7901

Business Guide Metal-Alliance.be

THE FACTO RY AUTO MAT I ON C OMPA NY

Intelligent ideas for smart factories EASE OF USE | SMART | CUSTOMISE | PERFORMANCE

FANUC Benelux BVBA | +32 15 78 00 00 | info@fanuc.be | WWW.FANUC.EU

CNC, MOTION, LASER, RETROFIT

ROBOTS COBOTS

ROBOCUT

Wire-Cut Electric Discharge Machines

ROBODRILL

CNC Machining Centres

ROBOSHOT

Injection Moulding Machines

ROBONANO

Ultra Precision Machine

Business Guide Metal-Alliance.be

BRANDED CONTENT

Uw partner wanneer precisie een must is!

Vanaf de oprichting in 1976 heeft De Ridder zich ontwikkeld tot een begrip op de BeNeLux markt als importeur van hoogproductieve, verspanende precisie metaalbewerkingsmachines. Op dit gebied vertegenwoordigt De Ridder gerenommeerde Zwitserse, Duitse, Oostenrijkse en Japanse fabrieken met onder andere: STUDER, BLOHM/JUNG, SCHAUDT MIKROSA op het gebied van slijpen; SODICK voor het eroderen; EMCO, FFG BOEHRINGER, MICROCUT voor het draaien, YASDA, HELLER, AXA, EMCO, MICROCUT, MAPLE, KUNZMAN en PAMA voor het frezen.

De Ridder is een ISO9001:2015 gecertificeerd bedrijf met ca. 30 buitendienst techniekers, welke beschikken over zeer ruime productkennis zowel op mechanisch als elektronisch gebied. Onze buitendienst mensen zijn onder andere VCA gecertificeerd. Door aanvullende diensten aan te bieden leveren wij een totaalpakket “zorgeloos metaalbewerken”.

U kunt bij ons o.a. terecht voor preventief onderhoud, inbedrijfstelling en scholing, revisie en deelrevisie, werkplaats toebehoren en niet in de laatste plaats voor automatisering.

Het huidige leveringsprogramma is samengesteld uit zorgvuldig geselecteerde producten, afgestemd op uw behoeften en wensen. De Ridder streeft naar langdurige relaties met haar afnemers door het geven van goede adviezen bij de verkoop en hen professioneel te ondersteunen bij installatie, scholing, reparatie en onderhoud van geleverde productiemiddelen.

Teneinde dit te realiseren worden service technici voortdurend via trainingen op de hoogte gebracht van nieuwe onwikkelingen op hun vakgebied.

Het huidige leveringsprogramma omvat een zeer breed scala aan zowel conventionele, Teach-In als CNC gestuurde verspanende machines voor de volgende bewerkingen:

De Ridder in de BeNeLux Met twee handelsondernemingen, De Ridder THO (Nederland) en De Ridder TDR (België en Luxemburg), dekt De Ridder de BeNeLux af, waarbij u als klant uw voordeel doet met uitgebreide knowhow en kennis van zaken.

Dit alles ondersteund door één centraal in Best gelegen service organisatie, met eigen TechCenter en applicatiespecialisten: De Ridder SRM.

2

• Draaien • Frezen • Slijpen • Eroderen Zowel voor de fabricage van kleine en middelgrote fijnmechanische producten, instrumenten, precisie gereedschappen, alsook voor hoogproductieve massaproductie vindt u bij ons niet alleen de passende machine, maar uiteraard ook daarbij behorend technisch toebehoren, handlingsystemen, slijpmiddelen, verbruiksartikelen en occasion machines. Deze producten bieden u uitstekende mogelijkheden om uw productiemiddelen nog efficiënter in te zetten.

De Ridder TDR B.V.V.A. - Boomsesteenweg 690 - 2610 Wilrijk - Belgium - T +32 (0)2-7628910 - www.ridder.net

METAL-ALLIANCE.be Production technology for the metalworking industry: machines, tooling, welding tools, automation, robotics, software and metrology for the metalworking industry Metal-Alliance.be is the Agoria business group of production technology suppliers to the metalworking industry in Belgium. Our members offer metal-cutting and sheet metalworking machine tools, cutting tools, welding tools & consumables, automation, robotics, software and metrology. Many of them also offer installation, training, service and maintenance services.

Metalworking companies from all industrial sectors including machine building, automotive, aerospace, power generation, medical products and general engineering will find what they need for more efficient, economical, sustainable, precise and rapid production.

We wish you much success in finding the suitable technology partner for the realisation of your projects!

About this guide In the first part of this guide, a short profile, information on the products and services offered and contact details for each company are listed. At the end of the guide, a grid will help the reader quickly find what companies offer the product or service he or she requires.

Responsible Agoria

For additional copies of the business guide:

Alain Wayenberg

Agoria Communication-Training

Business Group Leader Industries

comm-training@agoria.be

Manufacturing Industries T: +32 2 706 80 03

Manufacturing Industries

T: +32 475 80 88 99

Agoria

alain.wayenberg@agoria.be

Bld. A. Reyerslaan 80

www.agoria.be

B-1030 Brussels

3

123 Automation Engineering & Development >>www.123automation.be Contact: Joël Dersin - Administrateur Délégué - jde@123automation.be Rue des Artisans 4B, 6210 Frasnes-lez-Gosselies (Les Bons Villers) T: +32 71 49 03 21

123 Automation E&D is a company specialising in the analysis, design, development, integration and maintenance of automated solutions aimed at improving productivity in any manufacturing process.

With ten years’ experience and more than thirty success stories, the fields of expertise at 123 Automation E&D are: - Automation of loading and unloading machines (CNC machines etc) - Automation of deburring operations - Automated measure robotcell - Safety of automated environments

4

4D Cam >>www.4dcam.be Contact: Jan Raes - Managing Director - info@4dcam.be Beekveldstraat 67, bus 1, 9300 Aalst T: +32 53 80 45 03

Quality products and our expertise at your service. That is our motto. Many years of experience in CNC programming, software programming, CAD and CAM applications, DNC development and international sales let us believe we can offer you a difference.

We fully understand that our customer’s investment needs to be profitable immediately. Training and support are therefore paramount in order to achieve this goal. These are not only words. We keep our promises.

All the products we offer are known and highly appreciated in the market. Autodesk is a reference software builder, it’s 3D CAM software regarded as top of the best, giving immediate increase in production and a substantial reduction of total costs. Gibbscam is an excellent all-round CAM provider for simple to complex multi-axes, multi-turret and multi-spindle applications. It is an extremely user friendly, yet very affordable CAM for milling, turning and wire-erosion. CIMCO DNC is our communication and administration software for easy access of CNC programs and shopfloor follow-up.

Last but not least, we offer a full software development service for our customers with special wishes in automation, dental and medical application, aerospace application and others.

5

ABB >>www.abb.com/robotics Contact: Martin van der Have - Sales Manager - martin.have@nl.abb.com Hoge Wei 27, 1930 Zaventem T: +31 6 51 23 06 63

ABB is a leading supplier of industrial robots and robot software, equipment and complete application solutions. We’re at home in 53 countries and have installed more than 400,000 robots, supported by the broadest service network and offering in the industry.

6

Absolem Engineers >>www.absolem.be Contact: Bruno Dejaeghere - CEO - info@absolem.be Sint-Katelijnestraat 145, 2800 Mechelen T: +32 15 29 42 45

Absolem Engineers is a family company with a passion for technology, innovation and R&D. After working our magic in the engineering world for 34 years, we have built up a wealth of experience and expertise. And in 2010, we added a fresh and modern vision to give our company a unique combination of insightful experience and a young and dynamic spirit. With our engineering consultants by your side, you’ll be able to expand and deepen your R&D and engineering teams.

We offer you the right engineer at the right place. The average professional experience of our engineering consultants is 20 years. You decide which step(s) in the project will require extra expertise and manpower. They include: - problem identification and examination - concept development - development an (re)design - calculation - prototype construction - testing - delivery

7

Ad Ultima Group >>www.adultimagroup.com Contact: Katrien Talpe - Marketing Manager - katrien.talpe@adultimagroup.com Beneluxpark 7, 8500 Kortrijk T: +32 56 740 740

Co-creating your organization of the future. Ad Ultima Group was founded in 2000 by Filip Bossuyt to sell and implement ERP software. After a phase of rapid growth and several Trends Gazelle awards, Ad Ultima Group is now active in 3 main markets: manufacturing, distribution & complex logistics and building & construction. Sending out more than 230 consultants to clients in Belgium, France & The Netherlands. Combining the technology stack of Microsoft and PTC with their own IP software, Ad Ultima Group has a unique value proposition in the market today.

Combining the technology stack of Microsoft and PTC with their own IP software, Ad Ultima Group has a unique value proposition in the market today. Providing real business value, thanks to 20 years of knowledge in 3 markets, mastering almost every technology solution in a true end-toend vision on a company’s business processes. This helps their clients integrate development and innovation processes with other business processes better, resulting in a shorter time-to-market for products. Ad Ultima Group supports businesses with technology and improves corporate performance. The offerings are: ERP, CRM, PLM, CAD, Document/Process/Data management, MES, IoT and e-business.

8

Adopt id PLM >>www.adopt-id.com Contact: Jurgen Chanterie - Managing director - info@adopt-id.com Peter Benoitstraat 11, 8800 Roeselare T: + 32 51 20 00 28

We are a specialized consultancy company that optimizes and improves the construction- and metal industry with the latest technology. We are the Siemens PLM Partner for the following products in Belgium and Luxemburg: Solid Edge, InsightXT, Came Xpress and Teamcenter and NX CAM.

