Issuu on Google+


Beachside Lighting was established in 1994 to fill a need for corrosion-resistant exterior lighting fixtures in Hawaii’s moist, salt air environment. While our focus on durability has given specifiers the best choice for near-ocean applications, our fixtures can be used anywhere quality is a concern.

Pathlights / Bollards / Docklights..............................................................................3 - 11 Drive Over / Marker Fixtures..............................................................................................12 Directionals.......................................................................................................................1 3 - 1 7 In-grade..............................................................................................................................18-20 Steplights...........................................................................................................................21-22 Specialty / Projection....................................................................................................23-25 Architectural.....................................................................................................................26-30 Finishes....................................................................................................................................31 Accessories / Transformers........................................................................................32-33 Torches...............................................................................................................................34-35 *Cover photo: East O’ahu Residence, Courtesy of George Smith Photography

Beachside Lighting (800) 405-6732 (808) 263-5717 BeachsideLighting.com 905 Kalanianaole Hwy. #29A, Kailua, Hawaii 96734 USA

2


R-Series Pathlights

Beachside’s R-Series Pathlights have set the standard for durability in low-voltage walkway / area lighting. Featuring an 18 gauge copper shade, 5mm thick frosted glass, and a riser made from schedule 40 brass pipe, the completely sealed fixture allows easy access to the brass lamp compartment without any tools. Lamp sources include LED, halogen, and xenon. CSA Listed. IP Rating: 66.C

Stem Heights / Accessories

LED Lamping 12 Volt (9 – 15V AC); Integral Driver 2W-A 4W-A

2 watt amber 4 watt amber

(1350K) (1350K)

3W 4W 12W

3 watt warm white (3000K) 4 watt warm white (3000K) 12 watt warm white (3000K)

Halogen / Xenon Lamping 12 Volt G4 & GY6.35 halogen (2900K) G4 xenon (2600K) 10H 20H 35H 10X 15X 20X

10 watt halogen 20 watt halogen 35 watt halogen 10 watt xe n o n 15 wat t xenon 20 watt xenon

Available Stem Heights: 2” 8” 12” 16” 20” __”

(5cm) (20cm) (30cm) (40cm) (51 cm) Custom (in inches)

GS2 GS2BC GS3R GS4 JB

Heavy Duty Ground Spike GS2 w/Brass Cap GS2BC For Telescoping Stem Medium Duty Ground Spike Cast Brass Junction Box

HSR

Half Shield (180° illumination)

TRH-120V Transformer at Base, 120V TRH-230V Transformer at Base, 230V

Finishes Available Finishes: FIN-AB FIN-BK FIN-BS FIN-DB FIN-NK FIN-RB FIN-V FIN-WH

Antique Brass Acid Finish Black Acid Finish Blue Steel Acid Finish Dark Bronze Acid Finish Satin / Brushed Nickel Plating Red Bronze Acid Finish Green / Verde Acid Finish White Powder Coating

• Unfinished Brass/Copper is Standard. No Specification is Required. Fixture Will Weather to a Natural Living Patina. See Page 31 of Catalog.

Specification Example: Fixture—Stem Height—Lamp—Accessory—Finish R3—12—3W—GS2—HSR—FIN-DB

3


R-Series Pathlights

R3 (LED)

9” (23cm) x 19.2” (49cm) on Standard 12” (30cm) Riser

R3A (LED)

8.8” (22.8cm) x 19.8” (50cm) on Standard 12” (30cm) Riser

R-003A (Halogen / Xenon) 4

8.8” (22.8cm) x 16” (41cm) on 12” (30cm) Riser

R5 (LED)

R-003

7.5” (19cm). x 18.7” (47.5cm) on Standard 12”(30cm) Riser

(Halogen / Xenon) 9” (23cm) x 16” (41cm) on 12” (30cm) Riser

R-005 (Halogen / Xenon)

7.5” (19cm) x 15.5” (39.4cm) on 12” (30cm) Riser


R-Series Pathlights

R5A (LED) 4.8” (12cm) x 14.7” (37cm) on Standard 8” (20cm) Riser

R-005A (Halogen / Xenon) 4.8” (12cm) x 11.3” (28.7cm) on 8” (20cm) Riser

R7 (LED)

R-007 (Halogen / Xenon)

7.3” (18.5cm) x 20.3” (52cm) on Standard 12” (30cm) Riser

R-008 (Halogen / Xenon) 6” (15.2cm) x 11.5” (29cm) on 8” (20cm) Riser [shown on 16” Riser]

R8 (LED)

7.3” (18.5cm) x 16.3” (41cm) on 12” (30cm) Riser

6” (15.2cm) x 15.3” (39cm) on Standard 8” (20cm) Riser

5


R-Series, Z1 & L-004 Pathlights

R19 (LED)

7” (17.8cm) x 8.2” (21cm) on Standard 2” (5cm) Riser

Z1 (LED)

5” (12.6cm) Diam. x 17.1” (43cm) High on Standard 12” (30cm) Riser [2, 3, 4 watt Only]

6

R-019 (Halogen / Xenon)

7” (17.8cm) x 5.0” (12.7cm) on 2” (5cm) Riser [shown on 16” Riser]

L-004 (Incandescent Bayonet Base) 3.5” (8.9cm) Shade Diam. x 23” (58cm) High

[13, 18, 26 watt]


12 Volt Bollards Halogen Lamping L-021 L-021-GS L-022

Small Bollard for Concrete Installation Ground Spike / Junction Box Installation Bollard for Concrete Installation

12 Volt (9 – 15V AC), Integral Driver. Remote Transformer Required. ESX 20 watt FMT 35 watt EXT 50 watt

LED Lamping L21 L21-GS L22

Small Bollard for Concrete Installation Ground Spike / Junction Box Installation Bollard for Concrete Installation

12 Volt (9 – 15V AC), Integral Driver. Remote Transformer Required. 2W-A 2 watt amber 4W-A 4 watt amber 3W 3 watt warm white 4W 4 watt warm white 12W 12 watt warm white

L-021 / L21

2.4” (6cm) x 4.2” (10.7cm) Base Diam. x 7.8” (19.8cm)

(1350K) (1350K) (3000K) (3000K) (3000K)

Accesories: GS2* Heavy Duty Ground Spike GS2BC* GS2 w/Brass Cap HS1 Half Shield (180° illumination) GS4* Medium Duty Ground Spike JB * Cast Brass Junction Box * for Finishes: FIN-AB FIN-BK FIN-BS FIN-DB FIN-NK FIN-RB FIN-V FIN-WH

L-021-GS / L21-GS Only

Antique Brass Acid Finish Black Acid Finish Blue Steel Acid Finish Dark Bronze Acid Finish Satin / Brushed Nickel Plating Red Bronze Acid Finish Green / Verde Acid Finish White Powder Coating

L-021-GS

2.4” (6cm) x 6.8” (17.3cm)

• Uninished Brass/Copper is Standard. No Specification is Required. Fixture Will Weather to a Natural . Living Patina. See Page 31 of Catalog. Specification Example: Fixture—Lamp—Accessory(ies)—Finish L22—4W—HS1—FIN-DB

L-022 / L22

2.4” (6cm) and 4.0” (10cm) Base Diam. x 27.2” (69cm)

7


M-Series Pathlights The M-Series pathlights are the ultimate in heavy-duty landscape lighting. Made of cast brass, these fixtures are larger in scale than other Beachside pathlights. Louvers angled at 45° to eliminate glare. The lamp is protected by a threaded glass lens. Risers are made of schedule 40 brass pipe. Lamp sources include self-ballasted CFL, halogen-xenon, and metal halide. An LED version with single louver design is also available. CSA Listed. IP 66.

