● Serial port provides 1500W surge protection and 15kV electrostatic protection
● Support 12~36VDC wide voltage input
DDAM-8520 is an industrial-grade Serial converter with bidirectional conversion between RS-232 to RS-485/422 and also a RS-485/422 repeater. Thus this device can be used for bidirectional data conversion between serial signals like RS-232 to RS-485/422. It can also be used as a repeater for RS-485 and RS-422 transmission. It provides 1 RS-232 serial port and 2 RS-485/422 serial ports. The Serial port has a 1500W surge protection, 15kV electrostatic protection and 3kV photoelectric isolation protection, thus it effectively prevents devices from being damaged due to surge or high voltages in noisy environments.
ICF-1170I Series
Industrial CAN-to-fiber converters
Product Features
● Transmits up to 2 km over optical fiber
● Converts CAN signals to fiber and fiber to CAN signals
● Baudrate up to 1 Mbps
● Dual power inputs for redundancy
● DIPswitch for 120 ohm terminal resistance
● DIPswitch for fiber test mode
● LEDs for FiberTX, Fiber RX, Power 1, Power 2
● Wide temperature model available for -40 to 85°C environments
● Fully compatible with the ISO 11898 standard
The ICF-1170I series CAN to fiber converters are used to convert CAN signals from copper to optical fiber.The converters come with 2 kV optical isolation for the CANbus system and dual power inputs with alarm contact relay to ensure that your CANbus system will remain online.
TCC-120I
Industrial RS-422/485 converters/repeaters with 2 kV isolation
Product Features
● Boosts serial signal to extend transmission distance
● Wall mounting or DIN-rail mounting
● Terminal block for easy wiring
● Power input from terminal block
● DIPswitch setting for built-in terminator (120 ohm)
● Boosts RS-422 or RS-485 signal, or converts RS-422 to RS-485
● 2 kV isolation protection
The TCC-120I are RS485 repeaters with isolation designed to extend RS-422/485 transmission distance. Both products have a superior industrial-grade design that includes DIN-rail mounting, terminal block wiring, and external terminal block for power. In addition, the TCC-120I supports optical isolation for system protection. TheTCC-120 andTCC-120I are ideal RS-422/485 converters/repeaters for critical industrial environments.
TCC-82
Port-powered RS-232 4-channel isolator
Product Features
● 4 channels of 4 kV RMS isolation for 1 minute
● External power source supported but not required
● Automatic baud rate detection
● Compact size
TheTCC-82 is a RS232 isolator, which provides full electrical isolation for bi-directional serial communication between two RS-232 devices in a compact, industrial-grade package. Both sides of an RS-232 connection are isolated optically to provide perfect protection against lightning surges, accidental high voltage shorts, and ground loops. The built-in, wide range isolators are tested to ensure that they can withstand more than 4 kV rms input to output for 1 minute. This means that the TCC-82 not only meets the requirements of general serial data communications, but also the high standards required by industrial automation and medical applications. The TCC-82 RS232 isolator protects the TxD and RxD data lines, and also
protects the RTS and CTS handshake lines for a total of 4 isolated channels to provide complete protection of your RS-232 applications.