)

•Power source: Internal rechargeable batteries or 12 - 24 V DC, 500 mA, from external adapter / charger

Explosion Proof Gas Sensor / Transmitter S2 Series

Features

• Available gases include LEL, H2S, CO, PPM H2, and CO2

• Toxic gases include Cl2, NH3, SO2, HCN, and more

• Infrared sensor for combustibles and CO2

• Hydrogen-Specific not available

• Patented water repellent sensor coating

• 4 - 20 mA output

• Explosion proof construction

Stand Alone Explosion Proof Transmitter

Features

•Operates independent of a controller

•Direct digital readout on backlit LCD

•Available for LEL, H2S, CO, and O2

•4 - 20 mA & digital Modbus outputs standard

•2 fully programmable alarm relays & fail relay

•Non-intrusive calibration via magnetic wand

•H2 specific LEL version available

•Patented water repellent sensor coating

•User friendly setup push buttons & LCD menus

•IR Sensors available for LEL & CO2

RK-65-2610RK

M2 % LEL, Sensor / Transmitter W/ J-Box, UL Version

RK-65-2610RK-05

M2 % LEL, Sensor / Transmitter W/ J-Box, CSA Version

RK-65-2611RK

M2 % LEL, Hydrogen (H2), Specific Sensor / Transmitter W/ J-Box, UL Version

RK-65-2611RK-05

M2 % LEL, Hydrogen (H2), Specific Sensor / Transmitter W/ J-Box, UL Version

RK-65-2613RK-05

M2 Oxygen (O2), 0 - 25% Sensor / Transmitter W/ J-Box, Explosion Proof, CSA Version

RK-65-2615RK-05

M2 Hydrogen Sulfide (H2S), 0 - 100 ppm Sensor / Transmitter W/ J-Box, CSA Version

RK-65-2616RK-05

M2 Carbon Monoxide (CO), 0 - 300 ppm Sensor / Transmitter W/ J-Box, CSA Version

Measuring Ranges 0 - 100% LEL 0 - 25% Vol. 0 - 100 ppm 0 - 300 ppm

Outputs

Analog 4 - 20 mA signal, into 500 ohms impedance max, corresponding to 0 - full scale

Digital Modbus RTU output standard, fully configurable, 2-wire RS-485, 1200 to 19.2k baud

Alarm Settings Fully programmable alarm set points, increasing / decreasing, latching / self-resetting, on delays, off delays, normally energized or de-energized, programmable deadband, programmable smoothing filter

Alarm Indication

Visual LED’s. Alarm 1, Amber; Alarm 2, Red; Fail, Red Relays 5 amp form C contacts for alarm 1, alarm 2, and fail

Operating Temp. -4°F ~ 122°F (-20°C ~ 50°C)

Relative Humidity 5 - 95% RH non-condensing

Location Indoor or outdoor. Explosion proof for Class I, Div. 1, Groups B, C, and D.(Oxygen available in non XP version also)

Operating Voltage 19 V DC - 30 V DC

Approvals IR LEL sensors: C/US approval standard Catalytic LEL sensors: UL standard, CSA optional H2S and CO sensors: CSA

Warranty One year material and workmanship

Indoor Carbon Monoxide Gas Monitor

Features

• Compact, wall mounting design

• Highly visible 3 color LED digital display

• Power cable can enter from any direction

• Stores alarm summary data

• Built in audible and visual alarms

• 115 V AC operation

• Relay outputs for annunciation of alarms

• Low cost plug-in electrochemical sensor

Specifications

Measuring Range0 - 150 ppm (1 ppm / digit)

Display of Alarm

1st Alarm: Flashing orange LED gas display

AL1 LED orange color flashing, intermitted buzzer sound

2nd Alarm: Flashing red LED gas display

AL2 BED red color flashing, Intermittent buzzer sound

Trouble Alarm: Red flashing display "D-**" (**shows error No), short buzzer intermittent buzzer sound

Indoor Oxygen Monitor Model OX-500 also available. Please call for more information.

Toll free: 1-888-287-3732

RK-73-1201RK

Model EC-500 Controller & Detector For Carbon Monoxide (CO), 0 - 150 ppm

Wall Mount Controllers

Applications

Petrochemical plants, refineries, water & wastewater treatment plants, pulp & paper mills, gas, telephone, & electric utilities, parking garages, manufacturing facilities, steel, automotive, HVAC

BEACONTM 110

Features

• Low cost versatile solution

• Compact, weatherproof, NEMA 4X enclosure

• 115/220 V AC or 24 V DC operation

• Long life sensors (2+ years typical)

• Accepts RKI LEL/O2/H2S/CO direct connect sensors

• Accepts any 4 - 20 mA transmitter

• Audible alarm with reset button

• Two programmable alarm levels

• Built-in trouble alarm with relay

• Relay rating 10 amps, form C

• Provides 4 - 20 mA output

• Height: 8.5" (216 mm)

• Width: 7.0" (178 mm)

• Depth: 4.3" (109 mm)

BEACONTM 200

Features

•Simultaneous readout on 2 channels

•Two alarm levels per channel

•Discrete and common relays

•NEMA 4X enclosure

•4 - 20 mA outputs

•Proven, long-life sensors for a wide variety of gases

•Accepts any 4 - 20 mA transmitter input (24 V DC)

•Easy to install, operate and expand

•Height: 10.5" (267 mm)

•Width: 8.5" (216 mm)

•Depth: 6.3" (158 mm)

Partial List Of Detectable Gases

Ammonia (NH3) 0 - 75.0 ppm

Arsine (AsH3) 0 - 0.20 ppm

Boron Trichloride (BCl3)0 - 15.0 ppm

Carbon Dioxide (CO2)0 - 1.0%

Carbon Monoxide (CO)0 - 300 ppm

Chlorine (Cl2) 0 - 3.0 ppm

Chlorine Dioxide (ClO2)0 - 1.00 ppm

Chlorine Trifluoride (ClF3)0 - 1.00 ppm

Combustibles 0 -100% LEL

Diborane (B2H6) 0 - 30.0 ppm

Fluorine (F2) 0 - 6.0 ppm

Hydrogen (H2) 0 - 2,000 ppm

Hydrogen Chloride (HCl)0 - 15.0 ppm

Hydrogen Fluoride (HF)0 - 9.0 ppm

Hydrogen Sulfide (H2S)0 - 100.0 ppm

Nitric Oxide (NO) 0 - 100.0 ppm

Nitrogen Dioxide (NO2)0 - 15.0 ppm

Nitrogen Trifluoride (NF3)0 - 30.0 ppm

Oxygen (O2) 0 - 25.0%

Ozone (O3) 0 - 1.0 ppm

Phosphine (PH3) 0 - 1.0 ppm

Silane (SiH4) 0 - 15.0 ppm

Sulfur Dioxide (SO2) 0 - 30.0 ppm

Features

•Capable of up to 8 separate channels

•Digital display of all 8 channels simultaneously

•Compact, weatherproof, NEMA 4X enclosure

•85 - 264 V AC or 24 V DC operation

•Long life sensors (2+ years typical)

•Accepts any 4 - 20 mA transmitter

•Audible alarm with reset button

•Two programmable alarm levels per channel

•Common alarm and fail relays

•Relay rating 3 amps, form C

•Low cost versatile solution

•Height: 12.5" (318 mm)

•Width: 11.0" (279 mm)

•Depth: 6.4" (163 mm)

BEACONTM 800

Particle Counters

Particle counters are primarily designed for use in controlled environment applications. Particle counters detect and measure individual particles as small as 0.3 microns in diameter. Our particle counters contain various size discriminators and counting capabilities to provide hand held solutions for Clean Room Certification, Filter Testing, and Process Testing. A unique feature of all particle counters is their capability to measure particles in high concentrations. This feature is useful for a number of ambient monitoring applications.

Dust Monitors

Portable Dust Monitors are used in applications that require total amount of airborne particulate matter. Output is expressed in either micrograms per cubic meter or milligrams per cubic meter. Applications include from industrial hygiene, workplace monitoring, filter testing, and dust testing.

Calibration Gases

The Convenient and Cost-Efficient Way to Handle Calibration Gas Mixtures!

Nonrefillable Steel Cylinders

These smaller-sized, lightweight cylinders require no deposit or monthly rental charge. They are easier to handle, less expensive to ship, and use very little space. They also eliminate overpurchasing when only small quantities are necessary. These steel cylinders are recommended for non-reactive gas mixtures and pure gases such as argon, helium and nitrogen. They combine a convenient, portable size with a wide range of capacities to handle any field calibration requirement.

17 Liter Steel Cylinder

Contents: 17 Liters (0.6 cu. ft)

Pressure: 240 PSIG

Outlet: CGA 600

Weight: 1.1 lbs

Dimensions: 3" x 10 3/4"

D.O.T. Specs: 39 NRC

58 Liter Aluminium Cylinder

Contents: 58 Liters (2.0 cu. ft)

Pressure: 1000 PSIG

Outlet: C-10 (5/8"-18 UNF)

Weight: 1.5 lbs

Dimensions: 3 1/4" x 8”

D.O.T. Specs: 39 NRC

Offering

Bump Gas Cylinder

Used for Industrial Hygiene Bump Gas Mixtures

Contents: 11 Liters (0.4 cu. ft)

Pressure: 140 PSIG

Outlet: Trigger-style aerosol

Weight: 0.3 lbs

Dimensions: 2 7/8" x 12"

D.O.T. Specs: 39 NRC

NLB-H10135000PN

Carbon Dioxide 5,000 ppm, 34 Liter Steel Cylinder

NLB-H10132000PN

Carbon Dioxide 2,000 ppm, 34 Liter Steel Cylinder

NLB-H120815LA

Hexane 15% LEL, 34 Liter Steel Cylinder

NLB-H105510PA

Isobutylene 10 ppm, 34 Liter Steel Cylinder

NLB-H1055100PA

34 Liter Steel Cylinder

Contents: 34 Liters (1.2 cu. ft)

Pressure: 500 PSIG

Outlet: CGA 600

Weight: 1.4 lbs

Dimensions: 3" x 10 3/4"

D.O.T. Specs: 39 NRC

103 Liter Steel Cylinder

Contents: 103 Liters (3.6 cu. ft)

Pressure: 1000 PSIG

Outlet: C-10 (5/8"-18 UNF)

Weight: 2.3 lbs

Dimensions: 3 1/4" x 13 2/3"

D.O.T. Specs: 39 NRC

Portable Reactive Gas Cylinders

221 Liter Steel Cylinder

Contents: 221 Liters (7.5 cu. ft)

Pressure: 260 PSIG

Outlet: CGA 165 (1/4" SAE flare 45°)

Weight: 6.3 lbs

Dimensions: 9" x 16 1/2"

D.O.T. Specs: 39 NRC

These compact, lightweight aluminum cylinders are recommended for gas mixtures that are not stable in steel cylinders. Typical components blended in these packages include ammonia, chlorine, hydrogen sulfide, nitric oxide, nitrogen dioxide and sulfur dioxide. They are available in capacities from 11 liters (0.4 cu. ft) to 104 liters (3.7 cu. ft) and are conveniently transported in a carrying case or bag. They are nonrefillable, except the "3A" cylinder, which is a refillable package.

29 Liter Aluminium Cylinder

Contents: 29 Liters (1.0 cu. ft)

Pressure: 500 PSIG

Outlet: C-10 (5/8"-18 UNF)

Weight: 0.8 lbs

Dimensions: 2 7/8" x 11 1/2"

D.O.T. Specs: 39 NRC

Regulator: 500 series 6000 series & 8000 series

58 Liter Aluminium Cylinder

Contents: 58 Liters (2.0 cu. ft)

Pressure: 500 PSIG

Outlet: C-10 (5/8"-18 UNF)

Weight: 1.6 lbs

Dimensions: 3 1/2" x 14 1/2"

D.O.T. Specs: 39 NRC

Regulator: 500 Series 6000 Series & 8000 Series

NLB-H197150VN

Vol. Methane, 34 Liter Steel Cylinder

NLB-H197150LA

NLB-J1002

Customize your own Gas Mixture

Cylinder

Regulators for 17/34 L Steel Cylinders

Regulators are necessary equipment used to accurately deliver calibration from a cylinder to an instrument. Each regulator is designed to fit on a set of cylinders.  Most of the regulators are designed for non refillable cylinders. There are two common fittings these regulators use to connect to the cylinders. One common fitting is a CGA 600 connection and fits on the 17 & 34 liter steel cylinders.

Regulators for 29 AL / 34 AL / 58 AL Aluminum & 103 L Steel

The second common fitting is the 5/8 x 18 UNF fitting which connects to the 29, 34 & 58 liter aluminum cylinders and the 58 & 103 liter steel cylinders. Has a C-10 connection.

Making Sure the Regulator you Purchase Fits the Cylinder you Have

Accessories

Cases & Accessories

Our two, three, or four-bottle cases provide a safe and convenient method for transporting and storing your calibration standards

MONITORING

ENVIRONMENTAL

2100 Sound Level Meter

Typical Applications

•Occupational noise measurements

•Noise ordinance enforcement

•Community noise assessment

•Fire & emergency notification alarm testing

•Maintenance inspections & trouble-shooting

•Environmental impact studies

Features

•Certified Intrinsically Safe

Description

QUESTemp° 32 Portable HeatStressMonitor

Features

•Real-time readings for Wet / Dry Bulb, Globe, WBGT Indoor / Outdoor, Relative Humidity and Heat Index

•Optional remote sensors for up to (3) simultaneously monitored areas

Description

The rugged, easy to use QUESTemp° 32 Thermal Environment Monitor quickly and accurately evaluates the potential forindividuals to experience heat stress.

It combines WGBT index values with Relative Humidity measurements to calculate Heat Index. For remote applications the QT° 32 can be tripod mounted with the detachable sensor tethered at a distance up to 200 ft (60 m) from the main unit.

Standards / Approvals

Intrinsic Safety: UL/CSA Standards for Class I, Groups A, B,C & D; Groups E, F and G; Class. Temperature Code T3 and European Standards for EEX ia IIC, T3

QT-32

-5 to 100°C (23 to 212°F)

0 to 100%

Celsius and Fahrenheit Scales; Wet Bulb; Dry Bulb; Globe; WBGT Indoor; WBGT Outdoor; Relative Humidity; Heat Index

9 V disposable batteries (150 hrs), NiMH rechargeable option (300 hrs), AC power adapter

RTD Temperature Sensor, Capacitive Polymer Relative Humidity Sensor

Outputs

SLM Range Class/Type

The Precision the Type 2 (2100) models are enhanced basic sound level meters. Enhancements include a broader sound level measurement range, the addition of "C" weighting, and optional detachable microphones with 100 ft (30 m) cables. QT-2100

QT-2100

AC/DC recorder output

A, C

Fast, Slow

30 to 140 dBA

Type 2

SPL, Lmax ANSI S1.4, IEC 60651, IEC 61672-1, CE Mark, ETL Instrinsic Safety Approval, CSA Intrinsic Safety Approval

Remote microphone optional

Adapter & QT-59-533 Storage Case

Features

•30 to 140 dBA measurement range

•Fast, Slow, Peak and Impulse response modes

•"A", "C" and "Z" (linear) weighting modes

•Selectable 3 and 5 dB exchange rates

•Displays SPL, Leq, Run Time, Maximum SPL

Minimum SPL & % Overload

•Low battery indicator

•Simple one-button field calibration

•Optional detachable microphone

•Optional 2, 10 & 50 ft (0.6, 3 & 15 m) microphone extension cables

•RFI shieldedconstruction

•AC/DC output jack for recorders

•Certified Intrinsically Safe

Measurement Range

30 to 140 dBA

40 to 140 dBC

43 to 143 dBPk

QT-2200R Model 2200R Remote Integrating Sound Level Meter Includes Meter, WS-7 Windscreen, QT-56-990 Calibrator Adapter & QT-59-533 Storage Case

QT-2200R-10 Model 2200R Sound Level Meter Kit Includes 2200R SLM W/ Accessories, QC-10 Calibrator & QT-59-533 Storage Case

QT-2200 Model 2200 Integrating Sound Level Meter Includes Meter, WS-7 Windscreen, QT-56-990 Calibrator Adapter & QT-59-533 Storage Case

QT-2200-10 Model 2200 Sound Level Meter Kit Includes 2200 SLM W/ Accessories, QT-QC-10 Calibrator & QT-59-533 Storage Case

Noisepro

Features

•Up to 2 independent dosimeters in one

•Optional vibrating alarm

•Class/Type 2 accuracy

•Programmable twice daily or (1) one time scheduled runs

•Optional QuestSuite® Professional II with virtual docking station

•Real-time compliance indicator

•English, Spanish, German, French, and Italian languages

•Optional boom microphone

•Microphone removal detection

•IP-65 rated, industrial grade cast aluminum case

•High-Speed infrared RS-232 communications

QT-NP

NoisePro Noise Dosimeter Includes NoisePro Dosimeter W/ Class 2 Pendant Microphone, QT-53-384 Windscreen, QT-53-884 Calibrator Adapter & QT-53-879 Storage Case

QT-NP10

NoisePro Dosimeter Kit Includes NoisePro Dosimeter W/ Accessories, QT-53-857 IR To RS-232 Computer Interface Cable, QT-QC-10 Calibrator & QT-53-879 Storage Case

This Kit Includes Accessories Necessary To Connect NoisePro To Computer QT-RS-232 9-pin DIN Port. Order Part Number QT-53-810

QT-RS-232 Serial to USB Adapter Separately To Connect To Computer USB Port

QC-10 Calibrator

The QC-10 Calibrator provides quick, precise field calibration. The calibrator generates a stable acoustic signal at a controlled frequency and amplitude to verify the accuracy of your meter in the field. The QC-10 is a general purpose calibrator that generates a constant sound pressure level of 114 dB at a fixed frequency of 1,000 Hz.

QT-QC-10 Sound Calibrator W/ Single Output (114 dB at 1000 Hz)

Note: Calibrator Adapter Is Provided With The Meter When Purchased. If Purchasing A Calibrator Only, The Appropriate Calibrator Adapter Needs To Be Purchased Separately

Digital Sound Level Meter

Features

•Analog bargraph with 50 dB range

•Updates every 40 ms for viewing trends

•± 2 dB accuracy with 0.1 dB resolution

•A&C weighting

•AC analog output

•Record Max/Min values over time

•Auto Power Off and Max Hold functions

•Utilizes 0.5" (12.7 mm) condenser microphone

•Tripod mountable

•40 to 130 dB measuring range

•Fast/Slow response time

•Tripod mountable

•Complete with 4 "AAA" batteries and microphone

windscreen

Applications

•Monitoring workplace machinery

•Installing audio and alarm systems

•Product noise certification and reduction

EX-407730

Digital Sound Level Meter

EX-407730-NIST

EX-407730 W/ NIST Certificate

Data Logging Sound Level Meter

High accuracy datalogging of up to 20,000 records. Meets ANSI and IEC61672-1 Type 2 standards

Features

•Three ranges from 30 to 130 dB

•Datalogging capability up to 20,000 records

•Capture up to 10 readings/sec whenconnected to a PC

•Records readings with real date and time stamp

•Min/Max and Data Hold functions

•Heavy duty rugged double molded housing

•USB port includes software

•Auto Power Off with disable capability

•Includes Windows® compatible software, USB cable, wind cover, tripod, hard carrying case, AC adaptor, and 9 V battery

Sound Level Alert with Alarm

Built-in LEDs alert user when sound level is too high or too low. LED’s can be read from 30 m (100 ft)

Features

•Continuous monitoring of sound level

•Ideal for industrial, hospital, auditoriums, schools and other areas where there is a need for being alerted when sound level reaches set point

•Meets ANSI Type 2 and EN 60651 accuracy, specs compliant to OSHA

• User settable high or low limit (30 to 130 dB) indication with output to drive external relay module

•Wall, desk or tripod mount

•Microphone rotates 180° for desired placement. Optional 15 ft (5 m) microphone extension cable for remote monitoring

•Complete with AC adaptor, microphone wind cover, wall, desk or tripod mount (optional Tripod TR100)

EX-SL130G

Sound Level LED Alert, 110 V AC Adaptor

EX-SL130G-NIST

SL130G W/ NIST Certificate

EX-SL130-240

Sound Level Alert (W/ 240 V Adaptor)

EX-SL123

AC Alarm Relay Module 9 Foot Cable (3 m)

EX-SL124

DC Alarm Relay Module 9 Foot Cable (3 m)

EX-SL125

Remote Microphone Cable 15'

EX-TR100

Tripod (For Meters With Tripod Mount Feature)

EX-407766

Sound Level Calibrator, 94/114 dB

10.9" x 3" x 2" (278 x 76 x 50 mm)

12.3 oz (350 g)

Specifications

EX-SL130G

4.6" x 3.125" multifunction LCD

31.5 Hz to 8 kHz

0.5" Electret Condenser Microphone (remoteable) 30 to 80 dB, 60 to 110 dB, 80 to 130 dB

"A" and "C" (programmable)

Fast (125 ms) / Slow (1 s) (programmable)

0.1 dB

3.5 mm Mono Phone Plug, Maximum: 3.4 mA @ 5 VDC

Voltage: 2.5 VDC

AC/DC Adaptor for full functions; 8 x "AA" batteries for monitoring function only without LED alert

CE approved / 1 year warranty

8.75" x 7.1" x 1.25" / 0.63 lbs (22 x 18 x 3.2 mm / 285 g)

Heavy Duty Light Meters

Datalogging Model Available. Automatically stores up to 16,000 readings or manually store/recall up to 99 readings.

Features

•Wide range to 40,000 Fc or 400,000 Lux

•Cosine and color corrected measurements

•Utilizes precision silicon photo diode and spectral response filter

•Peak mode (10μS) captures highest reading

•Relative mode indicates change in light levels

•Min/Max and Data Hold

•Large backlit LCD display with 40-segment bar graph

•Heavy Duty rugged double molded housing

•Built-in USB port

•Includes light sensor with 3 ft (1 m) cable and protective cover, Windows® compatible software with USB cable, hard carrying case, and 9 V battery

SpecificationsEX-HD400

40, 400, 4000, 40.00 kFc

400, 4000, 40k, 400 kLux

± 5% rdg

0.01 Fc / 0.1 Lux

16,000 continuous readings;

99 selected readings

USB

6.7" x 3.1" x 1.6" (170 x 80 x 40 mm)

13.7 oz (390 g)

FL-K1 Redesigned Swiss-made Flowmeter Kit

This is a water and air flow measuring tool for professionals in the field. Measures water flow in rivers, streams, irrigation canals, ocean flows and sewage flows. Measures airflow in ventilation shafts, air conditioning conduits, chimney flues and air ducts.

Features

•Measures fluid flow and temperature

•Fluid speed in all measurement units (mph, km/h, m/s, knots)

•Current, maximum and average fluid speed

•Current, minimum and maximum temperatures; Wind chill temperature (when appropriate)

SpecificationsST-FL-K1

± 2% fluid speed, ± 2% on axis air velocity; ± 3% off axis

± 1°F (± 0.2°C)

0.2 to 40 mph (0.1 to 18 M/Sec) depending upon impeller,

Temperature: -58° to 212° F (-50° to 100°C)

0.3 km/h; 0.2 mph; 0.2 knots; 0.1 M/Sec

Minimum, maximum, current temperature, wind chill factor

Current, maximum and average fluid speed Knots, mph, km/h, m/s, fps, cm/s, °F or °C

2 "AA" Batteries (included)

5.25" x 2.25" x 2.5" (62 x 32 x 120 mm), case: 25" x 13" x 3" (63 x 34 x 9 cm)

8.1 oz (230 g), components plus case: 6 lbs (2.7 kg)

•2 meter carbon rod telescopes for easy storage

•Magnetic material in the propeller conducts impulses through the cable to the head unit providing a digital readout

•The end of the rod near the impeller houses a thermometer for true fluid temperature

•Includes a 25 mm air impeller and 60 mm water impeller; other impellers available

•Backlight

•Weatherproof & water resistant

•Display threaded for tri/unipod

•1 year warranty

ST-FL-K1 Flowmeter Kit

EX-HD450

EX-HD400

ST-SM-28 Skymaster Wind/Weather Meter with Barometer, Humidity, Dew Point & More

Skymaster allows you to track weather in the palm of your hand! Radio / TV reports cover a large area, but Skymaster's data is specific to your location. Unlike other units, the jackknife case gives you the most accurate measurements; your hand's heat/moisture won't influence the environmental sensors. The Honeywellhumidity sensor and the Swiss-made barometer can be easily re-calibrated, and the unit has a weather alert if the barometric pressure rises or falls 6 millibars over 3 hrs. Skymaster has a tripod fitting, is water resistant and floats.

ST-SM-28 Skymaster Weather Meter

ST-AP-22 Optional Carry-Along Case

ST-WM-350 WindMate™ Multi-function Weather Meter

Features

•Time and date

•48 hr history for all functions

•Swiss-made impeller components and current, avg, max wind speed

•USA made fluxgate compass and use as bearing compass

•Digital wind direction, crosswind and head/tail wind calculations

•Lifetime calibrated Swiss-made humidity sensor

•Temperature, wind chill, wet bulb, dew point and delta T

•Swiss-made barometer sensor, weather forecast and audio storm alarm

•Altimeter to 29,000 ft and density altitude

•Exclusive accuweather.com® patented comfort index & trade

•Auto Shutoff can be disabled

•Threaded for tripod mounting, EL backlight and water / shock resistant

Waterproof Thermometer

Pocket size with Max/Min recording. Measures temperature in frozen solids and liquids.

ST-WM-350 WindMate™

ST-AP-22 Optional Carry-Along Case

ST-SM-18

Wind ± 3% when aligned with winds axis; Temp / Windchill ± 2° F; Relative Humidity ± 3%; Dewpoint / Heat Index ± 3° F; Barometer ± 3 hPa

Wind .4 - 89 MPH; Temp +5° to +122°F; Windchill -22° to +158°F; Relative Humidity 0 - 99%; Dew Point 31.2° to +155°F; Heat Index +69° to 155°F; Barometer 400 to 1100 hPa; Altitude -900 to 9000

Current wind 2 sec avg.; Avg wind over 5 sec; Max wind 2 sec gust; Temp/Windchill/Humidity/Dew Point 1 min; Barometer samples every 2 sec

Knots, MPH, KPH, Ft/Min, M/Sec, Beaufort, °F or °C in Hg (inches of Mercury) or hPa (hectopascal/millibars)

CR 2032 Lithium battery (included)

5.9" x 2.1" x .85"

3.9 oz

ST-WM-350

Wind ± 3% when aligned with winds axis; Compass ± 2; Temp/Wind chill ± 2°; Relative Humidity ± 3%; Wet bulb/Dew point ± 3.6°; Barometer ± .05 inHg; Altimeter ± 50 ft; Density Altitude ± 246 ft

Wind .8 - 89 MPH; Temp -20° to 158°F; Windchill -50° to +50°F; Compass 0° to 360°; Relative humidity 5% to 95%; Wet bulb 32° to 100°F, Dew point -20° to 158°F; Barometer 8.86 to 32.48 inHg; Altimeter 6000 to 29,000 ft; Density altitude -49 to 257 ft

Current & maximum wind 1 sec; Avg wind over 10 sec; Temp 1 minute; Windchill 1 sec; Wind direction & compass 1 sec; Cross/head/tail wind 5 sec; Relative humidity, wet bulb, delta T, dew point 1 minute; Barometer 2 sec; Altimeter 1 sec; Optional Units: Knots, MPH, KPH, FPM, M/Sec, Beaufort, InHg or hPa; °F or °C, ft or meters CR 2032 Lithium battery (included)

5.5" x 1.75" x .75" (closed), 9" x 1.75" x .75" (open)

3.6 oz (with battery)

Features

• 2.75" (70 mm) stainless steel stem

• °C/°F switchable ranges of -40 to 392°F (-40 to 200°C)

• MAX/MIN recall of high and low temperatures

• Data Hold and Auto Power Off features

• Digital display with 0.1° resolution

•Dimensions: 5.9" x 0.8" x 0.7" (150 x 20 x 18 mm)

• Weight: 0.7 oz (20 g)

• Complete with one LR44 button battery and protective cover

EX-39240 Waterproof Thermometer

ST-SM-18 Skymate Wind Meter with Temperature & Wind Chill

Features

•Current, maximum windspeed

•Average wind speed over5, 10, or 13 seconds

•Current temp & wind chill

•Choose any measurement unit

•Reads in tenths

•Replaceable 400 hour lithium battery

•Data lock feature

•Replaceable plastic impeller won't corrode

•Easy to read LCD

•Threaded for tripod mounting

•Unique pocket-knife design to protect unit when not in use

•Water resistant to 3 ft

•High visibility case

•Floats

•1 year warranty

ST-SM-18

Skymate Wind Meter

ST-AP-22

Optional Carry-Along Case

GW-RG200 6" & GW-RG600 8" Rain Gauge

Features

•Simple to operate and install

•Rugged design for harsh weather

•Mounting hardware included

•UV-protected plastic or aluminum

The GW-RG200 6" Rain Gauge is constructed of high impact UVprotected plastic to provide reliable, low-cost tipping bucket rainfall monitoring. The simplicity of the rain gauge design assures trouble-free operation, yet provides accurate rainfall measurements. The unit has a 6" orifice and is shipped complete with mounting brackets and 50' of twoconductor cable. The tipping bucket sensor mechanism activates a sealed reed switch that produces a contact closure for each 0.01" or 0.2 mm of rainfall.

The GW-RG600 8" Rain Gauge was designed by the National Weather Service to provide a low-cost, reliable, industrial, tipping bucket rain gauge. The rainfall gauge has an 8" orifice and is shipped complete with mounting brackets and 50' of two-conductor cable. The tipping bucket sensor mechanism activates a sealed reed switch that produces a contact closure for each 0.01", 0.2 mm or 1 mm of rainfall. The rain gauge sensor can be pole mounted or bolted to a level plate.

GW-RG200

6" Rain Gauge

GW-RG600

8" Rain Gauge

Specify 1 mm, 0.2 mm, Or 0.01" Per Tip At Time Of Order

GW-RG700

4 - 20 mA Converter Module Pulse To Current Converter, 32 Pulses Per Minute Equals 20 mA

ST-SM-18

Wind ± 3% when aligned with winds axis; Temp/Windchill ± 2°

Wind .4 - 89 MPH; Temp +5° to +122°F; Windchill -22° to +158°F

Current wind 2 sec avg; Avg wind over 5 sec; Max wind 2 sec gust Temp/windchill 1 minute

Knots, MPH, KPH, Ft/Min, M/Sec, Beaufort °F or °C

CR 2032 Lithium battery (included)

4.8" x 1.8" x .7"

2.3 oz with case

GW-RG600 8" Rain Gauge

32° to +123.8°F (0° to +51°C)

25 ft (7.6 m), 2 conductor

10 1/8" x 8" (26 x 20 cm)

8 lbs (3.6 kg)

InfraRed Thermometer

Non-contact InfraRed Thermometer with laser pointer. Measures to 600°F without contact.

Features

•Large LCD display with backlighting

• Built-in laser pointer to improve aim

• °F / °C switchable

• Fixed emissivity (0.95) covers 90% of surface applications

• Narrow field of view

• Audible and visible overrange indicators

• Automatic Data Hold

• Pocket size meter

• Complete with 9 V battery and carrying case

Dual Laser InfraRed Thermometers

Features

•Dual laser for accurate target

•White backlit dual LCD display

•Fast 0.15 second response time with Max display

•Adjustable emissivity increases measurement accuracy for different surface

•Adjustable High / Low set points with audible alarm alerts user when temperature exceeds the programmed set points

•Lock function for continuous readings

•Double molded housing

•Complete with carrying case and 9 V battery

EasyView™ Hygro-Thermometers

Relative Humidity, Temperature, Dew Point, and Wet Bulb measurements with choice of Datalogger model.

Features

•Compact and rugged design features large display and bargraph

•Display any two parameters (Temperature and Humidity or Dew Point, or Wet Bulb) simultaneously

•Min / Max function stores & recalls highest and lowest readings

•Timer function displays the elapsed time (mins: sec and day: hour) to the minimum and maximum readings

•Programmable auto power off time frame

•Remote capacitance sensor with 39" (1 m) coiled cable

•Switchable °C / °F temperature units

•Data Hold function freezes reading on display

•Auto Power Off to save battery life

•Low battery and overrange indication

•Complete with built-in stand, protective holster, probe and 6 "AAA" batteries

Model EX-EA25 Additional Features

•Datalogs up to 15,000 records plus automatic timer function

•Built-in RS-232 PC serial interface comes complete with Windows® 95/98/NT/2000/ME/XP compatible software and optically isolated RS-232 cable

•Monitor Relative Humidity and Temperature in factories, clean rooms, offices, and greenhouses

•Produce reports of overnight or long term humidity and temperature fluctuations

W/ NIST Certificate EX-EA25 EasyView Hygro-Thermometer Datalogger

W/ NIST Certificate

HT-3000 Thermo-Hygrometer

Help control the effects of temperature and humidity in the environment. The HT-3000 is the only meter available at its price point that provides Temperature, RH, Dew point and Specific Humidity.

Features

•Selectable display screens

•Relative humidity range: 0 - 100 % with up to ± 3% accuracy

•Temperature range: -4°F to 128°F (-20°C to 70°C) with up to 1.8% accuracy

•Dew point range: -40°F to 176°F (-40°C to 80°C)

•GPP (grains per pound) range: 0.55 gpp to 3868 gpp

•Fast response time

Humidity and Temperature USB Datalogger

Records up to 16,000 readings for each parameter.

Features

•Datalogs 32,000 readings (16,000 for each parameter: Humidity / Temperature)

•Dew point indication via Windows® software (included)

•EX-RHT10-SW optional software to calculate Grains per Pound (grams per kilogram) to 1120 GPP (160 g/kg)

•Selectable data sampling rate: 2 sec, 5 sec, 10 sec, 30 sec, 1 min, 5 min ,10 min, 30 min, 1 hr, 2 hrs, 3 hrs, 6 hrs, 12 hrs, 24 hrs

•User-programmable alarm thresholds for RH and Temperature

•Status Indication via Red / Yellow LED and Green LED

•Long battery life (approx. 1 year)

•Complete with 3.6 V Lithium battery and Windows® 98, 2000, XP, and Vista compatible analysis software

•Temperature: Reaches 80% of full excursion in approximately 75 sec

•Relative Humidity: Reaches 90% of full excursion in approx imately 45 sec

•Data hold feature

•Graphic display with contrast and backlight

•Automatic power down

•9 V battery

•1 year warranty

•Carrying case

DEL-HT-3000W/CS

Thermo-Hygrometer W/ Carrying Case

EX-RHT10-SW

GPP (g/kg) Software For EX-RHT10

EX-42299

3.6 V Lithium Batery, 2/Pack

Hygro-Thermometer Humidity Alert with Dew Point

NIST Calibrateable and Programmable Alarms. Warning of High or Low Humidity Conditions. EX-445815 Humidity

Features

SpecificationsEX-445815

•Large, easy-to-read triple LCD displays % Relative Humidity, Temperature and Dew Point

•% RH audible and visual alarms, with adjustable set points, alert when humidity exceeds set limit

•Probe clips onto meter or extends on 18" (457 mm) cable

•Max/Min with Reset function

W/ Dew Point

EX-445815-NIST

EX-445815 W/ NIST Certificate

EX-445815-NISTL

Optional Limited NIST

EX-RH300-CAL Optional 33% & 75% RH Calibration Standards

•Rear calibration adjustment pot for Humidity and Temperature (available with NIST certification and optional Calibration Standards)

•Complete with built-in stand, wall mount bracket, remote sensor and 2 "AAA" batteries; Optional calibration salt bottles ModelEX-445580-C

Radio Controlled Wall Clock Hygro-Thermometer with Super Large 4.3" (109 mm) Digit Clock Display

Features

•Receives Time Code from NIST Radio Station WWVB (North American region)

•Large LCD displays Time, % RH, Temperature, Year, Month, Date, and Day

•Super large 4.3" (109 mm) digit clock display can be viewed from 150 feet (45 mm)

•Signal indicator displays signal strength in 3 levels to indicate successful synchronization

•Automatically adjusts for daylight savings time (DST)

•Alarm clock

•Built-in stand for desktop or wall-mount

•Complete with built-in stand and four "AA" batteries

Soil / Compost Thermometer

Compost Thermometer is ideally suited for monitoring interior temperatures of compost piles and windrows. The clear, easy-to-read dial, with the pointer directly driven by the sensitive bi-metal helix in the bottom of the stem, gives an accurate reading every time. Used by composters everywhere for waste disposal, recycling, mushroom growing, etc.

Features

•Rugged all stainless construction

•Hermetically sealed-will not fog

•Unbreakable plastic crystal

•Pointed stem for easy insertion

•Easy-to-read 3" diameter dial

•Very accurate (+1% of scale)

•ºF, ºC, or Dual scales available

•Regular 1/4" diameter stem or Heavy Duty

•5/16" diameter stem available

Diameter, 60" L Stem

REO-A72PF

Heavy Duty 5/16" Diameter, 72" L Stem

REO-A24FR

Fast Response 3/8" Diameter, 24" L Stem

REO-A36FR

Fast Response 3/8" Diameter, 36" L Stem

REO-A48FR

Fast Response 3/8" Diameter, 48" L Stem

REO-A60FR

Fast Response 3/8" Diameter, 60" L Stem

REO-A72FR

Fast Response 3/8" Diameter, 72" L Stem

A Complete Solution for the Restoration Contractor

Restoration Contractor’s Kit

Use pin and pinless meters to better diagnose the amount of moisture content in buildings. Thermal Hygrometer provides fast, accurate readings of ambient room conditions and GPP calculations.

Kit includes

•Model EX-MO280 Pinless Moisture Meter

-Select from 10 different wood types

-Displays % moisture from 0 to 99%

-Measurement depth to 0.75" (22 mm) below the surface

•Model EX-MO220 Wood Moisture Meter

-Memory contains 8 wood groups with calibrations for approximately 170 species of wood

-Measures wood moisture from 6 to 99.9%

-Measurements can be taken using the integral pin electrodes or a heavy duty remote probe (included)

•Model EX-RH490 Precision Hygro-Thermometer

-Measures Temperature, Humidity, Dew Point, Wet Bulb, Absolute Humidity, GPP (grains per pound/grains per kilogram)

-Less than 30 second RH response time with 2% RH accuracy

•Model EX-RHT10 Humidity/Temperature USB Datalogger

-Datalogs 16,000 RH and 16,000

Temperature readings

-User-programmable sampling rate and alarm thresholds

-EX-RHT10-SW software included for GPP calculations and USB interface for data download

•Kit is supplied in a rugged heavy duty hard carrying case that provides protection and organization for the meters and accessories whenever they are needed

EX-MO280-RKv

Restoration Contractor’s Kit

Best Selling Moisture Meter!

BD-2100

BD-Series pin-type moisture meters - ideal meter to measure wood and other building materials, such as concrete, sheetrock, EIFS, roofing, insulation and flooring. Choose from the analog BD-10 meter or the digital BD-2100 meter. Each model offers a scale that measures % MC on wood from 6% - 40% and a reference scale used to measure non-wood materials. The BD-2100 also features the industry exclusive sheetrock scale to measure % MC in sheetrock over the range of 0.2% - 50%.

DEL-BD-2100/PKG

Includes BD-2100 W/ Case, 21-E Electrode

DEL-BD-2100/26/PKG

Includes BD-2100 W/ Deluxe Case, 26-ES Electrode, (10) 496 Pins

DEL-BD-2100/26/21/PKG

Includes BD-2100 W/ Case, 26-ES, 21-E Electrodes, (10) 496 Pins

DEL-BD-2100/EIFS/PKG

Flexible Borescope

Features

•High resolution image (7400 pixels) and optical system

• Easy to use eyepiece and handle

• Focus adjustment

•Two bright LED lamps to illuminate viewed object

•Glare-free close-up and wide angle field of view

•3 position switch (low-off-high)

•Flexible gooseneck with min. 3" (7.62 cm) bend radius retains configured shape

•Removable 90 degree side viewing adaptor rotates 360 degrees

•HDPE-coated shaft can be exposed to water, diesel, gasoline, brake fluid, antifreeze, oil and other liquids

•Accessory clip-on magnet will pick up approx. 0.25 lbs (113 g)

•Complete with 4 "AA" batteries, Clip-on 90 degree mirror, magnetic clip, and storage case

Video Borescope/Wireless Inspection Camera

•Captured video with date / time stamp can be played back on the wireless monitor or on any monitor with a video input jack

•Video and images can also be transferred to your PC via the microSD card (with included SD adaptor) or USB cable (included) and viewed using Windows® Multimedia Player

•Mini water-proof (IP67) camera for high resolution viewing

•Two bright LED lamps with dimmer toilluminate viewed object

•Glare-free close-up field of view

•39" (1m) flexible gooseneck retains configured shape

Applications

Includes BD-2100 W/ Case, 21-E Electrode, (2) BD-608-001 Pins, HP-1 Hole Punch Features

•Home inspection: Inspect in walls for mold, insect infestation, electrical wire or water pipe location

•HVAC: Inspect inside ducts, behind motors and compressors

• Automotive: View inside or around engines and transmissions

•Government: Safety and security inspections

•Industrial: Inspect weld integrity, process equipment, gears, molding machines

•Aerospace: Aircraft inspections for contamination, debris, cracks or other damage

SpecificationsEX-BR146

3.5" Color TFT LCD Wireless Monitor with a 2 GB microSD memory card for capturing images (JPEG) or video (AVI) for viewing on your PC.

Telescoping AC Current Detector

Features

•Non-Contact Detection of AC Current in shielded wires, wires behind walls, metal circuit breaker and junction boxes

•Telescoping probe extends to reach distance of 39" (1 m)

•Sensitivity from 200 mA to 1000 A (50 / 60 Hz)

•Red and Green LED indicators and switch-controlled ON / OFF Audible beeper

•Sensitivity adjustment increases or reduces sensor trigger threshold

•Dimensions: 7.7" x 2.4" x 1.2" (195 x 62 x 30 mm) Weight: 5.2 oz (148 g)

•Complete with two LR44 button batteries

Industrial MultiMeters

Features

•Double molded for waterproof (IP67) protection

•Rugged design — drop proof to 6 feet

•High Resolution display: Model EX-EX520-S with 6000 count LCD display Model EX-EX530-KIT with 40,000 count LCD display

•1000 V input protection on all functions

•Dual sensitivity frequency functions

•Large backlit LCD with bargraph

• Duty Cycle function and Diode open circuit voltage of 2.8 V DC

•Auto power off with disable feature and Min / Max, Relative, and Data Hold functions

•CE / UL approved; CAT IV-600 V

Phase Rotation / Clamp Meter Test Kit

Kit Includes

•Model EX-MA640 - 600 A True RMS 6000 count AC / DC Clamp-on MultiMeter with built-in non-contact AC Voltage Detector, test leads and temperature probe; ETL approved

•Model EX-480400 - 3-Phase Rotation Tester with multiline LCD display, durable double-molded housing, and easy-to-open wide-jaw alligator clips

•Model EX-DV25 - Dual Range AC Voltage Detector (24 to 1000 VAC/ 100 to 1000 VAC) + Flashlight with Audible / Visual indication, doublemolded housing, and CAT IV-1000 V safety rating; UL listed

•Set of double molded professional test leads

• Type K thermocouple bead probe and Type K to Banana Input Adaptor

•Supplied in a soft carrying case that provides protection and organization for the meters whenever they are needed

•Dimensions: 9.8" x 8" x 2" (248 x 203 x 54 mm); Weight: 1.3 lbs (590 g)

EX-MA640-K Phase Rotation/Clamp Meter Test Kit

Digital Mini Microscope

Features

•1.8" TFT Color LCD Screen with 2 MB Memory

•7x to 108x magnification range

Optical Zoom: 7x to 27x

Digital Zoom: 4x

•Four white LEDs with adjustable brightness for object illumination

• 5 Image Effect modes: Normal, Gray, Inverse, Emboss, and Dual Window View

•Dual Window View simultaneously displays the magnified image next to the original image

•Real-time imaging on your PC screen via USB interface and included software

•Includes microscope stand for hands-free viewing

•Dimensions: 4.7" x 2.2" x 0.8" (120 x 56 x 20 mm)

Weight: 2.5 oz (70 g) without batteries

•Complete with stand, three "AAA" Ni-MH rechargeable batteries, 100 to 240 VAC (50 / 60 Hz) adaptor / charger, Windows® compatible PC software with mini USB cable, cleaning cloth, and wrist strap

Combustible Gas Detector

Features

•Quickly identifies and pinpoints gas leaks

•16"(406 mm) flexible gooseneck

•For easy access into hard to reach locations

•High sensitivity

•One hand operation with thumb controlled sensitivity adjustment, to eliminatebackground gas levels

•Visible and audible alarm at 10% (LEL)

•Lower Explosive Limit for methane

•Locate the smallest leaks

•Complete with 3 "C" batteries

Gas Detected

Natural Gas, Methane, Ethane, Propane, Butane, Acetone, Alcohol, Ammonia, Steam, Carbon Monoxide (not to quantify), Gasoline, Jet Fuel, Hydrogen Sulfide, Smoke, Industrial Solvents, Lacquer Thinner, Naphtha

Desktop Indoor Air Quality CO2 Monitor

Measures Carbon Dioxide (C02), Air Temperature and Humidity.

SpecificationsEX-CO200

Features

•Checks for Carbon Dioxide (CO2) concentrations

•Maintenance free NDIR (non-dispersive infrared) CO2 sensor

•Indoor Air Quality displayed in ppm with Good (380 to 420 ppm), Normal (<1000 ppm), Poor (>1000 ppm) indication

• Visible and Audible CO2 warning alarm with relay output for ventilation control

•Measurement ranges: CO2: 0 to 9,999 ppm

Temperature: 14 to 140°F (-10 to 60°C)

Humidity: 0.1 to 99.9% RH

•Displays Year, Month, Date, and Time

•Max / Min CO2 value recall function

•Automatic Baseline Calibration (minimum CO2 level over 7.5 days) or manual calibration in fresh air

•Complete with Universal AC adaptor

SpecificationsEX-EZ40

EX-MC108 Digital Mini Microscope

EX-EZ40 EzFlex™ Combustible Gas Detector

EX-EZ40: EzFlex™

Surface Test Kits

These Instant Surface Testing Swabs help to alert the user to the presence of hazardous levels of the metal so that proper precautions can be taken to avoid the harmful effects. Each swab represents a complete unit for detection.

