Page 1

2017


Company Cola » 2 Why Choose Pellets? » 3 Cola Approved Partner Assurance » 4 Certifications » 5 Pellet Air Stoves Overview » 6 Pellet Hydro Stoves Overview » 7 Pellet Air Stoves Range » 8 Removable Pellet Inserts » 58 Pellet Hydro Stoves Range » 62 Biomass Pellet Boiler » 80


Cola Cola was established in 1963 as a metalworking company for the construction of heating systems. The strategic focus was the use of "poor" fuels such as wood and coal, but changing the idea of the stove from that of a simple heat source to an object of refined beauty and decor, a winning choice that put Cola among the leaders in this emerging market in post-war Italy. A few years later the energy crisis gave impetus to the appearance of a new product that would revolutionise the multi-fuel sector: in 1973, an engineer from Idaho in the USA invented the pellet, an agglomerate obtained by the compression of sawdust and wood powder without the addition of glues or chemicals. It gradually became increasingly used as fuel for industries and subsequently as an alternative for fueling condominium boilers or stoves for private homes. As a result, on the basis on the experience acquired and successes in the sector of wood-burning stoves and boilers, the Cola company worked to develop specific products in the field of pellets, eventually creating and patenting a brazier/brazier holder combustion system which is still among the safest and most effective on the market, ensuring perfect combustion, reduced residual ash and low dust emissions and flue gas. Cola combines functionality and attractive design, heating efficiency and the suitability of the product to be used as a furnishing element. Cola srl was ready for the evolutionary leap at the dawn of the new millennium.

2

Why Choose Pellets? Wood pellets are the most common type of pellet fuel and are generally made from compacted sawdust and related waste from lumber and wood product industries. They are practical, environmentally friendly, easy to carry and store and offer the best price-energy efficiency ratio. The high density and low moisture content of wood pellets allows them to be burned with very high combustion efficiency. Pellets have different types of certifications and those conforming to the norms commonly used in Europe have less than 10% water content, are uniform in density, have good structural strength and produce low dust and ash content. The advantages of using a pellet stove rather than a wood burning stove are many. Pellet stoves can be ignited automatically, turned on and off instantaneously and can be thermostatically controlled and programmed remotely using WiFi controls; wood burning stoves must be ignited manually and cannot be controlled in the same way. Pellet stoves heat the room by convection using a fan which spreads the heat much more efficiently and evenly, unlike wood which heats by radiation. Pellets produce very little ash and the ash pan is easy to empty, with just an annual service required in the way of maintenance. Pellets are readily available to buy online and from garden centres and DIY stores. They can be purchased in small manageable bags so not a lot of storage space is required and because they have a low moisture content and are not required to dry out, as with wood, they can be stores pretty much anywhere. They do not have to be seasoned and pose no risk of insect infestation.

3


Cola Approved Partner Assurance In order to help you with your purchase of a Cola Stoves appliance we have created a series of icons that are issued to all our authorised retailers, installers and distributors.

Our Strong Points

Certifications

The technologies developed and rigorous laboratory testing ensure the excellent performance, low consumption, long autonomy and, above all, low emissions of COLA products. The name HiPe emphasizes the high performance of the pellet stoves, that feature high thermal efficiency and controlled combustion, enabling a reduction in the fume value thresholds in order to comply with the latest local and European regulations, in respect for the environment and the eco-compatible policies of each country.

These icons guarantee that you are purchasing a genuine Cola Stoves appliance and that the people assisting you and providing any service related to the appliance are fully trained and authorised by Cola Stoves UK.

LEGEND OF ICONS

Ductable pellet stove

Stove with optional top or rear double fume outlet

External combustion air intake

Remote/radio control as standard

Pellet hydro stove

Pellet air stove

Pellet stove with domestic hot water production

Automatic cleaning of brazier/ brazier holder system in cast iron (Cola patent)

High performance

4

BImSchV2

15a B-VG

Pellet stove with the possibility of turning fans off

The Microgeneration Certification Scheme (MCS) is an industry-led and nationally recognised quality assurance scheme, supported by the Department for Business, Energy & Industrial Strategy (BEIS). MCS certifies microgeneration products used to produce electricity and heat from renewable sources. MCS also certifies installation companies to ensure the microgeneration products have been installed and commissioned to the highest standard for the consumer. DEFRA Exempt icon means that the appliance has been granted exempt status by DEFRA (Department for Environment & Rural Affairs) and can be used in those areas of the UK where smoke control policy is in force. You can contact the environmental services department of your local council to find out if you live in a smoke controlled area. D E F R A E XE M P T

LABORATORY CERTIFICATIONS

Cola products meet the requirements of the German standard BImSchV2 and 15aB-VG (Austrian environmental standard).

VKF: Swiss certificate of fire-prevention approval for heating equipment and antismog regulation.

HETAS is the independent UK body recognised by the Department for Environment, Food and Rural Affairs (DEFRA) for the official testing and approval of domestic solid fuels, solid fuel burning appliances and associated equipment and services. The HETAS Approved Product logo gives reassurance to the installer and end user that the appliance they are going to buy complies fully with current energy efficiency and safety requirements.

As an approved Cola Stoves partner, we guarantee: • Quick access to genuine Cola Stoves spare parts • Two year hassle-free warranty registered with Cola Stoves UK • Immediate technical help from Cola Stoves UK Customer Service • Access to Cola Stoves trained HETAS engineers • Updates on the latest stove products & technologies For information on where to find an authorised Cola Stoves partner in your area, please don’t hesitate to contact us by phone or email. Tel: 0330 205 0002 Email: sales@colastoves.co.uk

Thanks to a technologically advanced design and laboratory testing, Cola products have been certified with the most prestigious international quality marks and meet the highest standards of safety and environmental compatibility. These certifications relevant to the production systems, laboratory testing and the specific quality of products ensure the absolute value of the products, thermal efficiency and compliance with the parameters of CO emissions envisaged by the most stringent regulations.

PRODUCT CERTIFICATIONS

Flamme Verte quality label (in France). COLA wood burning stoves comply with the Flamme Verte quality label (Environment and Energy Saving Agency).

BAFA: Federal Office of Economics and Export Control (BAFA). German Federal Authority that controls the appropriate use of renewable energies for maintaining the balance between energy power (heating) and substances harmful to the environment (fumes, dusts, gases), imposing strict regulations and tests that COLA products have brilliantly passed.

CE: Declaration of Conformity - the products comply with the European Standard.

EN 14785 Requirements for the design, fabrication, construction, safety and performance (efficiency and emissions), instructions and marking, as well as related test methods and fuels for type testing, for pellet-burning heating units.

EN 13240 The standard specifies the requirements for the design, fabrication, construction, safety and performance (efficiency and emissions), instructions and marking, together with the related test methods for type testing of solid fuel-burning stoves. The standard applies to non-mechanically fed units and does not apply to units with fan-assisted combustion air. EN 303-5

The European standard applies to heating boilers, including related safety devices, having a nominal heat output up to 500 kW, designed to be fed with solid fuels, using water as the heat transfer fluid at a maximum temperature of 110°C, and working at a maximum pressure of 6 bar.

EN 12815 The standard specifies the requirements for the design, fabrication, construction, safety and performance, instructions and marking, together with related test methods and fuels, for type approval of solid fuel-burning heating cookers. DOP regulation: Regulation (EU) no. 305/2011 establishes the rules for the marketing of construction products, with the MANUFACTURER's obligation, when the product is put on the market, to draw up a Declaration of Performance (DoP) in the language or languages ​​of the Member State, containing information on performance in relation to the essential characteristics. Since 1 July 2013 the Declaration of Performance (DoP) has replaced the Declaration of Conformity and is available on the WEB.


Pellet Air Stove

Pellet Hydro Stove

H series 'AIR' combustion chamber (6 – 9 kW) and (10-13 kW): optimised heat exchange areas and flueways offer high thermal efficiency, a reduction in incomplete combustion, and lower dust emissions with values below those specified by European Standards (Germany – Austria) as well as those in force and envisaged for 2015. Ventilation (air heating models) is very efficient, in being distributed over the entire perimeter plate of the combustion chamber, with the possibility of automatic or manual control of fan speed. Also, some stove models are designed for ducting, to convey the hot air at a certain pressure and flow to where required by the user.

'WATER' combustion chamber – heating chamber (13-17 kW) and (24 – 28 kW): designed with large heat exchange areas and some walls in vermiculite for high thermal efficiency, a reduction in incomplete combustion values and lower dust emissions with adequate size for the internal water volume in order to provide for sudden drawing of hot water while continuing regular operation.