CFL Lamping

Stem Heights / Accessories

120 Volt / 230Volt; E26 / E27 Base Self-Ballasted CFL w/ MOL 150mm or Less

Available Stem Heights:

27CFL

16” (40cm) 20” (51 cm) Custom (in inches)

27 watt CFL 2700K (120V Only)

Halogen / Xenon Lamping 12 Volt G4 & GY6.35 halogen G4 xenon 35H 20X

(2900K) (2600K)

35 watt halogen 20 watt xenon

Metal Halide Lamping

120 Volt / 230Volt; E26 / E27 Base ED17 (3000K); Remote Ballast Required 50MH 70MH 100MH

50 watt metal halide 70 watt metal halide 100 watt metal halide

GS2BC JB HSM RB-50MH-120 RB-70MH-120 RB-100MH-120 RB-50MH-230 RB-70MH-230 RB-100MH-230 TRH TRH-230

GS2 w/Brass Cap Cast Brass Junction Box Half Shield (180° illumination) Remote 50w MH Ballast Remote 70w MH Ballast Remote 100w MH Ballast Remote 50w MH Ballast Remote 70w MH Ballast Remote 100w MH Ballast Transformer Fixture Base, 120V Transformer Fixture Base, 230V

Finishes Available Finishes: FIN-AB FIN-BK FIN-BS FIN-DB FIN-NK FIN-RB FIN-V FIN-WH

Antique Brass Acid Finish Black Acid Finish Blue Steel Acid Finish Dark Bronze Acid Finish Satin / Brushed Nickel Plating Red Bronze Acid Finish Green / Verde Acid Finish White Powder Coating

• Uninished Brass/Copper is Standard. No Specification is Required. Fixture Will Weather to a Natural . Living Patina. See Page 31 of Catalog. Specification Example: Fixture—Stem Height—Lamp—Accessory—Finish M3—20—50MH—GS2BC—RB50MH-230—FIN-BK

M-SERIES (LED) The LED version of the M-Series features a reflector within the shade and a single louver. The specification includes “LED” after the model number. The same accessories and finishes are available. 12 Volt (9 – 15V AC); Integral Driver 2W-A 4W-A 3W 4W 12W

2 watt amber 4 watt amber 3 watt warm white 4 watt warm white 12 watt warm white

(1350K) (1350K) (3000K) (3000K) (3000K)

Transformer at Fixture Base, 120V TRH TRH-230 Transformer at Fixture Base, 230V Specification Example: Fixture—Stem Height—Lamp—Accessory(ies)—Finish M3—LED—20—12W—GS2BC—HSM—FIN-DB

M3 8

10.6” (27cm) Diam. x 29.6” (75cm) High on Standard 20” (51cm) Riser [120V - 230V CFL, Metal Halide, 12V Halogen / Xenon, LED]


M-Series Pathlights

M5

11” (28cm) Diam. x 28.6” (72.6cm) High on Standard 20” (51cm) Riser [120V - 230V CFL, Metal Halide, 12V Halogen / Xenon, LED]

M7

M6 5.5” (14cm) Diam. x 28.9” (73.4cm) High on Standard 20” (51cm) Riser [120V - 230V CFL, Metal Halide, 12V Halogen / Xenon, LED]

M8 8” (20.3cm) Diam. x 30” (76.2cm) High on Standard 20” (51cm) Riser [120V - 230V CFL, Metal Halide, 12V Haloge/ Xenon, LED]

12.0” (30.5cm) Diam. x 30.2” (76.7cm) High on Standard 20” (51cm) Riser [120V - 230V CFL, Metal Halide, 12V Halogen / Xenon, LED]

9


MB-Series Bollards & Docklights Beachside’s MB-Series bollards set the standard for durable, corrosion resistant walkway lighting. These cast brass fixtures have louvers angled at 45° to eliminate glare. The lamp is protected by a threaded glass lens. An internal brass collar with stainless steel mounting hardware helps ensure stability. Lamp sources include self-ballasted CFL, halogen-xenon, and metal halide. An LED version with single-louver design is also available. CSA Listed. IP 66.

LED Lamping [Single Louver Design]

CFL Lamping 120 Volt / 230Volt; E26 / E27 Base Self-Ballasted CFL w/ MOL 150mm or Less. 27CFL

27 watt CFL 2700K (120V only)

Halogen / Xenon Lamping 12 Volt G4 & GY6.35 halogen G4 xenon 35H 20X

(2900K) (2600K)

35 watt halogen 20 watt xenon

Metal Halide Lamping

12 Volt (9 – 15V AC); Integral Driver. Line Voltage Version Available By Specifying “120V” or “230V” After Fixture Model. 2W-A 4W-A

2 watt amber 4 watt amber

(1350K) (1350K)

3W 4W 12W

3 watt warm white (3000K) 4 watt warm white (3000K) 12 watt warm white (3000K)

Shaft Heights

120 Volt / 230Volt; E26 / E27 Base ED17 (3000K); Remote Ballast Required.

4” (10cm) [Metal Halide not Available] 12” (30cm) 28” (71cm)

50MH 70MH 100MH

Accessory

MB3

10

50 watt metal halide 70 watt metal halide 100 watt metal halide

HSM

Half Shield (180° illumination)

10.6” (27cm) Diam. x 35.4” (90cm) High on 28” (71cm)Shaft [120V - 230V CFL, Metal Halide, 12V Halogen / Xenon, LED]

Finishes Available Finishes: FIN-AB FIN-BK FIN-BS FIN-DB FIN-NK FIN-RB FIN-V FIN-WH

Antique Brass Acid Finish Black Acid Finish Blue Steel Acid Finish Dark Bronze Acid Finish Satin / Brushed Nickel Plating Red Bronze Acid Finish Green / Verde Acid Finish White Powder Coating

• Uninished Brass/Copper is Standard. No Specification is Required. Fixture Will Weather to a Natural . Living Patina. See Page 31 of Catalog. Specification Example: Fixture—Stem Height—Lamp—Accessory—Finish MB8—28—50MH—HSM

MB5 11” (28cm) Diam. x 34.4” (87.4cm) High on Standard 28” (71cm) Shaft [120V - 230V CFL, Metal Halide, 12V Halogen / Xenon, LED]


MB-Series Bollards & Docklights

MB6 5.5” (14cm) Diam. x 34.6” (87.9cm) High on 28” (71cm) Shaft MB7 12.0” (30.5cm) Diam.. x 35.9” (91.2cm) High on 28” (71cm) Shaft [120V - 230V CFL, Metal Halide, 12V Halogen / Xenon, LED] [120V - 230V CFL, Metal Halide, 12V Halogen / Xenon, LED]

Docklights

MB8 8” (20.3cm) Diam. x 35.8” (91cm) High on 28” (71cm) Shaft [120V - 230V CFL, Metal Halide, 12V Halogen / Xenon, LED]

MB6-4 5.5” (14cm) Diam. x 10.6” (27cm) High on 4” (10cm) Shaft [120V - 230V CFL, Metal Halide, 12V Halogen/Xenon, LED] Docklights Have “ –4” Suffix: MB3-4; MB5-4; MB7-4; MB8-4 *Other Shade Styles Available. 11


Drive-Over Marker Fixtures [Halogen, LED, Metal Halide] Beachside offers two size marker fixtures. The E17 offers a compact design, LED and halogen sources, with illumination configurations based on machining. The larger L-017 uses halogen and metal halide sources. This fixture is made of cast brass, with the ability to shield up to all but one of the four open sectors. CSA listed. IP67.

E17 E17-1 E17-2 E17-OP

(Standard 4-Sector Illumination) (Single Sector Illumination) (Dual Adjacent Sector Illumination) (Dual Opposite Sector Illumination)

Lamp: 12V MR16 Halogen IR “spot” Type, 20 Watt Max. See Lamp Manufacturer for ANSI Code for Available IR Lamps. or LED 12 Volt (9 – 15V AC); Integral Driver 2W-A 4W-A 3W 4W 12W

2 watt amber 4 watt amber 3 watt warm white 4 watt warm white 12 watt warm white

(1350K) (1350K) (3000K) (3000K) (3000K)

Finishes: ( See Page 31 ) FIN-AB, FIN-BK, FIN-BS, FIN-DB, FIN-NK, FIN-RB, FIN-V, FIN-WH • Unfinished Brass Requires No Finish Suffix.

E17

3.8” (9.6cm) Diam. x .85” (2.2cm) Height Above Grade x 5.3” (13.5cm) Depth Below Grade

Specification Example: Model—Lamp—Finish E17-2—4W—FIN-BK

L-017 L-017-B L-017-B-230V

(12V) (120V) with Integral Transformer (230V) with Integral Transformer

Lamp: 12V MR16 Halogen IR “spot” Type, 20 watt Max. See Lamp Manufacturer for ANSI Code for Available IR Lamps.

L-017-A L-017-A-230V

(120V) with Integral Ballast

(230V) with Integral Ballast Lamp: Ceramic Metal Halide MR16 Lamp, 35 watt Maximum. 20SP 20 watt Spot 35SP 35 watt Spot Accessories: CR HS17-1 HS17-2 HS17-OP

Brass Concrete Ring for Flush Installation Shield for Single Sector Illumination Shield for Dual Adjacent Sector Illumination Shield for Opposite Sector Illumination

Finishes: ( See Page 31 )

FIN-AB, FIN-BK, FIN-BS, FIN-DB, FIN-NK, FIN-RB, FIN-V • Unfinished Brass Requires No Finish Suffix.

