AIR COMPRESSOR (E13C: 496cm3 TYPE)
EN13–7
OVERHAUL EN0111013H200001
IMPORTANT POINT - MOUNTING FLYWHEEL
1. (1)
INSTALLATION PROCEDURES Set the No.1 or No.6 cylinder to the top dead center of the compression stroke.
(2) (3)
Install the O-ring to the groove of the air compressor. Align the white mark on the drive gear and the mark on the timing gear case, then install the air compressor into the timing gear case.
SHTS011101300007
A
NOTICE Do not rotate the drive gear until gears are engaged.
CENTER LINE OF INSPECTION HOLE CRANKSHAFT AND INSTALLATION BORE
MARK
WHITE MARK VIEW A SHTS011101300008