2

1

1

2

3 3

5 4

7 17

11

9 14

5

8

6

23

4

7

10

10

13

15

12 11

16

6

Control panel Pellet hopper closing door Ventilated ceramic cover Cast iron finned exchanger Pressure relief valve Fume baffle Pellet hopper Pellet auger Combustion chamber vermiculite internal walls Pellet chute Pellet hopper safety thermostat probe Rear air fan Pellet igniting heating element Cast iron door-frame with glass ceramic Cast iron brazier Combustion air inlet pipe Brazier holder Fume exhaust pipe Ash container Fume extractor Side air fan Adjustable foot Panoramic external glass

1 2 3

13

19

18

7

6

20

15

9

19

21

20

23

8 Pellet auger 9 Auger rotation gearmotor

22

10 Combustion chamber inner wall in vermiculite 11 Pellet chute 12 Pellet hopper safety thermostat probe 13 Pellet igniting heating element 14 Cast iron brazier

19 Heating chamber 20 Ash container

17

21 22

6 Door in cast iron with glass ceramic 7 Pellet hopper

17 Electrical-electronic components box 18 Fume exhaust pipe

22

16

19

23

15 Brazier holder 16 Combustion air inlet pipe

13

18

5 Heating chamber closing cover

25

11 12

15

4 Pressure relief valve

24

10

14

3 Ventilated ceramic cover

18

20

21

8

2 Pellet hopper closing door

16

14

5

1 Control panel

9

17

4 6

8

12

26

21 Fume extractor 22 Fume-water heat exchange pipes 23 Water circuit pressure transducer 24 Pressure relief valve 25 Water system circulating pump 26 Adjustable foot

7


PELLET AIR STOVES Darwin Communication Utility - Remotable Interface Vision Hermetic Ambra Ambra Lux Vision HR Smart Free HR Antigua Cupido Aloe Diamond Aurora Fire HR Calla Ductable Mimosa Ductable Sprint Steel Ductable Sprint Majolica Ductable Medea Beauty 13 Ductable Sabina Charme Charme Ductable

» 10 » 11 » 12 » 14 » 16 » 18 » 20 » 22 » 24 » 26 » 28 » 30 » 32 » 34 » 36 » 38 » 40 » 42 » 44 » 46 » 48 » 50 » 52

The pellet stoves are autonomous because the pellets in the hopper are fed in an automatic and programmed way, ignite automatically and are adjusted by means of digital controls or remote control. Used for heating the room where installed or for ducting hot air in other rooms in the house, they ensure high thermal efficiency. The formal features of Cola stoves are the original reasons for the "comma" and "interpenetrating fins" that create a blend of originality, play of chromatic reflections and a feeling great thermal diffusion. The main features of Cola pellet stoves are: -- Automatic or manual adjustment of air fan speed as set by the customer -- Cast iron brazier -- Fire door with frame in cast iron and self-cleaning panoramic glass ceramic -- Large heat exchange area with upper exchanger and front frame in cast iron -- Automatic brazier cleaning to keep combustion constant and for low maintenance -- Alarm diagnostics and easy service -- Management in up to 3 foreign languages as well as the Italian version -- Ample glass area for better visibility of flame -- Possibility of connection to thermostat/external chronothermostat with cable -- Removable ash pan -- Adjustable feet on bottom of stove to facilitate installation also on uneven floors -- Automatic lighting and shutdown by weekly chronothermostat function with up to 4 lightings/ shutdowns a day -- Safety systems: overpressure valve incorporated in the cast iron upper exchanger, overtemperature safety thermostat, pellet hopper and low pressure gauge to ensure safe operation of the unit

NB: The heatable volume depends on the insulation of the home. Calculated on 35 W/m³ - 30 kcal/h m³; consumption values are

8

the result of laboratory tests

9


10

Darwin Communication

UTILITY - Remotable Interface

Cola introduces "DARWIN COMMUNICATION", the innovative APPSTOVE remote control system via Internet for the management of pellet boilers, heating stoves and stoves. Register on the web and then check the stove from the PC or APPS for SMARTPHONE and TABLET (IOS/ANDROID/ WINDOWS). Through the Internet connection (Web or downloading the special App), you can manage your product by entering directly in the controller of one or more stoves, adjusting lighting, turning off, temperature and output. You can also use the weekly programming with the possibility of 4 daily independent periods. All this without moving from where you are, in the office or in the gym, and coming home to find the heat of a Cola stove awaiting you.

The Cola Utility console is a remotable interface, with direct connection to the board of boilers and/or pellet stoves, and has a 216x128 dot (81.9 x 46.8 mm) viewer and 4 touch buttons for managing functions, just like operating directly on the boiler/stove display. It is enclosed in a WHITE ABS container (126.1 x 91 mm). It is connected with two wires and communicates with the main board via powerline. From the comfort of your living-room you can adjust the desired temperature, the duration of use of the boiler (or pellet stove), the output and daily and weekly programming of lighting.


VISION HERMETIC dust emissions: 14 mg/mÂł max efficiency: 95.5 % heat output: 6.5 kW heatable volume*: 185 mÂł

Corten

Bordeaux

829

White

Black

570

VISION HERMETIC* - Cladding in painted steel - Structure: steel and cast iron Combustion chamber: Steel, cast iron and vermiculite Heat input - reduced 7,18-2,62 Heat output nominal - reduced 6,5-2,5 Fuel / Hourly consumption at Nom. output - Red. output 1,5-0,5 CO emission 13% O2 at Nom. output - Red. output 0,014-0,018 Dust emission PP at 13% O2 14 Fume outlet temperature at Nom. output - Red. output 156-68 Efficiency at Nom. output - Red. output 90,5-95,5 Flue draught 10-14 Fume exhaust diameter 80 Air inlet diameter 32 Electrical power supply 230-50Hz-2A Electrical power input 420-85 Min. safety distance (rear - right/left side - floor) 200-300-0 Hopper capacity 15 Weight 65 Heatable volume** 185

0

51

*Hermetic means the stove is airtight which reduces the air exchange between the combustion chamber of the stove and the room. **Depending on the insulation of the home and calculated on 35 W/m3

in extension phase

15a B-VG EN14785 BImSchV2

12

13


AMBRA dust emissions: 11.7 mg/m³ max efficiency: 91.42 % heat output: 6.33 kW heatable volume*: 180 m³

Rust

Corten

Ivory

Bordeaux

934

White

Black

440

Cladding in painted steel - Structure: steel and cast iron Combustion chamber: Steel, cast iron and vermiculite Heat input - reduced Heat output nominal - reduced Fuel / Hourly consumption at Nom. output - Red. output CO emission 13% O2 at Nom. output - Red. output Dust emission PP at 13% O2 Fume outlet temperature at Nom. output - Red. output Efficiency at Nom. output - Red. output Flue draught Fume exhaust diameter Air inlet diameter Electrical power supply Electrical power input Min. safety distance (rear - right/left side - floor) Hopper capacity Weight Heatable volume*

510

kW kW kg/h % mg/m³ °C % Pa mm mm V W mm kg kg m³

*Depending on the insulation of the home and calculated on 35 W/m3

14

15

15a B-VG EN14785 BImSchV2

7.10 - 1.99 6.33 - 1.82 1.46 - 0.41 0.02 - 0.038 16 - 11.7 176.4 - 74.1 89.10 - 91.42 10 - 14 80 32 230 V - 50 Hz - 2A 420 start - 85 200 - 300 - 0 15 65 180


AMBRA LUX dust emissions: 11.7 mg/m³ max efficiency: 91.42 % heat output: 6.33 kW heatable volume*: 180 m³

Ivory

Bordeaux

White

934

Black

Cladding in painted steel and majolica - Door in mirror-effect glass ceramic - Structure: steel and cast iron Combustion chamber: Steel, cast iron and vermiculite Heat input - reduced kW 7.10 - 1.99 Heat output nominal - reduced kW 6.33 - 1.82 Fuel / Hourly consumption at Nom. output - Red. output kg/h 1.46 - 0.41 CO emission 13% O2 at Nom. output - Red. output % 0.02 - 0.038 Dust emission PP at 13% O2 mg/m³ 16-11.7 Fume outlet temperature at Nom. output - Red. output °C 176.4 - 74.1 Efficiency at Nom. output - Red. output % 89.10 - 91.42 Flue draught Pa 10 - 14 Fume exhaust diameter mm 80 Air inlet diameter mm 32 Electrical power supply V 230 V - 50 Hz - 2A Electrical power input W 420 start - 85 Min. safety distance (rear - right/left side - floor) mm 200 - 300 - 0 Hopper capacity kg 15 Weight kg 65 Heatable volume* m³ 180

440

510

*Depending on the insulation of the home and calculated on 35 W/m3

in extension phase

15a B-VG EN14785 BImSchV2

16

17


VISION HR dust emissions: 11.7 mg/m³ max efficiency: 91.42 % heat output: 6.33 kW heatable volume*: 180 m³