Specification Example: Model—Lamp—Accessories—Finish L-017—A—20SP—CR—HS17-2—FIN-DB

12

L-017

6.5” (16.5cm) Diam. x 1.9” (4.8cm) Height Above Grade x 7.8” (19.8cm) Depth Below Grade [12 volt] or 9.4” (23.9cm) [120V / 230V]


Directionals – E8 Series [LED] The E8 is a low profile accent fixture using only 3 or 4 watts. With 117 and 197 lumens respectively, the fixture’s LED module features field changeable optics (spot, narrow flood, and flood), allowing a range of effects for most general directional illumination. The E8 can be ground or tree mounted, and is available on a single or dual head riser. Standard 12V AC input, or with integral transformer at its base for 120V or 230V applications. CSA listed. IP67.

E8

1.6” (4cm) Diam. x 4.2” (10.8cm) Length from Pivot Point

E8

Shown with BGS8 and TDM1

Cree XP-G LED: 3 or 4 watt warm white (3000K) 3W-SP 3 watt 10° 3W-NFL 3 watt 30° 3W-FL 3 watt 50° 4W-SP 4 watt 10° 4W-NFL 4 watt 30° 4W-FL 4 watt 50° Stem Height (E8-S and E8-S2 Only): 8” (20cm), 12” (30cm), 16” (40cm), 20” (51cm), or Custom Height (in inches) Mounting Accessories: GS4 Standard Ground Spike with Brass Cap GS2 Heavy Duty Ground Spike GS2BC Heavy Duty Ground Spike with Brass Cap GS3R Brass Spike Allowing Telescoping Riser (E8-S / E8-S2) JB Cast Brass Junction Box SA Sure Aim Locking Rotation Accessory Tree Mounts: ( See Page 32 ) TDM1, TDM2, TDM2-SS, TDM3, TDM4, TMJB, TMJBX

E8-S

Optical Accessories: BGS8 Brass Glare Shield, 45° BGS8F Brass Glare Shield, Full Cutoff HL8 Honeycomb Louver, 1/8” (3mm) Thick FR8 Frosted Lens RT8 Rectilinear Spread Lens TRH TRH-230

Transformer at Fixture Base, 120 Volts Transformer at Fixture Base, 230 Volts

Finishes: ( See Page 31 ) FIN-AB, FIN-BK, FIN-BS, FIN-DB, FIN-NK, FIN-RB, FIN-V • Unfinished Brass Requires No Finish Suffix Specification Example: Model—Stem Height (if any)—Lamp—Accessories—Finish E8-S—12—4W-NFL—HL1—BGS8—GS2—FIN-DB

E8-S2 13


Directionals – E16 Series [LED] The E16 is a high power, 12 watt accent fixture delivering up to just under 600 lumens. The cylindrical LED module uses the fixture itself to dissipate the heat, allowing a small 2.4” (6cm) footprint. The E16 has field changeable optics (spot, narrow flood, and flood), can be ground or tree mounted, and is available on a single or dual head riser. Standard 12V AC input, or with integral transformer at its base for 120V or 230V applications. CSA listed. IP67.

E16

2.4” (6.1cm) Diam. x 4.7” (12cm) Length from Pivot Point

E16

Shown with BGS and GS4

Cree XP-G LED: 12 watt warm white (3000K) 12W-SP 12W-NFL 12W-FL

12 watt 12 watt 12 watt

10° 30° 60°

Stem Height (E16-S and E16-S2 Only): 8” (20cm), 12” (30cm), 16” (40cm), 20” (51cm), or Custom Height (in inches). Mounting Accessories: GS4 Standard Ground Spike with Brass Cap GS2 Heavy Duty Ground Spike GS2BC Heavy Duty Ground Spike with Brass Cap GS3R Brass Spike Allowing Telescoping Riser (E16-S / E16-S2) JB Cast Brass Junction Box SA Sure Aim Locking Rotation Accessory Tree Mounts: ( See Page 32 ) TDM1, TDM2, TDM2-SS, TDM3, TDM4, TMJB, TMJBX

E16-S

Optical Accessories: BGS Brass Glare Shield, 45° BGSF Brass Glare Shield, Full Cutoff FR Frosted Lens HL1 Honeycomb Louver, 1/8” (3mm) Thick HL2 Honeycomb Louver, 1/4” (6mm) Thick RT Rectilinear Spread Lens TRH TRH-230

Transformer at Fixture Base, 120 Volts Transformer at Fixture Base, 230 Volts

Finishes: ( See Page 31 ) FIN-AB, FIN-BK, FIN-BS, FIN-DB, FIN-NK, FIN-RB, FIN-V • Unfinished Brass Requires No Finish Suffix Specification Example: Model—Stem Height (if any)—Lamp—Accessories—Finish E16-S—20—12W-NFL—HL1—BGS—GS2BC—FIN-DB

14

E16-S2


Directionals – L-011 Series [Halogen] The L-011 is a Beachside standard, using up to a 50 watt maximum MR-16 halogen lamp. It is also available on a single or dual head riser. Standard 12V AC input, or with integral transformer at its base for 120V or 230V applications. CSA listed. IP67.

L-011

2.4” (4cm) Diam. x 4.9” (12.4cm) Length from Pivot Point

L-011 Shown on TDM1

12 Volts—Remote Transformer Required. MR16 Halogen IR Type Lamp, 50 watt Maximum. See Lamp Manufacturer for All MR16 IR Type Lamps Available. Stem Height (L-011-S and L-011-S2 Only): 8” (20cm), 12” (30cm), 16” (40cm), 20” (51cm), or Custom Height (in inches) Mounting Accessories: GS4 Standard Ground Spike with Cast Brass Cap GS2 Heavy Duty Ground Spike GS2BC Heavy Duty Ground Spike With Cast Brass Cap JB Cast Brass Junction Box SA Sure Aim Locking Rotation Accessory Tree Mounts: ( See Page 32 ) TDM1, TDM2, TDM2-SS, TDM3, TDM4, TMJB, TMJBX Optical Accessories: BGS Brass Glare Shield, 45° BGSF Brass Glare Shield, Full Cutoff HL1 Honeycomb Louver, 1/8” (3mm) Thick FR Frosted Lens RT Rectilinear Spread Lens TRH TRH-230

L-011-S

Transformer at Fixture Base, 120 Volts Transformer at Fixture Base, 230 Volts

Finishes: ( See Page 31 ) FIN-AB, FIN-BK, FIN-BS, FIN-DB, FIN-NK, FIN-RB, FIN-V • Unfinished Brass Requires No Finish Suffix Specification Example: Model—Stem Height (if any)—Lamp—Accessories—Finish L-011-S—20—FMW—HL1—BGS—GS2BC—FIN-DB

L-011-S2 15


Directionals [Halogen & Metal Halide] Beachside’s M30 and M38 are rugged, heavy duty directionals which use halogen IR and metal halide Par lamps. CSA listed. IP66.

M30

Lamp: 12V MR16 Halogen IR Type, 75 watt Max. See Lamp Manufacturer for Available IR Lamps. or 120V PAR30LN Halogen IR Type, 75 watt Max. See Lamp Manufacturer for Available IR Lamps. or 120V PAR30LN Metal Halide, 70 watt Max—Remote Ballast Required 70MHPAR30LNFL

70 watt Flood

M38

Lamp: 120V PAR38 Halogen IR Type, 150 watt Max. See Lamp Manufacturer for Available IR Lamps. or 120V PAR38 Metal Halide, 150 watt Max—Remote Ballast Required Ground Mounting Accessories: ( See Page 32 ) GS2 Heavy Duty Ground Spike GS2BC Heavy Duty Ground Spike with Cast Brass Cap JB Cast Brass Junction Box Tree Mounts: ( See Page 32 ) TMJB Brass Tree Mount Box with Stainless Steel Strap TMJBX Brass Tree Mount Box with Stainless Steel Screws Metal Halide Ballasts: ( See Page 33 ) RB-(wattage) Direct Burial Composite Remote Ballast Box SB-(wattage) Above Grade Stainless Remote Ballast Box Finishes: ( See Page 31 ) FIN-AB, FIN-BK, FIN-BS, FIN-DB, FIN-NK, FIN-RB, FIN-V • Unfinished Brass Requires No Finish Suffix

M30 Diam. 4.8” (12.2cm) x 9.8” (25cm) Length

Specification Example: Model—Stem Height (if any)—Lamp—Accessories—Finish M30—70MHPAR30SP—GS2BC—RB-70—FIN-DB

M38 Shown on TMJB in Key Largo, Florida

M38 6.5” (16.5cm) Diam. x 10.8” (27.4cm) Length 16


Directionals [Metal Halide] Beachside’s M39 fixture uses a bi-pin metal halide lamp to deliver a large rectangular distribution, ideal for large canopy trees. The reflector and bezel can be rotated 90° to allow either a horizontal or vertical orientation. CSA listed. IP 66. The W16 fixture combines the punch of metal halide with the small footprint of an MR16 lamp. CSA listed. IP 67.

