Scientific Journal of Impact Factor (SJIF): 5.71
e-ISSN (O): 2348-4470 p-ISSN (P): 2348-6406
International Journal of Advance Engineering and Research Development Volume 5, Issue 03, March -2018
Reinforcement Detailing of RCC Structure using Staad Pro 1,2,3
Ramya Krishnan 1, V.S Satheesh 2, S.Suresh Babu 3 Department of Civil Engineering, Adhiyamaan College of Engineering
Abstract - Structural Engineers are stiring for the most efficient and economical design with accuracy in solution while ensuring that the final design of the building must be serviceable for its intended function over design lifetime. In the present work, a G+3 structure is analyzed and designed using civil engineering application software Staad Pro. Nowadays for quick and better accuracy the software techniques are used. Staad Pro is the one among the leading softwares for the design of the structure. For this project, an ongoing project has been selected “Spiher Medical Academic Block Building” which is executed in Hosur, Krishnagiri District. The structure is analyzed to find the shear force, bending moment, deflections and reinforcement detailing for the structural components of the building such as slab, beam and column to develop the economical design. The reinforcement detailing is very important since a huge number of structures fail due to improper detailing methods. Keywords- STAAD.Pro, Axial Force, Shear Force, Bending Moment, Lateral Drift, Lateral Displacement. I.
INTRODUCTION
The design of a simple building used to take at least a week during earlier times. However, the design of complicated structures can now be done within a week’s time and with more accuracy using a host of software available in the market. Staad Pro is the present day leading design software in the market. Many design companies use this software for their project design purposes. Our project having 46.895m x 71.95m, G+3 structure is modeled using Staad Pro. The height of the each storey is 3.8m and the total height of the structure is 15.2m. Analysis and design of the structure are done from which the shear force, bending moment, the area of steel, number of bars, diameter of the bars and the reinforcement detailing used in each components are obtained. Detailing is very important like the designs since proper detailing of engineering designs is an essential part in the planning and the engineering process as some of the most devastating collapses in history have been occurred due to defective detailing. Reinforcement detailing is prepared for each design results and then compared and checked if it satisfies the codal provision. Total reinforcement steel quantity and the concrete quantity representing the volume of concrete in the slab, beam and column are obtained. II.
DESCRIPTION OF PHARMACY BUILDING
2.1 Plan Details Total Building Area : 10784 Sq.m or 116000 Sq.ft Area of Single Storey : 2696 Sq.m or 29000 Sq.ft Number of stories : G+3 Total Height of the building : 15.2 m Height of each Storey : 3.8 m Total number of column : 136 Support Condition : Fixed
Figure 1. Ground floor plan of the Pharmacy Building @IJAERD-2018, All rights Reserved
319