Corten

Bordeaux

White

829

Black

570

Cladding in painted steel- Structure: steel and cast iron Combustion chamber: Steel, cast iron and vermiculite Heat input - reduced Heat output nominal - reduced Fuel / Hourly consumption at Nom. output - Red. output CO emission 13% O2 at Nom. output - Red. output Dust emission PP at 13% O2 Fume outlet temperature at Nom. output - Red. output Efficiency at Nom. output - Red. output Flue draught Fume exhaust diameter Air inlet diameter Electrical power supply Electrical power input Min. safety distance (rear - right/left side - floor) Hopper capacity Weight Heatable volume*

510

kW kW kg/h % mg/m³ °C % Pa mm mm V W mm kg kg m³

*Depending on the insulation of the home and calculated on 35 W/m3

in extension phase

18

19

15a B-VG EN14785 BImSchV2

7.10 - 1.99 6.33 - 1.82 1.46 - 0.41 0.02 - 0.038 16 - 11.7 176.4 - 74.1 89.10 - 91.42 10 - 14 80 32 230 V - 50 Hz - 2A 420 start - 85 200 - 300 - 0 15 65 180


SMART dust emissions: 13.7 mg/m³ max efficiency: 95.7 % heat output: 6.97 kW heatable volume*: 199 m³

White

Bordeaux

Cladding in painted steel - Structure: steel and cast iron Combustion chamber: Steel, cast iron and vermiculite Heat input - reduced Heat output nominal - reduced Fuel / Hourly consumption at Nom. output - Red. output CO emission 13% O2 at Nom. output - Red. output Dust emission PP at 13% O2 Fume outlet temperature at Nom. output - Red. output Efficiency at Nom. output - Red. output Flue draught Fume exhaust diameter Air inlet diameter Electrical power supply Electrical power input Min. safety distance (rear - right/left side - floor) Hopper capacity Weight Heatable volume*

968

D E F R A E XE M P T

Black

460

kW kW kg/h % mg/m³ °C % Pa mm mm V W mm kg kg m³

4

50

7,61-2,70 6,97-2,58 1,61-0,57 0,02-0,02 13,7 151-80,2 91,6-95,7 10-14 80 50 230-50Hz-2A 420-120 200-300-0 17 75 199

*Depending on the insulation of the home and calculated on 35 W/m3

15a B-VG EN14785 BImSchV2

20

21


FREE HR dust emissions: 9.9 mg/m³ max efficiency: 95.66 % heat output: 8.27 kW heatable volume*: 236 m³

Ivory

494 Bordeaux

D E F R A E XE M P T

991

Black

Cladding in painted steel - Top and front panel in majolica - Structure: steel and cast iron Combustion chamber: Steel, cast iron and vermiculite Heat input - reduced kW 9.15 - 2.7 Heat output nominal - reduced kW 8.27 - 2.58 Fuel / Hourly consumption at Nom. output - Red. output kg/h 1.937 - 0.57 CO emission 13% O2 at Nom. output - Red. output % 0.02 - 0.02 Dust emission (15a-B-VG) at Nom. output mg/m³ 9.9 Fume outlet temperature at Nom. output - Red. output °C 173.4 - 80.2 Efficiency at Nom. output - Red. output % 90.42 - 95.66 Flue draught Pa 10 - 14 Fume exhaust diameter mm 80 Air inlet diameter mm 50 Electrical power supply V 230 V - 50 Hz - 2A Electrical power input W 420 start - 120 Min. safety distance (rear - right/left side - floor) mm 200 - 300 - 0 Hopper capacity kg 19 Weight kg 93 Heatable volume* m³ 236

500

*Depending on the insulation of the home and calculated on 35 W/m3

22

23

15a B-VG EN14785 BImSchV2


ANTIGUA dust emissions: 9.9 mg/m³ max efficiency: 95.66 % heat output: 8.27 kW heatable volume*: 236 m³

Serpentino

White

Bordeaux

Cladding in painted steel - Structure: steel and cast iron Combustion chamber: Steel, cast iron and vermiculite Heat input - reduced Heat output nominal - reduced Fuel / Hourly consumption at Nom. output - Red. output CO emission 13% O2 at Nom. output - Red. output Dust emission PP at 13% O2 Fume outlet temperature at Nom. output - Red. output Efficiency at Nom. output - Red. output Flue draught Fume exhaust diameter Air inlet diameter Electrical power supply Electrical power input Min. safety distance (rear - right/left side - floor) Hopper capacity Weight Heatable volume*

1003

D E F R A E XE M P T

Black

516 kW kW kg/h % mg/m³ °C % Pa mm mm V W mm kg kg m³

0

51

9,15-2,7 8,27-2,58 1,94-0,57 0,02-0,02 9,9 173,4-80,2 90,42-95,66 10-14 80 50 230-50Hz-2A 420-120 200-300-0 18 107 236

*Depending on the insulation of the home and calculated on 35 W/m3

in extension phase

15a B-VG EN14785 BImSchV2

24

25


CUPIDO dust emissions: 8.9 mg/m³ max efficiency: 92.34 % heat output: 8.13 kW heatable volume*: 232 m³

Rust

Ivory

Bordeaux

White

1085

Black

Cladding in painted steel and majolica - Structure: steel and cast iron Combustion chamber: Steel, cast iron and vermiculite Heat input - reduced kW Heat output nominal - reduced kW Fuel / Hourly consumption at Nom. output - Red. output kg/h CO emission 13% O2 at Nom. output - Red. output % Dust emission PP at 13% O2 mg/m³ Fume outlet temperature at Nom. output - Red. output °C Efficiency at Nom. output - Red. output % Flue draught Pa Fume exhaust diameter mm Air inlet diameter mm Electrical power supply V Electrical power input W Min. safety distance (rear - right/left side - floor) mm Hopper capacity kg Weight kg Heatable volume* m³

780

293

9 - 2.54 8.13 - 2.34 1.86 - 0.52 0.006 - 0.012 13.9 - 8.9 160.8 - 83.4 90.32 - 92.34 10 - 14 80 50 230 V - 50 Hz - 2A 420 start - 100 200 - 300 - 0 15.5 110 232

*Depending on the insulation of the home and calculated on 35 W/m3

in extension phase

15a B-VG EN14785 BImSchV2

26

27


ALOE DUCTABLE dust emissions: 11.7 mg/m³ max efficiency: 91.42 % heat output: 9.29 kW heatable volume*: 145 m³

Ivory

Bordeaux

White

DE F R A E XE M P T 1076

Black

Cladding in painted steel - Top and front grilles in majolica - Structure: steel and cast iron Combustion chamber: Steel, cast iron and vermiculite kW 10.41-2.7 Heat input - reduced kW 9.29-2.58 Heat output nominal - reduced kg/h 2.20-0.57 Fuel / Hourly consumption at Nom. output - Red. output % 0.01-0.02 CO emission 13% O2 at Nom. output - Red. output mg/m³ 6.1-/ Dust emission PP at 13% O2 °C 182.2-80.2 Fume outlet temperature at Nom. output - Red. output % 89.26-95.66 Efficiency at Nom. output - Red. output Pa 10-14 Flue draught mm 80 Fume exhaust diameter mm 50 Air inlet diameter V 230V-50Hz-2A Electrical power supply W 420 START-120 Electrical power input mm 200-300-0 Min. safety distance (rear - right/left side - floor) kg 20 Hopper capacity kg 85 Weight m³ 265 Heatable volume*

734

548

*Depending on the insulation of the home and calculated on 35 W/m3

in extension phase

15a B-VG EN14785 BImSchV2

28

29


DIAMOND dust emissions: 6.1 mg/m³ max efficiency: 95.7 % heat output: 9.29 kW heatable volume*: 265 m³

Ivory

Bordeaux

541 White

D E F R A E XE M P T 1026

Black

7

Cladding in painted steel - Top in majolica - Structure: steel and cast iron Combustion chamber: Steel, cast iron and vermiculite Heat input - reduced kW 10.41 - 2.7 Heat output nominal - reduced kW 9.29 - 2.58 Fuel / Hourly consumption at Nom. output - Red. output kg/h 2.2 - 0.57 CO emission 13% O2 at Nom. output - Red. output % 0.01 - .002 Dust emission (15a-B-VG) at Nom. output mg/m³ 6.1 Fume outlet temperature at Nom. output - Red. output °C 182.2 - 80.2 Efficiency at Nom. output - Red. output % 89.26 - 95.7 Flue draught Pa 10 - 14 Fume exhaust diameter mm 80 Air inlet diameter mm 50 Electrical power supply V 230 V - 50 Hz - 2A Electrical power input W 420 start - 120 Min. safety distance (rear - right/left side - floor) mm 200 - 300 - 0 Hopper capacity kg 22 Weight kg 105 Heatable volume* m³ 265

551

*Depending on the insulation of the home and calculated on 35 W/m3

15a B-VG EN14785 BImSchV2

30

31


AURORA dust emissions: 6.1 mg/m³ max efficiency: 95.66 % heat output: 9.29 kW heatable volume*: 265 m³

