Residential Housing at Kinsealy Lane
Malahide
A selection of impressive large detached residences situated in Kinsealy, on the outskirts of Malahide. energystore TLA® 200 Grade was used for this project as a replacement for the traditional concrete sub-floor.
Superior Floor screed installed energystore TLA® and 48 hours the underfloor heating was installed. The compacted concrete layer was then applied another 48 hours making the floor solution completely finished in the space of a week.
Project Details
Project Start August 2024
Main Contractor Jeremy Ennis Developments
Installer Superior Floor Screed
Product Grade TLA200 Grade
““As a property developer, efficiency is key, and TLA floor insulation has truly exceeded my expectations. The speed of installation was remarkable, the TLA200 grade insulation and underfloor heating system, along with the Roadstone Self Compacting Concrete, were completed in just one week! Not only did we see significant cost savings, but the support from the technical team was outstanding. Plus, the zero waste and no need for a site compound made everything even easier. I can’t recommend TLA enough for any residential development project!”
Jeremy Ennis Property Developer
Cost effective
Reduced wastage
Quick drying times
Minimal lead time
Faster installation
*Compared to traditional methods
Technical Characteristics
Cement Dosage (kg/m3)
Density after 28 days (kg/m3)
Thermal Conductivity (W/mK)
Compressive Strength (kPa)
Flexural Strength (N/mm2)
Permeability to Water Vapour (μ)
Shrinkage (NBN) (mm/m)
Fire Reactivity Class
A2 Fire Rated Insulation Solution energystore TLA® combines eps beads coated in an innovative additive with cement and water to create a pourable insulation. This unique poured insulation offers a non-combustible alternative for use in floor and roof construction as a high strength void former or insulation.
No on-site TLA storage or waste.
<0.5% drying shrinkage.
No gaps or breaks in insulation layer that may cause performance issues.
High strength poured insulation
Suitable for flat and sloping roofs
Suitable to apply underfloor heating systems (UFH) directly on top
Suitable for ground bearing and suspended floors
Faster installation compared to traditional methods
T&C’s: