How to replace the ink absorber on a canon printer

How to Replace the Ink Absorber on a Canon Printer

Canon printer has a superb feature of high quality ink absorbent pad that soaks up the extra ink from the print cartridges and keep the cartridge free of dried ink. Several alternative printer manufacturers include pad like these on their inkjet printer for best results, but fail to compete with the quality of Canon printer models. Even the Canon printer helpline number remains active on all working days to assist users looking for safe steps to troubleshoot cartridge issues.

However Canon’s pad contains a distinctive quality that the printer actively monitors the waste ink absorbent pads and can show error messages once the pads are filled with ink. It's important to replace the ink absorbent on a Canon printer. We've provided you few steps to accomplish this task and you'll be able issues that hamper the printing tasks.

Before aiming to follow these steps you may need to remember few things like Disposable gloves, Napkin or towel and Replacement ink absorbent pad that are required to accomplish the ink cartridge task.

Step1 and Step2 Open the printer even as after you installed the new ink cartridges. Let the cartridges cradle move to the middle of the unit. After this disconnect the printer to place the cartridges in its position.

Now, place the waste ink absorbent in its black rubber frame.

They get on the correct aspect of your printer situated within the space wherever the ink cartridges stay once the printers keep in standby mode. If you feel that you are not following the steps correctly then contact the Canon printer helpline Australia, if you an Australian user.

Step3 and Step4 Next, use a paper napkin to absorb the surplus ink which will be in pads by pressing it down into the highest of the frame

Pull the rubber frames from the printer, wear gloves and take away the ink absorbent pad or pad from the rubber frame

Step5 and Step6 Insert the new ink absorbent pad into the rubber frame and place the rubber in its original position and so shut the printer.

thenceforth, you've got to carry down the ability button and so plug the printer. Keep holding the ability button till the printer can begin and reset itself and are available on-line.

Step7

At the last step, press and unleash the ok button once more. It ought to blink for 2 to 3 seconds, and so keep it pressed. This indicates that the printer has been reset and ready to print once more without errors.

If any issues so just call Canon Printer Support Number Australia +61-283206022 Original Source: http://www.sooperarticles.com/technology-articles /support-services-articles/how-replace-ink-absorb er-canon-printer-1541229.html