RE-THINKING CONSTRUCTION WITH FREE-FLOWING INSULATION
transform your build with injected insulation for walls and floors
The energystore superbead system is an injected expanded polystyrene (EPS) bead bonded with an adhesive designed for use in multiple cavity wall scenarios including Masonry, Party Wall and Timber Frame.
The system has been patented (Patent no.EP4079990) for use underneath Beam + Block floors.
insulatE walls and floors in one visit
EXCELLENT THERMAL PERFORMANCE
*
Declared thermal conductivity of 0.033 W/mK.
*Compared to traditional methods
EPS bead insulation that can be installed in cavity, party wall and Beam + Block floors in one visit.
*when using all superbead systems and compared to traditional methods.
Exact amount of energystore superbead® needed is poured on-site leaving no insulation offcuts or waste for you to deal with.
Using closed cell EPS technology, energystore superbead does not absorb moisture. *BS EN 1609, WS (doesn’t exceed 1.0kg/m2)
WE DELIVER +INSTALL MOISTURE RESISTANT SYSTEM
Our in house contracting division can supply and install our products giving enhanced levels of quality assurance.
The energystore superbead® system is an injected expanded polystyrene (EPS) bead bonded with an adhesive.
Party Wall
Timber Frame
GLEN MANOR DEVELOPMENT BEATTIE PASSIVE
“We’ve been working with energystore for over 10 years so superbead was a natural choice for our Glen Manor Development. It consists of residential units with a mix of 3-4 bed detached and semi-detached houses. With energystore we knew we’d get excellent thermal performance along with ease of installation resulting in value for money. We work with energystore because of their professionalism and focus on quality. Aspects we find important are their helpfulness with advice, arriving to site when programmed to do so, carrying out the installation in a professional manner and following up with the relevant certificates to satisfy building control. Altogether offering a great package. We look forward to continuing to work with energystore.”
“We got in touch with Energystore after seeing them on LinkedIn. After some initial conversations with their team we tried using Energystore in both our factory and on-site. Their customer service and quality EPS bead has meant we are looking to use them on all our projects. It’s been great to be able to recommend Enerygstore to our partners knowing that they will all receive the same great customer service that we are already experiencing. We are currently undertaking training to be able to install the Superbead ourselves at our factory in Norwich. Cliff and Sandy have been extremely helpful in organising this, working closely with our team to ensure it’s a success.”
Martin Taylor | Antrim Construction
Beattie Passive Nathan Beattie, Commercial Director
*
BEAM + BLOCK
Reduce floor depth and improve thermal performance
Superbead* has many advantages for your build which save time and resources on your programme. Designed for maximum efficiency, the bespoke system can also improve U-Values for the floor and create optimised performance for the U-Values and Psi Values.
BEAM + BLOCK STEPS TO INSTALL
Masonry Party Wall
A high performance full-fill insulation solution* suitable for both residential and commercial construction.
EPS bead insulation with Robust Details for masonry construction satisfying Part E of building regulations enabling a single product to be used within the cavity and the party wall.
Timber Frame on-site Timber Frame OFF-site
EPS bead insulation approved for use in Timber Frame.
No storage, no waste
Resistance to Fire tests have been performed for several loadbearing timber frame build ups. Classifications include REI30 and REI45. For full specification, contact our technical team.
As well as installing on-site, energystore superbead®:
Timber Frame is also used in off-site manufacturing.
Our technical team have designed manual and automated solutions for use in off-site manufacturing (OSM).
FAST INSTALL
Fast, efficient install * 2
Choice of automated and semi-automated OSM solutions can fill panels in as little as 2 minutes.
NO SLUMP IN TRANSIT
The environmental impact of energystore superbead’s manufacture, transport and installation has been independently assessed by Sustainable Homes - Lifecycle Assessment.
76% of superbead emissions are from raw material processing. This is equal to 31kg of carbon emissions for each 12kg cube of EPS produced.
5 Months of Payback Time. 5 2% Raw Material Transport of emissions are from raw material transport. The transportation of each 12kg cube of EPS results in 0.9kg carbon emissions on average.
After installation in an average 3-bed home it takes approximately 5 months for superbead to save as much carbon as is released during production and transport.
17% Manufacturing Process of emissions are from manufacturing in energystore’s factories, or 7.1kg carbon emissions per cube.
5% superbead Installation of emissions are from distribution of the superbead product for installation. This results in 2.1kg carbon per cube.
“Compared to other insulation, superbead had the lowest embodied emissions per functional unit.”
The energystore technical department are members of the Elmhurst Energy U-Value Competency Scheme. If you require a project-specific U-Value calculation, please get in touch at superbead@energystoreltd.com
Bridging Calculations
Ψ (psi) values are becoming increasingly important in meeting compliance with building regulations. In modern buildings junction heat loss can account for up to 30% of total heat loss.
The energystore technical team can produce project-specific 3D thermal modelling in accordance with BR 497, producing accurate Ψ values which can lead to enhanced thermal performance of junction details and greater flexibility in meeting building regulation’s energy efficiency requirements.
energystore offer a range of certified CPD and factory tours to help support architects in meeting their annual CPD requirements. Our CPD courses focus on the principles of good-quality insulation and common on-site pitfalls that can reduce insulation effectiveness.
Please get in touch with the energystore technical team to arrange a free CPD (See details below). SAP calculations are available when you spec any energystore superbead system. Technical enquiries
Call +44 (0) 800 086 6687 Sales enquiries
T&C’s: