List of reference

Harvard University, 2007. A Summary of Error Propagation. Available at: http://ipl.physics.harvard.edu/wpuploads/2013/03/PS3_Error_Propagation_sp13.pdf A Francois et al, 2019. Building thermal bridge heat losses quantification by infrared thermography. Steady-state evaluation and uncertainty calculation. Andrew Stone et al., 2014. Key factors determining the energy rating of existing English houses. 2 5. Arash, R., 2020. In-Situ Determination of Buildings’ Thermo-Physical Characteristics, s.l.: s.n. ASTM C1130-17, 2017. ASTM C1130-17. Australian Urethane & Styrene, n.d. Expanded Polystyrene. Available at: https://www.thermalps.com.au/imagesDB/wysiwyg/TDS_Expanded_Polystyrene.pdf B. e. a., 2014. Inferring the thermal resistance and effective thermal mass of a wall using frequent temperature and heat flux measurements]. 8. Czajkowski, Ł., Olek, W., Weres, J. & Guzenda , R., 2016. Thermal properties of woodbased panels: specific heat determination. Danielski, I. & Fröling, M., 2015. Diagnosis of Buildings’ Thermal Performance - A Quantitative Method Using Thermography Under Non-steady State Heat Flow. 12. Desogus, G., Mura, S. & Ricciu, R., 2010. Comparing different approaches to in situ measurement of building components. Engineering ToolBox, 2003. Specific Heat of common Substances. Available at: https://www.engineeringtoolbox.com/specific-heat-capacity-d_391.html European Commission , 2020. European Commission. Available at: https://ec.europa.eu/info/energy-climate-change-environment_en Fokaides, P. A. & Kalogirou, S. A., 2011. Application of infrared thermography for the determination of the overall heat. Fokaides, P. A. & Kalogirou, S. A., 2011. Application of infrared thermography for the determination of the overall heat. Gaspar, K., Casals, M. & Gangolells, M., 2016. A comparison of standardized calculation methods for in situmeasurements of fac ̧ ades U-value. Gori, V., Biddulph, P., Elwell, C. A. & Marincioni, V., 2016. Inferring the thermal resistance and effective thermal mass distribution of a wall from in situ measurements to characterise heat transfer at both the interior and exterior surfaces. Green teg, 2018. Instruction Manual for gSKIN® Heat Flux Sensors. Available at: https://greenteg.com/template/userfiles/files/gSKIN_Heat%20Flux%20Sensors%20R %26D_Instructions_v3.pdf Huskseflux, 2018. USER MANUAL FHF02SC.

59

Available at: https://www.hukseflux.com/uploads/productdocuments/FHF02SC_manual_v1803.pdf ISO 6946, 2017. ISO 6946. Available at: https://www.iso.org/standard/65708.html ISO 7345, 2018. https://www.iso.org/standard/65000.html. [联机]. ISO 8990, 1994. ISO 8990:1994 ISO 9869, 2014. ISO 9869. Jean, A., Craig, A., Miranville, F. & Medina, M., 2014. Experimental Method Calibration (MECr): A new relative method for heat flux sensor calibration. 7 12. Johra, H., 2019. Description of the Guarded Hot Plate Method for Thermal Conductivity Measurement with the EP500 Li et al, 2014. Solid-wall U-values: heat flux measurements. 16 10. Material Properties, 2021. Polystyrene – Density – Strength – Melting Point –Thermal Conductivity. Available at: https://material-properties.org/polystyrene-density-strength-meltingpoint-thermal-conductivity/ Mergim Gaši, B. M. S. G., 2019. Comparison of Infrared Thermography and Heat Flux Method for Dynamic Thermal Transmittance Determination Rasooli, A. & Itard, . L. C. M., 2016. Introduction to an In-situ Method for Rapid Measurement of the Walls’ Thermal Resistance in Existing Buildings, s.l.: s.n. T. e. a., 2004. NIST MEASUREMENT SERVICES:Heat-Flux Sensor Calibration, s.l.: s.n. TRADA, 2014. Panel Guide. Available at: https://wpif.org.uk/uploads/PanelGuide/PanelGuide_2014_Annex2B.pdf University of Iowa, 2017. Imaging the Universe. Available at: http://astro.physics.uiowa.edu/ITU/courses/general-astronomy/erroranalysis/formulae-for-statistics-and.html

60