Rust

Ivory

Bordeaux

White

D E F R A E XE M P T 994

GMA

Cladding in painted steel - Structure: steel and cast iron Combustion chamber: Steel, cast iron and vermiculite Heat input - reduced Heat output nominal - reduced Fuel / Hourly consumption at Nom. output - Red. output CO emission 13% O2 at Nom. output - Red. output Dust emission PP at 13% O2 Fume outlet temperature at Nom. output - Red. output Efficiency at Nom. output - Red. output Flue draught Fume exhaust diameter Air inlet diameter Electrical power supply Electrical power input Min. safety distance (rear - right/left side - floor) Hopper capacity Weight Heatable volume*

kW kW kg/h % mg/m³ °C % Pa mm mm V W mm kg kg m³

622

10.41 - 2.7 9.29 - 2.58 2.20 - 0.57 0.01 - 0.02 6.1 182.2 - 80.2 89.26 - 95.66 10 - 14 80 50 230 V - 50 Hz - 2A 420 start - 120 200 - 300 - 0 20 85 265

501

*Depending on the insulation of the home and calculated on 35 W/m³

in extension phase

15a B-VG EN14785 BImSchV2

32

33


FIRE HR dust emissions: 6.1 mg/m³ max efficiency: 95.66 % heat output: 9.29 kW heatable volume*: 265 m³

Ivory

531 Bordeaux

1036

Black

Cladding in painted steel - Top and front panel in majolica - Structure: steel and cast iron Combustion chamber: Steel, cast iron and vermiculite Heat input - reduced kW 10.41 - 2.7 Heat output nominal - reduced kW 9.29 - 2.58 Fuel / Hourly consumption at Nom. output - Red. output kg/h 2.2 - 0.57 CO emission 13% O2 at Nom. output - Red. output % 0.01 - 0.02 Dust emission (15a-B-VG) at Nom. output mg/m³ 6.1 Fume outlet temperature at Nom. output - Red. output °C 182.2 - 80.2 Efficiency at Nom. output - Red. output % 89.26-95.66 Flue draught Pa 10 - 14 Fume exhaust diameter mm 80 Air inlet diameter mm 50 Electrical power supply V 230 V - 50 Hz - 2A Electrical power input W 420 – start -120 Min. safety distance (rear - right/left side - floor) mm 200 - 300 - 0 Hopper capacity kg 19 Weight kg 106 Heatable volume* m³ 265

538

*Depending on the insulation of the home and calculated on 35 W/m3

15a B-VG EN14785 BImSchV2

34

35


CALLA DUCTABLE dust emissions: 10.7 mg/m³ max efficiency: 94.81 % heat output: 9.05 kW heatable volume*: 258 m³

Ivory

Bordeaux

White

Black

1075

Adjustable air flow 1 Centrif. fan mot. 2 Ducting

Cladding in painted steel and majolica - Top and front panel in majolica - Structure: steel and cast iron Combustion chamber: Steel, cast iron and vermiculite Heat input - reduced kW 10.01 - 2.68 Heat output nominal - reduced kW 9.05 - 2.54 Fuel / Hourly consumption at Nom. output - Red. output kg/h 2.073 - 0.555 CO emission 13% O2 at Nom. output - Red. output % 0.012 - 0.030 Dust emission PP at 13% O2 mg/m³ 10.7 - 26.1 Fume outlet temperature at Nom. output - Red. output °C 152.2 - 63.1 Efficiency at Nom. output - Red. output % 90.37 - 94.81 Flue draught Pa 10 - 14 Fume exhaust diameter mm 80 Air inlet diameter mm 50 Average air flow rate ** m³/h 80 x 2 Average air temperature ** °C 70 - 80 Electrical power supply V 230 V - 50 Hz - 2A Electrical power input W 420 start - 140 Min. safety distance (rear - right/left side - floor) mm 200 - 300 - 0 Hopper capacity kg 18 Weight kg 130 Heatable volume* m³ 258

570

535

*Depending on the insulation of the home and calculated on 35 W/m³ - ** At outlet of ducting connections

in extension phase

15a B-VG EN14785 BImSchV2

36

37


MIMOSA CORNER - DUCTABLE dust emissions: 10.7 mg/m³ max efficiency: 94.81 % heat output: 9.05 kW heatable volume*: 258 m³

Ivory

Bordeaux

White

683

Black

712

1071

Adjustable air flow 1 Centrif. fan mot. 2 Ducting

Cladding in painted steel - Structure: steel and cast iron - Combustion chamber: Steel, cast iron and vermiculite kW 10.01 - 2.68 Heat input - reduced kW 9.05 - 2.54 Heat output nominal - reduced kg/h 2.073 - 0.555 Fuel / Hourly consumption at Nom. output - Red. output % 0.012 - 0.030 CO emission 13% O2 at Nom. output - Red. output mg/m³ 10.7 - 26.1 Dust emission PP at 13% O2 °C 152.2 - 63.1 Fume outlet temperature at Nom. output - Red. output % 90.37 - 94.81 Efficiency at Nom. output - Red. output Pa 10 - 14 Flue draught mm 80 Fume exhaust diameter mm 50 Air inlet diameter m³/h 80 x 2 Average air flow rate ** °C 70 - 80 Average air temperature ** V 230 V - 50 Hz - 2A Electrical power supply W 420 start - 140 Electrical power input mm 200 - 300 - 0 Min. safety distance (rear - right/left side - floor) kg 16 Hopper capacity kg 115 Weight m³ 258 Heatable volume* *Depending on the insulation of the home and calculated on 35 W/m³ - ** At outlet of ducting connections

in extension phase

15a B-VG EN14785 BImSchV2

38

39


SPRINT STEEL DUCTABLE dust emissions: 18 mg/m³ max efficiency: 93.73 % heat output: 11.08 kW heatable volume*: 314 m³

Rust

Ivory

Bordeaux

White

993

Black

1007

Cladding in painted steel - Structure: steel and cast iron - Combustion chamber: Steel, cast iron and vermiculite Heat input - reduced kW 12.4 - 3.2 Heat output nominal - reduced kW 11.08 - 3.0 Fuel / Hourly consumption at Nom. output - Red. output kg/h 2.557 - 0.659 CO emission 13% O2 at Nom. output - Red. output % 0.016 - 0.02 Dust emission (15a-B-VG) at Nom. output mg/m³ 18 - 20 Fume outlet temperature at Nom. output - Red. output °C 199.6 - 71.8 Efficiency at Nom. output - Red. output % 89.03 - 93.73 Flue draught Pa 10 - 14 Fume exhaust diameter mm 80 Air inlet diameter mm 50 Average air flow rate *** m³/h 115 Average air temperature *** °C 70 - 75 Electrical power supply V 230 V - 50 Hz - 2A Electrical power input W 420 start - 140 Min. safety distance (rear - right/left side - floor) mm 200 - 300 - 0 Hopper capacity kg 15 Weight kg 132 Heatable volume* m³ 314

287

*Depending on the insulation of the home and calculated on 35 W/m³ - *** At outlet of ducting connections

40

Adjustable air flow 1 Centrif. fan mot. 1 Ducting

41

15a B-VG EN14785 BImSchV2


SPRINT MAJOLICA DUCTABLE dust emissions: 18 mg/m³ max efficiency: 93.73 % heat output: 11.08 kW heatable volume*: 314 m³

Ivory

Bordeaux

White

995

Adjustable air flow 1 Centrif. fan mot. 1 Ducting

Black

Cladding in majolica - Structure: steel and cast iron - Combustion chamber: Steel, cast iron and vermiculite Heat input - reduced kW 12.4 - 3.2 Heat output nominal - reduced kW 11.08 - 3.0 Fuel / Hourly consumption at Nom. output - Red. output kg/h 2.557 - 0.659 CO emission 13% O2 at Nom. output - Red. output % 0.016 - 0.02 Dust emission (15a-B-VG) at Nom. output mg/m³ 18 - 20 Fume outlet temperature at Nom. output - Red. output °C 199.6 - 71.8 Efficiency at Nom. output - Red. output % 89.03 - 93.73 Flue draught Pa 10 - 14 Fume exhaust diameter mm 80 Air inlet diameter mm 50 Average air flow rate ** m³/h 115 Average air temperature ** °C 70 - 75 Electrical power supply V 230 V - 50 Hz - 2A Electrical power input W 420 start - 140 Min. safety distance (rear - right/left side - floor) mm 200 - 300 - 0 Hopper capacity kg 15 Weight kg 156 Heatable volume* m³ 314

1000

1000

285

*Depending on the insulation of the home and calculated on 35 W/m³ - ** At outlet of ducting connections

15a B-VG EN14785 BImSchV2

42

43


MEDEA dust emissions: 10.7 mg/m³ max efficiency: 95.35 % heat output: 11.01 kW heatable volume*: 314 m³