We offer solutions in the domain of: - CAD (Computer Aided Design) - CAM (Computer Aided Maunfacturing) - PDM (Product Data Management) - PDM (Product Lifecycle Management) - MES (Manufacturing Execution System)

9

AMS Belgium bvba >>www.amsrobotics.com Contact: Jan Comhair - Partner - jan.comhair@amsrobotics.com Kieleberg 5, 3740 Bilzen T: +32 499 99 08 06

AMS is a young, international, dynamic and fast growing organisation. With different departments all over the world Our main task consists in programming and starting up automated production processes with robots and Plc. We also take on projects to automise your production processes. We have experience with a wide range of applications such as spot welding, handling, vision systems, sealing,...

Robot & PLC programming Automation & turnkey projects Offline programming & lasertracking

10

ATS Applied Tech Systems >>www.ats-global.com Contact: Sandra Van Eerdewegh - Marketing - sandra.van.eerdewegh@ats-global.com Koning Albertlaan 1 laan 64, 1780 Wemmel T: +32 2 725 86 58

ATS Applied Tech Systems is “The Independent Solution Provider” for users of industrial and process automation and information technology worldwide. We provide products and services for all three layers of the automation pyramid, namely the control, execution and information layerATS is an innovative, strategic knowledge partner and we offer expertise in seven areas: CNC Programming Control technology SCADA*/HMI** Programming languages Communication & networking Databases Manufacturing Execution Systems Lean Six Sigma & Quality

Since our founding in 1986, we have developed six business activities designed to support the entire life cycle of automation and IT systems.

Edgecam from Vero offers a complete CADCAM solution for all machining operations, such as milling, turning, rotary milling and wire spinning. Even complex machining operations such as 5-axis simultaneous milling can be programmed without any problem. As Strategic Reseller, ATS has been supplying Vero products in the Benelux since 1983. Currently there are more than 1350 Edgecam systems in use in the Benelux. Worldwide, Vero has been able to supply more than 110.000 systems.

Companies choose Edgecam because of the ease of use combined with the powerful functionality.

In addition, the implementation of Edgecam within your company assures you of a high degree of process reliability. This means that so-called ‘dry runs’ belong to the past. This reduces downtime to a minimum and will increase the efficiency of your machinery.

11

Buhlmann >>http://www.buhlmann.be Contact: BĂźhlmann Brice - Managing Director - b.buhlmann@buhlmann.be Hermesstraat 2C, 1930 Zaventem T: +32 2 711 20 46

Over 80 years experience in high end machines-tools business and railway infrastructures.

Project management of complete production lines. Experience in airspace, automotive, railway, medical, energy, electrical, automation, plastic and machines industries.

High end machines-tools for high precision requirement.

High production machines.

Production lines.

Automation for new and already installed machines.

Project management.

12

CadCorner >>www.cadcorner.be Contact: Steffi Frenier - Marketing & Communication - steffi.frenier@cadcorner.be ‘t Lindeke 1A, 8880 Ledegem T: +32 56 35 66 74

CAD, CAE, CAM, PDM, PLM, IoT De expertise en de software, van idee tot afgewerkt product.

Het is onze ambitie om het proces van uw productontwikkeling snel en efficiĂŤnt te laten verlopen en uitdagingen m.b.t. design, engineering en productie aan te pakken.

Advies | Software | Training| Software : PTC Creo, PTC Windchill, CGTech VERICUT, ANSYS, PTC ThingWorx, Vuforia, Luxion KeyShot Advies & Training; Concept design, detailed design, simulation, fluid dynamics, machine simulation, manufacturing, additive manufacturing, technical illustrations, rendering, augmented reality, product lifecycle management, industrial IoT.

13

Cadmes Belgium >>www.cadmes.com Contact: Olivier Clevers - Business Unit Manager Belgium - olivier@cadmes.com Derbystraat 23 bus C, 9051 Sint-Denijs-Westrem (Gent) T: +32 476 41 91 55

CADMES TAKES YOU FURTHER You want to offer more to existing customers and secure new ones. That is why you opt for proven technologies and creative solutions: Cadmes. At home with CAD, CAM, CAE, PDM to PCF. Cadmes offers you the tools, practical support and specific training. Cadmes has the people to coordinate the business processes. Your company then stays brisk and surprising and one step ahead of everyone. Cadmes is the trusted reseller of SOLIDWORKS. SOLIDWORKS 3D CAD, SOLIDWORKS Simulation, SOLIDWORKS Enterprise PDM, SOLIDWORKS Electrical and SOLIDWORKS Composer. It also sells Tacton (Tacton) and EXALEAD (Dassault Systèmes). We also have a strong presence in the CAM world with Cimatron and Mastercam. Our establishments are located in the Netherlands, Belgium, Germany and Luxembourg.

THE IDEAL TOOLS Faster, less expensive and more sustainable designs. More easily from design to prototype to production. SOLIDWORKS 3D CAD is a complete end-to-end 3D solution. A striking user-friendly interface. The result is time-savings and higher productivity. And a shorter time to market for a lower costs. This makes SOLIDWORKS 3D CAD the best choice for mechanical engineers, designers and innovators. Faster, less expensive and more sustainable designs. More easily from design to prototype to production. SOLIDWORKS 3D CAD is a complete end-to-end 3D solution. A striking user-friendly interface. The result is time-savings and higher productivity. And a shorter time to market for a lower costs. This makes SOLIDWORKS 3D CAD the best choice for mechanical engineers, designers and innovators. Contact us to have more information about our products!

14

Cloos Benelux >>www.cloos.be Contact: Patrick Hendrickx - Managing Director - patrick.hendrickx@cloos.be Grijpenlaan 24, 3300 Tienen T: +32 16 39 55 00

CLOOS Welding technology: Robot and welding technology from a single source.

Since 1919, Carl Cloos Schweisstechnik GmbH is one of the leading companies in welding technology. About 750 employees all over the world –­500 in the parent company in Haiger – realise production solutions in welding and robot technology for industries such as construction machinery, railway technology, energy, agriculture, and the automotive industry. The CLOOS welding power sources of the QINEO series are available for a multitude of welding processes.

With the QIROX robots, positioners and special purpose machines CLOOS develops and manufactures automated welding systems meeting the specific requirements of the customers.

QINEO, are the high-quality welding power sources by CLOOS which have been developed specifically for Commercial and industrial welding purposes. They meet every demand of manual and automated welding. Moreover, the modular QINEO system allows individual solutions which can be adapted to your specific production requirements and objectives. From capacity class to special equipment, each QINEO is customised and supplemented by a comprehensive accessories program and matching services. The system solution for automated welding and cutting: QIROX comprises all solutions for automated welding and cutting. Due to its modular design, the QIROX system allows scalable solutions which can perfectly match your production requirements. The QIROX system includes the robot technology, positioners, safety technology, software, sensors and the interface to the process technology.

15

De Fruytier >>www.defruytier.be Contact: Griet Missinne - Managing Director - info@defruytier.be Deken de Bostraat 33, 8791 Beveren Leie (Waregem) T: +32 56 71 22 71

We are a family business and for more than 40 years we supply cutting tools of all kinds. We optimize the industrial process for our customers by supplying high quality tools leading to higher productivity, improved tool life and decreased costs. Our technically trained staff is at your service.

We supply standard cutting tools but also specials. A brief overview of our wide product range: drills, taps and dies, milling tools, inserts, clamping tools, collets, precision measuring instruments, reamers, hobs, knurling tools, calipers etc...

16

De Ridder TDR B.V.B.A. >>www.ridder.net Contact: Johan Tanghe - Sales Manager & Coordinator - tanghe@ridder.net tdr@ridder.net Boomsesteenweg 690, 2610 Wilrijk T: +32 473 47 27 48

Import and sales of machinetools for metal cutting industry.

De Ridder in the BeNeLux With two trading companies, De RidderTHO (the Netherlands) and De RidderTDR (Belgium and Luxemburg), De Ridder covers the Benelux, where you as a customer benefits from extensive know-how and business knowledge. All this supported by one, centrally located in Best, service organization De RidderSRM. The current delivery program includes a very wide range of conventional, teach-in and CNCcontrolled machines for the following operations: •Turning • Milling • Grinding • EDM

Both for the manufacture of small and medium precision mechanical products, instruments, precision tools and for highly productive mass production, you will not only find the right machine, but of course also the corresponding technical accessories, handling systems, abrasives, consumables and occasion machines. Everything focused on so that you can use your production resources even more efficiently. Especially for the manufacture of small and medium precision mechanical products, instruments, precision tools etc. In addition, the sales program includes technical accessories, abrasives and occasion machines. These products offer you excellent opportunities to use your production resources even more efficiently. We are also specialized in machines and teaching materials for education.

High precision and middle range machines .

17

De Tollenaere >>www.detollenaere.be Contact: Marc De Tollenaere - CEO - marc@detollenaere.be Ringlaan 9, 9900 Eeklo T: +32 495 18 34 15

De Tollenaere is a family company who’s concentrating on selling innovating machines for the metal and aluminium construction companies. De Tollenaere has a dynamic team of 25 persons. Our priority is to deliver the right machine to improve the production and rentability of our customers.

Machines for the metal and aluminium construction companies, especially: - Sheet metalworking - Waterjet cutting - Plasma cutting - Automatic sawing solutions

18

DMG MORI BeLux >>www.dmgmori.com Contact: Patrick Bastiaens - Director - patrick.bastiaens@dmgmori.com Hermesstraat 4B, 1930 Zaventem T: + 32 2 712 10 90

Sales and service for the DMG MORI, Lasertec, Ultrasonic and Tayo Koki products

CNC lathes from Gildemeister, Grazziano, Mori CNC milling machines (universal, 5-axis, vertical and horizontal) from Deckel Maho and Mori Ultrasonic milling machines from Sauer Laser cutting machines from Lasertec Grinding machines from Tayo Koki 3D-additive machines Pre-setters from Microset Automation from DMG MORI

19

ESAB >>http://www.esab.be Contact: Dirk van Sonderen - Product Manager Standaard equipment Benelux dirk.vansonderen@esab.nl Liersesteenweg 173H, 2220 Heist-op-den-Berg T: +31 (0)6 11 498 974

ESAB is a world leader in the production of welding and cutting equipment and consumables.

