Guide to Install a Concrete Post Fencing at Your Homes If you want to install a fence at your home for security reasons, then opting for a concrete fence will be a wise choice. Concrete is considered the best material to build a fence as it offers durability and strength, and it is also quite easy to install. Additionally, concrete is a material that lasts long without the need for much maintenance because it is resistant to rotting. Additionally, concrete can easily withstand the high pressure of winds. The Process to Install Concrete Fencing: If you are looking for an easy hack to install concerete fence here’s an easy guide to install this fence: 1.
Dig a Hole: You will need to dig appropriate holes for your Concrete Post Fencing. To begin, use a gravel board to mark out the hole and measure the distance between each fence post. Ideally, it is suggested to dig a 2-foot-deep hole for stability.
2.
Position the Post: Once you dig the whole now it’s time to position the posts in the whole and check if they aligned properly or not. Do not forget to take the 10 feet tall if you want the height of the pole to be 8 feet long, for accommodating a 2-foot height underground.
3.
Add the Concrete in the holes: Check that your concrete gravel boards fit snugly between the posts. Pour approximately 40 kg of quick-set concrete into the holes and mix it in. Should always add the appropriate amount of water and hold the posts until the concrete begins to set.
4.
Add Fence Panels: After pouring concrete into the posts, you must wait overnight for the posts to settle before attaching fence panels to the posts. Enjoy your new fence by slotting your fence panels.
There are three major types of Concrete Post Fencing. The first is "corner posts," which help accommodate two fence panels at the proper angle. The "intermediate post" is used to connect two fence panels in a straight line, and the "end post" is used to complete the end of the fence panel run. You can easily find all types of fences at any online store.