Ivory

Bordeaux

White

1075

Black

564

Cladding in painted steel and majolica - Structure: steel and cast iron Combustion chamber: Steel, cast iron and vermiculite Heat input - reduced kW Heat output nominal - reduced kW Fuel / Hourly consumption at Nom. output - Red. output kg/h CO emission 13% O2 at Nom. output - Red. output % Dust emission PP at 13% O2 mg/m³ Fume outlet temperature at Nom. output - Red. output °C Efficiency at Nom. output - Red. output % Flue draught Pa Fume exhaust diameter mm Air inlet diameter mm Electrical power supply V Electrical power input W Min. safety distance (rear - right/left side - floor) mm Hopper capacity kg Weight kg Heatable volume* m³

537

*Depending on the insulation of the home and calculated on 35 W/m3

44

45

15a B-VG EN14785 BImSchV2

12.03 - 3.3 11.01 - 3.1 2.48 - 0.68 0.014 - 0.02 18 - 10.7 154.7 - 63.3 91.47 - 95.35 10 - 14 80 50 230 V - 50 Hz - 2A 420 start - 140 200 - 300 - 0 23 109 314


BEAUTY 13 DUCTABLE dust emissions: 16.4 mg/m³ max efficiency: 95.35 % heat output: 12.7 kW heatable volume*: 363 m³

Ivory

Bordeaux

570

Leather

1121

Black

Cladding in painted steel - Top and front grilles in majolica Structure: Steel and cast iron. - Combustion chamber: Steel, cast iron and vermiculite Heat input - reduced kW Heat output nominal - reduced kW Fuel / Hourly consumption at Nom. output - Red. output kg/h CO emission 13% O2 at Nom. output - Red. output % Dust emission (15a-B-VG) at Nom. output mg/m³ Fume outlet temperature at Nom. output - Red. output °C Efficiency at Nom. output - Red. output % Flue draught Pa Fume exhaust diameter mm Air inlet diameter mm Average air flow rate ** m³/h Average air temperature ** °C Electrical power supply V Electrical power input W Min. safety distance (rear - right/left side - floor) mm Hopper capacity kg Weight kg Heatable volume* m³

609

*Depending on the insulation of the home and calculated on 35 W/m³ - ** At outlet of ducting connections

46

47

15a B-VG EN14785 BImSchV2

Adjustable air flow 1 Centrif. fan mot. 2 Ducting

14.1 - 3.5 12.7 - 3.3 2.91 - 0.72 0.02 - 0.011 16.4 - 24.4 176.7 - 64.3 90 - 95.35 10 - 14 80 50 80 x 2 70 - 90 230 V - 50 Hz - 2A 420 – start -140 200 - 300 - 0 27 149 363


SABINA dust emissions: 8 mg/m³ max efficiency: 95 % heat output: 12.83 kW heatable volume*: 366 m³

Rust

Ivory

Bordeaux

527

958

Grey

Cladding in painted steel - Structure: Steel and cast iron Combustion chamber: Steel, cast iron and vermiculite Heat input - reduced Heat output nominal - reduced Fuel / Hourly consumption at Nom. output - Red. output CO emission 13% O2 at Nom. output - Red. output Dust emission (15a-B-VG) at Nom. output Fume outlet temperature at Nom. output - Red. output Efficiency at Nom. output - Red. output Flue draught Fume exhaust diameter Air inlet diameter Electrical power supply Electrical power input Min. safety distance (rear - right/left side - floor) Hopper capacity Weight Heatable volume*

kW kW kg/h % mg/m³ °C % Pa mm mm V W mm kg kg m³

629

14.38 - 3.85 12.83 - 3.66 3.04 - 0.81 0.01 - 0.01 8 202.5 - 86.7 89.25 - 95 10 - 14 80 50 230 V - 50 Hz - 2A 420 start-140 200 - 300 - 0 20 110 366

*Depending on the insulation of the home and calculated on 35 W/m3

15a B-VG EN14785 BImSchV2

48

49


CHARME dust emissions: 17.1-10.7 mg/m³ max efficiency: 95.35 % heat output: 12.72 kW heatable volume*: 363 m³

Ivory

Bordeaux

1091

White

Black

Cladding in majolica - Structure: steel and cast iron Combustion chamber: Steel, cast iron and vermiculite Heat input - reduced Heat output nominal - reduced Fuel / Hourly consumption at Nom. output - Red. output CO emission 13% O2 at Nom. output - Red. output Dust emission PP at 13% O2 Fume outlet temperature at Nom. output - Red. output Efficiency at Nom. output - Red. output Flue draught Fume exhaust diameter Air inlet diameter Electrical power supply Electrical power input Min. safety distance (rear - right/left side - floor) Hopper capacity Weight Heatable volume*

601 kW kW kg/h % mg/m³ °C % Pa mm mm V W mm kg kg m³

6

53

14,10-3,3 12,72-3,1 2,9-0,68 0,02-0,02 17,1-10,7 182,6-63,3 90,18-95,35 10-14 80 50 230-50Hz-2A 420-140 200-300-0 21 138 363

*Depending on the insulation of the home and calculated on 35 W/m3

15a B-VG EN14785 BImSchV2

50

51


CHARME DUCTABLE dust emissions: 16.4-24.1 mg/m³ max efficiency: 95.35 % heat output: 12.72 kW heatable volume*: 363 m³

Ivory

Bordeaux

1139

White

Black

Adjustable air flow 2 Centrif. fan mot. 2 Ducting

601

Cladding in majolica - Structure: steel and cast iron - Camera di combustione: Acciaio, ghisa e vermiculite Heat input - reduced kW 14,10-3,3 Heat output nominal - reduced kW 12,72-3,1 Fuel / Hourly consumption at Nom. output - Red. output kg/h 2,9-0,72 CO emission 13% O2 at Nom. output - Red. output % 0,02-0,011 Dust emission PP at 13% O2 mg/m³ 16,4-24,1 Fume outlet temperature at Nom. output - Red. output °C 176,7-64,3 Efficiency at Nom. output - Red. output % 90-95,35 Flue draught Pa 10-14 Fume exhaust diameter mm 80 Air inlet diameter mm 50 Average air flow rate ** m³/h 160 x 2 Average air temperature ** °C 70-90 Electrical power supply V 230-50Hz-2A Electrical power input W 420-260 Min. safety distance (rear - right/left side - floor) mm 200-300-0 Hopper capacity kg 25 Weight kg 156 Heatable volume* m³ 363

6

53

*Depending on the insulation of the home and calculated on 35 W/m³ - ** At outlet of ducting connections

15a B-VG EN14785 BImSchV2

52

53


REMOVABLE PELLET INSERTS Top Fire 70 -Top Fire 80 - Top Fire 70 Slim

Suitable for installing in any fireplace, COLA pellet inserts feature an advanced operation technology that makes them a perfect heat source. The inserts combine the typical advantages of pellet stoves (high caloric efficiency, programmability, limited costs, environmental friendliness) with the charm and warmth of a traditional fireplace. Removable, equipped with glass ceramic resistant to high temperatures, and frontal forced ventilation, it can be customised with frames in various shapes and materials. NB: The heatable volume depends on the insulation of the home. Calculated on 35 W/mÂł - 30 kcal/h mÂł; consumption values are the result of laboratory tests

54

55


TOP FIRE 70 SLIM

TOP FIRE 70

TOP FIRE 80

ACCESSORIES

dust emissions: 7.1 mg/m³ max efficiency: 93.34 % heat output: 8.62 kW heatable volume*: 246 m³

dust emissions: 14.30 mg/m³ max efficiency: 93.73 % heat output: 10.36 kW heatable volume*: 296 m³

dust emissions: 14.30 mg/m³ max efficiency: 93.73 % heat output: 10.36 kW heatable volume*:296 m³

700

0

47

665

584

520

Frame kit base mounting frames customizable

700

7

53

TOP FIRE 70 SLIM Structure: Steel and cast iron Combustion chamber: Steel, cast iron and vermiculite Heat input - reduced Heat output nominal - reduced Fuel / Hourly consumption at Nom. output - Red. output CO emission 13% O2 at Nom. output - Red. output Dust emission PP at 13% O2 Fume outlet temperature at Nom. output - Red. output Efficiency at Nom. output - Red. output Flue draught Fume exhaust diameter Air inlet diameter Electrical power supply Electrical power input Min. safety distance (rear - right/left side - floor) Hopper capacity Weight Heatable volume*

kW kW kg/h % mg/m³ °C % Pa mm mm V W mm kg kg m³

9,57-2,27 8,62-2,12 1,98-0,47 0,003-0,020 12,3-7,1 159,20-67,30 90,12-93,34 10-14 80 50 230 V - 50 Hz 420 start-140 200-200-200 12 85 246