Our innovative, world-renowned equipment and solutions are developed with input from our customers and built with the expertise and heritage of a global manufacturing leader.

Manual Arc Welding & Cutting Equipment Welding Consumables Automation & Robotics Welding Equipment Automated Cutting Systems PPE & Welding Accessories

20

FANUC Benelux >>www.fanuc.eu Contact: Paul Ribus - Managing Director - info@fanuc.be Generaal De Wittelaan 15, 2800 Mechelen T: +32 15 78 80 00

The FANUC Corporation is one of the worldwide leaders in factory automation for CNC control systems, laser, robots including cobots and production machinery (Compact CNC Machining Centres - ROBODRILL, CNC Wire-Cut EDM - ROBOCUT, Electric CNC Injection Moulding Machines ROBOSHOT and Ultra precision machines - ROBONANO). Since 1956, FANUC is the pioneer in the development of numerically controlled machines in the automation industry.

With more than 263 FANUC subsidiaries worldwide and more than 7,000 employees, FANUC offers a dense network in sales, technical support, research & development, logistics and customer service. FANUC has established training centers all over the world offering dedicated and customised training courses to all its customers.

With three core product groups, FANUC is the only company in its sector to develop and manufacture all its major components in-house. Every detail, both hardware and software, undergoes stringent quality control checks as part of an optimised chain. Fewer parts and lean technology make FANUC solutions reliable, predictable and easy to repair. They are made to run and provide you with the highest uptime on the market.

Specifically for the metal industry FANUC offers efficient automation in applications such as: • Handling operations at machine tools • Advanced Precision Machining • 5 axis milling • Fastening Drilling • Sealing Dispensing Surface Treatment • Laser • And much more

21

FormID >>www.formid.eu Contact: Arnoud D’Hondt - Director - arnoud.dhondt@formid.eu Frankrijkstraat 5, 9140 Temse T: +32 3 877 00 68

FormiD is focussing on Industrial applications in the field of Additive Manufacturing.

Our consultative approach will help companies determine the technologie(s) direction to go with 3D printing. Being it the creation of prototypes in a direct way through AM, or in an indirect way through the creation of Hybrid Moulds, we are there to help you.

If you are planning on implementing a truly digital AM Production workflow we will be able to assist you as well with the best solutions available on the market today.

Among the technologies we offer are: Powder Printing Technologies (Multi Jet Fusion) Resin Based Solutions (Stereo Lithographic) Industrial Filaments Technlogy Desktop CNC Solutions

22

Gelderblom CNC Machines >>www.gelderblom.be Contact: Wim Bogaerts - Manager Belgium & Luxembourg - w.bogaerts@gelderblom.be Franklin Rooseveltplaats 12 bus 21, 2060 Antwerpen T: + 32 495 20 79 82

Gelderblom CNC Machines BV offers a complete line of quality Japanese CNC machines for the metalworking industry. As a ‘Single Source Supplier’, we guarantee reliability and high precision.

OKUMA BeNeLux UNION CHEMNITZ BeNeLux

23

Gima-Machines >>www.gima-machines.be Contact: Gilbert Janssens - Director - info@gima-machines.be Industrieweg 13a, 2630 Aartselaar T: +32 3 877 01 22

Maintenance, repair and retrofit of CNC metal working machines.

Installation, repair, retrofit and training on below indicated machines.

24

Gravograph - Technifor Benelux nv/sa >>www.gravograph.com - www.technifor.com Contact: Helen De Leeuw - Marketing Benelux - helen.deleeuw@gravograph.be Rijksweg 3B, 2870 Puurs - Sint-Amands T: +32 3 880 62 04

For more than 75 years, Gravograph and Technifor have been the worldwide reference in the engraving and marking industry.

Technifor has become an important player in marking, identification and laser processing. We are the world’s largest manufacturer of permanent marking machines for automatic traceability and identification of all metals or plastics and organic parts. The brand offers a comprehensive range of marking solutions using laser, dot pin or scribing technologies.

Gravograph is the global reference in the industry of mechanical and laser engraving. We develop mechanical and laser engraving machines for all types of needs, and a wide range of special accessories and software. The brand also has a catalogue consisting of thousands of materials and objects to engrave or personalize, for indoor or outdoor use.

Gravograph and Technifor continuously develop unique solutions adapted to the needs of each customer. Engraving and marking are omnipresent in our daily lives.

ENGRAVING, CUTTING, CODING, MARKING, TRACING AND IDENTIFYING - Laser solutions (with Green - Hybrid - CO2 - Fiber laser technology) - Engraving and micromachining solutions (with milling, from small to super-large range) - Dot pin and scribing marking solutions (suitable for integration, portable or benchtop version) - Vision systems - Software Solutions - Consumables (engraving materials, peripherals, etc.)

- Tailor-made total solutions

Of course we also provide installation, training and technical support. You will find us in almost every sector, ranging from retail, municipalities and other public institutions, metal industry, shipbuilding, automotive, electronics, machine and plant construction, aeronautics, etc.

25

Gühring >>www.guehring.be Contact: Dirk Henderickx - Managing Director - dirk.henderickx@guehring.be Metropoolstraat 1, 2900 Schoten T: + 32 476 40 18 46

From drill pioneer to complete supplier Gühring is one of the world-wide leading manufacturers of rotary precision tools for metal machining. With more than 8000 employees world-wide, 3500 in Germany, in excess of 70 production locations in 48 countries the company develops, manufactures and distributes innovative cutting tools. Gühring is present on all important markets: customers in the automotive industry, the aerospace industry or in general engineering count on trendsetting tools manufactured to uniform quality standards of the highest level.

• Gühring drills, end mills, taps and reamers.

• NEW Gühring grooving and boring tools for turning operations.

• Hollfelder-Gühring fine bore and milling tools.

• Standard programs and special tools.

• Own local Gühring regrinding and coating centres (Gühring Eindhoven for the Benelux market).

• Own carbide production and metal cutting knowhow.

• OEM-retooling and 4.1 digital services.

• Vending machines and tool management services.

Gühring Belgium is a subsidiary of Gühring KG. They are located close to their customers and providing daily support. Gühring Belgium is your link to our production facilities and product management departments.

26

Haas Automation Europe >>www.haascnc.com Contact: Bert Maes - Marketing Manager - bmaes@HaasCNC.com Mercuriusstraat 28, 1930 Zaventem T: +32 2 715 13 37

Haas Automation is the largest machine tool builder in the western world, manufacturing a complete line of CNC vertical machining centers, horizontal machining centers, CNC lathes and rotary products. Haas Automation’s mission is to make essential CNC machining technology more reliable, more affordable, easier to operate, and easier to buy, so that metal working companies can increase their productivity and ultimately drive global economic growth and prosperity.

• Located in Oxnard, California, USA • A network of 170+ distributors in 80 countries • 170 local offices, showrooms and spare parts centers • 16 000 Haas machines built and sold each year – 80 per day • Highly reliable CNC machine tools at affordable prices with the fastest service • Published prices online to bring the industry honesty and transparency • Lower overall costs, higher profits for Haas customers

57 VMCs – Vertical Machining Centers 35 Rotaries & Indexers 21 Lathes – Turning centers 5 UMCs – 5-axis Universal Machining Centers 5 HMCs – Horizontal Machining Centers 1 factory: Haas Automation Inc., USA 2 subsidiary headquarters: Zaventem (Belgium) & Shanghai 170 regional parts depots around the world 170 Haas Factory Outlets in 80 countries 1 Haas Factory Outlet in Grimbergen, Belgium 1000 Haas service vehicles 1500 certified Haas service technicians

27

Hammer - IMS >>www.hammer-ims.com Contact: Noël Deferm - Managing Director - info@hammer-ims.com Kempische Steenweg 293 b36, 3500 Hasselt T: +32 11 36 55 01

Hammer-IMS is a high-tech company in the field of industrial sensing. It is a spin-off company of research laboratory ESAT - MICAS of KU Leuven University. Hammer-IMS supplies contactless measurement systems for measuring thickness, weight and anomalies of flat structures in production lines, based on the disruptive technology of Hammer-IMS’s M-Rays. This technology combines millimeter waves (=high-frequency electromagnetic waves) with innovative algorithms to a powerful alternative for today’s nuclear and radioactive measuring equipment. The HammerIMS systems have been performing trial runs at international paper producers and manufacturers of plastic sheets and films, and are now further engineered to handle composites, textile coating, non-wovens, mineral wool and other materials.

Hammer-IMS develops and commercializes measurement systems to improve product quality and production efficiency.

28

HEIDENHAIN >>www.heidenhain.be Contact: Sven Peetroons - Managing Director - sales@heidenhain.be Pamelse Klei 47, 1760 Roosdaal T: +32 54 34 31 58

HEIDENHAIN is represented all over the world today, mostly by wholly owned subsidiaries.

Sales engineers and service technicians support the user on-site with technical information and servicing.

The high quality of HEIDENHAIN products depends on special production facilities and measuring equipment. Masters and submasters for scale manufacturing are produced in clean-room building, with special measures for temperature stabilization and vibration insulation, built especially for this purpose. The copying machines and the machines required for the manufacture and measurement of linear and circular graduations are also developed and built by HEIDENHAIN.

Products from HEIDENHAIN ensure that machines and plants work productively and efficiently.

Since 1948, when the company began anew in Traunreut, HEIDENHAIN has shipped over 5 million linear encoders, over twelve million rotary and angular encoders, 470.000 digital readouts and nearly 240.000 TNC controls. Now and in the future, this expertise provides the assurance that HEIDENHAIN was the right choice.