Choose From

Swab: potential sources

Lead Check: painted surfaces, steel structures, soil, dust, antiques, plumbing, dinnerware, food cans, waste material, etc.

Mercury Check: manufacture of pharmaceuticals, dyes, embalming, wood preservation, disinfectants, dry batteries, and photographic processing

Cadmium Check: glazed ceramics, pottery, decorated glassware, dust solder, and any solid surface

Chromate Check: cooling towers, water plants, plating operations, tanning industry, paint pigments

Nickel Check: metal plating, jewelry, nickel dust and fumes

RF EMF Strength Meter

Features

•For electromagnetic field strengthmeasurement including mobile phones, cell phones, base stations, and microwave leakage

•Non-directional (isotropic) measurement with three-channel (triaxial) measurement probe

•Max Hold and Average functions

•Manual store/recall up to 99 sets

•Level exceed audible alarm with userselectable threshold

•Complete with 9 V battery and carrying case EX-480836 RF

Magnetic Locator

SCH-GA-92XTi & SCH-GA-92XTd

One hand operation makes finding faster, providing both audio and visual (XTd model) indication of ferrous objects up to 16 feet underground. And the new XT follows the Schonstedt tradition of ruggedness and reliability.

Detect the magnetic fields of all ferromagnetic objects property markers, manholes, septic tanks, well casings, valve boxes, cast iron pipes, steel drums, unexploded ordinance up to sixteen feet below the surface.

Stopwatch / Clock

Features

•Digital LCD Stopwatch plus Calendar and Alarm

•12 or 24 hr clock operation

•Stopwatch/Chronograph mode with 1/100 sec resolution

•Programmable alarm with an hourly chime

•Calendar displays day, month, and date

SCH-GA-52CX & SCH-GA-72CD Underground Locators

Easy-To-Use

The SCH-GA-52CX and SCH-GA-72CD locators find iron and steel objects underground. Both provide audio detection signals that peak in frequency when the locator’s tip is held directly over the target.

The SCH-GA-72CD includes an easy-to-read digital and bar graph display showing signal strength and polarity.

All Purpose SCH-MAC-51BX Magnetic and Dual-Frequency Pipe and Cable Locator

In the LO and HI modes, the receiver's audio signal provides a sharp null when its tip is directly over the target. In the MAG mode (no transmitter required) the audio signal peaks when the receiver's tip is over a ferrous target. You can trace the 571 Hz LF signal conductively applied to any continuous metal conductor up to 4000 ft.

Specifications SCH-GA-52CX SCH-GA-72CD

Tone frequency varies Tone frequency varies with gradient field intensitywith gradient field intensity (*)

N/A Digital readout and bargraph indicate polarity and relative strength of magnetic field

Analog

Battery Life

Battery Indicator

Weight

Operating Temperature

Overall Length

Waterproof Length

Sensor Spacing

Housing Material

N/A Yes

5 settings 4 settings

2 Alkaline 9 V batteries2 Lithium 9 V batteries

40 hrs (intermittent usage) 60 hrs (intermittent usage)

N/A 4-segment LCD

~ 2.5 lbs (1.13 kg)~ 2.6 lbs (1.18 kg)

-13 to 140°F ( -25 to 60°C)-13 to 140°F ( -25 to 60°C)

42.3" (107.4 cm) 34.5" (87.6 cm)

34.5" (87.6 cm) 21" (53.3 cm)

20" (50.8 cm) 14" (35.6 cm)

Aluminum Polycarbonate / ABS Blend

Specifications

Operating Voltage

Battery Life

RF Output

Audio Indicator

Weight

Operating Temp.

Overall Size

Specifications

Operating Voltage

Battery Life

Audio Output

Weight

SCH-MAC-51BX Transmitter

12 V (8 alkaline C-Cell batteries)

60 hrs (on & off usage @ 70°F)

82.5 kHz modulated at 382 Hz, pulsed at 4.4 Hz

571 Hz Pulsed at 4.4 Hz

2.58 kHz pulsed at 4.4 Hz

Approx. 5.5 lbs (2.5 kg)

-13°F to 140°F (-25°C to 60°C)

43.5" x 7" x 5" (110.5 x 17.8 x 12.7 cm)

SCH-MAC-51BX Receiver

9 V (2 alkaline or 2 lithium batteries)

60 hrs, alkaline (on & off usage @ 70°F) 120 hrs, lithium (on & off usage @ 70°F)

Approx. 40 Hz idling tone from speaker frequency of pulsing tone (increases or decreases) with signal intensity

2.64 lbs (1.20 kg)

SCH-MAC-51BX

Magnetic & Pipe & Cable Locator (Includes Transmitter Built Into Carrying Case & Receiver)

SCH-MAC–51BX-TX

Transmitter Only (Includes Case, Conductive Clip & Stake)

SCH-MAC-51BX-RX

Receiver Only (Includes Carrying Case)

TraceMaster II®

Operating Temp.

Overall Length

Waterproof Length

Nominal Sensor Spacing

The TraceMaster II® is the professional’s choice for locating pipe and cable, but you don’t have to be a pro to use it. So, to find telephone, cable TV, and fiber optic lines, AC power lines, water and gas pipes, keep a TraceMaster® in your kit. The TraceMaster II® is the first pipe and cable locator on the market to offer a Remote Link between the transmitter and the receiver units. This is accomplished through a radio frequency (RF) two-way communications channel, and makes it possible to change the transmitter frequency from the receiver up to 1500 ft away.

-13°F to 140°F (-25°C to 60°C)

42.3" (107.4 cm)

34.5" (87.6 cm)

20" (50.8 cm)

Features

•Passive detection of 50 Hz or 60 Hz, sonde or cathodic frequency

•One button depth measurement

•Digital readout display of signal strength

•LCD displays left, right and "on-target" indications, as well as battery status

•60 hrs operational life (intermittent usage)

•Lightweight, easy-to-use design

•Digital Signal Processing which is easily upgraded as new features are developed

SCH-TMS-001-AF

TraceMaster AF: All 4 Frequencies + Passive Pipe & Cable Locator

W/ RF Link

SCH-TMS-001-MF

TraceMaster MF: Manual All 4 Frequencies + Passive Pipe & Cable Locator

W/O RF Link

SCH-GA-52CX Magnetic Locator W/ Case

SCH-GA-72CD Metered Magnetic Locator W/ Case

(*) This is the factory default audio output. An internal switch allows the user to change it to a fixed frequency and the volume varying with the gradient field intensity.

Inspector Handheld Digital Radiation Alert® Detector

The Inspector Xtreme offers maximum performance in a lightweight rugged solution for using your survey meter in the field. The Inspector Xtreme is designed specifically for individuals operating in tough environments, such as 1st Responders, Mining, and HAZMAT crews. The unit is a small, handheld, microprocessor-based instrument which offers excellent sensitivity to low levels of alpha, beta, gamma, and x-rays. The digital readout is displayed with a red count light and a beeper sounds with each count detected. Other features include an adjustable timer, external calibration controls and selectable alert.

Detector

Internal Halogen-quenched, uncompensated GM tube with thin mica window, 1.4 - 2.0 mg/cm2 areal density. Effective diameter of window is 45 mm (1.75"). Radiation symbol on front label marks the center of the detector.

Display

•4 digit liquid crystal display with indicators

•Averaging Periods

•Display will update every 3 sec. At low background levels, the update is the moving average for the past 30 sec time period. The timed period for the moving average decreases as the radiation level increases

Gamma Sensitivity

3500 CPM/mR/hr referenced to Cs-137. Smallest detectable level for I-125 is .02 µCi at contact. Timer can set 1 minute sampling periods from 1 to 10 minutes.

Monitor 4 & 4EC

Same Monitor 4. New ergonomic design. The M4 and M4EC are compact, general purpose survey meters capable of detecting alpha, beta, gamma, and x-rays over 3 selectable ranges. A red count light flashes and a beep sounds with each event detected. The Monitor 4EC offers a more linear reading for gamma and x-rays (above 40 keV).

Detector

•Monitor 4: Halogen - quenched uncompensated GM tube with thin mica window 1.5 to 2.0 mg/cm2 thick

•Monitor 4EC: Halogen-quenched GM tube, energy compensated sidewall 2 mm tin filter. Thin mica window 1.5 to 2.0 mg/cm2 thick

•Display: Analog Meter holds full scale in fields as high as 100X max reading

•Operating Range: 0 to 50 mR/hr and 0 to 500, 0 to 5,000, 0 to 50,000 CPM or 0 to 500 μSv/hr

Monitor 4 Energy Sensitivity

•M4: Detects alpha down to 2.5 MeV; typical detection efficiency at 3.6 MeV > 80%.

Detects beta at 50 keV with 35% efficiency.

Detects beta at 150 keV with 75% efficiency. Detects gamma and x-rays down to 10 keV through the window, 40 keV minimum through the sidewall. Normal background is approximately 10 to 20 CPM.

Operating Range

•mR/hr - .001 (1 µR) to 100; mR/hr CPM - 0 to 350,000

•µSv/hr - .01 to 1000 CPS - 0 to 5000

•Total / Timer - 1 to 9,999,000 counts

Accuracy

•mR/hr ± 10% typical (NIST); ± 15% max - 0 to 100

•µSv/hr ± 10% typical (NIST); ± 15% max - 01 to 1000

•CPM ± 15% max - 0 to 350,000 (Referenced to Cs-137)

SE-INSPECTOR Inspector Radiation Survey Meter

SE-INSPECTOR-XTR

Includes Inspector W/ Xtreme Boot & Carrying Case

SE-WTP Wipe Test Plate

SE-IS Instrument Stand

•M4EC: Same as Monitor 4 except the energy response for gamma and x-rays through the detector sidewall is flat within +61% or -26% over the range of 40 keV to 100 keV, and within +35% or -17% over the range of 100 keV to 1.3 MeV.

•Gamma sensitivity: 1000 CPM/mR/hr (ref. to Cs-137)

•Range switch: X1, X10, X100, battery check

•Accuracy: ± 15% of full scale (referenced to Cs-137)

•Audio: internally mounted beeper (can be turned off for silent operation)

•Power requirements: 9 V alkaline battery up to 2,000 hrs at normal background

•Temperature range: -20° C to 55°C (-4°F to 131°F)

Weight

•M4: 223.9 g (7.2 oz) without battery

•M4EC: 245.7 g (7.9 oz) without battery

•Size: 8.25" x 2.75" x 1.875" (210 x 70 x 48 mm)

Includes carrying case with belt clip, observer software and mini-USB cable.

Accessories: SI Meter Option

Warranty: 1 year limited warranty

SE-MONITOR4 Monitor 4

SE-MONITOR4USB

Monitor 4 (Includes USB Cable & Observer Software)

SE-MONITOR4EC Monitor 4EC

SE-MONITOR4ECUSB

Monitor 4ECUSB (Includes USB Cable & Observer Software) All meters above come with carrying case. Batteries not included.

Fast, Accurate & Economical!

Disposable Polyethylene Bailers

Polyethylene Bailers are chemically inert, natural colour, virgin, high density polyethylene material. Each bailer comes individually packaged and precleaned using Protocol A. hose & operating manual. Does not include Universal Low Flow Holder for sorbent tubes.

EZ-Flow Bailers

The TITAN EZ Flow™ Single Check Ball NonWeight Groundwater Sampling Bailer has been TESTED and CERTIFIED to provide the user with an ACCURATE representative sample - EVERY TIME, GUARANTEED! It is the ideal bailer for obtaining groundwater samples from the top portion of the well column in low to medium sediment concentration environments.

EZ-Flow Double Check Ball Bailers - Point Source

This patented bailer eliminates aerating and agitating the sample, in low to medium sediment concentration environments. The Titan series hemispheric soft coated check valves allow the operator to retrieve samples from specific depths.

CW-B1314-24

0.41" O.D. x 42" L, Nonweight, 75 ml, 24/Case

CW-B1214-24

0.75" O.D. x 42" L, Nonweight, 250 ml, 24/Case

CW-B1111-24

1.6" O.D. x 12" L, Nonweight, 350 ml, 24/Case

CW-B1121-24

1.6" O.D. x 12" L, Lightweight, 350 ml, 24/Case

CW-B1114-24

1.6" O.D. x 42" L, Nonweight, 1.1 L, 24/Case

CW-B1124-24

1.6" O.D. x 42" L, Lightweight, 1.1 L, 24/Case

CW-B1115-24

1.6" O.D. x 48" L, Nonweight, 1.3 L, 24/Case

CW-B1125-24

1.6" O.D. x 48" L, Lightweight, 1.3 L, 24/Case

CW-B1414-06

3" O.D. x 42" L, Nonweight, 4.4 L, 6/Case

CW-EZ3-B3111-24

1.6" O.D. x 12" L, Nonweight, 350 ml, 24/Case

CW-EZ3-B3113-24

1.6" O.D. x 36" L, Nonweight, 1 L, 24/Case

CW-EZ3-B3114-24

1.6" O.D. x 42" L, Nonweight, 1.1 L, 24/Case

CW-EZ3-B3115-24

1.6" O.D. x 48" L, Nonweight, 1.3 L, 24/Case

CW-EZ3-B3121-24

1.6" O.D. x 12" L, Lightweight, 350 ml, 24/Case

CW-EZ3-B3123-24

1.6" O.D. x 36" L, Lightweight, 1 L, 24/Case

CW-EZ3-B3124-24

1.6" O.D. x 42" L, Lightweight, 1.1 L, 24/Case

CW-EZ3-B3125-24

1.6" O.D. x 48" L, Lightweight, 1.3 L, 24/Case

CW-EZ7-B7121-24

1.6" O.D. x 12" L, Heavyweight, 350 ml, 24/Case

CW-EZ7-B7123-24

1.6" O.D. x 36" L, Heavyweight, 1 L, 24/Case

CW-EZ7-B7124-24

1.6" O.D. x 42" L, Heavyweight, 1.1 L, 24/Case

CW-EZ7-B7125-24

1.6" O.D. x 48" L, Heavyweight, 1.3 L, 24/Case

EZ-Flow Free Sample Bailers

New, innovative bailer design! Enlarged inner orifice retrieves a more accurate representative sample from wells containing "free product".

CW-EZ8-B8113-24

1.6" O.D. x 36" L, Polypro, Nonweight, 1 L, 24/Case

CW-EZ8-B8114-24

1.6" O.D. x 42" L, Polypro, Nonweight, 1.1 L, 24/Case

CW-EZ8-B8123-24

1.6" O.D. x 36" L, Polypro, Heavyweight, 1 L, 24/Case

CW-EZ8-B8124-24

1.6" O.D. x 42" L, Polypro, Heavyweight, 1.1 L, 24/Case

CLEAR-VIEW® PVC Disposable Bailers

The Clear PVC Bailers are made of high quality, clear PVC. Because of its material, it has a fast sink rate, faster than most weighted polyethylene bailers. The bailer holds its shape when sampling, and has a virtually leak free ball and valve seat.

ESP-CV463

0.46" O.D. x 36" L, PVC, Nonweight, 85 ml, 24/Case

ESP-CV464

0.46" O.D. x 48" L, PVC, Nonweight, 110 ml, 24/Case

ESP-CV701

0.70" O.D. x 12" L, PVC, Nonweight, 67 ml, 48/Case

ESP-CV703

0.70" O.D. x 36" L, PVC, Nonweight, 200 ml, 24/Case

ESP-CV704

0.70" O.D. x 48" L, PVC, Nonweight, 270 ml, 24/Case

ESP-CV151

1.5" O.D. x 12" L, PVC, Nonweight, 342 ml, 48/Case

ESP-CV153

1.5" O.D. x 36" L, PVC, Nonweight, 1 L, 24/Case

ESP-CV154

1.5" O.D. x 48" L, PVC, Nonweight, 1.1 L, 24/Case

ESP-SED

VOC Device (Slow), 24/Bag

VOSS Polyethylene Disposable Bailers

VOSS Bailers feature a patented Dome Design top and bottom to facilitate well entry and removal.

VO-PE75S

0.75" O.D. x 36" L, Nonweight, 260 ml, 24/Case

VO-PE75SW

0.75" O.D. x 36" L, Weighted, 260 ml, 24/Case

VO-PE75S83SR

0.75" O.D. x 83" L, Nonweight, 600 ml, 12/Case

VO-PE75SW83R

0.75" O.D. x 83" L, Weighted, 600 ml, 12/Case

VO-PE75-VOC

VOC Tips For 0.75" Bailers, 24/Case

VO-91946S

1.5" O.D. x 36" L, Nonweight, 1 L, 24/Case

VO-91946SW

1.5" O.D. x 36" L, Weighted, 1 L, 24/Case

VOSS Teflon® Disposable Bailers

The VOSS Teflon® Bailer can be used in any environment to eliminate exposing expensive, reusable bailers to high concentrations of contaminants that can cause permanent damage.  The bailers also eliminate repeated employee exposure to toxic substances during decontamination that pose a health risk due to cumulative effects in the body.

1.5" O.D. Teflon® Disposable Bailers

This bailer is ideal for sampling groundwater wells of 2" I.D. or larger.  Pre-cleaned and individually wrapped.  Constructed from chemically inert, Teflon® material.

VO-91946L

1.5" O.D. x 83" L, Nonweight, 2.4 L, 12/Case

VO-91946LW

1.5" O.D. x 83" L, Weighted, 2.4 L, 12/Case

VO-12451

VOC Removal Device For 1.5" Bailers, 24/Case

VO-PE3S

3.0" O.D. x 36" L, Nonweight, 4 L, 9/Case

VO-PE3SW

3.0" O.D. x 36" L, Weighted, 4 L, 9/Case

VO-PE3VOC VOC Tips For 3" Bailer, 9/Case

VO-SST36021

1.5" O.D. x 36" L, Teflon®, Nonweight Bailers, 1 L, 12/Case

VO-SST36021W

1.5" O.D. x 36" L, Teflon®, Weighted Bailers, 1 L, 12/Case

VO-RDT031

VOC Tips For 1.5" Teflon®, 12/Case

CW-B2111-12

1.5" O.D. x 12" L, Teflon®, Nonweight Bailers, 350 ml, 12/Case

CW-B2131-12

1.5" O.D. x 12" L, Teflon®, Heavyweight Bailers, 350 ml, 12/Case

CW-B2113-12

1.5" O.D. x 36" L, Teflon®, Nonweight Bailers, 1 L, 12/Case

CW-B2133-12

1.5" O.D. x 36" L, Teflon®, Heavyweight Bailers, 1 L, 12/Case

VOSS 1.5" O.D. Disposable Polyethylene Pressurized Bailers

The Pressurized Bailers provide an easy method for filtering water samples in the field. Each bailer comes complete with a barbed hose adapter for attaching the pump to the bailer, an adapter with a special notched thread that is used with any of the filters or removal devices to displace the ball and establish flow and a large barbed removal device for bottom emptying of the samples without filtering.

EZ-Flow Sand Catcher Design Triple Check Ball

Specifically created to retrieve accurate, complete samples from wells containing high concentrations of sand and silt. Multiple check ball design with "sand catcher"grooves to trap sand/silt away from check valve orifices. Made of HDPE and Polypropylene material.

VO-PB010

Pressurized Bailers, 1.5" I.D. x 36" L, 12/Case

VO-PBHP

Hand-Operated Pressure Vacuum Pump, Comes With 1/4" I.D. Clear Plastic Tubing

VO-GWC.45-600

Voss 0.45 μm, High Capacity Groundwater Filter

VO-PBVOC VOC Tips, 12/Case

CLEAR-VIEWTM Hydrocarbon/LNAPL Recovery Bailers

Sample or bail out hydrocarbons with simple to use hydrocarbon recovery bailers!

CW-EZ9-B9113-24

1.6" O.D. x 36" L, Nonweight, 1 L, 24/Case

CW-EZ9-B9114-24

1.6" O.D. x 42" L, Nonweight, 1.1 L, 24/Case

CW-EZ9-B9133-24

1.6" O.D. x 36" L, Heavyweight, 1 L, 24/Case

CW-EZ9-B9134-24

1.6" O.D. x 42" L, Heavyweight, 1.1 L, 24/Case

Eaters

Designed for the removal of the top layer of petroleum before sampling without absorbing water. Petroleum absorbing capacity of 0.5 liters per unit. Each unit is individually cleaned and ready to use.

ESP-CV701H

0.70" O.D. x 12" L, Polyethylene, 24/Case

ESP-CV703H

0.70" O.D. x 36" L, Polyethylene, 24/Case

ESP-CV151H

1.5" O.D. x 12" L, Polyethylene, 24/Case

ESP-CV153H

1.5" O.D. x 36" L, Polyethylene, 24/Case

ESP-CV154H

1.5" O.D. x 48" L, Polyethylene, 24/Case

ESP-CV157H

1.5" O.D. x 84" L, Polyethylene, 9/Case

ESP-CV333H

3.3" O.D. x 36" L, Polyethylene, 9/Case

CW-EZ-A6015-12

Oil Eater, Polypro, 1.3" O.D. x 20" L, 12/Case

PATENTED!

CarboBailer™

The CarboBailer™ is a single, economical way of collecting and/or sampling hydrocarbons from wells, drums, or tanks.  It works by just slowly inserting the bailer into the well and just slowly, removing it.  As it will be raised from the well, the water will drain out of the bailer while the hydrocarbons will be trapped. The hydrocarbons can be removed by either pouring out from the top or using a bottom emptying device.

Reusable PVC White Bailer

• Designed to suit basic sampling needs

• High quality threaded PVC

• Easy to clean with removable bottom check valve

Bailer Extensions Available ... Call for Price & Availability!

Reusable PVC Clear Bailer

Designed to suit basic sampling needs Clear PVC permits a visual check of the sample

Reusable White Teflon® Bailer

• Have an open top design and are threaded to allow disassembly for easy decontamination.

• Suitable for sampling virtually any potential contaminant while maintaining the integrity of the collected sample.

Stainless Steel Bailer

• Use Stainless Steel when plastic bailers are not suitable

• Type 304 stainless is used to manufacture the bailers

• Easy decontamination

ER-CAR-P163

PVC 1.6" Diameter x 3' Long

Specifications

Manufactured in PVC, individually wrapped and comes with a bottom-emptying device.

MO-BPWS.84X24

0.84" O.D. x 24" L, PVC White Bailer

MO-BPWS.84X36

0.84" O.D. x 36" L, PVC White Bailer

MO-BPWS1.66X24

1.66" O.D. x 24" L, PVC White Bailer

MO-BPWS1.66X36

1.66" O.D. x 36" L, PVC White Bailer

MO-BPWS2.375X24

2.375" O.D. x 24" L, PVC White Bailer

MO-BPWS2.375X36

2.375" O.D. x 36" L, PVC White Bailer

MO-BPWS3.50X24

3.5" O.D. x 24" L, PVC White Bailer

MO-BPWS3.50X36

3.5" O.D. x 36" L, PVC White Bailer

MO-BPCS1.05X24

1.05" O.D. x 24" L, PVC Clear Bailer

MO-BPCS1.05X36

1.05" O.D. x 36" L, PVC Clear Bailer

MO-BPCS1.66X24

1.66" O.D. x 24" L, PVC Clear Bailer

MO-BPCS1.66X36

1.66" O.D. x 36"L, PVC Clear Bailer

MO-BPCS3.50X24

3.5" O.D. x 24" L, PVC Clear Bailer

MO-BPCS3.50X36

3.5" O.D. x 36" L, PVC Clear Bailer

MO-BTWS1.66X24

1.66" O.D. x 24" L, Teflon Bailer

MO-BTWS1.66X36

1.66" O.D. x 36" L, Teflon Bailer

MO-BSS.50X24

0.5" O.D. x 24" L, Stainless Bailer

MO-BSS.50X36

0.5" O.D. x 36" L, Stainless Bailer

MO-BSS1.05X24

1.05" O.D. x 24" L, Stainless Bailer

MO-BSS1.05X36

1.05" O.D. x 36" L, Stainless Bailer

MO-BSS1.66X24

1.66" O.D. x 24" L, Stainless Bailer

MO-BSS1.66X36

1.66" O.D. x 36" L, Stainless Bailer

MO-BSS3.50X24

3.5" O.D. x 24" L, Stainless Bailer

MO-BSS3.50X36

3.5" O.D. x 36" L, Stainless Bailer

Lost your Bailer? Use the Bailer Retriever to Find It!

Bailer Retriever

The Bailer Retriever has been engineered to retrieve bailers which have become separated from their retrieval line.  The product is 5 1/2" long, manufactured from stainless steel, incorporates 4 hooks, and has been designed to work in wells of 2" diameter and bigger.

CO-5430

2" Bailer Retriever

HydraSleeve® No Purge Sampler

Naturally weighted, larger valve opening. The HydraSleeve® is used in place of purging and low-flowing sampling methods in groundwater monitoring wells to obtain representative, real time, discrete interval sample of ALL compounds under natural groundwater flow conditions. The HydraSleeve is effective for sampling slow recharge wells, for monitoring interfaces, and for concentration profiling. Simply lower the empty sampler to the desired interval, let the well return to undisturbed conditions, and pull the sampler through the sample zone.

Bailer Suspension Cord

General purpose Nylon Twine, 1/16" (16 mm) diameter, 800 ft

Lufkin Tapes

EP-GSH-110

HydraSleeve, 1.75" x 30", 650 ml

EP-GSH-220

HydraSleeve, 2.75" x 30", 1.6 L

EP-GSW-305

Weight, Stainless Steel With Eyebolt

EP-GSW-314

Weight, Stainless Steel Top Weight For HydraSleeve, Hollow With 2 Attachments Holes One End

CO-W5440

Polyethylene Rope, 1000 ft Roll

CO-3850

Teflon® Coated Stainless Steel Wire, 50 ft Roll

EP-FSF-105

4" Cable Tie, 100/Pack

EP-FSF-110

8" Cable Tie, 100/Pack

Pro-Series Hi-Viz® Orange Linear Fiberglass Tapes

Heavy duty fiberglass tapes offer twice the stretch resistance of ordinary tapes.

Features

• Tape width: 1/2"

• Tape increments: 1/8"

• 3:1 retrieval ratio enables fast rewinding of tape

MO-TAPE1/2X100FOR1/8

Lufkin Tape, 100' Length, 1/8" Increment

MO-TAPE1/2X300FOR1/8

Lufkin Tape, 300' Length, 1/8" Increment

ER-800NYL Nylon Twine, 1/16" (16 mm) Diameter, 800 ft Roll

Grab a Sample!

Grab Sample Kit

The ERE Grab Sample Kit makes sample collection quick and easy. The fiberglass telescopic pole is durable, strong and safe for long-time on-site use.

Comes complete with:

• Purcy clamp, made from a durable glass filled nylon

• Eight 1000 ml wide mouth sample bottles

• Sturdy carrying case

• Fiberglass telescopic pole in lengths of either 6 - 12 ft, 8 - 16 ft, or 10 - 20 ft

ER-GRBKIT-12

Grab Sample Kit With 6 - 12 ft Telescopic Pole

ER-GRBKIT-16

Grab Sample Kit With 8 - 16 ft Telescopic Pole

ER-GRBKIT-20

Grab Sample Kit With 10 - 20 ft Telescopic Pole

ER-GRBCLAMP

Purcy Clamp

ER-GRBPOLE12 6 - 12 ft Pole

ER-GRBPOLE16 8 - 16 ft Pole

ER-GRBPOLE20 10 - 20 ft Pole

ER-GRBCASE Carrying Case

ER-GRB1000ML

1000 ml Nalgene Bottles

Swing Sampler

If you need to collect a sample from a horizontal flowing stream, such as a sewer, the Swing Sampler is just what you need.

Features

• The end of the sampler swings, allowing collection from different angles, including 90°

• The 6 ft fiberglass pole extends to 12 ft and the 8 ft pole extends to 24 ft providing a long length for any sampling situation

• Unit comes with a 960 ml polyethylene bottle and cover has a vinyl liner for leak-proof protection

• The bottle is held in place with a plastic snapper ring that has an adjustable locking device

NA-B01310WA 12 ft Swing Sampler, 5.50 lbs

NA-B01366WA 24 ft Swing Sampler, 10 lbs

NA-B01244WA 960 ml Bottles, 12/Pack, 1.75 lbs

Sampling Line for Whirl-Pak® Bags

With 25 ft of nylon cord, this unit will go a long way to collect a sample – or you can add more line if necessary.

Features

• The heavy urethane bag holder will submerse the bag below the surface for easy sample collection

• Specially designed to hold any size bag, the holder uses a retainer ring to secure the bag firmly in place

• The unit comes in a convenient carrying case with three sizes of retainer rings to hold the bags

NA-B01368WA Sampling Line For Whirl-Pak® Bags, 3.50 lbs

Sampling Pole for Whirl-Pak® Bags

Specially designed to hold any size bag, the holder uses a retainer ring to secure the bag firmly in place.  The fiberglass pole extends from 6 ft to 12 ft has a swinging end, and comes with three sizes of retainer rings to hold the bags.

NA-B01367WA Sampling Pole For Whirl-Pak® Bags, 5.50 lbs

Reach Locations

Series 6000 Sub Surface Samplers

Features

• The sampling head is manufactured from high quality chemically resistant polypropylene, and the metal parts are fabricated in stainless steel

• Good for hazardous locations

• Accepts a 1000 ml wide mouth jar

• Optional displacement plunger available for sampling norms that require 1" space between the sample and the cap

• Sampler available in 6, 12 and 18 foot lengths

• Sampler supplied with one 1000 ml jar

Series 7000 Sub Surface Samplers

Features

•The sampling head is manufactured from high quality chemically resistant polypropylene, and is connected to a handle assembly manufacturedfrom telescopic aluminum poles

•Accepts a 1000 ml wide mouth jar

•Optional displacement plunger available for sampling norms that require 1"space between the sample and the cap

Liquid Pump Sampler

Allows quick sampling of liquids. The chance of cross contamination is greatly reduced by using new tube and bottles for each sample.

• Low to medium viscosity liquids

• Pharmaceutical, food, chemical and cosmetic industries

• Able to pump water to a height of about 4 m

CO-6000 6' Sub Surface Sampler

CO-6010 12' Sub Surface Sampler (2 Sections Of 6')

CO-6020

18' Sub Surface Sampler (3 Sections Of 6')

CO-6050

Plunger

CO-9025 1000 ml Jar, 12/Case

CO-9025C

1000 ml, Pre-Cleaned Jar, 12/Case

Suitable for High & Low Viscosity Liquids & Suspensions

Liquid Cup Sampler

Suitable for sampling liquids and suspensions. Discrete samples can be taken from known heights within the product.

• Chemical, food, and cosmetics industries

• 316 stainless steel

• Easy to use; just insert the sampler to the required depth, squeeze handle which pushes the pot, after filling remove the sampler

• 100 ml cup volume, 55 mm cup diameter

SS-5030A-600 100 ml Sample Volume, 600 mm Long

SS-5030A-1000 100 ml Sample Volume, 1000 mm Long

SS-5030A-1500 100 ml Sample Volume, 1500 mm Long

Takes Liquid, Sludge & Slurry

Samples from Lakes, Spillways, Rivers, Manholes, & many other Hard to

Ideal for Sampling Milk, Cream, Whey, Fruit Juices, Water & Liquids in General

Liquid Sampler

•Nickel-plated brass cup is chemical and corrosion resistant

•Per each 50 cm (19 1/4") length reaches into most drums, tanks and bottles

•50 ml cup diameter is 32 mm (1 1/4"), narrow enough to fit many carboy

•Finger ring at top end actuates bottom valve on cup to quickly dispense sample

Choose a Length & Beaker to Suit your Application

Long Polyethylene Dippers

High-density Polyethylene Dippers for removing samples from large tanks.  Lightweight but durable.  Available in three sizes 12 ft handle (two pieces) has a wood core.  Has two pour spouts and graduations, PVC grip handle.

Great for Hard to Reach Locations!

Disposable Polyethylene Dippers

•Specifically designed for applications where a disposable product is required

•Applications include sampling of oils, sewage, contaminated water, poisons, etc.

•The pre-cleaned dippers are individuallypre-packaged in a poly bag

CO-5300 600 ml / 18", 10/Case

CO-5301 600 ml / 46", 10/Case

CO-5302 600 ml / 18", Pre-Cleaned, 10/Case

CO-5303 600 ml / 46", Pre-Cleaned, 10/Case

Telescopic Dipper

The dipper is manufactured from aluminum tubing in three lengths to fit most sampling applications, 8', 12' and 24'. The sampler is supplied with one replaceable 600 ml poly-propylene ladle. Use the swivel adapter for allowing dipping ladles to rotate almost 360 degrees.

CO-5308

Telescopic Dipper 4' - 8'

CO-5312

Telescopic Dipper 5' - 12'

CO-5318

Telescopic Dipper 7' - 18'

CO-5324

Telescopic Dipper 7' - 24'

CO-5326

Replacement 600 ml Dipper Ladles, 10/Pack

CO-5325

Swivel Adapter

CO-5328

Replacement 600

Stainless Steel Dipper

Each dipper has a 500 ml capacity stainless steel ladle which incorporates pour spouts on each side of the ladle.

CO-5390-1

1.5' Stainless Steel Dipper

CO-5390-3

3' Stainless Steel Dipper

CO-5390-6

6' Stainless Steel Dipper

CO-5390-8

8' Stainless Steel Dipper

Great for Chemical, Cosmetic & Pharmaceutical Industries

Tank Yanks

The Tank Yank is an accurate, safe and productive device to collect representative samples from any sized container. Tank Yanks were developed through the collaboration of professionals annoyed with the inefficiencies of traditional sampling techniques.  Irrespective of operator aptitude, stature and workplace controls or environmental factors, the sampling process is uniform and consistent. Sampling is simple: Just lower the sampler into the material to be sampled, engage the plunger to secure the core, and finally retrieve the plunger to transfer the material directly into a sample jar.

Glass and Plastic Drum Thief Samplers

Open-ended Drum Thief is the ideal sampler to use to sample drums, transformers and other liquid containers where small volume low cost sampling is required. Each sampler is 42” in length and manufactured from chemical resistant borosilicate glass or HDPE plastic. Both our glass and plastic samplers are easy to use. Just insert the drum thief into the drum or container to be sampled, cover the open end with your thumb, and remove the sample. Other diameters and lengths are available upon request.

Glass Coliwasa Samplers

Glass Coliwasa Samplers are designed to be an economical, safe, and fast method of drum sampling

• Each 43" coliwasa sampler is manufactured by borosilicate glass

ER-2100N-S 250 ml Sampler With Stainless Steel Rod, 43" L x 0.86" I.D., 24/Case

ER-2100N-J 250 ml Sample Jars, 24/Case

ER-2100E Extension Tubes, 42" L, 24/Case

ER-3100N-S 500 ml Sampler With Stainless Steel Rod, 43" L x 1.08" I.D., 12/Case

ER-3100N-J 500 ml Sample Jars, 12/Case

ER-3100N-E Extension Tubes, 42" L, 12/Case

ER-4100N-S 1000 ml Sampler With Stainless Steel Rod, 43" L x 1.58" I.D., 12/Case

ER-4100N-J 1000 ml Sample Jars, 12/Case

ER-4100N-E Extension Tubes, 42" L, 12/Case

CO-2410-25

12 mm (0.450") O.D., 100 ml (3 oz) Capacity Thief, HDPE, 42" Long, 25/Case

CO-2440-25

16 mm (0.625") O.D., 150 ml (5 oz) Capacity Thief, HDPE, 42" Long, 25/Case

CO-5520-25

7.5 mm (0.300”) O.D., 25 ml, (3/4 oz) Capacity Thief, Glass, 42" Long, 25/Case

CO-5530-25

12 mm (0.450") O.D., 100 ml (3 oz) Capacity Thief, Glass, 42" Long, 25/Case

CO-5540-25

18 mm (0.700") O.D., 200 ml (7 oz) Capacity Thief, Glass, 42" Long, 25/Case

CO-5500

200 ml Coliwasa Viton Seal, Glass, 43" Long, 12/Case

CO-5503

200 ml Coliwasa Teflon Seal, Glass, 43" Long, 12/Case

Plastic Coliwasa Samplers

• Made of HDPE, the 7/8" diameter sampler is designed to extract samples from drums, tanks, and rail cars

• Just insert the sampler into the drum or tank to be sampled, pull up on the handle and the sample is locked in place

Teflon® Coliwasa

CO-5660

75 ml Coliwasa, HDPE, 18" Long, 12/Case

CO-5665

250 ml Coliwasa, HDPE, 42" Long, 12/Case

CO-5680

500 ml Coliwasa, HDPE, 84" Long, 12/Case

• Ideal to use when sampling liquids and semi-solid materials

CO-6990

Disposable Liqui and Visco Thief

Two models are available which make sampling liquids, creams and pastes very easy:

• LiquiThief has a 1.5 mm opening, 21 mm outer diameter

• ViscoThief has a 10 mm opening, 21 mm outer diameter

• Both are designed to be very rigid

• Depth at which sample is taken is known

• Also available in pre-sterilised

Liquid & Cream Sampling without Costly Cleaning

Volume, 21 mm O.D., Polypropylene, 20/Box

SS-8055P-1000

ViscoThief, 1000 mm Length, 190 ml Volume, 21 mm O.D., Polypropylene, 20/Box

Ideal for Low Viscosity Liquids

Liquid Master

The Liquid Master is perfect for quickly sampling most liquids.

•Can be quickly stripped down for cleaning

•Both single point and cross sectional samples can be taken

•Seal prevents sample from dripping

•25 mm diameter

SS-5035S-600

600 mm Length, 150 ml Volume, 316 Stainless Steel

SS-5035S-1000

1000 mm Length, 270 ml Volume, 316 Stainless Steel

SS-5035S-1500

1500 mm Length, 420 ml Volume, 316 Stainless Steel

SS-5035T-600

600 mm Length, 150 ml Volume, Teflon®

SS-5035T-1000

1000 mm Length, 270 ml Volume, Teflon®

SS-5035T-2000 2000 mm Length, 420 ml Volume, Teflon®

SS-5035P-600 600 mm Length, 150 ml Volume, Polypropylene

SS-5035P-1000

1000 mm Length, 270 ml Volume, Polypropylene

SS-5035P-2000 2000 mm Length, 420 ml Volume, Polypropylene

Bacon Bomb Multi-Layer Sampler

Multi-Layer Samplers function in hundreds of plants, including petroleum oil refineries, varnish sugar, chemical plants and fisheries. The plunger keeps the sampler closed until it strikes the bottom, where the sampler fills.  When the Multi-Layer Sampler is raised, the plunger automatically falls back into position, closes the sampler and prevents any contamination by liquid taken at higher levels. The sampler picks up sediment or water directly off the bottom. Samples can also be taken at any point above the bottom by attaching a cord to the top of the plunger, raising it at will to fill the sampler and lowering it to close the sampler, thereby sealing the sampler and holding the contents

Composite Sampler

When lowered into a tank, liquid flows into the lower end of the sampler only at the rate that air is displaced through the opening at the top. A rugged needle valve in the Composite Sampler permits exact control of flow rate. If the sampler is lowered from the top to the bottom of the liquid at a uniform rate and is not quite full when withdrawn, the liquid trapped in the sampler must be truly an average sample.

JT-1 Water Sampler

A one-liter sampler of clear acrylic furnished with a 20 meter calibrated line and lead collar which assures rapid descent and minimal drift.  A brass messenger triggers a release mechanism to seal the sample chamber with two fitted rubber plungers at the desired sampling depth. The built-in side outlet and flexible tube allows for removal of the water sample.

MLS-4851 32 oz, 3 1/4" Diameter, 16" H, Brass & Bronze

MLS-4850 16 oz, 2 3/4" Diameter, 12" H, Brass & Bronze

MLS-48-302 16 oz, 2 1/2" Diameter, 11" H, Stainless Steel

MLS-4850-S

16 oz, 2 1/4" Diameter, 17" H, Brass & Bronze

MLS-4849

8 oz, 2 1/4" Diameter, 10" H, Brass & Bronze

MLS-4852

4 oz, 1 7/8" Diameter, 9" H, Brass & Bronze

MLS-4852-S

4 oz, 1 1/8" Diameter, 15 1/2" H, Brass & Bronze

MLS-EXTROD12

12" Rod, Brass & Bronze

MLS-EXTRODSET

Set Of 4, 1 Each 1", 2", 3", 6" Brass & Bronze

Secchi Disk

Determine turbidity or degree of visibility in natural waters with this weighted 20 cm diameter disk

• braided line

• marked every half meter and at every meter up to 20 meters

LA-0171-CL

Disk With Black & White Quadrants & Calibrated Line

LA-0171

Black & White Secchi Disk Only

MLS-4854 Composite Sampler, Brass & Bronze 16 oz, 2 3/4" Diameter, 12" H

LA-1077

JT-1 Water Sampler

Waterra Inertial Pumps

Micro Flow System

Specifications

Optimal Performance Depth: 0 - 37.5 ft

Depth Limit: 75 ft

Flow: 0.4 - 0.6 gpm

Well Diameter: 0.5" - 1.25"

Applications

• Micro wells

• Sampling damaged wells

• Custom installations

• For use with direct push technology

• Hand operation WA-SS-10

Standard Flow System

Specifications

Optimal Performance Depth: 0 - 120 ft

Depth Limit: 175 ft

Flow: 0.9 - 2.5 gpm

Well Diameter: 1.25" - 4.0"

Applications

• Most popular system, best cost/performance ratio

• Hand operation or automatic operation

High Flow System

Specifications

Optimal Performance Depth: 0 - 175 ft

Depth Limit: 225 ft

Flow: 1.5 - 3.5 gpm

Well Diameter: 1.5" - 6.0"

Applications

• Deep well sampling

• Large diameter wells

• Well development

• High flow rates

• Sediment laden wells

WA-D-32

Delrin Footvalve 1.25" O.D.

WA-SS-32 Stainless Steel Footvalve 1.25" O.D.

WA-1-HDPE-100

HDPE Tubing 1.0" O.D. x 0.814" I.D. 100 ft

Low Flow System

Specifications

Optimal Performance Depth: 0 - 62.5 ft

Depth Limit: 100 ft

Flow: 0.5 - 0.7 gpm

Well Diameter: 0.75" - 1.25" Applications

• Sampling piezometers

• Sampling damaged wells

• Custom installations

• Hand operation WA-D-13

WA-D-16

Delrin Footvalve 0.625" O.D.

WA-D-25

Delrin Footvalve 1"O.D.

WA-SS-16 Stainless Steel Footvalve 0.625" O.D.

WA-SS-19 Stainless Steel Footvalve 0.75" O.D.

WA-5/8-HDPE-100

HDPE Tubing 5/8" O.D. x 1/2" I.D., 100 ft

WA-5/8-HDPE-200

HDPE Tubing 5/8" O.D. x 1/2" I.D., 200 ft

WA-5/8-HDPE-500

HDPE Tubing 5/8" O.D. x 1/2" I.D., 500 ft

WA-5/8-LDPE-100

LDPE Tubing 5/8" O.D. x 1/2" I.D., 100 ft

WA-5/8-LDPE-200

LDPE Tubing 5/8" O.D. x 1/2" I.D., 200 ft

WA-5/8-LDPE-500

LDPE Tubing 5/8" O.D. x 1/2" I.D., 500 ft

WA-5/8-TEF

Teflon Tubing 5/8" O.D. x 1/2" I.D., (min 25 ft)

WA-SBD-25

LDPE Tubing 1/2" O.D. x 3/8" I.D., 100 ft

WA-1/2-LDPE-500

LDPE Tubing 1/2" O.D. x 3/8" I.D., 500 ft

Surge Block Well Development Surge

WA-STD-STD

Nylon Tubing Connectors (10/Pack)

WA-1-HDPE-200

HDPE Tubing 1.0" O.D. x 0.814" I.D. 200 ft

WA-1-HDPE-300

HDPE Tubing 1.0" O.D. x 0.814" I.D. 300 ft

WA-1-LDPE-100

LDPE Tubing 1.0" O.D. x 0.814" I.D. 100 ft

WA-1-LDPE-200

LDPE Tubing 1.0" O.D. x 0.814" I.D. 200 ft

WA-1-LDPE-300

LDPE Tubing 1.0" O.D. x 0.814" I.D. 300 ft

WA-STD-HF

Nylon Tubing Connectors (5/Pack)

D-32

SS-32D-25SS-19D-16SS-16D-13SS-13SS-10

Best Seller!

Waterra Groundwater Filters

High Turbidity WA-FHT-45 Filter

Offers the user the most surface area available in capsule type filters. The unique open pleat geometry and 600 cm2 surface area provide the maximum media exposure while ensuring that even with the most turbid samples, filtration media will not be lost.

Medium Turbidity WA-FMT-45 Filter

Has all the great features of the WA-FHT-45 but with a reduced surface area of 300 cm2. These filters provide an economical alternative for lower turbidity sampling, when the highest possible capacity is not required.

0.2 Micron Inline Filter

Specifications

Polyethersulfone 0.45 or 0.2 micron filter media with a 3/8” threaded nipple and 1/2” hose barb allowing the filter to be attached easily to a variety of pumps and tubing sizes.

Applications

Perfect for meeting US EPA requirements of groundwater samples collected for dissolved and suspended metals.

The new 0.2 micron filter, WA-CAP300X2 features 300 cm2 of the same high quality PES media as the other filters, providing a fast, efficient and economical option for specialized filtering requirements.

WA-FHT45 0.45 Micron Rating, 600 cm2, High Turbidity

WA-FMT45 0.45 Micron Rating, 300 cm2, Medium Turbidity

WA-CAP300X2 0.2 Micron Rating, 300 cm2, Economical

Titan 5 Design High Capacity Disposable Groundwater Filters

•Innovative new design

•Accurate filtration media (5 layers)

•Ultra high capacity, over 790 cm2 filtration capacity

•"Sure Grip"casing design reduces the possibility of slippage during use

•Unique NPT and barb tip combination can accommodate a wide range of tubing and fitting sizes

•Choice between pressure feed model and gravity feed model

•Available in 0.45, 2.0, 5.0 and 10.0 micron size

InfoZone

The WA-FHT-45, WA-FMT-45 and WA-CAP300X2 can be easily used:

Use with the inertial pump

The filter is easily connected to the Waterra Inertial Pump with either the 3/8” threaded nipple or the 1/2” hose barb. Simply press fit this connector into your tubing and operate the pump. The pump’s pressure is more than adequate for moving the sample through the filter. Once the sample has been collected, the filter can be disposed of.

