Miniwoody design Mario Cucinella
LED version
Discharge version
FLOODLIGHTS WALL-MOUNTED FITTINGS IN-GROUND SPIKE FITTINGS
iGuzzini
• Floodlight for use with halogen, discharge lamps and LEDs. • The fixture is installed into the ground, wall-mounted (with a fisher) and on branches. • The fixture ha san optical assembly and base. • Optical assembly, arms, base, frame, box, and caps made of aluminium alloy, with liquid acrylic paint that is highly resistant to UV rays and atmospheric agents. • Sodium-calcium tempered sealing glass, transparent and colourless, is 4 mm-thick, and secured with captive screws. • Vertical and horizontal orientation, with the possibility of blocking the aim. • Frame has slots for rainwater drainage. • Available accessories: refractor, wall-washer screens, spikes for ground installation, and various installation accessories • All screws are A2 stainless steel. • The technical characteristics of the fitting comply with EN60598-1 standard. • IP66 IK08 • F seal • ENEC approval • Class of Insulation I/II LED version • Personalised grey silk screen on the glass. • Optics with plastic lens (spot and medium); spill-ring for visual comfort. • Plate for LED support made of anodized black aluminium. • Circuit equipped with three 6700K white, “Warm White” 3250K or blue LEDs (other colours available upon request). • Electronic power supply: 3W, 220÷240V 50÷60Hz. • Double PG11 cable clamp for pass-through cable, made of black polyamide. Ideal for cables with diameters between 6,5 and 11,5 mm. • Equipped with clamp for pass-through grounding cable. • Filters for white LEDs available (cyan, magenta, yellow and orange). • Class of Insulation II
Spill-ring for LED version
Low voltage electronic version
Adjustmen of beamspread Flood 6° - 24° Spot 24° - 56°
Discharge version • Optical assembly connected to the control gear compartment via silicone fibre cables with fibres made of protection steel. • 35W HIT version complete with black power supply cable L=1700mm connected to IP67 external component-holding box of PPS high-performance thermoplastic material, with black colour finish. The component box incorporates the electronic control gear and is prepared for through wiring with M24x1.5 double cable clamp made of stainless steel, suitable for cables with diameter 7÷16mm. • M14x1 nickel-plated brass cable gland for connection between the cable compartment and the lamp compartment. • 99.96% ultra pure aluminium sheet reflector. • PGJ5 lamp holder with cables • Lamp-holder support made of galvanized steel. • PG11 cable clamp made of black polyamide. Ideal for cables with diameters between 6,5 and 11,5 mm. • Electronic power supply: 20W, 220÷240V 50÷60Hz. • For public applications, in case of accessible space, versions with armoured cable with stainless steel braid are available on demand. • Class of Insulation I Low voltage electronic version • Reflector made of 99,96% ultrapure aluminium steel sheet. • GY6.35 lamp holder with cables. • Lamp-holder support made of die-cast aluminium • Device that regulates light beam width located in the rear. • PG11cable clamp made of black polyamide. Ideal for cables with diameters between 6,5 and 11,5 mm. • Electronic transformer: 50W, 220÷240V 50÷60Hz, dimmable with IGBT technology. • Class of Insulation II
Cascade connection and double PG LED version
Powers 35 - 50 W Low voltage version
Electronic control gear Low voltage version
Electronic control gear Discharge version
Version with armoured cable
285