M39

Voltage: Lamp: 20MH 35MH 70MH

120V, 230V, 277V (specify with ballast below) G12 Base Ceramic Metal Halide, 70 watt Max., 3000K 20 watt 35 watt 70 watt

Optical Accessory: BGSM39 Brass Glare Shield (horizontal only)

W16

Voltage: Lamp: 20SP 35FL • Other CMH

120V, 230V, 277V (specify with ballast below) GX10 Base Ceramic Metal Halide MR16, 35 watt Max., 3000K 20 watt Spot 35 watt Flood MR16 Lamps Available. See Specification Sheet.

Optical Accessories—W16 Only: ( See Page 32 ) BGS Brass Glare Shield, 45° BGSF Brass Glare Shield, Full Cutoff HL1 Honeycomb Louver, 1/8” (3mm) Thick FR Frosted Lens RT Rectilinear Spread Lens Ground Mounting Accessories: ( See Page 32 ) GS2 Heavy Duty Ground Spike GS2BC Heavy Duty Ground Spike with Cast Brass Cap JB Cast Brass Junction Box

M39

6.3” (16cm) Diam. x 6.0” (15.2cm); 8.5” (21.6m) with Shield

W16

2.4” (6.1cm) Diam. x 4.9” (12.4cm) Length from Pivot Point

Tree Mounts: ( See Page 32 ) TMJB Brass Tree Mount Box with Stainless Steel Strap TMJBX Brass Tree Mount Box with Stainless Steel Screws Metal Halide Ballasts—Remote Magnetic: (See Page 33 ) Use With Either Ground or Tree Mounting Accessories Above. RB-(wattage)-(voltage) In-Grade Composite Remote Ballast Box SB-(wattage)-(voltage) Above Grade Stainless Remote Ballast Box or Metal Halide Ballasts—At Fixture Electronic*: ( See Page 33 ) DBMH-(wattage)-(voltage) Ground Mounted Spike with Ballast contained and Hidden in Brass Housing TMBB-(wattage)-(voltage) Low Profile Tree Mounted Brass Ballast with Stainless Strap TMBBX-(wattage)-(voltage) Low Profile Tree Mounted Brass Ballast with Stainless Screws *Electronic Ballasts Use Either 20 or 35 watts Only Finishes: ( See Page 31 ) FIN-AB, FIN-BK, FIN-BS, FIN-DB, FIN-NK, FIN-RB, FIN-V, FIN-WH • Unfinished Brass Requires No Finish Suffix Specification Examples: Model—Lamp—Accessories—Ballast—Finish M39-70MH—BGSM39—RB-70-230V—JB—FIN-DB or W16—35FL—BGSF—HL1—TMBB-35-120V—FIN-BK

17


In-Grade Uplights [Halogen, LED] Beachside offers two styles of 12 Volt in-grade uplights with a 4.4” (11.2cm) diameter or less. The E10 can be used with halogen or LED sources, and features 360° rotation, with angling up to 15° (partial cutoff angling up to 30°), all within a 4” (10.1cm) footprint. Flush with grade, it can be used in ground or concrete (drainage needs to be provided). The L-009 (halogen) and L9 (LED) fixtures are rugged, uni-directional fixtures which feature solid brass faceplates. A remote transformer is required. CSA listed. IP67.

E10

Lamp: 12V MR16 Halogen IR Type, 50 watt Max. See Lamp Manufacturer for ANSI Code for Available IR Lamps. or LED 12 Volt (9 – 15V AC); 3000K; Integral Driver 3W-SP 3W-NFL 3W-FL 4W-SP 4W-NFL 4W-FL 12W-SP 12W-NFL 12W-FL

3 watt 3 watt 3 watt 4 watt 4 watt 4 watt 12 watt 12 watt 12 watt

10° 30° 50° 10° 30° 50° 10° 30° 60°

Optical Accessories: HL1 Honeycomb Louver, 1/8” (3mm) Thick FR Frosted Lens RT Rectilinear Spread Lens Finishes: ( See Page 31 ) FIN-AB, FIN-BK, FIN-BS, FIN-DB, FIN-NK, FIN-RB, FIN-V • Unfinished Brass Requires No Finish Suffix Specification Example: Model—Lamp—Finish E10—4W-NFL—FIN-DB

E10

4” (10.1cm) Diam. x 8” (20.3cm) Depth Below Grade

L-009

Lamp: MR16 Halogen IR Type Lamp, 50 watt Maximum. See Lamp Manufacturer for ANSI Codes for IR Type Lamps Available.

L9

LED 12 Volt (9 – 15V AC); 3000K; Integral Driver 3W-SP 3W-NFL 3W-FL 4W-SP 4W-NFL 4W-FL 12W-SP 12W-NFL 12W-FL

3 watt 3 watt 3 watt 4 watt 4 watt 4 watt 12 watt 12 watt 12 watt

10° 30° 50° 10° 30° 50° 10° 30° 60°

Optical Accessories: HL1 Honeycomb Louver, 1/8” (3mm) Thick FR Frosted Lens RT Rectilinear Spread Lens Finishes: (See Page 31 ) FIN-AB, FIN-BK, FIN-BS, FIN-DB, FIN-NK, FIN-RB, FIN-V • Unfinished Brass Requires No Finish Suffix Specification Example: Model—Lamp—Accessories—Finish L9—4W-SP—HL1—FIN-DB

18

L-009/L9

4.5” (11.4cm) Diam. x 1” (2.5cm) Height Above Grade x 7.5” (19cm) Depth Below Grade


In-Grade Uplights [Halogen, Metal Halide] Beachside’s L-010 Series can be used with Halogen and Metal Halide sources, at various voltages. A solid brass cover plate is attached to a heat resistant composite housing. Lamp-attached optical accessories can be used, as well as an external glare shield and brass protection grate. Optional concrete ring allows installation in to concrete. CSA listed. IP67.

L-010 L-010-B L-010-B-230V

(12V) (120V) with Integral Transformer (230V) with Integral Transformer

Lamp: MR16 Halogen IR Type Lamp, 50 watt Maximum. See Lamp Manufacturer for ANSI Codes for IR Type Lamps Available.

L-010-A L-010-A-230V

(120V) with Integral Ballast (230V) with Integral Ballast

Lamp: Ceramic Metal Halide MR16 Lamp; 3000K, 35 watt Maximum. 20SP 20NFL 20FL 35SP 35NFL 35FL

20 watt Spot 20 watt Narrow Flood 20 watt Flood 35 watt Spot 35 watt Narrow Flood 35 watt Flood

10° 25° 40° 10° 25° 40°

Accessories: CR PG

Brass Concrete Ring for Flush Installation Brass Protection Grate

Optical Accessories: BGS2 FR-MR16 HL-MR16 RT-MR16

Brass Glare Shield Frosted Glass (lamp attached accessory) Honeycomb Louver (lamp attached accessory) Honeycomb Louver (lamp attached accessory)

L-010 / L-010B

Shown with CR, PG, and BGS2 accessories

6.5” (16.5cm) Diam. x 7.8” (19.8cm) Depth [12 volt] or 9.4” (23.9cm) [120V / 230V]

Finishes: ( See Page 31 ) FIN-AB, FIN-BK, FIN-BS, FIN-DB, FIN-NK, FIN-RB, FIN-V • Unfinished Brass Requires No Finish Suffix Specification Example: Model—Lamp Code—Accessory(ies)—Finish L-010—FMW—PG—HL-MR16—FIN-DB

L-010-A

6.5” (16.5cm) Diam. x 9.4” (23.9cm) Depth

19


In-Grade Uplights [Halogen, LED] The small footprint of the E9-R-CR and E9-SQ-CR make the them for ideal for architectural uplighitng within solid surfaces. These fixtures operate at 12 Volts, and require a remote transformer. Fixtures feature a collar to pour around, allowing flush installation at grade. CSA Listed. IP67.