CW-F2000-10 0.45 Micron Rating, Pressure Feed, 10/Case

CW-F2001-10

CW-F4001-10

CW-F5000-10

CW-F5001-10

Use with Disposable Bailer

A filtered sample can be collected from the bailer by cutting a short section of VOC tubing 0.25” O.D. HDPE and press fitting this tube into the inlet on the filter. The other end can then be press fit into the end of the bottom emptying spout which is provided with every Waterra Bailer. The bottom emptying spout should then be inserted onto the valve of the bailer and the sample will be drained by gravity through the filter into the sample container.

VOSS Single Sample® High Capacity, Disposable Groundwater Filter Capsule

The Single Sample® High Capacity, Disposable Groundwater Filter Capsule is designed specifically for field filtering groundwater samples for metal analysis with 1/8" NPT threaded inlet and outlets with stepped hose adapter on the inlet side for in line filtering of pumped samples with up to 3/8" I.D. tubing.

An optional stepped barb can be threaded on each end for use of up to 1/2" tubing.

Features a true membrane element, certification for 67 metals and 2 anions, filtering capacity of 1 liter for most turbid samples and 1/8" NPT treaded ends with stepped hose adapter on inlet side.

VO-GWC.45-600

0.45 Micron Rating

VO-GWC-BARB Barb Filter Fitting

Disposable Transfer Vessel

The Disposable Transfer Vessel system is an easy to use system for transferring samples in only two steps.  First pour unfiltered sample into the transfer vessel then invert and pressurize the vessel with a hand pump.  The pressure forces the sample through the in-line filter and into a collection bottle.

Specifications

Constructed chemically inert poly material (pump, filter and collection bottle not included)

CW-V2844-10

Disposable Transfer Vessel System, 10/Box

ER-HPUMP Hand Pump

VOC Sampling Kit

After purging a well, approximately 7 feet of the VOC tubing is inserted inside the sampling tube leaving about one foot protruding out the end of the riser.  When pumping is stopped the sample tubing will cease to produce water, however the VOC’s tube will continue to flow operating as a siphon, drawing water down the level standing in the tubing.  This siphon action can easily be used to collect small samples for volatile analysis as the flow from the narrow tube is steady, laminar and easily directed into a glass vial.

Lever Pump

The Lever Pump was designed to minimize the tedious task of manually pumping water by maximizing the mechanical advantage. The lever is lightweight, rugged, portable tool that allows quick sampling of wells without the need for external power sources.  It is intended for use in conditions where the wells are 30 - 100 feet when using the Standard System or 60 feet max., when using the High Flow Systems.

WA-VOC-KIT VOC Sampling Kit Contains 10 Pieces Of 8' Long x 1 1/4" Diameter VOC Sampling Tube

WA-WLP-100 Lever Pump

SpecificationsLever Pump

Weight 8 lbs

Dimensions 17" H x 2.5" W x 24" L

Power Source Manual

Hydrolift-2

Every component in the Hydrolift-2 was designed to keep weight to an absolute minimum.  Use of aluminum extrusions, a high performance motor and high ratio gearing have produced an extremely powerful, compact and portable actuator.

WA-WHLP-II Hydrolift-2

PowerPack PP1

The PowerPack PP1 is powerful enough to lift water from over 200' depth using the Standard Flow System, and is so compact that it fits onto a backpack frame. The PowerPack PP1 incorporates clamps for High Flow and Standard Flow tubing sizes (adaptors are available for smaller tubes). This motor can run for approximately 1 hour without refueling.

SpecificationsHydrolift-2

Most Powerful Actuator!

Power Pump 2

The Power Pump 2 is an extremely rugged, powerful unit that has been proven to depths exceeding 250 feet. The unit works efficiently with either the Standard Flow or High Capacity Systems.

WA-WPP-2 Power Pump 2

Making your Job Easy!

Power

Weight 28.6 lbs

22.5" H x 14.5" W x 15.5" L

Power By Honda GX25 (25cc Mini 4-Stroke OHC gasoline engine)

Gearing 19:1

Performance Characteristics Generates a 4" stroke, adjustable 0 - 140 cycles/min

Additional Requirements Regular gasoline, SAE 10W-30 motor oil

WATER SAMPLING www.ereinc.com sales@ereinc.com 63

Footvalve Accessories

Valve Wrench

• Ensures that valves are securely attached to the tubing

• Eliminates lost valves down the well

Tube Cutter

• Faster & safer than a utility knife

•Rotating/rocking motion produces straight, clean cuts

Easy to Use, High Quality Solution for Purging, Sampling & Well Development

Mini, Super and Mega Purger Pumps

WA-WVW-1

Valve Wrench

WA-WTC-1

Tube Cutter

• Fits down a 2"monitoring well

• Pre-assembled sampling and purging kits with heavy gauge cable and alligator clips

• Simply connect high density tubing to the output of the pump and attach the battery connectors to a 12 V battery

• Tough plastic construction with PBT impeller

• Flow rates up to 3.5 gpm

• Pumping depths up to 90 ft

Good for Harsh Environments

Proactive 12 V Stainless Steel Pumps

Features for the Stainless Steel Monsoon and Stainless Steel MegaTyphoon

•High polished stainless steel body and components assures that the pumps will not corrode or rust under normal working conditions

•Can run continuously without the need for a cool down

•Runs off a 12 V DC car battery or mobile battery power packs

•Reliable design is suitabe for continuous sampling or purging of groundwater wells

•Low Flow Sample is as low as 10 ml/min from any depth when using the Low Flow with Power Booster LCD Controller. Easy to read, glow in the dark LCD display on the controller

•1.8"diameter - good for 2"monitoring wells or larger

•3/8"I.D. or 1/2"I.D. Poly tubing can be used

•Mega-Typhoon can run dry for up to one hour without motor damage

•Monsoon can run dry for up to two hours without motor damage

•500 hour motor life

•Sleek outside minimizes well hang ups

•Simple to clean and decontaminate

WA-WSP-SS-120

SS MONSOON

Pumps max. 120 ft

300 Watts Consumption, 38 Amps

7.5" Length x 1.82" Diameter

Supplied with 130 ft of heavy duty PVC wire neatly rolled up on a tubular metal reel with pump holder, 2 motor modules, disposable low flow control valve and wrench

WA-WSP-SS-80

SS MEGA-TYPHOON

Pumps max. 80 ft

240 Watts consumption, 20 Amps

6.5" Length x 1.82" Diameter

Supplied with 90 ft of heavy duty PVC wire neatly rolled up on a tubular metal reel with pump holder, 2 motor modules, disposable low flow control valve and wrench

Low Flow with Power Booster 1 & 2 LCD Control

The Proactive™ Low Flow with Power Booster 1 & 2 LCD Controller is engineered specifically for the Stainless Steel MegaTyphoon and Monsoon Pumps.

Precisely controls the water discharge with the turn of a knob.

Used to monitor and regulate low flow sampling as low as 40 ml/min.

Simplify your Next Sampling Project!

Standard Proactive Pumps

Features for the Cyclone, Mini-Typhoon, Typhoon, Tempest, Mini-Monsoon and the Tornado

•Can operate under harsh conditions and higher turbidity

•Computer engineered domed bottom debris screen will separate debris from water, thus extending motor life

•Constructed of PVC and Stainless Steel

•12 -15 Volts at source recommended

•1.8"diameter

•3/8"I.D. or 1/2"I.D. Poly tubing can be used

•Can run continuously without the need for a cool down

•Can run dry for up to two hours without motor damage

•400 hour motor life

Low Flow Sampling Controller (WA-PA-10800)

WA-WSP-12V-1

Cyclone (Single Stage), Pumps 25 ft Max.

WA-WSP-24V-3M

Tsunami (Three Stage) Pumps 100ft Max.

WA-WSP-12V-2M

Mini-Typhoon (Two Stage), Pumps 40 ft Max.

WA-WSP-12V-2

Typhoon (Two Stage), Pumps 50 ft Max.

WA-WSP-12V-3

Tempest (Three Stage), Pumps 60 ft Max.

WA-WSP-12V-4

Mini-Monsoon (Four Stage), Pumps 70 ft Max.

WA-WSP-12V-5

Tornado (Five Stage), Pumps 85 ft Max.

WA-PA-10800

Low Flow Sampling Controller

WA-1/2-LDPE-100

Low Density Polyethylene, 1/2" O.D. x 3/8" I.D., 100 ft

Features

•Engineered with reverse polarity and advanced thermal overload protection

•Heavy duty steel weatherproof case

•Constant Voltage Boosting Technology (CVBT) allows the correct voltage to reach the pump motors

•20 Amps "safety" fuse to protect electronics and user

•3 foot wire lead to battery clamps and 5 foot wire leads to pump connector

•Steel handle for comfort and control

WA-WSP-12V-1

CYCLONE (Single Stage)

Pumps max. 25 ft

40 - 50 Watts Consumption, 4 Amps

7" Length x 1.82" Diameter

Supplied with 35 ft of heavy duty 12 gauge wire, cigarette plug and battery clamps

WA-WSP-12V-2M

MINI-TYPHOON (Two Stage)

Pumps max. 40 ft

105 Watts Consumption, 7 Amps

12" Length x 1.82" Diameter

Supplied with 50 ft of heavy duty 12 gauge wire, cigarette plug and battery clamps

WA-WSP-12V-2

TYPHOON (Two Stage)

Pumps max. 50 ft

105 Watts Consumption, 8 Amps

12" Length x 1.82" Diameter

Supplied with 60 ft of heavy duty 12 gauge wire, cigarette plug and battery clamps

WA-WSP-12V-3

TEMPEST (Three Stage)

Pumps max. 60 ft

180 Watts Consumption, 11 Amps

17" Length x 1.82" Diameter

Supplied with 70 ft of heavy duty 12 gauge wire, cigarette plug and battery clamps

WA-WSP-12V-4

MINI-MONSOON (Four Stage)

Pumps max. 70 ft

105 Watts Consumption, 13 Amps

20" Length x 1.82" Diameter

Supplied with 80 ft of heavy duty 12 gauge wire, cigarette plug and battery clamps

WA-WSP-12V-5

TORNADO (Five Stage)

Pumps max. 85 ft

200 Watts Consumption, 15 Amps

24" Length x 1.82" Diameter

Supplied with 90 ft of heavy duty 10 gauge wire, cigarette plug and battery clamps

High Performance Proactive Pumps

Features for the Mega-Typhoon, Tsunami, Super-Twister, Monsoon, Hurricane and Mega-Monsoon

•Can pass sand, small rocks, and debris without getting clogged or damaging the pumps

•Constructed of PVC and Stainless Steel

•12 - 15 Volts at source recommended

•1.8"diameter

•3/8"I.D. or 1/2"I.D. Poly tubing can be used

• Can run continuously without the need for a cool down

•Mega-Typhoon and Mega-Monsoon can run dry for up to one hour without motor damage

•Tsunami, Monsoon and Hurricane can run dry for up to two hours without motor damage

•400 hour motor life

•Sleek outside minimizes well hang ups

•Reliable and economical

•Comes ready for field use

WA-WSP-19V-2

Mega-Typhoon (Two Stage), Pumps 80 ft Max.

WA-WSP-24V-3

Tsunami (Three Stage), Pumps 100 ft Max.

WA-WSP-12V-3B

Super-Twister (Three Stage), Pumps 85 ft Max.

WA-WSP-24V-4

Monsoon (Four Stage), Pumps 120 ft Max.

WA-WSP-24V-5

Hurricane (Five Stage), Pumps 150 ft Max.

WA-WSP-24V-6

Mega-Monsoon (Six Stage), Pumps 200 ft Max.

WA-PA-10600

12 - 19 V Boost, Adjustable For WA-WSP-19V-2

WA-PA-10650

0 - 19 V Boost, Low Flow Adjustable For WA-WSP-19V-2

WA-PA-10700

12 - 24 V Boost, Adjustable For WA-WSP-24V-3 (4 Or 5 Stage)

WA-PA-10750

0 - 24 V Boost, Low Flow Adjustable For WA-WSP-24V -3 (4 Or 5 Stage)

WA-PA-10850 0 - 24 V, Adjustable, Low Flow, High Amp For WA-WSP-24V-6

WA-1/2-LDPE-100

Low Density Polyethylene, 1/2" O.D. x 3/8" I.D., 100 ft

WA-WSP-19V-2

MEGA-TYPHOON (Two Stage)

Pumps max. 80 ft

170 Watts Consumption, 18 Amps, 19 V 12" Length, 1.82" Diameter

Supplied with 90 ft of heavy duty 12 gauge wire and yellow connector

Compatible with Power Booster 1 (WA-PA-10600), or The Low Flow with Power Booster I Controller (WA-PA-10650).

WA-WSP-24V-3

TSUNAMI (Three Stage)

Pumps max. 100 ft 260 Watts Consumption, 22 Amps, 24 V 17" Length, 1.82" Diameter Supplied with 110 ft of heavy duty 12 gauge wire and green connector

Compatible with Power Booster II (WA-PA-10700), or The Low Flow with Power Booster II Controller (WA-PA-10750).

WA-WSP-12V-3B

SUPER-TWISTER (Three Stage)

Super-Twister is a revolutionary pump that has a Constant Voltage Booster Technology (CVBT) built in. With the new built-in booster will recognize the low voltage and the pump will start pulsating. The CVBT outputs a constant voltage to the Super-Twister Pump motors which reduces voltage due to battery drainage. Pumps max. 85 ft

18 Amps, 12 V

17" Length, 1.82" Diameter

Supplied with 90 ft of heavy duty 12 gauge wire and battery clamps

WA-WSP-24V-4

MONSOON (Four Stage)

Pumps max. 120 ft

310 Watts Consumption, 30 Amps, 24 V 20" Length, 1.82" Diameter

Supplied with 35 ft of heavy duty 12 gauge wire, cigarette plug and battery clamps

Compatible with Power Booster II (WA-PA-10700), or The Low Flow with Power Booster II Controller (WA-PA-10750).

WA-WSP-24V-5

HURRICANE (Five Stage)

Pumps max. 150 ft

360 Watts Consumption, 34 Amps, 24 V 26" Length, 1.82" Diameter

Supplied with 160 ft of heavy duty 10 gauge wire, green connector and mounted on a high impact plastic reel

Compatible with Power Booster II (WA-PA-10700), or The Low Flow with Power Booster II Controller (WA-PA-10750).

WA-WSP-24V-6

MEGA-MONSOON (Six Stage)

Pumps max. 200 ft

480 Watts Consumption, 40 Amps, 24 V 26" Length, 1.82" Diameter

Supplied with 210 ft of heavy duty 10 gauge wire, blue connector and mounted on a high impact plastic reel

Compatible with Low Flow with Power Booster III Controller (WA-PA-10850).

Ideal for Removing Samples from Shallow

Wells or Surface Water

Variable Speed Peristaltic Sampling Pump

Features

• Easy interface with speed control for exact sample size with no spilling

• Reversible motor for back flush of sampling hose

• Sample at any speed up to 500 ml per minute rate at 4 foot head

• Maximum lift 22 ft

•Lightweight, rugged and weather resistant enclosure

• 15 ft pickup hose with strainer provided

• The water sampler operates using an external 12 V DC power source

• The 10 ft power cord (supplied) is fitted with alligator clips for easy connection to any 12 V DC battery, such as a car battery or a small 12 V, 5AH gel cell

• Sample Hoses: 15 ft nylon reinforced 1/4" I.D. polyethylene flexible tubing section with intake strainer. Hose may be extended, as required, using standard 1/4" tubing and fittings.

• Expanded UV protected PVC (9" x 7.5" x 4.5"), 4.5 lbs

GW-SP200 Portable Sampling Pump Includes 15 ft Sample Hose & 10 ft Battery Cable (Bottle & Battery Not Included)

GW-00-010 12 V 5 AH Rechargeable Battery

GW-FE0400 Battery Charger (120 V AC to 12 V DC)

GW-00-546 Pickup Hose 1/4"

GW-CA0600 Pickup Strainer

GW-00-744 Peristaltic Pump Tubing

Waterra Spectra Field-Pro

Features

Spectra Field-Pro - a state of the art peristaltic pump that features a heavy-duty, all-inclusive design. This means no external cables, chargers or batteries to worry about.

•Heavy duty construction - constructed with top quality components

•Battery included - will run all day at full strength; outlasts competition

•Built-in VOA stand - allows easily sampling without spillage

•Advanced electronic flow controller - maintains a steady flow rate regardless of battery voltage; will not cut out during low flow sampling

• Built-in storage compartment - for charging cables, field book, tools, well key, etc.

•All cables included - to enable use of alternate (115 V AC) power source

Thermoplastic Elastomer (TPE) is a soft and flexible polymer with excellent physical properties, making it a good alternative for silicone tubing in peristaltic pumps. Use in the Spectra Field-Pro Peristaltic Pump.

Specifications Waterra Spectra Field-Pro

Dimensions 16.5" x 10.5" x 9"

Weight 23 lbs (10.45 kg)

Compatible

Tubing Sizes Masterflex sizes 15 through 36

Approximate Flow Rate 50 - 1900 ml/min

Battery

Dimensions 6.4" x 1.6" x 1.0", 3.5 oz

WA-SPECTRAFIELD Easy Load ll, Analog Controls, Internal Battery & Cables

WA-L/S-24

Thermoplastic Elastomer, 0.25" I.D., 25 ft Coil

WA-L/S-15 Thermoplastic Elastomer, 0.19" I.D., 25 ft Coil

The Portable Water Sampler

The Portable Water Sampler is designed for the ultimate in portability and versatility.  Run up to 4 hours on the self-contained 12 V DC rechargeable battery, or indefinitely from any AC or 12 V DC power supply.  Internal battery can be charged from an AC power supply, or a DC voltage source of lower voltaic potential than the battery itself.

PureSample™

Portable Bladder Pumps

Features

•Constructed of 316 Stainless Steel – For unsurpassed durability and truly representative samples

•Portable turnkey systems available –Everything you need to quickly and efficiently sample your site

•Single turn release housings – No special tools or training required to service the pump

•Quick-change bladder configuration –Bladders can be easily exchanged without tools by sliding back the Teflon® collars

•Extra bladders are readily available –Available in Teflon® and Polyethylene (1.66" pump only)

•Bonded tubing – In Polyethylene and Teflon® lined Polyethylene by the foot or by the roll

•Compatible with the PureS™ Control PRO™ & PureS™ Controller 2 Logic Units

Features

•Sample rate from 125 - 1100 ml/min

•Suction lift up to 26 ft

•IP54-rated when open or closed

•Features reversible flow and prime/purge function

• Variable speed operation

• 16" H x 11.3" W x 10.5" D, 16.5 lbs

BN-950-1990 Portable Sampler 115 V AC-50/60 Hz

BN-950-1995 Portable Sampler 230 V AC-50/60 Hz

Purge

The Portable Bladder Pumps were designed with input from field technicians who actually do the sampling! Single turn release heads and quick change bladders have been incorporated for quick in-the -field bladder changes and easy decontamination. Custom hose barbs allow the pump to be suspended without the need for tubing clamps.

PureSample™ Dedicated Pump

Features

• True low flow capacity with minimal agitation for more representative samples

• Proprietary long life PTFE bladder

• Constructed of electropolished 316 SS, PVC models available

• Extend bladder life with optional screened intake

& Sample Water in Wells as Small as 0.75"in Diameter

Control High Rate Purging & Gentle Low Flow Sampling

with the PureS™ Controller 2

PureS™ Controller 2

Features

•Microprocessor controlled

•Operates on 115 V AC or 12 V DC

•Rugged water tight case

•High pressure operation to 300 PSI

•Low flow sampling

•Built in pressure regulator and gauge

•High accuracy timers

•Adjustable fill rate control

•Simple to use, can be used with any bladder pump system

•Includes in line water trap

The PureS™ Control PRO Saves you Time, Saves your Back & Saves you Money!

PureS™ Control PRO™

The PureS™ Control PRO™ is the newest addition to long tradition of exceptional quality controls and bladder pumps.The ultra reliable minicompressor inside allows you to sample from depths to 180 feet! No more lugging heavy, dirty, and noisy compressors into the field or those dangerous nitrogen cylinders.

7.5 Amps 90 - 105 Watts usage

.25" OD push/pull fitting 1/8" FPT allows for connection to any fitting option Dimensions 6.28" D x 9.50" L x 9.50" W (15.95 cm D x 24.13 cm L x 24.13 cm W)

Composite / Discrete Water

Sampler

GW-WS700

Meets All Regulations for Sampling Requirements

Comes with a 2.5 gallon polyethylene sample bottle for collecting composite samples, a peristaltic sampling pump, a circuit board controller, and a rechargeable gel cell battery. Also provided is a sample pickup hose and a battery charger.

SpecificationsGW-WS700

Operating Temp 0° to +70°C

Materials

Enclosure Expanded UV protected PVC

Bottle 2.5 gallon Polyethylene

Pickup Hose 15' reinforced PVC 1/4" I.D. polyethylene flexible tubing section with intake strainer

Pump Tubing Norprene 1/4" I.D., 7/16" O.D.

Sample Pump

Features

•Ideal for wastewater, industrial and environmental sampling

•Does composite, discrete or both types of sampling

•Output provided for use with optional datalogger

•Rugged construction for harsh environments

• Timed and external flow proportional sampling

•Adjustable and repeatable sample volume

•Peristaltic pump prevents sample contamination

•Automatic backflush clears pickup strainer and hose

•Rechargeable battery or AC powered

Wastewater / Stormwater Sampler

GW-WS750

Specifications GW-WS750

Operating Temperature 0° to +70°C

Materials

Enclosure Expanded UV protected PVC

Bottles Two 1 gallon Polyethylene

Pickup Hose 15' reinforced PVC 1/4" I.D. polyethylene flexible tubing section with intake strainer

Pump Tubing Norprene 1/4" I.D., 7/16" O.D.

Sample Pump

Flow Rate 1000 ml per minute at a 4 foot head

Type Peristaltic

Maximum Lift ~20 ft

Battery Rechargeable 5 AH Gel Cell

Battery Life

One Pump running ~1 hr

Two Pumps running ~ 1/2 hr

Standby 3 months while still retaining enough power to run the pump to capacity

Start Delay 16 time settings from 0 to 12 hrs

Composite Interval 15 time settings from 5 min to 12 hrs plus an External Trigger mode setting

Sample Size 15 composite sample sizes from 50 ml to 2 liters plus a Full Bottle discrete setting (approximate sizes at 4 foot head)

Size Of Unit 22" H X 17" W X 9" D, 22 lbs

Comes with two 1 gallon polyethylene sample bottles for collecting composite samples, two peristaltic sampling pumps, a circuit board controller, and a rechargeable gel cell battery. Also provided are two sample pickup hoses and a battery charger. Provides a successful wastewater management or environmental monitoring program.

Flow Rate 1000 ml per minute at a 4 foot head

Type Peristaltic

Maximum Lift ~20 ft

Battery Rechargeable 5 AH Gel Cell, with ~1 hr, continuous pumping under load

Composite Interval 15 time settings from 5 min to 12 hrs plus an External Trigger mode setting

Sample Size 15 composite sample sizes from 50 ml to 2 liters plus a Full Bottle discrete setting

Size Of Unit 22" H X 17" W X 9" D, 20 lbs

GW-WS700

Composite/Discrete Water Sampler

GW-WS750

Wastewater/Stormwater Sampler

GW-FE0400

Battery Charger (120 V AC to 12 V DC)

GW-SMPL-AC AC Option For Powering The Sampler

GW-SP101 Solar Panel (80 mA)

GW-SP102 Solar Panel (300 mA)

GW-00419

2 Gallon Sample Bottle, Plastic For GW-WS700

GW-00418

1 Gallon Sample Bottle, Plastic For GW-WS750

GW-WS700R, Refrigerated Wastewater Sampler

The Refrigerated Wastewater Sampler comes with a 2 gallon polyethylene sample bottle for collecting refrigerated composite samples, a peristaltic sampling pump, a circuit board controller, and a rechargeable gel cell battery. Also provided is a sample pickup hose and a battery charger. Everything you need is provided for a successful wastewater management or environmental monitoring program.

Specifications GW-WS700R

Operating Temperature 0° to +70°C

Materials

Enclosure Expanded UV protected PVC

Bottles 2.5 gallon Polyethylene

Pickup Hose 15' reinforced PVC 1/4" I.D. polyethylene flexible tubing section with intake strainer

Pump Tubing Norprene 1/4" I.D., 7/16" O.D.

Sample Pump

Flow Rate 1000 ml per minute at a 4 foot head

Type Peristaltic

Maximum Lift ~20 ft

Power Internal 12 V Rechargable Battery with AC 120 V AC adapter/charger

Standby 3 months while still retaining enough power to run the pump to capacity

Start Delay 16 time settings from 0 to 12 hrs

Features

• Ideal for refrigerated wastewater, industrial and environmental sampling

• Simple to operate – no programming required

• Meets federal, state and local wastewater regulations

• Timed and external flow pulsed composite samples

• Adjustable and repeatable sample volume

• Peristaltic pump prevents sample contamination

GW-WQS, Water Quality Sampling System

SpecificationsGW-WQS

Operating Temp. 0° to +70°C

Materials

Enclosure Expanded UV protected PVC

Bottles 2.5 gallon Polyethylene

Pickup Hose 15' reinforced PVC 1/4" I.D. polyethylene flexible tubing section with intake strainer

Pump Tubing Norprene 1/4" I.D., 7/16" O.D.

Sample Pump

Flow Rate 1000 ml per minute at a 4 foot head

Type Peristaltic

Maximum Lift 20 ft

Battery Rechargeable 5 AH Gel Cell, with ~1 hr, continuous pumping under load

Composite Interval 15 time settings from 5 min to 12 hrs plus an External Trigger mode setting

Sample Size 15 composite sample sizes from 50 ml to 2 liters plus a Full Bottle discrete setting

Size Of Unit 22" H X 17" W X 9" D, 20 lbs

Sensor Display 5 digit + decimal place, LCD

Accuracy 0.1% of full-scale + .005 mA + Sensor Error

Analog Sensor Input 4 - 20 mA, 0 - 5 V, 0 - 1 V Jumper Selectable

Input Resolution 0.005 mA or 1.2 mV

Sensor Types / Units Water Level (Feet/Meters), Temperature (ºF/ºC), pH (no units), Dissolved Oxygen (%), Turbidity (NTU/ppm), Conductivity (µS), Wind Speed (MPH/KPH), Wind Direction (º), Soil Moisture (%), Sensor Data Range: 0.000 to 60,000 (60,000 in the display with 4 different decimal point positions)

Composite Interval 15 time settings from 5 min to 12 hrs plus an External Trigger mode setting

Sample Size 15 composite sample sizes from 50 ml to 2 liters plus a Full Bottle discrete setting (Approximate sizes at 4 foot head)

Size Of Unit 27" H X 20" W X 20" D, 40 lbs

GW-WS700R Refrigerated Wastewater Sampler

Comes with a 2 gallon polyethylene sample bottle for collecting composite samples, a peristaltic sampling pump, a circuit board controller, and a rechargeable gel cell battery. Also provided is a sample pickup hose and a battery charger.

GW-WQS-STD Water Quality Sampling System (Water Quality Sensors Not Included)

GW-WQ101

Temperature Sensor, -50°C to +50°C

GW-WQ201

pH Sensor, 0 - 14 pH

GW-WQ301 Conductivity, 0 - 5,000, 0 - 10,000, 0 - 20,000 Micro Siemens

GW-WQ401

Dissolved Oxygen Sensor, 0 To 100% Saturation

GW-WQ600 ORP/Redox Potential, -500 to +500 mV

Redi-Flo 2 Sampling Pump

The Redi-Flo 2 Pump is ideal for purging and sampling of groundwater from monitoring wells. The portable 115 V solid state converter allows adjustable flow rates from as low as 100 ml/min for sample collection to 9 gpm for purging. Flow rates are controlled with simple turn of the dial. The compact pump (11" L x 1.8" O.D.) is constructed of 316 stainless steel and virgin Teflon for sample compatibility. These chemically inert materials assure sample integrity and simplify decontamination.

The Redi-Flo 2 Pump can be used as a portable sampling pump to reduce the cost of your sampling program or as a dedicated pump, thus reducing the possibility of cross contamination. Teflon coated motor leads are available from 30 to 300 ft. If higher flow rates are required for groundwater depression and pump and treat applications, please contact ERE.

Did you know you can also RENT the Redi-Flo 2? TRY IT before buying it!

GR-1A00028

Rings, & Wear Plates)

Motor Lead Assembly (Includes Ground Motor Screw (4), Motor Lead Kit Screws, (4) Teflon Washers, (2) Brass Washers, (3) Grommet & (3) Crimped Pins)

GR-1A0019

Safety Cable Braket

Both High Flow Rates for Purging & Low Flow Rates for Sampling can be Achieved with the Redi-Flo 2

Swoffer Model 2100 Series & 3000 Series

Open Stream Current Velocity Meters

The Swoffer Current Velocity Meters are an easy means of measuring open stream velocities in the range of 0.1 to 25 ft/sec or 0.03 to 7.5 m/s (selectable). The sensor has a propeller-driven, photo-fiber-optic device with a 2" propeller sweep diameter. Measurements can be read in feet or meters on your choice of two digital readout indicator models, both with better than 1% accuracy.

Model 2100 Indicator

The Model 2100 accommodates all types of open flow streams – three selectable pre-set display update times (90 second maximum). Powered by a 9 V battery, its self-calibration feature allows you to check accuracy of the instrument while in the field. Precision quartz crystal controlled electronics provides accurate, precise data in all flow conditions.

Model 3000 Indicator

Designed for the measurement of open channel velocities and the on-site computation of stream discharges, the Model 3000 replaces the dial-style control of the 2100 with a keypad. The Model 3000 is a datalogging version of the 2100, and records depths, widths, velocities, flow angles along with time and date (stations).  It is also capable of measuring stream discharges. The velocity sampling interval is selectable from 1 to 999 seconds. The memory is capable of holding 1000 stations in up to 100 cross sections for later upload to a PC. Simple, accurate calibration is possible in the field, and calibration ratings for 10 different sensor options are stored. Powered by four "AA" size batteries, the Model 3000 is designed to function with Price type "AA" and Pygmy meters with or without optic sensors.

Sensor

The sensor uses a 2" propeller which rotates a fiber-optic bundle to create a signal from a photodiode to a photosensitive transistor. This signal is produced at a rate of four pulses per revolution and is transferred via flexible electrical cable to the indicator where it is processed to display velocity. The propeller is swivel mounted at the foot of the wand (handle). The wand carries the cable to its upper end from which the cable extends to the indicator. The sensor wands are aluminum alloy with stainless steel fasteners. The propeller is a glass impregnated nylon and all other plastic sensor parts are acetal-resin.

All models consist of the meter (2100 or 3000) and the Wand (-STDX,14, -1514 etc.). All Meter/Wand combinations listed below are “fieldready”, i.e., the following required equipment is included: Two sets of batteries ("AA" or 9 V), two complete propeller rotor assemblies, spare propeller, hands free harness and/or neck strap, sensor and cable assembly, wand, operating instructions (on paper and floppy disk), Model 3000 also includes DB9 style serial connector /cable and software for file transfers to a PC.

SW-2100-STDX Meter & 2.5 ft - 9.5 ft Telescoping Wand

SW-2100-LX Meter & 4.5 ft -19.5 ft Telescoping Rod

SW-2100-12 Meter & 2.7 ft Top Set Wading Rod

SW-2100-TSR-KIT

Meter (Adapts To Your USGS Top-Set Wading Rod)

SW-2100-1514

Meter & 12 ft Combination Wading Rod

SW-2100-1518

Meter & 4 m Combination Wading Rod

SW-2100-C140

Meter & 140 cm Top Set Wading Rod

SW-2100-C80 Meter & 80 cm Top Set Wading Rod

SW-3000-STDX

Meter/Datalogger & 2.5 ft - 9.5 ft Telescoping Wand

SW-3000-LX Meter/Datalogger & 4.5 ft - 19.5 ft Telescoping Rod

SW-3000-12

Meter/Datalogger & 2.7 ft Top Set Wading Rod

SW-3000-TSR-KIT

Meter/Datalogger (Adapts To Your USGS Top-Set Wading Rod)

SW-3000-1514

Meter/Datalogger & 12 ft Combination Wading Rod

SW-3000-1518

Meter/Datalogger & 4 m Combination Wading Rod

SW-3000-C140

Meter/Datalogger & 140 cm Top Set Wading Rod

SW-3000-C80

Meter/Datalogger & 80 cm Top Set Wading Rod

Flow Probe

Digital Water Velocity Meter

The Flow Probe is a highly accurate water velocity instrument for measuring flows in open channels and partially filled pipes. The water velocity probe consists of a protected water turbo prop positive displacement sensor coupled with an expandable probe handle ending in a digital readout display. The water flow meter incorporates true velocity averaging for the most accurate flow measurements. The Flow Probe is ideal for storm water runoff studies, sewer flow measurements, measuring flows in rivers and streams, and monitoring velocity in ditches and canals.

Specifications GW-FP111/FP211/FP311

Range 0.3 - 19.9 fps (0.1 - 6.1 mps)

Accuracy 0.1 fps

Averaging True digital running average, updated once per second

Sensor Type Protected Turbo-Prop propeller with electro-magnetic pickup

Weight 2 lbs (GW-FP111); 3 lbs (GW-FP211); 2.8 lbs (GW-FP311)

Lenght GW-FP111 = 3.7' to 6' ; GW-FP211 = 5.5' to 15' ; GW-FP311 = 2.5' to 5.5'

Materials Probe: PVC and anodized aluminum with stainless steel water bearing Computer: ABS/Polycarbonate housing with polyester overlay

Power Internal lithium battery, approx. 5 year life, non-replaceable Carrying Case The Flow Probe is shipped in a padded carrying case

Staff Gauges

Features

•Time proven basic visual reference of water level measurement

•Easy to see and read

•Available in many standard sizes

•Rugged and durable weather resistant design

•Applications include: bodies of water, wastewater treatment plants, flumes and weirs, visual flow measurements

Style C

The Style C staff gage is 2.5" wide and is available in separate lengths of 0 - 1.06 ft, 0 - 1.56 ft, 0 - 1.56 ft, 0 - 2.06 ft, 0 - 3.06 ft, 0 - 4.06 ft, and 3.06 - 5.06 ft. Style C also comes in standard 3.33 ft sections for a maximum height of 20 ft. Style C has graduations every 100th of a foot with numerical marks every foot and every tenth of a foot.

Style M

The Style M is a metric measurement staff gage that is 65 mm wide and is available in 1 meter sections. The Style M is divided into centimeters with each decimeter numbered. Separate figure plates (see below) can be fastened on a pier, wall or other surface next to the Style M staff gage to number any desired elevation.

Figure Plates

Separate numerical figure plates are available in 2" x 3", 3" x 4", 4" x 6" sizes. Figure plates are commonly used with Style M staff gages and are fastened to a pier or wall to mark custom elevations. Other sizes available.

ST-15424

Figure Plate #0

ST-15425

Figure Plate #1

ST-15426

Figure Plate #2

ST-15427

Figure Plate #3

ST-15428

Figure Plate #4

ST-15429

Figure Plate #5

ST-15430

Figure Plate #6

ST-15431

Figure Plate #7

ST-15432

Figure Plate #8

ST-15430

Figure Plate #9

ST-24187

Minus Figure (-)

ST-15402

Style C Staff Gauge, 0 - 1.06 ft

ST-15403

Style C Staff Gauge, 0 - 1.56 ft

ST-15404

Style C Staff Gauge, 0 - 2.06 ft

ST-15418

Style C Staff Gauge, 0 - 3.06 ft

ST-15419

Style C Staff Gauge, 3.06 - 5.06 ft

ST-43082

Style C Staff Gauge, 0 - 4.06 ft

ST-15405

Style C Staff Gauge, 0 - 3.33 ft

ST-15406

Style C Staff Gauge, 3.33 - 6.66 ft

ST-15407

Style C Staff Gauge, 6.66 - 10.00 ft

ST-15408

Style C Staff Gauge, 10.00 - 13.33 ft

GW-FP111

Flow Probe (3.7' To 6' Handle) Including Carrying Case

GW-FP111-S

Flow Probe (3.7' To 6' Handle W/Swivel) Including Carrying Case

GW-FP211

Flow Probe (5.5' To 15' Handle) Including Carrying Case

GW-FP311

Flow Probe (2.5' To 5.5' Handle) Including Carrying Case

ST-15409

Style C Staff Gauge, 13.33 - 16.66 ft

ST-15410

Style C Staff Gauge, 16.66 - 20.00 ft

ST-15411

Style C Staff Gauge, 20.0 - 23.33 ft

ST-15412

Style C Staff Gauge, 23.33 - 26.66 ft

ST-15413

Style C Staff Gauge, 26.66 - 30.00 ft

ST-15414

Style C Staff Gauge, 30.0 - 33.33 ft

ST-14509

Style C Staff Gauge, 33.33 - 36.66 ft

ST-14510

Style C Staff Gauge, 36.66 - 40.00 ft

ST-14511

Style C Staff Gauge, 40.00 - 43.33 ft

ST-15423

Style M Staff Gauge, 1 Meter Section

Heron DipperLog Groundwater Data Logger

The Heron DipperLog offers a wide range of sampling intervals with pressure ranges to 400 ft (120 m) water head with temperature. The dipperLog is a low cost data logger for continuously monitoring water levels and temperature in wells, boreholes and open bodies of water. Its small size allows the dipper-log to be used in well diameters as small as 3/4 of an inch (20 mm).The dipperLog is a durable & reliable ground water data logger. It is very easy to launch and even easier to download when used in conjunction with a barLog barometric logger. No need to open separate files, the Heron designed software does it all for you. Because of the unique “grab” of the barometric pressure during set up of the dipperLog there is no requirement for elevation correction. Down in the valley or on top of a mountain it is spot on every time. Also available on a reel or a completely submersible instrument.

Features

•Automatic elevation adjustment with short term static barometric compensation

•Long term automatic barometric compensation with the Heron barLog.

•Real time reading of height of water and temperature

•Rapid real time reading (10 measurements / sec) with text and graphing

•Compatible with the Heron dipperWave wireless remote reading system

•Easy field recalibration

•Comprehensive data management system is incorporated into the program

DipperWave System

The dipperWave system is a state of the art local wireless remote downloading system.

With the dipperWave installed you can download and change the logger parameters from as far away as as 1 km / 1000 yds without even approaching the well.

There is no need to approach the well, remove well caps or connect cables.

The dipperWave works in all weather and in darkness. This system will download a dipperLog with a full set of 32,000 data points in approximately five minutes ... without leaving your truck or office! Each dipperWave wellhead transmitter has a unique three digit address. Just select the address on the hand held base transmitter, wait 15 seconds for contact to be established and download the data directly onto your laptop. Logger parameters may be changed at this point.

HE-DIPPERLOG

DipperLog Water Level & Temperaure - Submersible

HE-PESSW Polyethylene Jacketed SS Suspension Wire - Submersible

HE-DRDHC

Direct Read Down Hole Cable - Well Head Read Out

HE-REEL500

Reel For Up To 500 ft / 150 m Cable - Includes Electronic Panel

HE-REEL1000

Reel For Over 500 ft / 150 m To 1000 ft / 300 m - Includes Electronic Panel

HE-GC

Graduated Cable (ft x 100th ft Only)

HE-2LWC

2" Lockable Well Cap

HE-SW

Software W/ PC Communication Cable

HE-TUFTAB

v7112xT Ultra Small Mobile PC (Software Included)

HE-BARLOG

BarLog For Barometric Compensation

HE-RS232USB RS232/USB Adapter

HE-DIPPERWAVE

The Wireless Remote DipperLog Control System

HE-HHT

Handheld Transceiver To Be Used W/ Laptop/PC - Communicates W/ 250 Loggers At One Site

HE-WHT

Wellhead Transceiver - 1 Per Logger Required

Economical Way to Operate your Data Loggers

Specifications HE-DIPPERLOG

Transducer Piezoresistive Silicone 316LSS

Ranges Min. 35 ft / 10 m, Max. 400 ft / 120 m

Overpressure Not to exceed 2 x full scale range

Accuracy 0.05% net FS, 0.10% net FS

Resolution 0.024% net FS

Operating Temperature -20° to +80°C

Temperature IC Temp. Sensor

Temperature Accuracy ± 0.5%

Variable

Sampling Mode Linear real time rapid data (10 readings sec) 1 sec to 255 hrs

Max. # Of Readings 32,000 sets

Communication USB, RS232

Barometric

Compensation Semi Automatic or barLog

Size 8.7" long x 0.75" diameter (small enough for a 1" well), 246 gr

Materials Stainless Steel, Viton

Heron Dipper-T Water Level Meter

Little Dipper Water Level Meter

Heron Skinny Dipper Water Level Meter

Features

• Unbreakable polycarbonate reels

• Durable polyester powder coated steel frame

• Corrosion resistant stainless steel fittings

• Soft grip vinyl frame handle

• Large ergonomic brake and winding handles

• Water and dust proof encapsulated electronics

• Probe size of 5/8"

• 5 year warranty

• Strong and accurate NTS certified tape with stainless conductors

• Carrying bag included

HE-101-15P Dipper-T Water Level Meter, 15 m (50 ft)

HE-101-30P Dipper-T Water Level Meter, 30 m (100 ft)

HE-101-60P Dipper-T Water Level Meter, 60 m (200 ft)

HE-101-100P Dipper-T Water Level Meter, 100 m (300 ft)

HE-101-150P Dipper-T Water Level Meter, 150 m (500 ft)

HE-101-200P Dipper-T Water Level Meter, 200 m (750 ft)

HE-TEMP Temperature Option

Waterra Water Level Meter

Features

•5/8"diameter 316 stainless steel probe

•Plastic reel, slim and lightweight

•Polyethylene coated 3/8"stainless steel flat tape is available in both metric (graduated to nearest mm) and imperial graduations (graduated to nearest 1/100 of a foot)

WA-WS-1

Waterra 30 m Water Level Meter

WA-WS-1L50

Waterra 50 m Water Level Meter

WA-WS-1L75

Waterra 75 m Water Level Meter

WA-WS-1L100

Waterra 100 m Water Level Meter

WA-WS-EL200

Waterra 200 m Water Level Meter

WA-WS-EL300

Waterra 300 m Water Level Meter

WA-WS-EL-500

Waterra 500 m Water Level Meter

Small, low cost meter with the same features as the Dipper-T water level meter!

Features

• Light weight and portability

• 75 ft / 22 m tape length

• Slim 3/8" stainless steel and Teflon probe

• 3 year warranty

• Certified intrinsically safe

• Carrying bag included

HE-LD-22P

Little Dipper Water Level Meter 22 m (75 ft)

Measures the depth of narrow water in wells, boreholes and standpipes. This specialized unit is designed for narrow tubes and piezometers.

Features

• Narrow 1/4"(6.25 mm) diameter tape and probe (not suitable for submergence)

• Length options of 100 ft & 300 ft

• 3 year warranty

• Stand alone, sturdy steel frame is coated in Polyurethane for durability

• Vinyl coated carry handle designed for comfort & easier rewinding

• Tape guide and third hand well casing hanger included

• Carry bag included

HE-SKINNYDIPPER/100FT

Skinny Dipper Water Level Meter, 100 ft

HE-SKINNYDIPPER/300FT

Skinny Dipper Water Level Meter, 300 ft

Sonic Water Level Meter

The Sonic Water Level Meter is an innovative approach for measuring water level in seconds without the use of down-hole probes or instrumentation, all while avoiding cross contamination. Imperial and Metric Units.

Specifications GW-WL650

Measurement Range NORMAL, 10 - 500 ft (3 - 152 m) or DEEP 200 - 1200 ft (61 - 366 m)

Sonic Measuring

Duct Diameter 5/8" (16 mm)

Batteries 8 "AA" dry cell

Operating Temperature 30 - 140°F (-1 to 60°C)

Use Sound Waves to Measure Water Level in Wells

GW-WL650

Sonic Water Level Meter

GW-WL610

Case For Sonic Water Level Meter

Ultrasonic Water Level Meter

The Ultrasonic Water Level Meter uses the latest ultrasonic distance measuring technology for accurate non-contact water level monitoring.

Specifications

•Rugged and fully encapsulated

•4 - 20 mA Transmitter

•Easy installation / no programming

•Operating Temperature: -40°F to 140°F

•Specify water level range: 1', 3', 6'

•Includes 10' cable

•-40° to 185°F (-40°C to 85°C) for (1.3 & 6 ft range)

•-40° to 145°F (-48°C to 62.8°C) for (35 ft range only)

The DepthMate Measures the Depth of Any Body of Water!

DepthMate Portable Sounder

Combining accuracy and portability, measure the depth of any body of water with this portable, digital depth sounder. Available in two models, one features a built-in transducer, and the other features an external transducer on a 12' cable, good for small cruising boats with too much freeboard. Waterproof to a depth of 150' (50 m) both sounders measure depths in feet or meters in a range of 1.8' to 260' (0.6 m to 79 m).

Kolor Kut Water Finding Paste "The Gauger’s Friend"

Upon contact with water, this golden brown colored paste turns a brilliant red, providing an accurate water gauge easily visible even under adverse lighting conditions. You can also use it to successfully gauge all petroleums and by-products for water content, plus sulfuric acid, nitric acid, hydrochloric acid, ammonia, soap solutions, salt and other chloride solutions.

ST-SM5

DepthMate Portable Sounder

ST-SM5A

DepthMate W/ External Transducer

KK-WFP

Kolor Kut Water Finding Paste, 3 oz Tube

Kolor Kut Gasoline Gauging Paste

Kolor Kut Gasoline Gauging Paste turns to a contrast of red upon contact with gasoline, diesel, naptha, kerosene, gas, oil, crude oil, jet fuels, and other hydrocarbons.

