Architecture Portfolio - Elli Tsirintoulaki

Elli Tsirintoulaki

Architecture Portfolio

Professional Projects 1. Upper Camp Street, Manchester 2. Leicester Road, Manchester 3. Justin Close, Manchester 4. Rhos on Sea, Wales 5. Mendora Road, Fulham, London 6. Sydenham Road, Lewisham, London 7. Tamworth Road, Croydon, London 8. Myrtia Beach House, Tersanas, Crete 9. Tong Farm, Chislehurst, London

1. Upper Camp Street, Manchester Project: New build warehouse of 3 units Task: Project management, Production of Construction and Tender package

North-East View Alumasc Skyline pre-coloured aluminium coping or similar in dark grey. Colour to be confirmed by the client.

Metsec cladding rail 202.c.14 fixed to column stud with proprietary cleat fixing.

PIR board insulation.

500mm long UB 152x69x16 parapet post welded to cap plate with 6mm fillet weld full profile.

138mm Kingspan QuadCore Topek Roof panel to achieve a minimun u-value of 0.18W/m²K, according to Building Regulations Approved Document 2010 Part L2A.

80mm Kingspan QuadCore Karrier to achieve a minimum u-value of 0.26 W/m²K, according to Building Regulations Approved Document 2010 Part L2A. Fire classification B-s1,d0.

Kingspan Topdek Insulated Membrane Roof Panel. Thickness to meet u-value.

Metallic Hook-on Cassette Facade System in portrait orientation. Kingspan HKDesign aluminium cassettes in Kingspan Gold and Kinspan Grey or similar approved by the client.

Roof Outlet with Dome Grate 82mm⌀ Pipe Connection.

Metsec 100m20 SFS @ 600c/s (max) fixed to beam with cleat angle slot at SFS fixing position, according to SE Design.

Locating clip, ref: KSHOLC, with EPDM isolator, ref: KSHOIC62, according to manufacturer's details.

Structural steel portal frame according to SE Design.

Vertical mullion, ref: KSHOM/P, according to manufacturer's details.

Steel beam according to SE Design.

Floor Finish (varies by location). Please refer to finishes drawings.

18mm structural ply to be nailed to joist @ 250 c/s.

Timber joist according to SE Design.

Proposed First Floor

1 layer of 12.5mm plasterboard. Painted skim lining. Please refer to Finishes drawings.

Benchmark Metallic Hook-on Cassette.

Benchmark Vertical Mullion.

80mm Benchmark Quadcore Karrier.

To achieve minimum U-Value of 0.26w/m²K. According to Building Regulations Approved Document 2010 Part L2A. Fire classification B-s1,d0.

Structural steel support framework . Type and sizes to SE Design.

200mm thick in-situ concrete slab with floated finish, according to SE Design.

Powder coated aluminium cladding in long lengths to form plinth be fixed to face of rigid insulation. Colour - Dark Grey to match the facade.

50mm Kingspan GreenGuard GG300 Insulation Board, to achieve minimum UValue of 0.22 W/m²K in accordance with Building Regulations Approved Document 2010 Part L2A.

50mm Rigid insulation to extend to base of foundations

DPM. 150mm Well compacted hardcore.

Ground beam according to SE Design.

Piling, according to manufacturer's design.

RWP according to SE design.

Façade Detail

Proposed Ground Floor

Company: Debtal Architecture Ltd Drawings produced with Revit

South-East View

Steel Structure 3D View

Roof View

Steel Structure 3D View

Internal View

2. Leicester Road, Manchester Project: Rear extension and loft conversion to a retail property Task: Project management, Production of Construction package and Valuation Documents Guttering to match existing to be fitted to 25 X 200mm fascia board. Gutter profile shown indicative only. New fascia boards to be treated and painted. Colour to match existing High performance single ply roofing membrane or equal approved. To have staggered laps of a minimum of 50mm 150mm Kingspan Kooltherm K107 rigid insulation. Roof construction to achieve minimum U-Value of 0.18 W/m²K (Actual 0.18) in accordance with Building Regulations Approved Document 2010 Part L1B

Vapour control layer. Min 1000 gauge (250 micron) polythene sheet. All joints lapped and then sealed with double sided self-adhesive tape.

18mm WBP grade plywood on timber fillet to achieve min fall of 1/80.

150mm Roof Joist to SE Design.

Min. 9mm Soffit board fixed to 32mm batten framework.

Hanging tiles on treated tiling battens and vertical battens. Tiles to match existing roof tiles.

Breathable Membrane fixed according to manufacturer's specification.

9mm OSB. Nailed to stud frame.

50mm Kingspan Kooltherm K112 insulation fixed between timber studs. To achieve minimum U-Value of 0.28w/m²K. According to Building Regulations Approved Document 2010 Part L2B.