E9-R-CR E9-SQ-CR

(Round) (Square)

Lamp: 12V MR16 Halogen IR Type, 20 watt Max. See Lamp Manufacturer for ANSI Code for Available IR Lamps. or LED 12 Volt (9 – 15V AC); 3000K; Integral Driver 3W-SP 3W-NFL 3W-FL 4W-SP 4W-NFL 4W-FL 12W-SP 12W-NFL 12W-FL

3 watt 3 watt 3 watt 4 watt 4 watt 4 watt 12 watt 12 watt 12 watt

10° 30° 50° 10° 30° 50° 10° 30° 60°

Optical Accessories: FR Frosted Lens HL1 Honeycomb Louver, 1/8” (3mm) Thick HL2 Honeycomb Louver, 1/4” (6mm) Thick RT Rectilinear Spread Lens Finishes: ( See Page 31 ) FIN-AB, FIN-BK, FIN-BS, FIN-DB, FIN-NK, FIN-RB, FIN-V • Unfinished Brass Requires No Finish Suffix

E9-R-CR

3.8” (9.6cm) Diam. x 5.3” (13.5cm) Depth

Specification Example: Model—Lamp—Accessory(ies)—Finish E9-R-CR—4W-NFL—HL1—FIN-DB

E9-SQ-CR 20

4.3” (10.9cm) x 4.3” (10.9cm) x 5.3” (13.5cm) Depth


Steplights [Halogen, LED] The E9 Series steplights provide a low profile and small fixture footprint, with an emphasis on glare-free illumination. Louvers angled at 30° provide allow light both beneath and out from the fixture. The spacing of the small louvers prevents glare, even with the fixture mounted at eye-level. The E9s feature 12 Volt Halogen and LED sources, while varying optics combine with standard frosted glass to allow different effects without striations. Two mounting options allow the faceplate to either sit prow of the surface, or fully recessed within a concrete trim ring. CSA Listed. IP67.

E9-R-CR E9-SQ-CR

(Round) (Square)

Lamp: 12V MR16 Halogen IR Type, 20 watt Maximum. See Lamp Manufacturer for ANSI Code for Available IR Lamps. or LED 12 Volt (9 – 15V AC); 3000K; Integral Driver 3W-SP 3W-NFL 3W-FL 4W-SP 4W-NFL 4W-FL 12W-SP 12W-NFL 12W-FL

3 watt 3 watt 3 watt 4 watt 4 watt 4 watt 12 watt 12 watt 12 watt

10° 30° 50° 10° 30° 50° 10° 30° 60°

2W-A-SP 2W-A-NFL 2W-A-FL 4W-A-SP 4W-A-NFL 4W-A-FL

2 watt amber 2 watt amber 2 watt amber 4 watt amber 4 watt amber 4 watt amber

10° 30° 50° 10° 30° 60°

E9-RCL

3.0” (7.6cm) x 4” (10.2cm)

Optical Accessories: FR Frosted Lens HL1 Honeycomb Louver, 1/8” (3mm) Thick RT Rectilinear Spread Lens Finishes: ( See Page 31 ) FIN-AB, FIN-BK, FIN-BS, FIN-DB, FIN-NK, FIN-RB, FIN-V • Unfinished Brass Requires No Finish Suffix Specification Example: Model—Lamp—Accessory(ies)—Finish E9-R-CR—4W-NFL—HL1—FIN-DB

E9-RL

3.5” (8.9cm) Diameter

E9-SQL

4.0” (10.2cm) x 4.0” (10.2cm)

21


Steplights [LED, Halogen, Xenon] The E12, L-012, and L-012F share the same cast brass faceplate and use 12 Volts, but operate completely differently. The L-012 and E12 are both recessed fixtures with flat glass. The E12 uses Beachside’s LED modules, while the L-012 uses the MR16 IR halogen lamp. Both models emphasize the throw of the light outward. The L-012F is a surface mounted fixture, utilizing a domed frosted glass within the brass “hood” to accommodate a small bi-pin halogen or xenon lamp, with emphasis on dispersing light downward. CSA Listed. IP67.

E12 / L-012 Lens: FR RT

Tempered Frosted Soda Lime (standard) Tempered Rectilinear Spread Lens

E12

Lamp: LED, 12 Volt (9 – 15V AC); Integral Driver 3, 4, or 12 watt warm white (3000K); 2 or 4 watt amber (1350K) 3W-SP 3W-NFL 3W-FL 4W-SP 4W-NFL 4W-FL 12W-SP 12W-NFL 12W-FL

3 watt 3 watt 3 watt 4 watt 4 watt 4 watt 12 watt 12 watt 12 watt

10° 30° 50° 10° 30° 50° 10° 30° 60°

2W-A-SP 2W-A-NFL 2W-A-FL 4W-A-SP 4W-A-NFL 4W-A-FL

2 watt amber 2 watt amber 2 watt amber 4 watt amber 4 watt amber 4 watt amber

10° 30° 50° 10° 30° 60°

L-012 / E12 4.4” (11.1 cm) Diameter x 2.1” (5.2cm) Ext. x 4.5” (11.4cm) Recessed Depth

L-012

Lamp: 12 Volt MR16 Halogen IR Type, 50 watt Max. See Lamp Manufacturer for ANSI Code for Available IR Lamps.

L-012F-C

Combustible Installation (wood and/or vinyl) Lamp: 12V Bi-pin Xenon 15 watt Max; or Halogen 10 watt Max. 10X 10 wat t xenon 15X 15 wa t t xe n on 10H 10 watt halogen

L-012F-NC

Non-Combustible Installation (concrete and/or masonry) Lamp: 12V Bi-pin Xenon 20 watt Max; or Halogen 35 watt Max. 20X 20 wat t xenon 20H 20 watt halogen 35H 35 watt halogen Lens: Frosted Borosilicate Domed Glass Finishes: ( See Page 31 ) FIN-AB, FIN-BK, FIN-BS, FIN-DB, FIN-NK, FIN-RB, FIN-V • Unfinished Brass Requires No Finish Suffix Specification Examples: Model—Lens—Lamp—Finish E12—FR—3W-FL—FIN-DB or L-012F-C—15X—FIN-NK

L-012F-C / L-012F-NC 4.4” (11.1 cm) Diameter x 2.1” (5.2cm) Extension

22


Specialty L-004A

Fixture can be hung directly from lead wires or loop Lamp: 12 Volt Double Contact Bayonet Base Type Lamp 18W 13W 26W

1 8 watts (standard) 1 3 watts 26 watts

The Following Fixtures are supplied with 18” (45.7cm) long stainless steel cable & male fitting for tree mounting accessory:

E8-H

LED 12 Volt (9 – 15V AC); Integral Driver 3 or 4 watt (3000K); 2 watt amber (1350K) 3W-FL 4W-FL 2W-A-FL

3 watt 4 watt 2 watt amber

50° 50° 50°

• Other optics available.

See specification sheet.

L-004A

3.5” (8.9cm) Diameter x 4.1” (10.4cm) High, including loop

Optical Accessories: BGS8F Brass Glare Shield, Full Cutoff HL8 Honeycomb Louver, 1/8” (3mm) Thick FR8 Frosted Lens

E16-H

Lamp: LED, 12 Volt (9 – 15V AC); Integral Driver 12 watt warm white (3000K) 12W-FL

12 watt

60°

• Other optics available.

See specification sheet.

L-011-H

Lamp: 12 Volt MR16 Halogen IR Type, 50 watt Max. See Lamp Manufacturer for ANSI Code for Available IR Lamps. Optical Accessories: BGSF Brass Glare Shield, Full Cutoff HL1 Honeycomb Louver, 1/8” (3mm) Thick FR Frosted Lens

E8-H E16-H L-011-H

1.6” (4.2cm) Diam. x 4.2” (10.6cm) High, including loop 2.4” (6.1cm) Diam. x 4.7” (12cm) High, including loop 2.4” (6.1cm) Diam. x 5” (12.7cm) High, including loop

E8-H-2x9

Lamp: LED, 12 Volt (9 – 15V AC); Integral Driver 3 watt (3000K); 2 watt amber (1350K) 3W-FL 3W-NO 2W-A-FL 2W-A-NO

3 watt 3 watt 2 watt amber 2 watt amber

50° 120° 50° 120°

Tree Mounts: ( See Page 32 ) TDM1, TDM2, TDM2-SS, TDM3, TDM4, TMJB, TMJBX Finishes: ( See Page 31 ) FIN-AB, FIN-BK, FIN-BS, FIN-DB, FIN-NK, FIN-RB, FIN-V • Unfinished Brass Requires No Finish Suffix Specification Example: Model—Lamp—Accessory(ies)—Finish E8-H—3W-FL—HL8—TDM1—FIN-DB

E8-H-2x9

2.4” (6.1cm) Diam. x 10.3” (26cm) High, including loop

23


Specialty E1

Post Mounted Downlight Lamp: LED, 12 Volt (9 – 15V AC); Integral Driver 3 or 4 watt (3000K); 2 watt amber (1350K) 3W-FL 3 watt 50° 3W-NO 3 watt 120° 4W-FL 4 watt 50° 4W-NO 4 watt 120° 2W-A-FL 2 watt amber 50° • Other optics available.