800

TOP FIRE 70

11,58-3,32 10,36-3,11 2,39-0,68 0,005-0,008 14,30-20,4 185,20-73 89,41-93,73 10-14 80 50 230 V - 50 Hz 420 start-140 200-200-200 18 98 295

6

53

TOP FIRE 80 Ll13b00y Top fire 80 Kit drawer front load Kit additional base

11,58-3,32 10,36-3,11 2,39-0,68 0,005-0,008 14,30-20,4 185,20-73 89,41-93,73 10-14 80 50 230 V - 50 Hz 420 start-140 200-200-200 18 105 295

Ll13a00y Top fire 70 Kit complete frame 120 Kit additional base

*Depending on the insulation of the home and calculated on 35 W/m3

15a B-VG EN14785 BImSchV2

56

LL13C00Y Top fire 70 slim Kit complete frame 80 Kit additional base

57


PELLET HYDRO STOVES System Kit Termo Perla Plus Termo Charme Plus Termo Blitz Plus Energyca / Energyca 30 Energyca 30S Termo Plus Aqua Plus

» 60 » 62 » 64 » 66 » 68 » 70 » 72 » 74

With these stoves the advantages of pellets and a "water" combustion chamber go hand in hand with great operating autonomy, better heat exchange with higher efficiency plus the possibility of being directly connected to the heating system, in addition to or in place of the existing boiler. The plumbing connections and the control and safety devices are easy to access and service. The main features of COLA pellet heating stoves are: -- Cast iron brazier, fire door with frame in cast iron and self-cleaning panoramic glass ceramic -- Large heat exchange area on heating chamber -- Automatic brazier cleaning to keep combustion constant and for low maintenance -- Automatic lighting and shutdown by weekly chronothermostat function with up to 4 lightings/ shutdowns a day -- Alarm diagnostics and easy service -- Management in up to 3 foreign languages as well as the Italian version -- Ample glass area for better visibility of flame -- Possibility of connection to thermostat/external chronothermostat with cable -- Removable ash pan -- Adjustable feet on bottom of stove to facilitate installation also on uneven floors -- Heating water circuit comprising: circulating pump with non-return valve with union, 3 bar safety valve, pressure transducer, system drain cock, membrane expansion tank and heating water delivery and return connections -- Group B DHW circuit for external boiler comprising circulating pump with non-return valve with union, heating water circuit connection pipes and delivery and return connections for boiler coil (optional - excluding Termo Max) -- Telephone connection via GSM module (optional) -- Safety systems: overpressure valve incorporated in the cast iron upper exchanger, overtemperature safety thermostat, pellet hopper and low pressure gauge to ensure safe stove operation -- Unit for domestic hot water production with storage (optional termo power - termo power lux)

NB: The heatable volume depends on the insulation of the home. Calculated on 35 W/m³ - 30 kcal/h m³; consumption values are the result of laboratory tests

58

59


SYSTEM KIT MS 10-35 and MSS 10-35 are the Cola separation modules necessary for combined systems having various energy sources (pellets, gas, other sources) which exceed 35 kW and hydraulically separate two different circuits of a system. In fact, they are mandatory for the document ISPESL 18/09/2006 which states "if the primary heat transfer fluid of two generators enters the thermal storage without any separating element, the sum of the capacity is considered and therefore, if the value of 35 kW is exceeded, the system comes under the requirements of Min. Decree 1/12/1975 "Safety standards for equipment containing hot liquids under pressure", therefore placing a heat exchanger between the two generators creates a hydraulic interruption and the outputs must not be added together". Therefore Cola modules MS 10-35 and MSS 10-35 do not require the compiling of REPORT R (regarding the safety of equipment containing hot liquids under pressure), which is mandatory when the nominal output of the generators exceeds 35 kW: in fact, according to the current regulations, thermal systems fueled by biomass must undergo a number of authorisations and administrative procedures (such as prior notification, building permit, etc.). The modules are positioned near the unit (pellet stove or boiler) which has a useful heat output to water of between 10 and 35 kW. The modules have an electro-galvanised sheet frame and painted steel cover for easy assembly, to ensure optimum accessibility to the internal components in case of maintenance. A maximum operating temperature of 80°C and a maximum secondary side operating pressure of 6 bar are assured. The modules consist of two circuits: a primary circuit (connected to a pellet heating stove/boiler), and a secondary circuit that interfaces with another energy source. The MS 10-35 is the basic module for separation of the circuits, whereas the MSS 10-35 is the module which, in addition to the separation function, integrates the DHW circuit

function (for boiler or plate heat exchanger). The primary side of the MS 10-35 module comprises: 3⁄4” connections, manual vent valve and heat exchanger with 30 plates, whereas the secondary side comprises 3⁄4” connections, low consumption 3-speed circulating pump, non-return valve and manual vent valve. The primary side of the MSS 10-35 module comprises: 3⁄4” connections, 3-way ball valve, manual vent valve and heat exchanger with 30 plates, whereas the secondary side comprises 3⁄4” connections, low consumption 3-speed circulating pump, non-return valve and manual vent valve. The low consumption 3-speed circulating pump on the secondary circuit (for both modules) and the 3-way valve for DHW option (only for module MSS 10-35) can be managed directly by the electronic controller of the pellet heating stove and/or boiler. Also, the modules can be provided with an ANTICONDENSATION Accessory Kit that raises the return temperature in the primary circuit. With this accessory kit, through a 3-way thermal valve the system bypasses the primary circuit fluid delivery (pellet stove/boiler) in the primary circuit return until the delivery reaches the preset temperature in the valve. At this point the thermal valve (proportionally) closes the bypass and opens the return, thus allowing total circulation of the fluid. This allows the pellet stove/ boiler to quickly reach the optimum working temperature, preventing damage from smoke or soot in the flues and eliminating the problem of condensate in the unit.

MODULE MS 10-35

MODULE MSS 10-35

ANTICONDENSATION ACCESSORY


TERMO PERLA PLUS dust emissions: <17 mg/m³ max efficiency: 97.41 % heat output: 20.92 kW heatable volume*: 517 m³

Ivory

Bordeaux

White

609

609

1121

Black

Cladding in painted steel - Top and front grilles in majolica - Structure: Steel, cast iron and majolica Combustion chamber: Steel kW Max heat input - reduced 22.9-5.6 kW Heat output nominal - reduced 20.92-5.46 kW Heat output to air at Nom. output - Red. output 2.82-1.13 kW Heat output to water at Nom. output - Red. output 18.1-4.33 kg/h Fuel / Hourly consumption at Nom. output - Red. output 4.8-1.15 % CO emission 13% O2 at Nom. output - Red. output 0.01-0.047 mg/m³ Dust emission (15a-B-VG) at Nom. output - Red. output <17-36.4 °C Fume outlet temperature at Nom. output - Red. output 125.2-55.6 % Efficiency at Nom. output - Red. output <91-97.41 Pa Flue draught 10-14 mm Fume exhaust diameter 80 mm Air inlet diameter 50 V Electrical power supply 230 V - 85 Hz W Electrical power input 420 start-85 mm Min. safety distance (rear - right/left side - floor) 200-200-0 kg Hopper capacity 27 lt Heating chamber capacity 18.5 kg Weight 155 m³ Max. heatable volume* 517 *Depending on the insulation of the home and calculated on 35 W/m3

62

63

15a B-VG EN14785 BImSchV2


TERMO CHARME PLUS dust emissions: <17 mg/m³ max efficiency: 97.41 % heat output: 20.92 kW heatable volume*: 517 m³

Ivory

Bordeaux

1092

White

Black

Cladding in painted steel - Structure: Steel, cast iron and majolica Combustion chamber: Steel Max heat input - reduced kW Heat output nominal - reduced kW Heat output to air at Nom. output - Red. output kW Heat output to water at Nom. output - Red. output kW Fuel / Hourly consumption at Nom. output - Red. output kg/h CO emission 13% O2 at Nom. output - Red. output % Dust emission (15a-B-VG) at Nom. output - Red. output mg/m³ Fume outlet temperature at Nom. output - Red. output °C Efficiency at Nom. output - Red. output % Flue draught Pa Fume exhaust diameter mm Air inlet diameter mm Electrical power supply V Electrical power input W Min. safety distance (rear - right/left side - floor) mm Hopper capacity kg Heating chamber capacity lt Weight kg Max. heatable volume* m³

600

8

54

22.9-5.6 20.92-5.46 2.82-1.13 18.1-4.33 4.8-1.15 0.01-0.047 <17-36.4 125.2-55.6 <91-97.41 10-14 80 50 230 V - 50 Hz 420 start-85 200-200-0 24 18.5 177 517

*Depending on the insulation of the home and calculated on 35 W/m3

15a B-VG EN14785 BImSchV2

64

65


TERMO BLITZ PLUS CORNER dust emissions: <17 mg/m³ max efficiency: 97.41 % heat output: 20.92 kW heatable volume*: 517 m³