150mm Flat roof joist, according to SE design.

100mm x 75mm treated Softwood wall plate on top of proposed dormer walls.

To be fixed using 30 x 5mm galvanized steel straps.

25mm Kingspan Kooltherm K112 insulation and 3mm Skim Coated 12.5mm plasterboard (37.5mm Insulated plasterboard). Painted. Colour TBC by client.

100 x 50mm SC3 stud frame @ max 400mm centres. Noggins @ max 600mm centres. Sizes to be confirmed by the SE.

New uPVC double glazed window. Colour to match existing. Location and type shown indicative only.

100 mm Concrete blockwork.

Roof ventilator.

18mm WBP grade plywood. on timber firring to achieve min fall of 1/80.

75x175mm C16 timber joists @ 400 c/s, according to SE design.

125mm Kooltherm K107 Kingspan insulation between the rafters and 25mm Kooltherm K107 Kingspan insulation under the rafters.

Roof construction to achieve minimum UValue of 0.18w/m²K in accordance with Building Regulations Approved Document 2010 Part L2B. Roof to achieve AA fire rating.

Vapour control layer.

Gypframe MF8 Strap Hanger or equal, fixed distances specified by the manufacturer.

Gypframe MF5 Ceiling Section at max 450mm, according to manufacturer specifications.

Gypframe MF7 Primary Support Channel.

3mm Skim on 12.5mm Gypsum Soundblock Plasterboard (nominal mass per unit area 12.5kg/m2) mounted on dabs. Finish colour TBA with client.

Skirting. Painted Timber. Paint colour and finish TBA with Client Floor Finish (varies by location). Please refer to the interior designer's drawings.

18mm OSB Deck.

50x150mm C24 timber joists @ 400 c/s, according to Structural Engineering design.

75mm Isover acoustic slab insulation or equal.

2 layers of 12.5mm Gyproc plasterboard or similar fire rated plasterboard to achieve 60min fire protection.

Setting Out Section

Beam to Structural Engineering design.

Minimum clear ceiling void 250mm.

Varies depending on location. Please refer to the sections and M&E plans.

1 layer of 12.5mm plasterboard.

Pre Construction

During Construction

Post Construction

Company: Debtal Architecture Ltd Drawings produced with Revit

Setting Out Ground Floor

Pre Construction

During Construction

Post Construction

3. Justin Close, Manchester Project: Flats conversion Task: Flats proposal

Proposed Second Floor

Proposed First Floor

Proposed Ground Floor

Company: Debtal Architecture Ltd Drawings produced with Revit

Proposed Front Elevation

Proposed Rear Elevation

4. Rhos on Sea, Wales Project: New build flats proposal Task: Feasibility Study

Proposed Front Elevation

West View

Proposed site layout

Proposed First &

Second Floor

Company: Debtal Architecture Ltd Drawings produced with Revit

Proposed Side Elevation

South View

Proposed Third Floor

5. Mendora Road, Fulham, London Project: Rear extension and loft conversion

Proposed Ground Floor

Propose

Company: Kappa Planning Ltd Renders produced with Revit

d First Floor

Proposed Loft

6. Sydenham Road, Lewisham, London Project: Proposed roof extension, loft conversion and change of use to a Large HMO in a conservation Task: Existing and proposed drawings

Existing First Floor

Proposed First Floor

Existing Second Floor

Proposed Second Floor

Existing Roof

Proposed Loft

Prop

area

Company: Kappa Planning Ltd Drawings produced with AutoCAD

Existing Front Elevation

osed Roof

Proposed Front Elevation

7. Tamworth Road, Croydon, London Project: New build dwellinghouse Task: New build proposal

Company: Kappa Planning Ltd Renders produced with Revit and Photoshop

Proposed Loft

Proposed First Floor

Proposed Ground Floor

8. Myrtia Beach House, Tersanas, Crete Project: House renovation Task: Building Renovation Modelling in Revit

Company: Y Kalligeris & Associate Architects

9. Tong Farm, Chislehurst, London Project: Farm redevelopment masterplan Task: Master planning and further details Shops and Bistro Offices (1st Floor)

Kitchen

Butchery Toilets

Bistro

Proposed Ground Floor

Courtyard Shops

Proposed Front Elevation Proposed First Floor

Proposed Side Elevation

Cabin Type 1

Toilets (1st Floor)

Company: Kappa Planning Ltd Drawings produced with AutoCAD and SketchUp

Proposed Site

Cabin Type 2

Proposed Ground Floor

Cabin Type 3

Cabin Type 4

Proposed Ground Floor

Proposed Ground Floor

Proposed First Floor