See specification sheet.

Optical Accessories: HL8 Honeycomb Louver, 1/8” (3mm) Thick FR8 Frosted Lens Finishes: ( See Page 31 ) FIN-AB, FIN-BK, FIN-BS, FIN-DB, FIN-NK, FIN-RB, FIN-V • Unfinished Brass Requires No Finish Suffix Specification Example: Model—Lamp—Accessory(ies)—Finish E1—3W-FL—HL8—FIN-DB

E1

2” (5cm) Width x 3.9” (10cm) High x 1.9” (4.8cm) Extension

R-021

Decorative Lantern Illuminator Stem Height: None (standard), 4” (10cm) or 8” (20cm) Lamp: 12 Volt G4 & GY6.35 Halogen (2900K); G4 Xenon (2600K) 10H 1 0 watt halogen 20H 20 watt halogen 35H 35 watt halogen 10X 1 0 watt xenon 15X 1 5 watt xenon 20X 20 watt xenon Finishes: ( See Page 31 ) FIN-AB, FIN-BK, FIN-BS, FIN-DB, FIN-NK, FIN-RB, FIN-V • Unfinished Brass Requires No Finish Suffix Specification Examples: Model—Stem Height (if any)—Lamp—Finish R-021—15X—FIN-BK

R-021

4.1” (10.4cm) Base Diameter x 3.8” (9.7cm) High

L-020-B

Brass Underwater Fixture by Focus Industries. 12V MR16 Halogen IR Type Lamp, 50 watt Maximum. See Lamp Manufacturer for All MR16 IR Type Lamps Available.

L-020-B

4” (10.1cm) x 4.5” (11.4cm) Base x 5” (12.7cm) High; 3.3” (8.4cm) Diam.

24


Projection L-011-P L-011-P-H L-011-P-CM1 L-011-P-CM2

Landscape * Landscape (hanging) * Single Head on 5” Diam. Canopy * Dual Head on 5” Diam. Canopy * *Remote Transformer Required

L-011-P-120V L-011-P-230V L-011-P-CM1-120V L-011-P-CM1-230V L-011-P-CM2-120V L-011-P-CM2-230V

Landscape with Base Transformer, 120 Volts Landscape, with Base Transformer, 230 Volts Single Head on Canopy, 120V Single Head on Canopy, 230V Dual Head on Canopy, 120V Dual Head on Canopy, 230V

12V MR16 Halogen IR Type Lamp, 50 watt Maximum. Narrow Flood (25° – 30° Beam) Required. See Lamp Manufacturer for All MR16 IR Type Lamps Available. or LED-9W-NFL MR16 Retrofit LED, 25°, 3000K, Single Chip, Enclosed Fixture Rated.

L-011-P-MH-120V L-011-P-MH-230V L-011-P-CM1-MH-120V L-011-P-CM1-MH-230V

Landscape, Metal Halide 120 Volts. Landscape, Metal Halide 230 Volts. Single Head Metal Halide Lamp on Canopy, 120 Volt Input. Single Head Metal Halide Lamp on Canopy, 230 Volt Input.

L-011-P-CM1 2.4” (6.3cm) x 6.4” (16.3cm) x 5” (12.7cm) Canopy

CMH MR16 Lamp, 3000K, Narrow Flood 35 watt Maximum. 20NFL 20 watt Narrow Flood 35NFL 35 watt Narrow Flood Gobo Pattern: By Others. 52mm Diam. (required) x 34mm Diam. Image Area (recommended) Tree Mounts: ( See Page 32 ) TDM1, TDM2, TDM2-SS, TDM3, TDM4, TMJB, TMJBX TMBB

Tree Mounted Brass Ballast Box for Metal Halide Landscape Applications

Finishes: ( See Page 31 ) FIN-AB, FIN-BK, FIN-BS, FIN-DB, FIN-NK, FIN-RB, FIN-V • Unfinished Brass Requires No Finish Suffix Specification Example: Model—Lamp—Accessory—Finish L-011-P—9W-NFL—FIN-DB

25


Architectural — Recessed The L-016 and L-016-F recessed fixtures combine the flexibility of a standard MR16 lamp with the corrosion resistance expected from a Beachside fixture. The gaskets on the brass trims securely seal up against the bottom of the recessed 4” can, consistent with the fixture’s wet location listing. An internal brass bracket allows angling of the lamp, while a brass ring allows full rotation. Integral 120V – 12V transformer. Also available as a remodel version. IP 66.

L-016 L-016-F

Extended Trim, 30° Angling, (new construction) Flat Trim, 15° Angling, (new construction)

12V MR16 Halogen IR Type Lamp, 50 watt Maximum. See Lamp Manufacturer for All MR16 IR Type Lamps Available. or LED-9W-NFL MR16 Retrofit LED, 25°, 3000K, Single Chip, Enclosed Fixture Rated.

L-016R L-016R-F

Extended Trim, 30° Angling, (remodel) Flat Trim, 15° Angling, (remodel)

12V MR16 Halogen IR Type Lamp, 35 watt Maximum. See Lamp Manufacturer for All MR16 IR Type Lamps Available. or LED-9W-NFL MR16 Retrofit LED, 25°, 3000K, Single Chip, Enclosed Fixture Rated. Lens: CL Clear Tempered Glass FR Frosted Tempered Glass Accessory: HL16 HL-MR16

L-016

5” (12.7cm) x 0.8” (2cm) Trim x 5.5” (14cm) Can Depth

Honeycomb Louver w/ Snap Ring (L-016 / L-016R) Honeycomb Louver, Lamp Attached, (L-016-F / L-016R-F)

Finishes: ( See Page 31 ) FIN-AB, FIN-BK, FIN-BS, FIN-DB, FIN-NK, FIN-RB, FIN-V, FIN-WH • Unfinished Brass Requires No Finish Suffix Specification Example: Model—Lamp—Accessory—Finish L-016—LED—9W-NFL—FIN-WH

L-016-F

26

5” (12.7cm) x .125” (3mm) Trim x 5.5” (14cm) Can Depth


Architectural—Directional E2

Ceiling Mounted Fixed Downlight Lamp: LED, 12 Volt (9 – 15V AC); Integral Driver 3 or 4 watt (3000K); 2 watt amber (1350K) 3W-FL 3 watt 50° 4W-FL 4 watt 50° 2W-A-FL 2 watt amber 50° • Other optics available.

See specification sheet.

Optical Accessories: BGS8F Brass Glare Shield, Full Cutoff HL8 Honeycomb Louver, 1/8” (3mm) Thick FR8 Frosted Lens Specification Example: Model—Lamp—Accessory(ies)—Finish E2—4W-FL—HL8—FIN-DB

E16-CM E16-CM1 E16-CM2

LED Fixed Ceiling Mounted Downlight

E2

2.7” (7cm) Canopy x 1.6” (4cm) Fixture Diam. x 4.0” (10cm) Length

LED Adjustable Single Downlight LED Adjustable Dual Downlight

Cree XP-G LED: 12 watt (3000K); or 4 watt amber (1350K) 12W-FL 12 watt 60° 4W-A-FL 4 watt amber 60° • Other optics available.

See specification sheet.

L-011-CM L-011-CM1 L-011-CM2

Halogen Fixed Ceiling Mounted Downlight Halogen Adjustable Single Downlight Halogen Adjustable Dual Downlight

MR16 Halogen IR Type Lamp, 50 watt Maximum. See Lamp Manufacturer for All MR16 IR Type Lamps Available. Standard fixture is 12 volts. Line voltage version available by specifying “120V” or “230V” after fixture model, and adds 1.62” (4.1cm) to canopy extension. Example: L-011—CM2—120V—BAB—FIN-V

W16-CM W16-CM1

E16-CM1 2.4” (6.1cm) x 4.4” (11.1cm) x 5.0” (12.7cm) Canopy L-011-CM1 / W16-CM1 2.4” (6.1cm) x 4.9” (12.4cm) x 5.0” (12.7cm)

Ceiling Mounted Fixed Metal Halide Downlight

Adjustable Metal Halide Single Downlight Voltage: 120V, 230V, 277V. Specify Voltage After Fixture Model. Lamp: GX10 Base CMH MR16, 35 watt Max., 3000K 20SP 20 watt Spot 35FL 35 watt Flood • Other CMH MR16 lamps available. See specification sheet.