DR. JOHANNES HEIDENHAIN Gmbh develops and manufactures linear and angle encoders, rotary encoders, digital readouts and numerical controls for demanding positioning tasks. HEIDENHAIN products are used primarily in high-precision machine tools as well as in plants for the production and processing of electronic components.

With our extensive experience and know-how in the development and manufacture of measuring devices and numerical controls, we create the groundwork for the automation of tomorrow’s plants and production machines.

29

I.Revitalise >>www.irevitalise.eu Contact: Stefan Verreyken - General Manager - stefan.verreyken@irevitalise.eu Selsaetenstraat 18, 2160 Wommelgem T: +32 472 09 20 12

I.Revitalise is the first B2B capacity sharing platform focused on high-tech and high-value machines, equipment, facilities and services in the industry. It is focused on three markets: 1. Manufacturing, 2. Maintenance, Repair and Overhaul and 3. Research and Development.

We provide easy access to high-tech for Renters and an extra revenue stream for Owners.

The main service we provide is matchmaking and unburdening for punctual / urgent high-tech needs or as an alternative for an investment. We allow the Renter to be matched with the Owner, and assure professional and reliable transactions.

Second we allow groups of companies or large companies / institutions with multiple sites or multiple departments to develop a private sharing platform.

And third we can also find a new Owner for machines / equipment that is no longer in use.

30

Lastek Belgium >>www.lastek.be Contact: Peter Boodts - Marketing manager - peter.boodts@lastek.be Toekomstlaan 50, 2200 Herentals T: +32 14 22 57 67

Lastek is manufacturer of high end welding machines and consumbles for special applications.

Our Belgian headquarters delivers fast and accurate service, at our service centers or on-site at the customer. Our main focus is a strong reliability of our products and service.

- MMA welding machines - TIG welding machines - MIG/MAG welding machines - MMA welding electrodes - TIG rods - welding wires - welding accessories - fume extractions - welding training - cutting machines

31

LVD Company nv >>http://www.lvdgroup.com Contact: Philippe Delberghe - Sales and Marketing Director - marketing@lvd.be Nijverheidslaan 2, 8560 Gullegem T: +32 56 43 05 11

LVD develops and manufactures a comprehensive range of sheet metal/plate working machines and software solutions, including laser cutting systems, punch presses, press brakes, guillotine shears and automation systems, integrated to and supported by its CADMAN® software suite.

LVD Industry 4.0-ready products and technology make smart manufacturing possible.

Products: • Laser cutting machines: an impressive portfolio of flatbed fiber lasers is completed with tube laser equipment.

• Punch presses: LVD is one of the few manufacturers to offer both turret and single-head technology.

• Press brakes: from the award-winning Synchro-Form press brake to the market-leading ToolCell, LVD is recognised for its leadership in bending.

• Software: LVD’s CADMAN software ensures the full integration of laser cutting, punching, bending and sorting operations. Individual modules can be combined to improve process flow from order to finished part.

Through strong leadership, LVD continues to thrive and today is active in 45 countries worldwide with production sites in Belgium, USA, Slovakia and China.

32

MEMA Machinery & Tools >>www.mema.be Contact: Johan MEERT - CEO - johan.meert@mema.be Nijverheidsstraat 12, 1840 Londerzeel T: +32 52 31 70 80

A family company founded in 1974 and located in the centre of Belgium.

3 sales people, 12 in total.

We carry a full range of machines, accessories and tooling.

Machines go from conventional to NC. Service and training.

33

Metallic Bridges of Belgium >>www.metalbb.be Contact: Olivier Tromme - Communication - o.tromme@metalbb.be Grand Rue, 76, 4560 Ocquier (Clavier) T: +32 3 28 634 41 08

MATIERE SAS acquired Ateliers Roger Poncin & Cie SA in Ocquier in Belgium. of art and special metal structures since 3 generations (1943). The new company, Metallic Bridges of Belgium s.a., MBB for close friends, is a new strategic subsidiary of MATIERE SAS for the coming years. With its highly qualified and experienced employees as well as high-level facilities and equipment, MBB is ideally located in the heart of Europe, a few kilometers from the port of Antwerp. A new UnibridgeÂŽ line has been installed to participate in the production of major export projects. Deploying its own sales force via its subsidiary Poncinlux, MBB is present on the Belgian, Dutch, Luxembourg, French, German, Austrian and Swiss markets.

With its highly qualified and experienced employees who rely on an efficient quality management system with high level facilities and equipment, MBB is certified EN 1090 - EXC4 execution class for the supply, manufacture and sale delivery of all types of metal constructions (Structures Art, Special Works, Lock Equipment, Industrial Buildings).

34

Metanox >>www.metanox.be Contact: Vanlerberghe Christian - Manager - info@metanox.be Driemasten 85, 8560 Gullegem (Wevelgem) T: +32 56 41 99 94

Plate Working Machines

Pressbrakes Shears Punching machines Horizontal bending machines Corner notchers Laser cutting machines Rolling machines Profile rolling machines Machines for tube bending and deforming Plasma cutting machines Sawing machines Folding machines Ironworkers Grinding machines Bending tools

35

Mitutoyo Belgium >>http://www.mitutoyo.be Contact: Henk Slotboom - Managing Director Mitutoyo Benelux h.slotboom@mitutoyobenelux.com Hogenakkerhoekstraat 8, 9150 Kruibeke T: +32 3 254 04 44

Mitutoyo is the’ world’s leading manufacturer of precision measuring equipment, offering a huge range of products from sales offices in more than 40 countries. Today, many internationally renowned companies depend on Mitutoyo products and services to ensure consistent and high quality in their manufacturing operations, as do many thousands of other firms, both large and small. One thing we know for sure about our customers, both actual and potential, is that they are all looking for the best value available in measurement products, with first-class backup support services. In Belgium, in addition to providing top-quality products for manufacturing industry, Mitutoyo offers machine-specific training for customers as well as general metrology training courses for companies wishing to upgrade staff skill levels. Support services include technical advice on specific applications of the company’s products, Belac- and RVA- certified calibration, sub contract measurement, and bespoke system design for particularly challenging measurement and component handling applications. After all, when the success of your company depends in large part on reliable, traceable measurement to national standards, with the service and supply backup of strong group resources, there really is no other choice, MITUTOYO IS YOUR LOCAL PARTNER.

- Coordinate Measuring Machines - Vision Measuring Systems - Form Measurement - Optical Measuring - Sensor Systems - Test Equipment and Seismometers - Digital Scale and DRO Systems - Small Tools & Data Management

36

Nedschroef Herentals >>www.nedschroef.be Contact: Marc Van Thiel - Sales Manager - marc.van.thiel@nedschroef.be Brigandsstraat 10, 2200 Herentals T: +32 14 25 71 00

NEDSCHROEF Machinery is a leading supplier of multistation, cold and warm metal forming machines. NEDSCHROEF Machinery was founded in 1961 and is part of the NEDSCHROEF Holding. The head office of NEDSCHROEF Machinery is located in Herentals, Belgium. Here, our experienced, skilled and dedicated employees are developing and producing machines and tools, and providing technical support and service of the highest quality. Each of them driven by passion.

Service and investment support are in the capable hands of our equally driven sales team, which operates on a global scale.

Nedschroef Machinery is a leading manufacturer of cold and warm metal forming machines.

Our high-performance machines allow mass production of fasteners and parts.

Our goal is to provide the highest quality equipment and solutions to improve our customer’s performance.

37

Oerlikon Balzers Coating Benelux >>www.oerlikon.com/balzers/be Contact: Volders Georges - Director Sales & Operations - info.balzers.be@oerlikon.com Nijverheidslaan 5470, 3800 Sint-Truiden T: +32 11 69 30 40

Oerlikon Balzers is the world’s leading supplier of thin film coatings that significantly improve the performance of tools and precision components. The coatings, marketed under the BALINIT® and BALIQ brand name, are extremely thin, harder than steel and lead to a decisive reduction in friction and wear.

Oerlikon Balzers develops coatings and coating processes, markets systems and production equipment and is the only company that provides a contract coating service in a global network that currently includes more than 90 production centres in Europe, America and Asia.

BALINIT® coatings are just a few thousandths of a millimetre thick but harder than steel; these low-friction coatings are extremely wear-resistant and chemically inert. The optimum coating is determined on the basis of both conditions of use and economic considerations. The material and properties of BALINIT® and BALIQ coatings can be selected to match the customer’s specific requirements. The typical coating thicknesses that can be reproduced in mass-production lie between 0.5 µm and 4 µm. Sharp edges, textured or mirror surface finishes and close production tolerances remain unaltered. Therefore no finishing work is required and the coating can be carried out as the final production step.

38

Orbid >>http://www.orbid.be Contact: Pieter Staelens - Verantwoordelijke Marketing - info@orbid.be Guldensporenpark 29 - Blok C, 9820 Merelbeke T: + 32 9 272 99 11

Orbid, a Belgian-based company, supports companies & organizations with their non-core activities. We help them to think about their growth & continuity and assist them in implementing these ideas effectively..

Orbid is al global Business Solution Partner. We are active in 4 domains: Strategy & Operations, HR, Applications and ICT.

39

OSG DAVID Grinding Services >>www.precdavid.be Contact: David Carl - manager - info@precdavid.be Heirweg 82-84, 8520 Kuurne T: +32 56 37 26 46

OSG DAVID Grinding Services, then a traditional and artisan grinding, is currently one of the most advanced CNC tool grinding shop!

OSG DAVID Grinding Services offers you the capability of producing specialized custom tools for niche applications and jobs. Be it special reamers or complex end mills and step drills we can manufacture to you specifications, quickly and with the highest OSG quality standards.

