How Automobile Garages Can Benefit From Investing In a Lift

Lifts are essential equipment for service bays.

As investing in such a bay is extremely crucial for such businesses. Therefore, it is extremely critical for the businesses to make efforts to discover the different types of the lifts, and select the right lift for their businesses.

In this article, we will make a comparison between in-ground and over-ground lifts to make you understand what you should know regarding the lifts.

In Ground Lifts

Generally, in ground lifts are the perfect options for large automobile repair shops.

As you can figure out from the name, these lifts are installed under the ground and can be hidden under the ground.

Therefore, the shop looks clean and tidy when it is not in service. Usually, the installation of an in-ground lift consumes more time. Again, there are three main variety of in-ground lifts:

Single Post

There are three features of these lifts.

One, they are simple to operate. Two, the lifts are safe to operate. Three, they are environmentally friendly.

The underlying advantage of these lifts is that they can handle most vehicle models. Moreover, these lifts are ideal for front-end and suspension work.

These variants are normally found in large professional garages. And most of such lifts have the capacity of more than 8000 pounds.

Side-by-Side Twin Lifts

These variants are safe and popular. Side-by-Side lifts allow the lifting of heavier loads and even distribution along rear and front columns.

Heavy Duty Fore and Aft Lifts

These lift variants are economical and durable. Also, Heavy Duty Fore and Aft Lifts are reliable to operate.

The specific advantage of these lifts is that they can lift vehicles of any size and weight. Such lifts are found in large automotive repair shops. And, the lifts can carry weight in excess of 8,000 pounds.

Above the Ground Lifts

As the name suggests these lifts are installed above the ground and thus are visible. Moreover, these lifts allow quick installation.

In this category, there are two variants– 2-post and 4-post.

2-Post Lifts

These are common variants of the lift. And, you are likely to see 2-post lifts in almost every automotive repair shop.

Automotive shops usually choose 2-post lifts due to the cost effectiveness. And, the lifts are symmetrical, asymmetrical, or very symmetrical.

The structure is decided by post and lift arm characteristics. For example, in a symmetrical 2post, lift columns face each other, and each arm carries 50% of the lift load.

The difference in arms in asymmetrical lift lies in the length. Very Symmetrical lifts bear the characteristics of symmetrical and asymmetrical lifts. So, these lifts can raise light cars, trucks, vans, and utility vehicles in a single bay.

However, 2-post lifts have relatively light load capacity, compared to 4-post variants. So, they car ideal for smaller vehicles.

2-post lifts are also frame-engaging. And, that means, the lift uses four arms to lift vehicles at undercarriage lift points. The usage of four lift arms can accommodate a wide range of lift points.

Also, 2-post lifts require less space. Therefore, the lifts find ample uses in garages, small shops, or repair bays with many lifts in a single location.

4-Post Lifts

These lifts find uses in two primary purposes: to lift heavy vehicles or place one vehicle above another.

4-post lifts have more lifting capacity than 2-post variants. Given their lifting capacities, 4post lifts can lift vehicles up to 40,000 lbs.

The popularity of 4-post lifts also arises from the fact that they do not necessitates any permanent anchorage to the floor.

Also, these lifts are durable and mobile. If you want to anchor the lift, you can fix the lift to the ground.

Conclusion

It is a good practice to invest in such a lift by automobile repair shops. The investment will ease the operations of the garages to improve the experience of their customers. As such, the lifts will be instrumental in raising the profitability of the garages.