No on-site storage or waste
only EPS bead insulation with Robust Details for masonry construction satisfying Part E
Granularity to BS EN 933-1
Density to BS EN 16809-2 & BS EN 1602
Thermal conductivity to BS EN ISO 10456 & BS EN 12667
Water absorption to BS EN 1609
Reaction to fire classification to BS EN 13501-1
Typical Applications
Masonry Cavity Wall
Timberframe New Build
Party Wall
Internal Wall Insulation
21 - 23 Shore Road
Holywood County Down
BT18 9HX
T 0800 086 6687
info@energystoreltd.com energystoreltd.com
The energystore superbead®system is an injected expanded polystyrene (EPS) bead bonded with an adhesive.
Points for Consideration
EPS is not classified as an ODS – Ozone Depleting Substance. In addition, ozone depleting substances such as CFC’s, HFC’s and HCFC’s are not used in its manufacture.
The blowing agent used in the expansion process is Pentane which has zero Ozone Depleting Potential (ODP).
The EU Risk Assessment on pentane (2003) concluded that additional monitoring of ambient air by Member States is required, prior to reaching any conclusions on the potential for pentane – in common with a host of other non methane hydrocarbons to act as an ozone precursor. As such, there is currently no pan European legislation restricting the use of pentane.
T&C’s: We take every step to make sure that the information in this document is correct and accurate at the point of publication. To ensure you are viewing the most recent and accurate information please visit www.energystoreltd.com. For historical versions of this document please contact info@energystoreltd.com