KK-GGP

Kolor Kut Gasoline Gauging Paste, 2.25 oz Jar

HERON Oil / Water Interface Probe

The Heron Oil/Water Meter rapidly and accurately measures depths to hydrocarbons and water in monitoring wells and tanks.  It is lightweight, battery operated, and constructed of a durable U.V. resistant engineered plastic with stainless steel fitting, quality designed to withstand years of rugged on-site use in extreme climate conditions. Best of all, it is inexpensive and very simple to use.

Features

• Large handles for easy use with gloved hands

• Available in English or metric units in graduations of 100th ft (1 mm)

• It can detect oil slicks as thin as 1/200' (1.52 mm).

• The probe is very slim 5/8" (15 mm) diameter stainless steel

• One year warranty

HE-100-15KYN Interface Probe, 50' (15 m)

HE-100-30KYN Interface Probe, 100' (30 m)

HE-100-60KYN Interface Probe, 200' (60 m)

HE-100-100KYN Interface Probe, 300' (100 m)

HE-100-150KYN Interface Probe, 500' (150 m)

AD-20 - Foaming Cleaner / Degreaser

AD-20 is a powerful water-based formula that quickly and safely penetrates and removes grease, oil, and carbon build up.  Designed to cling to surfaces, actually unlocking grease and oils so you can easily rinse with water, leaving a residue-free surface.

Biodegradable, Non-Flammable, Non-Combustible, Non-Caustic, Non Toxic (to OSHA and EPA), NonCorrosive

AD-20 Foam Cleaner / Degreaser

ORS Interface Probe

The ORS Interface Probe is a lightweight, battery operated well monitoring system that measures depths to oil and water in monitoring wells and tanks.  Its exceptionally rugged design and construction let it stand up to years of tough treatment.  It is built with a heavy-duty, weatherproof aluminum housing and a chemically resistant probe and tape. It comes with a standard one year warranty.

OR-1068017 Standard 100' (30 m) Interface Probe

OR-86050004 Smaller Diameter 100' (30 m) Interface Probe

Waterra Interface Probe

The Waterra InterfaceProbe uses sophisticated ultrasonic sensors to help define product layer.

Features

• Consists of ultrasonic sensor to detect the presence of hydrocarbons and conductivity sensor to detect water

• 5/8" diameter, 316 stainless steel probe

• Plastic reel, slim and lightweight

• Polyethylene coated 3/8"stainless steel flat tape is available in both metric (graduated to nearest mm) and imperial graduations (graduated to nearest 1/100 of a foot)

• 4 "AA"batteries

WA-HS-1

Waterra 30 m Interface Tape

WA-HS-1L50

Waterra 50 m Interface Tape

WA-HS-1L75

Waterra 75 m Interface Tape

WA-HS-1L100

Waterra 100 m Interface Tape

WA-HS-EL200

Waterra 200 m Interface Tape

WA-HS-EL300

Waterra 300 m Interface Tape

WA-HS-EL500

Waterra 500 m Interface Tape

Powdered Precision Cleaner Critical Cleaning Liquid Detergent

Alconox

Concentrated,anionic detergent for manual and ultrasonic cleaning. Free rinsing to give you reliable results without interfering residues. Ideal for cleaning contaminants from glassware, metals, plastic, ceramic, porcelain, rubber and fiberglass. Excellent replacement for corrosive acids and hazardous solvents. USDA authorized. Dilute 1:100. pH 9.5

AL-1104-1 4 lb Box

AL-1104

Case 9 x 4 lb Boxes

Concentrated, anionic liquid detergent for manual and ultrasonic cleaning. Free rinsing to yield reliable results with no interfering residues. Extremely mild and completely soluble in hard and soft water. USDA authorized. Dilute 1:100. pH 8.5

AL-1201-1

1

Strips Make Checking Water Easier than Ever!

Individual Test Strips

The Insta-Test® Test Strips are a great way to monitor water without having to use reagents or field kits. Test strips come in a pop-up container. Can be used in water testing applications such as drinking, food, beverage and pool.

LA-2997

Alkalinity, 0 - 180 ppm, 50 Tests

LA-2999LR Chlorine Dioxide, 0 - 10 ppm, 50 Tests

LA-3002 Chlorine Dioxide, 0 - 500 ppm, 50 Tests

LA-2979 Chlorine, Total, 0 - 5 ppm, 50 Tests

LA-2981 Hardness, Low Range, 0 - 180 ppm, 50 Tests

LA-2974 pH, Wide Range, 4 - 10 pH, 50 Tests

LA-3000 Peracetic Acid, 0 - 160 ppm, 50 Tests

LA-2984LR Peroxide, 0 - 50 ppm, 25 Tests

LA-2998-12 Sodium Chloride,

LeadCheck Aqua

LeadCheck Aqua is a complete system to screen for lead in potable water. This kit contains all of the materials required for an in-home easyto-use, sensitive and specific test for lead at 15 ppb or greater. Although the test is accurate at indicating the presence of lead, it is not intended to replace quantitative testing methods.

LeadCheck Liquids

LeadCheck for liquids is supplied as a complete test system for the detection of lead in antifreeze, industrial wastewater, manufacturing effluents, and groundwater at sensitivities of either 1 - 4 ppm (parts per million), or 0.25 - 0.75 ppm (parts per million). Each kit contains all of the materials required to provide on-site analysis of water samples. There are no hidden steps or additional laboratory fees. The entire test requires only 10 - 15 minutes to perform from start to finish. Based on a well established chemical test, LeadCheck for Liquids binds lead to a carrier that concentrates it onto a test strip. The strip is then tested for the presence of lead using a lead reactive dye.

Arsenic Naturally Occurring, Health Hazard for Humans

Arsenic Check

Arsenic Check is designed to provide a convenient method for the detection of arsenic in water. Arsenic Check for water is not intended to provide quantitative test results, and contamination at 10 ppb and higher can be reliably detected.

Use Arsenic Check for testing

• Ground water or mineral water

• Contamination from mining operations

• Semiconductor manufacturing

• Outdoor wood preservers

• Pesticide applications

Hanna Individual Test Kits

HA-3820

Acidity, 0 - 100 mg/l, 0 - 500 mg/L, Titration, 110 Tests

HA-38014

Total Alkalinity, 0 - 500 gpg, Titration, 100 Tests

HA-38049

Ammonia Nitrogen, Fresh Water, 0.0 - 3.0 mg/L NH3-N, Checker Disc, 100 Tests

HA-38018

Chlorine (As Cl2), Free, 0.00 - 0.70 mg/L Or 0.0 - 3.5 mg/L, Checker Disc, 200 Tests

HA- 3831F

Chlorine (As Cl2), Free, 0.0 - 2.5 mg/L, Colorimetric, 50 Tests

HA-38017

Chlorine (As Cl2), Free & Total, 0.00 - 0.70 mg/L or 0.0 - 3.5 mg/L, Checker Disc, 200 Tests

HA-3831T

Chlorine (As Cl2), Total, 0.0 - 2.5 mg/L, Colorimetric, 50 Tests

HA-3812

Hardness (As CaCO3), Total, 0.0 - 30.0 mg/L Or 0 - 300 mg/L, Titration, 100 Tests

HA-38035

Hardness (As CaCO3), Total & Calcium, Total: 0.0 - 20.0 gpg, Ca: 0.0 - 20.0 gpg, Titration, 100 Tests

HS-MTL3AS6 Arsenic Check For Water, 6 Tests/Kit

HA-3834

Total Iron, 0 - 5 mg/L, Colorimetric, 50 Tests

HA-3874 Nitrate Nitrogen, 0 - 50 mg/L, NO3--N, 100 Tests

HA-38050 Nitrate Nitrogen, Water: 0 - 50 mg/L, Soil: 0 - 60 mg/L, Checker Disc, 100 Tests

HA-3810

Dissolved Oxygen, 0.0 - 10.0 mg/L, Titration, 110 Tests

HA-38054 Ozone, 0.0 - 2.3 mg/L, Checker Disc, 100 Tests

HA-3833 Phosphate, 0 - 5 mg/L, Colorimetric, 50 Tests

HA-38000 Sulfate (As SO4-2), 20 - 100.0 mg/L, Turbidimetric, 100 Tests

HA-38058 pH, 4.0 - 10.0 pH. Checker Disc, 300 Tests

Bacteria Test Kit

The WaterCheck® Bacteria Test Kit is a simple to use screening tool to detect sewage contamination in water. The test determines the presence or absence of coliform and E. Coli bacteria, indicative of fecal pollution. WaterCheck® is sensitive enough to meet national drinking water standards of a single colony forming unit (CFU) per 100 ml of water. Water sample collection, mixing, incubation and observation are all done in the same sterilized plastic bag. Presence of a visible blue-green colour protects from the dangers of waterborne pathogenic micro-organisms.

BB-WATERCHECK

WaterCheck Bacteria Test Kit

ColiPlate® Test Kit

Features

• Reliable quantitative test for Coliforms and E. Coli

• Positive colour reaction (Coliforms) and fluorescence (E. Coli)

• Detects cfu’s ranging from 5 to 5000 per 100 ml without dilution

• ColiPlate has become the test of choice for numerous bacterial assessment, monitoring, education and research programs

BB-COLIPLATE Coliplate Bacteria Test Kit

Bug Check-BF

For counting bacteria & fungi in all types of industrial fluids.

Applications

Bioremediation, metalworking fluids, latex emulsions, e-coating (electrocoat) paint systems, cooling water, industrial waste waters, water, contaminated turbine oils, hydraulic fluids, foundry washes, etc.

BUGCHECK-BF 10 Tests/Kit

Biological Activity Reaction Test (BART)

The environment contains a slew of different bacteria that are all capable of causing problems ranging from slimes, plugging, discoloration, and cloudiness to corrosion and infections. The time taken for a colour change or reaction to occur gives a measure of the population size and level of activity of specific groups of organisms.

BART Kits include 9 BARTS except for the N-BART which contains 7, and reaction caps, test vial, BART ball, and full instructions.

DBI-IRB

Iron Related Bacteria

DBI-SRB

Sulfate Reducing Bacteria

DBI-SLYM

Slime Forming Bacteria

DBI-HAB

Heterotrophic Aerobic Bacteria

DBI-ALGE

Micro-Algae

DBI-FLOR

Fluorescent Pseudomonas

DBI-DN

Denitrifying Bacteria

DBI-N

Nitrifying Bacteria

DBI-APB

Acid Producing Bacteria

DBI-BOD

Biological Oxygen Demand

Hygiena

Most Cost-Effective ATP Hygiene Monitoring System Available

Ultrasnap - ATP Sample Testing Device

Ultrasnap is a user-friendly, all-in-one ATP sampling device used with the Hygiena SystemSURE Plus (HY-ATP200) luminometer. This pen sized sample collection device is easy-to-use, small and environmentally friendly.

Features

• Snap-Valve™ technology - snap & squeeze

• Premoistened swab bud

• Self-contained, liquid-stable reagent

• Write-on swab label

• Unprecedented accuracy and reproducibility

• Tolerant to temperature abuse

• Test wet or dry surfaces and liquid samples

• Results in 15 seconds

• Consistent, reliable results

•Shelf Life: 12 months at refrigerated temperatures (2 to 8°C) or 4 weeks at room temperature (21 to 25°C)

ATP hygiene monitoring provides accurate and traceable verification of the hygienic status of a surface or water, which is a key component of a good hygiene program! In conjunction with the Ultrasnap and Aquasnap testing devices, Hygiena SystemSURE Plus measures adenosine triphosphate (ATP), the universal energy molecule found in all animal, plant, bacteria, yeast and mold cells.

Features

•Optimizes and verifies that cleaning procedures are working

•Ensures product quality and extends product shelf life

• Optimizes chemical/sanitizer usage

•Assists in developing and improving certain HACCP procedures

•Simple to use – three step tests

•Engineered for durability and intensive use

•250 programmable test points per test plan

•20 programmable test plans

•Alphanumeric ID of locations

•Advanced photodiode technology

•Stores 2000 results

•Programmable user ID’s

•Self-calibration at startup

•Detects down to 1 femtomole (1 x 10-16 moles) of ATP

•Includes carrying case and neck strap

•Includes RS-232 interface cable & Software

Specifications

• 7.6 x 17.8 x 3 cm, 0.57 Ib

• "AA"battery powered (lasts up to 3000+ tests)

• PC compatible via RS232 cable or USB

Aquasnap ATP Water Testing Device

HY-ATP-351

Aquasnap is a user-friendly, self-contained ATP water sampling device used with the Hygiena SystemSURE Plus luminometer. This pen-sized sample collection device is easy to use, and collects 100 µl of water in the honeycomb-shaped dipper. Available for free or total ATP.

Applications

CIP Systems, cooling towers, water quality assessment, paper manufacturing & bioburden testing

Features

•Snap-Valve™ technology - snap & squeeze

•Honeycomb-shaped collection tip (100 µl)

•Self-contained, liquid-stable reagent

•Write-on swab label

•Bottle of ATP extractant

•Unprecedented accuracy and reproducibility

•Tolerant to temperature abuse

•Collects 100 µl of sample - no pipetting

•Results in seconds

•Consistent, reliable results

•Shelf Life: 12 month at refrigerated temperatures (2 to 8ºC) or 4 weeks room temperature (21 to 25ºC)

HY-ATP-150 Aquasnap - Total ATP Water Testing Device, 100/Case

HY-ATP-151 Aquasnap – Free ATP Water Testing Device, 100/Case

HY-ATP200

HY-ATP-350

HY-ATP-351

HY-ATP2020 Ultrasnap - ATP Sample Testing Device, 100/Case

Contamination Control Kit

The Contamination Control Kit is a high-precision test for measuring total and free ATP in liquid samples.

Calibration Control Kit

Key Benefits

•Detects microbial and nonmicrobial contamination

•Uses liquid-stable reagents versus lyophilized - 4 bottles versus 20 vials

•Extended shelf life - 12 months

•Offers flexibility when dealing with challenging samples

•Ideal solution for measuring contamination in process water, wastewater, water tanks and cooling towers

•Kit includes all components plus ATP standard

Positive Control Kit

Calibration Control Rod Kits should be used to verify calibration of Hygiena systemSURE Plus luminometers. Each kit is comprised of a Positive rod and a Negative rod. The Positive Rod emits a very low level of low-energy radiation in a plastic scintillation matrix. This matrix is configured to give constant light output, within 10% of its original value, at sufficiently high level for up to five years. The Negative Rod produces lowlight or zero (0) RLU background and is used to check that background light is not entering the instrument or ensure that the light detector is calibrating correctly. Hygiena SystemSURE Plus luminometers are designed to self-calibrate at startup, but it is recommended to verify calibration with the Calibration Control Kit.

Features

• Easy-to-use and quick

• Good for 5 years

The Hygiena Positive Control Kit is intended to be used for validating the efficacy and quality of Ultrasnap (HY-ATP2020). The kit comes with 25 sealed glass vials containing approximately 5 x 10-13 moles of lyophilized Adenosine Triphosphate (ATP) and sugars to provide a predictable result. It is recommended that Positive Controls be used to test devices on a random basis or whenever there is concern about the product's storage temperature or shelf life.

Features & Benefits

•Shelf Life: 12 months at refrigerated temperatures (2 to 8ºC)

•Meets GMP requirements

•Validates results and equipment for audits

The Professional’s Choice for All Types of Water Tracing Projects

Tablets: Dissolve in 5 - 8 Minutes

Bright Dyes™ Fluorescent Dyes

Features

• All colors are bright and vivid. They can be detected visually in clear, deionized water in the range of 100 parts per billion (ppb) of active ingredient, depending on local conditions.

• Choice of color should be based on the contrast to the background of the water body. For instance, red offers greater contrast to heavy concentrations of green algae.

• Red, orange, and yellow-green, because of their fluorescent nature may afford greater apparent contrast than non-fluorescent blue

•Fluorescent dyes also may be detected visually with a simple hand-held laboratory black light (U.V.) at significantly lower levelsin the range of 10 ppb in ideal conditions.

• Blue is frequently used for decorative effects, evaluation of household systems, and generally where blue color may be more acceptable to public view.

• Red, orange and yellow/green are sometimes used jointly in dual tracing studies - both visually and fluorometric analysis.

• Some information on the final chart below (resistance to absorption on suspended matter, sunlight resistance and environmental suitability) is also relevant to visual detection at low dye usage levels.

Hanna, pHep®4 & pHep®5

These testers use the exclusive replaceable pull-out cartridge pH electrode. Its exposed temperature sensor provides fast response time and its proximity to the pH electrode guarantees much more accurate temperature compensated readings.

include protective cap, electrode removal tool, 4 x 1.5 V batteries and instructions.

Hanna ORP Tester

HA-98127 pHep® 4

HA-98128

pHep® 5

HA-7061M Electrode Cleaning Solution, 230 ml Bottle

HA-73127

Spare Electrode For pHep® 4 & pHep® 5

HA-7004/1L pH 4.01 Buffer Solution, 1 L Bottle

HA-7006/1L pH 6.86 Buffer Solution, 1 L Bottle

HA-7007/1L pH 7.01 Buffer Solution, 1 L Bottle

HA-7009/1L

pH 9.18 Buffer Solution, 1 L Bottle

HA-7010/1L

pH 10.01 Buffer Solution, 1 L Bottle

This new micro-processor based tester provides the most advanced solution in ORP and Temperature measurement. Further, the HA-98121 provides pH measurement.

Features

•Replenishable junction

•Dual level LCD

•Battery life percentage indication

•Stability indicator

•Floating and waterproof body

HA-98120 and HA-98121 include protective cap, electrode removal tool, 4 x 1.5 V batteries and instructions.

Hanna Dist® 5 & Dist® 6 EC/Temp/TDS Testers

Unmatched 3-in-1 tester measuring Electrical Conductivity, Temperature and Total Dissolved Solids in one small compact unit.

Features

• Floating waterproof casing

• Dual level LCD displays

• Replaceable graphite probe

0.0 to 2.4%/°C

Dimensions 6.4" x 1.6" x 1.0", 3.5 oz

HA-98120

ORP/Temperature Tester

HA-98121

ORP/pH/Temperature Tester

HA-73120 Spare ORP Electrode For HA-98120

HA-73127 Spare pH Electrode

HA-7020M 200/275 mV Test Solution, 230 ml Bottle

HA-7091M Reducing Solution, 230 ml Bottle

HA-7092M Oxidizing Solution, 230 ml Bottle

HA-7061M Electrode Cleaning Solution, 230 ml Bottle

HA-7004/1L

Dist® 5 and Dist® 6 include protective cap, electrode removal tool, 4 x 1.5 V batteries and instructions.

HA-98311

HA-73311

HA-7031L

HA-7032L

HA-70038P

Hanna Combo pH/EC/Temp/TDS Testers in one Unit!

Unmatched 4-in-1 tester measuring pH, Electrical Conductivity, Temperature and Total Dissolved Solids in one small compact unit.

Features

• Floating waterproof casing

• Dual level LCD displays

• Replaceable graphite probe

HA-98129 and HA-98130 include protective cap, electrode removal tool, 4 x 1.5 V batteries and instructions.

Dissolved Oxygen Tracer

Features

•Oxygen level displayed as % Saturation from 0 to 200.0% or Concentration from 0 to 20.00 ppm (mg/L)

•Adjustable Altitude Compensation (0 to 20,000 ft in 1,000 ft increments)

•Adjustable Salinity Compensation from 0 to 50 ppt

•Memory stores up to 25 data sets with DO and temperature reading

•Self-calibration on power up; data, hold, auto power off, low battery indicator

•Waterproof to IP67

•Optional 3 ft (1 m) or 16 ft (5 m) extension cable

•Powered by four 1.5 V CR-2032 batteries

HA-98129 Combo pH/EC/Temp/TDS Tester

HA-98130 Combo pH/EC/Temp/TDS Tester

HA-73127 Spare pH Electrode For Combo

HA-70030P 12.88 mS/cm Conductivity Calibration Solution, 20 ml Sachet, 25/Pack

HA-70031P 1413 mS/cm Conductivity Calibration Solution, 20 ml Sachet, 25/Pack

HA-70032P 1382 ppm TDS Calibration Solution, 20 ml Sachet, 25/Pack

HA-70038P

HA-70442P

Solution, 1 L Bottle HA-7007/1L pH 7.01 Buffer Solution, 1 L Bottle

HA-7009/1L pH 9.18 Buffer Solution, 1 L Bottle

HA-7010/1L pH 10.01 Buffer Solution, 1 L Bottle

Total Chlorine Tracer

Features

•Can be used to test pH and ORP with interchangeable flat surface sensors

•Read Total Chlorine from 0.00 - 10 ppm

•Automatic self-calibration

•Memory can store up to 15 readings

•Follows EPA protocol for ISE methods

•Waterproof design

•Automatic shut-off and Low Battery indicator; uses four 3 V CR-2032 batteries

Total Chlorine Tracer includes unit, with 100 reagent tablets.

Total Chlorine Tracer

Chlorine Test Tablets

Stand W/ Five 20 ml Sample Cups

pH Sensor, 0 - 14

ORP Sensor

Total Dissolved Oxygen Tracer complete includes DO electrode, protective sensor cap, spare membrane cap, electrolyte, four 1.5 V CR-2032 batteries, and 48" neckstrap.

LA-1761

Dissolved Oxygen Tracer

LA-1761M

DO Membrane Kit (6 Screw-On Membranes & Solution)

LA-1763

DO Extension Cable, 1 Meter

LA-1764

DO Extension Cable, 5 Meters

Extended Range pH Meters!

Hanna Instruments

HA-991001, HA-991002 & HA-991003

These lightweight and compact units offer IP 67 waterproof protection in a compact casing. The electrode has a built-in temperature sensor and amplifier, to safe guard your measurements to noise and electrical interference. The HA-991001 reads pH and temperature, and the HA991002measures ORP in the ± 1999 mV range as well. HA-991003 is the first pH meter that can measure pH, pH-mV (to check the electrode status), ORP and temperature with only one probe.

HA-991001, HA-991002, and HA-991003 include HA-1296D pH electrode (HA-991001) or HA-1297D (HA-991002, and HA-991003), and internal temperature sensor, pH 4 and pH 7 buffer sachets, HA-700661 electrode cleaning solution (2 x 20 ml), 3 x 1.5 V "AA" batteries, rugged carrying case and instructions.

Waterproof Multi-Range EC & TDS Meters with Temperature Compensation for Field Applications

HA-9033 & HA-9034

HA-9033 and HA-9034 have been proven time and again to hold up under extended use in wet, humid, dusty and muddy conditions. HA-9033utilizes a single probe to perform all conductivity readings in four ranges.  This allows the user to measure samples from deionized water to brine without having to switch or recalibrate the probe. HA-9034 measures total dissolved solids (TDS) in three ranges to offer the highest accuracy when performing measurements in diverse applications such as HVAC, waste water treatment and reverse osmosis.

HA-9033 and HA-9034 include HA-76302W probe with internal temperature sensor and 3.3' (1 m) cable calibration screwdriver, 1 x 9 V battery, rugged carrying case and instructions.

4-in-1: pH, EC, TDS & Temperature in a Waterproof Casing

HA-70300L Electrode Storage Solution, 500 ml Bottle

HA-7061L Electrode Cleaning Solution, 500 ml Bottle

HA-991300 & HA-991301

Both instruments provide full-scale pH readings and allow the user to select the temperature readout in Centigrade or Fahrenheit. Other features include automatic calibration, automatic temperature compensation, selectable EC/TDS conversion factor, adjustable conductivity temperature coefficient, dual level LCD, stability indicator, Battery Error Prevention System and battery percentage gauge indicating battery strength.

HA-991300 and HA-991301 include HA-1288 pH/EC/TDS/°C probe with 1 m cable, 4 x 1.5 V "AAA" batteries, instruction manual and hard carrying case.

HA-9124 & HA-9125

HA-9124 measures pH and °C and HA-9125 measures ion concentration and ORP in the mV range. Both meters are housed in rugged, waterproof, ABS casings that are built to last.

HA-9124 and HA-9125 include HA-1230B combination double junction, gel-filled pH electrode, HA-7662 stainless steel temperature probe with 1 m (3.3”) cable, 4 x 1.2 V "AAA" batteries, pH 4.01 & 7.01 buffer solutions (20 ml sachets), 100 ml plastic beaker, HA-710044 inductive recharger with power adapter, instruction manual and rugged carrying case.

Model 1200 – Single Test Colorimeter Labs

The 1200 Series of Single Test direct reading colorimeters incorporates design advances that enhance reliability, improve accuracy and simplify the calibration process, all in a portable, hand-held package. Each Single Test Colorimeter Lab comes complete with six sample vials with screw caps, instruction manual, and sturdy carrying case. Please see ordering information for details on number of tests.

LA-3680-01

Ammonia Nitrogen, 0 - 5.0 ppm

LA-3672-01

Bromine, 0 - 7.0 ppm

LA-3670-01

Chlorine (Free & Total), 0 - 4.0 ppm

LA-3670-01-LI

Chlorine (Free & Total), 0 - 4.0 ppm

LA-3671-01

Chlorine Dioxide, 0 - 7.0 ppm

LA-3673-01

Copper, 0 - 6.0 ppm

LA-3674-01

Fluoride, 0 - 2.0 ppm

LA-3681-01

Iron (Total), 0 - 4.0 ppm

LA-3682-01

Manganese, 0 - 0.7 ppm / 0.01 ppm Mn

LA-3676-01

Molybdenum,

SMART2 and COD Plus Colorimeters

Ideal for Complete On-Site Water Analysis

Features

•Simple menu-driven operation - with an 80+ test capacity; with 70+ preprogrammed tests in library and 10 user-entered tests

•Alphabetical test selection, and self diagnostics with error/warning messages

Call for a List of Other Reagents Available!

SMART2 Colorimeter includes 4 sample tubes, AC adapter and manual.

COD PLUS includes COD adapter, 4 sample tubes, AC adapter and manual.

LA-1919 SMART2

LA-1922

COD PLUS

LA-1754

AC Power Adaptor (Variable 100 - 240 V AC)

LA-1912-CD

SMARTLink2 Program & Interface Cable

LA-1919-GCS440

Large Carrying Case

LA-0075-SC

COD LR 0 - 150 W/ Mercury, 0 - 150 ppm, 25 Tests

LA-0072-SC

COD LR 0 - 150 W/O Mercury, 0 - 150 ppm, 25 Tests

LA-0076-SC

COD LR 0 - 1,500 W/ Mercury, 0 - 1500 ppm, 25 Tests

LA-0077-SC

COD HR 0 - 15,000 W/ Mercury, 0 - 15000 ppm, 25 Tests

LA-0074-SC

COD HR 0 - 15,000 W/O Mercury, 0 - 15000 ppm, 25 Tests

LA-3700-SC

pH SMART2 Reagent System, pH 6.6 - 8.4 ppm, 100 Tests

LA-3642-SC

Ammonia Nitrogen, 0 - 4.0 ppm, 50 Tests

LA-3640-SC

Copper, 0 to 3.5 ppm, 50 Tests

LA-3646-SC

Copper, 0 - 6.0 ppm, 100 Tests

LA-3699-02-SC

Molybdenum, 0 - 15 ppm, 50 Tests

LA-4031

Lead, 0 - 5.0 ppm, 50 Tests

LA-3668-SC

Iron, 0 - 5 ppm, 50 Tests

LA-3687-SC

Silica, 0 - 50 ppm, 50 Tests

LA-3664-SC

Silica, 0 - 2.5 ppm, 100 Tests

LA-3655-SC

Phosphate, 0 - 70 ppm, 50 Tests

LA-3653-SC

Phosphate, 0 - 3.0 ppm, 50 Tests

LA-3688-SC

Dissolved Oxygen, 0 - 12 ppm, 100 Tests

LA-3647-01-SC

Fluoride, 0 - 2 ppm, 50 tests

LA-3662-SC

Hydrogen Peroxide, 0 - 1.5 ppm, 100 Tests

SMART SPECTRO Spectrophotometer

Call for a List of Other Reagents Available!

Features

• Over 80 pre-programmed tests and up to 25 calibrations for additional tests can be entered into the memory

• Extremely high resolution and a wider wavelength range

SMART SPECTRO Spectrophotometer includes 6 sample cells (25 mm round), 2 sample cell holders (25 mm round and COD, 10 mm cuvettes), power supply, battery charger, and diagrammed manual.

LA-2000 SMART SPECTRO

LA-1922 COD PLUS

LA-2000-BP

Battery Pack W/ Holder (Rechargeable)

LA-1912

SMARTLink2 Program & Interface Cable (Specify CD Or Diskette)

LA-2000-CS

Carrying Case

LA-3700-SC

pH SMART2 Reagent System, pH 5 - 9.5 ppm, 100 Tests

LA-3642-SC

Ammonia Nitrogen, 0 - 4.0 ppm, 50 Tests

LA-3640-SC

Copper, 0 - 3.5 ppm, 50 Tests

LA-3646-SC

Copper, 0 - 6.0 ppm, 100 Tests

LA-3699-02-SC

Molybdenum, 0 - 15 ppm, 50 Tests

LA-4031

Lead, 0 - 5.0 ppm, 50 Tests

LA-3668-SC

Iron, 0 - 5 ppm, 50 Tests

LA-3687-SC Silica, 0 - 50 ppm, 50 Tests

LA-3664-SC Silica, 0 - 2.5 ppm, 50 Tests

LA-3655-SC Phosphate, 0 - 70 ppm, 50 Tests

LA-3653-SC Phosphate, 0 - 3.0 ppm, 50 Tests

LA-3688-SC

Dissolved Oxygen, 0 - 12ppm 100 Tests

LA-3647-01-SC

Fluoride, 0 - 2 ppm, 50 tests

LA-3662-SC

Hydrogen Peroxide, 0 - 1.5 ppm, 100 Tests

Digestion Tubes for Total Nitrogen and Total Phosphorous

Low and high Total Phosphorous and a Total Nitrogen test that are reacted in a heater block and are then tested using a colorimeter or spectrophotometer. This ships as Small Quantity Hazardous Materials.

LA-4024

Low Total Phosphorus, 0 - 3.5 mg/L, 25/Tests

LA-4025

High Total Phosphorus, 0 - 100 mg/L, 25/Tests

LA-4026

Total Nitrogen, 0 - 25 mg/L, 25/Tests

COD Heater Block

Perfect for COD, Total Phosphorus, and Total Nitrogen, testing plus other tests requiring digestion.

Features

• A digital microprocessor control

• Programmable time (0 - 999 minutes)

• Programmable temperature settings (30 - 200°C)

• Vial capacity of 12 (16 mm) tubes

Multi-Range COD Reagent Systems

Chemical Oxygen Demand reagent systems used with the COD PLUS Colorimeter, SMART2 Colorimeter, or SMART Spectro Spectrophotometer are an easy and precise way to measure COD levels. Low, medium or high levels of COD can be selected using your choice of mercury (USEPA approved method) or non-mercury reagent systems. Each package contains 25 ready to use vials. This ships as Small Quantity Hazardous Materials.

LA-5-0102

COD Heater Block, 120 V

LA-5-0102-EX2

COD Heater Block, 230 V

TC-3000 Tri-Meters

Features

•Ideal for testing low-level drinking water applications as well as monitoring high turbidity in the field

•Supports six languages: English, French, Spanish, Japanese, Portuguese and Italian

•Datalogging up to 4000 points with a date and time stamp - stored tests can be viewed on the meter or downloaded to a PC

•Easy menu-driven operation, less than 5 seconds response time

•Available in either USEPA 180.1 Standard or ISO 7027 compliant versions

TC-3000 includes 0, 1 and 10 NTU standards, sample bottle, 4 sample tubes, DPD tablets and an extra battery.

SpecificationsTC-3000

Color Range 0 to 500 cu Power 9 V battery

LA-0075-SC 0 - 150 ppm EPA Approved - Mercury Based

LA-0076-SC 0 - 1500 ppm EPA Approved - Mercury Based

LA-0077-SC 0 - 15,000 ppm EPA Approved - Mercury Based

LA-0072-SC 1 - 150 ppm, Mercury-Free

LA-0073-SC 0 - 1500 ppm, Mecury-Free

LA-0074-SC 0 - 15,000 ppm, Mercury-Free

LA-1964-EPA TC-3000 Kit, EPA Version

LA-1964-ISO TC-3000 Kit, ISO Version

LA-1754 AC Power Adaptor (Variable 100 - 240 V AC)

LA-1912-CD SMARTLink2 Program & Interface Cable (Specify CD Or Diskette)

LA-0641

Vial Ring, 2/Pack

LA-1480

0 NTU Standard (EPA & ISO), 60 ml

LA-1484 (1)

1 NTU Standard, 60 ml EPA (ISO)

LA-1485 (2)

10 NTU Standard, 60 ml EPA (ISO)

LA-1486 (3)

100 NTU Standard, 60 ml EPA (ISO)

LA-6195-H Formazin Standard Solution, 4000 NTU, 60 ml

LA-4140

DPD Chlorine Secondary Standards Kit

LA-3176-01

FAS-DPD Titration Kit For Chlorine Titration

LA-6973-H Standard Chlorine Solution, 250 ppm, 60 ml

LA-3858-H

Permanganate Solution, 1000 ppm, 60 ml

LA-6903A-J

Chlorine DPD #1 Instrument Grade Tablets (100/Box)

LA-6197A-J

Chlorine DPD #3 Instrument Grade Tablets, (100/Box)

HA-96711C

Free & Total Chlorine

Specifications HA-96711C

Free Chlorine Range 0.00 to 5.00 mg/L

Total Chlorine Range 0.00 to 5.00 mg/L

Precision ± 0.02 mg/L to 1.00 mg/L

Light Source Tungsten lamp with narrow band interference filter 525 nm

Light Detection Silicon Photocell

Dimensions 8.5" X 3.3" X 2.5", 0.9 lb

Total chlorine is equal to the sum of free chlorine plus combined chlorine: free chlorine combines with nitrogen to form chloroamine. Chloroamine harms aquatic life and water treatment plants. Chloroamine concentration is dependent on pH, temperature, the initial ratio of chlorine versus amine, chlorine demand and time of reaction.

HA-96711C includes 2 sample cuvets with caps, 3 Cal Check cuvets, 20 reagent powder packets, cuvet cleaning cloth, 9V battery, scissors and instruction manual in a hard carrying case.

Chlorine & Turbidity in One Meter

Useful for Potable Water & Municipalities

Hanna, HA-93414

The new HA-93414 meets the requirements of USEPA and Standard Methods for Turbidity and Colorimetric Chlorine Measurements. The instrument features the all new Tag Identification System which allows users to record time and place at unlimited specific measurement locations. Logged data can be downloaded through USB or RS 232. Includes exclusive Cal Check system and ready-made NIST traceable standards.

HA-93414 includes portable chlorine and turbidity meter, supplied complete with five sample cuvets and caps, three calibration cuvets for turbidimeter, two calibration cuvets for colorimeter, reagent powder packets for free and total chlorine, silicone oil, five tag holders with tags, scissors, batteries (4), AC adapter, rugged carrying case, instruction manual, quick reference guide and instrument quality certificate.

Specifications HA-93414

Free Chlorine Range 0.00 to 5.00 mg/L, ± 0.02 mg/L @ 1.00 mg/L accuracy

Total Chlorine Range 0.00 to 5.00 mg/L, ± 0.02 mg/L @ 1.00 mg/L accuracy

HA-93414

HA-93701-01

Powder

HA-93711-01

Powder Reagents For 100 Tests (Total Chlorine)

Turbidity / Resolution Range 0.00 to 9.99 (0.01); 10.0 to 99.9 (0.1) and 100 to 1000 (1) NTU, ± 2% of reading plus 0.02 NTU accuracy

Calibration One-point calibration for Chlorine. Two, three or four-point calibration for Turbidity

Light Detector Silicon Photocell

Dimensions 8.8" x 3.4" x 3.0", 18 oz

Portable Turbidity Meter Capable of Delivering Lab-Grade Accuracy

HANNA, HA-98703 EPA Compliant Turbidity Meter

The new HA-98703 uses EPA compliant tungsten light source and state-of-the art optical system that allow consistently reliable and accurate measurements of turbidity. The instrument features the all new Tag Identification System which allows users to record time and place at unlimited specific measurement locations. Logged data can be downloaded through USB or RS 232. Includes exclusive Cal Check system and ready-made NIST traceable standards.

HA-98701-01 (115 V) includes (5) sample cuvets and caps, HA-98703-11 calibration cuvets, HA-93703-58 silicone oil, cuvet wiping tissue, (4) batteries, AC adapter, instruction manual and rugged carrying case.

2020e Portable Turbidity Meter

The 2020e sets a new standard for laboratory accuracy in an extremely compact, portable instrument for turbidity measurement.

Features

•Six user selected languages

•4000 point data log - results can be downloaded to a PC

•MSP430 Microcontroller - most advanced controller on the market for hand held applications

2020e Turbidity Meter Kit includes AC adaptor, four optically selected sample vials with screw caps, standardization package consisting of 1.0 NTU and 10.0 NTU standards, an extra battery, instruction manual and sturdy carrying case. (AC Power adapter is optional)

Meter Kit with Calibrator includes all of the above with BNC calibration cable.

LA-1979-EPA

Portable Turbidity Meter, Meets USEPA Design Criteria

LA-1480

0 NTU Standard, 60 ml

LA-1484

1 NTU Standard, 60 ml

LA-1485

10 NTU Standard, 60 ml

LA-1486

100 NTU Standard, 60 ml

LA-1754

AC Power Adapter

LA-1772

RS-232 Cable

Hanna, HA-9146-04 & HA-9146-10

Water resistant, micro-processor based dissolved oxygen meter with automatic calibration and temperature compensation. DO measurements can be displayed in ppm or in % saturation.

HA-9146-04 and HA-9146-10 include HA-76407/4F probe with 4 m (13') cable for HA-9146-04 and HA-76407/10F 10 m (33') for HA-9146-10, protective cap, 2 spare membranes, HA-7041S electrolyte solution (30 ml), 4 x 1.5 V batteries, hard carrying case and instructions.

Specifications HA-9146-04 HA-9146-10

O2 Range 0.00 to 45.00 mg/L, ± 1.5% F.S. accuracy

% Saturation O2 Range 0.0 to 300.0% ± 1.5% F.S. accuracy

Temperature Range 0.0 to 50.0°C ± 0.5°C accuracy

Calibration automatic, in air, at 100%

Probe with 4 m (13’) cable with 10 m (33’) cable

Dimensions 7.7" x 3.1" x 2.4", 1.1 lbs

HA-9146-04

Portable Dissolved Oxygen Meter, 4 m Cable

HA-9146-10

Portable Dissolved Oxygen Meter, 10 m Cable

HA-7041S

Electrolyte Solution For DO Probe, 30 ml

HA-710005

115 V AC / 12 V DC Power Adaptor

HA-710006

230 V AC / 12 V DC Power Adaptor

HA-76407A/P

Spare Membrane (5 Pieces)

Turbidity Sensor (GW-WQ720) & Turbidity Meter (GW-WQ770-B)

The Turbidity Sensor is an accurate submersible sensor for in-situ environmental or process monitoring.  Applications include, rivers, streams, reservoirs, groundwater, water treatment, wastewater treatment, effluent, and industrial control.  The Turbidity Meter combines the sensor with an LED light display, 4-button control, and internal battery.

SpecificationsGW-WQ720 & GW-WQ770-B

Range 0 to 50 NTU & 0 to 1000 NTU

Accuracy ± 1% of full scale

Pressure 0 to 30 psi

Size Body = 1.1" D x 8.5" L / Sensor Shield = 1.5" x 2" Overall Length = 9"

Power Required 10 to 36 V DC @ 40 MS (Sensor); Internal 9 V DC Battery (Meter)

Outputs 4 - 20 mA (Sensor, both ranges), LED screen (Meter)

Warm-Up Time 5 seconds

Dimensions 1.5" x 8.5", 2 lbs

Portable DO Meter for Field Applications

GW-WQ720 Turbidity Sensor, 25' Cable Length

GW-WQ770-b Turbidity Meter, Includes Sensor On 25' Cable Length

Choose your electrode:

Ammonia, Bromide, Cadmium, Calcium, Carbon Dioxide, Chloride, Cupric, Fluoride, Iodide, Lead, Nitrate, Potassium, Silver, Sulfate and Sulfide

HA-98185 Portable pH, ORP and ISE

Ease of use and high-end features come together in this new family of instruments. For use in the field, these instruments can be easily operated with one hand and are housed in a rugged waterproof casing. The meter also includes direct ion concentration determination with ISE’s.

The HA-98185 allows a choice of measurement units (ppm, ppt, g/L, mg/L, ppb, ug/L mg/mL, M, mol/L, mmol/L % w/v, user) and electrode selection type. Up to 5 point calibration with 6 standard solutions. Users are guided through the calibration procedure with step-by-step on-screen instructions.

The LCD of the instrument also displays electrode type used, current temperature, remaining battery life and time.

HA-98185 includes combined pH/Temperature electrode, pH 4.01 and pH 7.01 buffer solutions, (4) 1.2 V "AA", 1300 mAh rechargeable batteries, inductive battery charger with power adapter, rugged carrying case with instructions.

x 10-4M, 440 To 4.4 ppm, 0 To 40°C, 1 m Cable

HA-4107

Chloride ISE Electrode, 1M To 5 x 10-5M, 35000 To 1.8 ppm, 0 to 80°C, 1 m Cable

HA-4108

Cupric ISE Electrode, 0.1M To 1 x 10-6M, 6354 To 0.06 ppm, 0 To 80°C, 1 m Cable

HA-4109

Cyanide ISE Electrode, 10-2 M To 1 x 10-6M, 260 To 0.02 ppm, 0 To 80°C, 1 m Cable

HA-4110

Fluoride ISE Electrode, 1M To 1 x 10-6M, Sat To 0.02 ppm, 0 to 80°C, 1 m Cable

HA-4111

Iodide ISE Electrode, 1M To 1 x 10-7M, 127000 To 0.01 ppm, 0 To 80°C, 1 m Cable

HA-4112

Lead/Sulfate ISE Electrode, 0.1M To 1 x 10-6M, 20700 To 0.21 ppm, 0 To 40°C, 1 m Cable

HA-4113

Nitrate ISE Electrode, 1M To 1 x 10-5M, 6200 To 0.62 ppm, 0 To 40°C, 1 m Cable

HA-4114

Potassium ISE Electrode, 1M To 1 x 10-6M , 39100 To 0.039 ppm, 0 To 40°C, 1 m Cable

HA-4115

Silver/Sulfide ISE Electrode, Silver: 1.0M To 1 x 10-6M, 107900 To 0.11 ppm, 0 To 40°C, 1 m Cable

Sulfide: 1.0M To 1 x 10-7M, 32100 To 0.003 ppm, 0 To 80°C, 1 m Cable

Specifications HA-98185

pH / Resolution

to 20.0 (0.1); -2.00 to 20.00 (0.01);

to 20.000 (0.001) pH, ± 0.01; ± 0.002 pH accuracy mV / Resolution Range ± 2000 mV (0.1 mV), ± 0.2 mV accuracy ISE Range From 1.00 x 10-7 to 9.99 x 1010 concentration (choice of units)

to 120.0 °C

Monitors up to 14 Different Water Quality Parameters! GPS also available

•

pH/mV

% Saturation

mg/L

Atmospheric Pressure

Salinity

HA-9828-25

Multiparameter Water Quality Meter

Features

•Displays up to 12 parameters

•Graphic LCD with backlight

•Meter features IP67 and probe features IP68 waterproof protection

•Tag identification system simplifies test logging

•Quick calibration feature calibrates all sensors with one solution

•Log-on demand and automatic logging (up to 60,000 samples)

•Can display logged data as graphs

•USB for PC connectivity

•Rugged probe with stainless steel tip has a diameter under 2” for wells and pipes

HA-9828-01 includes HA-769828 DO/EC/Temp probe, HA-9828 quick calibration standard solution (500 ml), probe maintenance kit, 4 rechargeable c size, Ni-MH batteries, power adaptor and cable, car 12 V adaptor;

HA -7698281 USB interface cable; HA-920000

Windows compatible software and instruction manual in a rugged carrying case.

HA-9828/4-01

Multiparameter Water Quality Meter, 4 m Cable

HA-9828/10-01

Multiparameter Water Quality Meter, 10 m Cable

HA-9828/20-01

Multiparameter Water Quality Meter, 20 m Cable

HA-9828/30-01

Multiparameter Water Quality Meter, 30 m Cable

HA-9828/50-01

Multiparameter Water Quality Meter, 50 m Cable

HA-9828/70-01

Multiparameter Water Quality Meter, 70 m Cable

HA-9828/100

Multiparameter Water Quality Meter, 100 m Cable

HA-982804-1

GPS Multiparameter Water Quality Meter, 4 m Cable

HA-9828010-1

GPS Multiparameter Water Quality Meter, 10 m Cable

HA-9828020-1

GPS Multiparameter Water Quality Meter, 20 m Cable

HA-9828030-1

GPS Multiparameter Water Quality Meter, 30 m Cable

HA-9828050-1

GPS Multiparameter Water Quality Meter, 50 m Cable

HA-9828070-1

GPS Multiparameter Water Quality Meter, 70 m Cable

HA-9828090-1

500

Test Solution @ 240 mV, 500 ml Bottle HA-7022L

HA-7030L 12880 µS/cm Solution, 500 ml Bottle

HA-7031L 1413 µS/cm Solution, 500 ml Bottle

HA-7033L 84 µS/cm Solution, 500 ml Bottle

HA-7034L 80000 µS/cm Solution, 500 ml Bottle

HA-7035L 111800 µS/cm Solution, 500 ml Bottle

HA-7039L 5000 µS/cm Solution, 500 ml Bottle

HA-7032L 1382 ppm (mg/L) Solution, 500 ml Bottle

HA-7036L 12.41 ppt (g/L) Solution, 500 ml Bottle

HA-70300L Electrode Storage Solution, 500 ml Bottle

HA-7061L Electrode cleaning Solution, 500 ml Bottle

HA-76409A/P DO Membrane (5 Pieces)

With

GPS

Calibration & Maintenance Solutions

pH Solutions (Cont.)

Turbidity Solutions

HA-93102-0 AMCO-AEPA At 0 NTU, 30 ml Bottle

HA-93102-20 AMCO-AEPA At 20 NTU, 30 ml Bottle

HA-93703-0 AMCO-AEPA At 0 FTU, 30 ml Bottle

HA-93703-05 AMCO-AEPA At 500 FTU, 30 ml Bottle

HA-93703-10 AMCO-AEPA At 10 FTU, 30 ml Bottle

ORP Solutions

pH Solutions

Conductivity Solutions

HA-6033 84 µS/cm Certified, 500 ml Bottle

HA-7033L 84 µS/cm Standard, 500 ml Bottle

HA-6031 1413 µS/cm Certified, 500 ml Bottle

HA-7031L 1413 µS/cm Standard, 500 ml Bottle

HA-7039L 5000 µS/cm Standard, 500 ml Bottle

HA-7030L 12880 µS/cm Standard, 500 ml Bottle

HA-7034L 80000 µS/cm Standard, 500 ml Bottle

HA-7035L 111800 µS/cm Standard, 500 ml Bottle

HA-7031/1G 1413 µS/cm Standard, 1 Gallon Bottle

HA-7030/1G 12880 µS/cm Standard, 1 Gallon Bottle

HA-70033C 84 µS/cm Certified, 20 ml Sachet, 25/Pack

HA-70033P 84 µS/cm Standard, 20 ml Sachet, 25/Pack

HA-70031C 1413 µS/cm Standard, 20 ml Sachet, 25/Pack

HA-70031P 1413 µS/cm Standard, 20 ml Sachet, 25/Pack

HA-70039P 5000 µS/cm Standard, 20 ml Sachet, 25/Pack

HA-70030P 12880 µS/cm Standard, 20 ml Sachet, 25/Pack

Total Dissolved Solids (TDS) Solutions

Standard, 500 ml Bottle

HA-7036L 12.41 ppt (g/L) Standard, 500 ml Bottle

HA-70032C 1382 ppm (mg/L) Standard, 20 ml Sachet, 25/Pack

HA-70032P 1382 ppm (mg/L) Standard, 20 ml Sachet, 25/Pack

HA-70442P 1500 ppm (mg/L) Standard, 20 ml Sachet, 25/Pack

HA-7020L 200/275 mV, 500 ml Bottle

HA-7021L 240 mV, 500 ml Bottle

HA-7022L 470 mV, 500 ml Bottle

HA-7091L Reducing Pretreatment, 500 ml Bottle

HA-7092L Oxidizing Pretreatment, 500 ml Bottle

Dissolved Oxygen Solutions

HA-7040L Zero Oxygen, 500 ml Bottle

Electrode Storage Solutions

HA-70300L Electrode Storage, 500 ml Bottle

Electrode Cleaning Solutions for General Use

HA-7061L General Purpose, 500 ml Bottle

HA-7073L Proteins, 500 ml Bottle

HA-7074L Inorganic Substances, 500 ml Bottle

HA-7077L Oil & Fats, 500 ml Bottle

Sample Preparation Solutions

HA-7051L Soil Sample Preparation, 500 ml Bottle

Fixed Water InstrumentationQuality

Microtol OnLine Turbidimeter Specifications

The Microtol OnLine Turbidimeter is specifically designed for measuring turbidity continuously in filtered water, raw water, waste water final effluent and industrial applications.

The Optional HF OnLine software allows graphical trending, alarms and filter analysis for multiple networked turbidimeters.

The optional Auto Clean Ultrasonic cleaning system automatically cleans the optical chamber for Finished or Raw water applications.

Features

•One-piece design eliminates the need to mount more than one module per turbidimeter

•Fast response time and inexpensive calibration due to low (30 ml) sample volume

•Modular design reduces overall costs

•Removeable sample cuvettes allow for easy cleaning and calibrating

•Optics are not in contact with the sample which reduces the chance of false low readings

•Convenient reusable primary calibration standards

Light Source

White light is recommended for use in turbidimeters reporting results under US EPA (US standard) jurisdiction. Infrared light is recommended for use in turbidimeters reporting results under ISO 7027 (European standard) jurisdiction. Infrared light is also recommended for waste water final effluent and industrial applications where color is present in the sample stream.

(90 degrees) 5% of reading above 40 NTU

Accuracy 2% of reading or ± 0.02 below 40 NTU

Resolution 0.0001 Selectable

Response Time Adjustable (5 to 500 seconds) (0 - 1000 NTU)

Input Pressure 1 - 200 psi (built in regulator set at 15 psi)

Standard Outputs 4 - 20 ma Galvanic Isolated or RS-485

RS-485 Protocols Modbus, HF Simplebus, HF Online Interface

Light Source White Light - 7 year life, Infrared Light (850 nm LED) - 10 year life

User Alarms 2 High / Low Alarms

Alarm Contacts FORMC 250 V AC 2A

Display Multiline Custom Backlight LCD

Security Code Prevents unauthorized access

Built in Diagnostics Yes

Storage Temperature -4°F to 140°F (-20°C to 60°C)

Operating Temperature 32°F to 122°F (0°C to 50°C)

Wetted Surfaces Nylon, Borosilicate Glass, Silicon, Polypropylene, Stainless Steel

Enclosure Designed to meet NEMA 4X, IP66

Outdoor Installation 32°F to 122°F (0°C to 50°C)

Certifications USEPA, ISO 7027, CE Approved, ETL Listed to UL 3111-1 & ETL Certified to CSA 22.2 No. 1010-1-92

Dimensions 14" x 12" x 12" (35 x 30 x 30 cm)

Shipping Weight 5.5 lbs (2.5 kg)

HF-20053

Model: #2 White Light, Range In NTU: 0 - 1000, USEPA Method 180.1

HF-20054 Model: #2 Infrared, Range In NTU: 0 - 1000, ISO 7027

HF-20055

Model: #3 White Light, Range In NTU: 0 - 100, Ultrasonic Autoclean, USEPA Method 180.1

HF-20056

Model: #3 Infrared, Range In NTU: 0 - 100, Ultrasonic Autoclean, ISO 7027

HF-20063 Model: #4 White Light, Range In NTU: 0 - 1000, Ultrasonic Autoclean, USEPA Method 180.1

HF-20064

Model: #4 Infrared, Range In NTU: 0 - 1000, Ultrasonic Autoclean, ISO 7027

Accessories

HF-19783 OnLine Windows Software For Data Collection & Reporting

HF-19609

Remote Display For An Additional Digital Readout

HF-29953

Primary Calibration Kit, .02 & 10 & 100 NTU

HF-29957

Primary Calibration Kit, Full Range, .02, 10 & 1000 NTU

HF-21555R Desiccant Refill

HF-20779S

Power Cord - 120 V AC / 240 V AC

HA-504 Advanced pH / ORP Controller

A simple-to-operate 34-level program menu offers standard features such as password protection, control relay enabling/disabling, high/low set point and adjustable hysteresis for custom control. The pH 500 series controllers have a 4 - 20 mA output with a zoom function to allow better resolution on any two points between 0 and 14 pH. The fullyprogrammable microprocessor comes complete with a 3 month back-up power supply to maintain all set points and parameters during power interruptions. Easy 1 or 2 point calibration using pH buffers 4.01, 7.01 or 10.01 ensure accuracy or reliability. An additional standard feature of the HA-504 is a differential circuit which eliminates ground loops from the process being monitored and significantly extends the life of the electrode.

Each model is supplied complete with mounting brackets and instructions.

-2.00 to 16.00 pH; -2000 to 2000 mV; -30 to 130.0°C

0.01 pH; 1 mV; 0.1°C (above -10 °C); 1°C (below -10°C) ±0.02 pH; ±2 mV; ±0.5°C (-9.9 to 130.0°C); ±1°C (-30 to -10°C)

1012 Ohm

isolated output; contact closed upon Hold mode

1 or 2 independent outputs (configuring as 0-20 mA or 4-20 mA)

electromechanical relay SPDT contact output; 5A - 250 Vac, 5A - 30 Vdc (resistive load) fuse protected: 5A, 250V “Quick Blow” fuse automatic or manual, -30 to 130°C Pt100/Pt1000 sensor (with automatic recognition and damage test)

24 Vdc/ac, 115 Vac ±10%, 230 Vac ±10%, 100 Vac ±10%; 50/60 Hz

0 to 50°C (32 to 122°F); RH max 85% non-condensing IP54 (front panel)

panel cutout:140 x 140 mm, instrument: 144 x 144 x 170 mm / 1.6 kg (3.5 lb.)

ERE offers a wide range of Calibration Solutions

Choose the RIGHT ONE for YOU!

HA-710 Advanced Conductivity & TDS Controller

The HA-710 conductivity and TDS controller offers state-of-the-art technology for your process control. The HA-710 can be configured for ON/OFF, Proportional, PI or PID control. Thanks to Hanna’s exclusive technology, they can be customized to best fit your application. A menudriven display aids the user throughout the operations with running messages and clear prompts. All relevant parameters can be simply adjusted and will remain memorized until overwritten. Bright LED lights show the current status even from a distance. With self-diagnostic features and extractable terminals, installation and maintenance are rapid and simple. Password protection guarantees that the calibration and predetermined parameters cannot be altered unnecessarily. The controllers can operate with 4-ring probe or 4 - 20 mA signal. They accept probes with or without a built-in Pt100 temperature sensor. HA-710 monitors and controls both conductivity and TDS. If you only need conductivity or TDS, then order HA-700 or HA-705, respectively.

Hanna pHep®4 & pHep®5

These testers use the exclusive replaceable pull-out cartridge pH electrode. Its exposed temperature sensor provides fast response time and its proximity to the pH electrode guarantees much more accurate temperature compensated readings.

pHep®4, pHep®5 includes protective cap, electrode removal tool, 4 x 1.5 V batteries and instructions.

Hanna ORP Tester

This new micro-processor based tester provides the most advanced solution in ORP and Temperature measurement. Further, the HA-98121 provides pH measurement.

Features

• Replenishable junction

• Dual level LCD

• Battery life percentage indication

• Stability indicator

• Floating and waterproof body

HA-98120 & HA-98121 includes protective cap, electrode removal tool, 4 x 1.5 V batteries and instructions.

SpecificationspHep®4

Range -2.0 to 16.0 pH-2.00 to 16.00 pH

Accuracy ± 0.1 pH± 0.05 pH

Calibration Automatic, at 1 or 2 points with 2 sets of memorized buffer values

Temp Compensation Automatic Dimensions 6.4" x 1.6" x 1.0", 3.5 oz

Hanna Dist® 5 & Dist® 6 EC/Temp/TDS Testers

Unmatched 3-in-1 tester measuring Electrical Conductivity, Temperature and Total Dissolved Solids in one small compact unit.

Features

• Floating waterproof casing

• Dual level LCD displays

• Replaceable graphite probe

Dist® 5 & Dist® 6 includes protective cap, electrode removal tool, 4 x 1.5 V batteries and instructions.

HA-98127 pHep® 4

HA-98128

pHep® 5

HA-98120

ORP/Temperature Tester

HA-98121 ORP/pH/Temperature Tester

HA-98311

Dist® 5

HA-98312

Dist® 6

HA-98129

Combo pH/EC/Temp/TDS Tester

HA-98130

Combo pH/EC/Temp/TDS Tester

HA-7061L

Electrode Cleaning Solution, 500 ml Bottle

HA-70300L

Electrode Storage Solution, 500 ml Bottle

6.4" x 1.6" x 1.0", 3.5 oz

Hanna Combo pH/EC/Temp/TDS Testers in One Unit!

Unmatched 4-in-1 tester measuring pH, Electrical Conductivity, Temperature and Total Dissolved Solids in one small compact unit.

• Floating waterproof casing

• Dual level LCD displays

• Replaceable pH probe

HA-98129 & HA-98130 includes protective cap, electrode removal tool, 4 x 1.5 V batteries and instructions.

1 point Calibration (pH) Automatic, at 1 or 2 points with 2 sets of memorized buffers

EC/TDS: automatic, with ß adjustable from 0.0 to 2.4%/°C

Dimensions 6.4" x 1.6" x 1.0", 3.5 oz

HA-7004L pH 4.01 Buffer Solution, 500 ml Bottle

HA-7007L pH 7.01 Buffer Solution, 500 ml Bottle

HA-7010L pH 10.01 Buffer Solution, 500 ml Bottle

HA-7031L 1413 µS/cm Conductivity Calibration Solution, 500 ml Bottle

HA-7032L 1382 ppm TDS Calibration Solution, 500 ml Bottle

HA-7021L 240 mV Test Solution, 500 ml Bottle

HA-7091L Reducing Solution, 500 ml Bottle

HA-7092L Oxidizing Solution, 500 ml Bottle

Specifications

HA-4522

Research Grade Combination Meters

Features

•240 x 320 Dot Matrix Color Display

•Logging and graphing capabilities

•USB and RS232 for computer compatibility

•Auto recognition of probe type (2 or 4 ring, and nominal cell con stant)

•Stages 1, 2 and 3 USP mode

•3 salinity scales: Practical Salinity, Natural Sea Water, Percent

•Linear and natural water temperature compensation

•Exclusive HANNA Calibration Check™

HA-4522-01 & HA-4521-01

Are Supplied W/ 4-Ring EC Probe, Glass Body pH Electrode, Temperature Probe, Power Adapter, pH 4 & pH 7 Buffer Solutions, Electrode Refilling Solution, Electrode Holder & Instructions (115 V)

HA-4222-01 & HA-4221-01

Are Supplied W/ Glass Body pH Electrode, Temperature Probe, Power Adapter, pH 4 & pH 7 Buffer Solutions, Electrode Refilling Solution, Electrode Holder & Instructions (115 V) (230 V Also Available)

HA-4222

Laboratory pH Meters with Backlit, Graphic LCD

HA-3220

•

HA-3221

•

HA-3222

Features

•Single (HA-3220 & HA-3221) or dual (HA-3222) input channels

•Backlit, graphic LCD

•Exclusive Calibration Check™, electrode diagnostics

•Prompts and messages on the graphic LCD

•Stability, interval and log-on-demand logging

•5 point calibration with 7 standard and 5 custom buffers

•Relative mV measurements

HA-3222

Specifications

Range

pH

HA-3220

HA-3221

-2.0 to 20.0; -2.00 to 20.00; -2.000 to 20.000 pH

mV ± 2000 mV

ISE N/A From 1.00 x 10-3 to 1.00 x 105 ppmFrom 1.00 x 10-7 to 9.99 x 1010 concentration (choice of units)

Temperature -20.0 to 120.0°C (-4.0 to 248.0°F)

Resolution pH 0.1; 0.01; 0.001 pH

mV 0.1 mV

ISE N/A 3 digits 0.01; 0.1; 1; 10 concentration

Temperature 0.1°C (0.1°F)

Accuracy

pH ± 0.01; ± 0.002 pH

mV ± 0.2 mV

ISE N/A± 0.5% of reading (monovalent ions), ± 1% of reading (divalent ions)

Temperature ± 0.2°C (± 0.4°F) (excluding probe error)

Calibration

pH Up to 5 point calibration, 7 standard buffers available (1.68, 4.01, 6.86, 7.01, 9.18, 10.01, 12.45) + 5 Custom Buffers

ISE N/A Up to 2 point calibration,Up to 5 point calibration, 6 Standard 6 standard solutions solutions (in units selected) (0.1, 1, 10, 100, 1000, 10000 ppm)

Slope From 80 to 110%

Temperature Compensation (pH)Manual or automatic from -20.0 to 120.0°C (-4.0 to 248.0°F)

Probes HA-1131B pH with BNC connector and HA-7662-T stainless steel temperature probe (included)

300 samplesLog-on-demand 400 samples

pH Meters with Large LCD HA-2210 • HA-2211

Features

• New benchtop design

• Extra wide LCD (6.25" x 1.5")

• Automatic calibration

HA-2210-01 & HA-2211-01

Are Supplied W/ HA-1131B Glass-Body Combination pH Electrode W/ 1 m (3.3') Cable, HA-7662 Temperature Probe, Electrode Holder, pH 4.01 & 7.01 Buffer Solutions (20 mL Each.), HA-7071 Electrolyte Solution, 12 V DC Power Adapter & Instruction Manual (115 V) (230 V Also Available)

HA-5004

pH 4.01 Buffer Solution, 500 ml

HA-5007

pH 7.01 Buffer Solution, 500 ml

HA-5010

pH 10.01 Buffer Solution, 500 ml

HA-54710

pH 4.01, pH 7.01 & pH 10.01 Buffer Solution, 500 ml Each

HA-70300L

Electrode Storage Solution, 500 ml

HA-50XX

Buffers Are Technical Buffers W/ ± .01 Accuracy & Are Provided With Certificate

HA-931001

pH/mV Electrode Simulator W/ Display

• 5 standard buffers

• Simultaneous display of pH and Temperature

• Automatic Temperature Compensation

• Extended mV range (HA-2211)

Specifications

HA-2210

•Up to 400 samples memory capacity

•Auto HOLD to freeze readings on the display

•GLP to view last calibration data for pH, Rel mV or ISE

•User selectable “Outside Calibration Range” warning

•User-selectable “Calibration Timeout” to remind when a new calibration is necesary

•PC compatible via USB

HA-3220-01, HA-3221-01 & HA-3222-01

Are All Supplied W/ HA-1131B pH Electrode W/ BNC Connector & 1 m Cable, HA-7662-T Stainless Steel Temperature Probe, pH 4 & 7 Buffer Solutions, Cleaning Solution, Electrolyte Solution, Electrode Holder, 12 V DC Power Adapter & Instructions (115 V) (230 V Also Available)

HA-740157

Plastic Refilling Pipette (20)

HA-92000CD4

Windows® Compatible Software

HA-73114 USB Cable For PC Connection

All Electrodes Part Numbers Ending In "B" Are Supplied W/ A BNC Connector & 1 m (3.3') Cable, As Shown Below

HA-1043B

Use: Strong Acid / Alkalis; Glassbody, Double Junction, Refillable, Combination pH Electrode

HA-1053B

Use: Emulsions; Glass-Body, Triple Ceramic, Refillable, Combination pH Electrode

HA-1083B

Use: Biotechnology; Glass-Body, Open Junction, Refillable, Combination pH Electrode

HA-1131B

Use: General Purpose; Glass-Body, Single Junction, Refillable, Combination pH Electrode

HA-3230B

Use: General Purpose; Plastic-Body, Gel-Filled, Combination Platinum ORP Electrode

HA-7662-T Stainless Steel Temperature Probe

HA-2210

± 0.5°C (0.0 to 100.0°C); ± 1°C (outside) (excluding probe error)

pH Calibration Automatic, 1 or 2 points with 5 automatically recognized buffers (pH 4.01, 6.86, 7.01, 9.18, 10.01)

Temperature CompensationAutomatic (with HA-7669/2W probe) or manual from -9.9 to 120°C

pH Electrode HA-1131B, glass-body, single junction, refillable, BNC connector, 1 m cable (included)

Temperature Probe HA-7662 with 1 m (3.3') cable (included)

Input Impedance 1012 Ohm Power Supply 12 V DC adapter (included)

0 to 50°C (32 to 122°F); RH max 95%

Dissolved Oxygen & BOD Meter with Graphic, Color LCD Display

BOD gives an indication of the biodegradable organic material present in a sample of water. The dissolved oxygen concentration is measured before and after an incubation period of 5 days and the BOD is calculated in mg per liter from the difference.

OUR and SOUR are used to determine the oxygen consumption or respiration rate. OUR is measured in mg of oxygen consumed per liter per hour, and SOUR is measured in mg of oxygen consumed per gram of volatile suspended solids per hour.

Specifications HA-4421

Range

Dissolved Oxygen 0.00 to 90.00 ppm; 0.0 to 600.0% saturation

Barometric Pressure450 to 850 mmHg; 560 to 1133 mBar

Salinity Compensation0 to 45 ppt (g/L)

Temperature -20.0 to 120.0°C; -4.0 to 248°F; 253.1 to 393.1K

Features

•Extended range up to 90 ppm and 600% saturation

•True barometric atmospheric pressure compensation

•Automatic or user calibration

•Auto-hold to freeze LCD readings

•AutoEnd mode for DO

•Flexible logging with 3 modes

•BOD (biochemical oxygen demand), OUR (oxygen uptake rate) and SOUR (specific oxygen uptake rate)

•GLP

•Two selectable alarm limits

•Up to 100 logging lots, 200 OUR and SOUR reports and up to 200 BOD method entries

Supplied W/ HA-76408 DO Probe, HA-7041S Electrolyte Solution (30 ml), HA-76407A/P Membrane Caps (2), HA-76404N Electrode Holder, Power Adapter & Instruction Manual (115 V)

HA-76408

DO Probe For Laboratory Use, W/ 1 m (3.3') Cable

HA-7040L

Zero Oxygen Solution, 500 ml

HA-7041S Electrolyte Solution, 30 ml

HA-76407A/P Replacement Membrane (5 Pieces)

HA-92000CD4

Windows® Compatible Software

HA-920010 Serial Cable For PC Connection

HA-73114

USB Cable For PC Connection

Precision

Resolution

Dissolved Oxygen 0.01 ppm; 0.1% saturation

Barometric Pressure1 mm Hg

Temperature 0.1°C/°F/K

Accuracy

Dissolved Oxygen ± 1.5% of reading ± 1 digit

Barometric Pressure± 3 mm Hg + 1 least significant digit

Temperature ± 0.2°C/K/°F

Measurement ModesDirect DO; BOD (biochemical oxygen demand); OUR (oxygen uptake rate); SOUR (specific oxygen uptake rate)

Calibration

Dissolved Oxygen Automatic/user standard, 1 or 2 points

Barometric PressureSingle point

Temperature Compensation0.0 to 50.0°C; 32.0 to 122.0°F; 237.1 to 323.1 K

Probe (Included) Polarographic with built-in temperature sensor

Logging

Record Samples Up to 100 lots; 10000 samples/lot for automatic logging; 5000 samples/lot for manual logging

Logging Interval from 1 second and up

GLP Last calibration data, calibration info

Alarm (DO, BOD, OUR, SOUR) Inside and outside limits

PC Connection Opto-isolated USB and RS232

Display 240 x 320 dot-matrix color LCD with on-screen help, graphing, language selection and custom configuration

Power Supply 12 V DC adapter (included)

& Free/Total Chlorine

HA-88703

0.1, 1 EBC

Range Selection Automatic Accuracy ± 2% of reading plus 0.02 NTU (0.15 Nephelos; 0.01 EBC) ± 5% of reading above 1000 NTU (6700 Nephelos; 245 EBC)

Features

•HA-83414 features 4 measuring ranges: Ratio Turbidity; Non-Ratio Turbidity; Free Chlorine; Total Chlorine

•HA-88703 features 2 measuring ranges: Ratio Turbidity; Non-Ratio Turbidity

•Meets USEPA requirements

•Exclusive chlorine CAL CHECK™ calibration validation for HA-83414

•Good laboratory practice capabilities

•2, 3, 4 or 5 point turbidity calibration

•USB PC connectivity

•Backlit LCD

•On-screen tutorial modes

•Log and recall up to 200 measurements

•Contextual help menus

Repeatability ± 1% of reading or 0.02 NTU (0.15 Nephelos; 0.01 EBC) whichever is greater

Stray Light < 0.02 NTU (0.15 Nephelos; 0.01 EBC)

Light Detector Silicon Photocell Method Nephelometric method (90°) or Ratio Nephelometric Method (90° & 180°), Adaptation of the USEPA Method 108.1 and Standard Method 2130 B. Measuring Mode Normal, Average, Continuous

Turbidity Standards <0.1, 15, 100, 750 and 2000 NTU

Calibration Two, three, four or five-point calibration

Free & Total Chlorine

Range Free: Cl2: 0.00 to 5.00 mg/L / Total: Cl2: 0.00 to 5.00 mg/L

Resolution 0.01 mg/L from 0.00 to 3.50 mg/L; 0.10 above 3.50 mg/L

Accuracy ± 0.02 mg/L @ 1.00 mg/L

Detector Silicon photocell with 525 nm narrow band interference filters

Method Adaptation of the USEPA Method 330.5 and Standard Method 4500-Cl G.

Standards 1 mg/L free chlorine, 1 mg/L total chlorine

Calibration One-point calibration

HA-88703-01 supplied with (5) sample cuvets and caps, calibration cuvets, silicone oil (HA-93703-58), tissue for wiping cuvets, power cord and instruction manual.

HA-83414-01 supplied with (5) sample cuvets and caps, calibration cuvets for turbidimeter and colorimeter (HA-83414-11), silicone oil (HA-93703-58), tissue for wiping cuvets, scissors, power cord and instruction manual

HA-4421-01

HA-83200, 2008 Series

Easy Lab Analysis

2008 Series is a multiparameter bench colorimeter dedicated for laboratory analysis. It can measure up to 45 methods using specific liquid or powder reagents. The amount of reagent is precisely dosed to ensure maximum repeatability.

Features

• Log and recall data at a push of a button

• Light blocking cuvet holder

• Backlit LCD

• Battery Error Prevention System (BEPS)

• PC compatible via USB

• On-screen tutorial and context sensitive help screens

• Powered by rechargeable batteries or 12 VDC

HA-83200-01

2008 Series Supplied W/ A Rugged Carrying Case, Cuvettes (4), Bottle For DO Tests, Scissors, Cuvette Cleaning Cloths (4), 12 V DC Adapter, & An Instruction Manual (115 V) (Test, Range & Method)

HA-93712-01

Aluminum, 0.00 To 1.00 mg/L, Aluminon

HA-93755-01

Alkalinity, 0 To 500 mg/L, Colorimetric

HA-93715-01

Ammonia, MR 0.00 To 10.00 mg/L, Nessler

HA-93700-01

Ammonia, LR 0.00 To 3.00 mg/L, Nessler

HA-93716-01

Bromine, 0.00 To 8.00 mg/L, DPD

HA-937521-01**

Calcium, 0 To 400 mg/L, Oxalate

HA-93738-01

Chlorine Dioxide, 0.00 To 2.00 mg/L, Chlorophenol Red

HA-93701-01

Chlorine*, Free 0.00 To 2.50 mg/L DPD

HA-93711-01

Chlorine*, Total 0.00 To 3.50 mg/L, DPD

HA-93723-01

Chromium, VI HR 0 To 1000 μg/L, Diphenylcarbohydrazide

HA-93749-01

Chromium, VI LR 0 To 300 μg/L, Diphenylcarbohydrazide

N/A

Color, 0 To 500 PCU, Colorimetric Platinum Cobalt

HA-93702-01

Copper, HR 0.00 To 5.00 mg/L, Bicinchoninate

HA-95747-01

Copper, LR 0 To 1000 μg/L, Bicinchoninate

HA-93714-01

Cyanide, 0.000 To 0.200 mg/L, Pyridine-Pyrazalone

HA-93722-01

Cyanuric Acid, 0 To 80 mg/L, Turbidimetric

HA-93729-01

Fluoride, 0.00 To 2.00 mg/L, SPADNS

HA-93720-01

Hardness (Calcium), 0.00 To 2.70 mg/L, Colorimetric

HA-93719-01

Hardness (Magnesium), 0.00 To 2.00 mg/L, Colorimetric

HA-93704-01

Hydrazine, 0 To 400 μg/L, p-Dimethylaminobenzaldehyde

HA-93718-01

Iodine, 0.0 To 12.5 mg/L, DPD

HA-93721-01

Iron HR, 0.00 To 5.00 mg/L, Phenantroline

HA-93746-01**

Iron LR, 0 To 400 μg/L, TPTZ

HA-937520-01**

Magnesium, 0 To 150 mg/L, Calmagite

HA-93709-01

Manganese, HR 0.0 To 20.0 mg/L, Periodate Oxidation

HA-93748-01**

Manganese LR, 0 To 300 μg/L, PAN

HA-93730-01

Molybdenum, 0.0 To 40.0 mg/L, Mercaptoacetic Acid

HA-93726-01

Nickel HR, 0.00 To 7.00 g/L, Photometric

HA-93740-01**

Nickel LR, 0.000 mg/L To 1.000 mg/L, PAN

HA-93728-01

Nitrate, 0.0 To 30.0 mg/L, Cadmium Reduction

HA-93708-01

Nitrite HR, 0 To 150 mg/L, Ferrous Sulfate

HA-93707-01

Nitrite LR, 0.00 To 0.35 mg/L, Diazotization

HA-93732-01

Oxygen, Dissolved (DO), 0.0 To 10.0 mg/L, Winkler

HA-93757-01

Ozone, 0.00 To 2.00 mg/L, DPD

HA-93710-01

pH, 6.5 To 8.5 pH, Phenol Red

HA-93717-01

Phosphate HR, 0.0 To 30.0 mg/L, Amino Acid

HA-93713-01

Phosphate LR, 0.00 To 2.50 mg/L, Ascorbic Acid

HA-93706-01

Phosphorus, 0.0 To 15.0 mg/L, Amino Acid

HA-93750-01

Potassium HR, 20 To 200 mg/L, Turbidimetric Tetraphenylborate

HA-93750-01

Potassium MR, 10 To 100 mg/L, Turbidimetric Tetraphenylborate

HA-93750-01

Potassium LR, 0.0 To 20.0 mg/L, Turbidimetric Tetraphenylborate

HA-93705-01

Silica, 0.00 To 2.00 mg/L, Heteropoly Blue

HA-93737-01**

Silver, 0.000 To 1.000 mg/L, PAN

HA-93751-01

Sulfate, 0 To 150 mg/L, Turbidimetric

HA-93731-01

Zinc, 0.00 To 3.00 mg/L, Zincon

All reagents with -01 final code are for 100 tests unless noted otherwise.

* For chlorine, liquid reagents are available

** Reagents for 50 tests

HA-83224 Multiparameter Photometer

With Bar Code Recognition of Sample Vials

Features

• Measures Ammonia, Chlorine, COD, Nitrate, Nitrogen and Phosphorus

• Bar code reader detects the method and range automatically

• Three operation modes: Automatic, Semi-Automatic and Manual

• Bar coded pre-dosed reagent vials

• On-screen step-by-step tutorial

• Logs up to 200 samples

• Context sensitive help screen at a touch of a button

• Selection of languages

• USB connection

• Graphic LCD

Specifications HA-83224

Light Source Tungsten lamps with narrow-band interference filters

Light Detector Silicon photocells

Data Logging Up to 200 samples

Power Supply 230 V AC or 115 V AC power adapter

Dimensions / Weight 235 x 212 x 143 mm (9.2" x 8.34" x 5.62"), 2.3 kg (5.1 lbs)

COD Test Tube Heater

Features

• The HA-839800 thermo-reactor is constructed of durable materials with a vial capacity to perform up to 25 digestions simultaneously.

• The reactor is equipped with a user-selectable temperature setting to allow COD and total phosphorus reactions at 150°C and also 105°C for total nitrogen analysis.

• To ensure the highest accuracy of digestion, a timer up to 120 minutes is incorporated.

• An audible alarm indicates when the incubating period is completed. HA-839800

A Complete Lab for Wastewater Analysis

HA-83224-01 Supplied W/ Sample Vials (10), Vial Cleaning Cloths (4), Scissors & Instruction Manual. (115 V)

HA-94764A-25 Ammonia LR Range: 0.00 To 3.00 mg/L Method: Nessler, 25 Tests

HA-94764B-25 Ammonia HR Range: 0 To 100 mg/L Method: Nessler, 25 Tests

HA-93701-01 Chlorine, Free Range: 0.00 To 5.00 mg/L Method: DPD, 100 Tests

HA-93711-01 Chlorine, Total Range: 0.00 To 5.00 mg/L Method: DPD, 100 Tests

HA-94754A-25 Chemical Oxygen Demand LR Range: 0 To 150 mg/L (As COD) Method: Dichromate, Mercuric Sulfate, 25 Tests

HA-94754B-25 Chemical Oxygen Demand MR Range: 0 To 1500 mg/L (As COD) Method: Dichromate, Mercuric Sulfate, 25 Tests

HA-94754C-25 Chemical Oxygen Demand HR Range: 0 To 15000 mg/L (As COD) Method: Dichromate, Mercuric Sulfate, 25 Tests

HA-94766-50 Nitrate Range: 0.0 To 30.0 mg/L (As NO3-N) Method: Chromotropic Acid, 50 Tests

HA-94767A-50 Nitrogen, Total LR Range: 0.0 To 25.0 mg/L (As N) Method: Chromotropic Acid, 50 Tests

HA-94767B-50 Nitrogen, Total HR Range: 10 To 150 mg/L (As N) Method: Chromotropic Acid, 50 Tests

HA-94758B-50 Phosphorus, Acid Hydrolyzable Range: 0.00 To 1.60 mg/L (As P) Method: Ascorbic Acid, 50 Tests

HA-94758A-50 Phosphorus, Reactive Range: 0.00 To 1.60 mg/L (As P) Method: Ascorbic Acid, 50 Tests

HA-94763A-50 Phosphorus, Reactive HR Range: 0.0 To

Accuracy & Safety!

For Reactor (°C)

HA-151-01 Electronic Thermometer For Reactor (°F)

Klett™ Colorimeters

Use for colorimetric and turbidimetric determinations including: color, concentration, haze and density measurements and microbiology growth curves.

These photometric colorimeters use specific light filters to give readings on a unique KlettTM scale. The readings are directly proportional to the concentration or optical density of a solution, in accordance with Beers Law. Two matched photocells and a suspension galvanometer give the instrument a broad range of measurement making it light and ambient temperature independent. A fully compensated and carefully balanced electrical circuit provides accuracy and consistency in readings while using simple and rugged equipment. The precision galvanometer has an illuminated logarithmic scale, graduated from 1 to 1000 KlettTM and the scale is graduated in units proportional to the optical density. Repeatability is ± .33% of the full scale. Two units are available. The Industrial Model accepts rectangular solution cells, which can be used in either of two directions. Measurements can then be taken at depths of 10 mm, 20 mm, or 40 mm. A reduction plate is available to minimize solution depth to 2.5 mm. An adapter is available which permits the use of test tubes. The Clinical Model uses standard 14.25 x 125 mm test tubes. Calibrated or uncalibrated tubes are available. In addition, micro test tubes can be used for samples as small as 2.5 ml. Both models are supplied with the two most commonly used filters, blue for 400-450 nm and green for 520-580 nm. Additional filters are available to permit measurements over the complete visual range. Each unit has detailed instructions, standards and guides for a wide range of tests. BEL-T37012-0000

Durable Construction for Long Service Life

Filters For Both Clinical & Industrial Models

BEL-T37014-0040

KS-40 Color Filter, Range: 380-430

BEL-T37014-0042

KS-42 Color Filter, Blue Range: 400-450

BEL-T37014-0044

KS-44 Color Filter, Range: 410-480

BEL-T37013-0001

Model 900-3, 220 V AC Industrial Model

For Klett™ Colorimeter, Clinical Model BEL-T37012-0000

BEL-T37012-0010

KlettTM 801 Test Tubes, Uncalibrated 12/Pack

BEL-T37012-0020

KlettTM 802 Test Tubes, Calibrated 12/Pack

BEL-T37012-1020

KlettTM Test Kit, Calibrated, Each Includes Three Test Tubes # 0,1, & 2, Test

Filter & Instructions

For Klett™ Colorimeter, Industrial Model BEL-T37013-0000

BEL-T37013-0010

KlettTM 901 Solution Cell, 20/40 mm

BEL-T37013-0015

KlettTM Fused Solution Cell, 20/40 mm

BEL-T37013-0020

KlettTM 902 Solution Cell, 10 mm

BEL-T37013-0030

KlettTM 903 Reduction Plate

BEL-T37013-0041

KlettTM 904M Special Test Tube Adaptor

BEL-T37013-1015

KlettTM Test Kit, Industrial, Each Includes Three Test Tubes # 0,1, & 2, Test Filter, Test Tube Adapter & Instructions

BEL-T37014-0047

KS-47 Color Filter, Range: 445-505 *

BEL-T37014-0050

KS-50 Color Filter, Range: 470-530 *

BEL-T37014-0052

KS-52 Color Filter, Range: 485-550 *

BEL-T37014-0054

KS-54 Color Filter, Green Range: 520-580

BEL-T37014-0055

KS-55 Color Filter, Range: 520-600 *

BEL-T37014-0056

KS-56 Color Filter, Range: 540-590

BEL-T37014-0059

KS-59 Color Filter, Range: 565-630

BEL-T37014-0060

KS-60 Color Filter, Range: 580-640 *

BEL-T37014-0062

KS-62 Color Filter, Range: 590-660 *

BEL-T37014-0064

KS-64 Color Filter, Range: 620-680 *

BEL-T37014-0066

KS-66 Color Filter, Red Range: 640-700

BEL-T37014-0069

KS-69 Color Filter, Range: 660-740

BEL-T37014-0070

KS-6225T Color Filter, Range: 590-660 *

*Special Order

pH & ORP Electrodes Designed & Manufactured by HANNA

Includes electrode with 1 m (3.3') coaxial cable with BNC connection (some models are available with a screw cap or BNC + PIN connection)

HA-1043BHA-1053BHA-1131BHA-1144BHA-1230BHA-3131BHA-FC200HA-FC210HA-1332BHA-3230B

Ion Selective Electrodes

HANNA’s Ion Selective Electrodes can be grouped into three general categories based upon construction:

• Solid state electrodes

• Liquid membrane electrodes

• Gas sensors

Includes BNC Connection, 12 mm O.D., 120 mm length & 1 m coxial cable

pH Technical Calibration Solutions

Features

•(± 0.01 pH) for each point of the pH scale

•pH Value @ 25°C

•Available in sachets, liters and gallons upon request

pH Millesimal Calibration Solutions with ± 0.002 pH Accuracy

Features

•HA-60XX has been prepared to meet the increasing need for assured accuracy in pH measurements. Each bottle of the series HA-60XX is provided with a certificate of analysis, prepared by comparison with NIST standards.

ISE Standards

ISE Standards are required for direct and incremental measurement techniques and are available with a Certificate of Analysis.

500 ml

HA-4010-01 0.1 M Fluoride Std., 500 ml

HA-4010-02

100 ppm Fluoride Std., 500 ml

HA-4010-03

1000 ppm Fluoride Std., 500 ml

HA-4010-10

10 ppm Fluoride Std. Premixed W/ TISAB II, 500 ml

HA-4010-11

1 ppm Fluoride Std. Premixed W/ TISAB II, 500 ml

HA-4010-12

2 ppm Fluoride Std. Premixed W/ TISAB II, 500 ml

HA-4010-30

(4) 1, (4) 10 ppm Fluoride Std. W/ (4) TISAB II, 500 ml

Other ISE solutions available upon request.

•pH Value @ 25°C

•Also available in 1 Liter bottles add -01 to the end of the part number

HA-6007 7.010 pH, 500 ml

HA-6074 7.413 pH, 500 ml

HA-008 8.000 pH, 500 ml

HA-6009 9.000 pH, 500 ml

HA-6091

9.177 pH, 500 ml

HA-6010

4.010 pH, 500 ml

HA-6046 4.630 pH, 500 ml

HA-6005 5.000 pH, 500 ml

HA-6006 6.000 pH, 500 ml

HA-6068 6.862 pH, 500 ml

10.010 pH, 500 ml

HA-6011

11.000 pH, 500 ml

HA-6012

12.000 pH, 500 ml

HA-6124

12.450 pH, 500 ml

HA-6013

13.000 pH, 500 ml

pH, Conductivity, TDS, ORP, Turbidity, Storage, Cleaning & Sample Preperation Solutions

Features

• Excellent quality

• Complete range of solutions and sizes

• Certificates of analysis available upon request

• FDA approved bottles available upon request

• Temperature reference chart on each solution

Numerous Solutions to Choose From ... Which One is Best for You?

pH 4.01 Buffer Solutions

HA-70004P 4.01, 20 ml Sachet, 25/Box

HA-7004L 4.01, 500 ml

HA-7004/1L 4.01, 1 Liter

HA-7004/1G 4.01, 1 US Gallon

pH 7.01 Buffer Solutions

HA-70007P 7.01, 20 ml Sachet, 25/Box

HA-7007L 7.01, 500 ml

HA-7007/1L

7.01, 1 Liter

HA-7007/1G 7.01, 1 US Gallon

pH 10.01 Buffer Solutions

HA-70010P 10.01, 20 ml Sachet, 25/Box

HA-7010L 10.01, 500 ml

HA-7010/1L 10.01, 1 Liter

HA-7010/1G 10.01, 1 US Gallon

ORP Test & Pretreatment Solutions

HA-7020L

ORP Test Solution At 200/275 mV (@ 20°C), 500 ml

HA-7021L

ORP Test Solution At 240 mV (@ 20°C), 500 ml

HA-7022L

ORP Test Solution At 470 mV (@ 20°C), 500 ml

HA-7091L

Reducing Pretreatment Solution, 500 ml

HA-7092L

Oxidizing Pretreatment Solution, 500 ml

Conductivity Standards

HA-70033P

84 S/cm (µmho/cm), 20 ml Sachet, 25/Box

HA-7033L

84 S/cm (µmho/cm), 460 ml

HA-70031P

1413 µS/cm (µmho/cm), 20 ml Sachet, 25/Box

Continuation Of Conductivity Standards

HA-7031L

1413 µS/cm (µmho/cm), 460 ml

HA-70030P

12880 µS/cm (µmho/cm), 20 ml Sachet 25/Box

HA-7030L 12880 µS/cm (µmho/cm), 460 ml

TDS Standards

HA-70080P 800 ppm (mg/L), 20 ml Sachet, 25/Box

HA-70032P 1382 ppm (mg/L), 20 ml Sachet, 25/Box

HA-7032L 1382 ppm (mg/L), 460 ml

HA-70442P 1500 ppm (mg/L), 20 ml Sachet, 25/Box

HA-70442L 1500 ppm (mg/L), 460 ml

HA-70038P 6.44 ppt (g/L), 20 ml Sachet, 25/Box

Turbidity Standard Solutions

HA-93102-0

AMCO-AEPA-1 Calibration Solution At 0 NTU, 30 ml

HA-93102-20

AMCO-AEPA-1 Calibration Solution At 20 NTU, 30 ml

HA-93703-0

AMCO-AEPA-1 Calibration Solution At 0 FTU, 30 ml

HA-93703-05

AMCO-AEPA-1 Calibration Solution At 500 FTU, 30 ml

HA-93703-10 AMCO-AEPA-1 Calibration Solution At 10 FTU, 30 ml

Electrode Storage Solutions

HA-70300L Electrode Storage Solution, 500 ml

HA-80300L Electrode Storage Solution, FDA, 500 ml

Sample Preparation Solutions

HA-7051M

Soil Sample Preparation Solution, 250 ml

HA-7051L

Soil Sample Preparation Solution, 500 ml

HA-70960 Preparation Solution for Solid Or Semi Solid Samples, 30 ml

Cleaning Solutions For General Use

HA-7061L General Purpose, 500 ml

HA-7073L Proteins, 500 ml

HA-7074L Inorganic Substances, 500 ml

HA-7077L Oil & Fats, 500 ml

HA-8061L General Purpose, FDA, 500 ml

HA-8073L Proteins, FDA, 500 ml

HA-8077L Oil & Fats, FDA, 500 ml

Specific Application Cleaning Solutions

HA-70620L Cleaning & Disinfection Solution For Skin Residuals (Cosmetic Industry), 500 ml

HA-70621L Cleaning Solution For Skin Grease & Sebum (Cosmetic Industry), 500 ml

HA-70630L Acid Cleaning Solution For Meat Grease & Fats (Food Industry), 500 ml

HA-70631L Alkaline Cleaning Solution For Meat Grease & Fats (Food Industry), 500 ml

HA-70640L Cleaning Solution For Milk Deposits (Food Industry), 500 ml

HA-70641L Cleaning & Disinfection Solution For Dairy Products (Food Industry), 500 ml

HA-70642L Cleaning Solution For Cheese Deposits (Food Industry), 500 ml

HA-70663L Cleaning Solution For Soil Deposits (Agriculture), 500 ml

HA-70664L Cleaning Solution For Humus Deposits (Agriculture), 500 ml

HA-70670L Cleaning Solution For Salt Deposits (Industrial Processes), 500 ml

HA-70671L Cleaning & Disinfection Solution For Algae, Fungi & Bacteria (Industrial Processes), 500 ml

HA-70680L Cleaning Solution For Cellulose Deposits, 500 ml

HA-70681L Cleaning Solution For Ink Stains, 500 ml

Specifications

HA-180

Maximum Stirring Capacity 1 Liter

Speed Range Min. 100 rpm

Speed Range Max. 1000 rpm

Power Supply 110/115 V AC or 230/240 V AC, 50/60 Hz

Cover Material ABS plastic

Environment 0 to 50°C (32 to 122°F) RH max 95%

Dimensions 137 mm (Dia.) x 51 mm (H)

Weight 640 g (1.4 lbs)

Magnetic Mini-Stirrers

HA-190M-1 and HA-190M-0 come supplied with an ABS cover that will resist the harmful effects of chemicals that are accidentally spilled.

HA-200M is supplied with an AISI 316 stainless steel cover. This model is ideal for applications that create exothermic reactions.

Specifications

HA-190M-1

HA-190M-0

Max. Stirring Capacity 1 Liter (0.26 Gal)

Speed Range Min. 100 rpm

Speed Range Max. 1000 rpm

Distinctive, Compact Magnetic Mini-Stirrers

HA-180

The HA-180 series is compact, lightweight, low-cost and designed in a special round shape without any sharp corners. Lack of laboratory bench space is no longer a concern. These stirrers incorporate electronic controls that allow the user to regulate the speed with greater precision. In addition to speed control, a Speedsafe mechanism will assure that the maximum speed will never be exceeded. Often, in the lab, a sample is removed from the stirrer before reducing the speed. This would cause the motor to accelerate until it is destroyed. Available in nine colors, light yellow, light sea-green, light blue, yellow, green, dark blue, red, grey and ivory, several HA-180 stirrers can be placed on a laboratory bench with their colors helping to identify the different samples.

HA-180A-1 Light Yellow Mini-Stirrer, 110/115 V AC

HA-180B-1 Light Sea-Green Mini-Stirrer, 110/115 V AC

HA-180C-1 Light Blue Mini-Stirrer, 110/115 V AC

HA-180D-1 Yellow Mini-Stirrer, 110/115 V AC

HA-180E-1 Green Mini-Stirrer, 110/115 V AC

HA-180F-1 Blue Mini-Stirrer, 110/115 V AC

HA-180G-1 Red Mini-Stirrer, 110/115 V AC

HA-180H-1 Grey Mini-Stirrer, 110/115 V AC

HA-180I-1 Ivory Mini-Stirrer, 110/115 V AC

HA-731319 Micro Stir Bar (10 Pieces)

Add -2

HA-200

Power Supply 110/115 V AC12 V DC110/115 V AC

Installation Category II

Cover Material ABS plasticABS plasticAISI 316 Stainless Steel

Environment 0 to 50°C (32 to 122°F); RH max 95%

Dimensions 120 x 120 x 45 mm (4.8" x 4.8" x 1.8")

Weight 640 g (1.4 lbs) 610 g (1.3 lbs) 710 g (1.6 lbs)

HA-190M-1, HA-190M-0 & HA-200M

Are Supplied Complete W/ Micro Stir Bar & Instructions

HA-190M-1

Mini-Stirrer W/ ABS Cover, 110/115 V AC (Add -2 Instead Of -1 For The 230/240 V AC, 50/60 Hz Version)

HA-190M-0

Mini-Stirrer W/ ABS Cover, 12 V DC

HA-200M-1

Stainless Steel Cover, 100/115 V AC (Add -2 Instead Of -1 For The 230/240 V AC, 50/60 Hz Version)

Auto-Reverse Magnetic Stirrers with Tachometer

When stirring a solution, to work with a constant speed (Revolutions Per Minute) is an important factor in ensuring that the best repeatability in tests and processes is achieved. Without a tachometer, there is no way of knowing the RPM’s. HA-304N is a heavy-duty stirrer with a built-in tachometer. It is often desirable to stir in two directions in order to achieve maximum homogeneity. An advanced circuit allows HA-304N to reverse the direction of the stir at a user selected interval. The interval can be adjusted from 30 seconds up to 3 minutes. In addition to precision speed control, a limiter will also assure that the maximum speed will never be exceeded (Speedsafe).

Specifications HA-304N

HA-304N-1 (100/115 V AC)

HA-304N-2 (220/240 V AC) Magnetic Stirrer, Stainless Steel Cover, Micro Stir Bar & Instructions

Air-Operated Turbine Magnetic Stirrer

Low pressure air supply drives the magnetic stirrer. Eliminates sparking hazard from electrical sources. Ideal for use where potentially explosive solvent vapors are present. This compact, small-footprint stirrer only uses 3 to 8 psi (21-55kPa) air pressure and is ideal for stirring vessels up to 1 liter. Tubing is supplied to connect to an air supply. All parts are made from high impact polystyrene to ensure long life and easy clean up in case of spills.

Dimensions: 102 mm (4") diameter x 19 mm (3/4") high.

BEL-F37002-0000

Air-Operated Turbine Magnetic Stirrer

Why use a Magnetic Stirrer versus a Motorized Stirrer?

1. They are quieter

2. More efficient

3. No moving external parts that can break

4. A stirring bar is easy to clean

5. No lubricants are required

Pick up your Magnetic Stirrer & Bars

Octagon Spinbar® Magnetic Stirring Bars

Teflon® PTFE with Molded-On Pivot Ring. Sold Individually.

BEL-F37110-1218E*

Magnetic Stirring Bar, 12.7 x 3.2 mm (1/2" x 1/8")

BEL-F37110-1238E

Magnetic Stirring Bar, 12.7 x 9.5 mm (1/2" x 3/8")

BEL-F37110-5838E

Magnetic Stirring Bar, 15.9 x 9.5 mm (5/8" x 3/8")

BEL-F37110-0078E

Magnetic Stirring Bar, 22.2 x 8 mm (7/8" x 5/16")

BEL-F37110-7838E

Magnetic Stirring Bar, 22.2 x 9.5 mm (7/8" x 3/8")

BEL-F37110-0001E

Magnetic Stirring Bar, 25.4 x 8 mm (1" x 5/16")

BEL-F37110-0138E

Magnetic Stirring Bar, 25.4 x 9.5 mm (1" x 3/8")

BEL-F37110-0118E

Magnetic Stirring Bar, 28.6 x 8 mm (1 1/8" x 5/16")

BEL-F37110-0112E

Magnetic Stirring Bar, 38.1 x 8 mm (1 1/2" x 5/16")

Polygon Spinbar® Magnetic Stirring Bars Teflon® PTFE

Sold Individually.

Octagon Shaped Spinbar® Magnetic Stirring Bars

Color-Coded Teflon® PTFE

BEL-F37110-1128E

Magnetic Stirring Bar, 38.1 x 9.5 mm (1 1/2" x 3/8")

BEL-F37110-1122E

Magnetic Stirring Bar, 38.1 x 12.7 mm (1 1/2" x 1/2")

BEL-F37110-0158E

Magnetic Stirring Bar, 41.3 x 8 mm (1 5/8" x 5/16")

BEL-F37110-0178E

Magnetic Stirring Bar, 47.6 x 9.5 mm (1 7/8" x 3/8")

BEL-F37110-0002E

Magnetic Stirring Bar, 50.8 x 8 mm (2" x 5/16")

BEL-F37110-0238E

Magnetic Stirring Bar, 50.8 x 9.5 mm (2" x 3/8")

BEL-F37110-0212E

Magnetic Stirring Bar, 63.5 x 8 mm (2 1/2" x 5/16")

BEL-F37110-2128E

Magnetic Stirring Bar, 63.5 x 9.5 mm (2 1/2" x 3/8")

BEL-F37110-0003E Magnetic Stirring Bar, 76.2 x 12.7 mm (3" x 1/2")

*No pivot ring on this size.

All PTFE coded Spinbar® Magnetic Stirring Bars are available in red, yellow or blue. Sold Individually.

BEL-F37120-0012E

Polygon Spinbar® Magnetic Stirring Bars, 12.7 x 8 mm (1/2" x 5/16")

BEL-F37120-0112E

Polygon Spinbar® Magnetic Stirring Bars, 38.1 x 9.5 mm (1 1/2" x 3/8")

BEL-F37120-0030E

Polygon Spinbar® Magnetic Stirring Bars, 30 x 8 mm (1 3/16" x 5/16")

BEL-F37120-0050E

Polygon Spinbar® Magnetic Stirring Bars, 50 x 8 mm (2" x 5/16")

BEL-F37109-0034E* Magnetic Stirring Bar, Red, 12.7 x 3.2 mm (1/2" x 1/8")

BEL-F37109-0035E* Magnetic Stirring Bar, Yellow, 12.7 x 3.2 mm (1/2" x 1/8")

BEL-F37109-0036E*

Magnetic Stirring Bar, Blue, 12.7 x 3.2 mm (1/2" x 1/8")

BEL-F37109-0001E Magnetic Stirring Bar, Red, 12.7 x 8 mm (1/2" x 5/16")

BEL-F37109-0002E

Magnetic Stirring Bar, Yellow, 12.7 x 8 mm (1/2" x 5/16")

BEL-F37109-0003E

Magnetic Stirring Bar, Blue, 12.7 x 8 mm (1/2" x 5/16")

BEL-F37109-0004E

Magnetic Stirring Bar, Red, 15.9 x 8 mm (5/8" x 5/16")

BEL-F37109-0005E Magnetic Stirring Bar, Yellow, 15.9 x 8 mm (5/8" x 5/16")

BEL-F37109-0006E

Magnetic Stirring Bar, Blue, 15.9 x 8 mm (5/8" x 5/16")

*No pivot ring on this size.

Sugar Refractometers Analyze: fruits, energy drinks, puddings, soy milk, juices, jam, marmalade honey, soups, jelly, tofu, condiments.

Sugar Refractometers meet the requirements of the food industry. The HA-96801 Sucrose, HA-96802 Fructose, HA-96803 Glucose and HA96804 Invert Sugar Digital Refractometers are rugged, portable and water resistant for measurements in the lab or field. Each instrument offers a specific analysis to determine accurate sugar concentration. The actual measurement of refractive index is simple and quick and provides the operator a standard accepted method for sugar content analysis. Samples are measured after a simple user calibration with deionized or distilled water. Within seconds these instruments measure the refractive index of the sample and convert it to % by weight concentration units (or % Brix for HA-96801). These digital refractometers eliminate the uncertainity associated with mechanical refractometers and are easily portable for measurements in the field.

HA-96801, HA-96802, HA-96803 & HA-96804 Are Supplied W/ Battery & Instruction Manual

Sodium Chloride Refractometer

Analyze: salad dressings, cheeses, pickles, canned foods, jarred foods, condiments, energy drinks, milk, juices, soups, brines, whey.

HA-96821 Digital Sodium Chloride Refractometer meets the requirements of the food industry. This optical instrument employs the measurement of the refractive index to determine sodium chloride concentration in aqueous solutions used in food preparation. It is not intended for sea water salinity measurements. The measurement of refractive index is simple and quick and provides the user an accepted method for NaCl analysis. Samples are measured after a simple user calibration with deionized or distilled water. Within seconds the instrument measures the refractive index of the solution. The digital refractometer eliminates the uncertainty associated with mechanical refractometers and is easily portable for measurements where you need them.

Specifications HA-96821

Range

g/100 g & g/100 mL 0 to 28 & 0 to 34

Specific Gravity 1.000 to 1.216

°Baumé 0 to 26

Temperature 0 to 80°C (32 to 176°F)

Resolution g/100 g & g/100 mL 0.1 & 0.1

Specific Gravity 0.001

°Baumé 0.1

Temperature ± 0.1°C (0.1°F)

Accuracy (@ 20°C)

g/100 g & g/100 mL ± 0.2 & ± 0.2

Specific Gravity ± 0.002

°Baumé ± 0.2

Temperature ± 0.3°C (0.5°F)

Temperature CompensationAutomatic between 10 and 40°C (50 to 104°F)

Measurement Time Approximately 1.5 seconds

Minimum Sample Volume100 μL (to cover prism totally)

Light Source Yellow LED

Sample Cell Stainless Steel ring and flint glass prism

Enclosure Rating IP 65

Battery Type / Battery Life9 V / Approx. 5000 readings

Dimensions / Weight192 x 102 x 67 mm (7.6" x 4" x 2.6"), 420 g

HA-96821 Supplied W/ Battery & Instruction Manual

Seawater Refractometer

HA-96822 Digital Seawater Refractometer is a rugged portable, water resistant device that utilizes the measurement of the refractive index to determine the salinity of natural and artificial seawater, ocean water or brackish intermediates. Within seconds, the refractive index and temperature are measured and converted into one of 3 popular measurement units: Practical Salinity Units (PSU), Salinity In Parts Per Thousand (ppt), or Specific Gravity (S.G. (20/20)). All conversion algorithms are based upon respected scientific publications using the physical properties of seawater (not sodium chloride).

Specifications HA-96822

Range PSU 0 to 50

ppt 0 to 150

Specific Gravity (20/20)1.000 to 1.114

Temperature 0 to 80°C (32 to 176°F)

Resolution PSU 1 ppt 1

Specific Gravity (20/20)0.001

Temperature ± 0.1°C (0.1°F)

Accuracy (@ 20°C)

PSU ± 2 ppt ± 2

Specific Gravity (20/20) ± 0.002

Temperature ± 0.3°C (0.5°F)

Temperature Compensation Automatic between 10 and 40°C (50 to 104°F)

Measurement TimeApproximately 1.5 seconds

Minimum Sample Volume 100 μL (to cover prism totally)

Light Source Yellow LED

Sample Cell Stainless Steel ring and flint glass prism

Auto-Off After 3 minutes of non-use

Enclosure Rating

HA-96822

Supplied W/ Battery & Instruction Manual

Portable Refractometers

Measure the concentration of sugar, salt, lubricants, antifreeze, cutting fluids & more. Available with or without Automatic Temperature Compensation.

Features

•Easy to operate, provides accurate and repeatable measurements on easy to read scales

•Requires only 2 or 3 drops of solution

•The prism and lens with a simple focus adjustment provides repeatable results

•Complete with case, calibration screwdriver, and calibration solution

Laboratory Water Purification System

Features

•Exceeds Type I water standards

•Uses large media cartridges for low operating costs

•Need for storage eliminated

•Ideal for universities, hospitals, and research

The unit takes feed water supply through three disposable cartridges and a 0.2 micron final filter to supply high purity water meeting or exceeding Type I water requirements. A quiet recirculation pump ensures consistent water purity. A built-in timer cycles the unit on and off to prevent extra wear on components and eliminates heat build up. Resistivity is temperature compensated and monitored on a digital display. Adjustable set point for notification of cartridge change out is provided. Disposable VP Series cartridges are spring loaded into position without the use of tools. Unit can be free standing or wall mounted. Direct Feed option will have a secondary port to feed auxiliary lab equipment for on-demand Type I water. Includes: a built in pressure regulator & 0.2 micron final filter. For pyrogen free water, use a 0.05 micron ultrafilter. Media cartridges not included. When feeding from a central DI, RO, or distilled water source, (3) mixed bed cartridges are recommended.

Recommended feed water influent: DI, RO or Distilled.

Specifications ARIES-1102

Max. Flow Rate 2.0 lpm (0.5 gpm)

Max. Inlet Pressure 60 psi

Min. Inlet Pressure 20 psi

Max. Inlet Temperature 100°F

Inlet Connection 3/8" Tube

Outlet Connection 1/4" FNPT

Bacteria Filter 0.2 micron capsule

Weight 32 lbs (dry) / 38 lbs (operating)

Dimensions 25" H x 23" W x 8.5" D

Gemini Water System Ultrapure Water Purification

The Gemini Ultra High Purity System provides up to 3.7 lpm of 18.2 megohm, 0.2 micron filtered water. The multi-pass ultraviolet system irradiates the water at three separate passes in the recirculation loop. The dispensing port is continuously exposed to UV for complete sterility at the outlet.

System meets and exceeds ASTM & NCCLS

Type I water and ASTM Biomedical grade specifications.

Volumetric dispensing is controlled by a soft touch key pad and the unit can be programmed to dispense four different set points. An integral drain basin accommodates filling large containers and controls drips and spills.

Standard unit includes (2) Low TOC high purity and (1) 0.2 micron cartridges.

Options available are UV TOC destruct, ultrafiltration, RO pretreatment, recirculating dispensing gun, and basinless Gemini-MB version.

Recommended feed water influent: DI, RO or Distilled.

ARIES-1102

Aries High Purity Water System W/ 0.2 Micron Filter

ARIES-1102D

Aries High Purity Water System W/ 0.2 Micron Filter / Direct Feed

ARIES-1105

Aries High Purity Water System W/ 0.05 Micron UF Filter

ARIES-1105D

Aries High Purity Water System W/ 0.05 Micron Filter / Direct Feed

System Accessories

HPA-002

UV Combination For Bacteria & TOC

HPA-001

Dispensing Gun & Tubing Kit

VPK-3805

Cartridge Kit (3 Included Per Kit)

VP Series Tap Feed Kit - (1) Pretreatment & (2) High Purity

VPK-4010

VP Series RO/DI Feed Kit - (3) High Purity

Filter Replacements

PF-00-6402

0.2 Micron Capsule Filter (1/4" MNPT x Hose Barb)

PF-00-6505

0.05 Micron Capsule Ultrafilter (1/4" MNPT x Hose Barb)

Features

•Exceeds Type I water standards

•Highest flow rate of 3.7 lpm

•Multi-pass UV with sterile dispensing port

•Programmable up to four separate volumes

•Ideal for reagent preparation, carboy filling, life science, and analytical systems

GEMINI-1102

Gemini High Purity Water System W/ 0.2 Micron Filter. Counter Top Unit

GEMINI-110U

Gemini High Purity Water System W/ 0.05 Micron Ultrafilter. Counter Top Unit

GMB-100

Specifications GEMINI-1102

Max. Flow Rate 3.7 lpm (1.0 gpm)

Max. Inlet Pressure 90 psi

Min. Inlet Pressure 20 psi

Max. Inlet Temperature 100°F

Inlet Connection 3/8" Tube

Outlet Connection 0.2" FNPT

Bacteria Filter 0.2 micron capsule

Weight 50 lbs (dry) / 55 lbs (operating)

Dimensions 24" H x 28" W x 19" D

Gemini-MB High Purity Water System W/ 0.2 Micron Filter.

Wall Mounted Unit

GMB-100UF

Gemini-MB High Purity Water System W/ 0.05 Micron Ultrafilter

System Accessories. Wall Mounted Unit

HPA-002

UV Combination For Bacteria & TOC

HPA-001

Dispensing Gun & Tubing Kit

AFK-006

GEMINI-1102 Or GMB-100 Replacement Kit

(2) Low TOC High Purity & (1) 0.2 Micron Cartridges

AFK-007

GEMINI-110U Or GMB-100UF Replacement Kit

(3) Low TOC High Purity & (1) 0.05 Micron Ultrafilter

Made in Japan

EMZ-5 BINOCULAR ZOOM STEREO BODY

Features

•Binocular zoom body with crisp, high resolution, precision optics provide an excellent, erect, unreversed stereoscopic image

•Rugged all metal body designed to last a lifetime

•Zoom Range: 0.7X to 4.5X

•Zoom Ratio: 6.5:1

•Ergonomically positioned bilateral zoom controls

•Binocular eyetubes inclined at 45° for fatigue free viewing

•Total magnification range available with auxiliary lenses and eyepieces: 2.1X to 270X

•Dual dioptric adjustments (± 5 diopters) allows the specimen to remain in focus throughout the entire zoom magnification range

•Interpupillary distance adjustment from 54 mm to 75 mm

•Binocular body can be rotated a full 360° and locked in any position

•Standard working distance: 93 mm

•Working distance with optional auxiliary lenses: 34 mm to 251 mm

EMZ-8TR TRINOCULAR ZOOM STEREO BODY

Features

•Trinocular zoom body for use in photographic and video applications. When the beamsplitter is engaged, 100% of the light from the left optical path is directed to the phototube. The image can still be viewed through the right eyetube.

•Crisp, high resolution, precision optics provide an excellent, erect, unreversed stereoscopic image

•Rugged all metal body designed to last a lifetime

•Zoom Range: 0.7X to 4.5X

•Zoom Ratio: 6.5:1

•Ergonomically positioned bilateral zoom controls

•Binocular eyetubes inclined at 45° for fatigue free viewing

•Total magnification range available with auxiliary lenses and eyepieces: 2.45X to 202.5X

•Dual dioptric adjustments (± 5 diopters) allows the specimen to remain in focus throughout the entire zoom magnification range

•Interpupillary distance adjustment from 54mm to 75 mm

MT-EMZ-5

Binocular Zoom Stereo Body, 0.7X to 4.5X, W.D. 93 mm

MT-MA502

10X Super Wide Field Eyepiece

MT-P-STAND

Basic Pole Stand W/ "F" Focusing Holder Mounted On A Plain Base

MT-PK-STAND

An Extended Working Distance Ergonomic Pole Stand W/ 250 mm Pole & "F"

Focusing Holder Mounted On An Ergo Base

MT-PKL2-STAND

An Ergonomic Pole Type Stand W/ Dual LED Illumination System

MT-PBH-STAND

Pole Type Stand W/ Focusing Holder & W/ Dual Halogen Illumination System

P Stand

Basic pole stand with "F" focusing holder mounted on a plain base. Supplied with one 94.5 mm diameter reversible black and white stage plate and two stage clips. (8.35" / 212 mm pillar)

PK Stand

An extended working distance ergonomic pole stand with 250 mm pole and "F" focusing holder mounted on a ergo base. Supplied with one 94.5 mm diameter reversible black and white stage plate and two stage clips. The PK can be accessorized with an optional 20 watt halogen incident illuminator with stand alone power supply.

Base Dimensions: 330 mm (12.99") wide x 280 mm (11") deep.

PKL-2 Stand

An ergonomic pole type stand with transmitted and incident LED illumination system, coarse focusing holder, 5 watt LED incident llumination, dual variable intensity control, removable glass stage plate, two stage clips, and power cord. Transmitted light base features an extremely bright multiple LED array with milk white diffusion plate and clear glass stage plate. Automatic voltage(100 V to 240 V) sensing power supply. Optional accessories include analyzer/polarizer for transmitted light pol work, white/black stage plate, 4" pole extension, and mechanical stages.

Base Dimensions: 330 mm (12.99") wide x 280 mm (11") deep

PBH Stand

Illuminated pole stand with "F" focusing holder. Provides both transmitted and incident halogen illumination with variable intensity control. Supplied with 94.5 mm diameter clear glass stage plate, reversible black and white stage plate and two stage clips. Illuminators may be operated independently or simultaneously. Total Height: 280 mm (11.02"). Pillar Height: 212 mm (8.35").

Base Dimensions: 160 mm (6.30") wide by 240 mm (9.44") deep.

•Binocular body can be rotated a full 360° and locked in any position

•Standard working distance: 104 mm

•Working distance with optional auxiliary lenses: 57 mm to 250 mm

MT-EMZ-8TR

Trinocular Zoom Stereo Body, 0.7X to 4.5X, W.D. 104 mm

MT-EMZ-13TR

Trinocular Zoom Stereo Body, 1X to 7X, W.D. 90 mm

MT-MA502

10X Super Wide Field Eyepiece

MT-P-STAND

Basic Pole Stand W/ "F" Focusing Holder Mounted On A Plain Base

MT-PK-STAND

An Extended Working Distance Ergonomic Pole Stand W/ 250 mm

Pole & "F" Focusing Holder Mounted On An Ergo Base

MT-PKL2-STAND

An Ergonomic Pole Type Stand W/ Dual Led Illumination System

MT-PBH-STAND

Pole Type Stand W/ Focusing Holder & W/ Dual Halogen Illumination System

RZ SERIES

RZ Series CMO Stereo Microscopes are advanced, high-performance, modular, stereo microscopes specifically designed with today's demanding microscopy applications in mind. Engineered around a common main objective and parallel optical paths, the RZ Series offers crisp, distortion-free, high-resolution images at magnifications ranging from 3.75X to 300X. Browse the optical components, photo/video accessories, and stands to configure a system to meet your needs.

The RZ features a 10:1 zoom ratio with built-in variable dual-iris diaphragms and 12 positive click stops through the zoom range. Two perpendicular columns of eight zoom lenses in four groups move in smooth motion controlled by ergonomically sized and positioned zoom knobs. A magnification indicator is conveniently located on the zoom control.

Exterior components are painted with special anti-static finish which is especially useful when working in sensitive environments. Two types of viewing heads are available.

The body is the heart of the modular zoom stereo microscope design. It contains the objectives and prisms that capture the image of the specimen, magnify it, and direct it to the eyetubes. The body by itself cannot be used to view an object; it also needs eyepieces that further magnify the image and allow the viewer to see, and it must be mounted on a stand that has a focus mechanism for raising and lowering the body.

MT-RZ-B

Zoom Body & Focus Block, 1:10 Zoom Ratio W/ Built-In Iris Diaphragm & Click Stops *

MT-748

Binocular Head, 45° Incline

MT-749

Ergonomic Binocular Head, Inclination Adjustable Vertically From 10° To 150° *

MT-730

UWF 10X Eyepiece, High Eyepoint, Focusable, Fn 24 (Each), Receives 25 mm O.D. (Reticule) *

MT-742

Plan Objective, 1.0X For The MT-RZ-B, W.D. 76 mm *

MT-RZP-STAND

Plain Stand W/ Black Plastic Stage Plate, 12.79" (325 mm) Tall Pillar

MT-RZT-STAND

Transmitted Light Stand For Brightfield Illumination, 12.79" (325 mm) Tall Pillar *

MT-MA-964

LED Ring Illuminator W/ Transformer, 115 V - Mounts Directly To RZ Series Objective W/O Adapter

MT-MA-751

Photo / Video Attachment

* As shown on picture.

Zoom stereo microscope bodies are the most flexible because they offer a wider range of magnification than turret (EMT) or fixed (EMF) bodies. Much like the zoom lens on a camera, zoom objectives increase and decrease magnification progressively, causing the specimen to grow or shrink smoothly in the eyes of the viewer.

Compound Biological Microscope

MT4000

The Meiji MT4000Series Biological Laboratory Microscopes include the advanced Infinity Corrected Optical System. The MT4000 series includes:

Objective Lenses: DIN Infinity Corrected Optical System (ICOS) Plan brightfield 4X, 10X, s40X and s100X oil mounted in smooth-operating, ball bearing mounted, quintuple nosepiece.

Viewing Heads: Siedentopf-type binocular head or trinocular head for camera integration. Each head has the eyetubes inclined at 30° with the left eyetube having graduated diopter settings. The interpupillary distance is adjustable between 53 mm - 75 mm. An 80/20 beamsplitter for the trinocular tube can be engaged for photo work. (100% to eyetubes or 80% to phototube & 20% to the eyetube.)

Eyepieces: 10X Widefield High Eyepoint eyepieces F.N.20 are standard with a 19 mm reticle mount. 15X and 20X eyepieces are available as an option. Also avilable - Widefield High Eyepoint 10X focusable eyepiece that accept 25 mm reticles.

Total Magnification: 40X, 100X, 400X and 1000X

Specimen Stage: Ceramic coated right-handed (left-handed avilable upon request), flat top stage measures 171 mm x 115 mm and travels 78 mm(X) x 52 mm(Y). Ergonomically positioned coaxial drop down controls.

Illumination: Powerful white LED or 30 watt halogen illumination provides enhanced image quality and brightness for the observation of specimens and photomicroscopy.

Light Focusing: Abbe 1.25 NA Condenser in quick change dovetail mount.

Size & Weight:

Binocular - 390 mm (15.4") D x 410 mm (16.1") H x 210 mm (8.3") W, 8 kg (17.6 lbs)

Trinocular - 390 mm (15.4") D x 465 mm (18.3") H x 210 mm (8.3") W, 8.7 kg (19.2 lbs)

Meiji Techno offers EM Series zoom stereo microscope bodies with a wide range of magnifications and working distances. All EM bodies come with dust covers and rubber eyeshields. Eyepieces are sold separately and we have a wide selection to offer.

MT-4200L

Binocular Compound Biological Microscope W/ LED Illuminator

MT-4200H

Binocular Compound Biological Microscope W/ 30 W Halogen

MT-4300L

Trinocular Compound Biological Microscope W/ LED Illuminator

MT-4300H

Trinocular Compound Biological Microscope W/ 30 W Halogen

Metallurgical MT7000

The MT7000Metallurgical Reflected Light Microscope includes: Objective Lenses: DIN Infinity Corrected Optical System (ICOS) Plan Epi 5X, 10X, 20X and 50X mounted in smooth-operating, ball bearing mounted, quintuple nosepiece.

Viewing Heads: Siedentopf-type binocular head or trinocular head for camera integration. Each head has the eyetubes inclined at 30° with the left eyetube having graduated diopter settings. The interpupillary distance is adjustable between 53 mm - 75 mm. An 80/20 beamsplitter for the trinocular tube can be engaged for photo work. (100% to eyetubes or 80% to phototube & 20% to the eyetube.) 30 mm I.D. eyetube.

Eyepieces: SWH10X Widefield High Eyepoint eyepieces F.N.22 are standard with a 25 mm reticle mount. 15X and 20X eyepieces are available as an option.

Also avilable - Widefield High Eyepoint 10X focusable eyepiece that accept 25 mm reticles.

Total Magnification: 50X, 100X, 200X and 500X

Specimen Stage: Ceramic-coated flat-top stage 191 mm x 126 mm, with 100 mm x 100 mm of travel. Equipped with precision ball bearing guides and low position drop down coaxial controls for X-Y movement.

Illumination: Vertical illuminator with full Koehler design equipped with high intensity 6 V, 30 Watt halogen light source, field iris, aperture iris and filter slots. Capable of brightfield or simple reflected light polarization techniques. Includes blue clear, green clear, polarizing and neutral density (ND 50) filters in mounts. Automatic voltage (100 V~240 V) sensing power supply and variable rheostat control are built into the microscope base.

Focusing: Ergonomically low positioned coaxial focusing controls allow the operator to work with their forearms relaxed on the working surface. Range of travel is 23 mm. Rotation of fine focus is 0.2 mm per revolution.

Size & Weight:

Binocular - MT7000 424.5 mm (16.7") D x 471 mm (18.5") H x 210 mm (8.3") W, 8.5 kg (18.7 lbs)

Trinocular - MT7100 424.5 mm (16.7") D x 526 mm (20.7") H x 210 mm (8.3") W, 9.2 kg (20.3 lbs)

Asbestos Combo PLM - PCM Microscopes

The MT6800 Series Combo PLM - PCM (Polarized Light and Phase Contrast) Microscopes for Asbestos fiber identification applications are manufactured pursuant to NIOSH 9002 Reference methods and NIOSH 7400 and OSHA ID 160 Reference methods. Each model comes with Strain free Plan DIN brightfield POL objectives, rotatable stage with 360 degree graduations, POL / PHASE / Dispersion Staining Abbe condenser and builtin Koehler illuminator as standard equipment.

Viewing Heads: Model MA952 is the Siedentopf-type binocular head and Model MA953 is the trinocular head for camera integration. Each head has the 23.2 mm eyetubes inclined at 30 degrees with the left eyetube having graduated diopter settings. The interpupillary distance is adjustable between 53 mm - 75 mm. An 80/20 beamsplitter for the trinocular tube can be engaged for photo work. Each head has the new integrated reticle angle compensation system. When the IP distance or number is changed, the crossline reticle remains perpendicular in the FOV.

Eyepieces: 10X Widefield High Eyepoint eyepiece F.N.20, 10X Widefield High Eyepoint

Made in Japan

focusable eyepiece that has a 21 mm crossline reticule and guide pin, and 10X Widefield High Eyepoint Compensating Focusing eyepiece, F.N.20 with Walton & Beckett reticle are standard.

Objective Changer: The smooth-operating, ball bearing mounted, quadruple nosepiece provides effortless objective changes.

Objectives: Assortment of U. Planachromat Phase and S. Planachromat Polarizing Infinity Corrected objectives are available.

Stage: Ceramic coated 360 degree rotatable fully indexed stage with vernier and stage clips.

Condenser: Strain free Abbe condenser, N.A. 1.25 with centerable annuli for 10X, 20X, 40X phase or 10X, 20X, 40X dispersion staining objectives in sliding mount, with iris diaphragm and dovetail mount.

Illumination: Powerful 30 watt transmitted light Koehler halogen illumination provides enhanced image quality and brightness for the observation of specimens.

Accessories: All MT6800 series models come with a first order red compensating plate (also called gypsum or sensitive tint plate), an analyzer in sliding mount, bertrand lens, blue clear and green interference filters, centering telescope, and stage micrometer.

MT-6820

Binocular PLM-PCM Microscope

MT-6830

Trinocular PLM-PCM Microscope

MT-7000 Binocular Metallurgical Microscope

MT-7100 Trinocular Metallurgical Microscope

MT-9900

The MT9900 series incident and transmitted light polarizing microscopes include the following:

Objective Lenses: DIN Infinity Corrected Optical System (ICOS) Strain Free Plan 4X, 10X and s40X mounted in smooth-operating, ball bearing mounted, quintuple nosepiece.

Viewing Heads: Siedentopf-type binocular head or trinocular head for camera integration. Each head has the eyetubes inclined at 30° with the left eyetube having graduated diopter settings. The interpupillary distance is adjustable between 53 mm - 75 mm. An 80/20 beamsplitter for the trinocular tube can be engaged for photo work. (100% to eyetubes or 80% to phototube & 20% to the eyetube.)

Eyepieces: One KHW10X Focusing eyepiece with guide pin and crossline reticle and one widefield compensating eyepiece F.N.20 are standard with a 21 mm reticle mount. Tube O.D. 23.2 mm.

Total Magnification: 40X, 100X, 400X

Specimen Stage: Ceramic-coated 360 degree rotatable fully indexed stage with vernier and stage clips. Stage is 175 mm in diameter.

Illumination: Transmitted Koehler 6V, 30W halogen illumination and reflected 6 V, 30 W Koehler halogen illumination.

Condenser: Strain Free Abbe N.A. 1.25 condenser with iris in dovetail mount with swing-out top lens for lower power objectives

Focusing: Ergonomically low positioned coaxial focusing controls allow the operator to work with their forearms relaxed on the working surface. Range of travel is 23 mm. Rotation of fine focus is 0.2 mm per revolution.

Included: MT-9900 series incident and transmitted brightfield models with focusable bertrand lens, rotatable analyzer, and 3-position slider with 1st order red, 1/4 wave plate, brightfield position.

Plain Microscope Slides

Note: C-mount adapter and digital camera are optional items and are not included in the price below.

MT-9920

Binocular Polarizing Microscope W/ Incident & Transmitted Illumination

MT-9930 Trinocular Polarizing Microscope W/ Incident & Transmitted Illumination

Superfrost / Colorfrost Microscope Slides

Slides have a raised printed writing surface that eliminates the need for tedious relabeling of slides. The unique opaque coating provides a bright background for excellent contrast and smooth surface makes it easier to write on. The durable, opaque tab is inert to common laboratory, chemicals and reagents.

Features

•Autoclavable

•Durable, opaque tab

•Available in an array of tab colors

Made from the highest purity, corrosion-resistant glass. Slides are packed in airtight wrapper to keep out dust and moisture that can cause sticking.

TF-2950

Plain Microscope Slides, 25 x 75 mm, 1 mm Thick, 1 Gross (144 Slides)

TF-2954

Plain Microscope Slides, 25 x 75 mm, 1.2 mm Thick, 1 Gross (144 Slides)

TF-4951

Superfrost / Colorfrost Microscope Slides, White, 25 x 75 mm, 1 mm

TF-5951

Thick, 1 Gross (144 Slides)

Superfrost / Colorfrost Microscope Slides, Blue, 25 x 75 mm, 1 mm Thick, 1 Gross (144 Slides)

TF-6951

Superfrost / Colorfrost Microscope Slides, Green, 25 x 75 mm, 1 mm Thick, 1 Gross (144 Slides)

TF-7951

Superfrost / Colorfrost Microscope Slides, Pink, 25 x 75 mm, 1 mm Thick, 1 Gross (144 Slides)

TF-8951

Superfrost / Colorfrost Microscope Slides, Yellow, 25 x 75 mm, 1 mm Thick, 1 Gross (144 Slides)

TF-9951A

Superfrost / Colorfrost Microscope Slides, Aqua, 25 x 75 mm, 1 mm Thick, 1 Gross (144 Slides)

TF-9951L

Superfrost / Colorfrost Microscope Slides, Lilac, 25 x 75 mm, 1 mm Thick, 1 Gross (144 Slides)

TF-9951T

Superfrost / Colorfrost Microscope Slides, Tan, 25 x 75 mm, 1 mm Thick, 1 Gross (144 Slides)

TF-9951BO

Superfrost / Colorfrost Microscope Slides, Orange, 25 x 75 mm, 1 mm Thick, 1 Gross (144 Slides)

MT-9920

MT-9930

Coverglass

Made of the finest optical borosilicate glass. The coverglass is corrosion resistant, and ready for use. Manufactured of glass which is stickresistant. It is available in squares, circles and rectangles. Packed in 1 oz plastic boxes with custom-molded bases for easy one-at-a-time dispensing. Available in all standard and non-standard sizes.

Superslip Cover Glass

Superslip® Cover Glass is uniquely manufactured to eliminate sticking and reduce waste. Our processing techniques result in superior quality. This product combines specialized production methods and moisture resistant packaging to prevent sticking. Superslip Cover Glass is the product you need to make your coverslipper run smoothly.

TF-22X22-1

Coverglass, 22 x 22 mm, No. 1 Thickness, 1 oz

TF-24X40-1

Coverglass, 24 x 40 mm, No. 1 Thickness, 1 oz

TF-24X50-1

Coverglass, 24 x 50 mm, No. 1 Thickness, 1 oz

TF-24X60-1

Coverglass, 24 x 60 mm, No. 1 Thickness, 1 oz

TF-12CIR-1

Coverglass, 12 mm, Circular, No. 1 Thickness, 1 oz

Spectrafuge™ Mini Centrifuges and Slide Spinner

Compact in design and personal sized, the Spectrafuge™ Mini is ideal for microfiltration and quick spin downs from the walls and caps of microcentrifuge tubes while the Slide Spinner is designed for drying microarray slides before scanning.

The Spectrafuge™ Mini is supplied with rotors and adapters to accommodate 1.5 ml, 0.5 ml and 0.4 ml tubes as well as 0.2 ml strips and individual tubes. The rotors are easily interchanged.

The Slide Spinner dries two slides in as little as 10 seconds for quality imaging and screening results. The slides are placed into cassettes that catch all liquid without splashing. Cassettes are reuseable. Both centrifgues feature a translucent lid that pivots on a durable stainless steel hinge pin. A switch on the side of the centrifuge starts and stops operation. Alternatively, with the switch in the "on" position, the centrifuge can be started and stopped by closing and opening the lid. The Spectrafuge™ Mini is available in five different lid colors: gray, blue, teal, purple and red.

TF-24X40-1WYO 24 x 40 mm, No. 1 Thickness, 1 oz

TF-24X50-1WYO 24 x 50 mm, No. 1 Thickness, 1 oz

TF-24X60-1WYO 24 x 60 mm, No. 1 Thickness, 1 oz

TF-24X50-1.5WYO 24 x 50 mm, No. 1.5 Thickness, 1 oz

For Microtubes & Strip Tubes or Slides

SpecificationsSpectrafuge™

LAB-C1301-120V

Spectrafuge™ Mini Complete W/ 1.5 / 2.0 ml Rotor, Strip Tube Rotor, 0.5 ml & 0.4 ml Adapters, Smoke Gray Lid, 120 V

LAB-C1300-RT

Replacement Rotor For 6 x 1.5 / 2.0 ml Tubes

LAB-C1300-RTS

Replacement Rotor For 0.2 ml Strip Tubes Or Individual 0.2 ml Tubes

LAB-C1205

Individual Adapters For 0.5 / 0.6 ml Tubes, 6/Pack

LAB-C1206

Individual Adapters For 0.4 / 0.25 ml Tubes, 6/Pack

LAB-C1222

Individual Adapters For 0.2 ml Thermal Cycling Tubes, 6/Pack

LAB-C1303-T-120V Slide Spinner W/ Two Slide Drying Cassettes, 120 V

LAB-C1303-SC

Extra Cassettes For Slide Spinner Centrifuge, 2/Pack 230 V also available upon reques. Color preference add letter to the end of the part number. (B = Blue, T = Teal, P = Purple, R = Red)

Spectrafuge™ 24D

The Spectrafuge™ 24D combines innovations such as a unique, easy access rotor, exclusive multi-flow air cooling system and high performance drive with a digital microprocessor that precisely regulates operation.

Parameters are selected with two "smart" knobs and values are shown on large, easy to read, LED displays. Speed can be set and displayed in rpm or g-force while runs may be timed, continuous or momentary. The unique design of the 24-place rotor allows easy access to the tops of the tubes. An optional StripSpin™ adapter fits onto the rotor for spinning 0.2 ml tubes and strips. A powerful, brushless motor quickly accelerates the rotor to set speed.

Air enters the centrifuge through vents on the back of the housing and is circulated in multiple directions to maximize cooling. The result is a cool running microcentrifuge that keeps samples close to ambient temperature, even during extended runs at maximum speed. For samples that require below ambient temperatures, the Spectrafuge™ 24D may be used in a cold room.

LAB-C2400-120V

Spectrafuge™ 24D Digital Microcentrifuge, Standard Gray, 120 V

LAB-C2400-SS

StripSpin™ Adapter For 0.2 ml Tubes & Strips, Fits Onto Standard Rotor

LAB-C1205

Individual Adapters For 0.5 / 0.6 ml Tubes, 6/Pack

LAB-C1206

Individual Adapters For 0.4 / 0.25 ml Tubes, 6/Pack

LAB-C1222

Individual Adapters For 0.2 ml Thermal Cycling Tubes, 6/Pack 230 V also available upon request. Color preference add letter to the end of the part number. (B = Blue, T = Teal, P = Purple, R = Red)

Specifications Spectrafuge™ 24D

Speed Range 500 rpm to 13,300 rpm

Maximum RCF 16,300 x g

Maximum Capacity 24 x 1.5 / 2.0 ml

Timer 1 to 30 minutes or continuous "Quick" button for momentary operation

Ambient Operating Range 4° to 35°C

Dimensions (W x D x H) 9.25" x 11.5" x 8.5" (23.5 x 29.3 x 21.6 cm)

Weight 18 lbs (8.1 kg)

Electrical 230 V-, 50 Hz or 120 V-, 60 Hz

Spectrafuge™ 6C

The Spectrafuge™ 6C has been designed for quick production of PPP (platelet poor plasma) and PRP (platelet rich plasma) as well as other applications in the clinical or research laboratory.

The included 6 place rotor is capable of running round or conical bottom 15 ml or 10 ml tubes. Adapters for smaller tube sizes are available separately.

The control panel of the centrifuge features easy turn knobs and large digital displays for time and speed. Time can be set as low as 30 seconds and to the "On" position for a continuous run.

The Spectrafuge™ 6C is the smallest centrifuge in its class. The 8" x 9" footprint makes it ideal for almost any laboratory and it can easily be transported from lab to lab.

Specifications Spectrafuge™ 6C

Maximum Speed 6,500 rpm

Maximum RCF 4,000 x g

Maximum Capacity 6 x 15 ml

Timer 30 seconds to 30 minutes with continuous and hold features Accel. /Decel. 14 / 27 seconds

Dimensions ( W x D x H) 8.25" x 9.5" x 7" (21 x 24 x 18 cm)

LAB-C0060-120V

Spectrafuge™ 6C Centrifuge W/ 6 x 15 ml Angle Rotor, 120 V

LAB-C0200-17A Adapters for 5 ml (12 x 75 mm) & 7 ml (13 x 100 mm) Tubes, 6/Pack 230 V also available upon request.

Rotor Angle 30°

Electrical 120 V or 230 V, 50-60 Hz

Timer 1 to 60 minutes or continuous "Quick" button for momentary operation

Temperaure Range (Z 300 K) -10° to +40°C

Weight Z 300 88 lbs (40 kg)Z 300 K 167.2 lbs (76 kg)

Electrical* 120 V~, -60 Hz

*Other voltages available upon request.

Tubes Can Be Used with Spectrafuge™

Z 300 and Refrigerated Z 300 K, Medium Capacity Centrifuges

Universal Laboratory Centrifuges

The Z 300 and Z 300 K are the most economical of the universal microprocessor controlled units in the Hermle line. These centrifuges accommodate microplates and tubes up to 100 ml in swing-out and fixed angle rotors. A broad speed range and high g-force make them ideal for applications from clinical to molecular biology.

A digital microprocessor controls all operating parameters including speed and time. Overspeed conditions are eliminated by the rotor recognition program which automatically identifies each rotor and limits it to the maximum rated speed. Improperly loaded rotors trigger the safety imbalance detection system which stops operation of the centrifuge. The powerful, induction drive in the Z 300 centrifuges quickly accelerates rotors to the preset speed. Two acceleration and deceleration rates can be chosen to protect fragile samples. Operation of the centrifuge may be timed, continuous or momentary Ambient air circulates throughout the chamber of the Z 300 preventing significant rises in sample temperature. The refrigeration system in the Z 300 K maintains all rotors at the set temperature regardless of rotor speed.

LAB-C0300

1.5 ml Non-Sterile, SelfStanding Polypropylene (PP) Microtube

0.5 ml Polypropylene (PP) Microcentrifuge Tube with

Features

•Maximum rpm: 26,000

• Autoclavable at 130°C

• Suitable for Spectrafuge™ 24D

GS-111558-C Natural, 1.5 ml Microcentrifuge Tubes, 1000/Bag

GS-111558-B Blue, 1.5 ml Microcentrifuge Tubes, 1000/Bag

GS-111558-P Pink, 1.5 ml Microcentrifuge Tubes, 1000/Bag

Note: Order caps separately.

Features

1.5 ml Graduated Polypropylene (PP) Microcentrifuge Tube with Attached Snap Cap GS-111722 1.5 ml Microtube, 1000/Case

•Suitable for Spectrafuge™ 24D

GS-111642 1.5 ml Microcentrifuge Tube, 1000/Bag

0.5 ml Non-Graduated Polyethylene (PE) Microcentrifuge Tube with Attached Plug Cap

Features

•Beckman Type

•Not autoclavable

•Dimensions: 6 x 47 mm

Tubes Can Be Used with Spectrafuge™

6C & Z 300 & Z 300 K

15 ml

Clinical

Grade

Tubes Can Be Used with Z 300 & Z 300 K

24D

2 ml Graduated Polypropylene (PP) Microcentrifuge Tube with Attached Snap Cap Features

Polypropylene

(PP) Centrifuge Tube

Features

•Blue screwcap

•Black printed graduations

•White printed writing space

•Spin rate: 8,500 rpm

•Autoclavable (without cap)

50 ml Clinical Grade Polypropylene (PP) Centrifuge Tube

Features

•Blue Screwcap

•Black printed graduations

•White printed writing space

•Spin rate: 8,500 rpm

•Autoclavable (without cap)

•Temperature range: -40°C to +80°C

•Cap: High Density Polyethylene (HDPE)

15 ml Centrifuge Tube Acrylic (AC) with Red Screwcap (HDPE) & Printed Graduations

Acrylic is a stronger, scratch resistant material that offers equivalent chemical resistance to polystyrene, while providing exceptional clarity. Acrylic offers a greater spin rate which is 5,000 rpm (6,160 x g) compared to polystyrene, which has a limited spin rate of 1,700 rpm (3,000 x g).

