iTeka design Mario Cucinella
Dual adjustment and mechanical locking of the aiming system
Outlets for water drainage (up and down light installation)
High mechanical resistance of aluminium pole 4 mm thick dimension 45x70 mm (h 1000/2500 mm)
High mechanical resistance of steel pole 3 mm thick dimension 50x80 mm (h 3500 mm)
FLOODLIGHTS BOLLARDS FOR RESIDENTIAL/PUBLIC AREAS WALL-MOUNTED FITTINGS IN-GROUND SPIKE FITTINGS
iGuzzini
• Direct lighting system for use with discharge, fluorescent, halogen lamps and white LED. • Available for the following versions: pole (h=1.000, 2.500 and 3.500 mm), wall-mounting (up/down light), shop windows, and ground/pavement. • Optical assembly and frame made of die-cast aluminium alloy, liquid grey acrylic paint that is highly resistant to atmospheric agents and UV rays. Sodium calcium tempered transparent glass is 4 mm thick. Fastened to the frame with silicone. The frame is fastened to the assembly with two AISI 304 stainless steel captive screws and two AISI 303 hinge pin; 50 Shore silicone basket between the two. • Asymmetric longitudinal reflector made of 99.96% ultrapure aluminium which has undergone a dual shine and anodic oxidation process (width of 5/6 micron). • Asymmetric transversal reflectors made of 99,85% ultrapure aluminium which has undergone an anodic oxidation process (width of 2/4 micron). • Electronic control gear for discharge, fluorescent and LED versions; halogen version has mains voltage. LED version Vin 220-240Vac / 50-60 Hz.
• Pole versions have: support made of extruded aluminium (h1.000 e 2.500mm), fastening plate and cover made of die-cast aluminium alloy. Wiring box (accessory) with double PG for pass-through cables. • Support for 3500 mm height made of EN10025-S235JR hot-galvanised 70-micron steel treated with texturised powder paint. • Wall-mounting versions have: die-cast aluminium alloy base and arm for show windows made of extruded aluminium. The base is ready for double PG11 EPDM cable clamp for pass-through cables. • Available accessories: coloured filters, diffusing glass, safety grill, and louvres that can be installed as a couple; spike for ground installation. • All screws are A2 stainless steel. • Light flow upward dispersion is null, in compliance with the most restrictive norms that govern against light pollution. • The technical characteristics of the fitting comply with EN60598-1 standard. • IP66 IK09 • F seal • ENEC approval (except versions LED) • Class of Insulation II (Class I upon request)
Photo: Carlini Paolo
No upward emission of light flow
Double PG for pass-through cable
Milan - Italy
Class II (Class I upon request)
327