Ivory

Bordeaux

54

9

1035

Leather

Cladding in ceramic - Structure: Steel, cast iron and majolica Combustion chamber: Steel Max heat input - reduced kW Heat output nominal - reduced kW Heat output to air at Nom. output - Red. output kW Heat output to water at Nom. output - Red. output kW Fuel / Hourly consumption at Nom. output - Red. output kg/h CO emission 13% O2 at Nom. output - Red. output % Dust emission (15a-B-VG) at Nom. output - Red. output mg/m³ Fume outlet temperature at Nom. output - Red. output °C Efficiency at Nom. output - Red. output % Flue draught Pa Fume exhaust diameter mm Air inlet diameter mm Electrical power supply V Electrical power input W Min. safety distance (rear - right/left side - floor) mm Hopper capacity kg Heating chamber capacity lt Weight kg Max. heatable volume* m³

22.9-5.6 20.92-5.46 2.82-1.13 18.1-4.33 4.8-1.15 0.01-0.047 <17-36.4 125.2-55.6 <91-97.41 10-14 80 50 230 V - 50 Hz 420 start-85 200-200-0 20 18.5 150 517

771

680

*Depending on the insulation of the home and calculated on 35 W/m3

15a B-VG EN14785 BImSchV2

66

67


ENERGYCA ENERGYCA 30 dust emissions: 10.8-10.6 mg/m³ max efficiency: 94.7% - 94.7 % heat output: 23.5 kW - 28.6 kW heatable volume*: 574 - 686 m³

GMA

Bordeaux Vin

1245

White

Cladding in painted steel - Structure: steel and cast iron Combustion chamber: Steel, cast iron and vermiculite Max heat input - reduced Heat output nominal - reduced Heat output to air at Nom. output - Red. output Heat output to water at Nom. output - Red. output Fuel / Hourly consumption at Nom. output - Red. output CO emission 13% O2 at Nom. output - Red. output Dust emission (15a-B-VG) at Nom. output - Red. output Fume outlet temperature at Nom. output - Red. output Efficiency at Nom. output - Red. output Flue draught Fume exhaust diameter Air inlet diameter Electrical power supply Electrical power input Min. safety distance (rear - right/left side - floor) Hopper capacity Heating chamber capacity Weight Max. heatable volume*

Energyca 24,63-7,25 23,5-6,86 3,4-1,07 20,1-5,8 5,1-1,49 0,005-0,019 10,8-24,3 119,3-77,1 93,6-94,7 10-14 100 50 230 V - 50 Hz 420 start-140 200-200-0 48 23 210 574

15a B-VG EN14785 BImSchV2

645

Energyca 30 30,12-7,25 28-6,86 4-1,07 24-5,8 6,12-1,49 0,01-0,019 10,6-24,3 141,5-77,1 93,12-94,7 10-14 100 50 230 V - 50 Hz 420 start-140 200-200-0 48 23 211 686

68

8

62

69


ENERGYCA 30 S dust emissions: 10.6 mg/m³ max efficiency: 94.7 % heat output: 28.6 kW heatable volume*: 686 m³

GMA

Bordeaux Vin

1245

White

654

Cladding in painted steel - Structure: steel and cast iron Combustion chamber: Steel, cast iron and vermiculite Max heat input - reduced Heat output nominal - reduced Heat output to air at Nom. output - Red. output Heat output to water at Nom. output - Red. output Fuel / Hourly consumption at Nom. output - Red. output CO emission 13% O2 at Nom. output - Red. output Dust emission (15a-B-VG) at Nom. output - Red. output Fume outlet temperature at Nom. output - Red. output Efficiency at Nom. output - Red. output Flue draught Fume exhaust diameter Air inlet diameter Electrical power supply Electrical power input Min. safety distance (rear - right/left side - floor) Hopper capacity Heating chamber capacity Weight Max. heatable volume*

8

62

kW kW kW kW kg/h % mg/m³ °C % Pa mm mm V W mm kg lt kg m³

*Depending on the insulation of the home and calculated on 35 W/m3

70

71

15a B-VG EN14785 BImSchV2

30,12-7,25 28-6,86 4-1,07 24-5,8 6,12-1,49 0,01-0,019 10,6-24,3 141,5-77,1 93,12-94,7 10-14 100 50 230 V - 50 Hz 420 start-140 200-200-0 48 23 212 686


TERMO PLUS 18 TERMO PLUS 23 dust emissions: < 16 mg/m³ max efficiency: > 91 % heat output: 18.1 - 23.3 kW heatable volume*: 574 m³

1000

White

TERMO PLUS 18 TERMO PLUS 23 610

20

Cladding in painted steel - Structure: steel and cast iron Combustion chamber: Steel Max heat input - reduced kW Heat output nominal - reduced kW Heat output to air at Nom. output - Red. output kW Heat output to water at Nom. output - Red. output kW Fuel / Hourly consumption at Nom. output - Red. output kg/h CO emission 13% O2 at Nom. output - Red. output % Dust emission (15a-B-VG) at Nom. output - Red. output mg/m³ Fume outlet temperature at Nom. output - Red. output °C Efficiency at Nom. output - Red. output % Flue draught Pa Fume exhaust diameter mm Air inlet diameter mm Electrical power supply V Electrical power input W Min. safety distance (rear - right/left side - floor) mm Hopper capacity kg Heating chamber capacity lt Weight kg Max. heatable volume* m³

0/8

70

19,37-5,6 18,1-5,46 1,1-0,76 17-4,7 4,1-1,22 < 0,015 < 16 < 135 > 93 10-14 80 50 230 V - 50 Hz 440 start-85 200-200-0 30 18,5 155 485

*Depending on the insulation of the home and calculated on 35 W/m3

in extension phase

72

73

15a B-VG EN14785 BImSchV2

25,5 23,3-5,8 3,2-1,2 20,1-4,6 5,24-1,22 < 0,015 < 16 < 140 > 91 10-14 80 50 230 V - 50 Hz 440 start-85 500-500-0 40 23 175 574


AQUA PLUS 18 AQUA PLUS 23 dust emissions: < 16 mg/m³ max efficiency: > 91 % heat output: 18.1 kW - 23.3 kW heatable volume*: 574 m³

1430

White

AQUA PLUS 18 610

Cladding in painted steel - Structure: steel and cast iron Combustion chamber: Steel Max heat input - reduced kW Heat output nominal - reduced kW Heat output to air at Nom. output - Red. output kW Heat output to water at Nom. output - Red. output kW Fuel / Hourly consumption at Nom. output - Red. output kg/h CO emission 13% O2 at Nom. output - Red. output % Dust emission (15a-B-VG) at Nom. output - Red. output mg/m³ Fume outlet temperature at Nom. output - Red. output °C Efficiency at Nom. output - Red. output % Flue draught Pa Fume exhaust diameter mm Air inlet diameter mm Electrical power supply V Electrical power input W Min. safety distance (rear - right/left side - floor) mm Hopper capacity kg Heating chamber capacity lt Weight kg Max. heatable volume* m³

0

82

19,37-5,6 18,1-5,46 1,1-0,76 17-4,7 4,1-1,22 < 0,015 < 16 < 135 > 93 10-14 80 50 230 V - 50 Hz 440 start-85 200-200-0 30 18,5 190 485

*Depending on the insulation of the home and calculated on 35 W/m3

in extension phase

74

75

15a B-VG EN14785 BImSchV2

AQUA PLUS 23

25,5-6,37 23,3-5,8 3,2-1,2 20,1-4,6 5,24-1,22 < 0,015 < 16 < 140 > 91 10-14 80 50 230 V - 50 Hz 440 start-85 200-200-0 40 23 210 574


BIOMASS PELLET BOILER Domus Fire » 78

76

77


DOMUS FIRE - Design Essential, Attractive and Compact

COMBUSTION CHAMBER - Large surface area heat exchanger for maximum efficiency

Every little detail has been carefully and stylishly designed:

• Large volume flue gas reversal collectors for uniform temperature and speed • Extremely low emissions thanks to accurately calibrated combustion and vermiculite combustion chamber walls (NEW!!) • Turbulators for reduced flue gas speed and more efficient heat exchange • Combustion chamber with fully water-jacketed front face (NEW!!) to eliminate thermal stress between combustion parts and external panels • Combustion chamber with fully insulated top (hottest) section (NEW!!); latest generation insulation prevents heat loss to outside • Stable and rigid mounting thanks to built-in base and thick steel panels • Two inspection doors with closure adjustment brackets (NEW!!): 1. Fire door with flame viewing window 2. Ash bin door for removing and emptying the large ash bin, complete with overpressure safety valve for protection against explosion and/or flameback • Fully inspectable: in addition to the inspection doors, the flue gas collectors can also be inspected: 1. at the bottom, through the side and centre plugs 2. at the top, by removing the cover panel

• The door handle lies flush with the front panel • The thermally insulated top and side panels have no visible screws • The turbulator shaker knobs are partly hidden Thermal insulation of the casing panels limits heat loss and keeps external surfaces cool. DOMUSFIRE BOILERS incorporate a large capacity pellet hopper (70 kg for models HR C29-HR C35-HR C39 and 50 kg for models HR C17-HR C24). Domusfire boilers come with provision for connection to an ad-ditional, 250 kg hopper with level sensor for automatic filling.