Features

•Spin rate: 5,000 rpm (6,160 x g)

•Tubes are Rnase/Dnase free, non-pyrogenic and non-cytotoxic

•White graduation marks and writing area

•Temperature range:

Tube: -40°C to +70°C

Cap: -50°C to +100°C

GS-6287

50 ml Centrifuge Tube, Non-Sterile, Bulk, 500/Case

GS-6288

50 ml Centrifuge Tube, Sterile, 25/Bag, 500/Case

50 ml Polypropylene (PP) Centrifuge Tube with Red Screwcap (HDPE) & Printed Graduations

Features

•Autoclavable (without screwcap)

•Tubes are Rnase/Dnase free, non-pyrogenic and non-cytotoxic

•Spin rate: 10,000 rpm (12,320 x g)

•White graduation marks and writing area

•Temperature range:

Tube: -196°C to +121°C

Cap: -50°C to +100°C

GS-6244

50 ml Centrifuge Tube, Non-Sterile, Bulk, 500/Case

GS-6240

50 ml Centrifuge Tube, Non-Sterile, 25/Bag, 500/Case

GS-6241

50 ml Centrifuge Tube, Sterile, 25/Bag, 500/Case

GS-6267

15 ml Centrifuge Tube, Non-Sterile, Bulk, 500/Case

GS-6270

15 ml Centrifuge Tube, Sterile, 25/Bag, 500/Case

Mini Incubator

The Mini Incubator is compact and economically priced, yet offers features not typically found in a basic incubator. The housing is all metal, as is the door frame. A plexi-glass window in the door offers full visibility to the interior. One shelf is included, and can be adjusted to three different levels - additional shelves can be purchased to increase storage capacity. The heating elements in the Mini Incubator are incorporated into the bottom and sides of the housing. This provides better temperature stability and uniformity than other incubators in it's class. A grommet hole in the top of the unit can hold a thermometer for accurate temperature setting. In addition, the Mini Incubator has a port in the rear of the chamber which allows for an electrical cord to be routed out the back. The Mini LabRoller is a perfect fit and can be used in the Incubator with any of the available rotisseries. A combo package is available which includes the Mini Incubator and Labroller, along with the accessory rotisseries.

SpecificationsMini Incubator

Ext. Dimensions 11.2" x 11" x 13.2" (28.5 x 28 x 33.5 cm)

(W x D x H)

Int. Dimensions 9" x 7.9" x 7.9" (23 x 20 x 20 cm)

Weight 18.4 lbs (8.3 kg)

Capacity 0.375 cu ft (9.2 L)

Temperature

Range Ambient +5° to 60°C

Controls analog

Stability ± 0.6°C at 37°C (N.I.S.T. traceable thermometer)

Uniformity 0.65°C at 37°C

Electrical 120 V, 50/60 Hz, 0.6 A; 230 V, 50/60 Hz, 0.3 A

211DS Shaking Incubator

A small footprint, compact, stackable design and expanded temperature range make the 211DS Incubators ideal for molecular biology and general use. Its integral orbital shaker makes it highly versatile. The exclusive SmartChek temperature control system guarantees precise temperature control. Mechanical convection maintains a stable temperature environment and provides quick recovery after opening the door. A safety thermostat is located on the back of the unit. The insulated door has a large, double glass observation panel and opens nearly 180° for easy access.

Two full and one half shelf are supplied with each incubator. A flat platform and predrilled flask platform (clamps sold separately) are available for the 211DS.

Internal electrical outlet allows using small equipment such as GyroMini or Mini LabRoller Rotator inside the chamber of the 211DS.

Specifications 211DS Shaking Incubator

Chamber Volume 1.7 cu ft

Temperature Range/Display Ambient + 5° to 80°C in 0.1° increments/digital

Temp. Uniformity/Accuracy ± 0.25°C / ± 0.1°C

Shaker Speed/Orbit (DS) Variable, 20 to 400 rpm/19 mm

Flask Capacity (DS) 4 x 1 L, 5 x 500 ml, 9 x 250 ml, 16 x 125 ml

Construction interior - mirrored stainless, exterior - cold rolled steel

Chamber (W x D x H) 13.5" x 14.75" x 15" (34.3 x 37.5 x 38.1 cm)

Exterior (W x D x H) 16.75" x 21.75" x 23" (42.5 x 55 x 58 cm)

Weight D - 73 lbs (32.2 kg), DH - 83 lbs (37.7 kg), DHS - 85 lbs (38.2 kg)

Electrical 120 V~, 60 Hz

LAB-I-5110 Mini Incubator, Compact General Purpose, 120 V

LAB-I-5110-SHELF Additional Shelf, 22 x 18 cm

LAB-W0020-110C

Non-Toxic, Teflon Coated Thermometer For -20° To 110°C, W/ 1°C Resolution, 305 mm Long, 76 mm Immersion

LAB-I-5110-MLR Mini Incubator W/ Mini Labroller (H5500) Combo 230 V also available upon request.

LAB-I-5211-DS Digital Incubator / Shaker, Model 211DS

LAB-I-5211-SA

Stacking Adapter, Required When Stacking Incubators

LAB-I-5230

Flask Clamp Platform, Predrilled, Fits 211DS, 211DHS

LAB-I-5231

Flat Platform W/ Nonslip Rubber Mat, Fits 211DS, 211DHS

LAB-I-5231-D

Double Flat Platform W/ Nonslip Rubber Mat, Fits 211DS, 211DHS

LAB-S2040-85

Flask Clamp, 125 ml (Max. 15)

LAB-S2040-99

Flask Clamp, 250 ml (Max. 9)

LAB-S2040-09

Flask Clamp, 500 ml (Max. 5)

LAB-S2040-01

Flask Clamp, 1000 ml (Max. 4)

Digital Performance at Analog Prices!

Digital Dry Baths

A broad temperature range, to 150ºC, makes Digital Dry Baths useful for a variety of applications in molecular biology, histology, clinical, environmental and industrial laboratories. Although the price of these baths is comparable to analog models, they feature microprocessor control and digital setting/display of temperature. Digital performance at analog prices.

Microprocessor control. A microprocessor regulates the high wattage heaters in the baths to provide precise, accurate control. The exact desired temperature is easily set using the arrow keys on the sloped control panel while values are shown on the large digital display. No checking of a thermometer and readjusting temperature is necessary. The user calibration feature allows for easy calibration to in house standards when required. Additionally, there an RS232 port for recording block temperature activity. An available data-logging software package is used to link the unit to a computer. Stainless steel block chamber. The block chamber of the Digital Dry Baths is constructed of stainless steel, which acts as a heat sink and provides a uniform transfer of heat from the heating elements to the interchangeable blocks. The resulting block uniformity is excellent, ensuring that all samples receive the same temperature treatment, regardless of their position in the block.

Single and dual block models Two Digital Dry Bath models are available. The single block unit will accept all of the standard blocks. For increased capacity, the dual block unit accepts two standard blocks or one specially designed dual block. Each Dry Bath is supplied with a block lifter. Blocks sold separately.

SpecificationsDigital Dry Baths

Temperature Range Ambient + 5º to 150ºC

Temp. Resolution 0.1ºC

Temp. Uniformity ± 0.2ºC

Temp. Accuracy ± 0.3ºC

Block Chamber Stainless Steel

Block Capacity

Single Block Unit One standard block

Dual Block Unit Two standard blocks or one dual block

Dimensions 7.9" x 10.4" x 3.3" (20 x 26.5 x 8.3 cm)

Weight 5.5 lbs (2.2 kg)

Electrical 120 V~, 50/60 Hz (also available in 230 V)

Dry Bath Blocks

Construction High grade, nonporous aluminum with anodized surface

Thermometer WellYes (not in plate or slide blocks), required only for calibration purposes

Orbit™ 300 Multipurpose Vortexer

Three interchangeable platforms (available separately) accommodate a variety of sample containers to make the Orbit™ 300 a truly multipurpose shaker. The flat platform, covered with a nonslip rubber mat, holds plates, dishes, boxes, etc. The microplate platform will accommodate up to four microplates. The remaining platform has spring loaded retaining bars that adjust to hold flasks, bottles, racks and other containers in place Time and speed are set and displayed digitally. Values are shown on the large, three digit LED. The broad speed range allows the Orbit™ 300 to be used for gentle mixing as well as vigorous agitation.

The shaker housing is constructed of heavy gauge, coated steel to reduce motor noise and lend stability to the unit. This compact shaker can be used in temperature controlled environments making it ideal for cold room or incubator use.

LAB-S2030-300

Orbit™ 300 Digital Multipurpose Shaker, Base Only

LAB-S2030-10

Platform For Four Microplates

LAB-S2030-12

Flat Platform (30 x 30 cm) W/ Nonslip Rubber Mat

LAB-S2030-13

Spring Loaded Platform For Flasks, Bottles, Etc.

LAB-D1100 Digital Dry Bath, Single Block Capacity

LAB-D1200 Digital Dry Bath, Dual Block Capacity

LAB-D1101

Solid Block For Machining (No Holes)

LAB-D1102

Block, 48 x 0.2 ml PCR Tubes Or 6 x 0.2 ml

LAB-D1102A

Block, 20 x 2.0 ml Tubes

LAB-D1105

Block, 24 x 0.5 ml Tubes

LAB-D1105A

Block, 24 x 1.5 ml Tubes

LAB-D1106

Block, 35 x 6 mm Tubes

LAB-D1110

Block, 20 x 10 mm Tubes

LAB-D1112

Block, 20 x 12 mm Tubes

LAB-D1113

Block, 20 x 13 mm Tubes

LAB-D1115-TALL

Block, 12 x 15 ml Conical Tubes

LAB-D1116

Block, 12 x 15 or 16 mm Tubes

LAB-D1125

Block, 6 x 25 mm Tubes

LAB-D1150-TALL

Block, 5 x 50 ml Conical Tubes

LAB-D1196-PCR

Single Block, 96 Well PCR Plate, Skirted Or Nonskirted (For Single Block Unit Only

LAB-D1296

Dual Block, 96 Well Micro Plate Or 4 Slides (For Dual Block Unit Only)

LAB-D1296-PCR

Dual Block, 96 Well Pcr Plate, Skirted Or Nonskirted (For Dual Block Unit Only)

LAB-D12384

Block, 384 Well PCR Plate. Block Fits LAB-D1200 Only & Holds One Plate

LAB-D1100-RS232

Software & Cable Package For PC Connection

LAB-D1100-PS

Pop-Stopper For LAB-D1102, LAB-D1102-A, LAB-D1105, LAB-D1105-A Blocks

LAB-D1105A-RACK

AccuRack Tube Rack For 20 x 1.5 ml Tubes.

Compatible W/ The LAB-D1105A Block, 3/Pack

Features

•Three versatile platform options

•Shaking, mixing, agitating or vortexing

•Heavy-duty construction

•Safe for cold room or incubator use

Specifications Orbit™ 300 Multipurpose Vortexer

Speed Range 100 - 1200 rpm

Timer 0 to 99 minutes or continuous

Motion/Orbit Size Horizontally circular, 3 mm

Maximum Load 12.3 lbs (5.6 kg)

Ambient Operating Range + 4° to 65°C

Dimensions (W x D x H) 10.1" x 12.5" x 5" (25.6 x 31.7 x 12.7 cm)

Weight 16 lbs (7.3 kg)

Electrical* 120 V~, 60 Hz

*Other voltages available upon request.

Orbit™ LS Low Speed Shaker

The Orbit™LSLow Speed Shaker is a high quality, general purpose shaker with economical analog control. Styled after the other models in the line, the Orbit™ LS features a streamlined, compact design with easy-access control panel. Electronic controls are utilized for setting speed and time. The knobs used for selecting parameters turn easily and are clearly marked with corresponding values.

A large orbit and low speed make the Orbit™ LS useful for staining and destaining gels, washing blots and general mixing. The shaker is supplied with a 30 x 30 cm stainles steel flat platform and non-slip rubber mat to keep plates, dishes and other sample containers in place.

Specifications Orbit™ LS Low Speed Shaker

Speed Range 3 - 60 rpm

Timer 20 - 120 min (10 min inc.) or continuous

Motion Circular, 19 mm

Maximum Load 11 lbs (5 kg)

Ambient Operating Range +4° to 70°C

Dimensions (W x D x H) 10" x 12.6" x 6.3" (25.5 x 32 x 16 cm)

Weight 14.5 lbs (6.6 kg)

Electrical 120 V~, 60 Hz or 230 V~, 50 Hz

GyroTwister™ GX-1000 3-D Shaker

The three dimensional shaking motion of the GyroTwister™ GX-1000 is extremely efficient, yet gentle, making this shaker ideal for general mixing as well as staining gels, hybridization and other applications. Shaking speed is continuously adjustable across a broad range. A nonslip rubber mat and elastic tie-downs hold samples in place during operation. A dimpled mat is included for holding tubes in place. Larger platforms and a stacked standard platform configuration are available to increase shaker capacity.

Permanently lubricated ball bearings on moving parts provide quiet, maintenance-free operation. The sturdy base lends stability to the unit. The GyroTwister™ is safe for use in temperature controlled environments, up to 65°C. Standard 30 x 30 cm platform and tube mat are supplied with the shaker.

LAB-S2030-LS Orbit™ LS Low Speed Orbital Shaker W/ Flat Platform

LAB-S2031-12D Stacked Double Flat Platform W/ Rubber Mat

LAB-S1000 GyroTwister™ GX-1000 3D Shaker W/ 30 x 30 cm Nonslip Platform & Dimpled Tube Mat

LAB-S1000-30

Stacking Platform, 30 x 30 cm, W/ Hardware

LAB-S1000-40

Large Platform 40 x 40 cm, W/ Nonslip Rubber Mat

LAB-S1000-50

Extra Large Platform, 50 x 50 cm, W/ Nonslip Rubber Mat

LAB-S1000-M

Dimpled Mat, 30 x 30 cm, For Holding Tubes

LAB-S1000-A

GyroTwister™ GX-1000 3D Shaker W/ 30 x 30 cm Nonslip Platform & Dimpled Tube Mat, Adjustable Tilt Angle

Specifications GyroTwister™ GX-1000 3-D Shaker

Speed Range 6 - 60 rpm

Timer 0 to 180 minutes or continuous

Motion Three dimensional, fixed ± 7° pitch

Maximum Load 11 lbs (5 kg)

Ambient Operating Range +4° to 65°C

Dimensions (W x D x H) 13" x 13.9" x 8.3" (33 x 35 x 21 cm)

Weight 14.3 lbs (6.6 kg)

Electrical* 120 V~, 60 Hz

*Other voltages available upon request.

PW Analytical Balances

Ideal for Pharmaceutical & Laboratory Work

Features

•16+ weighing units (including one custom unit)

• Selectable digital filtering for animal / dynamic weighing

• Adjustable filters

• Simple user-friendly operation

• Full range tare

• Zero tracking

• Date and time

• Multilingual display

• Large backlit display with dual text prompts

• Capacity tracker

• Large stainless steel pan

• Force restoration mechanism

• Solid metal housing

• Non-slip adjustable leveling feet

• Lock down mounting slot for Kensington™ type lock and cable

• Dual tare keys

• Color coded, sealed keypad

• Splashproof to protect from accidental spills

• RS-232 bi-directional interface

• GLP print outs

3 Year Warranty!

PGW Precision Balances

3 Year Warranty!

Applications

The PW Analytical Balances are ideal for weighing, net/total, check weighing, percentage weighing, weight accumulation, parts counting, animal / dynamic weighing, density determination and below pan weighing.

Features

•18+ weighing units (including one custom unit)

•Selectable digital filtering for animal / dynamic weighing

•Adjustable filters

•User friendly

•Full range tare

•Zero tracking

•Date and time

•Multilingual display

•Large backlit display with dual text prompts

•Capacity tracker

•Large stainless steel pan

•Modern low profile design

•Force restoration mechanism

•Solid metal housing

•Non-slip adjustable leveling feet

•Lock down mounting slot for Kensington™ type lock

• Internal calibration

• External calibration

• AC adapter

•Color coded, sealed keypad

•Dual tare keys

•Splashproof to protect from accidental spills

•Windshield supplied as standard with models with 0.001g readability

•RS-232 bi-directional interface

•GLP print outs

•External calibration

•Internal calibration optional

•AC adapter

AD-8036

Anti-Vibration Table

AD-7995

Below Balance Hanger

AD-9028 RS-232 Cable

AD-9061

AdamDU - Data Collection Program

AD-9066 USB To RS-232 Interface Cable

PGL Precision Balances

Great for material testing applications and laboratory. Ideal for field applications with a battery!

3 Year Warranty!

Features

•9 weighing units

•Date and time

•Full range tare

•Zero tracking

•Multilingual display

•Large backlit display with dual text prompts

•Capacity tracker

•Large stainless steel pan

•Solid metal housing

•Overload protection

•Lock down mounting slot for Kensington™ type lock and cable

•Non-slip adjustable leveling feet

•Color coded, sealed keypad

•Dual tare keys

•Windshield supplied as standard with models with 0.001 g readability

•Modern low profile design

•RS-232 bi-directional interface

•GLP print outs

•External calibration

•Rechargeable battery

•AC adapter

•Auto sleep / power down function to save battery life

Applications

PGL Precision Balances are ideal for weighing, parts counting, percentage weighing, check weighing, density determination and below pan weigh.

Highland™ Portable Precision Balances

Ideal for quick readings in the laboratory, university and field work!

2 Year Warranty!

Features

•15 weighing units

•Zero tracking

•Backlit LCD display

•Capacity tracker

•ShockProtect™ overload three - point protection

•Can be stacked for storage (120 mm pan size only)

•Lock down mounting slot for Kensington™ type lock

•Removable anti-static draft shield (120 mm pan size only)

•Stainless steel pan

Applications

•Non-slip adjustable leveling feet

•Below balance weighing with hanger

•Easy access to the rechargeable battery

•Color coded, sealed keypad

•Dual tare keys

•RS-232 and USB interface

•Handical™ manual internal calibration with built-in mass

•External calibration

•Auto power off

•Full range tare

•Low battery indication

•AC adapter

Highland™ Portable Precision Balances are ideal for weighing, percentage weighing, parts counting, below pan weighing and weight accumulation.

LBK Weighing Scales

Applications LBK Weighing Scales are ideal for weighing, parts counting and percentage weighing.

Features

•5 weigh ing units (kg, g, lb, oz, lbs:oz)

•Full range tare

•Zero tracking

•Simple user-friendly operation

•Large backlit LCD display

•Non-slip adjustable leveling feet

•Overload protection

•Color coded, sealed keypad

•Large stainless steel pan

•Modern low profile design

•Precision load cell technology

•Splashproof to protect from accidental spills

•External calibration

•Rechargeable battery up to 150 hours operation

CPWplus Bench Scales

Ideal for shipping / receiving, materials and sample testing in the field!

1 Year Warranty!

•Auto sleep / power down function to save battery life

•Low battery indication

•AC adapter

1 Year Warranty!

Applications

CPWplus Bench Scales are ideal for weighing and animal / dynamic weighing.

CBCa Bench Counting Scales

Features

•Internal counting resolution 1:400,000

•Preset tare function

•Full range tare

•Zero tracking

•Memory accumulation

•Adjustable filters

•Pre-set counting with alarm

•Date and time

•Large backlit LCD display

•Simple user-friendly operation

•Precision load cell technology

•Splashproof to protect from accidental spills

•Full color coded keypad with numeric entry

•Large stainless steel pan

•Non-slip adjustable feet

•Overload protection

•Easy access to the rechargeable battery

•RS-232 bi-directional interface

•External calibration

•Rechargeable battery up to 90 hours operation

•Auto sleep / power down function to save battery life

Features

• 4 weighing units (kg, g, lb, oz)

• Simple 4 button operation

• Hold function

• Full range tare

• Zero tracking

• Large backlit LCD display

• Wall mount bracket

• Large stainless steel pan

• Modern low profile design

• Splashproof to protect from accidental spills

• Precision load cell technology

• Color coded, sealed keypad

• RS-232 bi-directional interface

• Low battery indication

• Auto sleep / power down function to save battery life

• Battery power (6 x "AA"batteries)

• AC adapter

•Low battery indication

•AC adapter

2 Year Warranty!

CBCa Bench Counting Scales are ideal for weighing, weight accumulation, parts counting check counting and for count accumulation. AD-CBC8A

AD-CBC100A

Accessories

AD-5006 In-Use Cover

AD-5006-10 In-Use Cover, 10/Pack

CBK Bench Scales

2 Year Warranty!

Features

•5 weighing units (kg, g, lb, oz, lbs:oz)

•Adjustable filters

•Memory accumulation

•Date and time

•Full range tare

•Pre-set weighing with alarm

•Check-weighing with low and high limits

•Check weighing LED bar graph

•Large backlit LCD display

•Capacity tracker

•Non-slip adjustable leveling feet

•Overload protection

•Large stainless steel pan

•Color coded, sealed keypad

CPWplus P Bench Scales

•Full color coded keypad with numeric entry

•Simple user-friendly operation

•Splashproof to protect from accidental spills

•Precision load cell technology

•Internal counting resolution 1:400,000

•Easy access to the rechargeable battery

•RS-232 bi-directional interface

•External calibration

•Rechargeable battery up to 90 hours operation

•Auto sleep / power down function to save battery life

•Low battery indication

•AC adapter

Ideal for Shipping / Receiving, Materials & Sample Testing in the Field!

Features

• Large backlit LCD display

• Simple 4 button operation

• Hold function

• Full range tare

• Zero tracking

• Wall mount bracket

• Large stainless steel platform

• Modern low profile design

• Splashproof to protect from accidental spills

• Precision load cell technology

• Color coded, sealed keypad

• Pillar display standard on P versions

• RS-232 bi-directional interface

• External calibration

• Low battery indication

• Battery power (6 x AA batteries)

• Auto sleep / power down function to save battery life

• AC adapter

1 Year Warranty!

AD-CPWPLUS75P

AD-CPWPLUS150P

CPWplus W Weighing Scales

Features

• 4 weighing units (kg, g, lb, oz)

• Hold function

• Full range tare

• Zero tracking

• Simple 4 button operation

• External calibration

• Large backlit LCD display

• Large stainless steel platform

• Handlebar frame and wheeled base for mobility

• Splashproof to protect from accidental spills

• Non-slip adjustable leveling feet

• Four load cell construction

• Color coded keys

• Modern low profile design

• RS-232 bi-directional interface

• Rechargeable battery

• Auto sleep / power down function to save battery life

• Low battery indication

PMB Moisture Analyzers

Features

•Built-in memories for storing products and settings

•3 settings for heating samples

•Automatic test start setting for when the lid is closed

•Date and time

•Full range tare

•Zero tracking

•Quick and easy to configure through the keypad

•Multilingual display

•Large backlit display with dual text prompts

•Capacity tracker

•Non-slip adjustable leveling feet

•Color coded, sealed keypad

•Large stainless steel pan

•Lock down mounting slot for Kensington™ type lock and cable

•Overload protection

•Precision load cell technology

•Splashproof to protect from accidental spills

•Spirit level

•Single halogen lamp 400 W

•RS-232 and USB interface

•GLP print outs

•Calibration facilities for temperature and weight

• Power Cord

• Pan lifter to easily remove samples

Ideal for Shipping / Receiving, Materials & Sample Testing in the Field!

1 Year Warranty!

AD-CPWPLUS35W CPWplus W Weighing Scale, Capacity: 75 lbs / 35 kg, Readability: 0.02 lbs / 10 g, Pan Size: 19.7" x 19.7" / 500 mm x 500 mm AD-CPWPLUS75W CPWplus W Weighing Scale, Capacity: 165 lbs / 75 kg, Readability: 0.05 lbs / 20 g, Pan Size: 19.7" x 19.7" / 500 mm x 500 mm AD-CPWPLUS150W CPWplus W Weighing Scale, Capacity: 330 lbs / 150 kg, Readability: 0.1 lbs / 50 g, Pan Size: 19.7" x 19.7" / 500 mm x 500 mm AD-CPWPLUS200W CPWplus W Weighing Scale, Capacity: 440 lbs / 200 kg, Readability: 0.1 lbs / 50 g, Pan Size: 19.7" x 19.7" / 500 mm x 500 mm

Application PMB Moisture Analyzers are ideal for moisture determination.

AD-PMB53

Accessories

AD-9028

RS-232 Cable

AD-9304

USB Cable

AD-8023

Adam Printer

AD-7996

Digital Moisture Balance

The Digital Moisture Balance is specifically designed to be used in a production environment by non-technical personnel. Can be successfully used in the laboratory and in the production area where test results are needed on the spot. With its RS-232 interface capability, the custom printer will print a hard copy of the test data with a time and date stamp, confirmation of the test parameters used, and a message of ‘operator interrupt’ should a test be stopped prematurely. All accomplished automatically; load a sample, press a button and walk away. Rapid, no hassle results in just minutes.

Features

•Flexibility

Simplifies sample preparation and loading, no limitations on sample size (0-100 g), measures moisture or solids from 0.0% to 100.0%

•Versatile

Allows fine tuning to individual testing needs with multiple testing modes, wide selection of heat settings and readout in either solids or moisture

•Accuracy

Increases precision and is adaptable to critical moisture and solids testing. Readable to 0.1% moisture and solids

•Durability

Withstands the hard knocks of day-to-day use with rugged cast aluminum construction and enclosed sample chamber

Applications

The Digital Moisture Balance is ideal for use of snack foods, dairy products, cereals, grains and baked goods, sand, cement, ceramics, gypsum, fiberboard, adhesives, pharmaceuticals,chemicals, sludge and slurries.

Cenco Mechanical Moisture Balance

The Cenco Mechanical Moisture Balance has become world renowned for fast and accurate readings of the percent moisture content in a variety of substances. The wide selection of heat ranges allows optimum drying of diverse materials without sample damage. The Mechanical Moisture Balance eliminates error while providing direct readings of moisture content. There is no calculation or special training needed to use this dependable equipment.

The Mechanical Moisture Balance is the best cost performance moisture measurement method for most materials. Its portability makes it convenient to be used in the lab, on the production line or even in the field. The Mechanical Moisture Balance rapidly determines the percentage moisture of materials ranging from food products to chemicals, plastics, and ceramics!

Features

• Direct % Reading

No calculation needed

No special training needed

• Efficient

Simultaneous weighing & drying - saves time

• Flexibility

Wide selection of heat ranges allows optimum drying of diverse materials without sample damage

• Versatility

Allows fine tuning to individual testing needs. Multiple testing modes and temperature settings

• Accuracy

Increases precision and is adaptable to critical moisture and solids testing. Readable to 0.1% moisture and solids

CS-26900EMB Digital Moisture Balance (110 V)

CS-26900EMB Digital Moisture Balance (110 V)

Recommended for Quality Assurance!

Bostwick Consistometer

The Bostwick Consistometer is the preferred choice for measuring consistency, flow rate and viscosity in a variety of products. You can use the Bostwick on any viscous material like sauces, salad dressings, paints, chemicals or cosmetics where you want to measure the distance a material flows in a given time interval. The Bostwick complies to Mill Spec R81294D and ASTM F1080-93 and is made of stainless steel construction.

Features

• Durable

Stainless Steel Construction, resists corrosion, suitable for laboratory and plant use

• Convenient Size

Uses little bench space, requires only 75 mL of sample 14"L x 3 1/2"W x 5 1/2"H

• Spring Loading Gate

Instantaneous gate release, prevents premature flowing of sample

Precision & Interfacial DuNouy Tensiometer

• Reproductivity

2 leveling screws and spirit levels, precise positioning of flow angle

• Precision

Engraved graduations of 0.5 cm divisions, assures accurate results, wear & smear resistant

Uses

• Food Processing

Tomato sauces + others, preserves, fillings, soups, baby foods, salad dressings & suggested by USDA

• Manufacturing

Epoxy removers, polyurethane paint, adhesives, coatings & mil spec

R-81294B

• Cosmetics Formulations

Lotions, shampoos & flow base creams

• Chemical Production

Selected solvents, viscous liquids, slurries & emulsions

CS-24925000

Bostwick Consistometer

Features

• Rapid Measurement

Ring method allows readings to be made in 15-30 seconds (Ideal for colloidal suspensions which exhibit rapid changes in surface tension)

• Direct Reading

Circular scale is graduated in dynes/cm eliminating the need for mathematical calculations

• Reproducible Results

Improved technique allows accurate readings to be reproduced within ±0.05 dyne/cm

• Portability

Compact unit comes with carrying case for easy transport

• Stability

Unit is mounted on a cast tripod support with convenient leveling screws

Measure surface tension and interfacial tension quickly and accurately in oils, detergents, serums, colloidal suspensions, chromium solutions, etc. to better control your process and your product quality. The DuNouy Tensiometer is easy-to-use, accurate, portable and gives surface tension results reproducible to within ± 0.05 dyne/cm.

• Precision DuNouy Tensiometer (upward direction)

This model tensiometer provides precise readings of upward interfacial and surface tensions by the ring method to values reproducible within +/0.05 dyne/cm. This instrument is specified for determining interfacial tension of oil against water by the ring method in ASTM Method D971 and solutions of surface-active agents in ASTM Method D1331. It is also specified for testing synthetic rubber lattices in ASTM D1417 and determining the surface tension of industrial water and industrial wastewater in ASTM Method D1590.

• Interfacial DuNouy Tensiometer (dual direction)

Where the Precision Tesiometer measures only the upward pull on the ring, the Interfacial Tensiometer is designed to measure both upward and downward forces on the ring. Graduated dial reads in both directions from

CS-70535000

Precision DuNouy Tensiometer

CS-70545000

Interfacial DuNouy Tensiometer

zero and a double vernier is provided. The two scales and corresponding verniers have graduations and figures of different colors to indicate whether the measured force is upward or downward.

• Both instruments can be quickly adjusted and calibrated. They are supplied completely assembled and are furnished with three extra torsion wires, a 6 cm platinum-iridium ring and carrying case.

Quality surface tension testing and the DuNouy Tensiometer has become an indispensable asset to a variety of industries including paints, coatings and inks; chrome, nickel, and brass plating; soap; surfactants; emulsions; crude and transformer oils and many more. The CSC DuNouy Tensiometer is also being used in many universities and technical centers as an important instrument for scientific studies.

The DuNouy Tensiometer is available in two models

Sieves

Mesh Certified Test Sieves (MCTS) 3", 8" Brass Frame & Stainless Steel Mesh

The Mesh Certified Test Sieves include a serial number that ties down the traceability to each sieve. One of the special benefits of the sieve construction is a fillet. The fillet covers the solder connection between the mesh to the frame. This keeps particles from being caught in the crevices and makes cleaning easier.

Supplied with Certificate of Compliance.

Inspection Certificate states the average aperture values.

Full traceability is achieved with an individual serial number on each sieve. They meet ASTM - E11, BS, and ISO Standards.

Also Available In:

12", 18", 100 mm, 200 mm, 300 mm & 450 mm Diameter Frame

Stainless Steel Frames

Both Certified & Mid-Point Seives Are Also Available In Half-Height Frame Depth Other Mesh Sizes Are Available, Along With Receiving Pans & Lids

Opening

Many Different Options to Choose From

Also available:

Mid-Point Sieves

A Mid-Point Sieve has had the mesh inspected. The sieve is then selected as a mid-point if the results give tolerances that are in the middle of the ASTM Standard. One of the special benefits of the sieve construction is a fillet. The fillet covers the solder connection between the the mesh to the frame. This keeps particles from being caught in the crevices and makes cleaning easier.

Used for everyday testing of supercritical processes. When a process requires a high level of repeatability, Mid-Point Sieves can be used on all sieve tests. However, the predominant application for the Mid-Point Sieves is master stacks. A master stack is used to check and recalibrate sieves used in everyday testing.

Working Sieves

Working Sieves do not require special inspection but need to conform to the basic standards of ASTM E-11. The Working Sieves are available in brass frames with brass or stainless steel mesh. We also supply stainless steel frames with stainless steel mesh. Working Sieves are available with 8" and 12" diameter frames. The frames are full height and one half height depths. These sieves are constructed using ASTM standard wire cloth (mesh) and are supplied with a Certificate of Conformance. The mesh has not been individually inspected. Each sieve has a serial number which is related to a lot number.

Working Sieves are used in a diverse range of industries that include construction, mining, food, soil testing and pharmaceuticals. They can be checked against master stacks, master samples or calibration spheres (beads) to test for wear or mesh damage.

Calibration Samples Also Available

EFL 2000/2 Sieve Shaker

The EFL 2000/2 is a rugged no nonsense shaker ideal for on-site and heavy-duty applications. It is equipped with a dynamic power source to ensure the sieves and sample are provided the right vibration for fast, accurate, and reproducible tests, time after time. Vertical movement is fixed to ensure samples spend a maximum amount of time seeking apertures, instead of being suspended mid-air.

Applications

The EFL 2000/2 is perfect for use in the field or in the production area.

Features

•Rugged

Designed specifically for large, cumbersome samples like concrete, rock, sand and asphalt

Meinzer II Sieve Shaker

The Meinzer II Sieve Shaker separates different size components in ground, granular or particulate mixtures by rapid machine sieving. The newly developed clamping system is very easy to use. The Meinzer II accepts up to 10 full-height 8" sieves or 21 half-height sieves, plus a lid and receiver.

Applications

The Meinzer II is ideal for use on aggregates, cements, chemicals, pharmaceuticals, cosmetics, grains, seeds, coal, soils, tobacco blends, or any dry material requiring size analysis.

Features

•Quiet Operation

Acceptable noise level for the plant or lab

•Compact Size

Only 10" diameter footprint

•Two Way Sieving Action

Simultaneous vertical and horizontal motion

•Easy to Use

60 minute timer and unique clamping system allows user to set up sieve tests in seconds

•Maintenance-Free

Non-corrodible, non-metallic springs, and a durable motor offers maintenance free testing

•Flexibility

Low noise level makes shaker ideal for onsite, production, and laboratory testing

•Capacity

8" Sieves - 12 full height or 24 half height

12" Sieves - 6 full height or 12 half height

Powermatic Sieve Shaker

The Powermatic Sieve Shaker is rugged nononsense shaker, ideal for heavy-duty applications. It is equipped with two maintenance free sealed motors to transmit the exact vibrations and movement to the sample for optimum performance. The low voltage removable control unit allows the unit to be controlled from a bench wall, or other convenient locations.

Applications

The Powermatic is perfect for use in the field or production area.

Features

•Quiet

Virtually silent in operation, ideal for on-site, production, or lab testing

•Built-In Timer

Adjustable 60 minute timer with automatic shutoff

•Portable

Light-weight, 36 lbs

•Maintenance-Free

No internal moving parts

CS-18480100

Meinzer II Sieve Shaker (110 V)

•Maintenance-Free

Two sealed motors offset at strategic angles transmitting the exact vibration frequency and movement for optimum performance

•Easy to Use

60-minute timer and uniquely designed clamping system allows user to change sieve stacks in seconds

•Flexibility

Detachable control unit for convenient use Now available: Screening sieves for continuous small scale screening operations

•Capacity

18"Sieves - 5 full height sieves

CS-18490012 EFL 2000/2 Sieve Shaker

CS-18490018 Powermatic Sieve Shaker

Octagon 2000 Sieve Shaker

The Octagon 2000 Sieve Shaker provides precise particle size analysis, all within safe and acceptable sound limits. Digital controls –time, vibration, and amplitude - allow you to duplicate test results from your current shaker with ease, from 3" to 20 um. The unit is powered by an electromagnetic drive that has no rotating parts, eliminating maintenance and virtually all noise. The rapid vertical and side to side motion created prevents apertures from blinding and offers accurate, repeatable results test after test.

Applications

The Octagon 2000 Sieve Shaker provides precise particle size analysis for laboratory or on-site use.

Features

•Whisper-Quiet

Ideal noise level for use in the plant, lab, or even at your desk

5510 Ultrasonic Cleaner

• Maintenance-Free

Powered by electromagnets, offering no moving parts to replace

•Easy to Use

Digital controller allows user to control time, amplitude and continuous or intermittent vibrations

•Flexibility

Uniquely designed clamping system allows user to change sieve stacks in seconds

•Capacity

3"Sieves - 12 full height or 24 half height

8"Sieves - 8 full height or 18 half height

•Accurate

Exacting horizontal and vertical sieving motion created offers paicles maximum time seeking apertures

CS-18490000 Octagon 2000 Sieve Shaker

Cleaning your sieves using the 5510 Ultrasonic is a faster, more thorough, and safer method than any other. Tiny, microscopic bubbles are created by ultrasonic sound waves that move through a specially formulated cleaning solution, removing the most stubborn dirt and contaminates. A builtin heater and degas feature help the whole process work even better. The 5510 Ultrasonic Cleaner makes a scrubbing action powerful enough to eliminate blinding and thoroughly clean your sieves.

Features

•Fast

Cleans sieves in less than 5 minutes

•Affordable

Save money by extending the lifetime of your sieves

•Safe

Removes the toughest grime without damaging expensive sieves

•Capacity

1 - full height 8" sieve

2 - half height sieves

An Item Worth Having!

Sieve Cleaning Brushes

Sieve cleaning brushes are ideal to keep your sieves working optimally. They are simple to use and are shaped to make cleaning fast and spotless.

CS-1810000NB

Nylon Sieve Brush

CS-1810000BB

Brass Sieve Brush

CS-1810000B

Nylon Sieve Brush Double Ended

CS-18510000 5510 Ultrasonic Cleaner

Accessories

CS-18510001

Tray For 5510 Ultrasonic Cleaner

CS-1851000260

Cleaning Solution For 5510 Ultrasonic Cleaner

CS-18510003

Cover For 5510 Ultrasonic Cleaner

Scienceware® "SPACE SAVER" Vacuum Desiccators

LARGE INTERIOR VOLUME

The space saving design of the desiccator dome provides maximum interior clearances. They offer an average of 13% greater interior volume than standard hemispherical domes.

EXTRA HEAVY WALLS

Clear polycarbonate top and choice of white polypropylene or polycarbonate bottom. This strong, shatterproof desiccator will hold a full vacuum (29.9" Hg 759 mm) at room temperature for 24 hours and will remain airtight even if not under vacuum. Use at room temperature only.

Features

•A polypropylene stopcock with a Teflon® TFE plug which turns, allowing a slow, gentle entrance of air, preventing unnecessary

Secador® Auto-Desiccator Cabinets

Protecting valuable humidity sensitive items such as reagents or electronics is easy and totally automatic with Secador® Auto-Desiccator Cabinets. A patented electronic dehumidification system is designed to reduce the relative humidity inside the cabinet from 75 to 25% and circulate dry air automatically, freeing users from monitoring or changing chemical desiccant. All contents are easily viewed through a large clear door that seals with positive latches and can be secured closed with tamper evident seals or padlock. A dial hygrometer in the door allows for easy monitoring of relative humidity.

Secador® 3.0 AutoDesiccator Cabinets

The built-in Auto-Desiccator module regenerates desiccant and circulates dry air to assure safe storage of moisture sensitive products.

The Secador® 3.0 Auto-Desiccator Cabinet has 1.58 cu. ft internal volume with overall dimensions of 41.7 H x 34. 1 W x 41.4 cm D (16.4" H x 13.4" W x 16.3" D). Three perforated shelves can be removed for different contents. The door opening is 31.2 H x 22.5 cm W (12.3" H x 8.9" W) and includes 2 latches and loops for lock or tamper evident seal. Includes three shelves.

Shipping weight 10 kg (22 lbs).

turbulence and crucible damage. The stopcock handle is a highly visible red and has a port which accepts 6.4 mm (1/4") I.D. tubing.

•A large ribbed knob at the top center for easy lifting.

•A neoprene O-ring seal which does not require grease, but is not harmed if grease is used.

•A polypropylene plate 3.2 mm (1/8") thick with 3.2 mm (1/8") diameter perforations for air transfer. The plate rests on the retaining ledge of the bottom section and has a center hole for easy removal.

•Choice of bottom section: Polypropylene provides excellent chemical resistance and permits the use of incandescent crucibles with standard size porcelain plates. All-clear polycarbonate bottoms are available in the same sizes.

Dry-Keeper™

Desiccator vertical cabinet

Non-vacuum with dial hygrometer in door

Made of methyl-methacrylate, this desiccator cabinet provides a clear view of contents. Shelf cleats permit 15 height adjustments. Includes three shelves with vent holes and three sets of shelf rails. The gasketed door has two metal hinges, two door latches and a metal handle. A desiccant tray is also included. The door opening is 25 x 45 cm (10" x 17 7/8").

Secador® 4.0

Includes three shelves

The built-in Auto-Desiccator module regenerates desiccant and circulates dry air to assure safe storage of moisture sensitive products. The Secador® 4.0 Auto-Desiccator Cabinet has 1.9 cu. ft internal volume with overall dimensions of 51.8 H x 34.1 W x 41.4 cm D (20.4" H x 13.4" W x 16.3" D). Three perforated shelves can be removed for different contents. The door opening is 41.7 H x 22.5 cm W (16.4" H x 8.9" W)and includes 2 latches and loops for lock or tamper evident seal. Shipping weight 10.9 kg (23.9 lbs).

Colony Counter System

BEL-F42074-1115

Secador® 4.0 Clear, 120 V AC

BEL-F42074-1116

Secador® 4.0 Clear / Blue End Caps, 120 V AC (Not Shown)

BEL-F42074-1117

Secador® 4.0 Blue / Clear Door, 120 V AC (Not Shown)

BEL-F42074-1220

Secador® 4.0 Clear, 230 V AC

BEL-F42074-1226

Secador® 4.0 Clear / Blue End Caps, 230 V AC (Not Shown)

BEL-F42074-1227

Secador® 4.0 Blue / Clear Door, 230 V AC (Not Shown)

Hand Held Electronic Colony Counter

Smallest, Most Economical Unit Available!

This system combines the pen-style colony counter (BEL-F37862-0000), the minimagnifier (BEL-F37865-0000), the mini light box II (BEL-F37864-2000) with an AC line current adapter (BEL-H37864-0301) and a counting grid (BEL-F37864-0100). Available as a system or each item may be purchased separately.

BEL-F37863-2000

In a single motion this colony counter marks, counts and confirms with a beep. The lightweight 42.5 gm (1.2 oz) pen-style colony counter features a four-digit LED display that shows cumulative count. A selector switch allows for counting up or down to correct errors, or to check the count by counting backwards. Powered by a 3 V battery. The long life felt-tip marker works on plastic or glass and is oil and water resistant, but ink is removable with ethyl alcohol. Comes with red and black markers. Dimensions: 152.4 x 19 x 19 mm (6" x 3/4" x 3/4").

BEL-F37862-0000

Colony Counter

BEL-H37862-0100

Replacement Black Tip

BEL-H37862-0150

Replacement Red Tip

BEL-F37862-0200

Replacement 3 V Battery

Features

•High accuracy and precision guaranteed

•Autoclavable tip cone and lower section assembly

•Streamlined tip ejector designed for access to narrow-necked tubes and containers

•Ergonomic, lightweight and soft plunger movement provides added comfort and minimizes fatigue

•Two step plunger operation allows you to use both forward and reverse pipetting techniques depending on the nature of the liquid

•Color coded for easy identification

Diamond Pro

Diamond Pipettors

Diamond Pipettors are a cost-effective alternative to high priced name-brand pipettors. Manufactured for high accuracy and precision, the Diamond pipettors come with a certificate of calibration, a recalibration tool kit and a full one year warranty. They are calibrated in an ISO 17025 facility.

Adjustable Volume with Tip Ejector

GS-3301-10

Diamond Pipettor, Volume: 0.5 - 10 µl, Color: Pink, Pipette Tip No.: 3305

GS-3301-20

Diamond Pipettor,

Volume: 2 - 20 µl, Color: Pink, Pipette Tip No.: 3305

GS-3301-50

Diamond Pipettor,

Volume: 5 - 50 µl, Color: Yellow, Pipette Tip No.: 3306

GS-3301-100

Diamond Pipettor, Volume: 10 - 100 µl, Color: Blue, Pipette Tip No.: 3306

GS-3301-200

Diamond Pipettor, Volume: 20 - 200 µl, Color: Lavender, Pipette Tip No.: 3306

GS-3301-1000

Diamond Pipettor, Volume: 100 - 1000 µl, Color: Orange, Pipette Tip No.: 3307

GS-3301-5000

Diamond Pipettor, Volume: 1000 - 5000 µl, Color: Green, Pipette Tip No.: 3308B

Fixed Volume with Tip Ejector

GS-3302-5

Diamond Pipettor, Volume: 5 µl, Color: Pink, Pipette Tip No.: 3306

GS-3302-10

Diamond Pipettor, Volume: 10 µl, Color: Pink, Pipette Tip No.: 3306

GS-3302-15

Diamond Pipettor, Volume: 15 µl, Color: Pink, Pipette Tip No.: 3306

GS-3302-20

Diamond Pipettor, Volume: 20 µl, Color: Yellow, Pipette Tip No.: 3306

The Diamond Pro research pipettor includes all of the features of the Diamond pipettor with the addition of a super-soft elastomer grip that minimizes fatigue of hands and fingers. The unique padding not only reduces thumb stress, but also minimizes the transfer of body heat to the pipette, resulting in consistent accuracy.

All Diamond pipettors come with a certificate of calibration, a recalibration tool kit and full one year warranty. They are calibrated in an ISO 17025 facility.

