YLINDER LINERS
PIST
• With the piston's "S' front mark facing the front of the engine, install the piston and connecting rod assembly in accordance with the following procedure.
",Ll."
D
D: Front of engine
c2
03384
<6D14, 14-T, 15-T>
02009
<6D16, 16-E, 16-T, 16-PT, 16-TL, 16-TLE> • Fit the �a Piston Guide Clamp over the piston skirt. Using the bolt E of the �b Piston Guide Lever, adjust the clamp's inside diameter such that it matches the piston's outside diameter. • Once the �a Piston Guide Clamp is adjusted properly, remove it from the piston and smear engine oil over the following items: • Outside of piston • Inside of the �a Piston Guide Clamp • Cylinder liner 11651
F: �a Piston Guide Clamp tightening direction
02011
• With the piston installed, align the mating marks Fon the connecting rod and connecting rod cap 3 and tighten the bolts to the specified torque. Then, tighten the bolts 1 further in accordance with the follow ing procedure.
3
01990
11-32