Production and regrinding: - Mills - Drills - Taps - Saw blades step drills - Straight / circular knives - Bending tools -‌

40

Prima Power >>www.primapower.com Contact: Lieven Louagie - Senior Sales Manager Benelux - lieven.louagie@primapower.com Leenstraat 5, 9810 Nazareth T: +32 9 382 90 30

Prima Power is a world leading, stock listed, European manufacturer of sheet metal working machines.

The Benelux market is served from Nazareth, near Ghent where we have a sales and after sales division + the biggest logistic center of the group where we keep and send our spare parts worldwide. In Benelux 25 people are ready to serve you as our customer.

Our portfolio exists of: - punching machines - combined punch right angle shear machines - Shear Genius - Laser combi machines - Pressbrakes - Panel Benders - 2D laser cutting machines - 3D laser cutting machines - all automation for above machines, part pickers, automatic loading and unloading - fully automated storages, combo tower or night train

41

Produsoft >>www.produsoft.com Contact: Ronny Jonckheere - Managing Director - info@produsoft.com Koningin Astridlaan 46, 9990 Maldegem T: +32 50 72 95 95

Produsoft is the CAD/CAM specialist for milling, turning, turn-milling, wire EDM, 2D and 3D sheet metal, engineering and DNC. High amounts of simple products or unique pieces of the most complex products, Produsoft has the production software that meets your requirements.

Produsoft is the Benelux supplier of SpaceClaim, Edgecam, WorkNC, Peps, Radan, VISI, Mecanic, CIMCO and NCspeed.

Next to these international standard products, Produsoft has its own development department that allows them to deliver a fully customized solution.

42

Renishaw Benelux BV >>www.renishaw.nl Contact: Petra Koolaard - Marketing Coordinator - benelux@renishaw.com Nikkelstraat 3, 4823 AE BREDA T: +31 76 54 311 00

Renishaw is a global company with core skills in measurement, motion control, spectroscopy and precision machining. We develop innovative products that significantly advance our customers’ operational performance – from improving manufacturing efficiencies and raising product quality, to maximising research capabilities and improving the efficacy of medical procedures.

Our products are used for applications as diverse as machine tool automation, co-ordinate measurement, additive manufacturing, gauging, Raman spectroscopy, machine calibration, position feedback, large scale surveying, stereotactic neurosurgery, and medical diagnostics.

In all of these areas we aim to be a long-term partner, offering superior products that meet our customers’ needs both today and into the future, backed up by responsive, expert technical and commercial support.

43

Revimaxx >>www.revimaxx.com Contact: Johan Van Meenen - CEO - info@revimaxx.com Poldergotestraat 13, 9240 Zele T: +32 52 31 71 50

REVIMAXX is a Belgian company specialized in the “Design, Engineering & Production” of large, heavy and complex “customer-specific” mechanical parts, systems and machines, whereby high precision, a detailed quality-control and a flexible delivery are requested.

Our mission is to “co-create” the complete part/system/machine in consultation with the customer, based upon his specifications.

REVIMAXX takes full responsibility to deliver an end-to-end “turn-key” solution, including the complete welding of the structure, the machining of all parts, the full assembly, also installing the hydraulic, pneumatic and electrical equipment and doing the “in-house” testing.

Design, Machine Building, Machining, Assembly & Overhaul, in the following industries within EMEA-region: - Aerospace, - Aviation, - Marine, - Oil & Gas, - Petrochemie, - Recycling, Steel.

44

RoboJob >>www.robojob.eu Contact: Steven Craenen - Marketing Manager - steven.craenen@robojob.eu Industriepark 12, zone B, 2220 Heist-op-den-Berg T: +32 15 14 06 10

Since its start in 2007, RoboJob has grown into the undisputed market leader in CNC automation.

RoboJob offers you the most comprehensive and user-friendly portfolio of standard automation products and modular extensions. These allow you to build your custom-made automation. With our solutions, you can get more out of your CNC machine. More spindle hours, more efficiency, all adding up to more profitability and a stronger competitive position.

Get to know us. You’ll see that you’ve found a partner who not only knows the manufacturing industry in all its facets, but who also thinks with you. Together, we’ll make your business more profitable, we’ll increase your flexibility and we’ll improve your employees’ job satisfaction.

45

Rösler Benelux >>www.rosler.com Contact: Vincent Raman - Product Specialist - rosler-be@rosler.com Avenue de Ramelot 6, 1480 Tubize T: +32 2 361 02 00

When it comes to dealing with surface finishing and surface preparation problems, Rösler offers the total process solution! Through extensive processing trials, we always find the right finishing solution for our customer’s needs.This includes not only the development of a specific finishing process, but also the selection of the right equipment and consumables. We deliver the total solution to satisfy your surface finishing requirements.

Besides the German plants in Untermerzbach and Bad Staffelstein, the Rösler Group has branches in Great Britain, France, Italy, The Netherlands, Belgium, Austria, Switzerland, Spain, Romania, Russia, China and India.

As an all-round supplier, Rösler GmbH is an international market leader in the production of shot blasting machines, painting systems and preservation lines as well as process technology for the rational surface finishing (deburring, descaling, sand removal, polishing, grinding…) of metals and other components.

46

Sandvik Coromant >>www.sandvik.coromant.com/be Contact: Willem van Baarle - Customer service - willem.vanbaarle@sandvik.com ‘s Gravelandseweg 401, 3125 BJ Schiedam, The Netherlands T: +32 2 808 67 36

Sandvik Coromant is the world’s leading supplier of tools, tooling solutions and know-how to the metalworking industry. With extensive investments in research and development we create unique innovations and set new productivity standards together with our customers. These include the world’s major automotive, aerospace and energy industries. Sandvik Coromant has 8000 employees and is represented in 130 countries. We are a part of the business area Sandvik Machining Solutions within the global industrial group Sandvik.

Turning tools, Milling tools, Drilling tools, Boring tools, Threading tools, Tapping tools and Tooling Systems.

DORMER PRAMET >>www.dormerpramet.be Contact: Hans van Steenis - General Manager Benelux - hans.vansteenis@dormerpramet.com ‘s Gravelandseweg 401, 3125 BJ Schiedam, The Netherlands T: +31 10 208 0240

Dormer Pramet is the result of a merger in 2014 between rotary tooling manufacturer Dormer and indexable specialist Pramet.

The strengths of each company were combined to create a single platform, providing customers with access to a wide range of high quality, fit-for-purpose products including hole-making, milling, turning and threading tools.

With 20 offices worldwide serving over 100 countries, production facilities in Europe and South America and a highly developed logistics network, we offer truly global coverage.

We passionately believe in building long-term partnerships, sharing our expertise and being honest and available at all times. These qualities are deeply rooted in the fabric of our company and every Dormer Pramet employee is charged with upholding and promoting them with pride.

This is how we continue to build trust. Today, tomorrow, forever. Simply Reliable.

47

Savaco >>www.savaco.com Contact: Stijn Vandebuerie - Marketing Manager - info@savaco.com Beneluxpark 19, 8500 Kortrijk T: +32 56 26 03 04

Savaco is a professional ICT service provider based in Kortrijk, specialized in industrial best-in-class solutions that create tangible impact and help companies to achieve their business goals. With nearly 30 years of experience, Savaco is a trusted IT advisor to over 250 active customers in various sectors.

Savaco’s areas of expertise include hybrid Cloud platforms, cybersecurity, CAD & PLM software, IoT technology, Augmented Reality and Data Analytics.

As trusted advisor and IT partner, we guide organizations on their digital transformation journey.

Our goal is to change business outcomes through digital technology. We focus on 4 business outcomes: 1. Optimize operations 2. Empower employees 3. Engage customers 4. Transform products

48

Seco Tools Benelux >>www.secotools.com/be Contact: Line Ranson - Marketing & Sales Support - line.ranson@secotools.com ChaussÊe de Nivelles 28, 1420 Braine-l’Alleud T: +32 2 389 09 60

Seco Tools actively contributes to improving your productivity and competitiveness in metal cutting machining.

Customer closeness and a solution-oriented approach are our strategic cornerstones, together with verifiable and documented improvements in your total cost of production.

We value long term relationships as it is possible to gain a better understanding of your challenges and allows us to actively contribute to your development.

A comprehensive range of cutting tools is another central component of our strategy and the quality and innovation built into our tools is the key to your profitable production. In order to offer the best total solutions we also provide technical support, demonstrations, technical advice, new ideas and practicable experience.

Seco Tools has an established reputation as a leading manufacturer and supplier of carbide cutting tools and associated equipment: Cutters and inserts for milling.

Solid end mills.

Toolholders and inserts for turning.

Tools for drilling, reaming and boring.

PCBN and PCD tools.

Monobloc and modular toolholders.

49

Siemens >>www.siemens.be Contact: Thierry Van Eeckhout - Vice President Sales industrie.be@siemens.com Guido Gezellestraat 123, 1654 Huizingen (Beersel) T: + 32 2 536 21 11

Siemens is a global technology powerhouse that has stood for engineering excellence, innovation, quality, reliability and internationality for 170 years.

The company is active around the globe, focusing on the areas of electrification, automation and digitalization. We combine solid market expertise with an innovative, comprehensive portfolio of products, systems, solutions and technology-based services to deliver value-add for both manufacturing and process industries.

We help companies in all industry sectors to increase productivity, shorten time-to-market, and improve the reliability, safety, and efficiency of products, processes and plants.

Our customers are benefiting from future-proof automation, drive technology, industrial software, and services based on best-in-class technology platforms.

50

Sinvacon >>www.sinvacon.be Contact: Pascal Verheyen - General Manager - pascalverheyen@sinvacon.be Provinciebaan 102, 9890 Gavere T: +32 478 54 69 68

Looking for expertise in the field of vacuum technology, plasma or vacuum deposition techniques such as PVD or CVD(?) Sinvacon is your partner from the design phase to the implementation of all your vacuum applications.