Optical Accessories for E16, L-011, and W16 Series: BGS Brass Glare Shield, 45° BGSF Brass Glare Shield, Full Cutoff FR Frosted Lens HL1 Honeycomb Louver, 1/8” (3mm) Thick Finishes: ( See Page 31 ) FIN-AB, FIN-BK, FIN-BS, FIN-DB, FIN-NK, FIN-RB, FIN-V, FIN-WH • Unfinished Brass Requires No Finish Suffix Specification Example: Model—Voltage—Lamp—Accessory(ies)—Finish W16-CM1—120V—20SP—HL1—FIN-DB

E16-CM2 L-011-CM2

2.4” (6.1cm) x 4.4” (11.1cm) x 5.0” (12.7cm) Canopy 2.4” (6.1cm) x 4.9” (12.4cm) x 5.0” (12.7cm) Canopy

27


Architectural E13

Wall Mounted LED Fixed Up / Downlight LED: 12 Volt (9 – 15V AC); Integral Driver; Remote Transformer Required. Cree XP-G LED (x2): 3 or 4 watt (3000K); 12 watt amber (3000K) 3W-FL 3 watt 50° 4W-FL 4 watt 50° 12W-FL 12 watt 60° • Other optics available.

See specification sheet.

L-013-S

Wall Mounted Halogen Fixed Up / Downlight • Other CMH MR16 lamps available. See specification sheet.

E14

Wall Mounted LED Fixed Downlight 12 Volt (9 – 15V AC) Only; Integral Driver Remote Transformer Required. Cree XP-G LED: 3 or 4 watt (3000K); 12 watt (3000K) 3W-FL 3 watt 50° 4W-FL 4 watt 50° 12W-FL 12 watt 60°

E13 L-013-S

2.4” (6.1cm) x 9.5” (24.1cm) x 3.7” (9.4cm) Extesion 2.4” (6.1cm) x 9.0” (22.8cm) x 3.7” (9.4cm) Extension

• Other optics available.

See specification sheet.

L-014-S

Wall Mounted Halogen Fixed Up / Downlight MR16 Halogen IR Type Lamp, 50 watt Maximum. See Lamp Manufacturer for All MR16 IR Type Lamps Available.

Standard fixtures are 12 volts. Line voltage version available by specifying “120V” or “230V” after fixture model, and adds 1.62”. (4.1cm) to canopy extension. Example: L-013-S—120V—BAB—FIN-WH

W14

Wall Mounted Fixed Metal Halide Downlight Voltage: 120V, 230V, 277V. Specify Voltage After Fixture Model. Lamp: GX10 Base CMH MR16, 35 watt Max., 3000K 20SP 20 watt Spot 35FL 35 watt Flood • Other CMH MR16 lamps available. See specification sheet.

Optical Accessories for E13, E14, L-013, L-014 & W14 Series: FR Frosted Lens HL1 Honeycomb Louver, 1/8” (3mm) Thick Finishes: ( See Page 31 ) FIN-AB, FIN-BK, FIN-BS, FIN-DB, FIN-NK, FIN-RB, FIN-V, FIN-WH • Unfinished Brass Requires No Finish Suffix Specification Examples: Model—Voltage—Lamp—Accessory(ies)—Finish E14—120V—4W-FL—FR—HL1—FIN-DB or W14—120V—20FL—HL1—FIN-NK

28

E14 L-014-S W14

2.4” (6.1cm) x 6.3” (16.1cm) x 3.7” (9.4cm) Extension 2.4” (6.1cm) x 5.7” (14.6cm) x 3.7” (9.4cm) Extension 2.4” (6.1cm) x 6.9” (17.5cm) x 5.3” (13.5cm) Extension


Architectural L-013-R3-S

Wall Mounted Decorative Shade / Downlight Lamp top: Bi-pin halogen or xenon, 35 watt max. 20X 20 watt xenon 35H 35 watt halogen Lamp bottom: MR16 Halogen IR Type Lamp, 50 watt Maximum. See Lamp Manufacturer for All MR16 IR Type Lamps Available. or LED-9W-NFL MR16 Retrofit LED, 25°, 3000K, Single Chip, Enclosed Fixture Rated. Standard fixture is 12 volts. Line voltage version available by specifying “120V” or “230V” after fixture model, and adds 1.62” (4.1cm) to canopy extension. Finishes: (See Page 31) FIN-AB, FIN-BK, FIN-BS, FIN-DB, FIN-NK, FIN-RB, FIN-V, FIN-WH • Unfinished Brass Requires No Finish Suffix Specification Example: Model—Voltage—Lamps—Finish L-013-R3-S—120V—20X—BAB—FIN-NK

L-013-R3-S

9.9” (25.1cm) High x 9.6” (24.4cm) Extension

L-023

6.5” (16cm) High x 3.7” (9.4cm) Extension

L-024

10.3” (26.2cm) High x 3.7” (9.4cm) Extension

L-023

Incandescent Sconce Illuminator, Dimmable. 12 Volt, Remote Transformer Required. Lamp: Bi-pin Halogen or Xenon, 35 watt Max. (x 2) 15X 1 5 watt xenon 20X 20 watt xenon 20H 20 watt halogen 35H 35 watt halogen Accessories: T80 T80-230V

80 watt Electronic Transformer (120 Volt) 80 watt Electronic Transformer (230 Volt)

Finishes: ( See Page 31 ) FIN-AB, FIN-BK, FIN-BS, FIN-DB, FIN-NK, FIN-RB, FIN-V, FIN-WH • Unfinished Brass Requires No Finish Suffix Specification Example: Model—Lamps—Accessory—Finish L-023—20X—T80—FIN-DB

L-024

Fluorescent Sconce Illuminator, Not Dimmable. Lamp (120 Volt): 9CFL 9 watt CFL, 2700K, GU24 Base (x 2) 13CFL 13 watt CFL, 2700K, GU24 Base (x 2) Lamp (230 Volt): 8CFL

8 watt CFL, 2700K, E27 Base (x 2)

Finishes: ( See Page 31 ) FIN-AB, FIN-BK, FIN-BS, FIN-DB, FIN-NK, FIN-RB, FIN-V, FIN-WH • Unfinished Brass Requires No Finish Suffix Specification Example: Model—Voltage—Lamp—Finish L-024—120V—9CFL—FIN-DB

29


Copper Sconces for L-023 / L-024

BOP 24x8

Custom 24”x 8” (61cm x 20cm) Bird of Paradise Sconces at a St. Thomas, USVI residence

BOP-12x6

12” (30.5cm) High x 6” (15.2cm) Wide x 4” (10cm) Ext.

LAU-12x6

12” (30.5cm) High x 6” (15.2cm) Wide x 4” (10cm) Ext.

30

PLM-12x6

WAA-12x6

12” (30.5cm) High x 6” (15.2cm) Wide x 4” (10cm) Ext.

12” (30.5cm) High x 6” (15.2cm) Wide x 4” (10cm) Ext.


Finishes All of Beachside Lighting’s fixtures are produced using unfinished brass and copper. Since there is no coating over them, the fixtures will soon weather to a natural brown color at inland locations, while developing a green verde finish at near ocean locations. In addition, we offer (8) different finish choices. Six of them are acid finishings producing a range of colors. While there is a lacquer coating over the finish, ultimately in a salt-air environment, an acid finished fixture will develop hints of a natural green patina, eventually giving way entirely to this coloring at the closest of oceanfront locations. In addition, we use a dull, brushed nickel plating to replicate the look of stainless, without the concern of rust, which can develop even in stianless steel. Lastly, we produce a white powder-coating fixture for architectural applications, We typically recommend that powdercoated fixtures get used in more protected locations. Because the environment varies from the ocean to the mountains, we do not warranty any of our finishes. However, unlike powder coated aluminum fixtures, the specifier has the peace of mind that Beachside’s brass and copper fixtures will withstand the elements, regardless of finish.