Model HR C17-HR C24 (580x700x1300)

Detectors stat Information display

Backlit LCD display

Model HR C29-HR C35-HR C39 (700x700x1300)

In the upper front panel are the control panel (mod.EVO) and the temperature gauge to display at every moment the state of operation of the boiler, the temperature and the pressure of the water.

Setting buttons and selection

Setting buttons

Power ON/Selection button

IR receiver

78

15a B-VG EN 303-5 BImSchV2

79


HYDRAULIC SYSTEM - Important innovations

BURNER - Comprising:

• External water circuit air vent • External water circuit drain cock • Adjustment of speed of pumps from the outside • The normal operation and basic maintenance of the water circuit in Cola boilers is extremely quick and easy. There is no need to re move casing panels as all devices are accessible from the outside. Cola boilers also have provision for connection to a second boiler with pump, a passive storage cylinder or a storage cylinder with plate heat exchanger.

• Firebox designed for optimum distribution of primary and secondary air, with angled vertical mini-collectors (NEW!!) • Large, perforated, cast iron grate • Large diameter air inlet with flow meter

Innovation In implementation of Directive 2005/32/EC, regulating the “design specifications of circulating pumps”, Cola, which is always at the forefront in improving its technology, has already introduced in the production of the DOMUSFIRE BOILER the ENERGY-SAVING SMART PUMP (i.e. A CIRCULATING PUMP FEATURING HIGH ENERGY EFFICIENCY AND LOW POWER CONSUMPTION tested and certified by an accredited laboratory) whose rotor is directly coupled to the turbine and immersed in the liquid being pumped (circulating pump without stuffing box).

FLUE GAS EXHAUST - Comprising:

Advantages:

• 100 mm diameter pipe (NEW!!) • Cast iron coil on back wall of combustion chamber (NEW!!) • More powerful, 180 mm diameter extractor fan (NEW!!)

• To clean the thermally insulated top section of the boiler, simply lift off the top panel (which is held in place by simple clips - no screws To clean the bottom section, simply open the ash bin door and remove the ash bin • and central plug. There is no need to remove the side panels • The heating system pumps have direct access from the outside for adjusting the speed The flue gas extractor can be removed easily, through the central panel on the rear • of the boiler • The electrical and electronic component box can be removed and replaced without having to remove the side panel.

Rear view Mod. HR C17 Mod. HR C24

1

1

Rear view Mod. HR C29 Mod. HR C35 Mod. HR C39

1

External water circuit air vent

2

External water circuit drain cock

3

External access for pump maintenance and speed adjustment

3

4

Flue gas exhaust

4

3 4

Board on outer side to facilitate connections and maintenance

2

80

The boiler is designed so that the additional, 250 kg pellet hopper which gives many hours of autonomy, can be positioned on either side.

2

81


M

H

Steel Steel

359

kW

1300 219

L

D

O 323

E F A

121

P

52

P

79

43

A Power cable connection B Overpressure water discharge (1/2” F - 3 bar) C Heating system return (1” M) D Combustion air inlet ø 60 mm E Water supply connection (1/2” F) F System water drain G System air drain H Connection - delivery without pump (1” M) I Delivery pump inspection J Heating system delivery (1” M) L Fume exhaust pipe connection Ø 100 mm M Pressure/temperature gauge N Control panel model EVO O Door to access fire door and ash box P Adjustable feet Q Pellet hopper door R Turbulator shaker knob

S

Q

U

T

698

R

R

172

243

50

60 60

V

60 60

DETTAGLIO A

580

Model HR C17 - HR C24 M

G

N

359

H

A

J

117

L

239

1300

I

OPTIONAL ELEMENTS

23,2

29

34,4

38,3

16,2-4,2

22-4,2

27,4-5,78

32,4-5,78

34,9-5,78

3,5-0,91

4,8-0,91

6,0-1,32

7,1-1,32

7,9-1,32

CO emissions (10% O ) at Hnom - Hred

%

0,011-0,032

0,007-0,023

0,004-0,029

0,007-0,040

0,006-0,029

Dust emissions (13% O2) at Hnom - Hred

%

17,3-18,5

16,2-18,5

17,6-6,9

17,2-6,9

17,8-6,9

Flue gas exhaust temperature ) at Hnom - Hred

°C

102,8-53,8

128,1-53,8

134,3-62,6

148,6-62,6

159,5-62,6

Efficiency ) at Hnom - Hred

%

95,68-95,09

94,54-95,09

94,45-90,14

94,18-90,14

91,32-90,14

Flue draught

Pa

10-14

10-14

10-14

10-14

10-14

Flue gas exhaust diameter

mm

100

100

100

100

100

Power supply

230 V - 50Hz

Power consumption

456-105/90

Hopper capacity

kg

Water heating chamber capacity Weight Dimensions

476-160/105

48

48

68

68

D 303

E F A 88

69

82

160

P

P

S

l

25

25

30

30

30

230

230

272

275

275

HxWxD

1300x580x698

1300x700x698

OPTIONAL SUPPLEMENTARY HOPPER CAPACITY: ABOUT 250 kg

1

POWER ON LEAD BOILER OPERATOR THE TANK MAY BE PLACED ON THE LEFT OR RIGHT THE BOILER

2

1

Gearmotor

Q

6

698

60 60

3

2

7

3

Spacer tube boiler-tank

4

Cover protective gearmotor

W Z

4

Protective gearmotor

V 172 50

244

5

S OPT DHW delivery pump inspection T OPT DHW return (3/4” pump) U OPT DHW delivery (3/4” M pump) V DHW overpressure water discharge (1/2” F 6 bar) W OPT DHW return (1/2” M exchanger) Z OPT DHW delivery (1/2” M exchanger)

U

T

68

kg

B C

HR C39

kW

2

C

17

HR C35

kg/h pellets

Fuel / hourly consumption at Hnom - Hred

117

J

HR C29

Combustion chamber Heat output water [Hnom] - [Hred]

B

HR C24

Body Heat output

I A

HR C17

MODEL

N G

R

5

R

Pellet loading door 60 60 99

DETTAGLIO A

700

Model HR C29 - HR C35 - HR C39 82

7

6

Adjustable feet

7

Distance below the boiler tank

83


MAIN COMPONENTS

ACCESSORIES DESCRIPTION

EN 303-5 15

3 10

4

11 12

14 1

18

5

16 8 9

17 2 13 21

7 6

20

19 22

84

EN 303-5 provides an increasing efficiency class 1 to 5. Domusfire is in class 5.

1 Electro-welded steel water heating chamber 2 Flue gas-water heat exchange tubes 3 Turbulator shaker rod 4 Insulated cover for water heating chamber 5 Thermally insulated fire door with flame viewing window 6 Large ash bin 7 Overpressure safety valve 8 Firebox with mini-collectors for secondary air 9 Cast iron grate 10 Pull-out electrical and electronic component box 11 Temperature and pressure gauge 12 Temperature and pressure gauge and control panel faceplate 13 Primary air inlet with flow meter 14 Pellet hopper with protective grille 15 Pellet hopper filling panel 16 Pellet chute 17 Pellet feed screw gear motor 18 Pellet feed screw 19 Thermally insulated side panel 20 Thermally insulated front door 21 Central heating circuit expansion vessel 22 One-piece base with water heating chamber and 4 adjustable feet

IMAGE

PART NO. DOMUSFIRE HR C17

DOMUSFIRE HR C24

DOMUSFIRE HR C29

DHW assembly with pump inside the boiler

L9LA100A

DHW assembly with pump and heat exchanger inside the boiler

L9LA110A

Motorised, 3-way ball valve, 1” G male

599001320

Thermal safety valve, 2x3/4” G female Calibrated for 95°C, 1/2” sensor socket

599001540

Anti-condensation valve, DN20 3x1” G male Calibrated for 45°C

599001550

Filling assembly with pressure gauge and calibration indicator, 2x1/2” G F-M

599001560

Wireless ON/OFF timer-thermostat

599001490

DOMUSFIRE HR C35

DOMUSFIRE HR C39

85


Cola Stoves UK, Lichfield Road, Branston Industrial Estate, Burton-upon-Trent, Staffordshire, DE14 3HD Tel. 0330 205 0002 â&#x20AC;&#x201C; sales@colastoves.co.uk â&#x20AC;&#x201C; www.colastoves.co.uk

Cola Stoves Customer Brochure 2017  
Read more
Read more
Similar to
Popular now
Just for you