Sinvacon offers plasmatreatment for surface cleaning, activation, etching and/or coating. Having issues with poor adhesion(?) Contact us for a demonstration or sample treatment. We can offer a large variety of systems, from R&D labscale and low cost solutions, up to 12 m3 large systems for mass production

Sinvacon also offers solutions for sputter hardware (PVD coating), sputter targets and power supplies for PVD applications

Plasmabeam systems (atmospheric plasma systems) ZEPTO and ATTO (labscale low pressure R&D systems) PICO - NANO - TETRA (midscale R&D or production low pressure plasma systems) Custom made low pressure systems for various applications (medical, foil, wire) SCI sputter hardware for rotary cathodes (endblocks, cantilevered, targets, magnetics)

51

SKS Machines >>www.sks-machines.be Contact: Gerrit Verbeeck - Zaakvoerder - info@sks-machines.be Bedrijvenpark “De Veert“ 13-014, 2830 Willebroek T: +32 3 844 41 64

- Service company, not linked to brands - Retrofit of machine tools - Building of prototypes - Construction of cnc flat tables for processing non Ferro

- Repair of all machinery both mechanical and electrical - Addition of extra functions on machines is possible - Complete overhaul - Great specialisation in building of high-precision flatbed milling machines made of high-grade granite as a base, and crossbar, the rest in special cast steel, for processing thin sheet material, with high precision, 5µ as maximum deviation

52

Stäubli Benelux >>www.staubli.be Contact: Trui Verschelde - Marketing & Communication - +32 56 36 40 10 Meensesteenweg 407-409, 8501 Bissegem (Kortrijk) T: +32 56 36 41 01

Stäubli is a mechatronics solution provider with three dedicated divisions: Robotics, Connectors and Textile machinery. With a workforce of over 5000, the company generates a yearly turnover surpassing 1.25 billion Swiss francs. Originally founded in 1892 in Zürich, Stäubli today is an international Group with its head office in Pfäffikon, Switzerland.

Stäubli Robotics offers solutions for all industries. The comprehensive product range includes small 4-axis robots as well as medium to heavy-duty robots operating with payloads of up to 190 kg.

The robotics product line is completed by controllers, software and professional applications of unrivaled quality and performance.

Stäubli’s robotic solutions for machine tending are the product of substantial experience in machine tool loading and unloading. We have developed numerous solutions in conjunction with manufacturers and systems integrators on all types of machines including single-spindle, twinspindle and multi-spindle lathes, rotary transfer and linear transfer machines, machining centers, tapping centers, grinding machines, honing machines, boring machines, cutting machines and super finish machines among many others.

53

Tools & Dies >>www.toolsanddies.be Contact: Tim Thyssen - General Manager - tim.thyssen@toolsanddies.be Eikenlei 157, 2960 Sint-Job-in-’t-Goor (Brecht) T: +32 3 633 99 70

With over 40 years of experience, we are specialist in the tools and dies industry. For steel and non-ferrous we develop progressive dies as well as deep draw dies. We fabricate injection and thermoforming molds.

In our facility we have a experienced capacity where we can: - Design & Engineer - Development and test tools&dies - Provide maintenance - Provide production on our presses (stamping)

54

TRIDEUS >>www.trideus.be Contact: Marc Van den Bosch - Sales Manager - marc@trideus.be Truibroek 65, 3945 Ham T: +32 11 48 00 75

Trideus, founded in 2014 by Jesse Buteneers, offers today high-end 3D printers together with services.

The wide range of 3D printers combined with the appropriate materials (metal – powder – filaments) make it possible to offer a solution for the many challenges in the different industries.

Challenges such as: • saving costs and speeding up the process while prototyping • Personalization and customization • Saving weight and material •…

Besides single prints, several 3D-printers have the capacity to print small badges of prototypes or functional parts.

Trideus is your 3D printing expert. Not only are we selling 3D printers and materials, Trideus is your guide during the buyer journey and beyond. By offering advice, doing the installation and training, delivering service when needed or offering print service, Trideus is your 3D printing partner in the era of Industry 4.0.

55

Valk Welding >>www.valkwelding.com Contact: Peter Pittomvils - CCO Valk Welding Group - info@valkwelding.com August De Boeckstraat 1, bus 5, 9100 Sint-Niklaas T: +32 3 685 14 77

Valk Welding develops and delivers robotic welding systems which are intended for flexible production of small to medium-large series. On the back of the sale and installation of more than 3000 industrial robots and a monthly supply of more than 600 tons of solid welding wire, Valk Welding is truly one of the largest independent suppliers in this field in Europe. With our extensive knowledge and experience in the field of robotic welding technology, Valk Welding can provide total solutions that lead to strong productivity and profitabliltiy gains.

Valk Welding is one of the market leaders in the field of robot and welding techniques in Europe.

The projects realised vary from simple robot systems to complex installations with several robots, off-line programming and custom-made software, the necessary options and safety components.

Our partner for these projects is Panasonic. Not only for welding but also for (plasma) cutting we have several solutions.

For real time seam tracking we developed and supply our Arc-Eye laser seam tracking solutions worldwide.

56

van Waasdijk >>www.vanwaasdijk.com Contact: Michel Closet - CEO - machines.dpt@vanwaasdijk.com Waardbeekdreef 3, 1850 Grimbergen T: +32 2 427 21 51

Van Waasdijk is the partner to help you reduce operational costs and improve performance, not only with the right machine but also with a complete package of services and clear advice.

Milling / Turning / Straightening / Electro-erosion After-sales service / Automation Workshop equipment and tools

57

Walter Benelux >>www.walter-tools.com Contact: Pierre-Yves Gaude - Managing director - pierre-yves.gaude@walter-tools.com Romboutsstraat 3, 1932 Sint-Stevens-Woluwe (Zaventem) T: +32 2 725 85 00

The headquarters of Walter AG are in Tßbingen in the south of Germany. With 33 subsidiaries and a large number of distribution partners, the company’s international representation on all continents is guaranteed: a global service and local technical expertise are very important to us.

The five competence brands of Walter, Walter Titex, Walter Prototyp, Walter Valenite and Walter Multiply, are united under one company umbrella. With a product range of around 49,000 catalogue tools for milling, drilling, turning and threading, Walter is a complete service provider for the metalworking industry. Specialists working in the relevant competence brands jointly develop integrated processing solutions for machining. Here their comprehensive expertise in the automotive sector, the aerospace industry, energy, rail transport and general mechanical engineering stands them in good stead.

Turning your own ideas into reality requires the right tools. Tools for turning, milling, drilling and threading. But it also takes heart and soul. From the initial inspiration to the final application.

With the combined expertise of Walter, Walter Titex and Walter Prototyp, you acquire more than just tools.

We’re driven to find out what our customers want and committed to making it happen. We focus on the application at hand and what our customers want to achieve. We help in turning this idea into reality. For us, perfection is the most important thing. Perfection is the easiest way to achieve productivity and efficiency, and the only way to turn visions into reality.

58

Welding Company >>www.weldingcompany.be Contact: Patrik Huysmans - Manager - ph@weldingcompany.be Brandekensweg 6, 2627 Schelle T: +32 3 880 81 80

WELDING COMPANY uses a thought-through concept to make fast and efficient service possible.

How do we do that(?)

We take sole responsibility for installation, maintenance and repair of our machines and accessories, both hired and sold. Professionals, who have maintained a large fleet of hire machines continuously for 40 years, come to you on site to solve technical problems. They really know their machinery like no other. We have a team of representatives and engineers ready to give you technical advice. Our mission is to satisfy the client. Our strength is keeping our eye on the ball. In most cases when you need a hire machine or a replacement urgently, we will help you out on the same day. When a customer rents a device, he can also contact us for further equipment of his facility, such as lighting, distribution boxes, extension cords, generators and tools, to name but a few. If a customer buys or hires an appliance, they can order all the required supplies at the same time, e.g. electrodes, welding wire, powder for submerged welding, tungsten electrodes, gloves, underlay strips, welding goggles, welding helmets, and so much more. Welding Company supplies only top quality in all that the welder needs!

Miller Welding products is a leading manufacturer of arc welding equipment, continually introducing new products, technology, and innovations.

The name ZINSER stands for quality “made in Germany” since 1898. The brand is known worldwide for expertise in the area of welding and cutting technology. We are your specialist for high-end oxy-fuel technology, hot air welding devices for professional use and a wide range of cutting systems. As a leading manufacturer of guiding machines for cutting thicknesses from 0.8 to 600 mm, we offer superb flexibility and innovation. With an in-house team of engineers, we realise our customers’ individual needs and adaptations in CNC controls and cutting machine construction.

Firefly Orbital Welding Machine can be used where a high degree of weld repeatability is required and a flat or flexible track / band can be installed. Examples of welding applications can include: • oil, gas and water pipelines • wind and wave farm construction • large diameter vessel fabrication • chemical and petrochemical facility construction • steam pipes • tubular structures • pressure vessel construction • internal welds • shipyard construction work • power plant construction, nuclear and conventional • general fabrication

59

WSB Finishing Equipment >>www.wsb-wagner.eu Contact: Danny Vanlerberghe - Owner - danny.vanlerberghe@wsb-wagner.eu Veilinglaan 56-58, 1861 Wolvertem (Meise) T: +32 2 269 46 75

WSB is distributor of high tech systems and components for coating and decorating with paints for the Benelux territory. Our customers are manufacturers, contractors and consumers alike

Professional Finishing: paint spray equipment for the application of varnishes, emulsions and plaster in the contractor business.

Liquid Applications: equipment for the application of liquid media (paints, adhesives etc.) in industrial areas.