FIN-AB

FIN-DB

FIN-V

Antique Brass

FIN-BK

Black

FIN-BS

Dark Bronze

FIN-NK

Brushed Nickel Plating

FIN-RB

Verde

FIN-WH

White Powder Coating

Blue Steel

Red Bronze

Unfinished Fixture Near Ocean

31


Accessories

GS4

9.1” (23cm) x 2.9” (7.4cm)

Ground Spike with Brass Cap

JB

3.8” (9.6cm) x 3” (7.6cm)

Brass Junction Box with (2) ¾” Side and Bottom Taps

TDM3

2.8” (7.1cm) x .8” (2cm)

Low Profile Canopy. Use of SA Accessory Recommended.

FR / FR8

Frosted Glass Accessory

GS2

19” (48cm) x 3.3” (8.4cm)

Heavy Duty Ground Spike

SA

GS2 with Heavy Brass Cap

TDM1

GS3R

19” (48cm) x 3.3” (8.4cm)

Allows Fixture’s Own Stem to Telescope as Foliage Grows.

TDM2-SS

Sure Aim Locking Rotation Eliminates Need for Locknut

2.7” (6.8cm) x 3.0” (7.6cm) x 1.5” (3.8cm) ext

2.7” (6.8cm) x 3.0”(7.6cm) x 1.5” (3.8cm) ext.

TDM4

TMJB(1 hole) / TMJB2 2 hole)

TMJBX(1 hole) / TMJB2X(2 hole)

Canopy with Notch for Wire. Use of SA Recommended.

Tree Mounted Junction Box with Stainless Steel Strap

Tree Mounted Junction Box with Stainless Screws

2.8” (7.1cm) x .8” (2cm)

HL1 / HL8 HL2

1/8” (3mm) Thick 1/4” (6mm) Thick

Honeycomb Louver Accessory

32

GS2BC

19” (48cm) x 3.3” (8.4cm)

Tree Mount with SS Screws

3.8” (9.6cm) D x 1.7” (4.3cm) ext.

RT / RT8

Rectilinear Spread Lens

Tree Mount with SS Strap

3.8” (9.6cm) D x 1.7” (4.3cm) ext.

HSM

Half Shield with Top Cap for M / MB Series


Transformers / Ballasts

TRH

GL200 GL Series

Stainless Steel Transformer 120V Input with 12 & 15 Volt Output Taps 11.3”H x 5.75”W x 5.5”D (28.7cm x 14.6cm x 14cm) GL100 100 watt Capacity GL200 200 watt Capacity

TRH-120V / TRH 230V

Solid Brass Above Grade Transformer at Fixture Base with ½” Male Fitting. 2.4” Diam. x 4” High (6.1cm x 10cm)

TRH-120V TRH-230V

For 120 Volt Applictions For 230 Volt Applications

MTP Series

Stainless Steel Transformer 120V Input with 11 - 15 Volt Output Taps. 14”H x 6.5”W x 5.5”D (35.5cm x 16.5cm x 14cm) MTP300 300 watt Capacity

RB Series

Options (add as suffix to model) Mechanical Plug-in Timer Photocell, Field Installed Photocell Kit with Timer Digital Timer with Battery Backup Remote Photocell on 20' Cord with 2 – 8 Hour Timer

Specification Examples: GL200—DT or MTP300—230V—P

DBMH DBMH Series

Solid Brass Cylindrical Metal Halide Ballast Complete with Brass Cap & GS2 Spike. Ballast fits within Ground Spike to be completely out of sight. For 20 and 35 watt CMH Lamps.

DBMH-20 DBMH-35 DBMH-UV-20

DBMH-UV-35

20 watts, 120V Input 35 watts, 120V Input 20 watts, 230—277 V 35 watts, 230—277 V

Brass Tree-Mounted Ballast Box for 20 and 35 watt CMH Lamps. 4.5”L x 3”W x 2.3”D (11.4cm x 7.6cm x 5.8cm) TMBB-20 TMBB-35 TMBB-UV-20 TMBB-UV-35

20 watts, 35 watts, 20 watts, 35 watts,

SB Series SB Series

TMBB Series

MPT600 Terminal Block

DB Series

Direct Burial Transformer 120 V In pu t with 12 Volt O ut put Tap 11.8” x 7.4”W x 4.5”D (30cm x 18.8cm x 11.4cm) DB-150 150 watt Capacity (1 circuit) DB-300 300 watt Capacity (1 circuit) DB-600 600 watt Capacity (2 circuits)

Remote Direct Burial Metal Halide Ballast with long distance igniter. Not for direct fixture mounting—use other mounting accessories. RB-35-120V 35 watts RB-70-120V 70 watts RB-100-120V 100 watts •Use “—230V” Suffix for 230V Applications

17”H x 9”W x 5.5”D (43cm x 22.8cm x 15.2cm) MTP600 600 watt Capacity MTP1200 1200 watt Capacity Control T P TP DT TRP

DB Series (LED & Halogen) RB Series (Metal Halide) Composite Boxes

120V Input 120V Input 230—277 V 230—277 V

Stainless Wall Mounted Metal Halide Ballast with Long Distance Igniter. 7” x 6”W x 4”D (17.8cm x 15.3cm x 10cm SB-35-120V 35 watts SB-70-120V 70 watts SB-100-120V 100 watts •Use “—230V” Suffix for 230V Applications

33


Traditional Conical Torches

TK-1-P TK-1-N TK-1-P

(Natural Gas)

(Propane Gas) 7.5” Diam. x 11.5” High (19cm x 29cm) • Pole By Others

Construction: Spun Copper (seamless), 18ga. (.043” thick) Solid Brass Machined Fittings. Perforated Stainless Steel Top Screen. Gas Consumption: TK-1-N: 23,404 Btu / Hour (7” water column) TK-1-P: 18,585 Btu / Hour (11” water column) Installation: 1” NPT Female Brass Adapter to Connect to 1” NPT Male Pipe (by others). 1” Brass Valve Included. Consult Installation Diagram. Ignition: Manual Ignition with Extended Lighter

(

CSA/AGA Design Certified per IAS Requirement 8-96 (#190030-1711907)

TK-1-K

(Kerosene/Citronella) 7.5” Diam. x 9.5” High (19cm x 24cm) • Pole By Others

Construction: Spun Copper (seamless), 18ga. (.043” thick). Solid Brass Machined Fittings. Fuel: Kerosene or Citronella, 45 oz. Capacity Wick: Braided Cotton Torch Wick 1” Diam. x 12” Long Pole: 1” Copper w/ Male Adapter (by others) or Galvanized Steel (by others)

34

TK-1-K

Photo Courtesy of HAWAI’I GAS


Malama™ Torches The Malama Torch™ was created by Native Hawaiian artist Donald Namohala Yuen in 1967. Today, his daughter Leilehua Yuen and her husband, Manu Josiah, continue to handcraft each decorative stainless steel Malama Torch™ cylinder used with Beachside’s burner assembly. Natural Gas Torches

TK-N-BOP TK-N-LAU * TK-N-OHE TK-N-PUA TK-N-WAA* TK-N-WTH

Bird of Paradise Laua’e Fern Bamboo Flower Sailing Canoe Waratah Flower

Propane Gas Torches

TK-P-BOP TK-P-LAU * TK-P-OHE TK-P-PUA TK-P-WAA* TK-P-WTH

Bird of Paradise Laua’e Fern

BOP

Bird of Paradise

LAU

Laua’e Fern

Bamboo Flower Sailing Canoe Waratah Flower * Not CSA Listed at Time of Publication

Construction: 3.8” Diam. x 16” High (9.6cm x 40.6cm) Stainless Steel Cylinder & Base, 26 ga. Solid Brass Machined Gas Fittings. Perforated Stainless Steel Top Screen. • Pole By Others Gas Consumption: TK-N: 22,000 Btu / Hour (7” water column) TK-P: 15,000 Btu / Hour (11” water column) Installation: OHE 1” NPT Female Brass Adapter to Connect to 1” NPT Bamboo Male Pipe (by others). 1” Brass Valve Included. Consult Installation Diagram.

PUA

Flower

Ignition: Manual Ignition with Extended Lighter. CSA/AGA Design Certified per IAS Requirement 8-96 (#190030-1711907)

TK-N-PUA Cusom in Waikiki

WAA

Sailing Canoe

WTH

Waratah Flower

35


Beachside Lighting (800) 405-6732 (808)263-5717 BeachsideLighting.com 905 Kalanianaole Hwy. #29A, Kailua, Hawaii USA


Beachside Lighting Catalogue