Adjustable Volume with Tip Ejector

GS-3311-10

Diamond Pro Pipettor,

Volume: 0.5 - 10 µl, Color: Red, Pipette Tip No.: 3305

GS-3311-20

Diamond Pro Pipettor,

Volume: 2 - 20 µl, Color: Red, Pipette Tip No.: 3305

GS-3311-50

Diamond Pro Pipettor,

Volume: 5 - 50 µl, Color: Yellow, Pipette Tip No.: 3306

GS-3311-100

Diamond Pro Pipettor,

Volume: 10 - 100 µl, Color: Blue, Pipette Tip No.: 3306

GS-3311-200

Diamond Pro Pipettor,

Volume: 20 - 200 µl, Color: Lavender, Pipette Tip No.: 3306

GS-3311-1000

Diamond Pro Pipettor,

Volume: 100 - 1000 µl, Color: Orange, Pipette Tip No.: 3307

GS-3311-5000

Diamond Pro Pipettor,

Volume: 1000 - 5000 µl, Color: Green, Pipette Tip No.: 3308B

Fixed Volume with Tip Ejector

GS-3312-5

Diamond Pro Pipettor, Volume: 5 µl, Color: Red, Pipette Tip No.: 3306

GS-3312-10

Diamond Pro Pipettor, Volume: 10 µl, Color: Red, Pipette Tip No.: 3306

GS-3312-15

Diamond Pro Pipettor, Volume: 15 µl, Color: Red, Pipette Tip No.: 3306

GS-3312-20

Diamond Pro Pipettor, Volume: 20 µl, Color: Yellow, Pipette Tip No.: 3306

GS-3312-25

Diamond Pro Pipettor, Volume: 25 µl, Color: Yellow, Pipette Tip No.: 3306

GS-3312-50

Diamond Pro Pipettor, Volume: 50 µl, Color: Blue, Pipette Tip No.: 3306

GS-3312-100

Diamond Pro Pipettor, Volume: 100 µl, Color: Lavender, Pipette Tip No.: 3306

GS-3312-200

Diamond Pro Pipettor, Volume: 200 µl, Color: Lavender, Pipette Tip No.: 3306

GS-3312-250

Diamond Pro Pipettor, Volume: 250 µl, Color: Orange, Pipette Tip No.: 3307

GS-3302-25

Diamond Pipettor, Volume: 25 µl, Color: Yellow, Pipette Tip No.: 3306

GS-3302-30

Diamond Pipettor, Volume: 30 µl, Color: Yellow, Pipette Tip No.: 3306

GS-3302-40

Diamond Pipettor, Volume: 40 µl, Color: Blue, Pipette Tip No.: 3306

GS-3302-50

Diamond Pipettor, Volume: 50 µl, Color: Blue, Pipette Tip No.: 3306

GS-3302-100

Diamond Pipettor, Volume: 100 µl, Color: Lavender, Pipette Tip No.: 3306

GS-3302-200

Diamond Pipettor,

Volume: 200 µl, Color: Lavender, Pipette Tip No.: 3306

GS-3302-250

Diamond Pipettor,

Volume: 250 µl, Color: Orange, Pipette Tip No.: 3307

GS-3302-500

Diamond Pipettor,

Volume: 500 µl, Color: Orange, Pipette Tip No.: 3307

GS-3302-1000

Diamond Pipettor, Volume: 1000 µl, Color: Green, Pipette Tip No.: 3307

GS-3302-2000

Diamond Pipettor, Volume: 2000 µl, Color: Green, Pipette Tip No.: 3308B

GS-3302-3000

Diamond Pipettor, Volume: 3000 µl, Color: Green, Pipette Tip No.: 3308B

GS-3302-5000

Diamond Pipettor, Volume: 5000 µl, Color: Green, Pipette Tip No.: 3308B

GS-3312-500

Diamond Pro Pipettor, Volume: 500 µl, Color: Orange, Pipette Tip No.: 3307

GS-3312-1000

Diamond Pro Pipettor, Volume: 1000 µl, Color: Green, Pipette Tip No.: 3307

GS-3312-2000

Diamond Pro Pipettor, Volume: 2000 µl, Color: Green, Pipette Tip No.: 3308B

GS-3312-5000

Diamond Pro Pipettor, Volume: 5000 µl, Color: Green, Pipette Tip No.: 3308B

Multi-Channel with Tip Ejector

Globe’s 8-channel Diamond PRO pipettors feature a 360° rotating manifold which provides universal right or left hand use. Utilizing our super-soft elastomer grips, fatigue of the hands and fingers is minimized. The unique padding not only reduces thumb stress, but also minimizes the transfer of body heat to the pipette, resulting in consistant accuracy. All Diamond pipettors come with a certificate of calibration, a recalibration tool kit and a full one year warranty.

GS-3303-10

8 Place Multi-Channel Pipettor, Volume: 0.5 - 10 μl, Color: Red

GS-3303-50

8 Place Multi-Channel Pipettor, Volume: 5 - 50 μl, Color: Yellow

GS-3303-300

8 Place Multi-Channel Pipettor, Volume: 30 - 300 μl, Color: Orange

Pipette Tips

Diamond Pipette Tips are molded using premium grade plastic and offer consistent accuracy when used with Diamond pipettors.

Diamond Jr. Pipettors

These fixed volume pipettors are accurate, economical and half the size of a standard pipettor. They are fully autoclavable and are perfect for kits, schools and single use applications where precision pipetting is required.

GS-3322-5

Diamond Jr. Pipettor, Volume: 5 μl, Color: Orange, Pipette Tip No.: 3305

GS-3322-10

Diamond Jr. Pipettor, Volume: 10 μl, Color: Pink, Pipette Tip No.: 3305

GS-3322-20

Diamond Jr. Pipettor, Volume: 20 μl, Color: Green, Pipette Tip No.: 3306

GS-3322-25

Diamond Jr. Pipettor,

Volume: 25 μl, Color: Green, Pipette Tip No.: 3306

GS-3322-35

Diamond Jr. Pipettor, Volume: 35 μl, Color: Blue, Pipette Tip No.: 3306

GS-3322-50

Diamond Jr. Pipettor, Volume: 50 μl, Color: Purple, Pipette Tip No.: 3306

GS-3322-100

Diamond Jr. Pipettor, Volume: 100 μl, Color: Orange, Pipette Tip No.: 3306

RV-Pette™ Repeat Volume Pipettor

The RV-Pette™ Pipette provides accurate and reproducible repetitive pipetting from the single filling of a disposable tip. Use of the RV-Pette™ saves time and reduces the fatigue associated with repetitive pipetting using a standard pipettor. Twenty-nine different volumes between 1 μl and 5000 μl may be dispensed with this pipette. As many as forty-eight pipetting steps may be carried out without refilling the reservoir tip. Samples can be dispensed at intervals as fast as 1 second without compromising accuracy or reproducibility. The slender body of the RVPette™ fits comfortably in the natural contour of your hand. The plunger is located on the top of the unit, like that of a standard pipette, for easy access and reduction of hand strain. The RV-Pette™ performs best when used with Globe’s dispenser syringe tips.

Racks

The Diamond Acrylic Pipettor Stand offers safe and convenient storage for pipettors.

GS-3305

0.1 - 20 μl, Natural, 1000/Pack

GS-3305R

0.1 - 20 μl, Natural, 96/Rack, 10 Racks/Case

GS-3306

1 - 200 μl, Yellow, 1000/Pack

GS-3306R

1 - 200 μl, Yellow, 1000/Rack

GS-3307

100 - 1000 μl, Blue, 1000/Pack

GS-3307R

100 - 1000 μl, Blue, 1000/Rack

GS-3308B

1000 - 5000 μl, Natural, 250/Pack

Features

•Convenient tip selection chart located on the body of the pipette

•Maintenance free

•Use with Globe dispenser syringe tips

•Comes with a certificate of calibration and one year warranty

GS-3250

RV-Pette™ Repeat Volume Pipettor

GS-3310-4

Holds 4 Pipettors

GS-3310-6

Holds 6 Pipettors

Vaccu-Pette/96™ Pipetting Device

The Vaccu-Pette/96™ pipetting device is a 96-channel pipetting device that can aspirate or dispense 96 wells in less than 10 seconds. It speeds up repetitive washing, dispensing or aspirating all wells simultaneously. Simply connect a disposable plastic syringe to the Vaccu Pette/96™ pipetting device and withdraw the plunger to transfer liquid. Use the Vaccu Pette/96™ pipetting device to remove spent medium from cultures in preparation for feeding. Molded of transparent plastics materials, it is 127 x 86 x 37 mm high (5" x 3 3⁄8" x 1 7⁄16") and has a vacuum outlet at one end. A short length of 3.2 mm I.D. (1⁄8") tubing is supplied for syringe connection. Requires a 30 ml or larger disposable sterile syringe (not included).

Individually packed, sterile and disposable.

Disposable Gloves

RONCO SILKTEX

Latex Examination Gloves

5 mil thickness

Features Rapid Release Valve for One-Handed Operation

Designed for fast and efficient single -handed operation with glass or plastic pipettes. Pipettes are easily inserted into a unique collar with stabilizing fingers to hold pipette securely. Rotating the knurled thumb wheel draws liquid to the desired volume. To empty rapidly, apply light pressure to the fast release lever. For gradual dispensing, rotate the thumb wheel. Easily disassembled for cleaning. Sizes are color coded. Sold Individually.

Fast Release Pipette Pump™ II Pipettor, 2 ml, Blue Fast Release Pipette Pump™ II Pipettor, 10 ml, Green Fast Release Pipette Pump™ II Pipettor, 25 ml, Red

A. Transpette™ 8

Channel Transfer Pipettor

Economical and Disposable

Now you can perform plate washing, feeding and supernatant collection with one of the most unique pipetting devices available. The Transpette™ pipettor is an inexpensive, disposable, 8-channel transfer pipettor which can deliver and remove liquids from your microwell plates without the use of pipettors and pipette tips. To avoid radiation contamination of your expensive liquid handling devices, discard the Transpette™ transfer pipettor after "hot" radioactive uses. Molded of translucent plastic, the Transpette™ pipetting device holds 600 μl per channel. Available sterile or non-sterilized. Cannot be autoclaved.

B. Disposable Pipetting Reservoir

The pipetting reservoir has a 100 ml capacity for extended multi-channel pipetting into microwell plates, Mini-Tubes, Scienceware® Cube 2ube® Tubes and deep well blocks. This design allows ample clearance for all types of pipettors.

BEL-F37873-0000

Transpette™ Pipettor, Non-Sterile, 25/Bag

BEL-F37876-0000E

Sterile, Disposable Vaccu-Pette/96™ Pipetting Device, Each BEL-37876-0001E

Autoclavable, Reusable Vaccu-Pette/96™ Pipetting Device, Each

BEL-F37877-0000

Disposable Pipetting Reservoir Bulk Packed, Non-Sterile, 50/Box

BEL-F37877-0001

Individually Packed, Radiation Sterilized, 50/Box

Powder Free

RO-819

SILKTEX, Size X-Small, 100/Box

RO-829

SILKTEX, Size Small, 100/Box

RO-839 SILKTEX, Size Medium, 100/Box

RO-849

SILKTEX, Size Large, 100/Box

RO-859

SILKTEX, Size X-Large, 100/Box "Evaluated & accepted by CFIA"

Lightly Powdered

RO-519

SILKTEX, Size X-Small, 100/Box

RO-529

SILKTEX, Size Small, 100/Box

RO-539

SILKTEX, Size Medium, 100/Box

RO-549

SILKTEX, Size Large, 100/Box

RO-559

SILKTEX, Size X-Large, 100/Box "Evaluated & accepted by CFIA"

Bel-Bulb™ Pipettor

The Bel-Bulb™ Pipettor is a simple suction device with a soft tapered chuck to fit pipettes from 6 to 8 mm in diameter. The flexible vinyl bulb is 5 cm diameter x 7 cm long (2" x 2 3/4"). After filling your pipette, remove the bulb and quickly cover the top of the pipette with a finger to hold fluid or release it as needed.

Transfer Pipettes

General Purpose

These Transfer Pipettes are offered in a variety of sizes and styles. Choose from our standard graduated and non-graduated transfer pipettes, fine tip transfer pipettes, mini transfer pipettes and extra large 12" transfer pipettes. We have the right pipette for your requirements. Produced from flexible polyethylene (PE), these pipettes are perfect for all liquid transfer applications.

Fine Tip Transfer Pipettes

Ideal for dispensing small volumes, loading hemocytometers and transferring liquid to and from multi-well plates.

Standard Pipettes-Graduated

GS-137035-500

3 ml Standard Transfer Pipettes, Graduated To 1 ml, Length: 140 mm, 21 Drops/ml, Non-Sterile, 500/Dispenser Box

GS-137030-500

5 ml Standard Transfer Pipettes, Graduated To 1 ml, Length: 145 mm, 24 Drops/ml, Non-Sterile, 500/Dispenser Box

GS-135030-500

7 ml Standard Transfer Pipettes, Graduated To 3 ml, Length: 155 mm, 23 Drops/ml, Non-Sterile, 500/Dispenser Box Also

Fine Tip Pipettes, Non-Graduated

GS-134010-500

1.3 ml Fine Tip Transfer Pipettes, Non-Graduated,

Length: 51 mm, 45 Drops/ml, Non-Sterile, 500/Dispenser Box

GS-134020-400

1.5 ml Fine Tip Transfer Pipettes, Non-Graduated,

Length: 104 mm, 50 Drops/ml, Non-Sterile, 400/Dispenser Box

GS-134070-250

3.3 ml Fine Tip Transfer Pipettes, Non-Graduated,

Length: 153 mm, 50 Drops/ml, Non-Sterile, 250/Dispenser Box

GS-134050-500

5.8 ml Fine Tip Transfer Pipettes, Non-Graduated,

Length: 147 mm, 55 Drops/ml, Non-Sterile, 500/Dispenser Box

GS-134050-S20

5.8 ml Fine Tip Transfer Pipettes, Non-Graduated,

Length: 147 mm, 60 Drops/ml, Sterile, 20/Bag, 20 Bags/Case, 400/Case

GS-134060-500

5.8 ml Fine Tip Transfer Pipettes, Non-Graduated,

Length: 157 mm, 50 Drops/ml, Non-Sterile, 500/Dispenser Box

GS-134090-400

8.7 ml Fine Tip Transfer Pipettes, Non-Graduated,

Length: 147 mm, 45 Drops/ml, Non-Sterile, 400/Dispenser Box Also available in larger quantities.

Standard Pipettes, Non-Graduated

GS-138060-500

4 ml Standard Transfer Pipettes, Non-Graduated, Blood Bank Style, Length: 130 mm, Non-Sterile, 500/Dispenser Box

GS-136030-500

4.5 ml Standard Transfer Pipettes, Non-Graduated, Narrow Stem, Length: 155 mm, 25 Drops/ml, Non-Sterile, 500/Dispenser Box

GS-139020-500

6.5 ml Standard Transfer Pipettes, Non-Graduated, Narrow Stem, Length: 155 mm, Non-Sterile, 500/Dispenser Box

GS-138080-500

7 ml Standard Transfer Pipettes, Non-Graduated, Length: 155 mm, 23 Drops/ml, Non-Sterile, 500/Dispenser Box

GS-138030-400

8 ml Standard Transfer Pipettes, Non-Graduated, Large Bulb, Length: 157 mm, 20 Drops/ml, Non-Sterile, 400/Dispenser Box

GS-139040-250

15 ml Standard Transfer Pipettes, Non-Graduated, Large Bulb, Length: 155 mm, Non-Sterile, 250/Dispenser Box Also available in larger quantities.

BEL-F37887-0000B

Bel-Bulb™ Pipettor, 2/Bag

GS-137035-500

GS-137030-500

GS-135030-500

GS-138060-500

GS-136030-500

GS-139020-500

GS-138080-500

GS-138030-400

GS-139040-250

GS-134010-500

GS-134020-400

GS-134070-250

GS-134050-500

GS-134050-S20

GS-134090-400

Mini Pipettes, Graduated & Non-Graduated

GS-138040-500

1.2 ml Mini Transfer Pipettes, Non-Graduated,

Length: 65 mm, 26 Drops/ml, Non-Sterile, 500/Dispenser Box

GS-134010-500

1.3 ml Mini Transfer Pipettes, Non-Graduated, Fine Tip,

Length: 51 mm, 45 Drops/ml, Non-Sterile, 500/Dispenser Box

GS-134020-400

1.5 ml Mini Transfer Pipettes, Non-Graduated, Fine Tip,

Length: 104 mm, 50 Drops/ml, Non-Sterile, 400/Dispenser Box

GS-136036-500

1.5 ml Mini Transfer Pipettes, Graduated To 0.3 ml,

Length: 115 mm, 21 Drops/ml, Non-Sterile, 500/Dispenser Box

GS-138020-500

1.7 ml Mini Transfer Pipettes, Non-Graduated,

Length: 87 mm, 27 Drops/ml, Non-Sterile, 500/Dispenser Box

GS-136020-500

4 ml Mini Transfer Pipettes, Non-Graduated, Narrow Stem, Length :85 mml, Non-Sterile, 500/Dispenser Box

Also available in larger quantities.

Extra Long Transfer Pipettes

Available in 9" and 12" lengths, these pipettes are ideal for reaching into large bottles, 24 hour urine containers, cylinders and jars.

Mini Transfer Pipettes

Ideal for use in diagnostic test kits and where small volume samples are required.

Extra Long Pipettes, Non-Graduated

GS-139030-500*

6 ml Extra Long Transfer Pipettes, Non-Graduated, Length: 225 mm, 28 Drops/ml, 500/Dispenser Box

GS-139050

23 ml Extra Long Transfer Pipettes, Non-Graduated, Length: 300 mm, 100/Dispenser Box

Also available in larger quantities.

Bellows Transfer Pipettes

The accordian-shaped, high capacity bulb of the Bellows Pipette acts as a reservoir for filling and expelling liquids. The bulb provides strong suction for use with viscous liquids.

Paddle Transfer Pipettes

These dual-purpose pipettes are used for small volume transfers and feature an integrated rigid paddle used for mixing, spreading and smearing.

Bellows Pipettes

GS-138002

7 ml Bellows Pipettes, Graduated To 1.5 ml, Excellent For Food And Cosmetic Applications, 100/Bag, 20 Bags/Case, 2000/Case, SPECIAL ORDER ITEM

GS-138005

15 ml Bellows Pipettes, Graduated To 5 ml, Excellent For Food And Cosmetic Applications, 100/Bag, 12 Bags/Case, 1200/Case, SPECIAL ORDER ITEM

Also available in larger quantities.

Transfer Pipettes with Paddle, Non-Graduated

GS-136080-500

0.8 ml Transfer Pipettes W/ Paddle, Non-Graduated, Length: 124 mm, 50 uL Drop Size, 500/Dispenser Box, Features A Paddle At One End To Facilitate The Spreading Of Substances

GS-136070-500

1 ml Transfer Pipettes W/ Paddle, Non-Graduated, Narrow Tip, Length: 130 mm, 30 uL Drop Size, 500/Dispenser Box, Features A Paddle At One End To Facilitate The Spreading Of Substances Also available in larger quantities.

GS-138040-500 GS-134010-500

GS-134020-400 GS-136036-500

GS-138020-500 GS-136020-500

GS-139030-500* GS-139050

GS-136080-500 GS-136070-500

Monoject 60 cc Syringes Monoject 140 cc Piston Syringes

Specimen Containers - Leak Resistant

Features

•Bold dual graduations 60 cc in 5 cc increments and 2 oz in 1/4" oz increments

•Autoclavable in rigid pack

•Oriented, compact package

•Sterile

Part Number Syringe Tip

TY-8881560224 Regular Luer 100

TY-8881560182 Eccentric Luer 100

TY-8881560141 Catheter (Irrigation)100

TY-8881560125 Luer Lock 100

TY-8881560265 Toomey Type (Irrigation)100

Features

•Bold dual graduations 140 cc in 5 cc increments and 5 oz in 1/4 oz increments

•Autoclavable

Part Number Syringe Tip

Non-Sterile

TY-8881114014 Regular Luer 20

TY-8881114030 Luer Lock 20

TY-8881114055 Catheter (Irrigation)20

Sterile

TY-8881114063 Luer Lock 20

Automatic Burettes

Self Zeroing Glass Burettes

These burettes have easy to read blue graduations against a white background. The delivery end is fitted into a plastic push button stopcock which permits drop by drop delivery. A small screw clamp adjusts drop speed as needed for titration. A polyethylene filling tube extends from the top of the burette into the bottle reservoir. Bottle, screw cap, and round base are polyethylene. Graduation accuracy is Class B. Sold Individually

BEL-H37918-0109E

BEL-H37918-0110E Automatic

BEL-H37918-0111E

BEL-H37918-0112E

These Tite-Rite™ containers are the ultimate in leak-tight storage and transport of liquids. An expanded inner liner in the screwcap is designed to compress against the uppermost walls and top rim of the container thereby providing an air-tight seal.

Technical information

• Container = Polypropylene (PP)

Cap = Polyethylene (PE)

• Molded graduation marks

• Ideal for hospital pneumatic tube systems

GS-6518

Tite-Rite™ Containers W/ Separate White Screwcap, Clarified Polypropylene, Graduated, Capacity: 20 ml (0.66 oz),

Container Dimensions: Diameter: 1 1/2" (35 mm), Height: 1 3/4", 1000/Case

GS-6520

Tite-Rite™ Container W/ Separate White Screwcap, Clarified Polypropylene, Graduated, Capacity: 40 ml (1.33 oz),

Container Dimensions: Diameter: 2" (48 mm), Height: 1 5/8", 600/Case

GS-6522

Tite-Rite™ Container W/ Separate White Screwcap, Clarified Polypropylene, Graduated, Capacity: 60 ml (2 oz),

Container Dimensions: Diameter: 2" (48 mm), Height: 2 3/8", 500/Case

GS-6524

Tite-Rite™ Container W/ Separate White Screwcap, Clarified Polypropylene, Graduated, Capacity: 90 ml (3 oz),

Container Dimensions: Diameter: 2" (48 mm), Height: 3", 400/Case

GS-6525

Tite-Rite™ Wide Mouth Container W/ Separate White Screwcap, Clarified Polypropylene, Graduated, Capacity: 90 ml (3 oz),

Container Dimensions: Diameter: 2 1/4" (53 mm), Height: 2 1/2", 300/Case

GS-6527

Tite-Rite™ Container W/ Separate White Screwcap, Clarified Polypropylene, Graduated, Capacity: 120 ml (4 oz),

Container Dimensions: Diameter: 2 1/4" (53 mm), Height: 3 1/8", 300/Case

GS-6540

Tite-Rite™ Container W/ Separate Yellow Screwcap, Polypropylene, Graduated, Capacity: 250 ml (8 oz),

Container Dimensions: Diameter: 3 1/2", Height: 2 1/4", 100/Case

GS-6542

Tite-Rite™ Container W/ Separate Yellow Screwcap, Polypropylene, Graduated, Capacity: 500 ml (16 oz),

Container Dimensions: Diameter: 3 1/2", Height: 4 3/8", 100/Case

GS-6545

Tite-Rite™ Container W/ Separate Yellow Screwcap, Polypropylene, Graduated, Capacity: 1000 ml (33 oz),

Container Dimensions: 4 3/8", Height: 5 3/8", 100/Case

4 oz (120 ml) Specimen Containers with Screw Cap

Our unique 4 oz Specimen Container features the EZ-Turn 1/4 turning screw cap which is designed to assist in the prevention of carpal tunnel syndrome. The lid opens and closes with one smooth movement, which minimizes the usage of the operator’s hand and lower arm area, and reduces the stress placed on the wrist.

GS-5912

4 oz Specimen Container W/ Label, Individually Wrapped, Sterile, 100/Box

GS-5910

4 oz Specimen Container W/ Label, Individually Wrapped, Sterile, 200/Box

GS-5915

4 oz Specimen Container, Non-Sterile, 500/Box

GS-5914

4 oz Specimen Container, Non-Sterile, 100/Box

GS-5916

4 oz Specimen Container W/ Affixed Thermometer & Screw Cap, Non-Sterile, 500/Box

Sample Tubes

These Sample Tubes have been designed for the storage and transport of biological material. They are manufactured of non-toxic polypropylene (PP) and offer a high degree of strength and clarity. The tubes come with external threads resulting in a smooth, uniform inner surface thereby reducing the risk of contamination.

Non-Sterile Containers: Graduated to 100 ml & frosted writing area

Sterile Containers: Graduated to 100 ml, individually wrapped & trilingual patient ID label (English, Spanish & French)

Container = Polypropylene (PP) Cap = Polyethylene (PE)

The screw caps for the sample tubes are made of polypropylene (PP) and are available either with or without an O-Ring.

Features

•Tubes withstand a temperature range of -196°C to +121°C

•Round bottom tubes can be centrifuged up to 17,000 x g

•Autoclavable (121°C) in an upright position with caps loosened

Sample tubes are available in the following two types:

Non-Graduated

GS-6030

1.2 ml, Polypropylene (PP), Self-Standing, 1000/Box

GS-6031

2.0 ml, Polypropylene (PP), Round Bottom, 1000/Box

GS-6032

2.0 ml, Polypropylene (PP), Self-Standing, 1000/Box

GS-6033

3.0 ml, Polypropylene (PP), Self-Standing, 1000/Box

GS-6034

4.0 ml, Polypropylene (PP), Round Bottom, 1000/Box

GS-6035

4.0 ml, Polypropylene (PP), Self-Standing, 1000/Box

GS-6038

5.0 ml, Polypropylene (PP), Round Bottom, 1000/Box

GS-6039

5.0 ml, Polypropylene (PP), Self-Standing, 1000/Box

Screw Cap with O-Ring

GS-6137C

Screw Cap, Natural, W/ O-Ring, 1000/Box

GS-6137B

Screw Cap, Blue, W/ O-Ring, 1000/Box

GS-6137G

Screw Cap, Green, W/ O-Ring, 1000/Box

GS-6137P

Screw Cap, Pink, W/ O-Ring, 1000/Box

GS-6137R

Screw Cap, Red, W/ O-Ring, 1000/Box

GS-6137W

Screw Cap, White, W/ O-Ring, 1000/Box

GS-6137Y

Screw Cap, Yellow, W/ O-Ring, 1000/Box

Graduated with White Writing Area

GS-6050

1.2 ml, Polypropylene (PP), Self-Standing, 1000/Box

GS-6051

2.0 ml, Polypropylene (PP), Round Bottom, 1000/Box

GS-6052

2.0 ml, Polypropylene (PP), Self-Standing, 1000/Box

GS-6053

3.0 ml, Polypropylene (PP), Self-Standing, 1000/Box

GS-6054

4.0 ml, Polypropylene (PP), Round Bottom, 1000/Box

GS-6055

4.0 ml, Polypropylene (PP), Self-Standing, 1000/Box

GS-6058

5.0 ml, Polypropylene (PP), Round Bottom, 1000/Box

GS-6059

5.0 ml, Polypropylene (PP), Self-Standing, 1000/Box

Screw Cap without O-Ring

GS-6136C

Screw Cap, Natural, 1000/Box

GS-6136B

Scre Cap, Blue, 1000/Box

GS-6136G

Screw Cap, Green, 1000/Box

GS-6136P

Screw Cap, Pink, 1000/Box

GS-6136R

Screw Cap, Red, 1000/Box

GS-6136W

Screw Cap, White, 1000/Box

GS-6136Y

Screw Cap, Yellow, 1000/Box

Glass Facts

Features

•Maximum visibility

•Impervious to permeation of gases

•Shapes and volumes do not change under vacuum pressure or when handled

•Recyclable

•Amber glass provides UV light protection

•Chemically inert

•Autoclavable

Cap Styles Also Available Upon Request: Black Phenolic Pulp/Vinyl, Black Phenolic Polyseal™, Black Phenolic Rubber & Bottle Only Bulk packages also available

Ready To Clean Glass Containers

Ready to Clean Bottles are designed for users who prefer to use their own cleaning process. Ready to Clean bottles are fully assembled with polypropylene caps and a friction fit .015" Teflon® disc. Both cap and liner can be washed, heated or autoclaved depending upon your application. The Teflon® disc is chemically inert, and will not interfere with your test results.

Clear Straight Sided Rounds Ready to Clean Black PP Cap & Teflon® Disc Cap Style

Precleaned by Vacuum & Ionization

Contaminants such as loose dirt, carton lint, aerosols, and fine glass particles are removed by the Vacuum and Ionization process.

Borosilicate Sample Vials

Clear Sample Vials are packed in Blue Plastic Corrugate to reduce carton dust.

Amber & Clear Round Dropper Bottles

With black polypropylene hole cap with glass dropper assembly.

Natural Polypropylene Jars with White PP Unlined Cap Style

Polystop™ Dropper Bottle

The dropper pulls out leaving the polypropylene stopper to protect the neck of the glass bottle. All parts disassemble to clean.

Features

•Soft vinyl bulb

•Ground standard taper neck in bottle

•"Bumper" opening protects the tip of the glass dropper

BEL-F11604-0030

Polystop™ Dropper Bottle 30 ml, Each

BEL-F11604-0060

Polystop™ Dropper Bottle 50 ml, Each

BEL-F11604-0125

Polystop™ Dropper Bottle 125 ml, Each

White Polypropylene Jars with White PP Unlined Cap Style

Clear Polystyrene Jars with White PP SturdeeSeal® PE Foam Cap Style

Clear Polystyrene Snap Cap Vials

HDPE Hedpaks®

Wide Mouth Natural HDPE Lab Style Bottles

Safety-Vented™ Labeled Wash Bottles

Eliminates Dangerous Drips

A unique, patented, 2-piece valve prevents pressure build-up of solvents within the wash bottle. The volatiles are vented eliminating solvent drips. Patented value allows dispensing with bottle upright or inverted. Wash bottles are labeled with six of the most commonly used solvent names. Bottles are low-density polyethylene, closures and venting assembly are polypropylene. Note: Use only with solvents compatible with LDPE.

Write-On™ Bottles

Simplify Labeling!

Large dedicated labeling areas help to standardize the way bottle contents are identified. A separate area is provided for name and a larger area allows for detail of contents or safety information and includes a defined space for date information. Bottles are molded of rugged HDPE in 500 and 1000 ml (16 & 32 oz) sizes and are available as narrow or wide mouth with leak proof polypropylene cap. Ideal for storing and transporting liquids or dry material.

FEP Wash Bottles

Fluoropolymer Wash Bottles, FEP Bottles; Tefzel ETFE closure/stem and draw tube. The most chemical-resistant wash bottle. Onepiece stem and closure for leak proof service. Provides contamination-free dispensinguseful for trace element work. Packaged Individually.

BEL-F11642-0622B

Acetone, 500 ml (16 oz), 3/Bag

BEL-F11642-0637B

Ethanol, 500 ml (16 oz), 3/Bag

BEL-F11642-0612B

Ethyl Acetate, 500 ml (16 oz), 3/Bag

BEL-F11642-0624B

Isopropanol, 500 ml (16 oz), 3/Bag

BEL-F11642-0638B

LYOB (Label Your Own Bottle), 500 ml (16 oz), 3/Bag

BEL-F11642-0623B

Methanol, 500 ml (16 oz), 3/Bag

BEL-F11642-0611B

Methyl Ethyl Ketone (MEK), 500 ml (16 oz), 3/Bag

BEL-F11643-0222B

Acetone, 250 ml (8 oz), 3/Bag

BEL-F11643-0237B

Ethanol, 250 ml (8 oz), 3/Bag

BEL-F11643-0224B

Isopropanol, 250 ml (8 oz), 3/Bag

BEL-F11643-0238B

LYOB (Label Your Own Bottle), 250 ml (8 oz), 3/Bag

BEL-F11643-0223B

Methanol, 250 ml (8 oz), 3/Bag

Fluoropolymer Bottles with Rounded Bottoms

Sold Individually.

JIP-BTP5009-0030N

Narrow Mouth PFA Bottle W/ PFA Closure, 30 ml

JIP-BTP5009-0060N

Narrow Mouth PFA Bottle W/ PFA Closure, 60 ml

JIP-BTP5009-0125N

Narrow Mouth PFA Bottle W/ PFA Closure, 125 ml

JIP-BTP5009-0250N

Narrow Mouth PFA Bottle W/ PFA Closure, 250 ml

JIP-BTP5009-0500N

Narrow Mouth PFA Bottle W/ PFA Closure, 500 ml

JIP-BTP5009-1000N

Narrow Mouth PFA Bottle W/ PFA Closure, 1000 ml

JIP-BTF5009-0030N

Narrow Mouth FEP Bottle W/ Tefzel Closure, 30 ml

JIP-BTF5009-0060N

Narrow Mouth FEP Bottle W/ Tefzel Closure, 60 ml

JIP-BTF5009-0125N

Narrow Mouth FEP Bottle W/ Tefzel Closure, 125 ml

JIP-BTF5009-0125W

Wide Mouth FEP Bottle W/ Tefzel Closure, 125 ml

JIP-BTF5009-0250N

Narrow Mouth FEP Bottle W/ Tefzel Closure, 250 ml

JIP-BTF5009-0250W

Wide Mouth FEP Bottle W/ Tefzel Closure, 250 ml

BEL-F10660-0500B

Write-On™ Bottles, 500 ml (16 oz), Narrow Mouth, 12/Bag

BEL-F10660-1000B

Write-On™ Bottles, 1000 ml (32 oz), Narrow Mouth, 6/Bag

BEL-F10662-0500B

Write-On™ Bottles, 500 ml (16 oz) Wide Mouth, 12/bag

BEL-F10662-1000B

Write-On™ Bottles, 1000 ml (32 oz) Wide Mouth, 6/Bag

JIP-WBT5008-125F

FEP Wash Bottle, 125 ml, Each

JIP-WBT5008-250F

FEP Wash Bottles, 250 ml, Each

JIP-WBT5008-500F

FEP Wash Bottles, 500 ml, Each

JIP-WBT5008-1000F

FEP Wash Bottles,1000 ml, Each

JIP-BTF5009-0500N

Narrow Mouth FEP Bottle W/ Tefzel Closure, 500 ml

JIP-BTF5009-0500W

Wide Mouth FEP Bottle W/ Tefzel Closure, 500 ml

JIP-BTF5009-1000N

Narrow Mouth FEP Bottle W/ Tefzel Closure, 1000 ml

JIP-GBF5009-1000W

Wide Mouth FEP Bottle W/ Tefzel Closure, 1000 ml

JIP-BTF5009-2000N

Narrow Mouth FEP Bottle W/ Tefzel Closure, 2000 ml

Fluoropolymer Vials

PFA Vials with threaded closures designed primarily for storage of samples. Available with flat, conical and rounded inner style configurations. Some vials are molded with solid outside bottoms for use on hot plates.

All vials also available in packs of 10 with tray. For vials with tray, add the letter "T" to the end of each catalog number for this configuration.

All Plain Closure (Non-Septum) PFA vials available with PTFE liner inside closure. Add the letter "L" to the end of each catalog number for this configuration.

PTFE Vials

Features

•Storage/shipping of valuable or aggressive materials

•For small reactions at lowpressure

•Thick wall construction

•Tapered inner walls for easy contents removal

JIP-014-125

Clavies® Autoclavable Bags

Safe, Convenient Biohazard Disposal

For maximum protection and convenience when disposing of biohazardous wastes, Clavies® transparent, autoclave bags are made of .05 mm (.002") thick polypropylene. Fill the bag with used Petri dishes, membrane filters, culture plates, pipettes, etc., then autoclave and discard. The three largest sizes hold 65, 200 and 240 standard Petri dishes respectively. Steam autoclavable at 121°C (250°F). 100/Box, 10 Boxes/Case

JIP-VIA5007-3VR

3 ml, PFA Vials, Bottom Style: Flat, Inner Style: Rounded, 23 mm,

Plain Threaded Closure, Each

JIP-VIA5007-5VSN

5 ml, PFA Vials, Bottom Style: Standard, Inner Style: Flat, 24 mm, Snap-On Closure, Each

JIP-VIA5007-6VRHD

6 ml, PFA Vials, Bottom Style: Flat, Inner Style: Rounded, 23 mm,

Plain Threaded, Heavy Duty Closure, Each

JIP-VIA5007-7VR

7 ml, PFA Vials, Bottom Style: Flat, Inner Style: Rounded, 24 mm,

Plain Threaded Closure, Each

JIP-VIA5007-15VR

15 ml, PFA Vials, Bottom Style: Flat, Inner Style: Rounded, 33 mm, Plain Threaded Closure, Each

JIP-VIA5007-15VC

15 ml, PFA Vials, Bottom Style: Flat, Inner Style: Conical, 33 mm, Plain Threaded Closure, Each

JIP-VIA5007-22VF

22 ml, PFA Vials, Bottom Style: Standard, Inner Style: Flat, 33 mm, Plain Threaded Closure, Each

JIP-VIA5007-30VR

30 ml, PFA Vials, Bottom Style: Flat, Inner Style: Rounded, 33 mm, Plain Threaded Closure, Each

JIP-VIA5007-30VC

30 ml, PFA Vials, Bottom Style: Flat, Inner Style: Conical, 33 mm, Plain Threaded Closure, Each

JIP-VIA5007-60VF

60 ml, PFA Vials, Bottom Style: Flat, Inner Style: Flat, 33 mm, Plain Threaded Closure, Each

JIP-VIA5007-5SVC

5 ml, PFA Septum Vials, Bottom Style: Fin-Type, Inner Style: Conical, 24 mm, Threaded Septum Closure, Each

JIP-VIA5007-7SVR

7 ml, PFA Septum Vials, Bottom Style: Flat, Inner Style: Rounded, 24 mm, Threaded Septum Closure, Each

JIP-VIA5007-30SVF

30 ml, PFA Septum Vials, Bottom Style: Standard, Inner Style: Flat, 33 mm, Threaded Septum Closure Each

JIP-VIA5007-60SVF

60 ml, PFA Septum Vials, Bottom Style: Flat, Inner Style:Flat, 33 mm, Threaded Septum Closure, Each

BEL-H13182-0810C

Clavies® Autoclavable Bags, 20 x 25 cm (8" x 10"), 1000/Case

BEL-H13182-0812C

Clavies® Autoclavable Bags 20 x 30 cm (8" x 12"), 1000/Case

BEL-H13182-0815C

Clavies® Autoclavable Bags 20 x 38 cm (8" x 15"), 1000/Case

BEL-H13182-1010C

Clavies® Autoclavable Bags 25 x 25 cm (10" x 10"), 1000/Case

BEL-H13182-1012C

Clavies® Autoclavable Bags 25 x 30 cm (10" x 12"), 1000/Case

BEL-H13182-1015C

Clavies® Autoclavable Bags 25 x 38 cm (10" x 15"), 1000/Case

Whirl-Pak® Sterile Sampling Bags

Use these Sterile LDPE Bags to safely hold your solids and liquids. Easy-to-use, simply flip bag around wire/tape and bend wire to seal.

Sampling Bags without White Labeling Area

Features

•Puncture-proof tabs ensure wire will not poke through even after extensive use

•Sampling bags are available without or with a white labeling area

•Guaranteed sterile

•Reduced storage space

•Easy identification

•Leakproof closure

"Speci-Sponge" Bags are designed to sample work surfaces and equipment Listeria, Salmonella, and other food-borne pathogens: contain a 38 x 76 mm (1.5" x 3") sponge that is free of bactericides and non-inhibitory; with write labeling area. The Whirl Pak® Stand-Up Bag gives you the freedom to perform important laboratory functions with both hands, because it will stand up completely by itself.

The Whirl Pak® Retention Bag is used for long-term storage up to two years. Filter Bags contain a third layer of finely perforated polyethylene, which filters out the solids in the sample when used in a homogenizer blender.

Sampling Bag Accessories Rack Tray for Shaking Incubation

NA-B01432WA

Holds Rack NA-B00677WA, Small Bags

NA-B01433WA

Holds Rack NA-B00751WA, Medium Bags

NA-B01434WA

Holds Rack NA-B01048WA, Large Bags

Sampling Bag Accessories Carrying Racks

NA-B00677WA

Double Grid 21 Compartment

NA-B00678WA

Double Grid 15 Compartment

NA-B00750WA

Double Grid 30 Compartment

NA-B00751WA

Double Grid 12 Compartment

NA-B01048WA

Double Grid 6 Compartment (Also For Incubator Use)

NA-B01023WA

Single Grid 18 Compartment

Sampling Bag Accessories

Playmate® Cooler

NA-B00772WA

Double Grid 18 Compartment Fits Regular Size Playmate® Cooler

NA-B01109WA

Double Grid 15 Compartment Fits Little Playmate® Cooler

Sampling Bag Accessories Rack Handle

NA-B01309WA Rack Handle

Single Scale Graduated Cylinders

Roll-Proof and Easy to Read

These Single Scale Graduated Cylinders have a single scale with raised numerals for easy reading. Flared top rims and large spouts facilitate pouring, and octagon-shaped bases provide stability. The "nonwetting" polypropylene surface eliminates concave meniscus and makes reading easier and more accurate. Chemically resistant and autoclavable at 121°C (250°F). Sold Individually.

"No-Drip" Spout for Easy Pouring

Graduated Beakers

Griffin Low Form Polypropylene Beakers are translucent, chemical resistant and will stack without sticking together. Raised numeric graduations show approximate volume (± 5%). All sizes are steam autoclavable at 121ºC (250ºF).

BEL-F28452-0000E

Single Scale Graduated Cylinders, Vol.: 10 ml, Subdivision: 0.2 ml, Each

BEL-F28453-0000E

Single Scale Graduated Cylinders, Vol.: 25 ml, Subdivision: 0.5 ml, Each

BEL-F28454-0000E

Single Scale Graduated Cylinders, Vol.: 50 ml, Subdivision: 1.0 ml, Each

BEL-F28455-0000E

Single Scale Graduated Cylinders, Vol.: 100 ml, Subdivision: 1.0 ml, Each

BEL-F28456-0000E

Single Scale Graduated Cylinders, Vol.: 250 ml, Subdivision: 2.0 ml, Each

BEL-F28457-0000E

Single Scale Graduated Cylinders, Vol.: 500 ml, Subdivision: 5.0 ml, Each

BEL-F28458-0000E

Single Scale Graduated Cylinders, Vol.: 1000 ml, Subdivision: 10.0 ml, Each

BEL-F28459-0000E

Single Scale Graduated Cylinders, Vol.: 2000 ml, Subdivision: 20.0 ml, Each

Holdfast™ Graduated Cylinders

Grip Handle for Steady Pouring

The handle on a Holdfast™ Graduated Cylinder provides a secure, solid grip for superior control. The result is safer, more convenient pouring. The one-piece polypropylene cylinder will not create a meniscus. The "Total Contained, Total Delivered" double scale is accurate and easy to read, and the hexagonal base prevents tipping and rolling. The hand opening is 89 x 29 mm (3" x 1 1/8"). Steam autoclavable at 121°C (250°F).

BEL-F28461-1000E

Holdfast™ Graduated Cylinders, 1000 ml, Each

BEL-F28461-2000E

Holdfast™ Graduated Cylinders, 2000 ml, Each

BEL-F26210-0000B

Graduated Beakers, 50 ml, 12/Bag

BEL-F26211-0000B

Graduated Beakers, 100 ml, 12/Bag

BEL-F26212-0000B

Graduated Beakers, 150 ml 12/Bag

BEL-F26213-0000B

Graduated Beakers, 250 ml, 6/Bag

BEL-F26214-0000B

Graduated Beakers, 400 ml, 6/Bag

Large Volume Beakers

5 & 10 Liter Capacity

Ideal for Pilot Plant Work

BEL-F26215-0000B

Graduated Beakers, 600 ml, 4/Bag

BEL-F26216-0000B

Graduated Beakers, 1000 ml, 3/Bag

BEL-F26217-0000B

Graduated Beakers, 2000 ml, 1/Bag

BEL-F26219-0000B

Graduated Beakers, 4000 ml, 1/Bag

These non-graduated beakers feature flared rims as well as spouts for quick, easy pouring when large volumes are handled. Made of polypropylene, they offer good chemical resistance and are steam autoclavable at 121ºC (250ºF).

BEL-F26219-0005E

Large Volume Beaker, 5 Liter, Bottom O.D.: 16.5 cm (6 1/2"), Top O.D.: 21 cm (8 1/4"), Height: 26 cm (10 1⁄4"), Each

BEL-F26219-0010E

Large Volume Beaker, 10 Liter, Bottom O.D.: 22.2 cm (8 3/4"), Top O.D.: 26.6 cm (10 1/4"), Height: 31.1 cm (12 1/4"), Each

Sterilizing Trays

Lightweight and Corrosion Proof Molded polypropylene trays have rounded corners and smooth, tapered sides for nesting. Ideal for sterilizing instruments and cleaning glassware. Steam autoclavable at 121°C (250°F). Sold Individually.

PTFE Thick Wall Beakers

Features

• Isostatically molded in pure, FDA approved, PTFE

• Machined base for good heat transfer

• Molded-in pouring spout

• Totally chemically resistant and inert

JIP-BEA5001-1

PTFE Thick Wall Beakers, 1 ml, Each

JIP-BEA5001-5

PTFE Thick Wall Beakers, 5 ml, Each

JIP-BEA5001-10

PTFE Thick Wall Beakers, 10 ml, Each

JIP-BEA5001-25

PTFE Thick Wall Beakers, 25 ml, Each

JIP-BEA5001-50

PTFE Thick Wall Beakers, 50 ml, Each

JIP-BEA5001-100

PTFE Thick Wall Beakers, 100 ml, Each

JIP-BEA5001-150

PTFE Thick Wall Beakers, 150 ml, Each

JIP-BEA5001-250

PTFE Thick Wall Beakers, 250 ml, Each

JIP-BEA5001-400

PTFE Thick Wall Beakers, 400 ml, Each

JIP-BEA5001-500

PTFE Thick Wall Beakers, 500 ml, Each

JIP-BEA5001-600

PTFE Thick Wall Beakers, 600 ml, Each

JIP-BEA5001-1000

PTFE Thick Wall Beakers, 1000 ml, Each

JIP-BEA5001-2000

PTFE Thick Wall Beakers, 2000 ml, Each

JIP-BEA5001-5000

PTFE Thick Wall Beakers, 5000 ml, Each

BEL-H16260-0000E

Sterilizing Tray, 30 x 20 x 13 mm (12" x 7 3/4" x 5 1/8"), Each

BEL-H16262-0000E

Sterilizing Tray, 48 x 27 x 13 mm (19" x 10 1/2" x 5 1/8"), Each

BEL-H16264-0000E

Sterilizing Tray, 51 x 39 x 13 mm (20 1/4" x 15 1/2" x 5 1/8"), Each

Small Pails

These 7.6 Liter (8 qt) pails have an airtight lid, removable plated steel support ring and bail handle. The height is 25 cm (10") and the top I.D. is 20 cm (8"). The Scienceware®

BEL-F16775-0000 pail and cover are steam autoclavable at 121°C (250°F). Packed Per Each.

Stainless Steel Storage Containers / Beakers

Features

•Highly non-corrosive stainless steel can be safely heated

•Smooth finish provides for easy cleaning

BEL-F16771-0000E (Non-Autoclavable) White Polyethylene, Each BEL-F16775-0000E (Autoclavable) Natural Polypropylene, Each

Stainless Steel Funnels

Features

• With Hanging Hook & Vented Stem

Stainless Steel Graduated Measures

•Graduated in ounces and cc's, measures have easy grip handles and large, smooth pouring spouts

Stainless Steel Griffin Style Beakers

Features

•Seamless construction allows for safe transfer to liquids

•Capacity full mark near top of beaker assures accurate measuring

Dimensions (Dia.xH)Unit / Case

• Attached hang rings allow for convenient storage

• Liquid flows smoothly through vented stem

PW-3000B

PW-4000B

PW-2W* 2000 ml Beaker With Closed Handle5 1/16" x 6 5/8"4

PW-3W* 3000 ml Beaker With Closed Handle6 1/16" x 7"4