WAGNER WALTHER PILOT REINHARDT-TECHNIK SATA B-TEC HONEYWELL

ZiggZagg >>www.ziggzagg.be Contact: Jo De Groote - Sales Manager - jo@ziggzagg.be Venecolaan 10, 9880 Aalter T: +32 0487 90 77 03

Ziggzagg NV is an AM service provider with an impressive machine park based in Aalter, Belgium.

Clients can order trough an online platform in what material and in what lead-time they want their parts produced. With it’s 9 HP Multi Jet Fusion machines, they can go from order to printed part in short lead times.

With several years of experience within the AM scene, having well trained machine operators and product designers in-house, Ziggzagg is thé preferred partner for all prototyping but also mass-manufacturing projects with the use of 3D-printing. Having proven that short lead times of 2-3 days is possible, Ziggzagg offers that service together with the know-how to mass-produce consistently of orders of up to 380.000 parts, spread over several months. All within quality, all within desired specifications.

Aside from production, the Ziggzagg team offers a wide range of services to it’s customers. It’s possible to plan visits to its production site to discuss 3D-design, reverse engineering, 3D-scanning and CNC milling in foams.

Another popular service Ziggzagg offers is the end-product finishing on 3D-printed models. Clients can order sanded, polished and painted parts all within its online tool.

Aside from all these services, Ziggzagg keeps looking at what’s next within the business and actively searches for new opportunities or technologies developed within the branche.

At ZiggZagg you get complexity for free! Standard delivery times from three to five days.

61

Other

Electrical discharge machines

Sawing and cutting-off machines

Gear cutting and finishing machines

Grinding, honing, lapping and polishing machines

Milling machines

Drilling machines, boring machines, boring-milling machines

Turning machines, turning centres

Machining centres, flexible systems

Metal-Cutting machine tools

PRODUCTS 123 Automation Engineering & Development 4D Cam, BVBA

✓

ABB, NV Ad Ultima, NV Adopt id PLM, BVBA AMS Belgium, BVBA ATS Applied Tech Systems Buhlmann, NV

✓ ✓ ✓

✓

✓

✓

✓ ✓ ✓

✓

✓

✓

✓

CadCorner, BVBA Cadmes Belgium, NV Cards PLM Solutions, BVBA Cloos Benelux, NV De Fruytier, BVBA

✓

De Ridder TDR, BVBA

✓ ✓ ✓

De Tollenaere, NV

✓ ✓

DMG-Mori BeLux, BVBA/SPRL

✓ ✓ ✓

Dormer Pramet

✓

ESAB, NV-SA

✓

Fanuc Benelux, BVBA

✓ ✓

✓

✓

✓ ✓

✓

✓

Gelderblom CNC Machines, BV

✓ ✓ ✓

✓

✓

Gima-Machines, BVBA

✓ ✓ ✓

✓

✓

✓

Pre-setters for cutting tools|Ultrasonic milling machines Combined 5-axis milling and Laser

✓

✓

FormID, BVBA

Gravograph - Technifor NV/SA

✓ ✓

✓

✓

Gühring, NV Haas Automation Europe NV

✓ ✓ ✓

✓

Hammer IMS NV Heidenhain, NV i.Revitalise NV

✓ ✓

✓

✓

✓

✓ ✓ ✓

MEMA Machinery & Tools, NV

✓ ✓ ✓

✓

✓

✓

✓ ✓ ✓

Metallic Bridges of Belgium NV

✓ ✓

✓

✓

✓ ✓ ✓

Lastek Belgium, NV

✓

LVD Company, NV

62

Coding Marking machines for Identification and Traceability

✓ ✓ ✓ ✓ ✓

✓ ✓ ✓ ✓

✓ ✓

✓ ✓ ✓ ✓

✓

✓ ✓ ✓ ✓ ✓

✓ ✓

✓ ✓

✓

✓ ✓

✓ ✓ ✓ ✓

✓ Waterjet cutting systems Plasma cutting systems ✓ ✓ ✓

✓ ✓ ✓

✓

✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓

3D print machines Metal and Plastics

✓

✓

✓

✓

✓

✓ Punch Presses

✓

✓

✓

✓

✓

✓

✓ ✓ ✓

✓

✓ ✓ ✓

✓

✓

✓

✓

✓

Tool Management Systems

✓

✓

✓

✓

✓ ✓

✓ ✓ ✓

63

Other

Integration

Automation

Robotics

Robotics & automation

Surface treatment

Cutting tools

Other

Laser machines

Other presses

Shearing, punching, notching machines (incl. presses)

Bending, folding, straightening machines (incl. presses)

Forging machines & hammers (incl. presses)

Metal-Forming machine tools

Metanox, BVBA

Other

Electrical discharge machines

Sawing and cutting-off machines

Gear cutting and finishing machines

Grinding, honing, lapping and polishing machines

Milling machines

Drilling machines, boring machines, boring-milling machines

Turning machines, turning centres

Machining centres, flexible systems

Metal-Cutting machine tools

PRODUCTS

✓

Mitutoyo Belgium, NV/SA Oerlikon Balzers Coating Benelux, NV-SA ORBID, NV OSG David Grinding Services, BVBA

✓

Prima-Power Produsoft, BVBA Renishaw Benelux BV Revimaxx NV

✓

✓

✓

✓

✓

RoboJob, NV

Automation of the loading and unloading of CNC turning lathes and milling machines.

Rösler Benelux, B.V.

Sandvik Benelux, BV

Shotblasting machines, Industrial Washing Equipment, Process Water Recycling Systems

✓

✓

Savaco, NV Seco Tools Benelux, SA-NV Siemens, NV-SA Sinvacon, BVBA SKS Machines, BVBA

Plasma teratment machines ✓ ✓ ✓

✓

✓

✓

✓ ✓

✓ ✓ ✓

✓

✓

✓

✓

✓

✓

Stäubli Benelux, NV Tools & Dies Engineering, NV Trideus Valk Welding, NV van Waasdijk, NV

✓

Walter Benelux, NV Welding Company, NV WSB Finishing Equipment, BV ZiggZagg, NV

64

3D Printed parts

✓ Shearing, punching, notching machines (incl. presses)

✓

✓ ✓

✓ ✓ ✓ Laser combi’s

✓ Coatings systems

✓

✓

3D metal print machines

✓

✓

✓ ✓

✓ ✓ ✓ ✓

✓

Other

Integration

Automation

Robotics

Robotics & automation

Surface treatment

Cutting tools

Other

Laser machines

Other presses

Bending, folding, straightening machines (incl. presses)

Forging machines & hammers (incl. presses)

Metal-Forming machine tools

✓ ✓ ✓

✓

✓ ✓ ✓ ✓

Mass finishing & shotblasting Technology

✓

✓ ✓ ✓ ✓

✓ ✓ ✓

✓ ✓ ✓

3D print machines Metal and Plastics ✓

✓ ✓ ✓ ✓ Laser seam tracking

✓ ✓ ✓ ✓

✓ ✓ ✓ ✓

✓

✓

65

4D Cam, BVBA

Other

Welding Consumables & accessories

Welding Machines & installations

Welding

Measuring machines & tools

Numerical control systems & accessories

Other

PLM

ERP

CAD/CAM

Software

PRODUCTS

DNC MDC

✓ ✓

ABB, NV Ad Ultima, NV

✓ ✓ ✓ ✓

Adopt id PLM, BVBA

✓ ✓

AMS Belgium, BVBA

✓

ATS Applied Tech Systems

✓

✓

✓ ✓

Buhlmann, NV CadCorner, BVBA

✓ ✓

Cadmes Belgium, NV

Cards PLM Solutions, BVBA

✓

✓ ✓

✓ CAE & IOT ✓ SOLIDWORKS CAD, Electrical CAD, Simulation CAD, Composer, PDM, PLM, Mastercam, Tacton Configurator, Inspection, MBD, Exalead. ✓ Simulation

Cloos Benelux, NV

✓ ✓ ✓

De Fruytier, BVBA De Ridder TDR, BVBA

✓ ✓ ✓

✓

✓ ✓

De Tollenaere, NV DMG-Mori BeLux, BVBA/SPRL

✓ ✓ ✓ ✓

ESAB, NV-SA

✓ ✓

Fanuc Benelux, BVBA

✓

FormID, BVBA

✓

Gelderblom CNC Machines, BV

✓

✓

✓

✓

✓

Gima-Machines, BVBA Gravograph - Technifor NV/SA

✓ ✓

✓ ✓

Gühring, NV Haas Automation Europe NV

✓

Hammer-IMS NV

✓

Heidenhain, NV i.Revitalise NV

✓ ✓

✓ ✓ ✓

Lastek Belgium, NV LVD Company, NV

MEMA Machinery & Tools, NV Metanox, BVBA 66

Measuring systems

✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓

✓

Integrated sheet metalworking - Laser Punch - Bend

✓ ✓

✓

Mitutoyo Belgium, NV/SA

Other

Welding Consumables & accessories

Welding Machines & installations

Welding

Measuring machines & tools

Numerical control systems & accessories

Other

PLM

ERP

CAD/CAM

Software

PRODUCTS

✓

Oerlikon Balzers Coating Benelux, NV-SA ORBID, NV

✓

✓

OSG David Grinding Services, BVBA Prima-Power

✓

Produsoft, BVBA

✓ ✓

Renishaw Benelux BV

✓ ✓

Revimaxx NV RoboJob, NV

✓

✓

Quoting and estimating ✓

✓ ✓

Measuring systems

✓

✓ ✓ ✓ ✓

✓

Rösler Benelux, B.V.

