How to Add an HP Printer to a Wireless Network HP printers can be added to your network in a number of ways, depending on the model of printer and your network configuration. We'll show you a few ways to do that. Before you get started, make sure your printer, computer, and network are turned on, functioning properly, and ready for action.
Using HP Auto Wireless Connect
Steps-1 Verify that your configuration is compatible with HP Auto Wireless Connect. order to use this method, your computer and network configuration must meet the following requirements: Your computer must be running Windows Vista or later (PCs), or OS X 10.5 (Leopard) and later (Macintosh). Your computer is connected to an 802.11 b/g/n wireless router over a 2.4 GHz connection. 5.0GHz networks are not currently supported by HP (1/1/2013)Your computer's OS is in control of the wireless adapter Your computer uses a wireless connection to your network and the operating system Your computer uses a dynamic IP address, not a static one.
Steps-2 Download the latest printer software from HP The address is http://www.hp.com/go/customercare. Ensure that the software you choose is meant for both your printer model and your computer's operating system.
Steps-3 Run the installer
Follow the on-screen instructions until the installer prompts you for the connection type. Select 'Network (Ethernet/Wireless)"' as the connection type, then choose Yes, send my wireless settings to the printer (recommended)". The installer will perform the rest of the setup automatically. Note: during setup of HP Auto Wireless Connect, your computer will be temporarily disconnected from the internet. Make sure you have finished any online downloads or completed other internet activity before proceeding. Note: if this options is not offered during installation or if it is not successful, you will be guided to use another wireless setup method.
Contact
For any Technical Issues Dial HP Technical Support Number 1800-894-139 Original Sourcehttp://bit.ly/2mFPtK8