FRAME/BODY PANELS/EXHAUST SYSTEM
PILLION SEAT ASSEMBLY 1 N •m
(0 .15 kgf •m ,
1 .1 lbf •ft)
REAR COWL
ry
g7
or V
Gently spread the sides to fit over the regulator/ rectifier .
Install the rear cowl over the side rail being careful not to damage the wire harness .
SCREW
TRIM CLIP
Install the two trim clips . Install and tighten the mounting screws to the specified torque . TORQUE : 1 N •m (0 .15 kgf •m , 1 .1 Ibf •ft)
4
REAR COWL Install the lower trim clips .
TRIM CLIP
2-4