✓ ✓

Sandvik Benelux, BV Savaco, NV

✓ ✓

✓

✓ ✓

✓

Seco Tools Benelux, SA-NV Siemens, NV-SA

✓

Sinvacon, BVBA

✓

SKS Machines, BVBA

✓

Stäubli Benelux, NV Tools & Dies Engineering, NV Trideus

✓

Valk Welding, NV

✓

van Waasdijk, NV

✓ ✓

Walter Benelux, NV

✓

Welding Company, NV

DTPS offline programming software MIS 2.0 Management Information System with weld quality traceability

✓

✓

✓ ✓ ✓ ✓ ✓

WSB Finishing Equipment, BV ZiggZagg, NV

67

Service, Spare parts & Repairs

✓

✓

ABB

✓

✓

✓

✓

Absolum Prolab Ad Ultima Group

software development for production automation ✓

✓ ✓

✓

✓

Adopt id PLM

✓

✓

✓

AMS Belgium bvba

✓

✓

✓

✓

ATS Applied Tech Systems

✓

✓

✓

✓

Buhlmann

✓

✓

✓

✓

✓

✓

✓

✓

✓

CadCorner Cadmes Belgium

✓

Other

Training

✓

Coating cutting tools

Integration

✓

Sharpening cutting tools

Installation

✓

Revision & retrofitting

Delivery

4D Cam

Services

✓

Cloos Benelux

✓

Automation

✓ ✓

✓ ✓

✓

✓ ✓

de Fruytier De Ridder TDR B.V.B.A.

✓

✓

✓

✓

✓

De Tollenaere

✓

✓

✓

✓

✓

DMG MORI BeLux

✓

✓

✓

✓

✓

Dormer Pramet

✓

ESAB

✓

✓

✓

Flexible Robotic Solutions

✓

✓

✓

✓

FormID

✓

✓

✓

✓

✓

Gelderblom CNC Machines

✓

✓

✓

✓

✓

✓

Gima-Machines

✓

✓

✓

✓

✓

Gravograph - Technofor NV/SA

✓

✓

✓

✓

FANUC Benelux

✓

✓

✓

✓

✓

✓

✓

✓

Gühring Haas Automation

✓

✓

HEIDENHAIN

✓

✓

✓

✓

i.Revitalise

✓

Lastek Belgium

✓

✓

✓

✓

✓

✓

✓

✓

✓

LVD Company nv

68

✓

✓

✓

✓

✓ ✓

✓

Measuring systems and controls

✓

Customer service support for LVD sheet metalworking machine tools and software

✓ ✓

MEMA Machinery & Tools

✓

✓

Metallic Bridges of Belgium

✓

✓

✓

✓

✓

✓

Oerlikon Balzers Coating Benelux

✓

Orbid

✓

✓

Consultancy, Recruitment

✓

OSG DAVID Grinding Services

✓

Prima-Power

✓

✓

Produsoft

✓

✓

Renishaw Benelux BV

✓

✓

✓

Revimaxx NV

✓

✓

✓

RoboJob

✓

✓

✓

Rösler Benelux

✓

✓

Sandvik Benelux

✓

Savaco

✓ ✓

✓

Siemens

✓

✓

Sinvacon

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓ ✓ Automation of the loading and unloading of CNC turning lathes and milling machines. ✓ Tools for metal cutting, deep hole drilling, dies, milling, turning, machining

✓

Seco Tools Benelux

✓ ✓

✓

✓ ✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

Tools & Dies Engineering

✓

Trideus

✓

✓

✓

✓

✓

✓

Valk Welding

✓

✓

✓

✓

✓

✓

van Waasdijk

✓

✓

✓

✓

✓

✓

Walter Benelux

✓

✓

✓

✓

✓

✓

✓

✓

✓

Welding Company WSB Finishing Equipment ZiggZagg

✓

✓

✓

✓

SKS Machines Stäubli Benelux

Other

✓ ✓

Coating cutting tools

✓ ✓

Sharpening cutting tools

✓

✓

Revision & retrofitting

✓

Service, Spare parts & Repairs

Integration

✓

Mitutoyo Belgium

Training

Installation

Metanox

Delivery

Services

✓

✓ ✓

Tools - Dies - Stamping

✓

✓

✓

✓ ✓ Additive Manufacturing, 7 axis Robot Milling, Lasercutting.

69

✓

✓

Finn-Power

✓

✓

FormID

✓

✓

I-Revitalise

✓

✓

✓ 3D-Post Processing Technology (AM Technology)

Rösler Benelux Trideus ZiggZagg

70

Other

3D Printers

✓

4D Cam

3D print products

3D Printing machines

DMG MORI BeLux

Printers

✓

✓

✓ ✓

3D Printed parts, Additive manufacturing, MJF, SLS, SLA, FDM, Printservice

BRANDED CONTENT

Wij zijn uw partner voor innovatieve glijslijpen straaltechniek Rösler Benelux B.V. is een dochteronderneming van het Duitse “Rösler Oberflächentechnik GmbH” en is gevestigd in Oss (NL) en Tubize (BE). De Röslergroep biedt met 15 eigen vestigingen en meer dan 150 handelsvertegenwoordigingen een wereldwijd dekkend netwerk en is daardoor altijd dichtbij haar klanten.

Rösler is de enige aanbieder ter wereld voor oppervlaktebewerkingen die de twee fundamentele technologieën glijslijpen en stralen in combinatie met industriële reinigingsinstallaties aanbiedt en bovendien alle componenten zelf ontwikkelt en produceert.

De producten en diensten van Rösler omvatten: - Glijslijpmachines; rondvibratoren, rechte vibratoren, centrifugaal installaties, etc.

- Kunststof en keramische slijp- en polijst media - Compounds en pasta’s voor het slijpen en polijsten - Proceswater behandelings- en recyclingsystemen - Straalinstallaties; hangbaan-, muldenband-, rollenbaan-, handstraal- en natstraalinstallaties - Straalmiddelen - Slijt en wisseldelen, her-bekledingen en aftersales ondersteuning - Revisie en retrofit van bestaande installaties

- Industriële reinigingsmachines; bandwasinstallaties, korfwasinstallaties en doorloopsystemen - Proces ontwikkeling en verbetering - Service verlening op uw installaties Onze nieuwste ontwikkeling is het creëren van AM Solutions als een merk van de Rösler Group. AM Solutions assisteert en ondersteunt u met een volledig assortiment aan services en technische oplossingen in de AM-procesketen. Onze diensten omvatten: consultatie voor nabewerking (productontwerp en printprocessen) hardware, aanbevolen afwerkingsof finishingprocessen, afwerkingsapparatuur, procesmedia voor geautomatiseerde nabewerkingen en oppervlakteafwerking van 3D vervaardigde componenten in een grootschalige productie– omgeving.

Als systeemaanbieder begeleiden wij u niet alleen op het gebied van procedures en producten. Ook het kwalificeren van uw medewerkers gaat ons aan het hart. Met de Rösler Academy geven wij in praktijkgerichte seminars, onze technologische kennis aan u door, zodat u kunt profiteren van een nog hogere productkwaliteit en betere beschikbaarheid van uw installaties.

www.rosler.com - www.am-postprocess.com

71

Embracing technology Embracing ambition Agoria: development through technology. We are paving the way for all technology-inspired companies in Belgium which seek to contribute to the world’s advancement by developing or implementing innovations. We are proud that more than 1,700 member companies, accounting for approximately 300,000 workers, are relying on the three pillars of our services: advice, business development and creating the ideal business climate. Follow us on www.agoria.be and https://twitter. com/agoriafr.

Give your company a boost with Agoria • Advice to entrepreneurs • Leading experts answer your questions on, among other topics, talent and the labour market, innovation, energy, the environment, socio-legal issues, wellbeing at work, taxation, the economic development of sectors and markets, regulations and standardization.

• Business development • Our Market teams help you promote your offering on the market, identify market opportunities for your products or services, and forge sustainable partnerships in Belgium and abroad. We are currently focusing on the following markets: Building & Urban Development, Energy, Financial Services, Food & Beverage, Healthcare, Transport & Mobility, Machine Construction / Production Systems, and Sports & Entertainment Events.

• Creating the ideal business climate • Through consultancy, tools, workshops and networking events, our Industry teams support you when it comes to meeting the – present and future – strategic challenges in your industry: Aeronautics, Space, Security & Defence Industries; Building, Contracting & Technical Services Industries; Digital Industries; Manufacturing Industries and Materials Industries; Telecom Industries.

• Experienced Policy units also defend your interests, lobbying at all levels of power.

• Member & employee benefits • Through its membership, your company and its employees obtain many exclusive discounts and other benefits.

72

2180001041_1_ADV_7901.indd 1

29-01-19 09:35

de mediapartner voor beroepsorganisaties

MEER VISIBILITEIT VOOR UW BEDRIJF DOOR TE ADVERTEREN OP WWW.AGORIA.BE

CAD / CAM / CNC engineering CNC Datacommunication CNC Software Development www.4dcam.be

Neem contact op met onze accountmanagers voor meer info.

015 56 99 95 - www.elma.be - info@elma.be

wwwagoriabe.indd 2

04-03-19 13:25

2190000064_1_ADV_7901.indd 1

05-02-19 09:57

HERMESSTRAAT 2 C – 1930 ZAVENTEM TEL +32-2-711.20.30 - FAX +32-2-725.25.30 E-mail : info@buhlmann.be Website : www.buhlmann.be

Milling machines - Lathes - Machining centres automatic lathes - Grinders - EDM machines Automation

Contact us for your optimal solution !

Our sales program for machine tools includes milling machines, drill centres, machining centres, CNC lathes, automatic lathes, grinding machines, tools sharpening machines, machines for wire and die sinking erosion, preset devices, accessories and consumables for machine tools. We also can offer automation and software for production management.

Our professional service department offers: Automation and robotization of your production, hotline for technical assistance, repairs, delivery of spare parts, training, startup, preventive maintenance, machine overhaul, sale of second-hand machines, expertise, rapid interventions and competitive rates for machine tools.

NL

FR

WWW.BUHLMANN.BE